How To Change Public Network To Private Network In Windows 10

Contents

How to change network settings from public to private?

I came across the same issue today while connecting two Windows 10 PCs with an Ethernet crossover connection and it was the same solution. After assigning a static IP address to the interface using the Control Panel, Windows automatically assigned the interface to the “Unidentified network” profile, which is viewed as if it were a publicly accessible network. When accessing the interface’s Settings Panel, there was no way to adjust the setting for public/private access. I attempted to set the network profile to private using the PowerShell Set-NetConnectionProfile option (which can also be done using secpol.msc on Windows 10 Pro), but there were two issues: one, it did not persist after a reboot, and two, it creates a security risk if you ever connect to an unidentified public network.

Any suggestions?

During my investigation, I discovered that the “IP assignment” setting on the Settings Panel status page for the interface was set to DHCP rather than Manual, despite the fact that I had manually entered the IPv4 address in the IPv4 properties page of the Control Panel adapter settings.

Check one or more of the options and try again if necessary “If you leave the default gateway field blank, you will not be charged.

  • Windows built a new network profile named “Network 2” and assigned the interface to it as soon as you pressed the “Save” button.
  • The issue has been resolved.
  • In addition, because the interface had a lower binding order than the Ethernet interface, it was necessary for me to manually establish a higher metric on the Ethernet interface in order to prevent Windows from utilizing the fake gateway as its preferred route for the IP address of 0.0.0.0.
  • One is the necessity for a gateway in order to enter a manual IP address in the Settings Panel.

Finally, unless you make the Settings Panel happy, you may be stuck with a “Unidentified network” relationship for the foreseeable future (or maybe find a registry hack).

How to Change Your Network Profile to Public or Private in Windows 10

When using Windows 10, it is simple to configure your network profiles for wired or wireless devices to be either public or private. Find out how you may accomplish this with the help of your network. When you join to a wired or wireless network in Windows 10, there are two sets of default security and sharing options: public and private. If you connect to a public network, the default security and sharing settings are the same as they are in Windows 10. The names of these two options are rather self-explanatory in nature.

That much is self-evident.

And how do you make the transition from one to the next?

Set Your Network Profile in Windows 10 to Private or Public

When you initially connect to a network, Windows will prompt you to select the type of network you want to use as well as the network settings you want to utilize. You have the option to alter it if you don’t recall doing it or if you change your mind about forming a network. In Windows 10, there are two types of networks: public and private. It is generally accepted that the settings are more restricted when a network profile is set to “public.” Other devices connected to the same network will not be able to see your PC.

The assumption made by Windows 10 when you are connected to a “private” network is that you are on a trusted network to which only you and your family members have access.

Use of Homegroups allows you to share printers and files with other computers on your network if you have them configured correctly.

By default, both public and private networks have firewall configurations that are quite restrictive.

How to Change a Wireless Network to Private or Public

If you want to go from a public network to a private network, or vice versa, you must first connect to your current network. This may be accomplished by selecting the Network symbol from the Notification area’s available icons. After selecting the network, you must connect to it. After you’ve connected, choose it and then clickProperties on the menu bar. You can choose whether to make your Network profile public or private from this page. Choose the one that is most appropriate for your surroundings.

How to Change a Wired Network to Public or Private

You may modify the network profile for a wired network by going to StartSettingsNetworkInternetEthernet and then clicking the network adapter you wish to change. Then select the desired profile from the drop-down menu.

Customize Public and Private Network Settings

You have the ability to customize the parameters for your public and private networks. In this way, you may, for example, make your machine discoverable on public networks (which is not advised) or deactivate file and printer sharing on a private network. Open StartSettingsNetworkInternet, and then clickSharing choices under the Change your network settings section. Following the selection of Private or public, choose the radio box for any desired settings such as turning off network discovery, enabling file and printer sharing, or gaining access to homegroup connections.

In addition to this post, we have articles on How to Create and Join a HomeGroup in Windows 10andConnect Windows 10 to Wired, Wireless, and P2P Networks that will help you learn more about managing networks in Windows 10.

For those who operate with a combination of Macs and Windows, our guideHow to Network Windows 10 and OS X and Share Files will be of assistance.

How to Change a Wi-Fi Network From Public to Private in

While there are a variety of reasons for which you might wish to convert from a public to a private network, the most important one is to prevent your home or workplace network from being compromised by unwanted devices. Because of the large number of Wi-Fi-capable devices available, changing your network settings is a simple operation. This post will demonstrate numerous methods for changing your Wi-Fi network to private in Windows 10, including the use of PowerShell and the Registry Editor, among others.

Switch From Public to Private Network Using Wi-Fi Settings

Using the Wi-Fi settings, you may switch your network from public to private mode:

  1. Identify and click on the Wi-Fi network icon, which is located near the upper-right corner of the taskbar. Proprieties can be found under the Wi-Fi network that you’re currently connected to
  2. SelectPrivate from the Network profile drop-down menu.

Switch From Public Network to Private Using Ethernet Lan Settings

Using the Ethernet Lan settings, you may convert your network from a public to a private network:

  1. Start by selectingSettings from the Start menu. Alternatively, you may pick theNetworkInternetsettings option from here. ChooseEthernetfrom the drop-down option on the left. Select the name of your connection by clicking on it. SelectPrivate

Switch From Public Network to Private Using the Registry

Note: Because a single error in Re gistryEditor has the ability to cause a complete system failure, it is recommended that you create a backup in preparation.

