How To Change Drive Letter Windows 10

Contents

Change a drive letter

Continue to the main content This browser is no longer supported by the manufacturer. You may benefit from the newest features, security updates, and technical support by switching to Microsoft Edge from Internet Explorer.

Please rate your experience

The information you provide will be forwarded to Microsoft: By clicking the submit button, your input will be used to improve Microsoft products and services in the future. Policy on personal information. Thank you very much.

In this article

Apply to:Windows 10, Windows 8.1, Windows 7, Windows Server 2019 and 2016, Windows Server 2012 R2 and 2012If you don’t like the drive letter allocated to an existing drive, or if you have a drive that hasn’t yet been assigned a drive letter, you may alter it using Disk Management to make the change. See Mount a drive in a folder for information on mounting a drive in an empty folder so that it looks as simply another folder.ImportantIf you alter the drive letter of a disk where Windows or programs are installed, apps may have difficulty starting or locating that drive.

  1. Disk Management should be opened with administrator privileges. Choose Disk Management from the Start menu by selecting and holding (or right-clicking) the Start button
  2. Select and hold (or right-click) the volume for which you wish to alter or add a drive letter in Disk Management, and then selectChange Drive Letter and Paths from the drop-down menu. Tip Change Drive Letter and Paths isn’t visible or is grayed out, which indicates that the volume isn’t ready to be assigned a drive letter. This can occur if the volume is unallocated and has to be initialized, for example. Alternatively, it may be that the partition is not intended to be accessible, as is the case with EFI system partitions and recovery partitions. If you’ve checked that you have a formatted volume with a drive letter that you can access and you’re still unable to alter it, regrettably, this topic is unlikely to be of assistance
  3. Instead, we recommend contacting Microsoft or the manufacturer of your PC for more assistance. Alter is the option to change the drive letter. To assign a drive letter to a drive that does not already have one, selectAdd
  4. To remove a drive letter from a drive that already has one, selectRemove
  5. Once you’ve selected the new drive letter, click OK, and then confirm your decision when questioned about the possibility that applications that rely on the drive letter will not operate correctly.

Feedback

Feedback may be sent and viewed for

How to assign a drive letter in Windows 10

Detailed instructions on how to assign a specific drive letter to an external drive, SD card, or hard drive partition in Windows 10 using the Disk Management tool. The next available letter after C, which is generally reserved for your system drive, is automatically assigned to the new drive when you attach it to your PC for the first time. As a result, depending on how many drive letters are currently in use, an external hard drive or USB thumb drive may be assigned the letter D, E, F, or anything else.

Perhaps you want to use the letter M for your music files and the letter X for your top-secret X-Files files.

  1. Prevent the disk you’re relettering from being used and ensure that no files from that drive are currently open. To begin, right-click the Start button. To access the Disk Management console, select Disk Management from the drop-down menu. Right-click the volume that bears the drive letter you wish to alter and select “Change Drive Letter.” Change the drive letter and path by clicking Change Drive Letter and Paths. Choose Change from the drop-down menu. Select a drive letter from a list of those that are currently accessible. It’s best not to use the letters A or B, which have traditionally been designated for floppy disks and can cause confusion in older applications. To proceed, click OK. Whether a pop-up box displays asking if you are sure you want to do this, select Yes from the list. Close the Disk Management interface and restart the computer.

Although you may be need to restart your computer for the change to take effect, the drive will begin using the new letter as soon as you do.

More Windows tips…

  • Depending on your computer, you may need to restart it in order for the change to take effect. Once done, the drive will begin to utilize its newly assigned letter.

How to Change a Drive’s Letter in Windows

  • Disk Management should be opened. Locate the drive that has to be changed. Change the drive letter and paths by selectingChange Drive Letter and PathsChange from the context menu. Choose the drive letter you wish to assign from the drop-down menu. Assign the following drive letter to the computer. Afterwards, choose OK and Yes
  • And

Disk Management should now be visible on your computer screen. Navigate to the drive that you wish to alter the configuration of. Then selectChange Drive Letter and PathsChange from the contextual menu. You may assign a drive letter by selecting it from the drop-down menu. A drive letter of the following type should be assigned: Afterwards, pick OK and Yes.

How to Change Drive Letters in Windows

Follow these procedures if you want to modify the driver letters in any Windows operating system. It is not possible to modify the drive letter of the partition on which Windows is installed. When it comes to computers, the C drive is generally the default.

