How To Access Boot Menu Windows 10

Contents

How to Access Windows 10 Boot Options Menu (6 Ways)

Windows 10 has a plethora of intriguing features, and one of them is the advanced boot options, which may be used to fix many of the Windows 10 difficulties. The following options are available: you may reset your computer, restore it to a previous state, boot to a different operating system, utilize “Startup Repair” to address startup difficulties, and boot into safe mode to troubleshoot issues with Windows 10. Also see: 25 Ways to Make Windows 10 Run Faster. While there are many various methods to access Windows 10 boot choices, each has its own set of requirements.

Look over these ideas for a moment.

If you can access Desktop

You can access Windows 10 boot options if Windows is operating normally and you can access the desktop. If Windows is operating normally and you can reach the desktop, you may use the techniques listed below to access Windows 10 boot settings.

I – Hold the Shift key and restart

This is the quickest and most convenient method of accessing Windows 10 boot settings.

  1. All you have to do is restart your computer while holding down the Shift key on your keyboard. Open the Start menu and select “Power” from the drop-down menu to access power choices. Now press and hold the Shift key while clicking on the “Restart” button
  2. After a little time, Windows will automatically begin booting into advanced boot settings.

This method may be used from any location, whether you choose “Restart” from the start menu, the “Shutdown”dialog, or the start screen. All you have to do is make sure you’re holding down the Shift key while doing so. However, it should be noted that this strategy is incompatible with the virtual keyboard. If your real keyboard is not functioning properly, this approach will not function properly as well.

II – Access Windows 10 boot options from Windows settings

Don’t be concerned if you are unable to use theShift+Restartoption. You may also access the advanced starting options in Windows 10 from the settings menu.

  1. Start by selecting “Settings” from the Start menu and then clicking on “UpdateSecurity” at the bottom of the window
  2. From here, select the”Recovery”option and then click on”Restart now”under the”Advanced startup”option. Your computer will now restart into advanced boot choices
  3. This is a good thing.
III – Use Command Prompt to access Windows 10 boot options

To access the advanced boot settings, you may also use a fast Command Prompt command to go to the Command Prompt window.

  1. Command Prompt (Admin) may be accessed by right-clicking on the Windows 10 Start menu and selecting “Command Prompt (Admin)” from the menu. Type shutdown.exe /r /o in the Command Prompt window and press the “Enter” key

A message will appear stating that you are being signed out; simply close the message and Windows 10 will reboot to the boot choices. However, unlike the techniques described above, when Windows is restarted instantly, there will be a slight wait before Windows is restarted.

And if can’t access Desktop

You can use the following techniques to access Windows 10 boot options and resolve the problem if you are unable to reach the desktop and the computer keeps crashing or restarting.

I – Force Windows to start in advanced boot options

If Windows fails to start up properly, it is configured by default to restart in advanced boot options. Your computer may automatically launch the boot options when it detects a starting problem that is causing your Windows computer to crash. However, it is not required, and Windows may become stuck in the boot cycle if this is not done. It is possible to force Windows to crash and open the boot choices in this case. In order to do this,

  1. As soon as you see the Windows logo, press and hold the power button for several seconds to force the computer to shut down. You may also pull the power supply (or battery) to force the computer to shut down. Repeat this process 2-4 times, and Windows will provide you with boot alternatives

It took two attempts for me to be able to access the boot choices; however, your results may vary.

II – Use Windows 10 recovery drive

A Windows recovery drive may be used to troubleshoot a variety of Windows problems, including those that prevent Windows from starting. If a force shutdown does not assist you in gaining access to boot choices, then this will most likely work for you.

In the event that you haven’t previously done so, you may quickly generate a recovery driver for your computer right now. To get started, all you need is a USB stick and a computer running Windows 10.

  1. You can use any Windows 10 PC, whether it’s yours or a friend’s
  2. There is no need to worry about license issues. In order to establish a recovery disk, follow the steps supplied by Microsoft. As soon as you have attached the recovery disk to your damaged PC, restart it from this disc. After that, you will be prompted to select a keyboard layout. Select the relevant one (usually the United States) and the boot choices will be shown
III – Use Windows 10 installation drive/disc

A Windows 10 installation disk or disc may also be used to view the boot options in Windows 10. If you installed Windows 10 via a USB drive or a disc, you will need to restart your computer.

  1. To access the Windows 10 boot options, you may boot from the USB/disc and select the “Repair” option from the boot menu. The recovery disk can also be created on another Windows 10 PC if you don’t have access to another Windows 10 computer. You can use any other PC to download the Windows installer and utilize it to create an installation drive
  2. However, this is not recommended.

Exit Windows 10 boot options

The choices listed above should be sufficient for gaining access to Windows 10 boot options and allowing you to diagnose whatever the problem is. When you are finished, click on the “Continue”button to dismiss boot settings and open Windows 10 from the desktop. If you have more than one operating system installed, the default operating system will be the one that is launched. In such scenario, click “Launch Another Operating System” from the drop-down menu and then select Windows 10 to begin using it right away.

To summerize

Holding down the Shift key when restarting the computer is unquestionably the quickest way to get the Windows 10 boot choices. If, on the other hand, Windows is playing up and you are unable to boot correctly, a recovery or installation disc will be of great assistance. If you are aware of any additional methods for gaining access to Windows 10 advanced boot options, please share them with us in the comments section. Also see: Bash on Ubuntu on Windows 10 – Take Advantage of Linux Feature in Windows

Advanced startup options (including safe mode)

The Advanced Boot Options screen allows you to start Windows in advanced troubleshooting mode by selecting the Advanced Troubleshooting option. By turning on your computer and hitting the F8 key just before Windows starts, you can go inside the menu. Some choices, such as safe mode, allow you to start Windows in a constrained state, where just the minimal necessary are loaded and executed. If an issue does not recur when you start your computer in safe mode, you can rule out the possibility that the problem is caused by the default settings, basic device drivers, and services.