  • Once you’ve launched the Registry Editor, select FileExport from the File menu to save the backup in a safe location. In the event that something goes wrong, you can restore from the backup.

Using the Registry Editor, you may change the location of your network from public to private:

  1. To launch a Run box, pressWindows + R
  2. Enter the command ” regedit” and press Enter. From the left pane of Registry Editor, navigate to the following key: HKEY LOCAL MACHINESOFTWAREMicrosoftWindows NTCurrentVersionNetworkListProfiles
  3. From the left pane, expand theProfileskey
  4. Click on the subkeys to discover the “ProfileName” that matches your current network connection’s name
  5. Once you’ve found the right subkey, in the right pane, double-clickCategoryand edit theDWORDto the following: Public: 0, Private: 1, Domain: 2
  6. To apply the new network location, reboot your computer

Switch From Public Network to Private Using PowerShell

To use PowerShell to change your network settings from public to private, you must first provide Administrator access to PowerShell:

  1. Select Start and then type ” CMD ” into the Search Bar
  2. Then click OK. Right-click on Command Prompt and selectRun as administrator from the context menu. It is possible that you may be required to input the administrator’s login and password in order to grant admin rights. Then click Enter after typing:net user administrator /active:yes

PowerShell should now be launched, followed by the following commands:

  1. To view the name and attributes of the current network connection, copy and paste or type the following command into your browser’s address bar. Get-NetConnectionProfile, followed by the Enter key
  2. To switch your network’s location from public to private, enter the following command, replacing “NetworkName” with the name of your network: To change your network’s location from public to private, enter the following command, replacing “NetworkName” with your network name: Set-NetConnectionProfile -Name “NetworkName” -NetworkCategory Private
  3. Set-NetConnectionProfile -Name “NetworkName” -NetworkCategory Private
  • To return your network’s location to the general public, follow these steps: Set-NetConnectionProfile -Name “NetworkName” -NetworkCategory Public
  • Set-NetConnectionProfile -Name “NetworkName” -NetworkCategory Public

Switch From Public Network to Private Using Local Group Policy Editor

Using the Local Group Policy Editor, you may convert a public network to a private network.

  1. By selecting Start, you will be sent to the Local Group Policy editor. then press the Enter key after typing ” gpedit.msc ” into the Search box
  2. Select Computer ConfigurationWindows SettingsSecurity SettingsNetwork List Manager Policies from the drop-down menu. Then, double-click on Unidentified Networks to bring up the menu. ThePrivateoption should be selected in theLocation typebox.

Private and Public Network FAQs

To make changes to your public and private network settings, follow these steps: 1. From the taskbar, select the Start button. 2. Next, go to SettingsNetworkInternet and click on it. The Change advanced sharing options option may be found in the Advanced network settings section. Select the radio button for your desired settings, such as turning off printer sharing, by expandingPrivateorPublic in the dialog box.

Why Would You Want Your Network Set to Public?

If you want to connect to Wi-Fi in a public area, such as a coffee shop or a library, you would configure your network to Public. Even if you’ve configured a Homegroup, your computer will not appear to other devices during that time period, nor will it attempt to discover other devices on the network. In addition, the file-sharing discovery capability will be disabled by Windows.

You might be interested:  How To Recover Deleted Files In Windows 10

Why Would You Want Your Network Set to Private?

Private networking is appropriate for use in a network setting such as a home or workplace network that contains only trusted devices with whom you may need to communicate. Discovery features are enabled, and your computer is visible to other computers on the network, allowing you to share files, media, and other networked features with other computers on the network.

Can I Change Network to Private Using Homegroup?

Homegroup does not provide a function that allows you to make modifications to your network connection. While going through the Homegroup configuration process, you may be prompted to adjust the network privacy settings on your computer. This may be accomplished either the Wi-Fi settings or the NetworkInternetsettings option, depending on how your internet connection is configured (wireless or ethernet cable). To make your network private, go to the Wi-Fi settings and select “Private Network.” In the taskbar, look for the Wi-Fi network icon, which is located in its upper-right corner.

SelectPropertiesfrom the Wi-Fi network to which you are currently connected.

SelectPrivate from the Network profile drop-down menu.

Go to the Start menu and selectSettings. 2. Select theNetworkInternetSettings option from the drop-down menu. 3. SelectEthernet from the drop-down menu. 4. Select the name of your connection from the drop-down menu. SelectPrivate from the drop-down menu.

How Do I Create a Homegroup in Windows 10?

1. In the Search box on the taskbar, type “homegroup,” and then click on the Homegroup button. 2. Select the option to “Create a homegroup” and then “Next.” 3. Select the devices and libraries that you want to share with the homegroup, and then click Next to continue. Take a note of the password that appears on your screen; this will grant access to other computers in your network. 5. Finally, click onFinish. To add more machines to your Homegroup, follow these steps: 1. Once more, put ” homegroup ” into the Search field and then click onHomegroup.

  • 2.
  • 4.
  • 5.
  • To share a specific file or folder, use the following syntax: 1.
  • 2.
  • 3.
  • Choose a Homegroup option to share with your Homegroup members, such as libraries, by clicking on it.

To change the degree of access to a folder or file, go to the Share tab, then Homegroup viewor Homegroup (view and edit).

To share or stop sharing your printer, follow these steps: 1.

2.