  1. Open Disk Management, a Windows utility that, among other things, allows you to control drive letters and other storage devices. Disk Management is also accessible through the Power User Menu (by pressing the WIN + X keyboard shortcut) in Windows 11/10/8, and this is likely the quickest method of accessing it. Alternatively, you may run Disk Management from the Command Prompt in any version of Windows, but for the majority of users, launching it from Computer Management is probably the most convenient option. Locate the drive you wish to modify the drive letter of from the list at the top of the page or from the map at the bottom of the page. If you’re not sure that the drive you’re looking at is the one you want to change the drive letter for, you may right-click or tap-and-hold the drive and then chooseExplore from the pop-up window that appears. If necessary, check through the folders to determine whether or not it is the correct drive. Change the drive letter and paths by selecting it with the right-click or tap-and-hold button. SelectChange. If you accidentally choose the primary drive, some versions of Windows will display a notice that reads, “You have selected the primary drive by mistake.” Windows is unable to change the drive letter assigned to your system disk or boot volume. If you wish Windows to give this storage device a drive letter, pick the drive letter from theAssign the following drive letter drop-down box. You don’t have to be concerned if the drive letter you want is already in use by another drive because Windows conceals any letters that aren’t available for usage. Some programs that rely on drive letters may not function properly if you select OK and Yes to the following questions: Are you sure you want to proceed? question. If you have software installed on this disk, it is possible that it will no longer function correctly after changing the letter. More information about this may be found in the section below. Once the drive letter change is complete, which generally takes only a second or two, you are free to dismiss any open Disk Management or other windows
  2. However, if you do so, you will lose access to your data.

If You Have Programs Not on the Main Drive

Drive letter designations for drives that have software loaded on them may become inoperable if the drive letter assignments are changed. Even while this is less prevalent with newer programs and apps, if you have an older software, especially if you’re still running Windows XP or Windows Vista, you’re likely to run across this issue.

Fortunately, most of us do not have software installed on drives other than the primary drive (which is normally theCdrive), but if you do, consider this your warning that you may need to reinstall the program if you change the letter of your primary drive.

No Changes for the Operating System Drive

Changes to the drive letter of a disk on which the Windows operating system has been installed are not possible. If you want Windows to be installed on a different drive than C, or whatever drive it happens to be at the moment, you can make that happen, but you’ll have to do a clean Windows installation first. Except in extreme circumstances, such as a critical requirement for Windows to be installed on a new drive letter, we do not advocate going to all that bother.

Change, Don’t Switch

In Windows, there is no built-in option to swap drive letters between two different drives. Utilize a drive letter that you do not intend to use in the future as a temporary “holding” letter while you are going through the drive letter changing process. Consider the following scenario: you’d want to switch DriveA with DriveB. Start by altering Drive A’s letter to a letter that you aren’t planning on using (such as X), then Drive B’s letter to Drive A’s original letter, and lastly Drive A’s letter to Drive B’s original letter (as seen above).

Using the Command Prompt

Changes to the drive letter can also be made from within the Command Prompt. Even though using the diskpartcommand is not as simple as using Disk Management and you cannot see which letters are available to chose from straight away, it is totally achievable using thediskpartcommand. Thank you for informing us about this!

How to Change Drive Letter in Windows 10

From the Command Prompt, you may easily alter the drive letter. Even while using the diskpartcommand is not as simple as using Disk Management and you cannot see which letters are available to chose from straight away, it is entirely possible. Congratulations on notifying us!

Steps to change drive letter in Windows 10:

Step 1: Launch the Disk Management application. Step 2: Right-click a hard disk and selectChange Drive Letter and Paths from the context menu that appears on the right. Step 3: To proceed, selectChange from the pop-up window that appears. Step 4: Choose a new drive letter and press the OK button. Step 5: Select Yes to confirm the change in drive letter. This has been accomplished, as seen in the accompanying screen image, by changing the letter assigned to the selected hard disk. Articles that are related:

  • The best way to modify the Windows 10 drive optimization schedule. Change the size of the recycle bin on a hard drive in Windows 10
  • 2 Methods for Renaming a Hard Drive in Windows 10
  • What is the best way to add a hard drive to this computer in Windows 10? How to Create a Password for Your Hard Drive in Windows 10
You might be interested:  How To Delete Partitions Windows 10

How to manage and assign permament drive letters in Windows 10

When you connect a portable storage device or an internal hard drive to Windows 10, the system automatically identifies and assigns a drive letter to make the device functional. When attaching an external drive (such as a USB flash drive, SD or microSD cards), the system may assign a different letter to the disk, which can be inconvenient and time-consuming. The same drive letter on several devices may be achieved by manually assigning a permanent letter to every drive attached to your computer.

It will be impossible for Windows 10 to assign an additional letter or attempt to set an existing letter if this method is used.

Additionally, it is beneficial to choose a drive letter that makes more sense to you.

As long as you’re connecting the drive to the same device and the letter you’re assigning isn’t already in use, we’ll walk you through numerous techniques to manually assign a permanent letter to a drive in this Windows 10 article.

  • How to assign a drive letter using Disk Management
  • How to assign a drive letter using the Command Prompt
  • How to assign a drive letter using the Windows Explorer
  • How to assign a drive letter in PowerShell
  • How to allocate a drive letter in Windows

How to assign a drive letter using Disk Management

Using the Disk Management tool, you may change the drive letters by following these steps:

  1. To access the Drive Management experience, go to Start > Search > Create and format hard disk partitions and choose the first result to launch the Disk Management experience
  2. Change the drive letter and paths by right-clicking the drive and selectingChange Drive Letter and Paths
  3. To make a change, press theChangebutton. Select the option “Assign the following drive letter” from the drop-down menu. To assign a new drive letter, choose it from the drop-down option. Quick tip: To avoid the system assigning the same letter to many drives at the same time, it’s a good idea to begin adding letters in reverse chronological order. As an example, when allocating a new letter, it is preferable to begin with a letter other than D, E, or F rather than D, E, or F. Click theOKbutton twice more
  4. Then click theOKbutton once more.

