How Long Does Windows 10 Update Take

Contents

Windows 10 update taking long time

We recommend that you try a lower page number. * Please enter only numbers. * We recommend that you try a lower page number. Please only enter digits in this field. Mr. was the original title. Hello, Peter. Thank you for submitting your question to the Microsoft Community forum. We appreciate your interest in learning more about Windows 10. I’d like to inform you that the length of time it takes to download/upgrade your device is dependent on the age of your device and how it is set. Once the download is complete, it will take around one hour for most devices to upgrade.

For further information, please see the link provided below.

Please do not hesitate to contact us if you require any further assistance with Windows; we would be happy to assist you.

Was this response of assistance?

  • Great!
  • What level of satisfaction do you have with this response?
  • What level of satisfaction do you have with this response?
  • Hello, Peter.

Please see the following link for instructions on how to put your machine into Clean Boot mode: Keep in mind that once you have completed the troubleshooting, you should return the computer to Normal Mode by following the instructions in the section “How to reset the computer to start normally after clean boot troubleshooting” from the same page.

  • Disclaimer: It is critical that you understand the procedures in this section, method, or job because they will explain you how to edit the register.
  • As a result, be certain that you carefully follow these instructions.
  • If an issue develops, you can then restore the registry to its previous state.
  • ( ) 322756 ( ) 322756 ( What is the best way to back up and restore the registry in Windows?
  • Please let us know if you require any more support, and we will be happy to provide it.
  • Sorry if this wasn’t of assistance.
  • Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

Taking over your computer for 30 to 60 minutes at least once a week, generally at an inconvenient time, is a pretty regular occurrence.

I’m baffled as to why Microsoft is unable to handle their software upgrades significantly better.

Additionally, the ability to schedule updates at your leisure is no longer available, so you are forced to accept Microsoft updates at their discretion, which is sometimes unpleasant.

In addition, the update procedure seldom informs the user that an update is currently in process.

Normally, all that is seen is a blue screen with a twiddling ring in the centre of it.

As things are, the user has no way of knowing if their computer will be out of action for 5 minutes, an hour, or longer.

High profit margins appear to be the primary motivator, rather than providing high-quality and timely client care.

Of course, certain upgrades may be required due to the numerous security flaws in Microsoft’s operating system.

Although Microsoft should be able to anticipate many more of these flaws throughout the design process, this has always been a major shortcoming in Microsoft products, as opposed to those from Sun and Apple.

We are unlikely to see any change in the Microsoft operating system after so many years of poor design.

When it is not slowed down by updates, Windows 10 appears to function properly and is far better than Windows XP and Vista, yet it does not represent a significant improvement over Windows 7.

Did you find this reply helpful?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

Trying to get updates for Windows 10 but it keeps failing.

How long do you think it will take?

The following reply was useful to 28 people: Was this response of assistance?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

Despite the fact that my computer has been “Working on Updates” for more than an hour, it is only at 24 percent of its capacity.

Microsoft, I don’t want to come out as rude, but I actually do have a life outside of the company.

Until the person has 48 hours to spend to this, it is not recommended.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

Thank you for submitting your question to the Microsoft Community forum.

I’d like to inform you that the length of time it takes to download/upgrade your device is dependent on the age of your device and how it is set.

While older devices may take longer to upgrade, certain newer, high-performance gadgets may be able to do it more quickly.

I hope you find the material useful.

This is just nonsense.

Microsoft 10 is the worst operating system ever created.

This reply was useful to 72 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

After 2 hours and 33 minutes, this project is just 33% complete.

What is the reason behind this?

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

The problem is most likely caused by the startup things that run when you first turn on your computer.

I hope this has been of assistance.:) 3 people found this response to be helpful.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

To get the Fall Creator’s Update 1709 installed over the previous 1605(?) version, I had on download it to a memory stick using the media creation tool (see), then run the installation from the memory stick with the option to preserve nothing.

It appears that something in the OEM software was interfering with something in the FCU, preventing the FCU from completing its task successfully.

It was certainly less time consuming than the week it took me to realize that this was the only thing that would work.

However, Microsoft will no longer be watching you every time you use your device if you choose to password protect it or leave it blank if you don’t want it to be monitored.

After that, you’ll get a window for configuring your local account.

When I tried to exit the M$ account, Windows informed me that I had typed an erroneous password half a dozen times before allowing me to go.

Did you find this reply to be helpful?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

Thanks.

This response was useful to 1 person.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

What level of satisfaction do you have with this response? Thank you for taking the time to provide comments. You may want to try a lower page number. You may also want to enter only numbers. * You may want to try a lower page number. * You may want to enter only numbers.

Is your Windows 10 update slow? Here’s what to do

As a result, it’s crucial that you install all Windows 10 updates as soon as they become available. These updates contain security patches, exciting new features, and other enhancements, so it’s important to do so as soon as they become available. Unfortunately, if you don’t know how to optimize your downloads, it might take a long time to download all of the essential data.

Why do updates take so long to install?

