How To Change Computer Password Windows 10

Contents

Change or reset your Windows password

If you forgot or lost your password for Windows 10, Windows 8.1, or Windows 7, you may be able to change or reset it. To get started, choose your version of Windows from the tabs below.

If you already know your current password and want to change it

Depending on your operating system, you may be able to update or reset your password for Windows 10, Windows 8.1, and Windows 7. To get started, select your Windows operating system from the drop-down menus below.

Reset your Windows 11 local account password

If you’ve forgotten or misplaced your Windows 11 password for a local account and need to sign back in to your device, the alternatives listed below may be able to assist you in getting back online. More information on the differences between local standard accounts and administrative accounts can be found at Create a local user or administrator account in Windows.

Windows 11

If you included security questions when you set up your local account for Windows 11, you will need to answer security questions in order to login back in to your account. After you’ve made a clumsy attempt to input your password:

  1. On the sign-in screen, click theReset passwordlink to reset your password. If you prefer to use a PIN, check the section on PIN sign-in concerns. If you’re using a work device that’s connected to a network, you may not be able to access the password or PIN reset feature. In that situation, you should contact your system administrator. Keep in mind that if you don’t see any security questions after selecting theReset passwordlink, make sure that the name of your device is different from the name of your local user account (the name you see when you sign in). The device name may be found by right-clicking on Start, selecting System, and then scrolling down to the Device specs section. To rename your PC if its name is identical to your account name, establish a new administrator account and sign in as an administrator (when seeing your device name, you have the option to rename it as well)
  2. Answer the security questions you’ve been asked
  3. Replace your current password with a new one. Use the new password to sign in as you normally would

Reset your Microsoft account password you use to sign in to your computer

If your Microsoft account name is not already visible on the sign-in page, put it in the appropriate field. You should select the account you wish to reset if there are numerous accounts on the machine. SelectI forgot my password from the drop-down menu underneath the password text field. To reset your password, just follow the on-screen instructions. Visit Forgot your Microsoft account password? for further information.

Troubleshoot problems signing in

If your Microsoft account name isn’t already visible on the sign-in screen, key it in manually. Identify the account you wish to reset if you have several accounts on the computer. The option “I forgot my password” is located underneath the password input field. To reset your password, simply follow the steps below. Visit Forgot your Microsoft account password? for further information.

If you already know your current password and want to change it

Select the StartSettingsAccountsSign-in choices from the drop-down menu. UnderPassword, click on theChangebutton and follow the on-screen instructions.

Reset your Windows 10 local account password

In the event that you’ve forgotten or misplaced your Windows 10 password for a local account and need to sign back in to your device, the alternatives listed below may be of assistance to you. For additional information on the differences between local standard accounts and administrative accounts in Windows 10, see Create a local user or administrator account in Windows 10.

Windows 10 version 1803 and later

If you included security questions when you created your Windows 10 local account, then you have at least version 1803 and may sign back in by answering security questions again. After you’ve made a clumsy attempt to input your password:

  1. On the sign-in screen, click theReset passwordlink to reset your password. If you prefer to use a PIN, check the section on PIN sign-in concerns. If you’re using a work device that’s connected to a network, you may not be able to access the password or PIN reset feature. In that situation, you should contact your system administrator. Keep in mind that if you don’t see any security questions after selecting theReset passwordlink, make sure that the name of your device is different from the name of your local user account (the name you see when you sign in). Click Start on the taskbar, then pick System from the context menu. Scroll down to the Device specs section to see your device name. To rename your PC if its name is identical to your account name, establish a new administrator account and sign in as an administrator (when seeing your device name, you have the option to rename it as well)
  2. Answer the security questions you’ve been asked
  3. Type in a new password
  4. Sign in as normal using the new password
  5. And

Windows 10 before version 1803

Because there are no security questions for versions of Windows 10 before to 1803, local account passwords cannot be reset for certain versions of Windows 10. You can reset your device to allow you to pick a new password; but, doing so will result in the deletion of all of your data, apps, and settings.

If you’ve made a backup of your files, you’ll be able to recover any files that have been destroyed. For further information, see Windows 10’s recovery options (in English). To do a factory reset on your device, which will erase all data, applications, and settings:

  1. Continue to hold the Shift key down while selecting thePowerbuttonRestartin the lower-right corner of the screen
  2. When you get to the Choose an option screen, choose TroubleshootReset this PC. SelectRemoveeverything

Warning: Resetting your device will erase all of the data, programs, and settings on it forever!

Reset your Microsoft account password you use to sign in to your computer

If your Microsoft account name is not already visible on the sign-in page, put it in the appropriate field. You should select the account you wish to reset if there are numerous accounts on the machine. SelectI forgot my password from the drop-down menu underneath the password text field. To reset your password, just follow the on-screen instructions. Visit Forgot your Microsoft account password? for further information.

Troubleshoot problems signing in

You can find other solutions under Troubleshoot difficulties logging into your account if you’re still experiencing trouble signing in.

Reset your password

If you’ve lost your Windows 8.1 password, there are a number of options for recovering or resetting your password:

  • If your computer is part of a domain, your system administrator will need to reset your password. If you have a Microsoft account, you may reset your password on the Microsoft website. How to Reset Your Microsoft Account Password. If you’re using a local account, you can use your password suggestion as a reminder
  • Otherwise, you can use your password.

If you are still unable to sign in, you will need to reinstall Windows. For further information about Windows RT 8.1, please contact your PC manufacturer.

More help with passwords in Windows 8.1

If you have forgotten or lost your password, use the instructions in the section Reset your passwordabove to reset or recover it. Our team can assist you if you suspect that your Microsoft account password has been hacked or stolen by someone with bad intentions. See this page for further information. Any time you have trouble signing into your Microsoft Account. Yes, if you’re only logging in to your local PC and nothing else. While we encourage you to use a strong password to protect your computer, we do not advocate it.

