How To Change Dns Windows 10

Contents

You can change DNS settings on Windows 10 – here’s how.

Internet Service Providers (ISPs) provide the necessary network settings, such as Domain Name System (DNS) addresses, when you subscribe for internet access for your home or business. These network settings make it possible for you to access your favorite websites, online services that you may require to work from home, and download files. The main drawback is that the DNS servers provided by the ISP are typically sluggish, unstable at times, and not particularly secure. However, if you want to improve your internet experience on Windows 10, you may always utilize other resolvers from third-party firms.

Related: The Cloudflare 1.1.1.1 DNS service on Windows 10 and routers may be configured as follows:

What’s DNS?

If you don’t have a Domain Name System, surfing the internet would be a nightmare without it. Domain Name Systems provide a service (generally at no cost to you) that allows you to key in a friendly domain name in the web browser to load a web page. The problem is that any device connected to a network requires an IP address (104.18.189.55) in order to communicate with other devices on that network. Humans are unable to recall these addresses, therefore DNS servers are responsible for providing the technique for converting friendly domain names (such as WindowsCentral.com) into IP addresses that computers can recognize and comprehend.

When the address is identified, the browser returns to the previous page, after which it connects to the site and downloads the contents of the current page.

The good news is that Windows 10 allows you to alter these settings to whatever services you like if the resolvers you are now using are unreliable, they are slowing down your internet connection, or if you prefer quicker and more private servers.

  • How to modify the DNS settings in Windows 10 using the Control Panel
  • How to modify the DNS settings in Windows 10 using the Settings app
  • How to update the DNS settings in Windows 10 using the Command Prompt

How to change Windows 10 DNS settings using Control Panel

Use the following procedures to modify the DNS settings on Windows 10 using the Control Panel:

  1. Open Control Panel
  2. Select Network and Internet
  3. Select Network and Sharing Center
  4. And then close Control Panel. Click on theChange adapter settingsoption in the left pane of the window
  5. Windows Central is the source of this information. Properties may be accessed by right-clicking the network interface that links Windows 10 to the internet and selecting it from the context menu. Windows Central is the source of this information. a quick hint: If you know which adapter is linked to the network, you will be able to identify it since it will not have a label that says “Disabled” or “Network cable disconnected.” The Internet Protocol Version 4 (TCP/IPv4) option should be selected and checked
  6. To access the properties, click on the Propertiesbutton. Windows Central is the source of this information. Select theUse the following DNS server addresses option from the drop-down menu. Please keep in mind that even if you choose to manually specify the DNS settings, the device will continue to obtain its TCP/IP address from the DHCP server (router). Fill in the blanks with your “preferred” and “alternative” DNS addresses Windows Central is the source of this information. If you wish to utilize Cloudflare, Google Public DNS, or Cisco OpenDNS, you may use the following configuration options:
  • Cloudflare’s public DNS addresses are 1.1.1.1 and 1.0.0.1
  • Google Public DNS addresses are 8.8.8.8 and 8.8.4.4
  • OpenDNS addresses are 208.67.222.222 and 208.67.220.220
  • And others.
  1. (Optional) After clicking on theAdvancedbutton, going to theDNStab, and clicking on theAddbutton, specifying the other DNS server address, and then clicking on theAddbutton. Quick tip: In addition to adding new addresses, you can also update and delete resolvers from this page, and you even have the opportunity to adjust their priority from the sidebar
  2. Click on theOKbutton and then on theClosebutton.

As soon as you have completed the procedures, the device will instantly begin utilizing the DNS settings that you have provided.

How to change Windows 10 DNS settings using Settings

The following procedures should be followed in order to update the DNS addresses using the Settings app:

  1. OpenSettings
  2. Choose Network and Internet
  3. Then Ethernet (or Wi-Fi, depending on your connection)
  4. And then OK. Select the network connection that will allow Windows 10 to connect to the network. Windows Central is the source of this information. Under “IP settings,” select “Edit” from the drop-down menu
  5. Then Windows Central is the source of this information. Make use of the “Edit IP settings” drop-down menu and pick the “Manual” setting
  6. Toggle the IPv4 toggle switch to the on position. Confirm the addresses of your “Preferred DNS” and “Alternate DNS” servers. Windows Central is the source of this information. If you wish to utilize Cloudflare, Google Public DNS, or Cisco OpenDNS, you may use the following configuration options:
  • Cloudflare’s public DNS addresses are 1.1.1.1 and 1.0.0.1
  • Google Public DNS addresses are 8.8.8.8 and 8.8.4.4
  • OpenDNS addresses are 208.67.222.222 and 208.67.220.220
  • And others.

You should now be able to connect to the internet using the new resolvers once you have completed the steps in this guide. We are not including the Settings app as the first choice since it might be confusing for some customers, despite the fact that changing DNS settings on your computer should be the preferable experience.

How to change Windows 10 DNS settings using Command Prompt

As an alternative, you may use the Command Prompt to make changes to the DNS settings on your computer running Windows 10.