Due to the fact that Microsoft is continually adding larger files and new features to Windows 10, upgrades might take a long time to finish. The most significant upgrades, which are published twice a year in the spring and fall, can take up to four hours to install – assuming there are no difficulties. When you have a hard disk that is fragmented or almost full, the process will take considerably longer. In addition to the big files and various features contained in Windows 10 updates, the speed of your internet connection can have a considerable impact on the time it takes to complete the installation.

In the case that you continue to encounter poor download speeds even when there are no concurrent downloads, it’s possible that there is an issue with the installation that is keeping it from working properly.

Free up storage space and defragment your hard drive

Windows 10 updates frequently use a large amount of hard drive space, therefore you must prepare space for them in order to expedite the installation process. For example, you should delete obsolete files and uninstall applications that you no longer use. Another thing to do is defragment your hard drive, which is a procedure that arranges how data is stored on your hard drive so that it can generate, open and save files at a quicker rate, among other things. Simply hitting the Windows button and typingDefragment and Optimize Drives can defragment and optimize a disk in no time.

Run Windows Update Troubleshooter

It is possible that this utility will be able to fix any malfunctioning software components that are creating installation issues, as well as reduce download and installation times, if applicable. To access Troubleshoot Settings, just hit the Windows key and type Troubleshoot Settings. The Windows Update option will be displayed in a new window as a result of this action.

Disable startup software

Before you begin your upgrade, you should also turn off any third-party software that might create problems. To do so, hold down the Ctrl, Alt, and Del keys while selecting Task Manager from the menu bar. In the box that appears, select the tab labeled “Startup” from the drop-down menu. When you log into Windows 10, this will display all of the applications that have permission to open themselves automatically.

Use the right-click menu to deactivate any applications that aren’t critical to the update installation process (never disable a Microsoft job) to speed up the update installation process.

Optimize your network

Sometimes all you require is a quicker internet connection. Upgrade to a fiber optic connection or purchase additional bandwidth from your internet service provider if your current connection is inadequate. In addition, using bandwidth control tools can help ensure that sufficient network resources are saved for things such as Windows 10 updates rather than bandwidth hogs such as Skype or YouTube.

Schedule updates for low-traffic periods

Occasionally, it is inevitable to do large-scale upgrades that need lengthy installation timeframes. As a result, instead of scheduling them for installation during the day, plan them for installation after hours when your PCs and workplace network are not in use. Open the Windows Update box and pick the time period during which you would like updates to be installed. If you need assistance with any of the suggestions above, we are always here to assist you. Call us now to schedule a consultation with one of our Windows experts!

Solved: Windows 10 Update Takes Forever

Microsoft publishes update packages on a regular basis in order to repair issues and add new features. While system updates can help to enhance system stability and increase PC performance, the slowness with which the Windows update process operates can be quite irritating. In the event that you’ve been trapped on the update screen for hours and the % figure on the screen isn’t changing at all, it’s likely that the update process has been stalled. And Windows expresses itself as follows: “Getting Windows ready.” You could be perplexed as to what you should do next after being told “don’t switch off your computer.”

You might be interested:  How To Install Windows 10 From Usb

Can I Turn off My PC during Updates?

Yes, you may restart your computer, and in most circumstances, it should be completely safe. To switch off your computer or laptop, hold down the power button for a lengthy period of time. The Windows update process takes time, so give it some space to finish if you can. However, if you’ve been waiting for an hour or more, it’s likely that it’s been stuck and there’s nothing further you can do to fix it. While in the majority of situations, a hard shutdown during the update process did not result in problems, in some circumstances it did.

Unfortunately, that is the only option available if your PC becomes stuck in that location.

After restarting your PC, try these fixes:

It is possible that you may not need to attempt them all. Simply work your way down the list until you discover a solution that meets your requirements.

  1. Run the Windows Update Troubleshooter
  2. Disable third-party starting programs
  3. And reboot your computer. Windows Update service should be restarted. Make more space on your hard disk. Drivers for devices should be updated. Restore the integrity of corrupt system files.

Fix 1: Run the Windows Update Troubleshooter

The Update troubleshooter is a built-in program in Windows that can assist you in resolving typical problems that occur when downloading and installing Windows updates. As a result, if you’re experiencing poor download or installation speeds when installing Windows updates, this program should always be your first port of call. Please follow the steps outlined below: Press the Windows logo key on your keyboard, then click theSettings button to open the Settings menu. 2)SelectUpdateSecurity.

3)SelectTroubleshoot. Then, selectWindows Updateand then clickRun the troubleshooter to begin the process. 4 Follow the on-screen prompts to resolve the issue at hand. Don’t be concerned if the tool did not identify any problems. There are still five more fixes to experiment with.

Fix 2: Disable third-party startups

Some third-party apps may be incompatible with Windows update and cause the process to be halted or interrupted. To determine if this is the source of your problem, take the steps outlined below to stop auto startup on your computer: 1)Press the Ctrl, Shift, and Esc buttons on your keyboard at the same time to bring up the Task Manager window. 2) Select the Startup tab from the drop-down menu. Then, right-click the application that you want to block from starting up on startup and selectDisable from the context menu.

For your own protection, you should maintain your antivirus software running on a regular basis.

