How To Check Computer Specs Windows 10


How to find your computer’s specs on Windows 10, for information on its processor, video card, memory, and more

  • You can obtain extensive specifications about your machine in Windows 10, but the information is distributed around the operating system in different locations. By hitting the Windows key plus the Pause Break key, you may get some basic information about your machine. SystemInformation and DxDiag provide more in-depth information
  • However, they are not required. More articles may be found on the Business Insider homepage.

Whether you’ve constructed a bespoke Windowscomputer, carefully selecting every component to ensure optimal performance, or you’ve just purchased an off-the-shelf laptop, you may occasionally want particular information about what’s going on inside. Windows provides you with the tools you need to learn about your computer’s specifications, including information on its CPU, video card, RAM, and other components. That information, unfortunately, is dispersed across Windows in a variety of seemingly random locations.

Check out the products mentioned in thisarticle:

With a couple of clicks, you can get detailed information about your processor, how much memory is installed, and the version of Windows you are running on your computer. 1.Click the Start button and type “Control” into the search box. Photo: The Control Panel may be accessed by entering “control” into the Start menu. source Dave Johnson of Business Insider has contributed to this article. Choosing ControlPanel from the search results is step two. 3.Click”System.” In the System section, you will get an overview of the specifications of your computer.

To open this ControlPanel page more quickly, hold down the Windows key and the Pause Break key at the same time.

Find basic system information in Settings

In Settings, you may see information that is similar to this (along with some additional facts regarding the version of Windows that you are running). Start by selecting Settings from the Start menu (it’s the gear-shaped symbol above the power icon). 2.Click”System.” 3.Click”About.” In Settings, you may find out the basics about your computer, including the operating system it is running. source Dave Johnson of Business Insider has contributed to this article.

Find detailed specs in System Information

Windows’ SystemInformation contains far more thorough information about your machine than the information found in the Windows’ SystemInformation. 1.Click Start and type “system information.” 2.Click “SystemInformation” in the search results to open the system information window. 3.The most of the information you want may be found on the first page, in the SystemSummary node. Photo: The System Information software is your entrance to comprehensive information about your computer.sourceDave Johnson/Business Insider4.To access specifics about your video card, select “Components” and then “Display.” You can also expand each node in the left pane to get more information.

Find details about video and sound in DirectX DiagnosticTool

The DirectX Diagnostic Tool, or DxDiag, is a Windows program that provides precise information about the video card and sound devices that are installed on your computer, and it is accessible through the Start menu. 1.Click the Start button and put “dxdiag” into the search box. 2.Go to the search results and type in “DxDiag.” 3.Click on the “Display” tab to examine the specifics of your video card. You may also view the information about your sound card by selecting the Sound tabs. The System tab includes the same information that can be found in the other tabs of the menu bar.

A screenshot of the DxDiag software, which displays precise information about your multimedia components such as your video and sound cards. source Dave Johnson of Business Insider has contributed to this article.

Related coverage fromHow To DoEverything: Tech:

Because there are hundreds of different firms that build Windows PCs, it can be difficult to determine what type of processor you have, how much RAM you have, and other specifications. In addition, understanding how to verify your computer specs makes it easier to update your hardware and determine the system requirements for an application you wish to install. Here’s how to check your computer’s specifications and the health of its hardware on Windows 10.

How to Check Computer Specs

In order to view your computer’s basic specifications in Windows 10, first click on the Windows start button, then on the gear icon for Settings. System may be found in the Windows Settings menu. SelectAbout from the drop-down menu. You will be able to examine the specifications of your CPU, RAM, and other system information on this page.

  1. To begin, press the Windows Start button. It’s the Windows logo button in the bottom-left corner of your screen
  2. Then select Settings from the menu that appears. This is the gear-shaped symbol that appears right above the power button on your device. After that, choose System. Scroll down to the bottom of the page and selectAbout from the left sidebar. You may discover information on your CPU, RAM, and other components in this section.

How to Find Out How Much RAM You Have

The quickest and most straightforward way to see how much RAM you have is to type RAM into the Windows search box. The View RAM Infooption should appear in the search results box if the search term is entered correctly. To access the System Configuration window, click on here. Check the field forInstalled RAM in theDevice Specificationssection of the device’s documentation.

  1. Choose RAM by typing it into the Windows search bar by clicking on the magnifying glass icon in the bottom-left corner of your screen
  2. To view RAM information, press Enter or choose View RAM Information from the search results. Check the information under the Installed RAM section. Your RAM installation and usage will be displayed by Windows, as well as your total RAM usage and installation. This information may be found in theDevice Specificationssection.