The following are the procedures to follow in order to alter the device DNS settings using Command Prompt:

  1. Open the Start menu, type Command Prompt into the search box, right-click the first result, and pick theRun as administrator option
  2. In order to open the program that allows you to update the networking settings, type the following command and press Enter:netsh
  3. To identify the names of the network adapters, type the following command and press Enter to execute it: interface display the interface
  4. The following command will be entered to set the primary DNS IP address: Type the following command to set the primary DNS IP address and press Enter: ip address as an interface DNS name=”ADAPTER-NAME” source=”static,” address “X.X.X.” set to “ADAPTER-NAME” Remember to replace ADAPTER-NAME with the name of the network adapter that you specified in Step No. 4, and X.X.X.X with the IP address of the DNS server that you wish to use in the commands. If you wish to utilize Cloudflare, Google Public DNS, or Cisco OpenDNS, you may use the following configuration options:
  • Cloudflare’s public DNS addresses are 1.1.1.1 and 1.0.0.1
  • Google Public DNS addresses are 8.8.8.8 and 8.8.4.4
  • OpenDNS addresses are 208.67.222.222 and 208.67.220.220
  • And others.
  1. For instance, the following program changes the main DNS address to 1.1.1.1: Source: Windows Central
  2. Interface ip set dns name=”Ethernet1″ source=”static” address=”1.1.1.1″
  3. Source=”static” address=”1.1.1.1″
  4. In order to add an alternate DNS IP address, use the following command and press Enter: interface ip add dns name=”ADAPTER-NAME” addr=”X.X.X.X” index=2 name=”ADAPTER-NAME” addr=”X.X.X.X” index=”2″ Remember to replaceADAPTER-NAMEwith the name of your network adapter that you obtained from step No. 4, and replaceX.X.X.X with the secondary address that you wish to use in the command. The following command, for example, configures the secondary DNS address to be 1.0.0.1: Windows Central provides the command interface ip add dns name=”Ethernet1″ addr=”1.0.0.1″ index=2: Easy-to-remember tip: If you need to add even more DNS addresses, simply repeat the steps above, but raise the number of the index option by one. Interfaceip add dns name=”Ethernet1″ addr=”8.8.8″ index=3
  5. For example, interfaceip add dns index=”3

The new DNS server addresses will be used to translate domain names to numeric addresses that your device can comprehend once you have completed the procedures above.

More Windows 10 resources

More useful information, coverage, and answers to frequently asked concerns regarding Windows 10 may be found at the following websites and resources:

  • Everything you need to know about Windows 10 on Windows Central
  • Help, hints, and tips for using Windows 10
  • Windows 10 discussion boards are available on Windows Central.

How to change DNS server in Windows 10 – Dave’s Computer Repair

When your cable installer or internet service provider sets up your broadband, they also set up a standard DNS provider so that you can get online straight immediately. If your connection is provided by an ISP, the DNS servers operated by the ISP might be utilized. They are adequate in terms of functionality, but they are not necessarily the quickest or most secure. Did you know that you have the ability to modify your DNS server? I’ll show you how to do it. It is not always required to modify your DNS server configuration.

The benefits of a new DNS server include increased speed and, on occasion, increased security.

What is DNS?

Name Service (DNS) is an abbreviation for Domain Name Service, which is the component of networking that converts an IP address of a web server into a URL that you can enter into your web browser. As a result, when you write ‘, the DNS servers search it up in large IP databases, determine the IP address, and then direct your browser to the IP address. DNS is completely invisible to users, and this is done on purpose. We don’t care how we go to the website; all that matters is that we get to the proper website as fast as possible.

Change your DNS server in Windows 10

When using Windows 10, it takes less than a minute to change the DNS server. Here’s how to do it.

  1. Open the Network and Internet Connections section of the Control Panel
  2. Change the adapter settings by selecting Change Adapter Settings. Properties may be accessed by selecting Network Adapter from the context menu. Internet Protocol Version 4 (TCP/IPv4) and Properties are the next options to choose from. Toggle Utilize the following DNS server addresses as well as the following two DNS addresses: When you’re finished, click OK.

You might want to try the following servers:

  • 1.1.1 is the CloudFlare DNS
  • 67.220.220 or 208.67.222.222 is the OpenDNS
  • 8.8.8 or 8.8.4.4 is the Google DNS
  • 200.69.80 or 84.200.7040 is the DNS.Watch
  • 6.64.6 or 64.6.65.6 is the VeriSign Public DNS
  • 1.1.1 is the CloudFlare DNS
  • 1.1.1

Why change DNS server?

I indicated at the beginning of this article that your ISP’s DNS server may not be as quick as one of the servers listed above. However, this will only have a tiny influence on browsing performance and will not cause any noticeable slowdowns. What’s more relevant is the potential security benefits that switching DNS servers might provide. ISPs can now gather information about your internet behavior in any way they see fit. Any DNS query you make, as well as every website you visit that makes use of their DNS server, may be traced.

They have the option of using it for their own marketing purposes or perhaps selling it to other marketing organizations.

It’s a minor move, but it may be a significant one, especially given CloudFlare’s assurance that they would not maintain any logs of your browsing activities.

If you want assistance with updating your DNS settings or resolving any network issues, the computer repair technicians at Dave’s Computers in New Jersey can assist you. If you bring your computer into our store, we will see what we can do for you!

Get Started

You are switching the operator of your DNS “switchboard” from your Internet service provider to Google Public DNS when you utilize their services. Dynamic Host Configuration Protocol (DHCP) is a protocol that, in the majority of circumstances, automatically configures your system to utilize the IP addresses of your ISP’s domain name servers. Google Public DNS requires that you deliberately modify the DNS settings in your operating system or device to utilize the Google Public DNS IP addresses in order for it to function properly.

We provide broad instructions here that may or may not be applicable to your operating system or device; for authoritative information, visit your vendor’s documentation.

You might be interested:  How To Install Texture Packs Minecraft Windows 10

Privacy and security are provided for DNS communications transferred between your device and Google’s DNS servers through the use of this feature.

Important: Before you start

Remember to take a note of the existing server addresses or settings on a piece of paper before you update your DNS settings to use Google Public DNS. It is critical that you maintain these statistics on hand as a backup in case you need to refer back to them at any point in the future. We also recommend that you print this page in case you run into a difficulty and need to go back to these instructions again later on.