Fix 3: Restart the Windows Update service

Incorrect operation of the Windows Update service may result in the occurrence of errors. To check if that helps, try restarting the Windows Update service and seeing if it helps:

  1. To enter the Run dialog box, hit the Windows logo key and the R key on your keyboard at the same time. To access the Run box, hit the Windows logo key and the R key at the same time on your keyboard. Enter the command services.msc into your browser’s address bar and press the Enter key on your keyboard. Type services.msc into your browser and hit the Enter key on your keyboard
  2. Right-click Windows Update and select Restart from the context menu. Right-click the Windows Update and select Restart from the context menu. Restart your computer to see if the problem persists. Restart your computer to see if the problem persists.

If your problem continues, proceed to the next step in the process.

Fix 4: Free up your hard drive space

Windows updates have the potential to use a significant amount of storage space. If your computer’s hard drive is running low on space, you may have problems while trying to install Windows updates. Freeing up hard disk space is quite likely the solution to your problem in this instance. Here are some suggestions for freeing up space on your hard disk in order to create place for the update files:

  • Uninstall any programs that are no longer needed
  • Use the Disk Cleanup tool to free up disk space. Defragment your computer’s hard disk.

Uninstall unnecessary programs

1) On your keyboard, hit the Windows logokey and the control key simultaneously. Then select Control Panel from the drop-down menu. 2) Select Uninstall an application from the drop-down menu. 3)Right-click the software that you no longer use and pick Uninstall from the context menu. Only those programs should be removed from your computer that you no longer use; do not remove any apps that you are not familiar with. It is possible that it is important to the operation of your machine. If you have a large number of unneeded apps on your computer, this might help you clear up a lot of space.

Free up your space with the Disk Cleanup tool

To do a disk cleanup, start by pressing the Windows logo key and typing disk cleanup. Then choose Disk Cleanup from the drop-down menu. 2)Check the boxes to the left of the file types you want to remove from your computer. Then press the OK button. The removal of temporary and useless files can help you free up hard disk space, allowing your computer to run more efficiently and update more frequently.

Defragment your hard drive

1) On your keyboard, hit the Windows logo key followed by the word defragment to begin. Then select Defragment and Optimize Drives from the drop-down menu. 2)After you have clicked Optimize, you must wait for the procedure to be completed.

Fix 5: Update your device drivers

Hardware drivers that are out of current or that are malfunctioning might also cause PC problems. It is critical that you have the most up-to-date and right drivers installed on your computer at all times in order to keep it functioning smoothly. It is possible to obtain the correct drivers for your hardware in two ways: manually or automatically. Manual driver update– You can manually update drivers by visiting the manufacturer’s website for each of your devices and looking for the most recent version of the right driver.

  1. The Driver Easy program can update your drivers for you automatically if you don’t have the necessary time, patience, or computer expertise to do it manually.
  2. Start Driver Easy and hit theScan Now button to begin scanning your computer.
  3. Click the Update button next to the driver you wish to update to have it automatically download and install the latest version of the driver.
  4. Alternative: Click Update All to automatically download and install the right version of all the drivers that are missing or outdated on your system (this needs thePro version; you will be requested to upgrade after clicking Update All).

While it is possible to do it for free, it is primarily manual. Driver Easy’s support staff may be reached [email protected] if you have any questions or need assistance.

Fix 6: Repair corrupted system files

It’s possible that corrupted or damaged system files are also to blame for your computer’s inability to update quickly. Follow the steps outlined below to determine how to resolve the problem:

  • Reimage can be used to repair damaged system files. Start the System File Checker and see what happens. Start the DISM command-line utility.

Repair corrupted system files with Reimage

Reimage is a company that specializes in Windows repair. Then examines your system files to see if any are corrupted or missing, and it replaces any corrupted or missing system files on the fly. It’s similar to performing a clean Windows reinstallation in an hour, and you won’t lose any apps, settings, or user data in the process! 1) Download and install the Reimage software. 2) Launch Reimage and do a free scan of your computer. 3) Wait for Reimage to complete its scan of your computer. It may take a few minutes to complete this process.

To resolve any issues, you must purchase the full edition, which includes a 60-day Money-Back Guarantee if you are not satisfied.

Run the System File Checker

1) On your keyboard, simultaneously hit the Windows logokey and theRat key. Then, while holding down the Ctrl, Shift, and Enter keys at the same time, Command Prompt will be launched as an administrator. Then, using the Enter key on your keyboard, type sfc.exe /scannow and hit Enter. It is possible that this process will take some time. Please be patient till it is completed. Use the DISM tool to update your system files and repair any errors that may have occurred when running the System File Checker.

Run the DISM command tool

1) On your keyboard, simultaneously hit the Windows logokey and theRat key. Then, while holding down the Ctrl, Shift, and Enter keys at the same time, Command Prompt will be launched as an administrator. Then, using your keyboard, typedism.exe /online /cleanup-image /startcomponentcleanup, and then hit the Enter key to finish. 4)Typedism.exe /online /cleanup-image /restorehealth, and then hit the Enter key on your keyboard to complete the process. It might take several minutes to complete this task.

5)Now, run a Windows update to determine if the problem has been resolved.

if you have any recommendations or questions, please do not hesitate to post a comment below!

