How Do I Know If I Have 32 Or 64 Bit Windows 10

Contents

32-bit and 64-bit Windows: Frequently asked questions

Answers to some frequently asked questions concerning the 32-bit and 64-bit versions of Windows are provided here. Upgrading from the 32-bit version of Windows to the 64-bit version of Windows necessitates a hard drive reformat, the installation of the 64-bit version of Windows, and the reinstallation of anything else that was previously installed on your computer.

Windows 10 and Windows 8.1

  1. Select the Startbutton, then SettingsSystemAbout from the drop-down menu. Select About settings from the drop-down menu. System type may be found on the right side of the screen, under Device specs.

Windows 7

  1. Select the Start button, then right-click Computer and select Properties from the drop-down menu
  2. Look for the system type under System

A 64-bit version of Windows can only be installed on a computer that has a CPU that is capable of running a 64-bit version of Windows. Most of the advantages of utilizing a 64-bit operating system become obvious when you have a significant amount of random access memory (RAM) installed on your computer, often 4 GB or more of RAM. When running many programs at the same time and switching between them often, a 64-bit operating system can be more responsive than a 32-bit operating system because a 64-bit operating system can manage huge quantities of memory more effectively than a 32-bit operating system.

To determine if your CPU is capable of running in 64-bit mode, perform the following tests.

Windows 10 and Windows 8.1

  1. Select the Startbutton, then SettingsSystemAbout from the drop-down menu. Select About settings from the drop-down menu. System type may be found on the right side of the screen, under Device specs.

Windows 7

  1. Select the Startbutton, followed by the Control Panel option. Search for Performance Information and Tools in the search bar, and then pick Performance Information and Tools from the list of results that appears. SelectDetailed performance and system information may be viewed and printed
  2. System type and 64-bit capable are both displayed in the Systemsection, and you can check if you are currently running a 64-bit version of Windows underSystem type and if you are presently running a 64-bit version of Windows underSystem capable. (If your computer is already running a 64-bit version of Windows, the 64-bit capablelisting will not be seen.)

Learn how to pick between the 64-bit and the 32-bit versions of Microsoft Office.

How Do I Know if I’m Running 32-bit or 64-bit Windows?

Determining whether you’re running a 32-bit or 64-bit version of Windows is straightforward, and the necessary tools are already included in the operating system’s installation. Here’s how to figure out what kind of race you’re participating in. It makes a significant difference whether you are using 32-bit or 64-bit versions of Windows. Installing and operating on a 64-bit version of Windows results in improved security, as well as the ability to utilise more RAM on your computer. Furthermore, if you have a PC that supports it, making the conversion from 32-bit to 64-bit Windows is completely free—even if it does necessitate a little amount of effort.

RELATED: The main difference between 32-bit and 64-bit Windows is the amount of memory they can hold.

Checking Your Version of Windows 10

Using the Windows+i keyboard shortcut, open the Settings app and choose SystemAbout. This will tell you if you’re running a 32-bit or 64-bit version of Windows 10. Look for the “System type” entry on the right-hand side of the screen. It will display two pieces of information: whether you are running a 32-bit or 64-bit operating system, as well as if you have a CPU that is capable of running 64-bit applications.

Checking Your Version of Windows 8

If you’re using Windows 8, go to Control PanelSystem and click on Start. You may simply go to Start and type “system” into the search box to find the page more quickly. If your operating system and CPU are 32-bit, look for the “System type” line to see if they are 32-bit or 64-bit.

Checking Your Version of Windows 7 or Vista

You can access the properties of your computer if you’re running Windows 7 or Windows Vista. To do so, go to Start, right-click “Computer,” and then select “Properties.” If your operating system is 32-bit, search for the “System type” entry on the “System” page to see whether it is a 64-bit operating system.

It should be noted that, in contrast to Windows 8 and 10, the “System type” entry in Windows 7 does not indicate whether or not your system is capable of running in 64-bit mode.

Checking Your Version of Windows XP

It’s basically pointless to verify whether or not you’re using a 64-bit version of Windows XP because you’re nearly certainly running a 32-bit version of the operating system. To double-check, open the Start menu, right-click “My Computer,” and then select “Properties” from the pop-up menu that appears. Go to the “General” tab in the System Properties box to find out more. If you’re using a 32-bit version of Windows, you won’t see anything here other than “Microsoft Windows XP,” which is the default.

IN CONNECTION WITH:Why Are the Majority of Programs Still 32-Bit on a 64-Bit Version of Windows?

You may then pick whether you wish to utilize 64-bit or 32-bit applications once you’ve worked it out.

How to Tell If You Have Windows 64-Bit or 32-Bit

Are you unsure if the Windows version you have installed is 32-bit or 64-bit? In the case of Windows XP, the likelihood is that it is 32-bit. If you’re running Windows 11, Windows 10, Windows 8, Windows 7, or Windows Vista, the likelihood that you’re running a 64-bit version of the operating system increases significantly. You don’t want to take any chances with anything like this, of course. Knowing whether your copy of Windows is 32-bit or 64-bit becomes extremely crucial when installing device drivers for your hardware and when deciding between different types of applications, among other situations.