Google Public DNS IP addresses

The IPv4 addresses of the Google Public DNS (IPv4) servers are as follows: The IPv6 addresses for the Google Public DNS are as follows: You can use either address as your primary or secondary DNS server. You can configure Google Public DNS addresses for either IPv4 or IPv6 connections, or both. For IPv6-only networks with a NAT64 gateway using the64:ff9b:/96prefix, you can useGoogle Public DNS64instead of Google Public DNS IPv6 addresses, providing connectivity to IPv4-only services without any other configuration.

Change your DNS servers settings

This is because the instructions change across different operating system releases and versions/releases, thus we only provide one version as an example. If you require special instructions for your operating system or version, please reference the documentation provided by your vendor. You may also look for answers on our user group website if you like. Many systems allow you to designate multiple DNS servers, which are then contacted in the order in which they were specified. In the following instructions, we will walk you through the process of specifying just the Google Public DNS servers as the primary and secondary servers, ensuring that your configuration appropriately utilizes Google Public DNS in all circumstances.

Windows

The DNS settings for the selected network connection are configured in theTCP/IP Propertieswindow for the selected network connection.

Changing the DNS server settings on Windows 10 is one example.

  1. Select Control Panel from the drop-down menu, then Network and InternetNetwork and Sharing CenterChange adapter settings. The connection for which you wish to configure Google Public DNS should be selected. As an illustration:
  • To modify the settings for an Ethernet connection, right-click the Ethernet interface and selectProperties from the context menu. To modify the settings for a wireless connection, right-click the Wi-Fi interface and selectProperties from the context menu.
  • You must input the administrator password or confirm your identity if you are requested for an administrator password or confirmation
  • Select the Networking tab from the drop-down menu. Select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) from the This connection makes use of the following elements drop-down menu and then clickProperties. Select theDNStab from theAdvanced drop-down menu. If there are any DNS server IP addresses mentioned there, make a note of them for future reference and close this window
  • Otherwise, close this window. ClickOK
  • Select Make use of the DNS server addresses listed below. In the event that any IP addresses are mentioned in the preferred DNS server or the alternate DNS server, make a note of them for future reference. Please replace the following addresses with the IP addresses of the Google DNS servers:
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.
  1. Check to see if your setup is functioning properly. see Try out your fresh configurations
  2. You should repeat the procedure for any other network connections that you want to modify.

macOS

The DNS configuration is given in the Networkwindow. For example, with macOS 10.15, you may change the DNS server settings.

  1. Apple menu may be accessed by clicking on it. Internet Protocol (IP) Network Preferences
  2. The lock symbol in the lower left-hand corner of the window should be unlocked before making any changes
  3. If the icon is unlocked, click it to make changes, and when required to authenticate, enter your password. The connection for which you wish to configure Google Public DNS should be selected. As an illustration:
  • Advanced Wi-Fi settings may be changed by selectingWi-Fi and then clickingAdvanced
  • For example, In order to modify the settings for an Ethernet connection, selectBuilt-In Ethernet and then clickAdvanced.
  • To change any mentioned addresses with, or to add, the Google IP addresses at the top of the list, go to the DNStab and press +.
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.
  1. ClickOKApply
  2. Check to see if your setup is functioning properly. see Try out your fresh configurations
  3. You should repeat the procedure for any other network connections that you want to modify.

Linux

Network Manager is used to configure DNS settings in most recent Linux distributions, including Debian and Ubuntu. Changing the DNS server settings on Ubuntu, as an illustration.

  1. Select SystemPreferencesNetwork Connections from the drop-down menu. The connection for which you wish to configure Google Public DNS should be selected. As an illustration:
  • In order to make changes to the settings for an Ethernet connection, pick theWiredtab and then select your network interface from the drop-down menu. It is commonly referred to as eth0. In order to make changes to the settings for a wireless connection, pick theWirelesstab and then the relevant wireless network
  • Select the IPv4 Settingstab or the IPv6 Settingstab from the drop-down menu that appears when you click Edit. If the specified method is Automatic (DHCP), enter the dropdown menu and choose Only Automatic (DHCP) addresses in place of the other options. if the method is already set to anything else, do not make any changes
  • Enter the following Google Public DNS IP addresses in the DNS servers box, separated by a comma:
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.
  1. To save the modification, selectApply from the menu bar. If you are requested for a password or confirmation, enter the password or confirm your identity as appropriate. Check to see if your setup is functioning properly. Check out your updated settings and see how they work. You should repeat the procedure for any other network connections that you want to modify.

Save the changes by clickingApply. If you are requested for a password or confirmation, enter the password or confirm your identity as appropriate; Ensure that everything is operating properly by running a test on your configuration. Check out your new settings and see how they work; If you wish to make changes to any other network connections, repeat the process.

  1. To save the modification, clickApply. You must key in the password or give confirmation if you are requested for one. Check to ensure that your setup is functioning properly. seeExamine your new configurations
  2. If you wish to make changes to any other network connections, repeat the procedure.

Additional setup may be required if you are running DHCP client software that overwrites the values in the /etc/resolv.conf file. In this case, you will need to update the DHCP client’s configuration file. Consider the following scenario: installing DHCP client software on a Debian server.