How Long Does It Take to Download/Install/Update Windows 10?

What is the average time it takes to install Windows 10? An enormous number of individuals are searching for a solution to this issue on the Internet. If you have any questions concerning this subject, you have come to the correct spot since MiniTool Solutionwill provide you with a full response after doing an analysis. Some related material will be discussed at the same time. When referring to “how long does it take for Windows 10 to install,” you may choose to consider the issue and discover that it has several interpretations.

A clean install of Windows 10, an upgrade of the system, or a system reset are all operations that require the installation of Windows 10. As a result, we shall divide this subject into three sections:

  1. In how long does it take to completely reinstall Windows 10 on a computer? How long does it take for Windows 10 to be updated? How long does it take for Windows 10 to be installed after a factory reset?

Part 1: How Long Does Windows 10 Take to Install from Scratch?

To install Windows 10 from the ground up, you must first download an ISO image of the operating system from the Internet and then run the installation program to complete the process. As a result, this section will demonstrate two points.

How Long Does It Take to Download Windows 10?

Both the speed of the Internet connection and the size of the downloaded file influence the length of time it takes to download a file. In order to obtain a Windows 10 ISO file, you often utilize theMedia Creation Tool available on Microsoft’s website. This download is rather quick. It will take around 1-2 minutes for Windows 10 Setup to complete its preparations after you have launched this utility. To install Windows 10 on another computer, you’ll need to prepare installation media (such as a USB flash drive, DVD, or ISO file).

If you pick an ISO file, you will have to burn it to a DVD afterwards, which will add to the overall time required.

(It takes me around 30 minutes to download the ISO file to my USB drive in my instance.

Input your Internet speed and the size of the ISO file into the Download Time Calculator to get an estimate of how long it will take to download the file.

How Long Does It Take to Do a Clean Install of Windows 10

Installing the Windows 10 operating system on your computer is the next step once you have completed the download process. What is the average time it takes to install Windows 10? You couldn’t tell me what time it was. Some customers have reported that a clean install of Windows 10 without any complications can take roughly 20-30 minutes, while others have reported that the installation of Windows 10 takes approximately 1 hour. Simply said, the amount of time it takes to install Windows 10 is dependent on the hardware in your computer, such as the processor and disk speed.

If you are using an older computer, it may take longer to complete the task due to a sluggish or damaged hard disk.

Listed below is an answer from a forum member:

Part 2: How Long Does It Take to Upgrade to Windows 10?

Windows update, on the other hand, is a very different scenario. If you are upgrading your computer from Windows 8/7/XP/Vista to Windows 10, you have the option of downloading the ISO file and doing a clean install of Windows 10. Simply reading the section above will provide you with a wealth of information. Do you wish to switch from Windows Vista to Windows 10 because you believe it is out of date? What is the procedure for performing a Windows Vista upgrade? This page will bring you through the process step by step.

  • Because Windows will have to back up current data, move files around, and do other tasks, this may take longer than a clean installation.
  • In the majority of circumstances, you can check for updates using the Settings menu.
  • All you have to do is do a simple action, such as restarting your computer.
  • The typical updates, such as KB, will not take much time.
  • If you are using an earlier version, it may take many hours or even all day to complete the installation since it upgrades Windows throughout the process and may have to load a large number of cumulative updates.
  • When updating to Windows 10, some of you may have a major difficulty, with the Windows 10 update taking hours or even days to complete.

It is conceivable that there is a problem with your computer’s operating system. To resolve this issue, please see our prior post – Is Your Windows Update Taking An Inordinate Amount of Time? Get Methods Right Away.

Part 3: How Long Does It Take to Install Windows 10 after Reset?

If something goes wrong with your computer, you may opt to reset it in order to address some system problems if some of the remedies don’t work. Resetting your computer allows you to preserve your personal files or delete them, and then it reinstalls Windows. “How long does it take to install Windows 10 after a factory reset?” you might wonder. Actually, the speed of your hard drive has an impact on this. According to some customers, resetting a PC on an SSD takes 30 minutes, but it takes several hours (2 hours, 3 hours, 4 hours, or a lengthy period) on an HDD.

  • Even some claim that performing a clean install is more expedient.
  • To resolve this issue, go to the following post: -3 Ways to Fix Windows 10 Reset Stuck at 1/66/99 Percent Black Screen (with Solutions).
  • To summarize, the Internet download speed and the file size are the two factors that influence the time it takes for Windows 10 to download.
  • Please share this post on Twitter in order to inform as many people as possible about the solution to the question “how long does Windows 10 take to install?” It is a really useful document.
  • Now that you’ve determined the best time to install Windows 10, it’s time to get started.
You might be interested:  How To Set Default Printer In Windows 10

Windows 10 Clean Install

You will have all of your personal files destroyed during the installation procedure. As a result, we highly advise you to back up all of your crucial data before performing the clean install. Fortunately, MiniTool ShadowMaker, a piece of professional PC backup software, might be of great assistance in this endeavor. Initiated and developed by MiniTool, it is capable of backing up files and folders, as well as the Windows operating system, drives, and partitions. It also has the ability to sync files and folders between computers for backup purposes, as well as to clone a hard drive to another hard drive for disk upgrading.