The particular actions required, on the other hand, vary depending on whatever operating system you’re running.

More information about this may be found at the very bottom of this page.

Windows 11, Windows 10Windows 8: 64-Bit or 32-Bit?

  1. To access the Control Panel, click on the Start button. From the Power User Menu, you can verify your Windows system type considerably more quickly, but it’s likely to be faster that way only if you’re using a keyboard or mouse. Pick System from the drop-down menu, and then skip to Step 4
  2. Select System and Security from the Control Panel drop-down menu. If your Control Panel display is set to eitherLarge icons or Small icons, you will not be able to see the System and Securitylink. Assuming this is the case, chooseSystemand then skip to Step 4
  3. ChooseSystem It is also possible to access this page by performing the command control /name Microsoft. Systemcommand executed from the Run or Command Prompt window
  4. Locate theDevice specificationsarea (Windows 11) or theSystemarea (Windows 10) by hovering your cursor over the huge Windows logo. It will say either 64-bit Operating System or 32-bit Operating System next to System type, depending on the version of Windows you are using. It is indicated by the second piece of information, either x64-based CPU or x86-based processor, what type of hardware architecture is used. Generally speaking, you may install a 32-bit version of Windows on any type of computer, whether it is an x86 or an x64 system
  5. But, a 64-bit edition of Windows can only be installed on x64 hardware
  6. You should now be able to tell if Windows 11/10/8 is 32- or 64-bit

Windows 7: 64-Bit or 32-Bit?

  1. Select System and Security from the StartControl Panel menu. You can’t seem to find it? Choose System and then go to Step 4. Select System and then advance to Step 4. Locate theSystemarea, which is located below the huge Windows logo, and search for theSystem typeamong the various data that pertain to your machine. This will report either a 32-bit operating system or a 64-bit operating system, depending on the configuration. The Windows 7 Starter Edition does not come in a 64-bit version
  2. You should now be able to tell if you have Windows 7 64-bit or 32-bit

Windows Vista: 64-Bit or 32-Bit?

  1. Control Panel may be found in the Start menu
  2. System and Maintenance can be found under System and Maintenance. This link will not be shown if you are viewing the Control Panel in the Classic View. To avoid this, simply open System and then go to Step 4
  3. SelectSystem
  4. Look for theSystemarea to the right of the large Windows logo. There is a section named System type within that section. To determine if you have Windows Vista 32-bit or Windows Vista 64-bit, look for the words 32-bit Operating System or 64-bit Operating System in the title bar of this page. The Windows Vista Starter Edition does not come in a 64-bit version
  5. You should now be aware of whether you have Windows Vista 64-bit or 32-bit installed.

Windows XP: 64-Bit or 32-Bit?

  1. Select Start, then Control Panel, thenPerformance and Maintenance from the drop-down menu. To find this link if you don’t see it, openSystem and then scroll down to Step 4
  2. ChooseSystem
  3. The Systemarea may be found to the right of the Windows logo on the desktop. It is necessary to be on the General tab of the System Properties window. UnderSystem, you will find the following basic information about the version of Windows XP that is currently installed on your computer:
  • Microsoft Windows XP Professional Version signifies that you are running Windows XP 32-bit software. It suggests you’re using Windows XP Professional x64 Edition Version, which indicates that you’re running Windows XP 64-bit.
  1. There are no 64-bit editions of Windows XP Home or Windows XP Media Center Edition available for purchase or download. The 32-bit operating system that comes with either of these Windows XP versions is what you’re running on your computer. You now know if your computer is running Windows XP 64-bit or 32-bit.
You might be interested:  How To Check Graphics Card Windows 10

Check the ‘Program Files’ Folder Name

However, while this technique isn’t quite as simple to comprehend as using the Control Panel, it does give a quick way to determine if you’re running a 64 or 32-bit version of Windows, which is particularly handy when working with a command line program that requires this information. If your version of Windows is 64-bit, you will be able to install both 32-bit and 64-bit software applications, resulting in two separate “Program Files” directories on your computer. If your version of Windows is 32-bit, you will be able to install only 32-bit software packages.

Allow me to explain this in a simple manner.

  • Default 32-bit location is C:Program Files (x86)
  • Default 64-bit location is C:Program Files

In Windows 10 64-bit, the ‘Program Files’ folders are located in the Documents and Settings folder.

32-bit versions of Windows have only one folder: the system32 folder.

The ‘Program Files’ folder is located in the Windows 10 32-bit operating system. This indicates that you are using a 32-bit version of Windows if just one folder is discovered when you check this location. If there are two “Program Files” folders, you are very certainly using a 64-bit version of the operating system. Thank you for informing us about this!