  1. Sudo cp /etc/resolv.conf.auto
  2. Back up your /etc/resolv.conf: sudo cp /etc/resolv.conf
  3. Make changes to the configuration file in the directory /etc/DHCP/dhclient.conf (or the equivalent file in the directory /etc/DHCP3/dhclient.conf) by running sudo vi in the directory where the configuration file is located. It is necessary to eliminate any lines that follow the phrase “request with onlydomain-name-servers.” Write down the IP addresses of any domain-name servers that appear in the line containing domain-name servers with IP addresses for future reference. Replace that line with the following one, or put it on top of it: For IPv4:prepend domain-name-servers 8.8.8.8, 8.8.4.4
  4. For IPv6:prepend domain-name-servers 2001:4860:4860:8888, 2001:4860:4860:8844
  5. For IPv7:prepend domain-name-servers 2001:4860:4860:8888, 2001:4860:4860:8844
  6. Instead of the IPv6 addresses listed above, you can use Google Public DNS64 if you are only interested in IPv6. Save the file and quit
  7. Restart any Internet browsers or clients that you are currently using. Check to see if your configuration is functioning properly
  8. See Check your new settings.

Chrome OS

The DNS settings for the selected network connection are configured in theNetworksection of theSettingsmenu for that connection. Changing the DNS server settings on Chrome OS 71, for example.

  1. Activate theSettingsmenu
  2. Select the connection for which you wish to setup Google Public DNS in theNetworksection of the configuration window. As an illustration:
  • To make changes to the settings for an Ethernet connection, select theEthernetsection from the drop-down menu. Select the proper network name by clicking on theWi-Fisection of the menu bar
  • To alter the settings for a wireless connection, repeat the process. It is not feasible to change the DNS settings for a mobile data connection that has been created via Instant Tethering. Changing the DNS settings for mobile Wi-Fi hotspots that have been manually configured, on the other hand, is possible by following the instructions for a wireless connection.
  • Expand theNetworksection to include the specified connection information. In theName serverssection, you will find the following information:
  • For IPv4: Click on the Google name serversbutton (or, alternatively, click on the Custom name serversbutton and enter the addresses 8.8.8.8 and 8.8.4.4)
  • For IPv6: Click on the Google name serversbutton (or, alternatively, click on the Custom name serversbutton and enter the addresses 8.8.8.8 and 8.8.4.4)
  • For IPv7: Click on the Google name serversbutton (or, alternatively, click on the Custom name serversbutton Custom name servers may be specified for IPv6 by selecting theCustom name serversbutton and entering the following numbers 2001:4860:4860:8888 et 2001:4860:4860:8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.
  1. To make the changes take effect, click outside theNetworksection. Check to see if your setup is functioning properly. see Try out your fresh configurations
  2. You should repeat the procedure for any other network connections that you want to modify.

Routers

Every router has a unique user interface for establishing DNS server settings; we only present a generic technique for configuring DNS server settings. For further information, please refer to the documentation that came with your router. To make changes to your router’s settings, follow these steps:

  1. To access the router’s management dashboard, navigate to the IP address of your router in your browser and type it in. Most routers are built with a default IP address, such as 192.168.0.1, 192.168.1.1, 192.168.2.1, or 192.168.1.100, as the default configuration. If none of these options work or the default gateway address has been changed, look for the default gateway address in the network settings panel of your system. When asked, enter the password to make changes to the network configuration. Locate the screen on which the DNS server configurations are provided
  2. If the IP addresses for the primary and secondary DNS servers are listed in the fields, make a note of them for future reference. You should substitute the following IP addresses for those provided by Google:
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.
  1. Save the file and quit
  2. Restart your browser to see the changes. Check to see if your setup is functioning properly. Check out your updated settings and see how they work.

Some routers have distinct fields for each of the eight components of IPv6 addresses and are unable to accept the:IPv6 abbreviation syntax, which is used by some clients. Fill in the blanks with the following information:

  • 2001:4860:4860:0:0:0:0:8888
  • s2001:4860:4860:0:0:0:0:8844

2001:4860:4860:0:0:0:0:8888;s2001:4860:4860:0:0:0:0:8844;

iOS

The following steps will walk you through the process of changing DNS settings on your iPhone, iPad, or iPod touch.

  1. Choose WiFi from the Settings menu. Then, tap the I symbol next to the Wi-Fi network you wish to modify the DNS servers for. Alternatively, scroll down to the DNS area, tapConfigure DNS, then tapManual and enter the Google IP addresses. You may also choose to delete all of the default DNS servers from the list if you choose.
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844.

The DNS server selected by the Wi-Fi network will be restored if the DNS setting is returned to Automatic.

Android

Google’s Android 9 operating system includes “Private DNS,” which makes use of DNS-over-TLS to ensure the security and privacy of your DNS requests. The next steps will walk you through the process of configuring it.

  1. Open SettingsNetworkInternetAdvancedPrivate DNS
  2. SelectPrivate DNS provider hostname
  3. Enterdns.googleas as the DNS provider’s domain name
  4. And then click Save to finish.

More details may be found in the Android blog article that announced the functionality. Remember that the default option for Private DNS in Android P is “Automatic,” which means that it will utilize the network-specified DNS server and will attempt a TLS connection on port 853 before dropping back to UDP on port 53.

Older Android versions

All networks cannot be configured using private DNS on devices running earlier Android versions than Android 9. DNS-over-TLS is not supported on devices running older Android versions than Android 9. DNS settings may be customized for each unique Wi-Fi network that you use. This method necessitates the manual configuration of all network information and is only advised for sophisticated users.

You might be interested:  How To Create A Restore Point In Windows 10

Mobile or other devices

DNS servers are commonly established in the advanced Wi-Fi settings section of the router. However, because each mobile device has a unique user interface for establishing DNS server settings, we only present a basic approach for configuring DNS server settings.