  1. Download it for free.
  2. Step 2: Navigate to the Sourcesection and choose the files that you want to back up.
  3. We’ll use the external hard drive G as an example in this section.
  4. Then, under theManagepage, this program begins to run the backup process that was previously set up.
  5. Simply follow the steps outlined below to complete this task: 1.
  6. 2.
  7. Make use of it to generate a bootable USB flash drive for your computer.

3.

4.

5.

6.

7.

8.

9.

Typically, unallocated space on Drive 0 is selected, which is obtained by removing the original OS partition. Windows Setup is in the process of installing Windows 10. After that, you’ll need to change certain system settings and restore files from the backup you just generated.

Update Windows 10

Following your education on “how long does the Windows 10 upgrade take,” you may like to put your knowledge into action. How do you go about upgrading your computer to Windows 10? As previously stated, if you need to upgrade from an older version of Windows to Windows 10, you must do a clean install using the ISO file for Windows Vista/XP/7/8, which is available through Microsoft. In order to do an in-place upgrade, the Media Creation Tool must be used. Simply download and execute this program.

In addition, you may go to StartSettingsUpdateSecurity to access the Windows Update page by selecting that option.

You’ll need to restart your computer to complete the Windows 10 update installation if it finds any.

Reset This PC

You may have come across the question “how long does it take to install Windows 10 after a reset” and discovered the answer. Then, by following the instruction below, you may begin the process of resetting your computer. 1. Navigate to StartSettingsRecovery and click on it. Get started by going to theReset this PCsection of the website. 2. Select either “Keep my files” or “Remove everything.” 3. Complete all of the processes by following the on-screen directions. For more information, see this post: Windows 10 Reset vs.

Fresh Start: The Differences and Advantages Here It’s possible that this is what you’re looking for because it provides extensive information on the two alternatives of PC resetting and clean installation.

We recommend that you create a backup of your Windows operating system in advance to avoid getting into difficulty.

How to Create a System Image with MiniTool ShadowMaker is covered in detail in this post -Use the Best Ghost Image Software to Ghost Windows 10/8/7-.

Bottom Line

If you’re seeking for an answer to the topic of how long does it take for Windows 10 to install, this page will be quite helpful to you in your search. It is divided into three sections: installing Windows 10 from the beginning, updating Windows, and installing Windows 10 after resetting the computer.

Simply said, action is required! Assuming you have any queries or concerns when using the MiniTool program, please let us know by leaving a comment below or getting in touch with us via the contact page.

How Long Does It Take to Install Windows 10 FAQ

How long does it take to upgrade from Windows 7 to Windows 10? Installing the latest version of Windows 10 on a contemporary PC with solid-state storage may take between 10 and 20 minutes. On a standard hard disk, the installation process may take longer to complete. What is the time frame for upgrading from Windows 7 to Windows 10? The amount of time it takes is depending by the speed of your Internet connection as well as the speed of your PC (disk, memory, CPU speed and the data set). The actual installation process can take anything from 45 minutes to an hour, although it can sometimes take longer than an hour.

Windows 7 will be supported until January 14, 2020, but we do not suggest that you continue to use it beyond that date since Microsoft will no longer provide security updates and technical support, leaving your computer exposed to virus and malware assaults.

Following the upgrade from Windows 7 to Windows 10, you will be required to purchase a Windows 10 license key.

How to Fix a PC Stuck on “Don’t Turn Off” During Windows Updates

If you switch off your computer while Windows is updating, you will see the warning “Getting Windows ready, don’t turn off your computer.” If you allow Windows enough time, it will usually complete the installation process; however, if it has been many hours, you may only need to restart your computer. Unfortunately, it is usual to have to wait for Windows to update, which results in a significant amount of time being wasted. According to Microsoft, there are over 700 million Windows 10 devices in use, and the April 2018 Update will take between 10 and 30 minutes to install.

What Happens If You Restart Your PC?

If you restart your computer while the update installation procedure is in progress, the update will not be installed. But how catastrophically will it fail? Is it likely to cause difficulties with your computer system? We conducted a number of experiments to determine exactly what happened. First, we instructed Windows to download and install a regular update from the Windows Update website. We had to restart our computer since the “Getting Windows ready” message was flashing on the screen. The warning “Please do not switch off your computer” came on the screen.

After logging in, Windows presented a message stating that “We were unable to complete the installation of updates.” Despite the fact that the update installation had failed, Windows was still operational.

Secondly, we rebooted our PC while the screen displayed the message “Working on updates, 27 percent complete, don’t shut down your computer.” Windows resumed normally, and we were greeted with a warning that said, “We were unable to complete the updates, undoing modifications, please do not switch your computer off.” After the procedure was completed, Windows booted normally and everything functioned as it was supposed to.

  1. We also put this approach through its paces when installing a significant Windows 10 update, such as the Fall Creators Update to the April 2018 Update.
  2. A simple “Please wait” notice flashed on the screen once the machine rebooted, and then the sign-in screen displayed as expected.
  3. Finally, when it read “Working on updates 48 percent, don’t switch off your computer,” we attempted to restart the computer.
  4. It was never an issue in any of the tests when the computer was turned off.