  1. If you wish to sign in to Windows using your Microsoft account, you must first create a password.
  2. Is it possible to log into Windows without using a password?
  3. Uppercase and lowercase letters, numerals, and symbols or spaces are all used in more secure passwords than their weaker counterparts.
  4. It shouldn’t contain a whole word or easily discoverable information such as your true name, your user name, or your birth date, for example.
  5. More information about Microsoft accounts may be found at Create a user account.
  6. If your computer is not already linked to a domain, take these steps to connect it:
  1. Take a swipe in from the right side of the screen and tapSettings, followed by the option to Change PC settings. Use your mouse to navigate to the lower-right corner of your screen, then slide the mouse cursor up to the Settings menu, followed by the Change PC settings option. Accounts may be accessed by tapping or clicking on it, followed by Sign-in choices. Change your password by tapping or clicking on it and following the on-screen instructions.

If your PC is connected to a domain, your system administrator may be in charge of determining how regularly you must update your password to protect your account information. To do so, select one of the options from the list below:

  • To change your password, hit Ctrl + Alt + Delete on your keyboard, then touch or clickChange a password and follow the on-screen instructions. You can use a tablet to change your password by holding down the Windows button while also pressing the power button, and then tapping or clickingChange a password and following the on-screen instructions.

It all relies on whether or not you’re using a third-party email account to sign up. The password for your Microsoft account is the same as the password for the email service that you use if your email address ends inoutlook.com,hotmail.com,live.com, or any other Microsoft service. If you change the password for your Microsoft account, the password for that email service is also changed. However, you may use any email address for your Microsoft account, even one that is associated with a third-party web-based mail service like as Google Mail or Yahoo!

Mail, if you so choose. A Microsoft account password does not affect the password you would need to use to sign in to web mail on a third-party website when you change your Microsoft account password. Create a picture password that allows you to sign in with gestures rather than typing in text.

  1. Take a swipe in from the right side of the screen and tapSettings, followed by the option to Change PC settings. (If you’re using a mouse, drag the mouse pointer to the lower-right corner of the screen, clickSettings, and then clickChange PC settings.)
  2. Accounts may be accessed by tapping or clicking on it, followed by Sign-in choices. Select Add from the drop-down menu next to Picture password, and then follow the on-screen instructions.

You should choose a password for your user account that you will be able to remember easily since this is critical. Because you’re going to require it again later on! It goes without saying that you should write down your password and keep it somewhere safe. It’s probably not a good idea to have something taped to the underside of your laptop or the inside of your desk drawer, though. If you do decide to write down your password, make sure to store it separate from your computer. Use various passwords for different tasks to increase the level of protection.

Despite the fact that you may have forgotten or lost your password, there are still a number of options available to you for resetting or recovering it.

To reset or recover your password, click on the Reset your password link above.

Reset your password

Depending on whether your machine is part of a domain or a workgroup, the procedures to reset your password will be slightly different. In the event that your computer is connected to a work or school network, there is a significant probability it is part of a domain. Almost definitely, this machine is part of a workgroup if it is a home computer.

My computer is on a domain

  1. Sign in using a domain account that has administrator capabilities on the device you’re trying to access. If you’re not sure, ask for assistance from your organization’s IT administrator. Select the Start button, Control Panel, User Accounts, User Accounts, and then Manage User Accounts from the drop-down menu. You must input the administrator password or confirm your identity if you are requested for an administrator password or confirmation. The user account name may be found underUsers for this machine on the Users tab, where it can be selected and the password reset button can be found
  2. The new password must be entered, and the new password must be confirmed before selecting OK.

Please keep in mind that if you are signed in as an administrator, you have the ability to create and change passwords for all user accounts on the system. A word of caution: If you use an administrator account to change the password of another account, any encrypted files or e-mail messages associated with that other account will no longer be available to the person who was previously logged into that account.

You might be interested:  How To Remove Microsoft Account From Windows 10

My computer is in a workgroup

  1. When you attempt to log in with the incorrect password, Windows shows a notification stating that the password was entered incorrectly. To close the message, use the OK button. SelectReset password, and then insert the password reset disk or USB flash drive into the computer. To establish a new password, just follow the instructions in the Password Reset wizard. Enter your new password to access the site. If you forget your password again, you can use the same password reset CD to recover your account information. You are not need to create a new one.

Change your password

  1. Using the shortcut keysCtrl + Alt + Delete, selectChange a password
  2. Input your old password first, followed by the new password in the space provided, and then type the new password again to confirm it. PressEnter

Related articles

Microsoft account passwords can be reset if they are forgotten. Change the password for your Microsoft account. Reset the password for your Windows local account.

Reset your Windows local account password

To change the password on your local account, follow the steps outlined in this article. Your local account allows you to sign in on your device while it is not connected to the internet, but it does not link to your other devices. We recommend that you sign in with your Microsoft account in order to use services such as Outlook, Skype, and OneDrive on any of your devices for a more comprehensive experience. If you have forgotten your Windows 11 password, the quickest and most convenient option to regain access to your account is to reset your Microsoft account password.

If you included security questions when you set up your local account for Windows 11, you will need to answer security questions in order to login back in to your account.

  1. On the sign-in screen, click theReset passwordlink to reset your password. If you prefer to use a PIN, check the section on PIN sign-in concerns. If you’re using a work device that’s connected to a network, you may not be able to access the password or PIN reset feature. If this is the case, contact your system administrator. Answer the security questions you’ve been asked
  2. Replace your current password with a new one. Use the new password to sign in as you normally would

To change the password on your local account, follow the steps outlined in this article. Your local account allows you to sign in on your device while it is not connected to the internet, but it does not link to your other devices. We recommend that you sign in with your Microsoft account in order to use services such as Outlook, Skype, and OneDrive on any of your devices for a more comprehensive experience. If you have forgotten your Windows 10 password, the quickest and most convenient option to regain access to your account is to reset your Microsoft account password.