Once you have completed these steps, the drive will permanently keep the letter that you have assigned to it, even if it is disconnected and then reconnected. If you attach the drive to another device, though, it may receive a different letter from the first.

How to assign a drive letter using Command Prompt

While using Disk Management to assign a new drive letter is the quickest and most convenient method, you can alternatively conduct the same action using DiskPart in the Command Prompt. The following are the methods to assign a drive letter using Command Prompt:

  1. OpenStart
  2. Search forCommand Prompt in the search results, right-click the result, and then pick theRun as administrator option. In order to launch DiskPart, type the following command and press Enter:diskpart
  3. Enter the following command to display a list of all the available volumes: Type the following command to display a list of all the available volumes and press Enter: volume of the list To choose the volume (drive) to which a new letter should be assigned, type the following command and press Enter: Volume 3 should be selected. Make careful to replace “3” with the number that corresponds to the drive on your device when running the program. If you want to assign a new drive letter, type the following command and press Enter: assign letter=Z to the sentence
  4. The letter “Z” is assigned to the drive if it is available, which is assumed by the command. Make careful you substitute the letter you wish to use for the one that is currently in use
  5. Otherwise, the error will occur.

Following completion of these procedures, Windows 10 should assign the same letter to the storage device every time it is connected to the same device in the same way that it does with Disk Management.

How to assign a drive letter using PowerShell

As an alternative, you may use PowerShell to change a drive letter on Windows 10 by following the procedures outlined below:

  1. Search for PowerShell in the Start menu, right-click the result, and then pick theRun as administrator option
  2. Then close the Start menu. To see a list of accessible drives, use the following command and press Enter: Get-Disk
  3. If you want to give the drive a permanent letter, use the following command and press Enter: assigndriveletter The commands Get-Partition -DiskNumber 1 and Set-Partition -NewDrive are used to create a partition on a disk. Z is for the letter Z
  4. Make sure you replace “1” with the number that corresponds to the drive that you want to edit, and “Z” with the letter that you want to use in place of the old one.

The drive will be available through File Explorer using the letter that you assigned it once you have completed the procedures, and Windows 10 will not attempt to modify it. The following was updated on March 7, 2019: We updated this tutorial to ensure that it is up to date with the most recent version of Microsoft Windows 10.

More Windows 10 resources

More useful information, coverage, and answers to frequently asked concerns regarding Windows 10 may be found at the following websites and resources:

  • Everything you need to know about Windows 10 on Windows Central
  • Help, hints, and tips for using Windows 10
  • Windows 10 discussion boards are available on Windows Central.

How to Change a Drive Letter in

Changing drive letters in Windows provides a number of advantages, to be sure. If you want to restrict all applications on your computer from writing to a single drive, you may conceal that drive from all of the programs on your computer. In this article, we’ll show you how to change drive letters in Windows 10 and why you should do so. You will learn how to replace or delete various drive letters in this post, which will provide step-by-step instructions.

How to Change a Drive Letter in Windows 10

There are certain advantages to changing drive letters in Windows. If you want to restrict all applications on your computer from writing to a single drive, you may hide that drive from all of the applications on your computer. Please note that this article is just for Windows 10 users who want to modify their drive letters. You will learn how to replace or delete various drive letters in this post, which includes step-by-step instructions.

  1. Right-click on the Windows Start button and select “Disk Management” from the drop-down menu that appears. Right-click on the drive for which you wish to modify the letter designation. Select “Change Drive Letter and Paths” from the drop-down menu, and then click “Change” to make the changes. Windows will now prompt you to give your drive a new name, which you should do. You can select any of the remaining A-Z letters from the drop-down menu. “OK” should be selected. The fact that applications placed on this disk may not function properly will not be communicated to you by Windows. “Yes” should be selected.

You have now completed the process of changing a drive letter in Windows 10.

How to Remove a Drive Letter in Windows 10

If you wish to delete a drive letter from Windows 10, you may do it through the Desk Management interface. Simply take these straightforward steps:

  1. Right-click on the Windows Start button to bring up the context menu. Select the “Disk Management” option from the drop-down menu
  2. Click OK. Right-click on the drive for which you wish to modify the letter designation. Select “Change Drive Letter and Paths” from the drop-down menu that appears. In the dialog box that appears, select “Remove.” Windows will now notify you that files that rely on this partition may not function properly
  3. This is a good thing. To confirm the procedure, press the “OK” button.

You have now completed the process of removing a drive letter in Windows 10. After deleting a drive letter from your computer, you will no longer be able to view it in your File Explorer. Aside from that, in order to delete a letter, you must log in as the administrator.