More information about Random Access Memory, as well as how much RAM you require, may be found in the following article:

How to Find Out What GPU You Have

Use the Windows search bar to find out what graphics processing unit (GPU) you have by typing Device Manager in the search box and pressing enter. Then choose Display adaptors from the drop-down menu by clicking on the arrow next to it.

  1. In the Windows search box, type inDevice Manager to find it. Windows will begin to load search results even before you have finished typing the search word
  2. Press Enter or click on theDevice Managerapp icon that appears to continue the search process. The icon for theDevice Managerapp should be a camera next to a printer, as seen below. The Device Managerwindow will be opened by pressing the Enter key or clicking on the icon. Finally, click on the arrow next to Display adapters to check which GPU you have installed on your computer. The entry below, Display adaptors, indicates the GPU you are using.

Note:If the manufacturer’s name does not appear in the record, perform the following steps:

  1. Choose the name of the GPU. This will cause it to be highlighted in blue
  2. Right-click on the graphics processing unit (GPU)
  3. On the pop-up menu that opens, selectProperties. By default, the Properties window will open to the General tab
  4. However, you may change this. Look for a field labeledManufacturer on the General tab of the window.

How to Find Out What Motherboard You Have

If you want to find out what sort of motherboard you have, put system information in the Windows search box and press enter. Afterwards, check for a field with the labels System Manufacturer and System Model. This will provide you with information on the manufacturer and model of your motherboard.

  1. Information about the typesystem is displayed in the Windows search bar. Even before you have finished typing the search query, Windows will begin to load search results. Press Enter or select the System Informationapp icon from the menu bar. The System Informationapp icon resembles a computer with a blue screen in the middle and the letter I in the middle of that screen. By default, pressing Enter or clicking the program icon will open theSystem Summarysection
  2. However, you may change this by selecting another option. Check check the fields for the BaseBoard Manufacturer, Product, and Version
  3. These are all important.

Consider reading our post on how to pick the best motherboard if you’re thinking about upgrading your system’s mother board.

How to Find Out What CPU You Have

In order to determine what CPU you have, use the keys Ctrl + Alt + Delete on your keyboard. To access the Task Manager, select the Performance tab from the drop-down menu. Located in the top right-hand corner of the window, and above the CPU use charts, you will see your CPU information.

  1. Right-click on the taskbar to bring up the context menu. Essentially, this is the bar that appears at the bottom of your screen at all times. Then choose Task Manager from the drop-down menu. This will open theProcesstab, which includes a list of all the apps currently operating on your computer
  2. Go to thePerformancetab in the Task Managerwindow to view the results of your tasks. It is important to note that if you do not see thePerformancetab, you must clickMore Details. On the left-hand side of the screen, select the CPU section. This will highlight the selection in blue
  3. You will see the type of CPU you have next to the word “CPU” in the top-right corner of the window
  4. And you will be able to close the window.

Are you interested in learning more about CPUs and what they do? Check out our page on what a central processing unit (CPU) is.

How to check your PC specs in Windows 10

Knowing the technical details of your Windows 10 computer might be really beneficial. The ability to locate and understand your PC specifications will help you ensure that you have the resources you need to complete your tasks, or that you know what to upgrade if something is lacking. This includes knowing how much space you have on your storage drives to knowing if you can run a video game at its recommended settings.

In Windows 10, you may find out about your computer’s specifications using a range of tools, including the basic tools that come with the operating system and a variety of third-party software solutions.

Finding the basic specs in Windows 10

Kevin Casper/International Development Group There is a section in the Windows 10 Control Panel that may provide you with the very minimum information about your computer’s characteristics, including the kind and speed of your CPU, the amount of RAM installed, and the operating system version. You may either use the keyboard shortcut Win+Pause/Break to get here, or you can find it by following the instructions below:

  • Start by selecting Start from the Start Menu. “Control Panel” may be found by typing or searching for it. Then locate and choose “System and Security” from within the Control Panel window. In the new view, locate and choose “System” or “View amount of RAM and CPU speed” from the drop-down menu

Using the Task Manager’s Performance tab

Kevin Casper/International Development Group Windows 10 has a Performance area in the ever-popular Task Manager, which many users use to force an application to quit when it becomes stuck. This part lets you to get a fast peek at your active hardware specifications, as well as charts and statistics on how active they are. There are two keyboard shortcuts that may be used to bring up the Task Manager:

  • Hold down Ctrl + Shift + Esc
  • Hold down Ctrl + Alt + Delete, and then pick “Task Manager” from the drop-down menu

Additionally, you may access and start the Task Manager from the Start Menu by going to: Start > Programs > Accessories > Task Manager.