Windows has simply opted to cease updating and to roll back any files that have been changed in the meantime. The update is re-downloaded by Windows before it can be re-installed, in case there was a problem with the initial download. Following that, the updates were installed in the usual manner.

How Long Should You Wait?

If you see this notice on your screen, be patient and give Windows some time to complete the installation of the updates. This procedure might take a long time to finish, depending on how large of an update Windows has to install and how sluggish your machine and its internal storage are at the time of installation. It is not uncommon for this warning to remain on your screen for up to five minutes after it has been displayed. If this notice has been shown on your screen for an extended period of time, you may need to restart your computer.

Because it is a large update, and your hard disk is sluggish and full, it is possible that Windows may simply want more time to complete the procedure.

If the percentage appears to be stuck on a specific figure for an extended period of time, it is possible that the update process has been stalled.

Yes, You Should Turn Off Your Computer If It Gets Stuck Here

As we’ve demonstrated above, rebooting your computer should be risk-free. As soon as you restart your computer, Windows will stop attempting to install the update, reverse any modifications made, and bring you back to the sign-in screen. Windows will attempt to reinstall the update at a later time, with the expectation that it will be successful the second time. Although it shouldn’t be necessary, Windows occasionally contains flaws that require you to restart your computer in order to resolve them.

  1. To switch off your computer at this screen, whether it’s a desktop, laptop, or tablet, simply hold down the power button for a lengthy period of time.
  2. This causes the computer to shut down completely.
  3. Although doing a hard shutdown is never recommended, it may be the only alternative available in this situation.
  4. Alternatively, if the update process is genuinely frozen, the only option available is to force the computer to shut down completely.
  5. IN CONNECTION WITH: What Is the Most Effective Method of Backing Up My Computer?

How to Repair Windows If It’s Not Working Properly

The problem should be resolved by just restarting your computer. However, if your computer still fails to boot up correctly, you may be experiencing another system problem. It is possible that restarting your computer did not solve the problem; instead, your machine may have become stopped at the “Getting Windows ready” prompt because the Windows operating system has previously encountered an error. When Windows fails to start properly, you may use the Startup Repair program to fix it. In the event that Windows fails to boot successfully, an advanced boot options menu is expected to show.

If you get an advanced boot options menu, select Repair Startup from the menu.

It is possible that you may need to utilize the “Reset this PC” tool or even reinstall Windows in order to acquire a fresh, fully functional operating system if even Startup Repair does not solve your problem.

You can also attempt restoring your operating system to a previously known-good condition by using System Restore on your computer.

IN CONNECTION WITH: How to Use the Windows Startup Repair Tool to Troubleshoot Startup Issues hawaya/Shutterstock.com is the photographer responsible for this image.

How to Fix Windows Updates Taking Forever to Install

Every month, Microsoft delivers a large number of Windows updates to repair bugs and bring new features to the operating system. Although these Windows updates are quite beneficial in keeping the system up to date, they may also be a source of frustration. The installation of some of these Windows updates, particularly on Windows 10, may take an extremely long time to finish. Several factors, like the age of your computer and the speed of your internet connection, influence how long it takes for an update to complete successfully.

  1. Even after 24 hours, it may appear that the update has stalled at 90 percent or 80 percent completion.
  2. Because the computer may begin upgrading itself, it will be a major inconvenience because you will have to wait for a significant amount of time merely to receive an update.
  3. It has already been noted that some people receive the update rather fast, but others may wait for up to 24 hours or even longer in order to receive the update.
  4. This is the amount of time necessary for the vast majority of these updates, and there isn’t much you can do to shorten this period in any way.
  5. In a small number of circumstances, the update may become stuck or stopped as a result of an antivirus or other application that is in conflict with the update.
  6. It is possible that the update will fail to install in some instances.

Tip

Make sure you have adequate space on your hard drive to accommodate the update’s installation. If there isn’t enough room for the Windows update to be installed, it may become stuck at a specific percentage of the installation process.

Method 1: Restart the Computer

Prior to following the directions in this approach, bear in mind that it is possible for things to go wrong. Some customers said that rebooting the computer resolved the Windows update stopped issue, while others reported that the computer went back to its former condition. As a result, if you have waited more than 20 hours for the update to complete and it appears to be stuck, you should reboot the device at your own risk. It is possible that you will lose all of your progress. It’s possible that you’ll have to restart the update and go through the 20+ hour wait process all over again.

However, if you are prepared to take the risk or if you are certain that the update has been stuck, i.e. you have been seeing the loading indicator for 4-5 hours, then rebooting is recommended. The installation will be completed without any problems after the machine has been restarted.

Method 2: Hard Reboot

If you suspect that the update is truly stuck and you want to try something else, you can do a hard reset on your computer. Repeating the Windows Update procedure after you have conducted a complete hard reboot might result in success. You might be hesitant about this procedure because Windows expressly instructs you not to restart the computer and instead to wait for the Windows to upgrade to the most recent version. However, if the Windows operating system is truly stuck or jammed at this point, there is nothing else you can do but restart the computer.

