How To Change Boot Drive Windows 10


How to Change Boot Drive Windows 10? Here Is a Detailed Tutorial

Are you considering changing the boot drive on your Windows 10 computer? Don’t be concerned if you’re unsure of what to do at this point. Here is a full explanation on how to alter the boot drive using MiniTool Partition Wizard, which you may use to change the boot drive that best suits your needs.

What Is a Boot Drive

It is a physical device that includes the operating system necessary to start a computer when it is first powered up. Among the various types of drives are hard drives, floppy disk drives, CD/DVD/CD-ROM drives, and USB flash drives. A hard disk is the most often utilized boot drive in most computers. An operating system is pre-installed on the hard drive when you purchase a new computer, and you may use it without having to install any other software. Users frequently need to update the boot disk of their computers as long as they have been in use.

  • They wish to upgrade the boot drive to a new solid-state drive (SSD) to improve performance. There is insufficient capacity on their current boot disk, and they want a larger one
  • They have seen indicators of hard drive failure and intend to replace their boot drive as soon as possible before it causes more damage.

Most ordinary users may find it tough to replace their boot disks on their own, especially if they are doing it for the first time, but it is possible. Don’t be concerned if you are one of them. The following sections include a comprehensive explanation on how to change the boot drive.

How to Change Boot Drive Windows 10

It is generally agreed that there are three parts to the process of replacing a computer’s boot drive:

  1. Make a backup of your data. Transfer the operating system from the old to the new boot disk or do a clean installation of Windows 10. It is necessary to replace the old hard disk.

Let’s take them one by one and look at more in-depth information about them.

Stage 1: Back up Data Before You Change Boot Drive Windows 10

It is a given that you should back up your data before changing the boot disk. You will be able to avoid sudden system failure or data loss in this manner. Furthermore, it is preferable to data recovery after a crash. You may create a backup of your computer using a USB flash drive or an external hard disk. In addition, MiniToolShadowMaker, a dependable backup application built by MiniTool, may be used as a backup software. This utility assists users in creating an image as a backup option, which means that the backup will not take up a lot of space on the computer’s hard drive.

  • Connect a USB flash drive or an external hard disk to your computer as the first step in the process.
  • Download it for free.
  • 4) Select the Sources selection from the Backuptab by selecting it from the Backuptab.
  • To proceed, simply click OK.

Then press the OK button. Step 6: Select “Return to top” Now is the time to begin the backup procedure. After that, all you have to do is wait patiently for the procedure to be completed. Afterwards, you may unplug your USB flash drive or external hard disk and go to the following step.

Stage 2:Migrate OS or Clean Install Windows 10

After you’ve backed up your data, you can replace the boot disk without fear of losing anything. As previously stated, a boot disk must include all of the files necessary for a computer to boot up. If you wish to boot from a different hard drive, you must first install an operating system on the disk in order to be able to boot. You now have two options: the first is to use a third-party tool to migrate your operating system from your old boot drive to the new hard drive, and the second is to completely reinstall Windows 10 on the new hard drive.

  1. MiniTool Partition Wizard is a disk partition management tool that is both professional and dependable.
  2. Among other things, you may use it to resize a partition, recover data from a deleted partition, check for hard drive issues, and clone a disk.
  3. You can also select whether or not to replicate your non-system files throughout the process.
  4. Let’s have a look at how to utilize the MiniTool Partition Wizard.
  5. Tip: If your computer has a suitable slot for your new hard drive, you can install it as a second hard drive without having to format it first.
  6. Step 2: To download MiniTool Partition Wizard, click on the link provided below the video.
  7. 3.
  8. When the pop-up box appears, pick optionA if you intend to copy the contents of the entire disk.
  9. Then click on the Next button to proceed.
  10. A word of caution: If you choose a hard drive that contains data as the destination disk, all of the data on that hard drive will be erased during the transfer.
  11. Depending on your preferences, you may customize the copy settings and target disk layout on this page.
  1. If your destination disk is a solid-state drive (SSD), you might consider increasing the alignment partition size to 1MB to optimize speed. You should checkUse GUID Partition Table for the target drive if your destination disk is greater than 2TB so that you may take use of the additional storage capacity.

After reading the letter that explains how to boot from the new hard drive, clickFinish to complete the process. Once you’ve finished, clickApply to begin the data migration process. Because the procedure will take some time, you should be patient throughout this period. Please do not turn off your computer during this procedure. As soon as the data transfer is complete, you may shut down your computer and alter the boot order so that your machine will boot from your newly installed hard drive.

  1. Option 2: Reinstall Windows 10 from scratch.
  2. In order to accomplish this, you must first obtain the most recent Windows 10 installation ISO file from the Microsoft website and burn it to a USB drive or CD/DVD, after which you will utilize the USB drive or CD/DVD to install Windows 10.
  3. Connect an empty USB flash drive to your computer as the first step.
  4. Step 2: Open the downloaded file and confirm that you have read and agree to the notifications and licensing conditions.
  5. Step 3: Click Next to proceed.
  6. Then click on the Next button to proceed.
  7. Step 5: Select your USB flash drive and press the Next button.
  8. Step 6: Shut down your computer and plug in your new hard drive to the computer’s port.
  9. To install Windows 10 on your new hard drive, simply follow the on-screen instructions that will appear.