After you’ve made a clumsy attempt to input your password:

  1. On the sign-in screen, click theReset passwordlink to reset your password. If you prefer to use a PIN, check the section on PIN sign-in concerns. If you’re using a work device that’s connected to a network, you may not be able to access the password or PIN reset feature. If this is the case, contact your system administrator. Answer the security questions you’ve been asked
  2. Replace your current password with a new one. Use the new password to sign in as you normally would

Reset the password for the local account in Windows 10 prior to version 1803. Because there are no security questions for versions of Windows 10 before to 1803, local account passwords cannot be reset for certain versions of Windows 10. You can reset your device to allow you to pick a new password; but, doing so will result in the deletion of all of your data, apps, and settings. If you’ve made a backup of your files, you’ll be able to recover any files that have been destroyed. For further information, check the section on Windows’ recovery options.

  1. Continue to hold the Shift key down while selecting thePowerbuttonRestartin the lower-right corner of the screen
  2. When you get to the Choose an option screen, choose TroubleshootReset this PC. SelectRemove everything from the list

How to change or reset your password on Windows 10, for a local or Microsoft account

  • On Windows 10, you may change your password in Settings or by pressing the Control + Alt + Delete keys together. Additionally, if you forget your Windows 10 password, you may reset it. Use of a Microsoft account password is possible
  • You may modify or reset your password on the Microsoft website
  • More stories may be found in Insider’s Tech Reference collection
  • Click here.

Strong passwords on your computer are vitally crucial for the security of your information. Although it is recommended that you change your password on a regular basis, it is possible to forget your password at any moment. In this article, we’ll show you how to both update your Windows 10 password and restore your account if you’ve forgotten your password.

Changing your password on Windows 10

Windows 10 has the option of selecting between two alternative account types: a Microsoft Account and a locally created account. Microsoft accounts are required to have internet access, and they allow you to log into multiple computers with the same credentials. They also grant you access to the Microsoft Store and other Microsoft services. Local accounts, on the other hand, are exclusive to a single machine. Changing the password of a local account has no effect on the operation of any other services.

How to change a Microsoft Account password

1.Log into your account at account.microsoft.com from any device. 2.ClickSecurity. To update your Microsoft account’s password, go to the “Security” section of the account’s settings. Kyle Wilson is an American football player who plays for the Los Angeles Lakers. 3.Click on theChange passwordor on thePassword securitytile to finish the 2-factor authentication stage by completing the password change. The date of your last password change will be displayed when you click on the change password button.

4.Enter your existing password in the appropriate field.

There must be two attempts at entering the new one in order to ensure that there were no typographical errors.

How to change a Windows 10 local account password

1.Go to the bottom left corner of your screen and click on the Windows button to open it. 2.Click on theSettingsgear symbol on the toolbar. 3.Select Accounts from the drop-down menu. 4.On the left-hand side of the window, select the Sign-in choices option. In the Accounts settings section, click on the “Sign-in choices” tab to access the password management section. Kyle Wilson is an American football player who plays for the Los Angeles Lakers. 5.Click on the Password button. 6.ClickChange. When you click on “Password,” the tile will expand to reveal the “Change” button.

Kyle Wilson is an American football player who plays for the Los Angeles Lakers. 7. Please start by entering your current password, followed by the new password that you wish to create. There must be two attempts at entering the new one in order to ensure that there were no typographical errors.

Reset your Windows 10 password if you forgot it

If you have a Microsoft account or a local account on Windows 10, you may also reset your password there.

How to reset Microsoft account password

Account.microsoft.com may be accessed from any other device. 2.ClickSign-in. 3.Input your account’s email address and click on the Next button. 4.Click on “Forgot your password?” When you don’t remember your current password, you may use the “Forgot Password?” option to have your account password changed. Kyle Wilson is an American football player who plays for the Los Angeles Lakers. 5.Confirm your identification by following the on-screen instructions. 6.Input a new password if necessary. There must be two attempts at entering the new one in order to ensure that there were no typographical errors.

Your password has been reset to the one you entered in the previous step, and you can now sign in as you normally would.

How to reset Windows 10 local account password

When you have entered a password and received a message stating that it is wrong, click on thereset passwordlink that appears below the password field, right under your password hint. 2.In the Password Reset Wizard that displays, answer the security questions that are shown to you. 3.After you have properly answered the security questions, you will be required to create a new password for your account. A local account password cannot be changed prior to Windows 10 version 1803, unless another user of the machine knows their password and is also a local administrator.

If an administrator has access to your account, they will be able to reset your password for you.

A native of British Columbia, Canada, Kyle Wilson works as an editor for the Reference department.

He also appears as a guest co-host of the Saturday tech show “Tech Talk” on the iHeartRadio station CFAX-1070, which airs on a regular basis.

South Dakota School of Mines and Technology

Log in to any school-owned computer while on the South Dakota Mines campus to complete your assignment. If you are connecting to the Internet through wireless, make sure you are connected to thesdsmtwpawireless network or, if you are off campus, connect to thecampus VPN before proceeding.

To Change Your Password on Campus-Owned Windows Devices

  1. Make use of your computer’s keyboard by pressing the ctrl-alt-del buttons at the same time
  2. Select theChange Passwordoption that appears on the screen
  3. Then click OK. The Change Password dialog box will open. Click OK to close it. Put in both your current password and your new password, then hit enter twice.
  • Important: Please keep in mind that campus passwords for professors and staff must be at least 8 characters in length, cannot be too similar to a prior password, and must contain three or four of the following elements: lowercase, uppercase, number, and symbol are all acceptable.
  1. Change your password by clicking on the arrow button next to the last password box
  2. This should be done automatically. Make a point of logging out/signing out of your computer and logging back in to ensure that your password change is effective.