More information may be found on the Microsoft website for information technology professionals.

Repair Your Computer

This menu item displays a collection of system recovery tools that you may use to solve startup problems, conduct diagnostics, or restore your computer. Unless the tools are already installed on your computer’s hard drive, this option is not available. In the event that you have a copy of the Windows installation disc, the system recovery tools will be found on that disc.

Safe Mode

This option starts Windows with the bare minimum of drivers and services. To start in safe mode, do the following:

  1. Remove any floppy disks, CDs, and DVDs from your computer, and then restart your computer to complete the process. Start by pressing the Start button, then pressing the arrow next to theShut Downbutton (or the arrow next to theLockbutton), and then pressing the Restart button
  2. Or Choose one of the following options:
  • Remove any floppy disks, CDs, and DVDs from your computer, and then restart your computer to complete the procedure. Start by pressing the Start button, then pressing the arrow next to theShut Downbutton (or the arrow next to theLockbutton), and finally pressing the Restart button. Choose one of the options listed below:
  1. Use the arrow keys to choose the safe mode option you want on theAdvanced Boot Optionsscreen, and then hit Enter
  2. Using a user account that has administrator privileges, log into your computer.
  • On theAdvanced Boot Optionsscreen, use the arrow keys to choose the safe mode option you wish to utilize, and then hit the Enter key. Using a user account that has administrator privileges, log onto your computer

Three Ways to Access the Windows 8 or 10 Boot Options Menu

The “Advanced Options” menu in Windows 8 and 10 is a consolidated collection of boot options that may be accessed from a single screen. This menu gives access to repair tools as well as choices for altering the behavior of Windows at startup, such as enabling debugging, booting into safe mode, and launching into a recovery environment, among other things.

Note: Although the pictures in this post are from Windows 10, the process is essentially the same in Windows 8. Any discrepancies will be pointed out.

What You Can Do on the Advanced Options Menu

The “Advanced Options” menu has a variety of activities that you may perform to debug or repair your computer, including the following:

  • Restore to a previous restore point: This command launches the System Restore application, which allows you to repair some sorts of crashes and issues by restoring your settings, drivers, and apps to a previous restore point that was previously made. To learn more about System Restore, please see our guide to System Restore. System Image Recovery: This program allows you to recover a backup image of your computer. For more information, please see our article on recovering system image backups in Windows. Startup Repair: This command launches Windows’ built-in startup repair utility, which attempts to automatically correct startup issues. Check out our tutorials on how to use the Windows startup repair tool to address startup problems and what to do when Windows won’t boot up properly. in order to obtain further information
  • Launches a basic Command Promptwindow for troubleshooting purposes when your computer has been restarted
  • Enables you to access alternate starting modes and tools, such as Safe Mode, Low-Resolution Video Mode, and boot logging, throughout the booting process. Uninstall Windows and downgrade to the previous version: This feature allows you to uninstall Windows and downgrade to the previous version you were using if you have upgraded within the last 30 days. Please refer to our tutorial on removing Windows 10 and downgrading to Windows 7 or 8.1 for more information on this topic.
You might be interested:  What Is Windows 10 Pro

After selecting one of these choices, Windows will restart and then load into the mode (or launch the program) that you choose. And now that you’re aware of the functions of the “Advanced Options” menu, let’s have a look at how to access to it in the first place.

Option One: Hold Down Shift While Clicking Restart

If your computer is able to start Windows normally, you may rapidly access the “Advanced Options” menu by simply holding down the Shift key while selecting the “Restart” option from the Start menu. Either on the sign in screen (as shown above) or on the Start menu is where you’ll find this option (shown below). This does not result in a restart of your computer soon after you have done so. Instead, it displays a choice that allows you to continue with your Windows session, use troubleshooting tools, or shut down your computer completely.

On the “Troubleshoot” screen, select “Advanced Options” from the drop-down menu.

COMPANION ARTICLE:How to Create and Use a Recovery Drive or System Repair Disc in Windows 8 or 10 It’s important to note that if your computer cannot start Windows normally twice in a row, it should automatically display the “Advanced Options” option.

Option Two: Use the Settings App

In addition to simply pressing Shift+Restart, you can also access the “Advanced Options” menu from the settings app if you like to go through a few more hoops rather than simply pressing Shift+Restart. To enter the Settings app, use Windows+I to bring up the Start menu, and then select “UpdateSecurity.” Select the “Recovery” tab from the left-hand navigation pane. Scroll down a little in the right pane, and then click the “Restart Now” button in the “Advanced Startup” portion of the right pane.

Option Three: Issue a Command with PowerShell (or the Command Prompt)

RELATED: How to Write a Batch Script on Windows XP and Vista You may also access the “Advanced Options” menu by sending a simple command from PowerShell or the Command Prompt, as described above. We’re going to utilize PowerShell for this, but the command is the same regardless of the environment. In addition, you could use this command to construct a batch script, which would allow you to reach the “Advanced Options” menu more quickly in the future. Start PowerShell as an administrator by pressing Windows+X on your keyboard, and then selecting the “Windows PowerShell (Admin)” option from the Power User menu that appears.

Windows then restarts automatically a minute or so later, bringing you to the “Advanced Options” menu for your convenience.

How to enter the BIOS on a Windows 10 PC

(Photo courtesy of Laptop Mag.) Despite the fact that Windows 10 provides numerous configuration choices directly within the operating system, there are some settings that can only be changed in the BIOS (basic input/output system) of every laptop or desktop computer. This software is integrated directly into the motherboard of your computer, and it regulates everything from the boot order of your disks to preboot security choices to whether the Fn key on your keyboard activates a function key or a media control button on your computer.