  • Start by selecting Start from the Start Menu. “Task Manager” may be found by typing or searching for it. To open the “Task Manager” app, choose it from the search results and click on it.

The Performance tab should be visible once the Task Manager has been opened, and you should be able to choose it by clicking on it. The CPU, memory (also known as RAM), disk drives, network connection(s), and graphics devices should all be listed on the left side of the Performance tab, if they are relevant to your situation. Any device selected will display more hardware information, as well as information on current activities on your computer, such as how much CPU power or RAM your computer is using.

To access the System Information tool, follow these steps:

  • Start by selecting Start from the Start Menu. “System Information” should be typed in or searched for. To access the “System Information” app, choose it from the search results and click on it.

The System Information tool’s first page provides a comprehensive overview of your computer’s characteristics, including in-depth information on your operating system, CPU, BIOS, motherboard, RAM, and other important components. Detailed information may be found by browsing the category tree in the left-hand pane of the window, notably under the heading “Components.” The following definitions will assist you in understanding some of the terms used in this tool:

  • Processor is the same as central processing unit (CPU). BaseBoard is the same as Motherboard. Physical Memory is equal to random access memory (RAM). The term “display” refers to the graphics device in the category tree. Graphics Card is a component in the ComponentsDisplay category with the following name: Drives = the formatted separations of disk space where you keep your files, such as C: and D:
  • (in the Category tree, under Storage) Drives = the formatted separations of disk space where you store your files, such as C: and D:
  • (In the Category tree, under Storage) Disks = The physical storage hardware in your computer that includes the formatted drives
  • (In the Category tree, under Storage) Disks = The physical storage hardware in your computer that contains the formatted drives
You might be interested:  How To Add A User To Windows 10

There are a multitude of PC spec and performance monitoring tools available, but two standouts that can offer a comprehensive picture of your PC’s hardware and specification information are HWiNFO and Speccy, both of which are free to download. Information courtesy of Kevin Casper/IDGHWInfo HWiNFO delivers information that is comparable to that provided by both the Windows 10 Task Manager Performance tab and the System Information tool, but with more specificity and depth. HWiNFO may connect to the different sensors in your computer to provide a detailed view of various hardware characteristics, such as CPU speeds and voltage settings.

Clickable links to various component sections provide additional thorough information, if necessary, on the individual components.

Following your acquisition of information about determining your PC’s specifications, you may proceed to determining whether or not it can run Doomor and whether or not you actually require additional RAM.

How to Check PC Full Specs Windows 10 in 5 Ways

No matter when you want to check the complete characteristics of your Windows 10 PC, laptop, or tablet, you may do so using the five methods detailed in this post by MiniTool Software. A step-by-step explanation on how to check PC specifications in Windows 10 is provided. Consider checking the entire specifications of any new Windows 10 machine you want to purchase before making your final decision. Still, if your Windows 10 PC is experiencing issues, you should review the precise computer specifications for Windows 10 to assist you in troubleshooting the issue.

So, let’s get right to the point: how can you check your PC’s specifications in Windows 10?

These five methods make it simple to determine the operating system version, model number, CPU, RAM, hard drive, graphics card, BIOS (Basic Input/Output System), UEFI (Unified Extensible Firmware Interface) firmware, and other details about your Windows 10 machine.

Quick Video Guide: Free Download Quick Video Guide:

How to Check PC Specs Windows 10 through System Properties

The System Properties window is one of the most commonly used tools for determining the specs of a Windows 10 computer. You may view the fundamental computer specifications of your Windows 10 machine, such as the Windows 10 edition and the system details.

Step 1. Open Windows System Window

Normally, there are two options for opening the Windows 10 System window.

  • You may access the computer system window by selectingProperties from the menu bar when you right-click This PC on the computer screen. By hitting the shortcut key, you may access the Windows Systemwindow in a flash. For example, press Windows and the Pause/Breakkey on the keyboard simultaneously.

Step 2. Check Computer Specs Windows 10

Here, in theSystemWindow, you can check basic information about your Windows 10 machine, such as the operating system’s edition and CPU and RAM capacity. You can also view the system type, computer name and domain, product ID, and Windows activation status. Check out the Windows 11 pricing and learn how to obtain a Windows 11 license/product key in three different methods. Activate your Windows 11 computer or laptop in seconds.

How to Find Computer Specs Windows 10 from Settings

You can also examine the fundamental specifications of your Windows 10 PC using the Windows 10 Settings. To view the computer and Windows 10 system specifications, go to Start – Settings – System -About and choose “System Specifications.” Device specs include the following information: device name, CPU, RAM, device ID, product ID, system type, pen, and touchscreen. In the Windows specs area, you may view the system edition, version, installation date, and Windows 10 operating system build information.