Immediately following the installation of Windows 10, you can remove the USB flash drive and attempt to boot from the new hard drive. You can go to the next level if your machine boots up correctly.

Stage 3: Replace Your Old Boot Drive with the New One

Once you have successfully transferred your operating system or reinstalled Windows 10, you may remove your old boot drive and replace it with the new one. However, if your computer has enough hard drive slots to accommodate both hard drives, you can choose to leave the old one in place as well. If this is the case, you can format it and use it as a second hard drive to store data on. For those who are unsure of how to remove the old hard drive, the following post may be of assistance to you: Steps 1 through 7 are as follows: What is the best way to remove the hard drive from a laptop?

The following steps will show you how to modify the Windows 10 boot disk.

Please see the following tutorial for further information.

Bottom Line

If you are unsure of how to change the boot disk on Windows 10, don’t be concerned. This page has a thorough explanation of the process. Any queries you might have can be posted in the comments area below. If you have any issues when using MiniTool Partition Wizard, you can contact for assistance in resolving the issue.

Change Boot Drive Windows 10 FAQ

What is the best way to pick which disk to start Windows 10 from?

  1. Restart your computer and go into the BIOS settings. Go to the beginning of the game
  2. To alter the boot sequence, press the + and – keys simultaneously. SelectSaveExit

Details of the procedure may vary depending on the computer’s manufacturer. When booting up Windows 10, what is the boot menu key to press? It is possible that the boot menu key on computers made by various manufacturers will be different. The keys Esc, F2, Del, and F12 are often used. Typically, when the logo of the manufacturer shows during the start process, you will be able to see how to input BISO. You may also consult the user manual or do an internet search to obtain the necessary information.

How to Setup SSD/HDD and Change System Disk for Windows 11/10 – EaseUS

“Hello, do you know how I may replace the system disk on my computer? I intend to replace the old hard drive with an SSD as the operating system drive and the old hard drive as the storage disk for my computer. Is it possible for me to accomplish it on my own? How?” “I recently purchased a new solid-state drive (SSD), and I want to install my current Windows 10 on the new SSD while leaving the current hard disk as a data storage device. What is the best way to effect change? I’m referring about how to modify the system disk and make the SSD the primary system drive.

We’ve provided you with two practical solutions to this problem in the sections below: Method 1: Replace the System Disk By migrating the operating system to a hard drive or solid state drive Method No.

Preparations – Backup System, Data and Set Up SSD/HDD

Before you begin, there are a few steps you need do to ensure that your new SSD or HDD is ready to be used as the system boot drive on your computer. Tip 1: Create a backup of your Windows system and data first. It is strongly suggested that you back up your current Windows system and vital data on your computer before replacing the system disk between SSD and HDD. This will help you prevent unexpected system failure or data loss problems. Backup Windows 10 to a USB drive is another option. Tip 2: Configure a new disk (SSD or HDD).

For further information, see How to Install a New Hard Drive or Solid State Drive. Back up any data stored on a used or a data drive to another device first before proceeding. A backup to an external hard drive will be the most reliable method of protecting your data.

Method 1. Change System Disk By Migrating OS to HDD/SSD

Change the system drive, relocate the operating system to a new SSD or HDD, and switch the Windows operating system to a new disk. This simple solution allows users to immediately replace their operating system disk without having to reinstall the operating system on Windows 11/10/8/7, and so on. All you need is a competent partition management program that allows you to effortlessly transfer your system from one hard drive to another.

  • The following tools are required: EaseUS Partition Master, which includes the “Migrate OS to HDD/SSD” capability
You might be interested:  How To Use Headphones With Built In Mic On Pc Windows 10

EaseUS Partition Master enables you to move your system across hard drives and solid state drives (SSDs), allowing you to easily switch between your system disk and storage disk. And it will just take a few easy clicks to do this.

  • Tutorial – Download this program for free and follow the instructions below to get started right away:

Please keep in mind that the procedure of migrating the operating system to an SSD or HDD will destroy and remove existing partitions and data from your destination drive if there is insufficient free space on the target disk. If you have vital data stored on the device, make a backup copy of it to an external hard drive in preparation. Step 1. From the top menu, select “Migrate OS.” Step 2. “Next” will appear once you have selected the SSD or HDD as the target drive. Step 2.After seeing the warning notice, click “Continue.” There will be no data or partitions on the target disk after it has been erased.