You should contact the Information Technology Services Help Desk if you are having problems logging into your account or if you are having trouble changing your password (394-1234).

How to Reset a Forgotten Windows 10 Password

PCMag editors choose and review products in an unbiased manner. If you make a purchase after clicking on one of our affiliate links, we may receive a commission, which helps us to continue our testing. Did you forget the password for your Windows 10 PC? It doesn’t matter whether you’re using a Microsoft Account or a local account; you can change it.

Don’t be concerned; Windows 10 allows you to reset a forgotten password regardless of whether you are logged in with a Microsoft Account or a local account.

However, in order to create a local account, you must first create a few security questions and answers.

Beyond using a password, you should enable a backup authentication method of signing into Windows.

But at some point you may still need to sign in with your password. No matter how careful you are, there may come a day when you’re locked out of Windows because you can’t remember your password. Here’s how to get in.

Microsoft Account Recovery

For those of you who use a Microsoft Account and have forgotten your password, you may access the I forgot my password option on the Windows 10 sign-in screen. After that, you must confirm your email address and select the method through which you desire to get your verification code. Click Obtain the code, and then check your email or text messages for the code to confirm receipt. Fill in the required information in the corresponding field and click Next. Change the password associated with your Microsoft Account.

If the password has been updated, Windows will confirm that it has been changed.

Local Account Recovery

Even though Microsoft has made it increasingly difficult to enter into Windows using a local account, doing so is still doable. If you have one, you should set up the security questions that will allow you to retrieve your account if you lose access to it. In Windows, navigate to SettingsAccountsSign-in choices and select the appropriate option. Password can be found under theManage how you sign in to your devicesection. After that, pick theUpdate your security questions link from the drop-down menu.

  1. Alternatively, you can press the Enter key if you forget your password by clicking on the arrow next to the password field.
  2. After clicking OK, select Reset password from the drop-down menu.
  3. The Windows operating system invites you to generate a new password.
  4. For professional tips on how to get the most out of your technology, subscribe to the TipsTricks newsletter.
Like What You’re Reading?

Sign up for theTipsTricksnewsletter to receive professional tips on how to make the most of your technology. This newsletter may include advertisements, special offers, or affiliate connections to third-party websites. By subscribing to a newsletter, you are indicating your acceptance of our Terms of Service and Privacy Policy. You have the option of unsubscribing from the newsletters at any point.

Manage Google passwords on a Windows 10 device

Depending on your administrator’s settings, your Google and Windows passwords on your managed Microsoft Windows 10 machine may be synchronized. You must first update your Google Account password before you can change or reset the password on your device.

If the following methods do not work, contact your system administrator to have your password changed or reset. Please keep in mind that you cannot change your password to a PIN or fingerprint recognition.

Change your password

Because your Windows password is synced with your Google Account, it is your Google password that must be changed, rather than your Windows password. Resetting your password via theCtrl + Alt + Deletescreen on your device is only possible with the assistance of an administrator.

  1. Access your Windows 10 device by logging in. Go to the Google Account Settings page. It is possible that you may be required to sign in. SelectSigning in to Google from theSecuritytab, then choosePassword from the drop-down menu. It’s possible that you’ll have to sign in again. Change your password by entering your new one and selectingChange Password. Protect your Windows 10 device by locking it. Start your user account by clicking the Startyour user symbol in the lower left corner. Lock
  2. Select your account name from the drop-down menu in the bottom left. As soon as you’re asked, type in your new password

Reset a forgotten password

Your Windows password is synced with your Google Account, and as a result, you must change your Google password as well.

  • To add a work account on your Windows device, go to the bottom left of your sign-in page and select Add Work Account. If you already have a Windows profile in Active Directory, select it from the drop-down menu
  • Otherwise, select Other Account if you don’t see your profile.
  1. After you have entered your email address, click Next. To reset your password, click Forgot Password. To reset your password, just follow the on-screen instructions.

Your Windows account is automatically logged in when you finish the procedures to reset your password. Incorporated trademarks of Google LLC include the terms “Google,” “Google Workspace,” and “Google Drive.” All other company and product names are trademarks of the respective firms with which they are linked, unless otherwise stated. Was this information useful? What can we do to make it better?

You might be interested:  How To Reset Windows 10 To Factory Settings

How to log in when you forgot your Windows password

If your PC or laptop doesn’t have a fingerprint sensor or camera that supports Windows Hello, you’re most likely still logging in using a password or PIN to protect your privacy. Because Microsoft pushed many users to convert to using a Microsoft login rather than a local login, it’s simpler to lose track of the most recent password because you’re likely to change it more frequently as a result. Take note, however, that the firm now allows users to completely eliminate the need for a password by utilizing its authenticator app (as well as other methods) so that you don’t have to remember anything at all.

  • Whatever the case, everything is not lost.
  • You will be able to access a personal computer that has been locked out by following the steps outlined in this guide.
  • To begin, double-check that you haven’t mistakenly hit the Caps Lock key on your computer keyboard.
  • Because passwords are case-sensitive, it will not be recognized by the system.

Reset your Windows 10 password

If you log into Windows 10 with a Microsoft account, you’re in luck. If not, you’re out of luck. If you have forgotten your password, you can quickly recover your account by visiting theRecover your account page and following the on-screen steps to reset it. Once everything is completed, you may log into Windows with the newly created password that you just created.