4 Ways to Check If Windows 10 System Type is 32-bit or 64-bit

This article is for you if you are unsure about whether version of Windows 10 (32-bit or 64-bit) is installed on your computer at the moment. We’ll teach you how to determine if you have a 32-bit or 64-bit version of Windows 10.

  • Part 1: Distinction between the 32-bit and 64-bit versions of the software
  • Part 2: Determine whether you have 32-bit or 64-bit Windows 10 installed.

What’s the difference between 32-bit and 64-bit of Windows?

It is the way a computer’s processor (also known as a CPU) handles information that the phrases 32-bit(x86) and 64-bit(x64) are used to describe. In comparison to a 32-bit system, a 64-bit version of Windows is more efficient when dealing with large quantities of random access memory (RAM). System Type informs you if you’re running the 32-bit or 64-bit versions of Windows 10 at the time of writing. It also informs you whether or not your computer is compatible with the 64-bit version. Using a 64-bit operating system on an x64-based CPU shows that you are running a 64-bit version of Windows 10 on an x64-based processor.

Generally speaking, in order to operate a 64-bit version of Windows, your computer must be equipped with a CPU that supports 64-bit operations.

How to tell if your computer is running 32-bit or 64-bit Windows 10

Press the Windowslogo key on your keyboard at the same time as the Pause/Break key on your keyboard. This will instantly launch the System window, which will allow you to determine if your Windows 10 system is 32-bit or 64-bit in nature.

Way 2: Check Windows 10 system type from Settings

Step 1: Open the Settingsapp by pressing the Windows key and selecting System. To find out if you’re running a 32-bit or 64-bit version of Windows 10, go to the About menu on the left side of the screen and then click Device specs on the right side of the screen.

Way 3: Check Windows System type in System Information

Step 1: To open the Run dialog box, press the Windows key + R together. Type msinfo32 in the box and hit Enter. The System Information window will be shown as a result of this action. To determine if your Windows 10 system is anx86-based PC or anx64-based PC, go to Step 2: SelectSystem Summaryon the left side of the screen. On the right side of the screen, you can see whether your system is anx86-based PC or anx64-based PC.

Way 4: Using Command Prompt

Step 1: In the “Type here to search” box on the left side of the taskbar, type cmd to begin searching. When the Command Prompt shortcut appears in the search results list, click Enter to bring up the Command Prompt in full screen mode.

Using the Command Prompt window, type systeminfo and click Enter to bring up the results. Your system information will be presented on the screen, and you will be able to determine if your Windows 10 operating system is 32-bit or 64-bit.

How to Determine If You Have a 32-bit or 64-bit CPU

Computer Hope’s last update was on December 5, 2021. The procedures to detect whether your computer has a 32-bit or a 64-bit processor (CPU) are dependent on the operating system that has been installed on it. The following are the actions to take in order to ascertain the processor type for Windows, Mac, and Linux systems.

Windows 8 and 10

In order to identify your CPU type and the number of bits your processor has in Windows 8 and Windows 10, follow the instructions outlined below.

  • In the Windows search box, type system information and then click on the System Information button to display the results.

Alternatively, if you do not have a search box (because you have deactivated it), you can type the following:

  1. By hitting the Windows key and the letter E, a File Explorer window will appear. Right-click This PC in the left-hand sidebar. Properties may be found in the context menu. The System Properties window appears on the screen.
  1. The System Typecan be found in theSystem Propertieswindow, which contains a list of your operating system and CPU type.

Tip TheProcessorline may be used to determine the processor’s manufacturer (for example, AMD or Intel) and model number.

Earlier versions of Windows

Follow these procedures if you’re using an earlier version of Windows.

  • Open the StartmenuAll Programs by using the ESC key. The Accessoriesfolder should be opened first, then the System Toolsfolder. Make a selection from theSystem Information option in the System Tools folder.

Look for theSystem Typeoption beneath theItemcolumn on the right-hand side of the System Information window. The related value, found in theValuecolumn, will inform you of the type of CPU that is installed on the PC. If the System Typevalue contains the string “x86,” the CPU is a 32-bit processor. If the System Typevalue contains the string “x64,” the CPU is a 64-bit processor.

Determine if using 32-bit or 64-bit version of Windows

Microsoft Windows is offered in two different versions: 64-bit and 32-bit. 32-bit CPUs can only run 32-bit versions of Windows, and these are the only ones available. 64-bit CPUs, on the other hand, may execute either the 64-bit or the 32-bit versions. To check if the version of Windows installed on your computer is 32-bit or 64-bit, select your operating system and follow the on-screen instructions.