  1. If you haven’t already, do so right away.
  2. Click on the disk layout choices if you wish to change the layout of your target disk to something more customized.
  3. When you have completed the procedure, all that remains is to configure the computer to boot from your new hard drive or solid state drive (SSD) by altering the boot order in BIOS.
  4. Restart the computer and hit the F2/F8/Del keys to access the BIOS configuration.
  5. Step 3: Save the modifications and quit the BIOS configuration.
  6. Following this, your Windows will automatically boot from the new drive and not the old one.
  7. After that, you may erase the old system partition from your old disk and establish a new partition for storing data on that drive.

You can reactivate Windows using your key if a notification from Microsoft Windows appears and asks reactivation, or you can contact the Microsoft support staff for more assistance.

Method 2. Clean Install OS to New SSD or HDD and Change OS Drive

Change the boot drive by installing a fresh or clean Windows operating system on a new SSD or HDD, or by installing Windows on a second drive. Those who are dissatisfied with their current operating system can use this approach to install a fresh copy of the Windows operating system on their new SSD or HDD. This approach may also be used to configure an SSD or HDD as a new operating system drive on Windows computers, albeit the process may be a little more complicated. Follow these steps to completely reinstall the operating system on your new SSD and make it your boot disk.

  • Preparations – Prepare an empty USB drive (8GB maximum), download the Windows Media Creation Tool, and obtain a Windows product key (which will be activated after installation). Tutorial -How to install Windows 10 on an SSD or hard drive and configure it as the boot drive:

Step 1. Create a bootable USB drive with Windows installation media. The Windows Media Creation Tool will be launched when you double-click it. Select USB as the destination for the Windows Installation Media. Step 2.Start the computer by booting it from the USB installation media. Remove the previous system disk from your computer. Insert the new SSD and bootable USB into your PC, restart the computer, enter BIOS, and select “Boot from Installation Media” as the boot option. Installing Windows on a new disk requires you to set up your preferences first.

  1. Step 4: Install Windows on the newly purchased SSD.
  2. Allow for the completion of the process.
  3. After the installation is complete, restart your computer and enter BIOS to convert the boot drive to SSD as the operating system disk.
  4. Shut down the computer, remove the installation USB device, reinstall the original hard drive in the computer, and restart the computer.
  5. If you wish to have a machine that can run two operating systems at the same time, you may stop here and partition the disk to create a second partition to store your backup data.
  6. Then you may build a new partition on your data drive in order to copy the backup data back to the original disk.
  7. And please proceed with extreme caution.


This page describes two practical and effective methods for transferring your operating system to a new system drive or for reinstalling Windows on a new SSD or HDD. If you’re still not sure which route is best for you, consider the following suggestions:

  • In the event that you merely want to swap the system drive, change the system disk to a new SSD or a larger HDD while keeping the operating system, Method 1 using EaseUS Partition Master may assist you

It will assist you in moving your operating system to an SSD or hard drive without having to reinstall Windows.

It is not necessary to re-enable the new SSD as the boot drive in the BIOS. Everything will be completed throughout the migrating procedure.

  • If you wish to establish a dual-boot operating system by installing two different versions of the Windows operating system on your computer, or if you want to clean install Windows on a new SSD or HDD, Method 2 with the Clean Install Windows instruction is a viable option.

Keep an eye on things during the installation, and don’t forget to set up an SSD or HDD as the boot drive when the installation is complete. Windows will not boot from the fresh drive if this is not done.

People Also Ask

It is the purpose of this article to address the question “How can I replace the system disk and set up a new SSD or HDD as the boot drive?” Some folks, on the other hand, looked for comparable queries on Google. We will raise three of the most often asked questions and provide a response to each topic. If you are experiencing the same questions in your mind, you may find the solutions right here. 1. How can I change the boot drive or boot disk that I’m currently using? In order to change the boot drive, your other disk must have the Windows operating system installed on it.

  • If you use the first technique to migrate your operating system, you will just need to restart your computer, and Windows will automatically boot from the new disk you have created. Unless you used the second option to completely reinstall Windows operating system on the new drive, you will not need to perform anything more. If you did, follow the instructions below to change your boot drive:
  1. Step 1: Turn off the computer and remove the old hard disk. Restart the computer and hit F2, F10, or the Del key to enter the BIOS. Go to the Boot order section and choose the new disk to be used as the boot drive
  2. Then save the modifications. Step 3. Step 4: Restart your computer.

If everything goes according to plan, shut down the computer and reinstall the old disk in your system. It should be restarted. 2. How can I transfer Windows 10 to a new solid-state drive? Transferring Windows 10 to a new SSD is quite similar to the procedure outlined in Method 1 on this website. Using EaseUS Partition Master to do the OS migration task, you may securely install the SSD on your computer and then reboot your machine. When the procedure is complete, all that is required is a restart of the computer.


There are two methods that you may use to move your operating system to a new hard drive:

  1. 1) Directly migrate the operating system to the new hard drive
  2. 2) Clone the operating system to the new hard drive and configure the new disk as the boot drive

As an alternative, if you prefer the first method, you may go directly to Method 1 on this page for a more complete explanation. If you decide to clone the system to the new drive, follow the instructions in the article Transfer OS to New Hard Drivewithout Reinstalling Windows.