On certain older computers (or those that have been purposely configured to boot slowly), you may enter the BIOS by pressing a function key such as F1 or F2 when the machine first turns on.

You must follow these procedures in order to gain access to your BIOS on a Windows 10 computer.

  • Here’s where you can find the most recent Windows 11 news. Tip for Windows 11: How to enable TPM 2.0 in the BIOS
  • The TPM requirement in Windows 11 is perplexing everyone – here’s what you need to know
  • The most affordable laptop offers in August 2021

1. Navigate to theSettings menu. On the Start menu, you may access this option by clicking on the gear symbol. (Image courtesy of Future) 2. Select UpdateSecurity from the drop-down menu. (Image courtesy of Future) 3. SelectRecoveryfrom the drop-down option on the left. (Image courtesy of Future) 4. SelectRestart Now from the Advanced startup drop-down menu. The computer will reboot and load a customized menu on the screen. (Image courtesy of Future) 5.ClickTroubleshoot. 6. Select Advanced settings from the drop-down menu.

  1. If you do not see this symbol, select Startup Settings from the Start menu.
  2. 8.ClickRestart.
  3. Avram Piltch, known as “the official Geeks Geek” in his weekly column, has served as the editorial and production director for Laptopmag.com since its launch in 2007.
  4. He graduated from New York University with a master’s degree in English.

Opstarten naar het menu Geavanceerde opstartopties in Windows 11 en Windows 10

In actuality, the menu Geavanceerde opstartopties serves as an opstartmenu. You will find a menu in which you will have access to the opstartinstellings, the secure mode, and a variety of other opstart methods. You may make use of them to assist you in opening and repairing Windows 11 or Windows 10 computers. This is required if you are experiencing problems with your besturing system when attempting to start or complete a task. Afbeelding 1: Opstartopties menuscherm met advanced opstartopties (alleen Engels) Back to the top of the page

Oorzaak

  • If your computer does not boot up after being presented with the Dell welcome screen, try using Method One. When the computer is first turned on, you must use one of two methods to get it running
  • When the computer’s aanmeldingsscherm appears, you should use Methode drie
  • Otherwise, use Methode one. In the event that you need to go to the computer’s desktop sometimes, you will use Methode four to get there.
  • Three different methods are used: Methode One, Methode Two, Methode Three, and Methode Four.

It is possible to use the following methods: Methode One, Methode Two, Methode Three, Methode Four.

  1. Three different methods are used: Methode One
  2. Methode Two
  3. Methode Three
  4. Methode Four
  5. Methode Five.
  1. The following article contains step-by-step instructions on how to create installation media.
  1. In accordance with the indeling that you are using, insert the medium into a USB drive or a DVD player
  2. Remove the PC from the network
  3. Bring the computer up to speed. Tik on the screen with the Dell logo to quickly access the F12 function buttons. On the right-hand side of the screen, you can see that you are constructing a one-time boot menu. Select the device under UEFI BOOT that will be connected to your kind of media (USB or DVD) in the startup menu of the device. When the computer is ready to start, choose your computer’s herstellen from the drop-down menu. OpProbleemoplossing, select the appropriate option. Select “Advanced Options” from the drop-down menu.

Twee Twee Twee Twee Twee Twee Twee

  1. When Windows 11 encounters an opstartfout or a series of opstartfouts in a row, it is known as a rij opstartfout. It would be necessary to automatically open the menu Geavanceerde opstartopties on the following opstarten session.

Methode Drie (Three Methods)

  1. Click on the hetaan/uit-pictogramrightsonder in the Windows-aanmeldingsscherm to bring up the notification window. While the Shift-toetsingedrukt is active, click on the pictogram to the right. new opstarten
  2. New opstarten
  3. New opstarten OpProbleemoplossing, select the appropriate option. Selecteer Options that are cutting-edge

Methode Vier (Fourth Methode)

  1. In Windows, open the Windows-bureaublad by pressing the keys Win + Ite at the same time twice in quick succession
  2. In Linux, open the Linux-bureaublad by pressing the keys Alt + Ite twice in quick succession. SelectSysteem from the drop-down menu on the right-hand side of the screen
  3. Click onRecovery in the menu on the right-hand side of the screen
  4. Activate the knopNu opnieuw opstartenaan the right side of the screen by selecting it underHerstelopties. (Following the option of Geavanceerd opstarten.) The computer is restarted and navigates to a menu of options right away. Select Problem Solving from the drop-down menu
  5. Select Advanced Options from the drop-down menu.

Oplossing

  • If the computer does not start after the Dell welcome screen, you should try Methods 1 and 2
  • If the computer does not start after the Dell welcome screen, try Method 3. As soon as the computer is turned on for the first time, you must do three steps: As soon as you see the computer’s aanmeldingsscherm, you should use Methode four
  • Once in a while, you’ll find yourself at the computer’s desk, and you’ll be dealing with Methode vijf.
  • Methode Een, Methode Twee, Methode Drie, Methode Vier, Methode Vijf
  • Methode Een, Methode Twee, Methode Drie, Methode Vier, Methode Vijf

Methode Een is a Dutch word that means “methode.”

  1. A large number of PCs are equipped with a manufacturer’s system herstelpartition. When you quickly press the F11 function key on one of these computers while it is being re-enabled, you will be sent to the menu.