Click onSharedorNot sharednext to PrintersDevices to toggle between shared and not shared options.

Then it’s time to finish.

How Can I Keep My Internet Connection Secure?

For your home network, there are four things you should take into consideration to assist prevent unwanted people from obtaining access to it: Change the names of your routers and networks. You should update the default username and password that comes with your router after you have configured it for the first time and it has been successfully tested. If you leave the username and password that came with your router intact, your Wi-Fi will be freely available to anybody who knows what they are.

  • Using a combination of numbers, special characters, upper and lowercase letters, and ensuring that it is unique; do not repeat passwords are some of the best password practices.
  • When a vulnerability is discovered, router manufacturers will immediately provide an update to the router firmware.
  • Enable Encryption on your computer.
  • Navigate to the security settings on your router’s configuration page.
  • Locate the WPA2 personal setting in the next step.
  • If that option isn’t available, choose WPA Personal instead.

4. Select the AES encryption type from the drop-down menu. Enter the password or network key; this password is separate from the router password and will be used to join all of your devices to the Wi-Fi network you have created.

Securing Your Wi-Fi Network

Windows 10 provides us with the ability to adjust our internet connection settings between public and private, allowing us to browse the internet in public locations while still maintaining our privacy at home or in the workplace. A variety of approaches can be used to bring about the transformation. Knowing how to convert your network from public to private as well as other methods to improve the security of your internet connection, tell us about the technique you used to make the change. Did you use the Wi-Fi/Ethernet Lan settings or did you use command prompts?

Please let us know in the comments area if this is the case.

How to Change Windows 10 Network to Private

  • Wireless, pick the Wi-Fi network icon from the drop-down menu. Using the right-click menu on theEthernet network icon, choose PropertiesNetwork profilePrivate
  • A network that is open Configuration of the internet PropertiesProfile of a network Private
  • On a private network, Advanced Sharing Settings can be used to configure network discoverability, file and printer sharing, and other features.

When you connect a Windows 10 PC to the internet for the first time, a prompt appears asking you to pick the type of network you wish to use. If you choose to use a wireless network, the prompt disappears. When connecting using Wi-Fi, a wired Ethernet connection, or a USB modem, Windows utilizes this option to protect the Windows PC and share permissions. You have the option of making your connection public or private. This decision is influenced by your location and the activities you wish to do on the network.

What Are Public and Private Networks on Windows 10

A trustworthy network at home or at business is referred to as a private network. Devices connected to the same network may view and communicate with one another, as well as share files and printers. In social settings such as airport lounges and coffee shops that include public Wi-Fi hotspots, a public network is appropriate. Other devices on the network will not be able to see your computer, and file and printer sharing will not be available. When it comes to security on public networks, Windows is more stringent.

However, you have the option to modify this setting at any moment.

How Do I Change From Public to Private Network in Windows 10?

When connecting to an internet connection for the first time, it’s possible that you choose a public profile for your network configuration. Windows, on the other hand, allows you to switch the network profile from public to private at any moment (and vice-versa). For example, if you are browsing from a public Wi-Fi hotspot, you should switch to the Public network profile. Once you’ve returned home, switch to the trusted Private profile.

Change a Wireless Network to Private

Consider the following scenario: Windows is now connected to a public network, and you would like to change this connection to a private network.

  1. Select the Wi-Fi network icon, which may be found on the right side of the taskbar. SelectPropertiesunder the name of the Wi-Fi network to which you’ve joined
  2. Select the Private radio button from the drop-down menu.

Tip:

You can also access the radio buttons from the StartSettingsNetworkInternetStatusSelect the name of the connection menu option.

Change a Wired Network to Private

The following procedures should be followed in order to secure a wired Ethernet as a private network.

  1. Then, from the left sidebar, selectStartSettingsNetworkInternet
  2. And last, selectEthernet. On the Statusscreen, you can also pick thePropertiesbutton, which is located under the Ethernet connection. Choose the name of the Ethernet connection from the drop-down menu on the right. When you wish to convert from a public network to a private network, pick the radio button forPrivate under Network Profile.

Tip:

Use the right-click menu to access the radio buttons when you’re working on the Ethernet network icon in the taskbar.

Select thePropertiesbutton for the Ethernet connection on theStatusscreen after clicking onOpen NetworkInternet settings on theStatusscreen.

Customize Advanced Sharing Settings for a Private Network in Windows 10

Network discovery with file and printer sharing is available in both public and private profiles, with distinct choices for public and private profiles. These choices provide you greater control over what you may and cannot restrict or allow over your network connection. For example, when you connect to a Private network, Windows automatically turns on network discoverability. The Network and Sharing Center in Windows 10 provides the option to turn off network discoverability if you so want. Both network profiles may be configured using the same settings screen, which also allows them to activate or disable file and printer sharing in Windows 10.

FAQ

  • Is it better to have my network configured to public or private? If you wish to connect with other devices on the network, only then should you make a network private (such as printers). Otherwise, make your network accessible to the general public in order to secure your machine from unwanted intrusion. What is causing me to be unable to view other machines on my network? Unless network discovery is enabled, you will not be able to view any other devices on the network. Although network discovery is enabled, if you are unable to view any other machines on the same network despite this, it is possible that you need to enable file and printer sharing in your firewall settings. What is the best way to conceal my Wi-Fi network? In the event that you do not want anyone to be able to see your network at all, you may conceal your SSID by login into your router and navigating to the wireless network settings page. Except for you, no one else will be able to see your network name

Thank you for informing us about this!