Local account

Despite the fact that you are utilizing a local account on your laptop or PC, there may still be hope. Your machine must be running Windows 10 version 1803 or later in order to be compatible. Due to the fact that it is so ancient, there is a significant probability that it will contain this version (or newer). You will, however, be required to set up security questions that will be asked if you forget your password in the case that you do. Consequently, if you did include security questions, you should see a Reset password link on the sign-in page for Windows 10.

  • If you’ve forgotten your password as well, you’ll need to go through the process of recovering it.
  • You should now be able to see the security questions that you set up when you created your local Windows 10 account for the first time.
  • By heading to StartSettingsAccountsSign-in options, you may now sign into Windows and pick a new PIN code (if you have forgotten your previous one).
  • Unfortunately, if you do not see any security questions, you will be unable to proceed.
  • It is not feasible to recover a lost password, and the only alternative available to you is to reinstall Windows from scratch.
  • Windows 10 will revert to the state it was in when you originally purchased the laptop or computer.

If you find yourself in this terrible situation, here’s how to restore Windows 10 to its factory settings:

  1. While holding down the Shift key, click on the Power button in the bottom-right corner of the Windows login screen and then pick Restart. Select Troubleshoot from the Choose an option menu when you see the Choose an option screen. Then select Reset this PC from the menu. On the following page, select ‘Remove everything’ because other forms of password resets will not remove the password that you can’t remember

We have a number of other Windows 10 password-related lessons available. Here’s how to create a temporary password, alter the password of another user, or erase the password entirely. The following recommendations may be of use to people who are still running earlier versions of Windows.

Use the hidden administrator account (Windows 7 and older)

You may find further Windows 10 password-related lessons here. Set a temporary password, update the password of another user, or completely erase a password by following the steps outlined above. The following advice may be of use to individuals who are still running earlier versions of Windows:

  1. Start up (or restart) your computer and continually click the F8 key
  2. Select Safe Mode from the drop-down option that opens. Make a note of the capital A in “Administrator” for the Username and leave the password field blank
  3. You should be logged into safe mode at this point. Select User Accounts from the Control Panel menu. Choose the account for which you wish to reset the password
  4. Passwords should be changed.

Following that, here’s how to set Windows to automatically sign in and not prompt you for a password anymore.

Use the Windows boot disc or USB drive

If you can locate a Windows DVD or bootable USB stick with Windows installed on it, you may be able to utilize the command prompt to re-enable a previously deactivated administrator account on your computer. Another option is to switch on your computer and then hold down the power button for four seconds to turn it off. This will force Windows to execute startup recovery. The next time you boot it up, Windows should present you with a boot menu that includes the option to launch Startup Repair.

  1. Search for a drop-down menu labeled “View problem information” once it has completed its task.
  2. This opens a text file in your browser.
  3. FileOpen may be found at the very top of the window.
  4. Find the file sethc by scrolling down the page.
  5. Rename sethc by selecting it from the context menu.
  6. It makes no difference which.
  7. Continue to the bottom of the page and right-click on cmd (the command prompt).

This will generate a copy of the file, which you should rename sethc, exactly as you did with the original sethc file previously.

Your computer will automatically shut down.

Five times, hold down the Shift key.

Net user is a type of person.

Consider the following scenario: your user account is named Jim.

If you don’t want one, simply hit Enter to generate a new password with no characters. You’ll be prompted to put your password in again to ensure that it’s correct. The Command Prompt window should now be closed, and you should be able to connect into the user account with the new password.

Use a password reset utility

You may also try downloading a tool that purports to be able to crack or bypass the Windows password if none of the other methods work. Remember that the use of these for anything other than restoring personal files on your own computer is not permitted by us at this time. Searching for ‘Windows password reset tool’ on the internet will provide several results, one of which is simply named NTpasswd and is well worth your time to check out.

Author: Jim Martin, Editor

More than two decades have elapsed since Jim began testing and reviewing items. His primary areas of expertise include VPN services, antivirus software, and web hosting. He also writes on electric bikes, dashboard cameras, and smart home technology.

Change your Apple ID password

To update your Apple ID password, follow the procedures outlined below.

On your iPhone, iPad, iPod touch, or Apple Watch

  1. Choose System Preferences from the Apple menu, then click Apple ID
  2. Click PasswordSecurity
  3. And then click Change Password. The Apple ID password reset process will require you to input the password that you use to unlock your Mac before it can be completed

Learn more about passwords and your Apple ID

Your Apple ID is the username and password that you use to log into Apple services such as the App Store, Apple Music, iCloud, iMessage, FaceTime, and others. When creating a new password, keep the following considerations in mind:

  • It is required that your new Apple ID password comprise at least eight characters, including a number, an uppercase letter, and a lowercase letter
  • Use of spaces, the same character more than three times in a row, your Apple ID, or a password that you’ve used in the previous year are all prohibited:

Learn more about the password requirements as well as how to keep your Apple ID safe and protected. Despite its popularity, FaceTime is not available in all nations or all regions. Date of Publication:

Password Generator

TOOL FOR GENERATING PASSWORDS

Use our online password generator to instantly create a secure, random password.

Passwords pose a significant security risk. According to a recent survey, weak or stolen passwords are responsible for more than 80% of all hacking-related breaches. In order to protect your personal information and assets, generating strong passwords is an important first step. The LastPass Password Generator can be of use in this situation. Passwords that are nearly impossible to crack contain a variety of different sorts of characters (numbers, letters, and symbols). Making your passwords unique for each website or service you use also helps to protect you from hacking attempts.

We never send the passwords you create to anybody else over the internet.