How to Change a Network Drive Letter in Windows 10

Changing the letter assigned to a network drive in Windows is a very basic procedure. Simply follow the instructions outlined below, and you’ll be set to go:

  1. Open the File Explorer and navigate to the “This PC” area. To map a network drive, select “Map network drive” from the top of the ribbon menu. There will be a drop-down menu displayed
  2. Select the “Map network drive” option from the drop-down menu. After that, you’ll be presented with a new window asking you to select a drive letter for your network folder. Go ahead and select a different letter
  3. In the box labeled “Folder,” type in the whole address of your network’s shared folder. You may also look for it on the internet
  4. Click on the “Finish” button.

Additional Steps if You Receive an Error Message:

  1. Navigate to the Control Panel and select “Network and Sharing Center.” Select “Change advanced sharing options” from the drop-down menu
  2. Then select “Turn on network discovery.” Make a copy of your modifications

You should now be able to view your network share in the “This PC” window.

How to Change a USB Drive Letter in Windows 10

If Window Explorer does not identify the external hard drive, you may need to rename the USB drive letter in Windows 10 to something more appropriate. If you need to alter the letter of your USB drive for this or any other reason, simply follow these simple steps:

  1. Right-click on the Windows Start button and select “Disk Management” from the drop-down menu that appears. Right-click on the USB device for which you wish to modify the letter designation
  2. Select “Change Drive Letter and Paths” from the drop-down menu that appears. In the pop-up box that appears, select “Change.” Windows will now prompt you to give your drive a new name, which you should do. You can select any of the remaining A-Z letters from the drop-down list. The name of your USB drive may not appear in the list
  3. If this is the case, you may add it by selecting “Add.” Select a new letter from the drop-down menu and press “OK” to preserve your changes.

You have now successfully changed the letter of your USB drive.

How to Change Drive Letter in Windows 10 Using Command Prompt

In addition to utilizing the Control Prompt, you may also alter drive letters in Windows 10. This procedure is quite straightforward:

  1. Check to ensure that your computer is functioning in administrator mode. Open the Command Prompt window. Open the Command Prompt application by entering “Command Prompt” into the search box and pressing “Enter.” Once you’re in, put “diskpart” into the search box and press Enter
  2. Type “list volume” to receive a list of all the volumes that are currently available on your computer
  3. Take a look at the output. Locate and note the volume number of the drive that you wish to rename
  4. And To pick a drive, enter the following command: Volume NUMBER should be selected. Then, in place of NUMBER, provide the volume number under which your drive is located. Run the following command to alter the drive letter: Assign the letter X to the variable. Once you’ve done so, just substitute the letter you wish to give to your drive for X.

You have now successfully updated your Windows 10 drive letter.

How to Change DVD Drive Letter in Windows 10

Changing the DVD drive letter in Windows 10 is a simple process that can be accomplished using Disk Management. Simply follow the instructions outlined below:

  1. Right-click on the Windows Start button and select “Disk Management” from the drop-down menu that appears. Using your right mouse button, choose the DVD drive for which you wish to modify the letter
  2. Select “Change Drive Letter and Paths” from the drop-down menu, and then click “Change” to make the changes. Windows will now prompt you to rename your DVD drive, which you may do if you choose. You can select any of the remaining A-Z letters from the drop-down menu. “OK” should be selected. Windows will not alert you to the fact that applications placed on this disk may not function properly. “Yes” should be selected.

By selecting “Disk Management” from the drop-down menu, you may manage your hard drive’s storage space. Using your right mouse button, choose the DVD drive you wish to rename. Select “Change Drive Letter and Paths” from the drop-down menu, and then click “Change” to save your changes. In order to use your DVD drive, Windows will prompt you to assign a new drive letter. Alternatively, you may select one of the remaining A-Z letters from the drop-down option. “OK.” is selected. Windows will not alert you to the possibility that applications placed on this disk may not function properly.

How to Change Recovery Drive Letter in Windows 10

A few seconds are all it takes to change your recovery drive’s location. What you need to do is as follows:

  1. Right-click on the Windows Start button and select “Disk Management” from the drop-down menu that appears. To alter the letter of the Recovery drive, right-click on it and select “Change Letter.” Select “Change Drive Letter and Paths” from the drop-down menu, and then click “Change” to make the changes. Windows will now prompt you to rename the Recovery drive, which you may do by pressing F2. You can select any of the remaining A-Z letters from the drop-down menu. “OK” should be selected. Windows will not alert you to the fact that applications placed on this disk may not function properly. “Yes” should be selected.
You might be interested:  How To Find Network Security Key Windows 10

How to Change Boot Drive Letter in Windows 10

Unfortunately, altering your Windows boot disk letter is not feasible using the Desk Management interface at this time. We only advocate replacing your boot drive if you are in a critical situation. Otherwise, you should refrain from making any modifications to your boot disk. The failure to take the appropriate steps may result in your system not being able to function correctly. As a result, please take your time and carefully follow the instructions we’ve provided. Additionally, you should create a backup of your system before moving further.

If you want to assign a different letter to your C drive, you must first rename the DosDeviceletter: value to a letter that is not currently in use on your computer.