How to Change Public to Private Network Profile in

Similarly to Windows 8, Windows 10 allows you to designate your computer’s network connections as either PublicorPrivate or a combination of both. Depending on the sort of connection Windows believes you have, the way your computer interacts with other devices on the network will differ. The difficulty is that when you initially join to a network, Windows assigns your network connection either a public or a private profile, which might lead to users unintentionally selecting the incorrect label.

In any instance, using the improper network profile for your connection may result in security concerns or the inability to utilize certain Windows functions as you anticipate.

What is a Public and Private Network in Windows 10?

Private connections are meant for use in the house or on a closed business network, in other words, for settings in which you are familiar with and trust all of the other devices to which your PC may be linked. While the method in which Windows treats public and private network locations may be customized, by default, private network connections provide capabilities such as device discovery, printer sharing, and the ability to view your PCs in the network browser, among other options. On the other hand, public network locations are intended to cover any situation where you don’t know and trust all of the other devices, such as coffee shops, airports, or even office networks that do not adhere to best practices in terms of security and allow visitors and employees to connect to the same network at the same time.

This does not preclude you from connecting to other devices or sharing files on a public network; it only means that Windows will not automatically do these tasks for you, and you will be required to connect to and authenticate with another device manually.

IdentifyingNetwork Profile in Windows 10

To determine if your network connection is presently categorized as public or private by Windows, navigate to SettingsNetworkInternet and click on the Networking tab. Make sure you’ve selected theStatustab option in the sidebar, and you’ll see a list of your currently active network connections on the right side of the screen. When we use our Ethernet connection as an example, it is recognized as a public network. Nonetheless, given that this PC is placed in an office where we previously utilized a closed network, it is preferable to alter its designation to that of a private network.

How do I change from Public to Private Network in Windows 10?

To go from a public to a private network location (or vice versa), return to the NetworkInternet settings page mentioned above and search for your network connection in the sidebar on the left of the screen. Because we are utilizing a desktop PC with a wired Ethernet connection in our example, we will selectEthernet as the connection type. Look for the term Wi-Fi while looking for laptops or desktop computers with wireless cards. Keep in mind that Microsoft has made and will continue to make major changes to Windows 10 over time.

  • Article from TechJunkie that may be of interest: How to Locate Your Windows 10 Build Number (Quick Tip) You’ll get a list of all of your Ethernet and Wi-Fi connections when you choose the proper item for the appropriate kind (in our example, we only have a single connection).
  • You’ll see a section titled Network Profile at the top of the page.
  • In our scenario, we’ll switch from the Public to the Private mode.
  • If you are unable to locate the option to change your network, try the following: To connect to the internet, click on the WiFi symbol, which is situated at the bottom-right corner of your computer screen.
  • Now, to transition from a public to a private network, follow the steps outlined above.

How to Change from Public to Private Network in Windows 8, 8.1, and 7

If you are using Windows 8.1, you need follow these steps:

  1. Start by selecting Change PC Settings from the Charms bar at the bottom of your screen. Then select Network from the drop-down menu. Identify the proper network connection from the list of available network connections, such as wireless (if you are using WiFi) or ethernet
  2. In the event that you are moving to a private network, turn on theFind devices and contentfeature, which you will want turned off for a public network and ON for a private network.
You might be interested:  How To Open Pages File On Windows 10

Follow these steps to install Windows 8 on your computer:

  1. First, select Network and Sharing Center from the drop-down menu. Following that, you can switch the network from private to public or from public to private
  2. And Change advanced sharing options may be found in the left-hand navigation menu. Change advanced sharing settings for a private network should have the following configurations for it: Allow Windows to handle homegroup connections by turning on network discovery, enabling file and printer sharing, and allowing Windows to identify available networks. Turning off network discovery as well as file and printer sharing should be done for a public network as outlined above. Then return to the Networking section of the Settings menu. Activate or deactivate sharing
  3. After that, choose Yes if you want your network to be considered as a private network, and No if you want it to be handled as a public network, which will complete the configuration changes you are making

Please follow these instructions if you are still running Windows 7.

  1. On your Windows taskbar, choose the Network icon and then click on it. Select’Open NetworkSharing Center’from the drop-down menu. Choose ‘View your active networks’ from the drop-down menu that opens, and then click on the hyperlink under the network that displays (it may say something like ‘Home Network’ or ‘Work Network’). You may select your preferred network type from a drop-down menu that displays the various alternatives. Alternatively, click on the’Help me choose’hyperlink at the bottom of the page for further information.

Do you have any suggestions about how to transition your network from private to public, or from public to private? If this is the case, please let us know by leaving a comment below!

How to Change Windows 10 Network Profiles the Easy Way

What is the difference between Windows 10 public, private, and domain network profiles, how do I change my profile, and why should I care are all questions that you may be asking yourself.

Insecure public networks are everywhere and so are the bad guys. Windows 10 network profiles offer valuable built-in protection if used correctly. A proper Windows 10 network profile goes a long way towards helping you to apply basic computer security measures for free.

Prerequisites

In order to follow along and put what you are learning into practice, you will require a computer running Windows 10 or above. Additionally, the computer should be linked to the internet.