The best password tips from the pros

  1. Always be sure that each account you create has a unique password. The problem of reusing passwords is that, as soon as one website has a security breach, hackers will have a very simple time attempting the same login and password combination on other websites. Make sure that your passwords do not contain any personally sensitive information. However, while names, birthdays, and street addresses are simple to remember, they’re also easy to find online, and hence should always be avoided when creating passwords to maintain the best level of security. Make sure your passwords are at least 12 characters in length and contain letters, digits, and special characters to avoid being compromised. Some people like to develop passwords that are 14 or 20 characters in length
  2. Others prefer passwords that are shorter. Using words or lyrics from your favorite movie or song might help you create a master password that you’ll be able to remember easily. Simply insert random characters, but do not replace them with characters from well-known patterns. To keep track of your passwords, use a password manager such as LastPass. We keep your information safe from assaults or spying
  3. But, we cannot guarantee complete protection. Avoid using passwords that are easy to guess, such as asd123, password1, or Temp! The following are some samples of strong passwords: S 2x4S12nLS1*, [email protected] s$, 49915w5$oYmH, and others. As an alternative, use LastPass to build a new “password” and save it as the answer to your security questions. This will prevent you from utilizing personal information for these questions. What is the explanation behind this? Some of this information, such as the name of the neighborhood you grew up on or your mother’s maiden name, is easily discovered by hackers and may be used in a brute-force assault to get access to your accounts
  4. However, other information, such as your social security number, is more difficult to find. Avoid using passwords that are almost identical yet differ just by a single word or letter. This technique compromises the security of your account across various websites. Whenever you have a good cause to do so, such as after you’ve shared your passwords with someone, after a website has been compromised, or if it’s been more than a year since you last rotated your passwords, do so. Share your passwords with others only in person, never by email or text message. The most safe method of sharing is through the use of a service such as LastPass, which allows you to share a secret password and even withdraw access when the time comes.

Why you need a built-in password generator

Reduce the amount of time you spend on your computer by using a strong password generator that is built into your browser or an app on your phone. LastPass can generate safe passwords for you as soon as you join up – and then remember all of them for you as well. Take a look at how LastPass works.

Get total password peace-of-mind

Reduce the amount of time you spend on your computer by using a strong password generator that is incorporated into your browser or available as an app on your mobile device. The LastPass service can generate strong passwords for you right when you join up – and then it will keep track of them all for you. Take a look at how LastPass functions.

Effortless security

LastPass is accessible from every website where you establish a new account. Create secure passwords for your websites and applications with a single click from the sign-up forms for those websites and apps. LastPass is available for free trial.

Try LastPass for free

Premium is available for a free 30-day trial period.

Get Started

You are switching the operator of your DNS “switchboard” from your Internet service provider to Google Public DNS when you utilize their services. Dynamic Host Configuration Protocol (DHCP) is a protocol that, in the majority of circumstances, automatically configures your system to utilize the IP addresses of your ISP’s domain name servers. Google Public DNS requires that you deliberately modify the DNS settings in your operating system or device to utilize the Google Public DNS IP addresses in order for it to function properly.

We provide broad instructions here that may or may not be applicable to your operating system or device; for authoritative information, visit your vendor’s documentation.

Privacy and security are provided for DNS communications transferred between your device and Google’s DNS servers through the use of this feature.

Important: Before you start

Remember to take a note of the existing server addresses or settings on a piece of paper before you update your DNS settings to use Google Public DNS. It is critical that you maintain these statistics on hand as a backup in case you need to refer back to them at any point in the future. We also recommend that you print this page in case you run into a difficulty and need to go back to these instructions again later on.

Google Public DNS IP addresses

The IPv4 addresses of the Google Public DNS (IPv4) servers are as follows: The IPv6 addresses for the Google Public DNS are as follows: You can use either address as your primary or secondary DNS server, depending on your preferences. You can configure Google Public DNS addresses for IPv4 or IPv6 connections, or for both IPv4 and IPv6 connections. Utilizing Google Public DNS64instead of Google Public DNS IPv6 addresses for IPv6-only networks with NAT64 gateways using the64:ff9b:/96prefix, you may provide connection to IPv4-only services without any additional settings for networks that exclusively utilize IPv6.

Change your DNS servers settings

This is because the instructions change across different operating system releases and versions/releases, thus we only provide one version as an example. If you require special instructions for your operating system or version, please reference the documentation provided by your vendor. You may also look for answers on our user group website if you like. Many systems allow you to designate multiple DNS servers, which are then contacted in the order in which they were specified.

In the following instructions, we will walk you through the process of specifying just the Google Public DNS servers as the primary and secondary servers, ensuring that your configuration appropriately utilizes Google Public DNS in all circumstances.

Windows

The DNS settings for the selected network connection are configured in theTCP/IP Propertieswindow for the selected network connection. Changing the DNS server settings on Windows 10 is one example.

  1. Select Control Panel from the drop-down menu, then Network and InternetNetwork and Sharing CenterChange adapter settings. The connection for which you wish to configure Google Public DNS should be selected. As an illustration:
  • To modify the settings for an Ethernet connection, right-click the Ethernet interface and selectProperties from the context menu. To modify the settings for a wireless connection, right-click the Wi-Fi interface and selectProperties from the context menu.
You might be interested:  How To Turn Off Updates On Windows 10

If you are required for an administrator password or confirmation, enter the password or confirm your identity as appropriate. Select the Networking tab from the drop-down menu. Select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) from the This connection makes use of the following items drop-down menu, and then clickProperties. Select theDNStab from theAdvanced drop-down menu. Any DNS server IP addresses that appear in this window should be written down for future reference and removed from the current window if they exist.

Use the DNS server addresses listed below to configure your system.

You should replace those addresses with the IP addresses of the Google DNS servers, such as this:

  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.

Check to determine if your setup is functioning properly; see Try out your fresh configurations. If you wish to make changes to any other network connections, repeat the procedure as needed.

macOS

The DNS configuration is given in the Networkwindow. For example, with macOS 10.15, you may change the DNS server settings.