Twee Twee Twee Twee Twee Twee Twee

  1. You have the necessary materials for this procedure. There is a requirement for Windows 10 startup media or Windows 10 opstartbare installatiemedia.
  1. The following article contains step-by-step instructions on how to create installation media.
  1. In accordance with the indeling that you are using, insert the medium into a USB drive or a DVD player
  2. Remove the PC from the network
  3. Bring the computer up to speed. Tik on the screen with the Dell logo to quickly access the F12 function buttons. U kunthet eenmalige opstartmenu voorbereidenzien dat in de rechterbovenhoek van het scherm wordt weergegeven
  4. U kunthet eenmalige opstartmenu voorbereidenzien dat in de rechterbovenhoek van het scherm wordt weergegeven
  5. U kunthe Select the device under UEFI BOOT that will be connected to your kind of media (USB or DVD) in the startup menu of the device. When the computer begins to transfer data to the media, press the Enter key. uUw computer herstellen are selected in the following week
  6. OpProbleemoplossing, select the appropriate option. Select “Advanced Options” from the drop-down menu.

Methode Drie (Three Methods)

  1. A series of start-up failures occur when Windows 10 encounters a series of start-up failures at the same time. It would be necessary to automatically open the menu Geavanceerde opstartopties on the following opstarten session.

Methode Vier (Fourth Methode)

  1. Click on the hetaan/uit-pictogramrightsonder in the Windows-aanmeldingsscherm to bring up the notification window. While the Shift-toetsingedrukt is active, click on the pictogram to the right. new opstarten
  2. New opstarten
  3. New opstarten OpProbleemoplossing, select the appropriate option. Selecteer Options that are cutting-edge

Vijf Methode (Vijf Methode)

  1. Open the Startmenu on the Windows desktop and select Settings (the tandwielpictogram) from the drop-down menu. ChooserBijwerken en beveiliging
  2. Selecteer SelecteerHerstelin the drop-down menu on the left-hand side
  3. Click on the button onderGeavanceerd opstartenon the button Nuopnieuw opstartenaan the right-hand side of the screen
  4. The computer is restarted and navigates to a menu of options right away. OpProbleemoplossing, select the appropriate option. Select “Advanced Options” from the drop-down menu.

Extra informatie

Alienware, Inspiron, OptiPlex, Vostro, G Series, G Series, Alienware, Inspiron, Latitude, Latitude Tablets, Alienware, Inspiron, OptiPlex, Vostro, G Series, G Series, Alienware, Inspiron, OptiPlex, Vostro, G Series, G Series, Alienware, Inspiron, Latitude, Latitude Tablets, Alienware, Inspir 05th of October, 2021

Dit artikel beoordelen

There will be no special tekens included in the following observations:()

Access the Advanced Startup Options in Windows 11, 10, or 8

TheAdvanced Startup Optionsmenu, which is featured in Windows 11, Windows 10, and Windows 8, is the one-stop shop for all of your operating system’s fix-it requirements. Windows diagnostic and repair utilities such as Reset This PC, System Restore, Command Prompt, Startup Repair, and many others are accessible via this menu. If you are experiencing trouble starting Windows 11, 10, or 8, this is also where you will find the Startup Settings menu, which includes the Safe Mode option, among other startup options that may be able to assist you in accessing Windows 11.

Following the occurrence of two consecutive starting problems, the Advanced Startup Options menu should be displayed automatically.

The easiest approach to choose which strategy to employ is to base your selection on the degree of access you currently have to Windows:

  • If Windows 11/10/8 starts up normally, the following will occur: Use whatever way you like, although methods 1, 2, and 3 will be the most convenient. If Windows 11/10/8 does not start, the following steps should be taken: Methods 4, 5, and 6 should be used. Even if you can’t get past the Windows logon screen, Method 1 will work in some situations.

Duration: Getting access to ASO is simple and might take anywhere from a few seconds to a few minutes, depending on the technique you use. Unless otherwise stated, all of the methods for accessing the Advanced Startup Options menu in Windows 11 work as well in any edition of Windows 10, Windows 8, or Windows 8.1, regardless of the operating system.

Method 1: SHIFT + Restart

Daniel Fishel is a Lifewire contributor. This is by far the quickest and most convenient method of accomplishing your goal. Simply hold down eitherSHIFTkey while selectingRestart from anyPowericon to restart your computer. It is possible to access powericons from the sign-in/lock screen, as well as from the desktop of Windows 11, Windows 10, or Windows 8. All that remains is for you to wait for the Advanced Startup Options menu to appear! The on-screen keyboard does not appear to be compatible with this strategy.

Method 2: Settings Menu

  1. In Windows 11, choose Settings from the Start menu by selecting it with the right mouse button. In Windows 10, click on the Start button, then on the Settings button, which is followed by the UpdateSecurity option. To launch the Charms bar in Windows 8, swipe from the right side of the screen. Change the settings on your computer by selectingChange PC settings. SelectUpdate and recoveryfrom the drop-down menu on the left (orGeneralif you’re on Windows 8.1 or before)
  2. Make your selection from the list of possibilities
  3. Locate Advanced startup near the bottom of the list of choices on the right-hand side of the screen. SelectRestart immediately
  4. Wait through the Please wait warning until the Advanced Startup Options window appears
  5. Then click OK.