  1. Make a complete backup of your system. Make certain that you are logged in as Admin. Run the “Regedt32.exe” program and look for the following registry key: HKEY LOCAL MACHINESYSTEMMountedDevices
  2. Select “MountedDevices” from the drop-down menu. Make your way over to the “Security” menu and select “Permissions.” Check that you have total control in your role as administrator. “Regedt32.exe” should be closed down. Then run the program “Regedit.exe.” Look for the following registry key: HKEY LOCAL MACHINESYSTEMMountedDevices
  3. Look for the new letter for your drive on your computer. Locate the DosDeviceC: drive and right-click on it
  4. To rename something, click “Rename.” Keep in mind that you must use Regedit rather than Regedt32 in order to complete your task. Change the name of the file to a new drive letter, such as DosDevicesZ:. This will completely wipe off your C partition. Navigate to the location of the drive that you desire to alter the letter of. Locate the file DosDeviceD:. Rename it by selecting it with the right-click menu. Change the name of the drive to DosDeviceC: to reflect the new drive letter. Click “Rename” after selecting the proper value for DosDevicesZ:
  5. Change the name of the folder to DosDevicesD:
  6. Close Regedit and launch Regedt32 instead. Change the administrator permissions to “Read Only”
  7. Restart your computer

Changing your Windows 10 boot drive letter has now been accomplished successfully.

Additional FAQs

Changing drive letters is not a difficult task in and of itself. However, if your computer is required to run a file that has been stored in that particular disk, you may have difficulties. Windows does not notify you before altering the letter of a drive just because it wants to be nice. Generally speaking, changing drive letters is not suggested unless it is necessary to resolve a specific issue in the case in question. For example, if your Windows Explorer does not identify an external device that is associated with a certain driver, it is OK to rename the device.

There are several drives whose letters can be changed without having any ramifications. For example, you may move files to a disk that contains files that you rarely use. You may also alter the letter of an external drive without encountering any difficulties.

Changing Drive Letters in Windows 10

Here are some helpful hints on how to alter drive letters in Windows 10. We hope you found this post to be informative. Remember, only perform this action if it is really required, as it may cause some applications on your computer to malfunction. Have you ever had to alter the drive letters on your computer for a particular reason? Were there any issues that you had to deal with? Please share your thoughts and experiences in the space below.

3 Simple Ways to Assign a Drive Letter in Windows 10/8/7

A drive letter is an alphabetic character that is used to identify a physical computer disk or drive partition on a computer system. By default, Windows will assign any storage device a drive letter that can be accessed by the computer’s operating system. It begins with the letter A and progresses through the entire alphabet. By default, Windows will assign any storage device a drive letter that can be accessed by the computer’s operating system. The floppy drive and portable media drives, such as tape drives, are assigned drive letters A: and B: by the OS, respectively.

  1. Manually assigning such letters is still an option if you so want.
  2. The CD-ROM or other disc drive is the drive letter that comes last (e.g., D:).
  3. C: may only be allocated to the drive on which Windows or MS-DOS is installed, and no other drive letters can be assigned.
  4. Hard drives and disc drives, such as DVD drives, are now standard on most current desktops and laptops, but floppy disk drives are no longer available.
  5. Flash drives, cellphones, and other storage devices are assigned the drive letter that was used most recently.
  6. In the event that you add other drives or build new partitions, they will be assigned to drive letters other than C:, such as D; E; F:; G:; and so on.

How Assigned Drive Letters Work

You have the ability to change the drive letter that Windows assigns to your computer. In the event that you change the drive letter of a drive, the registry records the change per drive and volume ID. There is no permanent assignment of a drive letter to the device as a result of this. If you unplug the device or make any changes to it, the drive letter on your computer may change. Those of you who use USB drives on a regular basis may have noticed that the drive letter changes each time you attach one.

If the allocated drive is not attached, Windows will assign the drive letter to another drive if the given drive is not attached.

When it comes to altering the drive letter of your computer, Windows provides a number of possibilities.

Learn how to assign drive letters using three distinct tools with the help of the following instruction. Disk Management, EaseUS Partition Master, and the Windows Command Prompt will all be used in this tutorial.

Assign a Drive Letter on Windows 10 with Disk Management

The Disk Management program included with Windows allows you to organize and manage your drives. Change drive letters, create new partitions, remove old partitions, and perform a variety of other operations on your computer. To change the drive letter, follow the instructions outlined below. Step 1. You will need to launch Disk Management as an administrator in order to complete this step. Right-click on the Start button and select Disk Management from the context menu. Then, in the Disk Management window, choose the volume you wish to edit or add a drive letter by selecting it from the context menu.

Step 3: To change the drive letter, select “Change” from the drop-down menu.

Choosing a new drive letter and clicking “OK” are the next steps.

Simply confirm your decision by clicking “Yes” to exit the window.

Assign and Change Drive Letter with EaseUS Partition Manager

Your team is working on a project, and you need to copy certain files to a USB flash drive to keep them safe and secure. You, on the other hand, have no notion what the drive letter of the USB of your team is. The majority of individuals have dealt with this problem in the past. You may give a drive letter to each driver with the help of EaseUS Partition Master, which is a simple solution. Users may manage drives without having to go through a time-consuming process with EaseUS Partition Manager.