What to do if you decided to change your boot drive in Windows 10

You will learn the following information: Are you ready to take on the world? Let’s get to reading!

Why might you decide to change your boot drive in Windows 10?

Many PC users are updating their hard drives to solid-state drives (SSDs) since SSDs are quicker and less in weight than traditional hard drives. While standard HDDs normally offer greater storage space than SSDs, some individuals choose to utilize both hard drives at the same time, with one serving as the boot drive and the other serving as the primary storage drive; this is known as a dual-boot configuration. SSDs should be utilized as boot drives, with HDDs serving as the primary storage drive, since this is considered best practice.

What to do before changing a boot drive

It is critical that you follow these instructions carefully before replacing the boot disk on your computer; otherwise, you risk losing highly essential files. When trying to alter a computer system, the first thing you should do is make a complete backup of all of your information. This will save you from having to deal with any of the mayhem that can occur as a result of the procedure of switching the Windows boot disk. Using DiskInternalsPartition Recovery to create a disk image file of your computer’s data is an excellent method of preserving your data.

Create an image file in three simple steps using DiskInternals Partition Recovery by following the on-screen instructions. All that is required is that you download and install the program on your computer, then follow the steps below:

  • Using DiskInternals Partition Recovery, restore your partitions and then shut the Recovery Wizard that will appear automatically.

The DiskInternals Partition Recovery-Recovery Wizard is launched on its own by default.

  • If you wish to create an image of a disk, first choose it from the “Drives” drop-down menu on the top menu bar, and then select “Create Image.”
  • Now pick “Entire Disk Contents” and then click on “Browse.” to select a location for the picture file to be saved

DiskInternals Partition Recovery – the disk image is preserved once the partition recovery process is completed. It is, however, recommended that disk image data be saved on external storage devices. The DiskInternals Partition Recovery program, on the other hand, can assist you if you have accidentally erased some vital information from your computer and need to recover such items. Recovery of lost or deleted files may also be accomplished in a matter of clicks using DiskInternals Partition Recovery.

How to change the boot drive to SSD in Windows 10

1. Make a copy of the drive A backup of your hard disk is required for your own protection. In order to copy or migrate data from one disc to another, you may make use of a few of useful software applications. 2. Configure the boot device in the BIOS. It doesn’t halt the process of copying your hard disk to the SSD. After you have completed the cloning process, you need do the following manual procedures:

  • When the computer restarts, continue pressing the F2/F12/DEL keys on the keyboard to enter BIOS mode.

It is possible that you may need to disable secure boot control on your PC in order for the SSD to function as a bootable disk.

Last resort to change the boot drive

You can opt to install a fresh operating system on your new SSD or HDD and set it as your default operating system drive, however the procedure is time-consuming. Most importantly, you will require a USB storage device with a minimum capacity of 8 GB.

  • Creating Windows Installation Media on a USB flash drive is simple.
  • Restart the computer, enter BIOS mode, and boot from the installation disk
  • Then repeat the process.
  • In order to complete this step, restart the computer in BIOS mode, and boot from the installation disk
  • After Windows has been installed, restart the computer in BIOS mode and select a different boot disk.
  • You may now use the old disk as a data drive by mounting it and setting it as such.

How to Change Boot Drive to SSD Easily in Windows 10

“I had a problem with one of the most recent Microsoft upgrades, and my PC crashed.” As a result, I had to take my computer to a repair shop and have Windows reinstalled. When I received my machine (laptop), I discovered that Windows had been reinstalled on my hard drive rather than my SSD. I’m attempting to rectify the situation right now. I’ve previously copied Windows to the SSD and installed it. In earlier tutorials, I’ve been following the steps that tell me I need to alter the boot option in the BIOS when the computer first boots up.

You might be interested:  How To Reboot Computer Windows 10

This option is also not visible when checking under Hard disk drive BBS priority, with the only choice seeming to be my hard drive.

“Any assistance would be much appreciated.” To migrate Windows to your SSD, you must first clone the Windows 10 operating system to the SSD using cloning software, and then change the boot drive in the Windows 10 BIOS after the cloning has been completed.

It will be demonstrated in this post how to migrate Windows 10 to an SSD and how to change the boot order after the cloning process.

Why Make SSD as Bootable Drive?

In the event that computers are having difficulty loading huge files or running several apps, many users will choose to replace or upgrade their hard drives to solid state drives (SSDs).

SSD is speedier, more stable, and produces less noise as compared to hard disk drives (HDD). SSDs, on the other hand, typically have smaller storage capabilities and are more costly than HDDs. As a result, SSDs are typically used as boot drives, whereas hard drives (HDDs) are used for data storage.