Method 3: Shutdown Command

  1. Open the Command Prompt window. Other options include using the WIN+Rkeyboard shortcut to start the Run command if you are unable to start the Command Prompt for any reason, which is likely connected to the problem that brought you to this page in the first place. Otherwise, you will lose whatever changes you have made since your previous save if you don’t save any open files before proceeding. The shutdown command should be executed in the following manner: shutdown /r /o shutdown If you want to cancel the shutdown command after it has been done (for example, if you forgot to save your work!) the shutdown command is executed within the same Command Prompt window After a few seconds, a signoff warning notice will display
  2. SelectClose to dismiss the message. After a few seconds, during which nothing appears to be occurring, Windows will shut and you will see the message “Please wait.” Wait just a few more seconds until the Advanced Startup Options option appears on the screen.
You might be interested:  How To Configure Outlook 2016 Windows 10

Method 4: Boot From Your Windows 11/10/8 Installation Media

  1. Insert a Windows 11, Windows 10, or Windows 8 DVD or flash drive containing the Windows installation files into your computer’s DVD or flash drive drive. If you need to, you can borrow a disc (or other form of media) from someone else. Neither Windows nor its components are being installed or reinstalled
  2. Rather, Advanced Startup Options are being accessed without the need for any product keys or license breaking
  3. What ever your scenario requires, you may either boot from the disc or from the USB device. Then, on the Windows Setup screen, select Next. ChooseRepair your computerfrom the drop-down menu at the bottom of the window. Advanced Startup Options will be activated very soon after installation.

Method 5: Boot From a Windows 11/10/8 Recovery Drive

  1. Insert your Windows 11, Windows 10, or Windows 8 Recovery Drive into a USB port that is not currently being used. If you were not proactive and never got around to making a Recovery Drive, don’t be concerned. If you have another computer running the same version of Windows, or if you have access to a friend’s computer running Windows 11/10/8, follow the procedures in How to Create a Windows Recovery Drive. Start your computer by booting it from the flash device. Select the United States keyboard layout (or whichever keyboard layout you like) on theChoose your keyboard layoutscreen
  2. Advanced Startup Options will begin immediately.

Method 6: Boot Directly to Advanced Startup Options

  1. Start or restart your computer or device
  2. Choose the bootoption for System Recovery, Advanced Startup, Recovery, or any other option you want. For example, hitting the F11 key on some Windows 11/10/8 systems initiates System Recovery mode. What this boot option is termed is entirely up to your hardware manufacturer, and the alternatives listed below are only some of the ones we’ve seen or heard about. Whatever you call it, it should be obvious that what you’re going to do is boot into the sophisticated recovery mechanisms built into Windows. When using a standard BIOS, the ability to boot right into Advanced Startup Options isn’t offered. If you want to boot straight into the ASO menu, your computer must first be able to handle UEFI and then be correctly setup for it. The good news is that this is becoming increasingly prevalent. Wait for Advanced Startup Options to commence before proceeding.

What About F8 and SHIFT+F8?

When it comes to booting into the Advanced Startup Options menu, neitherF8norSHIFT+F8are dependable options. More information may be found atHow to Start Windows in Safe Mode. In the event that you require access to Advanced Startup Options, you can accomplish it via any of the numerous methods indicated above.

How to Exit Advanced Startup Options

You may restart your computer after you’re through using the ASO menu by selectingContinue from the menu bar.

Assuming everything is functioning properly at this point, this will reboot you into Windows. The second alternative is to turn off your computer, which would accomplish the same result. Thank you for informing us about this!

How to access the Boot Options Menu in Windows 10

The Boot Settings Menu is intended to serve as a centralized destination for all of the boot-related options accessible in Windows, rather than a separate menu. It has been accessible since Windows 8 became generally available. Among the options available through the new Boot Options Menu are functions like System Restore, System Image Recovery, Startup Repair, and so on. You will also have access to several functions that were previously only accessible through the use of a boot manager or by sending interrupts to the BIOS if you are running on UEFI.

There is one significant caveat, however: the new Startup Options Menu cannot be accessed by using the F8 key during the boot process.

1. Automatically, when Windows fails to load

As previously stated, it is no longer possible to open the Boot Options Menu by using the F8 key, at least not by default, on Windows 10. Microsoft states that the removal of support for F8 was necessary because the boot mechanism in newer Windows versions is too quick to accurately detect key presses during the boot process. According to Microsoft, the alternative is to automatically load the Boot Options Menu if Windows fails to launch. At the very least, it is what they claim Windows will do.

  1. It is possible that it will only identify a failure if anything strange occurs many times.
  2. In the event that Windows is not launching or displaying the Boot Options Menu, this is the best option to choose.
  3. To repair your computer, select theRepair your computer option in the Windows setup application.
  4. To fix your computer, you can use any Windows DVD or USB stick that you have.
  5. It is not necessary to have the disc’s product key in order to use it to restore your Windows installation.

3. Using a Recovery Drive

It is possible to reach the Boot Options Menu by booting from a Windows recovery disk if you have one available. Simply boot from the recovery disc and pick your keyboard layout from the first screen that appears after booting. The Boot Options Menu will appear on the following screen.

Recovery Drives have not been a really positive experience in my own life. I’ve had a lot of difficulties using them in the past, and when I do use them, I frequently run into issues with missing options. Many folks, on the other hand, swear by it.

4. Using the Settings App

If you are able to log into a Windows account, you may access the Boot Options Menu by using the Settings App in your Windows operating system. Open the settings App from the Start Menu and choose Update and Security from the drop-down menu. In the left-hand pane, select the Recovery option, and then click the Restart Now button.

5. By shift-clicking on Restart

The shortcut SHIFT+CLICKon Restart from the Shutdown Menu is more efficient. The Shutdown Menu may be found in a variety of locations across Windows. It is important to note that it displays on the login screen, which allows someone who is not currently signed into an account to view the boot configuration settings.

6. From the Command Line

The shutdown.exe program has been enhanced with the addition of certain additional command line options. You may use one of them, the /o switch, to go to the Boot Options Menu from the command line. To shut down the computer, open the command prompt and type.shutdown.exe. /r /o /r /o /r /o The /o switch is only effective when used in combination with the /r switch, which stands for Restart.