Understanding Network Profiles in Windows 10

Making a connection to a public network without disclosing your data or revealing your equipment is particularly perilous since you have no way of knowing who or what could be connecting. If you have a home or office network, you may wish to share files and printers with other devices and people, on the other hand. Your computer is at danger of being exposed to possible threats every time you connect to a WiFi network or an Ethernet network connection. You can rapidly adjust the security and file-sharing settings in Windows 10 by using network profiles.

  • Public– ThePublicprofile should be used in public places such as the library or a coffee shop. When you create a public profile, your computer is concealed and cannot be accessed by other computers. Other computers on a public network will not be able to share files or printers with your computer since it is not connected to one. Private– ThePrivateprofile should be used when connecting to a private network at home or at another trustworthy location. A private profile allows you to make your computer accessible to other computers, allowing you to share files and printers with other computers. Domain– When your machine is a part of an active directory domain, theDomainprofile is normally applied. In this category are a large number of business PCs, and this profile comprises settings that have been specified by domain administrators.

Each profile has its own set of security, firewall, and sharing options, which are applied to a network connection through the use of a profile manager.

Viewing Network Profiles

As a precaution, be certain that you are connecting to a network using the right network profile. By selecting Control Panel Network and Internet Network and Sharing Center from the Windows 10 start menu, you may view the profile of any network connection that you are currently using. Using theView your active networkswindow, which can be found at the bottom of this page, you can see under theNetworkheading which network profile is presently in use, as well as what Access type and Connections have been allocated to that network profile, as shown below.

Setting Network Profiles in Windows 10

The ability to check the network profile your computer is currently using can be handy, but there are instances when you will need to alter it. Network profiles may be configured with the WindowsSettingsapplication or through the use of PowerShell scripts.

Configuring a New Network Connection

When you first join to a new network, you will receive a popup dialog box, as shown below, asking if you want your PC to be discoverable on the network. If you choose yes, you will see the following dialog box. For the time being, Windows does not have a network profile for this device installed on it. This dialog box is the first opportunity you’ll have to assign a network profile to the newly discovered network connection you’ve made. Choosing Yes will cause Windows 10 to shift the network to a private connection, as seen below.

A new network dialog has been added.

The profile for the Publicnetwork is immediately applied.

In the default setting, unidentified networks are placed in a public profile.

Changing an Existing Network’s Network Profile

It is possible that a network connection has applied a network profile that is different from the one that was intended.

Perhaps you need to modify the profile that is already in use in order to enable for file and printer sharing or to make your machine discoverable through a network connection.

  1. In the Windows 10 Search box, type “Network Status,” and then click on the result that appears below

How to find and open the Network Status system settings page in Windows 10 by using the Search Box. 2. Next, choose thePropertiesbutton next to the network connection that you wish to alter and click OK. Selecting a network connection in Network Status is a simple process. Last but not least, pick theNetwork Profilethat you would like to apply to this network connection. Changing the network profile associated with a network connection. The profile update takes effect immediately, and you may then exit the settings page without further action.

Using Windows PowerShell

When it comes to changing a network profile, what if you don’t want to go through the trouble of searching through Windows settings? It is possible to modify a network profile using Windows PowerShell in this situation. Windows PowerShell is a command-line interface that may replace the Windows Settings program. PowerShell provides a straightforward technique for establishing profiles for people who are comfortable working from the command line. There are two methods for examining and updating network profiles in PowerShell.

  • Let’s go through a basic example of changing network profiles with PowerShell, this time utilizing Windows 10 to go from a public network to a private network profile.
  • The cmdletGet-NetAdapterlists the properties of each of the network adapters installed on your machine.
  • (Get-NetAdapter).
  • The following is a list of all network connection interface aliases.
  • You may obtain theNetworkCategory property by using the command below.
  • (Get-NetConnectionProfile -InterfaceAlias ‘Ethernet0’; Get-NetConnectionProfile).
  • Finally, using the Set-NetConnectionProfile cmdlet, convert the Windows 10 network profile from a private profile to a public profile by executing the command below.
  • You may double-check that the profile has been updated by executing the following command a second time.

NetworkCategory As demonstrated in the screenshot below, theEthernet0network profile has been modified to make advantage of the Publicprofile. This test checks to see if theEthernet0interface has been modified to use the Publicprofile.

What about Domain Network Profiles?

If your machine is connected to an Active Directory domain, as is frequently the case in corporate situations, you will discover that changing domain network profiles is not possible at this time. The PC’s network profiles are managed by Group Policy, which is a mechanism for customizing computer settings from a central location. It is possible that you may see an error if you attempt to modify the profile through Windows PowerShell and your domain has been configured to prevent network profile changes.

(Get-CimInstance -ClassName Win32 ComputerSystem -ClassName Win32 ComputerSystem) PartOfDomain Attempt to modify the Network Profile of a domain-connected machine by running Set-NetConnectionProfile -NetworkCategory Public -VerboseGroup Policy preventing network profile modification.

Next Steps

Windows 10 includes a number of built-in security measures that are useful. Change the network profiles on Windows 10 from public to private is only one of the numerous security measures that are accessible to you. Experiment using PowerShell for controlling and performing Windows Defender scans. You might also be interested in learning more about how to operate the Windows Defender Firewall using PowerShell.