How to Install the SSD

It is necessary to install the SSD on the computer and verify that it can be detected by the computer before we can begin the migration of the Windows 10 operating system to the SSD. You’ll need an SSD, a screwdriver, a SATA cable, and two screws to complete this task. Then you may proceed with the installation of your SSD by following the procedures listed below. Step 1: Remove the case cover from your desktop by unscrewing and pulling it out. Then, connect a SATA connection to the SSD and insert the SSD into the SSD drive slot to complete the installation.

Step 3: Reinstall the case cover on your PC and secure the SSD within it.

How to Migrate Windows 10 OS to SSD

Following the installation of the SSD, you may proceed to the next step, which is to migrate the Windows 10 operating system to the SSD. If you need assistance, you may use a professional cloning program, such as AOMEI Backupper Professional, which can simply clone the operating system to an SSD in Windows 10, 8, and 7. There are a number of benefits to using it as well:

  • Secure boot: After cloning, you will be able to safely boot your system from the cloned SSD without having to reinstall your operating system. Intelligent Clone: It not only allows customers to clone their systems to SSDs of equal or greater capacity, but it also allows them to clone Windows 10 to a smaller SSD. SSD Alignment: By enabling this option, the reading and writing speeds of SSDs are significantly increased. Using the live clone feature, cloning activities may be carried out in the background, allowing users to continue using the computer as usual during the cloning process. SSDs are available in a variety of shapes and sizes. It supports a variety of SSD kinds, including SATA, M.2, and PCI-E, as well as a variety of SSD brands, including WD, Acronis, and Crucial.

Because the clone will erase all data on the destination disk, it is recommended that you back up your contents to an external hard drive in preparation. Following that, you may follow the instructions in the following guide to migrate your Windows 10 operating system to your SSD. Step 1: Download AOMEI Backupper Professional, install it, and run it to begin working with it. Clone the system with SelectCloneSystem. Step 2. Because the source disk has already been selected, you simply need to pick the SSD as the destination location.

All partitions required to start the machine, including the EFI system partition, will be cloned throughout the process.

Then, when you’ve confirmed your actions, click Start Cloneto migration Windows 10 OS to SSD.

Please ensure that your destination disk is either the same size as or greater than your source disk before proceeding.

How to Change Boot Drive after Clone in Windows 10

Afterwards, you may proceed to the final step in the procedure, which is changing the Windows 10 boot drive from HDD to SSD in the BIOS settings. The particular steps are outlined below. Restart your computer in the first step. To enter BIOS, keep hitting the F2 key, F8 key, F11 key, and DEL key. Step 2: To modify the boot order, select the boot option from the menu bar. Make the SSDas the first boot option to be selected. 3: Save your modifications and leave BIOS by pressing the F10 key. Once the machine has been restarted, your Windows 10 will begin to boot from the cloned SSD.


I believe you have mastered the process of changing the boot disk in Windows 10 to an SSD. First and foremost, you must backup your Windows 10 operating system to an SSD. The professional cloning program AOMEI Backupper Professional is highly recommended since it allows the disk to start securely once it has been cloned, which is essential for data recovery. It is simple to modify the boot order in the BIOS and boot your Windows 10 from the SSD after that. Furthermore, it offers Disk Clone and Partition Clone, which includes features such as cloning dynamic disks, cloning MBR to GPT, cloning GPT to MBR, and more.

You may get it for free if you want to take advantage of its additional features. For those who utilize Windows Server, there is AOMEI Backupper Server, which is a good option.

4 Ways To Change The Boot Order In Windows 10

The boot menu appears every time you switch on a computer that has more than one Windows operating system installed. For example, if you have installed Windows 10 and Windows 7 in a dual boot configuration, you will be presented with a boot menu, from which you may choose to boot into the non-default operating system or to allow the boot menu to automatically launch into the default operating system. By default, the most recently installed or most recently updated operating system is the default operating system on the boot menu, regardless of when it was installed or upgraded.

If you need to modify the default boot sequence in Windows 10, you may do it without the use of third-party programs.

Method number one of four

Change the boot order in Windows 10 via System Configuration

Step 1:In the Start/taskbar search area, typemsconfig, and then hit the Enter key to bring up the System Configuration dialog box. Step 2: Select the Boottab option. Choose the operating system that you wish to use as the default and then click the Set as default option to make it the default. To submit your application, click theApplybutton. You may also modify the default waiting period of 30 seconds to a time of your choosing from this screen. Method number two of four

Change the boot order in Windows 10 via advanced options

Step 1: Exit any and all currently active apps. Restart your computer. In the boot menu (pick an operating system) screen, choose Change defaults or select another operating system from the drop-down menu. Step 3:After that, you will be presented with the Optionsscreen. Choose a default operating system tile from the drop-down menu. Choose a default operating system is the fourth step, and it displays the default operating system on the screen. The operating system that appears at the top of the list is often the default operating system.