Now, for free, you can download this basic partition program that allows you to set drive letters in a few simple clicks.

2.In the new box, click the down arrow and select a drive letter for the partition from the drop-down option that appears.

Assign a Drive Letter Windows 10 Using Command Prompt

It is possible to assign drive letters to any directory on a computer by using the Windows Command Prompt. It is especially advantageous for users who have a large number of storage devices linked to their PCs. We’ll walk you through the process of changing a drive letter using the command prompt in the section below. Step 1: Open a command prompt with elevated privileges. To open the search box, press Windows + Sto at the same time. Typecmd. Select “Run as administrator” from the context menu that appears when the command prompt appears.

To continue, hit the Enter key.

Step 4.Pay close attention to the volume number of the drive on which you wish to modify the letter designation.

Replace the volume number with the number of the volume included within the. Step 5: Type the assignment letter. You should substitute the new drive letter with the newly assigned internal drive letter. Done. After you’ve finished, you may exit out of the command prompt.

Conclusion

You have a variety of options for assigning different letters to your drivers. For example, using Windows Disk Management and the command prompt are both viable options. EaseUS partition manager, on the other hand, allows you complete control over your hard disk. Additionally, EaseUS Partition Master assigns a drive letter to any disk or partition, among other things. Aside from altering drive letters, you may also remove, divide, and erase partitions, according on your needs. All of this is accomplished without the need to restart your computer many times or risk deleting data.

Fixed Change Drive Letter and Paths Greyed Out Windows 10

Q1: “The ‘Change Drive Letter and Paths’ option in the Windows 10 Disk Management tool is greyed out, making it impossible to change the drive letter of a drive or partition.” Q2: “The ‘Change Drive Letter and Paths’ option in the Windows 10 Disk Management tool is greyed out, making it impossible to change the drive letter of a drive or partition.” Q2: What is your favorite type of music? “My Windows 10 computer’s Disk Management is unable to modify the letter assigned to a disk. So, what am I supposed to do?

What do you mean?” Windows Disk Management is a built-in management tool that allows users to perform basic disk management tasks on Windows 10, Windows 8, and Windows 7.

It is possible, however, that you may be unable to change drive letter and pathways on Windows 10by using Disk Management and that thechange disk letter and paths option would be greyed out for unknown reasons, as seen in the following screenshot: When the ‘Change Drive Letter and Paths’ option in Windows 10 Disk Management is greyed out, you will be unable to give a new drive letter to your hard drive partition, USB flash drive, SD card, or other external storage devices unless you restart your computer.

What is the best way to deal with this situation?

In the sections below, you’ll find efficient techniques for changing drive letter, even if the change drive letter and paths options are grayed out in Disk Management.

Change Drive Letter and Paths Greyed Out, How to Change Drive Letter Without Using Disk Management

Not to worry if the Disk Management program does not function properly while attempting to change the drive letter on your PC or storage devices. You can directly follow one of the procedures listed below to get your problem resolved immediately.

Method 1. Change Drive Letter with Free Partition Management Tool

EaseUS Partition Master Free is a free partition management program that allows you to easily change device drive letter without having to format your computer on Windows 10/8/7. With a few clicks, you may assign or alter the drive letter assigned to your computer. Compared to other disk and partition management tools, this one offers more comprehensive disk and partition management features, such as resize/move partition to solve low disk space issues, create/delete/format partitions, clone disks, merge partitions, wipe data, and disk/partition conversion, all of which are completely free.

Step 1.Open EaseUS Partition Master and select “Change Drive Letter” from the context menu when you right-click the destination partition.

Then click “OK.” Step 3.Click the “Execute Operation” button in the top-left corner of the screen, review the modifications, and then click “Apply” to assign a new drive letter to the partition that was previously chosen.

Method 2. Change Drive Letter with CMD

If you don’t want to utilize a third-party tool, you may change the drive letter directly from the Command Prompt. This strategy is more appropriate for computer professionals. If you are a complete newbie, we strongly advise that you seek assistance from EaseUS free partition manager instead. Step 1.Right-click on the Start icon to bring up the context menu. Choose Command Prompt from the drop-down menu (Admin). Step 2.Log in as an administrator and type diskpart into the search box. Press Enter to proceed.

Step 4.Input the command list volume and press Enter.

Enter the following code: choose volume = 0 (change 0 with the drive number of your disk) and press Return.

Following the completion of these steps, you will have successfully added a new drive letter to your device.

You might be interested:  How To Update From Windows 8 To 10

How to Fix Disk Management Change Drive Letter and Paths Greyed Out Issue in 2 Ways

You can try the two techniques listed below to resolve the problem with Disk Management not being able to alter drive letter and paths on Windows 10.

Method 1. Check and Repair System Disk Error

If the system disk includes a file system problem or a number of damaged sectors, the Disk Management tool may be unable to perform its functions as expected. As a result, you can attempt to diagnose and correct the system disk fault that is preventing the Disk Management tool from functioning. EaseUS Partition Master Free is here to assist you once again. You may quickly and simply verify and repair the file system on your drive by selecting Check File System from the menu bar. Step 1: Run EaseUS Partition Master on your PC to begin the process.