How to change Windows 10 network location from Public to Private

Having trouble browsing other computers or printers on a local network on a Windows system has happened to you before. It is acceptable to behave in this manner when using a public network, such as an airport or a hotel Wi-Fi connection. However, even if you are at home, Windows may inexplicably assign the Public network type to your computer on occasion. Yes, Network Location Awarenessmay make an incorrect assumption. Fortunately, the straightforward remedy generally takes less than 30 seconds, as demonstrated by the post below, which was written entirely on mySuperServer Workstation.

Press the Windows key + R on your keyboard, type winver, and then press the Enter key.

  • A simple fix for versions 1909,1903,1809,1803, 1709,1703,1607,1511, or 1507 of the operating system

Windows 10 October 2020 Update, aka version 20H2 OS Build 198042.685

Usage: UI=en-US rs=en-US ad=US WindowsUpdating: 19042

Windows 10 May 2020 Update

Since all prior Windows 10 releases, it has been significantly easier; thank you, Microsoft! It’s also a great touch that the remedy is the same in 1709, 1803, 1809, 1903, and 1909, regardless of the year. Detailed instructions, including screenshots, are provided below:

Fix for Wi-Fi Network Connections

  1. Click on the tiny Wi-Fi network icon (beams icon) in your system tray (located at the bottom-right corner of your screen, near your clock)
  2. Left-click onPropertiesbelow the network item near the top of the menu, such asPAB’s iPhonepictured in this example, and enter whatever your Wi-Fi network’s name is, also known as the SSID
  3. At the top of the menu, underNetwork profile, change it fromPublic toPrivate
  4. And finally, click

Fix for Wired Network Connections

  1. To access the network menu, left-click the tiny network icon (computer screen symbol) in your system tray at bottom-right (near your clock)
  2. To access the network menu, left-click the first network item that appears near the top of the menu, such asNetwork Connectedor a similar network name
  3. To access the network menu, left-click Change the Network profile setting from Public to Private at the top of the page.

Windows 10 Creators Update, Version 1703 Build 15063

See the following screenshot of the Network Location in Windows 10 Version 1607. All versions since 1607 have used the same fix, with menus that look virtually identical and include almost identical wording: Make this computer easily discoverable.

Allow other PCs and gadgets on this network to discover and interact with your computer. We recommend that you turn this on for private networks at home or at work, but turn it off for public networks in order to keep your information safe and secure.

Fix for Wi-Fi Network Connection – Video

This brief video loop explains every step involved in setting up Wi-Fi networks. The playback controls are revealed when the mouse is moved over them. Windows 10 Version 1607 Build 14393 is the only version that is supported.

Fix for Wired Network Connection – Video

This short video loop walks you through every step of setting up Wi-Fi networks. Highlight the playback controls with your mouse to reveal them. Application only suitable to Windows 10 Version 1607 Build 14393 and above.

Fix for Wi-Fi Network Connection – Instructions

Step 1: Right-click on the Wi-Fi icon in the System Tray and select Properties. Step 23- choose the ‘Connected’ Wi-Fi connection at the top of the list, then select ‘Properties’ from the submenu that appears. In Step 4, under the heading “Make this PC discoverable,” drag the slider to the ‘On’ position.

Fix for Wired Network Connection – Instructions

the Wi-Fi icon can be found in the System Tray by selecting it in step one. In the top-right corner of the list, click on the ‘Connected’ Wi-Fi connection to bring up a submenu. From there, select ‘Properties’ from the drop-down menu. In Step 4, under the heading “Make this PC discoverable,” slide the slider to the right until it reads “On.”

Jul 12 2016 Update

Note that these instructions are the same for Builds 15063, 14393, 10586, and 10240; for more information on Windows versions, check the table below. For your convenience, we’ve included an archive of previous versions of the software. Yes, Microsoft entirely redesigned the user interface in Version 1607, as previously described.

Table of Contents – 4 Methods

  1. HomeGroup Control Panel- the quickest and most effective remedy for the majority of people (Video) HomeGroup Control Panel- the quickest and most effective remedy for the majority of people (Screenshots)
  2. Toggle between finding devices and viewing content (Video) Find devices and contenttoggle – Wired (Video)
  3. HomeGroup Troubleshooter (Video)
  4. Find devices and contenttoggle – Wireless (Video)
  5. Run gpedit.msc, which requires administrative privileges (Video)
You might be interested:  How To Extract Rar Files On Windows 10

Change from Public Network to Private Network (Windows 10)

Every step is demonstrated in a 30-second video loop. The playback controls are revealed when the mouse is moved over them. This is applicable to all recent Windows 10 versions, including Summer 2015’s Build 10240 and Fall 2015’s Build 10586, among others.

1. HomeGroup Control Panel – easiest fix that works for most (Screenshots)

The Start menu may be accessed by selecting the Windows symbol in the lower left corner of the screen. Simply begin entering “homegroup” into the search bar and then pick “HomeGroup” from the search results. Select “Change network location” from the drop-down menu. “Yes” should be selected for Discoverable. Right-click the WiFi or wired network icon in the system tray and select Properties. Select “Open Network and Sharing Center” from the drop-down menu. Check that the network is shown as “Private network” before closing the window.

2. Find devices and content toggle – WiFi (Video)

Another approach to resolving the WiFi wireless network connection issue on Windows 10 is presented here.

2. Find devices and content toggle – Wired (Video)

Another approach to resolving the problem with the wired network connection on Windows 10 is presented here.