  1. For example, I am selecting Windows 10 from the list of available operating systems to make it the default operating system.
  2. You will not receive a confirmation message after submitting your form.
  3. To return to the previous screen, click theBackicon.
  4. The default operating system will be displayed at the top of the list in this case.
  5. Method number three of four

Another way to change the boot order in Windows 10

Step 1: Launch the Settings application. Select UpdatesecurityRecovery from the drop-down menu. Step 2: In theAdvanced startupsection, select theRestart nowbutton and press Enter. Step 3:Your computer will restart, and you will be presented with the Choose an optionscreen following the restart. Use another operating system by selecting it from the drop-down menu. Step 4: On the Choose an operating system screen, select Change defaults from the drop-down menu. Step 5:After that, you will be presented with the Optionsscreen.

Lastly, choose the operating system entry that you wish to make the default and click on it to make it the default.

To return to the Choose an operating system screen, click on the Backicon on the toolbar. You may view the default operating system in this section. On the left-hand side of the screen, you’ll see the default one. To boot into a certain entry, simply click on it. Method number four of four

Change the boot order in Windows 10 using EasyBCD

EasyBCD is a must-have program for everyone who uses a dual-boot computer. Not only can you modify the usual boot order with EasyBCD, but you can also add a new operating system to the boot menu with relative ease. How to modify the boot order in Windows 10 by using the EasyBCD utility is demonstrated in this tutorial. Step 1: Download and install EasyBCD on your computer. It is solely for personal and non-commercial usage that the free version is available. EasyBCD will be launched in the second step.

To move an entry up or down in the Modify Menu Entriessection, select it and then click the Up or Down arrows to the right or left of it.

Also available is the option to modify the countdown period from the usual 30 seconds to anything different.

Finally, click the Savesettings button to save your changes.

Change Windows 10 Boot Drive

Users may find themselves in the position of having to change their boot drive; however, not everyone is familiar with the procedure. Although it is the most popular technique of altering your computer’s boot device to do it through the computer’s firmware, it is essential to note that this is not always the only approach available. It may be necessary to change the boot disk in order to execute various installation, diagnostic, and recovery software on the computer. Everything you need to know about changing the boot device will be covered in this post, which should take no more than a few minutes.

Part 1: Change the Boot Drive in Windows 10

Q: I need to install Windows 10 on my new solid-state drive (SSD), and I have a flash drive with the operating system installation software. However, I am unable to begin the installation since my computer begins by booting from the hard disk. Could you perhaps assist me in selecting my flash drive as the boot drive? A boot drive is a storage device that is used to start a computer even if it does not have an operating system installed on it. Boot drive refers to the disk that contains the operating system, however it can be changed if and when it is determined to be essential.

Depending on the function for which you want the boot drive, 1 GB of storage space is sufficient for antivirus and security applications, 8 GB is necessary for Windows installation, and many GB may be required for data recovery if you need to restore your data.

Part 2: When You Want to Change Boot Drive in Windows 10?

As previously stated, the boot drive is typically the one that contains the operating system, because the majority of users are accustomed to using Windows and the applications that are required; however, it may be necessary to change the boot drive order, in which case your UEFI or BIOS will look for a different device to start the computer. Following are some of the reasons why it may be required to change the boot disk in Windows 10 (and how to do so). Installing Windows after a drive has been formatted is as follows: If you wish to install Windows on a reformatted disk, the only method to do so is through a bootable drive.

  • In order to activate the installation, Windows must be installed in a “bootable” manner.
  • The recovery drive may be created using a Windows program, and it can be used to restore your computer’s data if it has been damaged.
  • This implies that it will be sufficient to just boot your computer from your recovery disc in order to make use of it.
  • There are bootable antiviruses available, and many users keep one of them on their hard drive as a preventative step.
  • Data destruction software should be used: This sort of software can be put on your boot drive and used when the disk is booted up.

Using this program, you may be certain that any suspicious or virus-infected file has been totally erased from your computer’s hard drive and that no trace of it remains.

Part 3: How to Change Boot Drive in Windows 10?

For those experiencing booting issues such as denied access or other issues before attempting to replace your boot disk, there are two techniques I will offer for resolving these.

You might be interested:  How To Change The Screen Resolution On Windows 10

Method 1. Use Diskpart to fix UEFI boot error in Windows 10 / 8 / 7:

You can try to repair the boot error by running the diskpart command from the command prompt. Please keep in mind that this process only works with UEFI booting; if you choose to boot using BIOS, this will not work. If you want to ensure that your system boots with UEFI, you must perform the following steps: Step 1: Navigate through the available options. You must boot from the disk or USB drive that contains the Windows installation package in order to complete the installation. Click on “Next” in the first window, and then on “Repair your computer” on the second window to complete the process.

Select “Command Prompt” from the “Advanced options” menu after clicking on “Troubleshoot.” Step 3: Enter the appropriate instructions Type the following instructions (be sure to hit enter after each one): As you can see, CMD will list the volumes of your disk.