Examine the steps required to have Windows 11 64 bit for free downloaded onto your computer. Check to see whether your computer fulfills the Windows 11 64-bit system requirements as well.

How to Check PC Specs Windows 10 Using System Information

System Information allows you to view the whole set of computer specifications for your Windows 10 computer. Take a look at the guide below.

Step 1 – Open System Information Window

In addition, there are two ways to access the Windows System Information Window.

  • Alternatively, you may hit the Windows+Rkey combination on the keyboard to open the WindowsRUNwindow first. Then type msinfo32 and press the Enter key
  • Alternatively, you may click Start and type System Information. And then pick the most appropriate match result. Information about the system

Step 2 – Find Full Computer Specs Windows 10

In the System Summary, you may view the whole set of specs for your Windows 10 device, including the operating system version, system model/type, CPU, BIOS, RAM data, and other information. Under System Summary, there are three categories to choose from in the left-hand panel: Hardware resources, components, and the software environment are all discussed. If you are unable to locate the graphics card information, you may expand theComponentscategory and clickDisplay to examine the graphics card information on your Windows 10 machine.

Then, to save the system information file into a text file, select a location and type a name in the Save As box.

Follow the step-by-step instructions to download and install the Windows 10 64/32 bit operating system.

How to Check PC Specs Windows 10 with Command Prompt

Another option for obtaining computer specifications in Windows 10 is to utilize the Command Prompt.

Step 1. Open Command Prompt Tool

To begin, you must launch the Command Prompt, which is a program that checks your computer’s specifications. There are two ways to get into it.

  • To launch the Command Prompt window, just press the Windows+R keys together and type cmdin theRUNwindow. Alternatively, you may click Start and type Command Prompt. Then right-click the Command Prompt result and select theRun as administrator option from the context menu that appears.

The two most effective methods of booting into the Command Prompt on Windows 10. Learn how to launch the Command Prompt at startup time in Windows 10 and how to repair Windows 10 using the Command Prompt in this article.

Step 2. Check Windows 10 Computer Specs

After that, you may type systeminfo and press Enter. Your Windows 10 computer specs will be presented in the following window, including the operating system and system information, CPU, RAM, BIOS and Windows 10 update information, as well as network information. Will Windows 11 continue to support 32-bit applications? This page contains information about Windows 11 32 bit and, if it is supported, provides links to Windows 11 32 bit download sites if necessary.

How to Check Laptop Specs Windows 10 through PowerShell

The last and most practical method of obtaining Windows 10 machine specifications is through the use of Windows PowerShell.

Step 1 – Open Windows PowerShell

If you want to launch PowerShell as an administrator, you may right-click Start and select Windows PowerShell (Admin).

Step 2 – Get Windows 10 Computer Specs Information

Afterwards, you may run the following command line: Get-ComputerInfo. HitEnter. After that, you may use Windows 10 to see the whole set of specifications for your machine. You may quickly and simply verify the entire specifications and system details of your Windows 10 PC by using one of the five methods listed above. For a better gaming experience, learn how to download and install DirectX 12 (Ultimate) on your Windows 10 or Windows 11 computer. In this tutorial, you will also discover what DirectX 12 (Ultimate) is.

Best PC Benchmark Software to Test PC Hard Drive Speed

When it comes to PC performance testing, the finest PC benchmark software – MiniTool Partition Wizard – makes it simple to assess hard disk speed in Windows 10 with the click of a button. MiniTool Partition Wizard is a free hard drive partition manager that is compatible with Windows 10/8/7. It is completely clean and safe to install. On your Windows 10 PC, you may simply use it to test the hard drive/performance, SSD’s create, resize, extend, merge, divide, remove, format, copy, wipe partitions, copy/convert disks, migrate OS, recover data (recover my files), and perform a wide range of other operations.

Download it for free.

Step 2.In the Disk Benchmark window, you may specify the PC disk or partition to be benchmarked, as well as the Transfer Size, Total Length, Queue Number, Thread Number, Cool Down Time, and Test Mode parameters (Sequential, Random, and SequentialRandom).

Step 3.Click the Startbutton to begin measuring the read and write speeds of your PC’s hard disk.

PC Drive Is Full? Use Space Analyzer to Release Free Space

MiniTool Partition Wizard also includes aSpace Analyzer function, which allows you to analyze your computer’s hard drive storage space in order to determine what is taking up the most space on your computer. You can also delete unnecessary files, folders, programs, and other items directly from the Space Analyzer window. Step 1.After you have logged into the MiniTool Partition Wizard’s main interface, you can access the Space Analyzer feature in the toolbar by selecting it from the toolbar. Step 2.After that, choose a drive or partition and clickScan to examine the disk space use on your Windows 10 PC.