Determine if Windows Vista, 7, 8 and 10 is 32-bit or 64-bit

  1. Hold down the Windows key and the Pause key at the same time. System type is listed next to 32-bit Operating System if you are running a 32-bit version of Windows, and 64-bit Operating System if you are running a 64-bit version of Windows in the System pane. Below is a photo of this window as well as an example of it

Determine if Windows XP is 32-bit or 64-bit

  1. Open the System icon in the Control Panel by pressing and holding the Windows key and the Pause key at the same time. If the textWindows XP appears on the General tab of the System Properties box, this indicates that the machine is running the 32-bit version of Windows XP on it. If it has the text, it is OK. Microsoft Windows XP Professional x64 Edition, which indicates that the computer is running the 64-bit version of Microsoft Windows XP

Determine if Windows 2000 and prior is 32-bit or 64-bit

32-bit Windows operating systems are available for download on the Microsoft website. Neither of these operating systems is available in a 64-bit version.

Apple macOS

To get the Apple menu bar on the Mac, select the Apple symbol from the menu bar. In the Apple menu, select theAbout This Macoption to learn more about your computer. More information may be found in theAbout This Macwindow by selecting theMore Infooption. Locate theProcessor Nameattribute in theHardwaresection of the configuration file. Once the CPUs have been listed, conduct an Internet search using the processor name as a keyword to identify whether the CPU is a 32-bit or a 64-bit processor.

Processor 32-bit or 64-bit
Intel Core Duo or Solo 32-bit
Intel Core 2 Duo 64-bit
Any Intel Xeon processor 64-bit
Intel Core i3 64-bit
Intel Core i5 64-bit
Intel Core i7 64-bit

As indicated in the table above, all of the most current Mac computers have CPUs that are 64-bit in nature.

Linux

Access the command line interface of the Linux operating system and type the following command into the terminal. grep flags /proc/cpuinfo is a command that searches for CPU information. Look for the word “lm” in the output of the command. If the string lmis is detected in the output, the CPU is 64-bit. This means that if you don’t seelmor see the numbers 386, 486, 586, or 686 in the result, then the CPU is 32-bit. The following is an example of the output of the command above with the information removed.

fpu vme de pse fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat mtrr pge mca cmov pat DTS pse36 clflush acpi mmx fxsr sse sse2 ss ht pbe syscall arch perfmon pebs bts rep good pni monitor ds cpl est tm2 ssse3 cx16 xtpr lahf lm lahf lm nxlm

Determine if the Linux kernel is 32-bit or 64-bit

You may discover if your Linux kernel is 32-bit or 64-bit by performing the command below, which makes use of theuname command. uname -a is an abbreviation for unnamed -a. This command would result in output that looked similar to the example output shown below: SMP Tuesday, February 12th, 00:15:43 EST 2008×86 64×86 64 GNU/Linux If you see the string x86 64 in the result, this shows that the processor is x86 and that it is 64-bit as well.

32-Bit vs. 64-Bit OSes: What’s the Difference?

There are many different methods to count, but when it comes to computers, there are only two options: 0 and 1 (binary). Each of them is referred to as a “bit.” That means that for 1-bit computing, you have two potential values; for 2-bit computing, you have four possible values; and for 3-bit computing, you have eight possible values (2 to the third power, aka 2 cubed). Continue exponentially and you will ultimately arrive to 32-bit (2 to the 32nd power) values worth 4,294,967,296; 64-bit (2 to the 64th power) values worth 18,446,744,073,709,551,616; and 128-bit (2 to the 128th power) values worth 4,294,967,296.

A lot of bits, and the statistics demonstrate just how much more powerful a processor can be when it is capable of supporting higher-bit processing capabilities.

This is due to the fact that the processors within computers (including smartphones) and the software operating on those chips make significant advancements in terms of supporting a new number every few years.

  • Historically, the Intel 8080 microprocessor allowed 8-bit computing
  • In 1992, Windows 3.1 was the first 16-bit desktop version of Windows
  • And in 2003, AMD launched the world’s first 64-bit desktop processor. Apple released Mac OS X Snow Leopard in 2009, which was the first 64-bit operating system
  • The iPhone 5s was the first smartphone to have a 64-bit processor (the Apple A7) in 2014.
You might be interested:  How To Install Ffmpeg Windows 10

It should go without saying that 64-bit, which is frequently referred to as x64, is capable of more than 32-bit. You may be familiar with the phrase 32-bit asx86, which initially referred to any operating system that had the instruction set necessary to run on Intel processors such as the 8086 through the 80486. In today’s world, you are very certainly already using 64-bit processors and 64-bit operating systems, which in turn are executing 64-bit applications (for mobile devices) or programs (on the desktop, to settle on some nomenclature).

For example, Windows 7, 8, 8.1, and 10 were all available in either 32-bit or 64-bit versions.

Identify a 64-Bit OS

It is almost certain that your processor is 64-bit if you are running Windows on a computer that is less than ten years old, but it is possible that you have installed a 32-bit version of the operating system. It’s not difficult to double-check. For more information on Windows 10, go to SettingsSystemAbout or typeAboutin the Windows 10 search bar. You’ll find it under theDevice specs section, under System type: “64-bit operating system, x64-based CPU,” which indicates that you’re covered. Mac users don’t have to be concerned about this because MacOS has been exclusively 64-bit for a long time.