You might be interested:  How To Get Windows 10

You can wait another hour or two to receive a confirmation.

You will have to restart the Windows update process, and you will have to wait for many hours once again to complete it.

The following are the actions to take in order to do a hard reboot.

  1. Keep pressing and holding the power button until your computer shuts off. Alternatively, you may do this from the Windows update screen (where the update has been stuck). 45 seconds should be allowed to pass. Disconnect the power cord from the wall outlet. If you have a laptop, you should also remove the batteries from it. For at least 15 seconds, press and hold the power button on your device. 5 minutes should be allowed. Replacing the battery in the laptop and connecting the power source, if you are using a desktop PC To begin, turn on your computer.

Test whether or not the Windows update is successful after logging in to check whether it works. Note: After you have completed the reboot, you may be presented with the Advanced Boot Options screen rather than the normal log in screen. There are various instances in which you may be presented with the Startup Settings screen. If you get one of these displays, just boot your computer into Safe Mode with Networking and attempt to update Windows once more.

Method 3: Windows Update in Clean Boot

Please keep in mind that if you follow the instructions outlined below, you will lose all of your update progress. You will have to restart the Windows update process, and you will have to wait for many hours once again to complete it. So, if you are ready to wait or if you are certain that your Windows update is blocked, use this method. It is possible that the problem is caused by a conflict with another application or software, in which case restarting your computer in aClean Boot condition will resolve the problem.

  1. Hold down the power button until your computer has completely shut down. To restart your computer, press the power button one more. Once you’ve successfully signed into Windows, you may go to the next step. Hold down the Windows key and hit R
  2. Typemsconfigand hit the Enter key
  1. Select the item from the Servicestab by clicking on it. Remove all Microsoft services from view by clicking on the buttonDisable All
  1. To begin, ensure that the Startuptab is chosen. Disable the first service in the list by selecting it and clicking Disable
  1. Step 11 should be repeated for each item in the list. Once you’ve finished, close the Task Manager. Reboot after clickingApply and selectingOk.

Once the machine has been rebooted, run Windows Update again.

Method 4: Reset Windows Update Components

Please keep in mind that if you follow the instructions outlined below, you will lose all of your update progress. You will have to restart the Windows update process, and you will have to wait for many hours once again to complete it. So, if you are ready to wait or if you are certain that your Windows update is blocked, use this method. If nothing else seems to be working, consider manually resetting the Windows Update Components and attempting to install the Windows Update once again. The following are the procedures to take in order to reset the Windows Update Components.

  1. Hold down the power button until your computer has completely shut down. To restart your computer, press the power button one more. Once you have successfully signed in to Windows, hit the Windows key once again. Start by typing cmdin theStart Search
  2. To launch the command prompt as an administrator, right-click it in the search results and choose “Run as administrator.”
  1. Enter the following commands: net stop wuauserv net stop cryptSvcnet stop bits net stop msiservernet stop bits net stop msiserver
  1. Enter the following command into the text box and hit “Enter.” ren C: ren C: Computer: WindowsSoftwareDistribution SoftwareDistribution.old
  2. Type the following command and hit the “Enter” key. ren C: ren C: Catroot2.old in WindowsSystem32catroot2
  3. Typenet start wuauserv net start cryptSvc net start bits net start msiserver

Close the command prompt and restart your computer. Once the machine has been successfully restarted, retry the Windows update. Keep in mind that you must navigate to the following URL in order to download and run the executable that corresponds to your unique Windows version and architecture. In addition to being a proactive and self-motivated information technology specialist, Kevin also possesses extensive understanding of all areas of network infrastructure design, implementation, and management.

Exceptional track record of completing many large-scale mission-critical projects on schedule and on budget in a timely manner.

Annual Windows 10 Update // Marquette University

Annual Windows 10 Operating System (OS) security and feature upgrades will be performed in addition to the monthly updates now being performed. After the deadline of Monday, January 25, 2021, you will be obliged to update your Windows 10 operating system. To avoid the automatic update that will be published at 1 a.m. Central time on Friday, January 8, 2021, we encourage that you take advantage of this chance to upgrade at your convenience while you still have time. Windows 10 operating system (OS) significant security and feature updates are released on a yearly or semi-annual basis by Microsoft for the Windows 10 operating system (OS).

Not to be confused with the monthly Windows updates that you already receive for bug fixes and security upgrades, which are separate from the yearly releases.

It is critical to provide professors and staff with the flexibility to complete this task when it is most convenient for them because these annual upgrades can take anywhere between 30 minutes and two hours (depending on your internet connection speed) and may necessitate several computer restarts.

What to expect

  • Be prepared for the update to take anything from 30 minutes to two hours. It is normal to expect numerous computer restarts (usually two to three restarts, but maybe more)

Instructions

Please keep in mind that this update can be completed from off-campus. It is recommended that this update is carried out from campus using a wired connection in order to provide the best possible experience. It is suggested as a best practice to make a backup of your data before doing an update to avoid data loss. Check your OneDrive backups by following the instructions for accessing OneDrive for Business using a web browser.

Update at your convenience

It is scheduled to take place between Thursday, December 10, 2020, and Thursday, January 7, 2021.