For further information, please refer to the documentation provided by your mobile service provider. To make changes to your mobile device’s settings, follow these steps:

  1. Navigate to the screen where Wi-Fi configurations are provided
  2. Locate the screen on which the DNS server configurations are provided
  3. Make a note of any IP addresses that appear in the fields designated for the primary and secondary DNS servers for future reference
  4. Otherwise, leave them blank. You should substitute the following IP addresses for those provided by Google:
  • If you’re using IPv4, you may use the addresses 8.8.8.8 and/or 8.8.4.4
  • If you’re using IPv6, you can use the addresses 001-4860-48660-8888 and/or 011-4860-48660-8844. If you just want to utilize IPv6 addresses, you can use Google Public DNS64instead of the IPv6 addresses listed in the preceding section.
  1. Save the file and quit
  2. Check to see if your setup is functioning properly. see Try out your fresh configurations

Test your new settings

To ensure that the Google DNS resolver is operational, do the following tests:

  1. For example, input hostname URL (such as If the hostname URL resolves successfully, close your browser, reload the page, and refresh it numerous times to ensure that the result is not from a cached web page
  • When utilizing Google Public DNS64 on an IPv6-only system, perform the preceding test using an IPv4-only hostname URL (for example, http://www.google.com/publicdns64/).
  • If all of these tests are successful, it means that everything is functioning properly. If this is not the case, go to the next step. Enter a set IP address into your browser’s address bar. When creating the URL, you can use (points to thetest-ipv6.comwebsite) as an example. 1
  • The URL should be replaced with/as if you are using Google Public DNS64 on an IPv6-only machine. The failure of this test indicates that the reserved prefix64: indicates that you do not have access to any NAT64 gateways. ff9b:/96 and is unable to make advantage of Google Public DNS64
  • If you are utilizing an IPv6-only system and do not have access to Google Public DNS64, you should use/as the URL.
  1. If this procedure is successful, restart the page with a newly launched browser to ensure that the page is loaded from the beginning. This indicates that your DNS setup is incorrect
  2. Follow the steps above to ensure that everything is configured correctly. If these tests are successful (but step 1 fails), this indicates that your DNS configuration is incorrect. If these tests fail, proceed to the next step, which is to undo the DNS modifications you made and re-run the tests to ensure they are successful. It is possible that an issue with your network settings is causing the failure of the tests
  3. Contact your ISP or network administrator for assistance.

If you have any difficulties after deciding to use Google Public DNS as your resolver, please follow the diagnostic method described below. 1Google expresses gratitude to Jason Fesler for giving permission to usetest-ipv6.comURLs for the sake of browser DNS testing.

Switch back to your old DNS settings

If you had not previously configured any customized DNS servers, you could select the option to enable obtaining DNS server addresses automatically and/or delete the Google IP addresses from the window in which you specified the Google IP addresses. This would allow you to revert to your previous settings if you had not previously configured any customized DNS servers. This will return your settings to the default servers provided by your ISP. When manually specifying IP addresses, follow the processes outlined above to specify the previous IP addresses.

Changing Your DNS Settings on Windows 10

If you haven’t updated your DNS address in the past, it’s likely that you are still using the one assigned to you by your Internet service provider. It is quite simple to change the DNS server on your smartphone, and by doing so, you may improve the privacy and security (as well as the performance, to a certain extent) of your device. A DNS is a series of numbers that you’ll need to enter into your device in order for it to be able to connect to the internet. For example, the DNS addresses for Google are 8.8.8.8 and 8.8.4.4.

The procedure of changing your DNS settings is straightforward.

In addition to OpenDNS and OpenNIC, Comodo Secure DNS and Google Public DNS are some of the public DNS servers that are available for you to utilize.

How to change the DNS settings on your Windows 10 PC

  1. Go to the Control Panel and select Network and Internet from the drop-down menu. Select Network and Sharing Center from the drop-down menu. Change the adapter settings by selecting it from the Change Adapter Settings menu. You’ll notice several network icons here. Right-click on the network to which you are presently connected and choose Properties. Choose Properties from the drop-down menu. Select IPv4 Properties from the IPv4 drop-down menu. Click on the radio option next to “Use the following DNS server addresses:” if “Obtain DNS server address automatically” is chosen
  2. Otherwise, leave it selected. Now, input the DNS addresses that you wish to utilize in your network
  3. Click on the Ok and Close buttons.

Your DNS settings on your Windows 10 computer have now been updated.

How to Change Your DNS Server in Windows 10 (and Why You’d Want To)

You are assigned to a DNS server created by your internet service provider (ISP) when you register with them. This feature makes it feasible for you to visit all of your favorite websites and services without having to manually type in their IP address each time. Unfortunately, not all DNS servers are made equal, which is unfortunate. There are a variety of reasons why you might want to alter your DNS settings in Windows 10, and it’s important to understand what they are and how they function in order to make an informed decision.

  1. And why is it necessary to have a DNS server, and what does it entail exactly?
  2. This is something that most of us take for granted – we key in the website’s name and it instantly directs us to where we want to go.
  3. This operation should be completed as quickly as possible since the lower your latency will be and the faster your browser will be able to fetch pages for you the better.
  4. It has already been stated that not all DNS servers are created equal.
  5. Additionally, the closer it is to your location, the faster it will be.
  6. In addition, there is the question of privacy and censorship to consider.
  7. Depending on the country, they may then share this information with government authorities as part of a broader campaign of mass surveillance.

So, should you switch to a different DNS server?

According to Lifehacker, in the majority of circumstances, using your ISP’s DNS server would result in a speedier experience.

CDNs get data from the server that is the most convenient for you based on your location.

They may, for example, only be in the vicinity of a large metropolis nearby.

As a result, what happened?

To sum up, you should usually only change your DNS server if you are concerned about your privacy or are encountering problems with your Internet service provider (ISP).

Having said that, it’s never a bad idea to explore.

What are the most reliable DNS servers?