How To Access Windows 10 Boot Menu (Advanced Options)

The shutdown.exe program has been updated to include some new command line options. It is possible to enter the Boot Options Menu by utilizing one of these switches: the /o switch. Start by typing.shutdown.exe on the command prompt. The /r /o symbol is used to indicate that something is being said. It is only possible to use the /o switch in combination with the /r switch, which is short for Restart.

  • Safe mode is activated
  • Debugging is enabled
  • A recovery environment is launched
  • And so on.

Here’s an example of what a Windows 10 boot menu looks like. Having established a basic knowledge of what a boot menu is, let’s look at some of its capabilities and what they are used to do. When you boot into the advanced settings menu, you will be able to use the following tools to help you debug or repair your computer:

1.System Restore

Restoring your settings, drivers, and applications to a previous restore point allows you to go back to a previous version of the system. This simply implies that if you already have a restore point generated at a previous date, and your computer experiences problems in the future, you may restore your computer to the earlier date at which the restore point was produced. Creating a restore point on your computer is extremely important since you never know when your computer will decide to come on and it is preferable to do so as soon as possible.

2.System Image Recovery

System image recovery enables you to create a backup of your exact duplicate image of your storage drive and save it elsewhere. You may restore the system image recovery file that you created when you backed up your computer to completely restore your settings, drivers, and applications when your machine is in terrible shape. You must have produced a backup in the past before considering restoring any backup in the future, just as you must have created a backup in the past before considering system restoration.

3.Startup Repair

It is possible to backup your exact copy image of your storage disk with the assistance of system image recovery software. It is possible to entirely restore your settings, drivers, and applications when your computer is in a terrible state by restoring the backed up system image recovery file.

You must have produced a backup in the past before considering restoring any backup in the future, just as you must have created a backup before considering system restoration.

4.Command Prompt

Booting into a single command prompt window for advanced troubleshooting is made possible via the command prompt tool, which may be found in the advanced option or boot menu. This is quite handy if you are having trouble booting to the desktop. Additionally, it has several other choices to assist you in troubleshooting your windows. For advanced troubleshooting, you need learn how to boot to the usbusing command prompt.

5.Startup Settings

Booting into a single command prompt window for advanced troubleshooting is made possible via the command prompt tool, which may be found in the advanced options or boot menu. You’ll find this really handy if you’re having trouble booting up to your desktop computer. Additionally, it has several other features to assist you in troubleshooting your windows. For advanced troubleshooting, learn how to boot into the usbusing command prompt.

6.Go Back to The Previous Windows

Advanced troubleshooting may be accomplished with the command prompt tool, which can be found under the advanced option or boot menu. This is quite beneficial if you are having trouble booting up to the desktop. Additionally, it has several other features to assist you in troubleshooting your windows. For advanced troubleshooting, learn how to boot to the usbusing command prompt.

1.Restarting While Holding the Shift Key

This is the quickest and most straightforward technique of booting into the Windows 10 boot menu. Follow these steps:1. Navigate to the Windows icon and click on it. 2. Hover your mouse arrow over the power icon to activate it. 3. While holding down the shift key on your keyboard, press the restart button. Keep your hand on the shift button until your computer has finished restarting. In the event that you get a pop-up box prompting you to select an option, click on Troubleshoot when your computer restarts.

Next, select Advanced Options from the drop-down menu.

2.Through Windows Settings

Here’s how it’s done: 1. To activate the Windows settings menu, use the following key combination on your keyboard. I2 is accessed by pressing the Windows key + I2. Update and security may be found by clicking on them. 3. SelectRecoveryfrom the drop-down menu on the left-hand side. 4. Select Restart now from the Advanced starting drop-down menu. If you notice a pop-up box prompting you to select an option when your computer restarts, click ontroubleshoot when it appears. 6. Next, select Advanced Options from the drop-down menu.

3.Through Command Prompt or PowerShell (Admin)

Throughout this course, you are free to utilize either the command prompt or PowerShell. I will be use PowerShell for the sake of this lesson. Here’s how it’s done: 1.Right-click on the Windows logo icon to bring up the context menu. 2. Select Windows PowerShell from the drop-down menu (admin). In the event that you see a pop-up questioning whether or not you wish to accept this app, select Yes. 4.Enter or copy and paste the following command into the Windows PowerShell window that appears. shutdown.exe /r /o5 is a command-line utility.

6.

To close the window, use the close button.

7. It may take several minutes for your computer to restart. When your computer restarts, select Troubleshoot from the drop-down menu that appears when you see a pop-up box prompting you to select an option. 8. Next, select Advanced Options from the drop-down menu.

4.Through Task Manager

Here’s how it works: 1. Enter the task manager by pressing the following command. Ctrl + Alt + Deleteexclude +2 = Ctrl + Alt + Deleteexclude +2. Click on the power button, which is situated in the lower right-hand corner of your screen. 3. Press the shift key on your keyboard and then press the restart button. restart by using the shift key and restart by pressing the restart key If you notice a pop-up box prompting you to select an option after your computer has restarted, click on Troubleshoot when you see it.

Next, select Advanced Options from the drop-down menu.

5.Force Restart

This step is primarily intended for customers who are unable to access their desktop but are attempting to boot into the Windows 10 boot menu. So, here’s what you’ll have to do: 1. Log out of your computer. 2. Restart your computer and log back in. 3. When your computer has finished loading up to the Windows 10 logo, remove the battery or hold down the power button until your computer shuts off. Make certain that your computer is turned off when the Windows logo is shown on your computer monitor.