Automatic update

The time period begins on Friday, January 8, 2021, after 1 a.m. Central time. On a rolling basis, all Marquette-owned and ITS-managed Windows machines (running a version of Windows less than 1909) will be updated automatically. There are no manual procedures required, and the update may commence at any moment while the computer is still switched on.

Frequently Asked Questions

All of the information| All should be collapsed. This is interfering with my ability to do my task. What is the purpose of updating my computer? The ability to upgrade your computer on your own schedule allows you to do it when it is most convenient for you, avoiding surprises and causing less disruption. The most common reason for Windows upgrades is for security reasons. Due to the possibility that they may be exploited by virus or hackers, security concerns are the most dangerous of all. Frequently discovered security issues in the system are addressed by Microsoft developers, who work to build a patch for the security holes that have been discovered.

  1. Is there anything I need to do, or is the procedure completely automated?
  2. The update will be made accessible to you for manual installation from Thursday, December 10, 2020, through Thursday, January 7, 2021.
  3. This will allow you to upgrade your system whenever it is convenient for you.
  4. What will happen if I do not upgrade my computer before the deadline of January 8, 2021?
  5. Why do we have to repeat this process year after year?
  6. The greater the amount of time a computer falls behind on updates, the longer it will take to bring it up to date in the future.
  7. According to Microsoft, feature upgrades are what they refer to as important releases in their yearly updates.

They are often considered inconsequential.

Did the process come to a halt?

Continue without interrupting and call the IT Services Help Desk for assistance.

According to Microsoft’s current calendar, this will be an annual event.

Was there anything you could say regarding the Windows machines in my computer lab?

After Thursday, January 7, 2021, all shared computers in the lab, classroom, and other areas will be automatically upgraded.

What about the computers in my laboratory for research? What method will be used to update these? After Thursday, January 7, 2021, all shared computers in the lab, classroom, and other areas will be automatically upgraded. Is this an update that my PC requires?

  • It is only necessary to install this update if your computer is not currently running version 1909 or higher
  • Mac machines will not be required to install this update. Because Microsoft has discontinued support for Windows 7 and Windows 8.1, the operating system updates are only relevant to devices running the Windows 10 operating system. In the event that your computer is still running one of these operating systems, it is no longer receiving security updates from Microsoft and is thus vulnerable to hack and cyber attack. Please contact the IT Services Help Desk for assistance with the following steps.

What is the best way to find out what version of Windows 10 I am running? In what time frame can I expect the 1909 update for my machine to become available? On Thursday, December 10, at 1 a.m. Central, the update will be made accessible in Software Center to all students, faculty, and staff on a rolling basis across the campus. Please refer to the guidelines for upgrading at your leisure. Is it necessary for me to be connected to the Marquette VPN in order to receive this update?

  • No, this is not the case in most cases. All that is necessary is an internet connection. It is possible that a Marquette VPN will be required for troubleshooting
  • A reliable internet connection is advised. This update should be performed from the college network using a wired connection for the best experience.

What should I do if I do not see the update available in Software Center despite the fact that my PC matches the prerequisites to get the update?

  • Check to see if you are connected to the internet, whether through your home network/wireless connection or the campus network. The internet connection should be maintained for at least two to four hours in order for your machine to have enough time to check-in and get the update package.

If my computer has been connected to the internet via my home network for two to four hours and I still do not see the option to update, what should I do in this situation?

  • If my computer has been connected to the internet via my home network for two to four hours and I still do not see the option to update, what should I do in this case?

Please keep in mind that this does not apply to computers that are linked to the campus network.

  • If you are still unable to locate the option to upgrade your computer in the Software Center, please contact the IT Services Help Desk for more assistance. For troubleshooting purposes, please have the name of your machine or its serial number handy. These can be located on the asset tag or sticker that came with your machine. The IT Services Help Desk can also assist you in finding the name or serial number of your machine
  • And

What should I do if I receive a problem when attempting to install the 1909 update through Software Center?

  • Please restart your computer, log back into your account, and wait 30 minutes before attempting the update once more. If you continue to receive an error message after the second try, please contact the IT Services Help Desk for more guidance. If you are off-campus, you might also try connecting to the Marquette VPN and re-running the update through the Software Center.

How long do you think it will take to complete the 1909 update?

  • The length of time is determined by the speed of your network connection. The update will take around one hour on average (depending on the quantity of data on the computer and the speed of the internet connection), but it may take anywhere between 30 minutes and two hours

In what way will I be notified when the update has been properly completed?

  • Once the process is complete, your computer will return to the login screen. It is also possible that your computer will reboot several times. Typically, it is between two and three, but it might be more.

Will any of my data be lost as a result of this update?

  • There will be no loss of stored data since the upgrade includes failsafe safeguards that prevent any hard disk data from being lost. Before you restart your computer, save your work and shut any open programs. The machine will roll back to its previous Windows 10 version if the upgrade cannot be completed properly
  • Otherwise, it will restart.

Questions?

If you have any issues concerning the yearly Windows update, please contact the IT Services Help Desk.

Leave a Comment

Your email address will not be published. Required fields are marked *