Keeping the “Try to rectify problems if discovered” option selected in the Check File System box, click “Start” to begin the process.

When it is finished, click on “Finish.”

Method 2. Perform a System Restore to Repair Disk Management

After using the file system check method, you may want to try the next step, which is to execute a system restore – this will return Windows 10 to a prior healthy condition, which will allow Disk Management to function correctly. Step 1. Select “Start” “Settings” “Updatesecurity” “Recovery” from the Start menu. Step 2.In the Advanced starting section, select “Restart now.” Step 3: Press the Enter key. Select “Troubleshoot” from the drop-down menu, followed by “Advanced options” and “System Restore.” Choosing the appropriate system restore point and following the onscreen instructions to finish system restoration are steps 4 and 5.

Afterwards, you’ll be able to utilize Windows 10 Disk Management to alter the drive letter of devices as well as execute other actions.

To Sum Up

Alternatively, if you face the greyed out change drive letter and pathways problem in Disk Management, you may use one of the two other options to change drive letter – using EaseUS Partition Master Free or CMD – to change drive letter. EaseUS Partition Master is highly recommended for managing your disk or partition in order to optimize system performance.

Change Drive Letter and Paths Greyed Out FAQs

See related articles below for additional information on how to modify the drive letter and routes that are greyed off on Windows 10. Why am I unable to alter the drive letter and paths? The alter drive letter and pathways option being greyed out can occur for a variety of reasons, including the following:

  • No FAT or NTFS file system has been used to format the disk. The drive has been set to be write-protected. There are faulty sectors on the disk
  • This is a problem.

What is the best way to compel a drive letter change? If you are unable to change the drive letter and pathways on Windows 10 through the use of Disk Management, you may pick a dependable and free option to perform the task. EaseUS Partition Master Free is the first step. Download and run the program. Step 2: Right-click the target partition and select “Change Drive Letter” from the context menu. Step 3: To make the modification permanent, click the “Execute Operation” button. What is causing the lack of a drive letter?

In the File Explorer, you can see which drive letters have been assigned to which folders.

Is it safe to alter the drive letters on your computer?

If you are really concerned about data security, you might consider backing up your data before giving a new drive letter to your computer.

How to change Drive letter in Windows 11/10

It will be demonstrated in this post how to alter the Drive letter in Windows 11/10. Each hard drive partition is allocated a letter, such as C, D, E, and so on, by the operating system. If you wish to modify or rename a drive letter on your computer, you may use any of the straightforward methods described in this page.

Change drive letter in Windows 11/10

Changing or renaming a drive letter in Windows 11/10 may be accomplished in one of five methods, as shown in this post. These are the ones:

  1. Using the Command Prompt, Disk Management, PowerShell, Registry Editor, and Drive Letter Changer applications are all options.

1] Using Command Prompt

To change a drive letter using the CMD or Command Prompt window, follow the instructions outlined below:

  1. Command Prompt should be run as an administrator. Enter the diskpart command in the text box and press enter. To see a list of all hard drives, including their volume numbers and letters, use the list volume command. Run the command choose volume 5 on your computer. Substitute any other volume number for which you wish to modify the drive letter in lieu of 5. Executeassign letter=Lcommand and press enter. Replace the letter L with any other letter in the alphabet.

The drive letter will be changed instantly as a result of this. If the Drive letter is either missing or buried, you can attempt some simple solutions to resolve the problem and then see the newly allocated letter shown.

2] Using Disk Management

Enter the word diskmgmt in the Search box and press the Enter key. The Disk Management window displays a list of all available volumes or drives, together with information such as volume type, capacity, free space, and so on. Change drive letters and paths by right-clicking on a volume and selectingChange Drive Letters and Paths. A little box emerges on the screen. When you click on theChangebutton, another box will be shown.

You may now choose the new letter from the drop-down menu and confirm your selection by pressing the OK button. Finally, click on theYesbutton to confirm the modification has been made. Learn how to display drive letters first, followed by drive names, by reading this article.

3] Using PowerShell

In addition to changing drive letters, this option does not display the volume numbers and letters associated with each drive. As a result, you must first choose which drive letter you wish to alter. Following that, follow these steps:

  1. Open a PowerShell window with elevated privileges
  2. Then run the following command:

Get-partition -driveletter F | set-partition -newdriveletter L Get-partition -driveletter F | set-partition -newdriveletter L Make careful to change the letters F and L with your real drive letter and your new drive letter, as appropriate.

4]Using Registry Editor

A PC reboot is required after using this approach to effect the modifications. The steps are as follows: Using the Search box, type the word regedit to launch Registry Editor. Navigate to the keyMountedDevicesRegistry. Its route is as follows: HKEY LOCAL MACHINESYSTEMMountedDevices On the right side of the screen, you will see DWORD values such as DosDevicesD: for all of the hard drives, as well as their respective drive letters. Right-click on a value and select theRename option from the context menu.

For example, replace the value of DosDevices D: with the value of DosDevices L: and save the file.