3. HomeGroup Troubleshooter (Video)

It is possible that this patch will place you on a private network type in the future, if you connect to an unknown (new) network after doing this fix. You should proceed at your own risk:

  1. Choose Start > Run > Gpedit.msc and press Enter
  2. Choose Computer Configuration > Windows Settings > Security Settings > Network List Manager Policies
  3. Double-click on Unidentified Networks/change the value of the value. Click OK to exit the window after changing the location fromNot configured toPrivate.

If you’re interested in learning more about the security implications of network location in Microsoft Networking, go here. See also Microsoft’s Choosing a Network Location for further information. The following is the original blog article from January 5, 2015 (Windows 10 Insider Preview / Beta).

History of the solution for various Windows 10 Insider Preview builds

  • See, for example, Build 9926. The following is an update from January 25, 2015. With the release of Build 9926 on January 23, 2015, it became clear that Microsoft is still rearranging things quite a bit in its operating system. A description of the new procedure for switching from Public to Private mode on build 9926 is provided. Take a look atBuild 10041. The following is an update from March 26, 2015. Yet another update was made on March 18, 2015, with the release of the Windows 10 Technical Preview ISO March Update Build 10041, which was released on the same day. SeeBuild 10074 for further information. Updated on May 1, 2015
  • See below. See, for example, Building 10130. Updated on June 15, 2015
  • See below. See, for example, Build 10159. Updated on July 3, 2015
  • See below. SeeBuild 10240 for further information. The following is an update from July 29, 2015. This is the “actual” release, which became generally available on July 29, 2015, according to the company. Since then, the mechanisms for changing network types appear to have stayed unchanged.

Jan 25 2015 Update

With the release of build 9926 on January 23, 2015, it’s become clear that Microsoft is still rearranging things quite a bit in its operating system.

As of version 9926, this is the updated way for switching from Public to Private mode: When a wired or wireless connection is stalled in the Public mode:

  1. Press the Windows key (located on your keyboard)
  2. And if you type Homegroup, a “HomeGroup” menu will display, hit enter
  3. If you click or touch on the “Change network location” link, a “Change network location” link will emerge. “Do you wish to identify PCs, devices, and content on this network and automatically connect to devices such as printers and televisions?” will question the “Networks” dialogue box, which will slide in from the right and appear after that. “We strongly advise you to do this on both your home and business networks.” “Yes” should be selected by tapping or clicking on it.

That’s all; you’ve successfully entered the appropriate private network mode.

Mar 26 2015 Update

Here’s a somewhat different approach to accomplishing the same goal in build 10041.

  1. Press the Windows key (on your keyboard) or the Start button
  2. Type HomeGroup, and “HomeGroup” will appear at the top of the screen and be chosen
  3. Press Enter
  4. Pick the blue link “Change network location”
  5. Press Enter. When presented with “Do you wish to locate PCs, devices, and content on this network, and automatically connect to devices like as printers and televisions?” touch or click on “Yes” to confirm. We recommend that you do this on both your home and work networks.”
  6. Optionally, you can confirm by right-clicking on the network tray icon, then left-clicking “Open Network and Sharing Center”
  7. Notice that it now says “Private network”
  8. And finally, you can confirm by right-clicking on the network tray icon, then left-clicking “Confirm”

May 01 2015 Update

Here’s a somewhat different approach to accomplish the same goal in build 10074, for those who find that searching for HomeGroup (as demonstrated above in build 10041) just does not work. It’s probable that some A / B testing is taking place here, as stated at this location on Windows Weekly 411. The strategy outlined below will function without the need for a search engine.

  1. Start by clicking or tapping on the Start button. Networking
  2. Internet
  3. Ethernet
  4. HomeGroup
  5. Configuration
  6. Change the location of the network
  7. “Do you wish to discover PCs or devices?” pick Yes from the drop-down menu

June 15 2015 Update

Take a look at what Jason has to say about build 10130 in the chat box below. It was necessary for me to run the home group troubleshooter, which provided me with the opportunity to install the repair that allowed me to set my network to private. Consequently, I created a video tutorial and documented the process step by step.

  1. Press the Windows key (on your keyboard) or the Start button to begin the process. When you write HomeGroup, the word “HomeGroup” will appear at the top of the screen and be chosen
  2. Then hit Enter. “Find and solve issues with the homegroup”
  3. “Next”
  4. “Troubleshoot network difficulties”
  5. “Explore other choices”
  6. “Find and fix problems with the homegroup”
  7. Close the “Additional Information” window
  8. When the “Change the network location to Private” window appears, pick “Apply this repair”
  9. When the “Troubleshooting has been finished” window appears, select “Close”
  10. When the “Troubleshooting has been completed” window appears, select “Close”

July 03 2015 Update

For build 10159, it’s very straightforward once more, returning to the same technique that we used to do on build 10041 all those years ago:

  1. Press the Windows key (on your keyboard) or the Start button
  2. Type HomeGroup, and “HomeGroup” will appear at the top of the screen and be chosen
  3. Press Enter
  4. Pick the blue link “Change network location”
  5. Press Enter. When presented with “Do you wish to locate PCs, devices, and content on this network, and automatically connect to devices like as printers and televisions?” touch or click on “Yes” to confirm. We recommend that you do this on both your home and work networks.”
  6. Optionally, you can confirm by right-clicking on the network tray icon, then left-clicking “Open Network and Sharing Center”
  7. Notice that it now says “Private network”
  8. And finally, you can confirm by right-clicking on the network tray icon, then left-clicking “Confirm”