As an example, the Yandex DNS service is headquartered in Russia and hence has poor performance in the United States.

In spite of this fact, there are several DNS service providers who provide outstanding coverage around the world. According to siteDNSPerf, these are the fastest free public DNS servers available everywhere in the globe (from fastest to slowest).

  1. There are several DNS servers, including Cloudflare DNS (1.1.1.1 and 1.0.0.1), NextDNS (45.90.28.42 and 45.90.30.42), Neustar DNS (64.6.64.6 and 64 6.65.6), Google DNS (8.10.8 and 8.8.4.4), and others. Cloudflare DNS is the most well-known of them.

This, of course, might differ depending on where you reside in the globe, so it’s always a good idea to double-check. Cloudflare, on the other hand, is well-known, has strong infrastructure all around the world, and is a privately held corporation. Therefore, we’ll concentrate our attention on how to convert your DNS to Cloudflare in Windows 10 further down this page. If you’re located in the United States, Google DNS servers are another acceptable option.

How to change DNS settings in Windows 10 via the Control Panel

By utilizing the Control Panel, you can make changes to your DNS servers more faster and with less confusion than using Microsoft’s built-in settings program. This is how you may go about it:

  1. Control Panel should be opened. Press “Start” and then “Control Panel” to open the Control Panel. Select the first result from the list
  2. Select ‘Network and Internet’ from the drop-down menu
  3. Then select ‘Network and Sharing Center’. Then, on the sidebar, select ‘Change adapter settings.’ Open the network properties on your computer. Right-click on the network that you’re currently connected to, which should be shown under your Wi-Fi or ethernet adaptor. Select “Properties” from the context menu at the bottom of the screen. IPv4 characteristics should be made available. Look for “Internet Protocol Version 4 (TCP/IPv4)” in the networking section of the menu bar. Click on it, then pick “Properties” from the drop-down menu beneath the selection window. Configure your domain name system (DNS). In the”General”tab, check the box that says “Use the following DNS server addresses” and then enter the addresses that you picked earlier in this section. In our instance, we’re using Cloudflare, thus the preferred DNS server should be 1.1.1.1 and the alternative DNS server should be 1.0.0.1, respectively. When you’re finished, click “OK.” The modifications will take effect immediately. You may find out what your DNS server is by going to this page and clicking on “What is my DNS Server?”

How to Change DNS on Windows 10 via Settings

Later versions of Windows 10 have the ability to modify DNS settings using the Settings app.

  1. Go to the Settings menu. After pressing the “Start”button, move your cursor over the settings cog, which is located above the power button. Alternatively, hit the Windows key plus I. Select ‘NetworkInternet’ from the drop-down menu. Open the Wi-Fi/Ethernet configurations. To connect to Wi-Fi, select the “Wi-Fi” header in the sidebar, then select your network in the main pane of the browser window. In the event that you are utilizing a wired ethernet connection, instead of clicking “Ethernet,” you should choose “Properties.” Make changes to your network’s IP configuration. Click on “Edit” under the “Network IP settings” section of the header. Choose ‘Manual’ from the drop-down menu. Configure your domain name system (DNS). To enable IPv4, set the switch to “On” and put your preferred DNS servers in the “Preferred DNS” and “Alternate DNS” boxes, respectively. Cloudflare’s IP addresses are “1.1.1.1” and “1.0.0.1” if you choose that service. When you are finished, there is no need to fill in any of the other fields, so you can simply click “Save” to save your work. The modifications will take effect immediately. You may find out what your DNS server is by going to this page and clicking on “What is my DNS Server?”

How to change DNS in Windows 10 with DNS CMD Commands

If you don’t have access to the GUI or simply want to configure your DNS from the command line, you may do so with the following command:

  1. Open the Command Prompt as an administrator by clicking on the Start button. After pressing “Start,” put “Command Prompt” into the search box. On the right-hand side, choose “Run as administrator”
  2. Then type in the DNS CMD instructions. First and foremost, we must choose the name of our network adapter. You may accomplish so by using the following command: netsh interface display interface. Find your network in the list of available networks. You may now use Windows 10 to change your primary DNS server by completing the following steps, substituting the word “Wi-Fi” for the name of your network adapter and “1.1.1.1” for the name of the primary DNS server you selected earlier. Set the DNS name for the interface to be “Wi-Fi.” The source address should be “static,” and the address should be “1.1.1.1.” Make the same changes for your secondary DNS server and its address by including index=2 to the end of your command as follows: The interface IP set DNS name=”Wi-Fi” source=”static” address=”1.0.0.1″ index=”2″ name=”Wi-Fi” source=”static” address=”1.0.0.1″ index=”2″ That’s all there is to it. The modifications will take effect immediately. You may find out what your DNS server is by going to this page and clicking on “What is my DNS Server?”

Thank you for taking the time to read our DNS tutorial for Windows 10. You may learn more about network adapters by reading our guide to activating and disabling network adapters, or you can try our network reset instruction if your DNS change didn’t go as planned.

How to Change DNS Settings on Windows 10

In order to ensure that your online browsing on Windows 10 is quicker and more secure, you may modify the DNS settings to use servers other than those provided by your Internet service provider. Changing the DNS settings on your computer allows you to utilize a service that is more secure and trustworthy than the one provided by your Internet service provider. It may be simpler to modify the DNS settings on your Wi-Fi routers so that all devices linked to it are utilizing the new settings. However, it is possible that you may wish to update the DNS settings on particular devices, most notably your PC.

This section will cover the conventional Control Panel approach of configuring your computer.