As of the most recent version (10.14 Catalina), 32-bit programs on a Mac are no longer officially supported, however we have a method for running 32-Bit applications on MacOS Catalina if you want to try it out. If you really must.

Why 32-Bit at All?

Why would you want to install a 32-bit operating system on a computer? The primary reason is because you have a 32-bit CPU, which necessitates the usage of a 32-bit operating system. It’s improbable that we’ll ever see a CPU like this. Intel began manufacturing 32-bit processors in the 80386 family as early as 1985, and by 2001, the company was offering 64-bit CPUs. If you’ve purchased a computer since the Pentium D processor was introduced in 2005, it’s improbable that the computer contains just a 32-bit instruction set.

  1. It’s possible that any subsequent upgrades, if any, did not bring your installation up to 64-bit status.
  2. Using software such as 64bit Checker, you may assess whether or not your PC is truly suitable for full 64-bit operation.
  3. Installing a 32-bit operating system on a 64-bit architecture machine is possible, but it is not recommended.
  4. Installing more RAM on a PC running a 32-bit operating system has little effect on performance.
  5. This should serve as the clearest indication possible: the officially supported maximum RAM on Windows 10 is 2 terabytes (terabytes) (or 128GB on Windows 10 Home).
  6. That is the same as one million trillion terabytes or one billion billion gigabytes.
  7. (In any case, it makes purchasing a new laptop with 16GB of RAM rather lackluster, don’t you think?
  8. Wider data routes, higher integer sizes, and memory addresses with eight octets are all possible.

Programs in 64-Bits

In addition, you may discover that some of the products you download for your desktop operating system are available in both 32- and 64-bit configurations. As an example, Firefox has “Windows 32-bit” and “Windows 64-bit” configuration choices (as well as “Linux” or “Linux 64-bit”—the macOS version is only available in 64-bit configuration). What is the point of doing that? Because 32-bit operating systems are still available for certain people. The software on those computers must be in 32-bit format; in most cases, they are unable to even install 64-bit programs, let alone operate them.

A 64-bit operating system, on the other hand, may handle a 32-bit software; in fact, Windows, in particular, has built in an emulation subsystem for this purpose, known as Windows32 on Windows64, or WoW64.

Recommended by Our Editors

Check your C: drive from time to time; you’ll see two Program Folders: one for 64-bit programs and another named Program Folders (x86) that is only dedicated to 32-bit apps. You’ll be surprised at how much 32-bit code is still floating around in the wild. On the Mac, you’re less likely to come across anything that’s 32-bit, which is why Apple is prohibiting 32-bit programs under Catalina, or at the very least attempting to do so. You can, however, check your applications. SelectAbout this Mac from the Apple menu, then click System Report, and then pick all of the apps listed under Software from the drop-down menu.

The majority of people will say yes.

A Bit About Mobile 64-Bit

As previously stated, Apple’s A7 chip was the world’s first 64-bit CPU to be integrated into a mobile phone (the iPhone 5s). Apple demanded in 2015 that all iOS software be upgraded to version 64. Running a 32-bit program on the most recent versions of iOS resulted in a “not optimized” warning, which said that “using it may have an adverse effect on overall system performance.” If you have an iPhone 5s or higher, and you’re running iOS 10 or higher, you won’t be able to utilize any older 32-bit applications that haven’t been updated.

  • The process of uncovering information on Android phones might be more difficult unless you are familiar with the chip that is within the device.
  • There is one software that will tell you this: AnTuTu Benchmark.
  • It will inform you of the Android version and if the device is 32- or 64-bit.
  • In reality, upgrading to x64 does not imply a guarantee of improved performance.
  • At the end of the day, the 64-bit revolution has already begun.
  • Apple Brief/strong> is a weekly email newsletter that delivers the latest news, reviews, tips, and more about Apple.
Apple Fan?

Become a subscriber to ourWeekly Apple Briefand receive the most recent news, reviews, tips, and more sent directly to your email.

This newsletter may include advertisements, special offers, or affiliate connections to third-party websites. By subscribing to a newsletter, you are indicating your acceptance of our Terms of Service and Privacy Policy. You have the option of unsubscribing from the newsletters at any point.

How to know if my computer is 32-bit or 64-bit Windows – Lenovo Support HN

+Lenovo Facts and Figures

  • Information about our company, news, investor relations, sustainability, product compliance, product security, Lenovo Open Source, legal information, and job opportunities.

Shop

  • LaptopsUltrabooks
  • sTablets
  • sDesktopsAll-in-Ones
  • sWorkstations
  • sAccessories Software, servers, storage, networking, laptop deals, and an outlet are all available.