5] Using Drive Letter Changer software

Drive Letter Changer is a free and portable utility that changes the drive letter of a computer. If you want to experiment with any freeware to alter drive letters in Windows 10, this program is a good option to consider. This tool also displays which letters have previously been allocated to other hard drives, as well as which letters are accessible or free to be assigned to other hard drives. Take a look at this utility and run the EXE file it contains to see its UI. It will provide a list of all of the available drives.

  • When you access that menu, you will be able to see a list of the drive letters that have been allocated to you as well as those that are available for use.
  • You may also use this program to access the Disk Management window, restart File Explorer, and do other operations.
  • Read this article for more information:How to alter Drive Icons in Windows 11/10.
  • He has been a Microsoft MVP for ten years (2006-16) and is a Windows Insider MVP.
  • Also, build a System Restore Point before making any changes to your system.

How to Change External Hard Drive Letters

A drive letter is assigned to an external hard disk once it is connected to a computer. This allows computer applications – and you – to recognize the drive. Hard disk drives are typically assigned certain letters by default, such as E:, J:, or G:, depending on the operating system. If you wish to keep the computer systems at your organization arranged in a specific way, you may modify the drive letters. You must be in into your computer as the administrator in order to modify the letter assigned to the external hard drive.

  1. To open Windows Explorer, click the Start button and then “Computer.” This will activate Windows Explorer.
  2. Make a note of the letter that was allocated to your external hard disk.
  3. Double-click “Computer Management” in the drop-down menu that appears when you click it in the list that displays.
  4. Select “Disk Management” from the drop-down menu, and then select the disk that corresponds to your external hard drive.

Select “Assign the Following Drive Letter” from the drop-down menu that appears after clicking the “Change” button. To assign a new letter to your external hard drive, select it from the drop-down menu and click “OK” to preserve your changes.

How to Change Drive Letter on Windows 10/8/7 without Effort?

In most cases, Windows assigns the drive letter for the system partition during the installation process. Typically, the system drive letter is C. The drive letter for any of your partitions is still assigned by Windows after installation, regardless of whether they are on a computer’s hard disk, flash drive, optical drive, USB drive, or card reader. Because of certain procedures, the drive letter may become inaccessible at times, and all partitions will be shown as Document, Game, and Music.

Alternatively, you may just choose to replace the original drive letter to a different one.

Matters need attention to change drive letter

1: By default, the hard disk that contains your operating system and boot files will be designated as the C: drive, and it will be where all of your applications will be stored. If you attempt to modify it, your computer will not be able to boot. 2. It is possible that your computer will skip over one drive letter and assign a different accessible drive letter to your card reader at random intervals. Perhaps your card reader has an additional slot, in which case it will have a different drive letter.

  • The letters A: and B: have traditionally been designated for floppy disk drive letters.
  • If you use software to alter the drive letter of a partition or disk, it is possible that it could cease operating.
  • Fortunately, with modern applications and apps, this is not an often asked subject.
  • 5.

How to assign a drive letter on Windows 10/8/7 with Disk Management?

When you have partition or disk difficulties, the built-in tools in Windows, such as disk management and diskpart, will be your first port of call for assistance. I’ll teach you how to assign a drive letter on Windows 10/8/7 using Disk Management in the sections below. Step 1. To open the ” Run ” window, press ” Win + R ” on your keyboard and typediskmgmt.mscin the box that appears. 2nd step: Select changeDrive Letter and Paths from the pop-up menu that appears after right-clicking the drive you wish to alter.

Notice:If you wish to delete the drive letter associated with your partition, you may do so by selecting ” Remove ” and following the on-screen instructions.

Furthermore, you are only permitted to use a drive letter that is currently available.

In disk administration, you have the option of changing the drive letter.

However, it is possible that it will not function properly at any point. Consider the following scenario: when you connect a hard drive to another PC, the disk may not display its drive letter, and you will be unable to assign a drive letter to it using Disk Management software.

How to change drive letter on Windows 11/10/8/7 effortlessly?

The built-in utility in Windows can assist you in changing drive letters in Windows. However, it is not without flaws. If you prefer a simpler method or want more sophisticated capabilities, you may utilize the free AOMEI Partition Assistant software. It includes all of the fundamental functionality, such as the ability to Create Partition, Delete Partition, and Shrink Partition. Furthermore, it will provide you with more complex capabilities such as Move Partition, Merge Partition, Convert to Primary Partition, Windows to Go creator, and so on.

Step 1: Download and install the AOMEI Partition Assistant.

Then, on the main page, selectAdvanced andChange Drive Letter from the context menu of the partition you just created.

Step 5.Confirm the following procedures by clicking the “Continue” button.

Summary

a built-in utility in Windows Change drive letter in Windows 10/8/7 is possible with the aid of disk management. However, it does not always function well. A third-party program such as AOMEI Partition Assistant may be a preferable option in this situation. With AOMEI Partition Assistant, even the most inexperienced user will find it simple to complete all of the tasks. Furthermore, it offers more complex functions, such as the ability to Move Partition, Resize Partition, and Convert GPT to MBR for Windows 11 upgrade, among others.

Leave a Comment

Your email address will not be published. Required fields are marked *