You might be interested:  How To Reboot Windows 10

DNS Server Settings

Here are the DNS configurations for three of the most popular and free alternative DNS providers available today:

  • Cloudflare DNS addresses are 1.1.1.1 and 1.0.0.1
  • OpenDNS addresses are 208.67.222.222 and 208.67.220.220
  • And Google DNS addresses are 1.1.1.1 and 1.0.0.1. 8.8.8.8 and 8.8.4.4 are the public DNS addresses for Google.

Change DNS Settings on Windows 10 via Settings

Users who have been using Windows 10 for a long time may opt to use the Control Panel technique. However, because Windows 10 is on a never-ending update cycle, we don’t know how long this will continue to be the case. So, let’s have a look at how to use the new Settings app. In fact, you may discover that this method is more convenient. OpenSettingsNetworkInternetand then select your internet connection type — either Ethernet or Wi-Fi — from the drop-down menu. Scroll down to the IP settings section and click theEditbutton next to the IP assignment to complete the process.

Connect the network to the IPv4 switch, then under the Preferred DNS section, enter in the addresses of the DNS services you wish to use, and then click Save. Take, for example, the screenshot below, where I’m utilizing Cloudflare DNS.

Change DNS Settings on Windows 10 Through Control Panel

It is much the same procedure as it was in previous versions of Windows to modify DNS settings in Windows 10 using the Control Panel configurations menu. The traditional Control Panel has been buried by Microsoft, but accessing its network settings is straightforward. Press the Windows key and type:network connections, followed by the Enter key. In Control Panel, this will open the Network Connections section, which you may then navigate through. Right-click on the network adapter you’re using and select Properties from the context menu.

To use the following DNS server addresses, selectUse the following DNS server addresses from the drop-down menu and fill in the relevant addresses for the service you wish to use, then clickOK.

Verify Your DNS Settings

You want to be certain that it worked. If you want to utilize the Control Panel, make sure to tick the box that says “Validate settings upon leaving.” It will run the Windows Troubleshooter and search for any problems that could exist. If the settings were input correctly, you will receive a message stating that no errors have been discovered. If this is the case, simply log back in and double-check that you supplied the right server addresses. Another method of ensuring that your modifications were properly implemented is to open the Command Prompt and type:ipconfig /all in the command line.

Try Alternative DNS Services

Using alternate DNS providers can help you protect your privacy while also increasing your surfing performance. However, it is critical to test out a variety of services to determine which one is the most effective for you. Cloudflare DNS is now regarded as the most efficient in terms of resolving the hostname. The business claims that webpages would load 28 percent quicker as a result of the upgrade. Additionally, it provides additional surfing privacy by never selling your information to third parties and by wiping your DNS requests after 24 hours, among other things.

It, for example, provides content screening and tailored messaging at the router level, among other things.

How to Change the DNS Server in

The vast majority of people have a fundamental knowledge of how the internet works and how it offers them with webpages to surf around on. As soon as you enter a URL link into your browser, the router transfers the relevant page that is stored on a remote server to your computer.

However, there’s more to it than meets the eye in this situation. The Domain Name System (DNS) server is one of the critical components that provides for speedy access to the full internet. Throughout this post, we’ll go over the DNS’s function as well as how to update your DNS server on Windows 10.

What Is DNS?

Computers and browsers, in contrast to humans, function by analyzing numerical data. Although a URL, such as absolutely illegible, is acceptable to them, we can’t image having to type strange digits every time we want to access a website. A DNS (Domain Name System) server is responsible for bridging the gap between humans and computers. You may use it to visit webpages since it provides a list of websites and their matching IP addresses that the browser can use to access webpages. As soon as you put a URL into the address bar, the browser checks the DNS cache and server for the appropriate IP address, after which it gets the website’s contents for you.

  • A DNS server can be found in a variety of configurations.
  • Even your computer will have a rudimentary DNS cache, which will save frequently used and current addresses in order to provide you with speedier access.
  • In addition, ISP servers might be prone to errors and blockages, which can lead customers to believe that they do not have internet connection at all.
  • There’s no way to avoid this unless you use a VPN or a browser that has a VPN built in, such as DuckDuckGo.

DNS Problems

While DNS servers are a critical component of the internet’s infrastructure, they are also frequently targeted by cybercriminals. Using a cache poisoning or DNS hijacking technique, a phishing assault can cause your DNS server to redirect to a server of their choosing, or they can present you with a list of bogus IP addresses for already existing URLs. Your browser will then be led to bogus websites, which might result in a variety of security breaches involving your online accounts and services, depending on the situation.

Changes to your device’s DNS settings are a positive start toward enhanced security, but they are only beneficial if the server you wish to use is more secure than the one that was originally used.

How Do I Find My Alternate DNS Server in Windows 10

However, because ISP DNS servers aren’t completely secure, and you can never be too sure about what’s going on behind the scenes, there are a few more possibilities for a DNS server that avoid using these systems altogether. Cloudflare’s secure DNS service and Google’s DNS domain (addresses 8.8.8.8 and 8.8.4.4) are the two most widely used services (at 1.1.1.1 or 1.0.0.1). These two businesses have earned a reputation for putting a strong emphasis on security and quickness. Google’s DNS servers are often regarded as being among the most responsive currently available.

For personal usage, you can’t go wrong with Google or Cloudflare DNS, despite the fact that there are alternative public DNS providers available. It is necessary to figure out how to locate your current DNS settings before proceeding with the modification process. This is how you go about it:

  1. The Network icon in the toolbar should be selected. Select the network that you are presently connected to
  2. To bring up the current network’s current configuration, click on it once more. The DNS settings that are currently in effect are presented in the Properties table. Keep an eye out for the fields “IPv4 DNS servers” and “IPv6 DNS servers.”