Support

  • Resources for Imaging and Security
  • How-Tos
  • Warranty Lookup
  • Parts Lookup
  • Contact Us
  • Repair Status Check
  • Imaging and Security
  • DriversSoftware

Resources

+Resources

  • The following sections are available: Where to Buy, Shopping Assistance, Sales Order Status, Product Specifications (PSREF), Blogs, Forums, Registration, Product Accessibility, Environmental Information, Gaming Community, LenovoEDU Community, LenovoPRO Community, and LenovoPRO Community

Do I Have 32-Bit or 64-Bit Windows? Here’s How to Tell

Are you running a 64-bit operating system on a CPU that can handle it? If yes, do you have a 64-bit operating system installed? How do you determine if Windows is 32-bit or 64-bit, and how do you know which it is? 64-bit Windows versions, as well as 64-bit CPUs, are more common. While downloading a new game or software, you may notice the option to choose between 64-bit and 32-bit versions. You may also notice this choice while purchasing a new PC or laptop. Isn’t the software the same as it was before?

What’s the Difference Between x86 and x64?

There are several compelling arguments for why 64-bit Windows is superior than its 32-bit predecessor. The two most important factors have to do with computational capability. For starters, a 64-bit processor can perform calculations faster and handle more data at the same time. For the second reason, a 64-bit processor has the capacity to store more memory locations, allowing you to use more memory. Because of this, your system’s overall performance improves, and everyone is a winner in the end.

For a more in-depth discussion, see the section on the difference between 32-bit and 64-bit Windows.

1. Check Your System Information

The first place to look is the System Information section of your computer. When you run the System Information tool, you’ll learn a lot about your computer, including the amount of RAM it has installed, the Windows version you’re running, and whether your system is 32- or 64-bit. Select System by using the Windows Key + X combination. A new window will be shown. System Type may be found under the Device Specifications section. It will inform you if you have a 64-bit CPU if you do. For example, I am running 64-bit Windows 10 Pro on an x64-based CPU and the following is the result: The following are the reasons why it is useful: When you are running a 64-bit operating system, this is the fastest and most straightforward method of determining whether or not you are running a specific CPU model and how much RAM is currently loaded on your computer.

2. Use a Command in Command Prompt

All kinds of secrets and facts about your system will be revealed by using the Command Prompt. In this instance, you may determine if your system is 32- or 64-bit by running a single program. Typecommand Select the Best Match result from your Start Menu search bar, then right-click and selectRun as administrator from the pop-up menu. The following command should be entered once the Command Prompt has been opened: build up a pro Upon execution, the command delivers a list of information about your CPU in real time.

In particular, the PROCESSOR ARCHITECTURE and PROCESSOR IDENTIFIER variables, as well as the existence of theProgramFiles(x86) subdirectory, are important.

The ProgramFiles(x86) folder, on the other hand, reveals that there are two Program Files directories, which indicates that the operating system is a 64-bit one.

The following are the reasons why it is useful: Using the Command Prompt, rather than the operating system, provides you with a quick overview of your processor.

As you can see in the screenshot, the “set pro” command promptly displays information on your processor architectural type, including its identity, level, and revision, as well as other critical details.

3. Program Files

Following right on from the last procedure, merely browsing to the root directory of your primary drive may be sufficient to complete the task. Program Files is the only folder that is available on 32-bit versions of Windows, whereas the two directories that you see above are present on any 64-bit version of the operating system. This folder contains apps that are designed to operate on 32-bit computers and is located in the Program Files (x86) directory. It is under the mainProgram Filesfolder that all 64-bit apps are stored.

While a quick glance at the folders will reveal whether you’re running a 64-bit operating system or not, browsing through your Program Files folder for 32-bit applications is a good way to determine which applications you have installed that might be worth considering for an upgrade to a 64-bit operating system.

4. Check Task Manager Details

The Windows Task Manager contains a wealth of information about your computer’s current state. It may also be used to determine if an application is 32-bit or 64-bit. If you notice that your system is running both 32-bit and 64-bit applications, this indicates that your CPU and operating system are both 64-bit systems. Select Task Manager by pressing the Windows Key + X combination. Change to theDetailstab at this point. Right-click a column name and selectSelect Columns from the context menu.

The Task Manager Details tab now indicates whether your software is 32-bit or 64-bit in nature.

Additionally, by include the Platform tab, you can figure out the program architecture.

5.64bit Checker

If for some reason the preceding four alternatives did not show whether your system is 32- or 64-bit, you have the software option to try. This free Windows utility, developed by Igorware, checks the architecture of your system in a rapid and efficient manner. In addition to providing information on the operating system, the 64bit Checker also provides information about your CPU’s 64-bit compatibility as well as the version of Windows you are now running. You can view an unencrypted version of the information in the Reporttab.

You might be interested:  How To Get Rid Of Viruses On Windows 10

The following are the reasons why it is useful: 64bit Checker provides you with all of the information you want.