In this case, is “Volume 1.” Step 4: Type fixing commands and finish process Now type these commands:

  • Vol 1 should be selected (remember that the number 1 is there since the UEFI volume is volume 1)
  • Letter=V (you may change “V” for another letter different from the other volumes if you see the “Ltr” column, and then you can confirm which letters you are not allowed to use
  • In this case, the letters F, C, E, and D are not permitted)
  • Exit
  • V: (the same letter you assigned)
  • Letter=V (the same letter you assigned)
  • The following commands are required: MD “efi” “microsoft” “boot”
  • Cd “efi” “microsoft” “boot”
  • Bootrec “fixboot
  • Bcdboot “windows” /l “en-us” “V: “/f” exit
  • All (the letters “us” stand for localization, in this case, the United States
  • You may change these letters depending on your country, for example, “GB” stands for the United Kingdom and “fr” stands for France
  • If you have any doubts about your country letters, you can check the official list in the ISO 3166 1 Alpha 2 letter country codes)

If the boot errors are not resolved by this technique, you may proceed to the next approach, which is described below.

Method 2. Use Automatic Repair to Repair Windows 10 / 8 / 7 UEFI:

There is an utility available that will assist you in resolving boot-related issues. This method, like Method 1, is only compatible with UEFI. To complete this activity, follow the procedures outlined below: Step 1: Navigate through the available options. You must boot from the disk or USB drive that contains the Windows installation package in order to complete the installation. Click on “Next” in the first window, and then on “Repair your computer” on the second window to complete the process.

To troubleshoot, select “Troubleshoot” from the drop-down menu and then “Advanced options” from the drop-down menu.

Method 3. Change the Boot Order in Windows 10 via System Configuration:

You may modify the order of your boot drives using your System Configuration. To do so, you must first enter your BIOS settings or UEFI firmware, which can be accessed by pressing a function key (F1, F2, F3,.), ESC, or DEL simultaneously. Now that you’ve registered, simply follow the instructions below: Step 1: Select the Startup option from the Start menu. Select Startup using the arrow keys on your keyboard (or “Boot” in some cases). Step 2: Press the “Boot” button. To access the “Boot” submenu, use the “Enter” key.

To pick the disks or drives, use the arrow keys to go through the menu.

Step 4: Save and confirm your changes.

Following completion of the boot device purchasing process, hit the “F10” key to save your settings. Then click on “Yes” and hit “Enter” to finalize the procedure and quit the application program. Your computer will now start up with the device that you selected during the boot process.

Method 4. Change the Boot Order in Windows 10 via Advanced Options:

If you were unable to access your UEFI firmware with the keys, there is another method you may use to do this. The following steps will guide you through the process of entering UEFI firmware using Advanced Options: Step 1: Navigate to the settings menu. By selecting the gear icon from the Windows menu, you may access the settings. Step 2: Navigate to the UpdateSecurity options window. In the Windows Settings box, select “UpdateSecurity” from the drop-down menu. 3: Restart your computerIn this box, select “Recovery” from the left-hand menu and then select “Restart immediately.” Your computer will restart as soon as it is finished.

Now pick “Troubleshoot,” then “Advanced options,” and lastly “UEFI Firmware Settings” from the drop-down menu.

Restore your data

You should keep in mind that if you need to install Windows or erase any information with viruses, you must first create a backup of your data; nevertheless, this is something that is often neglected or simply not taken into consideration by the user. Whatever the cause, there is always a solution, and that answer is Recoverit, a dependable, professional, and safe software package that can assist you in rescuing your information even if your drive has been formatted. To use it, you only need to make a few easy clicks, as you will see below: You may get it from here.

After you’ve installed and launched the program, navigate to the disk where the erased data was stored and click on it.

All that remains is for you to choose the folder or folders that you wish to recover or restore and then click on “Recover.”


Changing your Windows boot drive provides numerous benefits, including the ability to perform some definitive and critical processes that are required for your computer to continue to function. Although many applications may be restricted if your operating system is not present, bootable programs can be used to repair and benefit your computer when your operating system is not present. Apart from that, you may use Recoverit to recover information that has been wiped by a virus or that has been lost after reformatting your hard drive.

How to change Boot order in Windows 11/10

When your computer starts up, the first thing that loads is the UEFI Firmware or the BIOS (Basic Input/Output System). It performs a variety of functions, one of which is the ability to choose which hardware should be used to boot Windows. To boot from a USB drive or an external disk on Windows 11/10, you must first modify the boot order of the operating system. The default setting is usually set to the first hard disk that is attached to the computer. Prior to Windows 11/10, the only way to enter BIOS was to restart your computer and then hit a special key on your keyboard, such as F2 or DEL, to boot into your computer.

One of the alternatives is to boot into BIOS, which makes it a lot simpler if you have a habit of forgetting to push the key. The following instructions will demonstrate how to boot into the Windows 11/10 firmware settings (UEFI/BIOS) and modify the boot order quickly and efficiently.