July 29 2015 Update

We have the same approach that we had for builds 10041 and 10159, which is the following, and it is applicable to build 10240, which is now broadly available:

  1. Press the Windows key (on your keyboard) or the Start button
  2. Type HomeGroup, and “HomeGroup” will appear at the top of the screen and be chosen
  3. Press Enter
  4. Pick the blue link “Change network location”
  5. Press Enter. When presented with “Do you wish to locate PCs, devices, and content on this network, and automatically connect to devices like as printers and televisions?” touch or click on “Yes” to confirm. We recommend that you do this on both your home and work networks.”
  6. Optionally, you can confirm by right-clicking on the network tray icon, then left-clicking “Open Network and Sharing Center”
  7. Notice that it now says “Private network”
  8. And finally, you can confirm by right-clicking on the network tray icon, then left-clicking “Confirm”

Jan 03 2016 Update

These network location modification methods are also compatible with the following versions of Microsoft Windows: Microsoft Windows Version 1511 (OS Build 10586.36) What kind of windows do you have? Simply hit your Windows key + R, type “winver,” and then press your “Enter” key to finish.

Jan 08 2016 Update

Animated GIFs have been replaced with smaller and better-looking autoplay HTML5 video, which includes audio (which is muted by default) and complete playback controls, allowing you to pause the video at any point throughout the film.

Oct 18 2016 Update

There have been updates to both the Windows 10 Anniversary Update (Build 14393.187) and Windows Server 2016 (Build 10.0.14393), however I don’t believe there is a need to update the pictures and videos shown above because most of the fixes continue to operate in the same manner. To be honest, I still have some further testing to complete.

Nov 07 2016 Update

Because of some UI changes in the Windows 10 Anniversary Update, it may be necessary to update the material above to make the instructions a little more obvious. I will make every effort to make time for modifications.

Oct 18 2017 Update

Version 1709 has been added, and happily, it has become lot easier to fix as a result! Even after several searches in Search/Cortana, no results are returned when searching for “network location” or “network profile.” It appears that Microsoft’s telemetry data may not accurately reflect the number of individuals who are having difficulty locating this setting, which appears to be changing about in the Windows 10 UI between versions. Here’s an example of the clear new language Microsoft uses in the Network profile area of the Settings application: ” Profile of a network

  • Public It is impossible to access your PC from other devices on the network, and it cannot be used for printer and file sharing. Private For a network you are comfortable with, such as at home or at work. In the event that you don’t put it up, your PC is discoverable and may be used for printer and file sharing.

May 27 2019 Update

The years 1803 and 1809 had previously been included at some point in the past that I was unaware of. Today, I added the number 1903.

Mar 18 2020 Update

Article has been updated, and a build point release table has been included below:

  • In addition to the Fall Creators Update (version 1709 build 16299.19), the Windows 10 April 2018 Update (version 1803 build 17134.1), the Windows 10 October 2018 Update (version 1809 build 17763.1), the Windows 10 May 2019 Update (version 1903 build 18362.116), the Windows 10 January 2020 Update (version 1909 build 18363.720), and the Windows 10 October 2018 Update (version 1809 build 17763.1)

See also at TinkerTry

  • 24th of May, 2019. How to display the Windows version and build number on your desktop.
  • How to change the network location of Windows 10 from Private to Public on October 29, 2015 You’ll find this article useful if you’re attempting to go in the other direction.
  • How to change the network location of Windows 8.1 from Public to Private on November 26, 2013

Learn how to set this useful tray icon to automatically start by clicking here.

  • On February 12th, 2013, Windows Task Manager was automatically launched as an effective CPU monitor in your system tray.
  • This Superguide explains how to use Veeam Endpoint Backup FREE to back up and restore your family’s Windows 10 PCs, which can be done on a local drive or on any Windows or NAS network share.
  • Invest in a TinkerTry’d Micron SuperServer Bundle, which is a powerful and efficient home virtualization lab solution.

See also

  • In Windows 10, you may choose whether your network location is public or private. Network Location Awareness (NLA) and how it pertains to Windows Firewall Profiles was discussed on June 7, 2015, at the Windows Ten Forums by Brink. Michael Platts’ Windows Networking Blog published an article on September 8, 2010.

According to this Wiki page, the version number is comprised of the first two digits representing the year, and the second two digits representing the month in which the finalized bits were made available to Window Insiders, which was usually a month or two before the GA (Generally Available) date of the operating system.

  • Version 1507 build 10.0.10240 GA’d on 07/29/2015, First Release/GA/RTM, codenameThreshold 1 Version 1511 build 10.0.10586 GA’d on 11/12/2015, November Update, codenameThreshold 2 Version 1607 build 10.0.14393 GA’d on 08/02/2016, Anniversary Update, codenameThreshold 3 Version 1607 build 10.0.14393 GA’d on 08/02/2016, Anniversary Update, codenameThreshold codename Redstone 1 Version 1703 Build 10.0.15063 was made generally available on April 5, 2017, and is codenamed Creators Update. Redstone 2 Version 1709 Build 10.0.16299 GA was released on October 17, 2017, codenamed Fall Creators Update. Redstone 3 Version 1803 Build TBD (ETA1Q2018), codenamed Redstone 4
  • Redstone 3 Version 1803 Build TBD (ETA1Q2018)

Leave a Comment

Your email address will not be published. Required fields are marked *