You execute the program, examine the table or the text report, and gain an understanding of the intricacies of the situation.

Do I Have 32-Bit or 64-Bit Window?

A decrease in the quantity of new 32-bit systems is continuing. Likewise, manufacturers and developers are seeing the trend. Several well-known Linux distributions are discontinuing their 32-bit versions of their software. Drivers for 32-bit Windows versions were no longer being produced by Nvidia as of 2017. Apple began removing 32-bit applications from the App Store in 2018, and Google has announced intentions to do the same for the Play Store. 32-bit operating systems are becoming obsolete in today’s environment.

Are you still unsure?

Instructions on how to repair a corrupted Windows 10 installation.

Learn how to get Windows 10 back on track after experiencing blue screen of death (BSODs), driver difficulties, or other unexpected problems.

He holds a degree in Contemporary Writing from the University of Exeter, and he has more than a decade of experience as a professional writer under his belt. He likes drinking huge amounts of tea, playing board games, and watching football. Gavin Phillips has more to say.

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

How to check if you’re running 32-bit or 64-bit Windows 10 (and why you should care)

It’s not difficult to determine if you have 32-bit or 64-bit Windows installed on your computer. Although knowing the version of Android you have might be useful when making decisions regarding applications and hardware, you shouldn’t have to worry about it too much when purchasing a new device nowadays. Open the Settings app (use the Win+I keyboard shortcut to go there from whatever you were doing at the time) to see what you currently have installed on your current PC. Click on the “System” category on the left navigation menu and scroll down to the “About” page on the right navigation menu.

  1. The architecture type of your Windows installation, as well as the architecture type of your underlying hardware, will be displayed under “System type.” If you see the words “64-bit operating system,” this indicates that you have 64-bit Windows installed.
  2. If you notice the phrase “x64-based CPU,” this indicates that your device is capable of running 64-bit Windows.
  3. The installation of 64-bit Windows on a computer with a 64-bit CPU and a 32-bit Windows installation may be possible.
  4. Creating a backup is essential, and you should be prepared to reinstall all of your present applications on your new machine.
  5. In certain cases, 64-bit drivers may not be accessible, while in other others, 32-bit bootloaders may be shipped with the device — even though the CPU is 64-bit compatible.
  6. The primary advantage of using a 64-bit operating system is the support for significantly more memory.
  7. Many current applications, such as picture and video editors, require more than 2GB of RAM to function properly.
  8. In addition, 64-bit operation results in more effective memory allocation, which further improves the overall speed of your computer system.
  9. The next time you purchase a new gadget, it will very probably come pre-installed with Windows 64-bit.

Even if you have a PC with less than 4GB of RAM, the efficiency and allocation enhancements brought about by 64-bit Windows ensure that you will still reap some benefits from the upgrade.

Share This Post:

To identify whether your machine is running a 32-bit or a 64-bit edition of Microsoft Windows, follow the steps outlined below. If your machine is running Windows 7 or Vista, you need perform the following steps:

  1. Select StartControl Panel and then do one of the following actions:
  • If the Control Panel is shown in a category view, select System and Maintenance from the drop-down menu. On the following screen, select System
  • If the Control Panel is displayed in Classic View, select System by double-clicking it.
  1. Next to System Type, look for the words 32-bit Operating System or 64-bit Operating System.

If your PC is running Windows XP, perform the following steps:

  1. Select StartControl Panel (or StartSettingsControl Panel) from the Start menu. Choose one of the following options:
  • If the Control Panel is shown in a Category View, select Performance and Maintenance from the drop-down menu. On the following screen, select See Basic Information About Your Computer from the drop-down menu. If the Control Panel is displayed in Classic View, choose System by double-clicking it.
  1. The General tab may be found in the System Properties window
  2. Click it. Windows XP Professionalx64 Edition is the 64-bit version of Windows XP if the text beneath System states that you are operating the 64-bit version of Windows XP. Otherwise, you are using a 32-bit version of the software.

When you select the System option in the Control Panel, you will see some basic information about your computer, including the precise edition of Windows that is currently installed.

4 Ways To Tell If You’re Using 32-Bit Or 64-Bit Windows

Despite the fact that we are gradually moving toward a completely 64-bit computing environment, not everyone is now operating a 64-bit version of Windows. When it comes to installing software, particularly drivers, knowing whether your Windows is 32-bit or 64-bit is critical. Finding out if you’re running 32-bit or 64-bit Windows, on the other hand, isn’t difficult, and there are a variety of methods for doing so. In this post, we’ll look at four of the most straightforward and straightforward methods for determining which version of Windows is currently operating on your computer.

System Information

The system information contained inside Windows is the quickest and most basic method I’ve found for determining if you’re running 32-bit or 64-bit Windows. To find it, hit the Windows + X keys together and then click on System. A newAboutwindow will appear, which will initially display the state of your PC’s protection. The headingDevice Specifications may be found approximately halfway down this page. This is where the information given as yourSystem Typewill clearly tell the version of Windows you are now using on your computer.