  1. Apple menu may be accessed by clicking on it. Internet Protocol (IP) Network Preferences
  2. The lock symbol in the lower left-hand corner of the window should be unlocked before making any changes
  3. If the icon is unlocked, click it to make changes, and when required to authenticate, enter your password. The connection for which you wish to configure Google Public DNS should be selected. As an illustration:
  • Advanced Wi-Fi settings may be changed by selectingWi-Fi and then clickingAdvanced
  • For example, In order to modify the settings for an Ethernet connection, selectBuilt-In Ethernet and then clickAdvanced.

Select the DNStab from the drop-down menu. To change any mentioned addresses with, or to add, the Google IP addresses at the top of the list, simply click on the following link:

  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.

ClickOKApply. Check to determine if your setup is functioning properly; see Try out your fresh configurations. If you wish to make changes to any other network connections, repeat the procedure as needed.

Linux

Network Manager is used to configure DNS settings in most recent Linux distributions, including Debian and Ubuntu. Changing the DNS server settings on Ubuntu, as an illustration.

  1. Select the connection for which you wish to establish Google Public DNS by going to SystemPreferencesNetwork Connections and selecting it. As an illustration:
  • In order to make changes to the settings for an Ethernet connection, pick theWiredtab and then select your network interface from the drop-down menu. It is commonly referred to as eth0. In order to make changes to the settings for a wireless connection, pick theWirelesstab and then the relevant wireless network

Select the IPv4 Settingstab or the IPv6 Settingstab from the drop-down menu that appears when you click Edit. If the specified method is Automatic (DHCP), enter the dropdown menu and choose Only Automatic (DHCP) addresses in place of the other options. Don’t make any changes if the method is already set to anything else. In the DNS servers section, enter the following Google Public DNS IP addresses, separated by a comma:

  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.

To save the modification, selectApply from the menu bar. If you are requested for a password or confirmation, enter the password or confirm your identity as appropriate. Check to see if your configuration is functioning properly; see Check your new settings. If you wish to make changes to any other network connections, repeat the procedure as needed. Your DNS settings are provided in /etc/resolv.conf if your distribution does not utilize Network Manager to manage your DNS settings. Changing the DNS server settings on a Debian server, for example.

  1. /etc/resolv.conf should be edited using sudo vi /etc/resolv.conf
  2. Write down the IP addresses of any nameserverlines that show so that you can refer to them later. Replace the following lines in the nameserverlines with, or add them at the end of the lines: For IPv4: nameserver 8.8.8.8 and nameserver 8.8.4.4, respectively. For IPv6:nameserver 2001:4860:4860:8888, use the following syntax: nameserver 2001:4860:4860:8844 (2001:4860:4860:8844) Instead of the IPv6 addresses listed above, you can use Google Public DNS64 if you are only interested in IPv6. Save the file and quit
  3. Restart any Internet browsers or clients that you are currently using. Check to see if your configuration is functioning properly
  4. See Check your new settings.

Additional setup may be required if you are running DHCP client software that overwrites the values in the /etc/resolv.conf file.

In this case, you will need to update the DHCP client’s configuration file. Consider the following scenario: installing DHCP client software on a Debian server.

  1. Sudo cp /etc/resolv.conf.auto
  2. Back up your /etc/resolv.conf: sudo cp /etc/resolv.conf
  3. Make changes to the configuration file in the directory /etc/DHCP/dhclient.conf (or the equivalent file in the directory /etc/DHCP3/dhclient.conf) by running sudo vi in the directory where the configuration file is located. It is necessary to eliminate any lines that follow the phrase “request with onlydomain-name-servers.” Write down the IP addresses of any domain-name servers that appear in the line containing domain-name servers with IP addresses for future reference. Replace that line with the following one, or put it on top of it: For IPv4:prepend domain-name-servers 8.8.8.8, 8.8.4.4
  4. For IPv6:prepend domain-name-servers 2001:4860:4860:8888, 2001:4860:4860:8844
  5. For IPv7:prepend domain-name-servers 2001:4860:4860:8888, 2001:4860:4860:8844
  6. Instead of the IPv6 addresses listed above, you can use Google Public DNS64 if you are only interested in IPv6. Save the file and quit
  7. Restart any Internet browsers or clients that you are currently using. Check to see if your configuration is functioning properly
  8. See Check your new settings.

Chrome OS

The DNS settings for the selected network connection are configured in theNetworksection of theSettingsmenu for that connection. Changing the DNS server settings on Chrome OS 71, for example.

  1. Go to theSettingsmenu, and then pick the connection for which you wish to establish Google Public DNS under theNetworksection. As an illustration:
  • To make changes to the settings for an Ethernet connection, select theEthernetsection from the drop-down menu. Select the proper network name by clicking on theWi-Fisection of the menu bar
  • To alter the settings for a wireless connection, repeat the process. It is not feasible to change the DNS settings for a mobile data connection that has been created via Instant Tethering. Changing the DNS settings for mobile Wi-Fi hotspots that have been manually configured, on the other hand, is possible by following the instructions for a wireless connection.

For the selected connection, expand theNetworksection in the Navigator. In the Name servers section, you will find the following information:

  • For IPv4: Click on the Google name serversbutton (or, alternatively, click on the Custom name serversbutton and enter the addresses 8.8.8.8 and 8.8.4.4)
  • For IPv6: Click on the Google name serversbutton (or, alternatively, click on the Custom name serversbutton and enter the addresses 8.8.8.8 and 8.8.4.4)
  • For IPv7: Click on the Google name serversbutton (or, alternatively, click on the Custom name serversbutton Custom name servers may be specified for IPv6 by selecting theCustom name serversbutton and entering the following numbers 2001:4860:4860:8888 et 2001:4860:4860:8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.