Change Boot Order in Windows 11/10

The Windows 10 Recovery System enables you to access your UEFI/BIOS settings from within the operating system and adjust the boot order. You have the option of booting from either a USB device or a DVD drive. If you’re installing from scratch or upgrading from an ISO, this will come in useful. Users of Windows 11 must use the Win+I keys to access SettingsSystem Recovery and then click on the Restart now icon next to Advanced Startup. Users of Windows 10 should go to SettingsUpdateSecurityRecoveryAdvanced Startup and select Restart immediately from the drop-down menu.

  • Booting Windows from a device or disk (such as a USB drive or DVD) is known as a bootloader. Modify the Firmware Configuration of your computer
  • Configure the Windows Start-up preferences
  • Windows may be restored from a System Image.

Using a device or disk (such as a USB drive or DVD), you may start Windows. Modify the Firmware Configuration of your computer. Make changes to the Windows startup options. Use a System Image to restore Windows from a backup.

  • Toggle to the Boot Tab. Here you will findBoot Priority, which will list the hard drive, CD/DVD ROM, and USB drive, if any, that has been attached
  • You may adjust the order by pressing the arrow keys or the +– key on your keyboard. Save your work and then exit

When you power up your computer, it will now follow the boot sequence that you have specified in your BIOS or UEFI Firmware Settings. The ability to boot from a DVD drive that has the Windows 11/10 installation files, or from a secondary hard disk that contains another operating system, comes in handy in a variety of situations. A word of caution: It appears that if you have a Bluetooth keyboard, it will not operate in this situation. To access and adjust the choices, you will need a keyboard that is hard-wired to the computer.

  • Change the date and time when the list of operating systems is shown.
  • Anand Khanse is the administrator of
  • Please read the whole topic and all of the comments before making any changes to your system.
  • When installing freeware, be cautious of any third-party offers that may appear.

How to replace the main Windows boot drive in your PC

Things break and slow down in computers as they age. Similarly, every year, newer, quicker, and stronger parts are introduced to the market. The same is true for laptops and tablets as well as desktop computers; even in today’s world of thin and light Ultrabooks, there are still parts that can be changed. Assume that you have a primary Windows boot disk on your computer. It is critical to the operation of your computer, and if it fails, you will be in a difficult situation. Whatever the reason for replacing it, or if you simply desire something better, the procedure is the same either way.

A replacement drive

When it comes to non-volatile memory express (NVMe) drives, the Samsung 960 Evo is our top pick if your computer has the capability. Although it is not Samsung’s fastest consumer drive, the price differential (about $60 on the 500GB variants) compared to the 960 Pro, along with a not-significant performance gap, allows it to take the top spot in our rankings. Available in capacities ranging from 250GB to 1TB and with prices starting at a very affordable $125 for the 250GB model. Visit Amazon to learn more.

If your present PC is only equipped with a mechanical hard-disk drive (HDD), and it is on this drive that your Windows installation is stored, now is an excellent time to consider upgrading to a solid-state drive (SSD).

With a price of $150 for 500GB, the Samsung 860 Evoiis an excellent pick.

It is possible to get away with a smaller boot disk if you have numerous hard drives in your computer, but anything fewer than 250GB would be a bad idea for me.

However, when it comes to your Windows boot disk, always go for an SSD if possible. You will not be disappointed. More: How to verify whether your boot disk has failed using the BIOS or UEFI settings on your computer

Removing the old drive and installing the new one

The specifics of this procedure will differ based on the type of computer you’re using. For example, a desktop tower will be extremely different from a laptop, which will be very different from a small-form-factor PC, and so on. The fundamental processes are largely the same, but the locations of the drives will differ, as will the items that must be removed from your PC in order to access the disk. When it comes to PCs, it’s a good idea to have a simple toolbox on available as well as an amagnetic tray if you have one because the screws are so small.

How to make the HP Omen 15 more powerful

Reinstalling Windows 10

The reinstallation of Windows 10 is perhaps the most scary aspect of this procedure, but it is still not that difficult. Everything hinges on your ability to obtain an image of the operating system, and the most convenient method of doing so is to download it using a PC. If your primary drive fails and you don’t have a backup computer, you should seek assistance from someone, no matter how ridiculous the situation appears. All you need is a computer and an internet connection to complete this task.

The Microsoft Media Creation Tool, which is referred to in the tutorial below, is the quickest and most convenient method of accomplishing this.

It’s a good idea to remember to change it back once you’ve finished installing Windows; otherwise, if you leave a USB drive attached to your PC, it will attempt to boot from that drive, which is not recommended.

It is fairly simple to install Windows from the USB drive, and the on-screen instructions will guide you through the process at every level.

More information about performing a clean installation of Windows 10 may be found in the tutorial provided below.

Simply said, that’s all there is to it.

If you make a purchase after clicking on one of our links, we may receive a commission.

Leave a Comment

Your email address will not be published. Required fields are marked *