Command Prompt

Using the Command Prompt is another quick and easy approach to determine the architecture of your CPU and whether you’re running 32-bit or 64-bit versions of Microsoft Windows. In the search box of your Windows Start Menu, type cmdinto find cm. Command Prompt should be the most appropriate match. You may also right-click on the search result and choose “Run as Administrator” rather to simply opening it like you would usually. Once the Command Prompt window has been opened, type theset procommand into the window.

There are three methods for determining which version of Windows you are running in this situation:

  • PROCESSOR ARCHITECTURE
  • sPROCESSOR IDENTIFIER
  • sProgramFiles(x86)

The processor-specific flags should specify whether you’re running a 32-bit or a 64-bit CPU, depending on your system configuration. If you haven’t changed the hardware on your computer, the existence of theProgramFiles(x86)flag should indicate the version of Windows you’re running on your computer. When using a 64-bit version of Windows, you will only see this message pop up.

Program Files

This straightforward approach is a variation on the Command Prompt method. When it comes to hardware changes after Windows was installed on your computer, the presence of several Program Files directories tells you all you need to know about your system. To begin, open Windows Explorer and browse to yourC:drive. If you’re using a 32-bit version of Windows, you should only be able to view theProgram Filesfolder and nothing else (and all programs inside of it will be 32-bit). TheProgram Filesfolder will include all 64-bit software for 64-bit versions of Windows, whereas theProgram Files (x86)folder will contain all 32-bit applications for 32-bit versions of Windows.

This is the reason why the folders are organized in this manner. Please see Help Desk Geek’s post describing why 64-bit Windows requires two Program Files directories if you’d want to learn more about this topic.

Task Manager

Even while this approach requires a little more work than the others, it does give information that is unique to the programs that are now operating on your computer.

  • To get started, press the Windows + X keys together, then select Task Manager from the menu bar. Another typical shortcut is to hit the keys Ctrl + Alt + Delete at the same time. When the Task Manager window appears, the first thing you should do is double-check that you’re viewing all of the relevant information. If it says Fewer details in the bottom-left corner, you are at the right place. If it says “More details,” click the arrow symbol to the left of this text to open a new window with more information. Change to theDetailstab at this point. By default, the information we require is not displayed in this section. To see it, right-click on any of the column headers (Name, PID, etc.) and selectSelect Columns from the context menu. Using this window, choose the checkbox next toPlatform and then press the OK button.

There will now be a Platform column that indicates the software architecture of each of the processes that are currently running. Based on the following, it should be quite simple to determine which version of Windows you are running: 32-bit versions of Windows will not display any 64-bit apps, however 64-bit versions of Windows will be visible if even a single application is 64-bit. Due to the continued decline in the amount of new systems developed that are based on a 32-bit architecture, the misunderstanding between 32-bit and 64-bit versions of Windows will become less of an issue.

Why it matters whether your Windows is 32-bit or 64-bit

Obviously, Ken like PCWorld, and he writes in to ask about the differences between 32-bit and 64-bit operating systems, among other things. I have to say that this isn’t something I’ve thought about in a long time, but after a quick look online, I discovered that Microsoft’s latest operating system—Windows 10—is available in a 32-bit configuration. Microsoft claims to have at least 71 million 32-bit customers still active (as of 2014), and it didn’t want to abandon them or force them into the clutches of Cupertino’s open arms (headquarters of rival Apple).

First and foremost, if you’re unsure of what operating system you’re running, you can simply find out by right-clicking the Start button in Windows 10 and selectingSystem.

In Windows 7 and 8 (as well as 10) the Control Panel may be accessed by selectingSystem.

Not only does it indicate which OS is being used, but it also indicates whether you are running a 64-bit CPU, which is essential to run 64-bit Windows.

Is it really that important now that you know what you have?

It is worth noting that the most significant difference between 32-bit and 64-bit operating systems is that the 32-bit version can only handle a little less than 4GB of memory for the complete system, which includes the memory on your video card.

Example: If you have a machine with 4GB of RAM but your video card only has 1GB of memory, you will only have 2.5GB of memory available for the operating system to use, which isn’t much at all when it comes to Windows.

Only 64-bit systems are capable of addressing more than 4GB of RAM, which is the primary reason why most users choose one system over the other.

Despite the fact that there are other distinctions, the ability to address specific quantities of RAM is the primary point of concern for the majority of users.

Finally, when it comes to Windows 10, if you’re running a 32-bit operating system (such as Windows 7 or 8) and you make an upgrade, Microsoft will provide you with the 32-bit version of the operating system instead.

When switching from 32-bit to 64-bit mode, you’ll need to complete a clean installation, which will require purchasing a license of Microsoft Windows 10.

Leave a Comment

Your email address will not be published. Required fields are marked *