It is possible to solve difficulties and make adjustments to your DNS servers once you have identified the DNS servers you are using (which are most likely either the router’s or the ISP’s settings).

How to Change the DNS Server in Windows 10

Now that you have a better understanding of the DNS service and how it might affect your surfing experience and security, you must learn how to modify the settings on your device. There are several ways available for accomplishing this, all of which may be utilized to produce a rapid adjustment that will last. The following is the most common technique for changing these settings on a Windows PC:

  1. To access the network, choose the Network icon in the upper-right corner of your toolbar. Open the Network/Internet Connections window
  2. Select “Change adapter settings” from the drop-down menu. Right-click on the network you wish to modify and select Properties from the context menu. Select “Internet Protocol Version 4 (TCP/IPv4)” from the drop-down menu. Select Properties from the drop-down menu. Activate the radial button that says, “Use the following DNS server addresses.” Using this feature, you will be able to manually enter your chosen DNS servers. In the corresponding fields, enter two IPv4 addresses one after the other. The primary DNS server and the backup DNS server of a DNS service are often included in this group. Utilize 8.8.8.8 as the first line and 8.8.4.4 as the second line if you wish to use Google’s DNS
  3. Then click on OK and then exit the Properties dialog box.

Only the IPv4 parameters will be altered by these configurations. Ipv4 is one of two protocols in use, the other being the bigger IPv6, which has its own set of addresses and is more widely used. If you wish to make changes to your IPv4 settings, repeat the instructions above, but in Step 5 choose Internet Protocol Version 6 (TCP/IPv6) instead of Internet Protocol Version 4. The IP addresses you provide in the text boxes will be different as well, and you’ll need to consult your DNS service to ensure that you’re entering the proper addresses.

Consider the following scenario: your PC connects to the internet via a variety of different networks, such as a laptop that switches between an Ethernet and a Wi-Fi connection at various times.

How to Change Your Windows 10 DNS Settings Using Command Prompt

If you’re more tech-savvy and prefer to complete all of your tasks using the command line, you may change the DNS server from the command prompt. What you need to do is as follows:

  1. Administrator mode should be enabled in the Command Prompt. To activate the network settings tool, type the following command into the prompt and press Enter: netsh
  2. To activate the network settings tool, type the following command into the prompt and press Enter: netsh
  3. Insert the following line to display a list of all available network adapters, then press Enter: interface display the interface The prompt will display a list of all of the available adapters. You must first determine which ones need to be changed. When retrieving this article, for example, your Ethernet and wireless adapters are most likely in the ‘Connected’ state, which indicates that they are currently in use. To configure the main DNS address on a network device, use the following command: ip address as an interface change the name of the domain to “ADAPTER-NAME” source=”static” address=”X.X.X.X” The name of the adapter whose settings you’re updating is represented by the value ADAPTER-NAME, which you may find out about in Step 3. The intended DNS address is X.X.X.X, which you are entering in the box
  4. You’ll also need to run the following command to configure the secondary DNS address: interface ip add dns name=”ADAPTER-NAME” interface ip add dns name=”ADAPTER-NAME” addr=”X.X.X.X” index=2 The same reasoning that was used in Step 4 applies to the values. After that, you may raise the number under ‘index’ to include additional secondary addresses, but for most people, one primary address and one secondary address will be sufficient. Disconnect from the Command Prompt

After making these changes, the PC will immediately begin utilizing the new hostname resolution settings as soon as the changes are saved.

How to Reset Your DNS Server in Windows 10

If you want to restore your DNS settings to their default values, you can do so by following the steps outlined below:

  1. The Network icon in the toolbar should be selected. Open the Network/Internet Connections window
  2. Select “Change adapter settings” from the drop-down menu. Right-click on the network you wish to update and select Properties from the context menu. Select “Internet Protocol Version 4 (TCP/IPv4)” from the drop-down menu. Select Properties from the drop-down menu. Click on the radial button labeled “Obtain DNS server address automatically” to begin. If everything seems good, click OK to dismiss the Properties dialog box.

This option will undo all of the modifications that have been done to the adapter and enable you to return to using the default DNS servers.

How to Flush Your DNS Cache

It is recommended that you delete the DNS cache on your computer after making any changes to your DNS settings. This cache holds IP addresses that are often used or those that have been used lately. Even if your DNS server has provided you with an inaccurate address, and your PC has cached that address, any further changes to the server address will be insignificant until the PC automatically refreshes the cache. In order to prevent the PC from reusing incorrect DNS settings and fetching incorrect IP addresses for its programs, it is necessary to flush the DNS cache.

  1. Open the Command Prompt in Administrator Mode by pressing the Windows key + X. This may be accomplished by searching for ‘cmd’ in the PC’s search box, right-clicking the “Command Prompt” result (which is generally the first one displayed), and selecting “Run as administrator.” Alternatively Enter the following command or copy and paste it into your browser: ipconfig /flushdns
  2. Following this, you should receive an email stating that the DNS Resolver Cache has been flushed. Exit the command prompt window

Flushing the DNS may also be used as a first step in troubleshooting more frequent internet connection difficulties before more extensive troubleshooting is required.

Make Changes Wisely

You should now be able to modify the DNS settings on your computer. If you want some of the greatest publicly accessible alternatives, you may utilize the free DNS servers supplied by Google or Cloudflare, or you can choose a different service that works best for you. The default servers provided by your ISP are normally a safe bet, but they might be more difficult to troubleshoot in the event of a mistake. The Domain Name System (DNS) is a critical component of network infrastructure, and several frequent problems can be remedied by simply adjusting the DNS system’s settings.

Please share your thoughts in the comments box below.

Leave a Comment

Your email address will not be published. Required fields are marked *