  • You must repeat this process 3 – 5 times.
  • At some time, your computer will start up automatically in the advanced option / boot menu setting.
  • When your computer starts into advanced mode, select Troubleshoot from the drop-down menu that appears when you see a pop-up window asking you to select an option.
  • Next, select Advanced Options from the drop-down menu.
You might be interested:  How To Upgrade To Windows 10 For Free

6.Through a Recovery Drive

Here’s how it’s done: 1. Insert your recovery disk into your computer. If you don’t already have a recovery drive, you’ll have to build one before continuing. 2. Start your computer by booting it from the recovery disk. If you are experiencing difficulties, see here. 3. After booting from your recovery disc, pick your preferred keyboard layout from the menu. 4. You will then be presented with the boot menu / advanced option menu.

7.Through an Installation Media

Here’s how it works: 1. Connect your bootable disk to your computer’s USB port. 2. Start the computer by booting from the disk. 3. When the setup screen displays, click on the next button. 4. Select Repair Your Computer from the drop-down menu. Afterwards, you will be presented with the boot menu / advanced option. Here’s the thing: there is no specific key that can be pressed from the starting screen to enter the boot menu. The F12 and F8 keys are often used by most individuals. These specific keys are used to enter the BIOS configuration.

The only thing you have to do to escape the boot menu once you have finished troubleshooting is click on the proceed button to restart your computer in regular mode.

Can’t Start Windows 10, No Access to Boot Menu, Can’t Repair Windows 10 – EaseUS

If you are experiencing problems with your computer’s freshly upgraded Windows 10, such as being unable to start Windows 10, not being able to reach the boot menu, or simply being unable to fix Windows 10, take a deep breath and don’t let these system issues disturb you.

In this post, we’ll provide you with practical solutions to difficulties such as being unable to start Windows 10, having no access to the boot menu, or being unable to repair a Windows 10 system fault.

Help: Can’t start Windows 10, no access to boot menu nor method to repair Windows 10

“My computer was operating normally until it suddenly stopped and went black, with everything becoming dark. And suddenly Windows came to a halt. I attempted to restart the computer, but it failed. I went into the BIOS and saw that nothing had changed. Is there anyone who can assist me with re-launching Windows 10?” “After installing Windows 10, I experienced a system failure error on my computer, which prevented it from booting up after several attempts to restart it. The computer is unable to boot and there is even no access to the boot menu.” “Windows 10 fails to boot even though there is nothing wrong with the system disk, but it does boot from the recovery drive.

There is also no access to safe mode or the command prompt.

Note: If your computer is unable to be switched on at all, consider charging it and attempting to boot it up again.

As a result, you may wish to try recharging your computer and rebooting it to see whether everything is working properly.

Method 1. Boot Windows 10 with WinPE bootable media

“My computer was operating normally until it suddenly froze and became completely black. Window’s then came to a complete stop. Rebooting didn’t work for me, and I gave up. My BIOS had not changed, and I confirmed that this was the case. Is it possible for someone to assist me in re-launching Windows 10?” “After installing Windows 10, I experienced a system failure message on my computer, which prevented the computer from booting up. When trying to boot up the computer, you will not be able to enter the boot menu.” “Despite the fact that there is nothing wrong with the system disk, Windows 10 fails to boot, but it does boot from the recovery drive.

The safe mode and command prompt are not available to you.

If your computer is unable to be switched on at all, try charging it and rebooting it again.

As a result, you may wish to try recharging your computer and restarting it to see whether everything is working properly.

Method 2. Troubleshoot PC can’t boot to Windows 10 error

Step 1.

Unplug all external devices, leaving only those that should be left connected to the computer, such as the monitor, mouse, and keyboard; Step 2. Look for particular problem warnings and their corresponding remedies; Step 3. Step 3: Reset the BIOS to its default settings:

  • Restart the computer and press F2 until the Entering Setup screen appears
  • Then, at the bottom of the screen, hit any key to load the default settings, and press ESC to quit BIOS
  • Make sure to selectSave and Exitto save all of your modifications.

Step 4: Reset Windows 10 to its factory settings.

  • At the Choose an option screen, selectTroubleshoot. Click on Reset this PC and then choose Keep my files
  • Choose your user account and input the password if one has been assigned to you
  • ClickReset

Step 5: Remove any viruses and spyware from your computer. After completing all of these procedures, you may be able to reset your computer to Windows 10 once again, and all of the issues with Windows 10 will be resolved.

Method 3. Reinstall or clean install Windows 10

If you don’t want to save your prior system and data, you may either reinstall or clean install Windows 10 using a media creation tool, depending on your preferences. This approach will then resolve any and all difficulties with Windows 10, including those relating to the inability to start the operating system, failure to enter the boot menu, and failure to repair Windows 10.

How to Access Boot Options Menu in Windows 10 [Solved]

Users may utilize the Boot Options Menu to troubleshoot a variety of issues that may arise with Windows 10. In the boot options menu, you may resolve difficulties by resetting your computer, performing a system restoration, resolving startup issues, and so on. For this reason, understanding how to reach the Boot Options Menu in Windows 10 is vital.

Case 1.

Users may utilize the Boot Options Menu to troubleshoot a variety of issues that may arise with Windows 10. The boot options menu allows you to repair problems by resetting your computer, performing a system restore, fixing startup issues, and so on. Knowing how to reach the Boot Options Menu in Windows 10 is therefore vital.

Case 2.

Users may utilize the Boot Options Menu to troubleshoot a variety of issues with Windows 10. In the boot options menu, you may resolve difficulties by resetting your computer, performing a system restore, repairing startup issues, and so on. As a result, understanding how to reach the Boot Options Menu in Windows 10 is critical.