To make the changes take effect, click outside of theNetworksection. Check to determine if your setup is functioning properly; see Try out your fresh configurations. If you wish to make changes to any other network connections, repeat the procedure as needed.

Routers

Every router has a unique user interface for establishing DNS server settings; we only present a generic technique for configuring DNS server settings. For further information, please refer to the documentation that came with your router. To make changes to your router’s settings, follow these steps:

  1. To access the router’s management dashboard, navigate to the IP address of your router in your browser and type it in. Most routers are built with a default IP address, such as 192.168.0.1, 192.168.1.1, 192.168.2.1, or 192.168.1.100, as the default configuration. If none of these options work or the default gateway address has been changed, look for the default gateway address in the network settings panel of your system. When asked, enter the password to make changes to the network configuration. Locate the screen on which the DNS server configurations are provided
  2. If the IP addresses for the primary and secondary DNS servers are listed in the fields, make a note of them for future reference. Substitute the following IP addresses with the ones provided by Google:
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.

Save your work and depart. Restart your browser to make the changes take effect. Check to determine if your setup is functioning properly; see Try out your fresh configurations. Some routers have distinct fields for each of the eight components of IPv6 addresses and are unable to accept the:IPv6 abbreviation syntax, which is used by some clients. Fill in the blanks with the following information:

  • 2001:4860:4860:0:0:0:8888
  • 2001:4860:4860:0:0:0:8844
  • 2001:4860:4860:0:0:0:8888

If four hex digits are required, increase the number of entries from 0 to 0000.

iOS

The following steps will walk you through the process of changing DNS settings on your iPhone, iPad, or iPod touch.

  1. Choose WiFi from the Settings menu. Then, tap the I symbol next to the Wi-Fi network you wish to modify the DNS servers for. Alternatively, scroll down to the DNS area, tapConfigure DNS, then tapManual and enter the Google IP addresses. You may also choose to delete all of the default DNS servers from the list if you choose.
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844.

The DNS server selected by the Wi-Fi network will be restored if the DNS setting is returned to Automatic.

Android

Google’s Android 9 operating system includes “Private DNS,” which makes use of DNS-over-TLS to ensure the security and privacy of your DNS requests. The next steps will walk you through the process of configuring it.

  1. Open SettingsNetworkInternetAdvancedPrivate DNS
  2. SelectPrivate DNS provider hostname
  3. Enterdns.googleas as the DNS provider’s domain name
  4. And then click Save to finish.

More details may be found in the Android blog article that announced the functionality. Remember that the default option for Private DNS in Android P is “Automatic,” which means that it will utilize the network-specified DNS server and will attempt a TLS connection on port 853 before dropping back to UDP on port 53.

Older Android versions

All networks cannot be configured using private DNS on devices running earlier Android versions than Android 9. DNS-over-TLS is not supported on devices running older Android versions than Android 9. DNS settings may be customized for each unique Wi-Fi network that you use. This method necessitates the manual configuration of all network information and is only advised for sophisticated users.

Mobile or other devices

DNS servers are commonly established in the advanced Wi-Fi settings section of the router. However, because each mobile device has a unique user interface for establishing DNS server settings, we only present a basic approach for configuring DNS server settings. For further information, please refer to the documentation provided by your mobile service provider. To make changes to your mobile device’s settings, follow these steps:

  1. Navigate to the screen where Wi-Fi configurations are provided
  2. Locate the screen on which the DNS server configurations are provided
  3. Make a note of any IP addresses that appear in the fields designated for the primary and secondary DNS servers for future reference
  4. Otherwise, leave them blank. Substitute the following IP addresses with the ones provided by Google:
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.

Save your work and depart.

Check to determine if your setup is functioning properly; see Try out your fresh configurations.

Test your new settings

To ensure that the Google DNS resolver is operational, do the following tests:

  1. Start by entering a valid hostname URL (for example, if it resolves successfully, leave your browser, reload the page and refresh it numerous times to ensure that you aren’t seeing a result from a cached web page.
  • When utilizing Google Public DNS64on an IPv6-only system, perform the preceding test using an IPv4-only hostname URL (such as dns64).

If all of these tests are successful, it means that everything is functioning properly. If this is not the case, go to the next step. Enter a set IP address into your browser’s address bar. As the URL, you can use (points to thetest-ipv6.comwebsite) as an example.

  • The URL should be replaced with/as if you are using Google Public DNS64 on an IPv6-only machine. As a result of failing this test, you do not have access to the reserved prefix64:ff9b/96 or to a NAT64 gateway, and hence you are unable to utilize Google Public DNS64. If you are utilizing an IPv6-only system and do not have access to Google Public DNS64, you should use/as the URL.

If this procedure is successful, restart the page with a newly launched browser to ensure that the page is loaded from the beginning. This indicates that your DNS setup is incorrect; follow the steps above to ensure that everything is configured correctly. If these tests are successful (but step 1 fails), this indicates that your DNS configuration is incorrect. If none of these tests are successful, go to the next step. Make any DNS modifications you made and rerun the tests to ensure that they are successful.

If you have any difficulties after deciding to use Google Public DNS as your resolver, please follow the diagnostic method described below.

Switch back to your old DNS settings

If you had not previously configured any customized DNS servers, you could select the option to enable obtaining DNS server addresses automatically and/or delete the Google IP addresses from the window in which you specified the Google IP addresses. This would allow you to revert to your previous settings if you had not previously configured any customized DNS servers. This will return your settings to the default servers provided by your ISP. When manually specifying IP addresses, follow the processes outlined above to specify the previous IP addresses.

Leave a Comment

Your email address will not be published. Required fields are marked *