How to access Advanced startup options on Windows 10 • Pureinfotech

When using Windows 10, you may ultimately need to troubleshoot or alter particular system settings, which you will not be able to accomplish while the operating system is running. The “Windows Start Settings” or “Advanced starting settings” may be used to troubleshoot, diagnose, and solve nearly any problem on the device in these instances. For further information, see “Windows Start Settings.” The startup experience provides a variety of options for troubleshooting and repairing a device. Additionally, because problems can arise from a variety of sources, Windows 10 gives a number of various methods to utilize these tools.

  • Advanced startup may be accessed from the Settings menu
  • Advanced startup can be accessed from the Quick Link menu. From the Command Prompt, you may access the Advanced starting options. From the Windows 10 setup, you can access the Advanced startup option. Automatic Repair provides access to the Advanced starting menu. Instructions on how to use Windows 10’s Advanced starting options

Access Advanced startup from Settings

Follow these procedures to gain access to the “Advanced startup” feature in Settings:

  1. Open the Settings app on Windows 10
  2. Choose UpdateSecurity
  3. Then select Recovery. To access the “Advanced startup” part on Windows 10, select the “Restart” button from the “Advanced startup” section. The Advanced Startup button is located on the toolbar. Please keep in mind that the Advanced startup option in the Settings app is not available while using a Remote Desktop Connection.

Once you’ve completed the instructions, this action will log you out of your current session, allowing you to enjoy the startup experience soon after. To rapidly access the Advanced startup choices, you may also utilize the power menu, which can be found in the Start menu, Task Manager, and Lock screen.

Start menu

The following are the procedures to follow in order to reach the advanced settings in Windows 10 using the power option in the Start menu:

  1. Start by pressing and holding the Powerbutton for a few seconds, then pressing and holding the Shiftkey and clicking the Restartbutton. Menu items with a lot of power

The action will cause Windows 10 to open the Advanced startup menu once you have completed the procedures outlined above. This method is also available in the “Power User” menu (Windows key + X), which is accessible from the “Power User” menu.

Task Manager

Follow these steps to utilize Task Manager to reach the advanced startup menu while starting your computer:

  1. To bring up the menu, press theCtrl + Alt + Deletekeyboard combination together. To turn on the computer, press the Power button in the bottom-right corner. Hold down the Shift key while pressing and holding the Restart button. Power menu accessed by pressing Ctrl + Alt + Del

The computer will log you out of your current session as soon as you are through with the procedures, and Windows 10 will open the Advanced starting choices.

Lock screen

Use the following steps to gain access to the Advanced startup options from the Lock screen:

  1. Activate the Lock screen
  2. Obtain access to the Sign-in screen
  3. The Powerbutton in the bottom-right corner of the screen should be clicked
  4. Then press and hold the Shiftkey while clicking the Restartbutton. Lock down the power choices on the screen

Access Advanced startup from Command Prompt

Follow these procedures to gain access to the troubleshooting and recovery options available through Command Prompt:

  1. Open the Start menu, type Command Prompt into the search box, right-click the first result, and pick theRun as administrator option
  2. Enter the following command into the text box and press Enter: Prompt for the shutdown command with the shutdown options of “/r/o/f/t 00Command”

Create a new shortcut in the Start menu by searching forCommand Prompt and selectingRun as administrator from its right-click menu. Using your keyboard, enter the following command: Starts the shutdown command with the options “r”, “o,” and “f,” and the time is “00.”

Access Advanced startup from Windows 10 setup

If you are unable to boot into Windows 10, you may access the Windows Startup Settings by using a USB flash drive. The following procedures must be followed once you have created a bootable installation media:

  1. The device should be started with the USB bootable media
  2. Then click theNextbutton
  3. And finally choose theRepair your computeroption in the bottom-left corner of the screen. Choose the option to repair your computer.

The Windows Setup will launch the Advanced startup environment once you have completed all of the procedures.

Access Advanced startup from Automatic Repair

You can use the following methods if Windows 10 does not start on your device and you do not have the operating system installation files on your computer:

  1. Once you have pressed the power button and you have seen the blue Windows logo appear, immediately hit the power button again to shut down your computer. Steps 1 and 2 should be repeated twice more. In order for the operating system to enter the Windows Recovery Environment (Windows RE) on the third restart, the operating system must first complete a series of diagnostic checks in order to identify and resolve any booting issues. You will, however, be given the option of accessing the Windows Startup Settings menu item. Automatic repair screen is being prepared in Windows 10
  2. Choose your account and enter your password confirmation
  3. To proceed, click theContinuebutton
  4. To proceed further, click theAdvanced startupbutton. Automatic repair is one of the advanced choices.

When you have finished with the instructions, Windows 10 will launch the Advanced starting environment for you.

How to use Advanced startup options on Windows 10

When you are on the initial “Advanced startup” screen, select theTroubleshoot option from the menu. From the “Troubleshoot” tab, you will be able to access theReset this PCfeature, which will allow you to reinstall Windows 10 without losing any of your data, settings, or apps, or you may complete a clean installation of the operating system, depending on your preference. Option for Advanced Startup and Troubleshooting In the Advanced settings page, you may access a number of troubleshooting tools, such as “System Return,” which allows you to restore your PC to a prior state of excellent working order.

Additionally, “Startup Repair” may be used to resolve a variety of difficulties, such as bootloader faults that prevent the operating system from booting.

The “Startup Settings” option allows you to boot into Safe Mode in order to fix your device if it has been damaged by poor drivers or an issue with a particular program.

While the various methods for accessing the troubleshooting tools are intended to address problems with Windows 10, the same procedures may also be used to diagnose and repair problems with Windows 8.1.

If your computer is protected by BitLocker, you will need to disable the security function before you can use the Advanced startup settings.

Leave a Comment

Your email address will not be published. Required fields are marked *