You can see how much each folder is used, how big it is, and how many objects are in it.

PC Specs Test – Check If Your PC Can Run a Game

It also includes aSpace Analyzerfunction, which allows you to analyze your computer’s hard drive storage space in order to determine what is taking up the most space on your computer. You can also delete unnecessary files, folders, and programs directly from the Space Analyzer window, which is accessible from the Partition Wizard window. Step 1.After you have logged into the MiniTool Partition Wizard’s main interface, you can access the Space Analyzer feature in the toolbar by selecting it from the menu bar.

Step 2.

In each folder, you can see how often it is used, how big it is, and how many things are in it.


In terms of how to verify PC specifications, This page offers you with 5 different methods, each with full step-by-step instructions. If necessary, you may also use MiniTool Partition Wizard to simply run a PC benchmark, monitor PC space use, and manage PC hard drive/partition using the software. When will Windows 11 be made available to the public? On June 24, 2021, Microsoft announced the availability of the first Insider Preview of Windows 11. The official release date may be October 2021, according to certain sources.

How to Find and Check Your Computer Specs in Windows 10, 8, and 7

There is a wealth of information available on what is included within your computer, but in the majority of cases, you will be interested in one of the important specifications listed below. If you already know the specification you’re interested in and want to learn how to rapidly examine its details, scroll down to the section below.


The CPU (central processing unit) serves as the brain of your computer. Many apps require a CPU with a minimum level of processing power, so you’ll want to know how much processing power your computer is capable of providing.

Overworking a CPU can cause it to overheat, so it’s important to keep an eye on its temperature, particularly when putting it under a lot of strain.


It is the graphics processing unit (or GPU) that is in charge of everything you see on your screen. Knowing your GPU specifications is very crucial while gaming or performing other graphics-intensive jobs such as video editing on a computer. Your GPU, like your CPU, can overheat if you ask it to perform tasks that it is not capable of performing.


RAM (random access memory) is used by your computer to manage all of the processes that are currently running on it. The more random access memory (RAM) you have, the more work your computer can manage – and the more jobs it can complete — at the same time.


You can speak with one another thanks to the motherboard, which connects your CPU, graphics card, and RAM all in one place. The motherboard has specific physical limitations due to the fact that it is a piece of hardware — for example, if your motherboard only has two RAM slots, you will not be able to insert more than two RAM modules if you are upgrading your RAM.

Hard drive space

When you’re installing a new program, it will tell you how much space it requires on your hard drive. If you do not have enough, you will not be able to complete the installation. Similar rules apply when downloading or generating new files.

Why should I check my PC specs?

Understanding the hardware that is installed on your computer may be beneficial for a range of jobs and in a variety of scenarios. The following are some instances of situations in which it would be beneficial to know how to check your RAM, your CPU, and your other computer specifications:

  • When you’re selling your computer: When you’re selling your computer, make a list of all of its specifications. This will provide prospective purchasers with the information they require in order to make an informed selection, and it will also assist you in determining how much you should charge
  • When you want to get a new computer, consider the following: Examining your present computer specifications might assist you in determining what you require in a new computer. Learn about the areas where your existing computer falls short so that you can evaluate how powerful your new computer should be. It is possible to compare CPU specifications and look at different GPU benchmarks to determine what you want when designing your own computer. When you want assistance: Do you have a problem with your hardware or another performance issue? When you call tech support, be prepared to provide them with the specifics of your problem. They’ll need to know what you’re dealing with in order to provide you with the finest advise. When you’re upgrading your drivers, keep these things in mind: When you update your graphics drivers or audio drivers, you’ll need to know the precise model number of your graphics or sound card in order to do so successfully. That is, of course, unless you’re using a driver updater that automatically updates your drivers. AVG Driver Updater will automatically detect your system specifications and maintain all of your drivers up to date. Its very user-friendly interface will guide you through the process of updating your old or defective drivers, resolving any remaining driver-related issues, and returning your PC to peak performance in no time
  • When you wish to experiment with a new game or application: Get a new game on your old PC or laptop, or even a classic like GTA 5 or Ark: Survival Evolved, on your old computer or laptop. First and foremost, ensure that your computer satisfies the minimal system requirements for the game. You will not be able to install it if this is not the case. If you’re overclocking your CPU or GPU, you should do the following: Overclocking your CPU or GPU refers to the process of adjusting your computer so that it performs quicker than it would otherwise with its default settings. Check your specifications and stress-test your CPU or GPU before you begin so that you are aware of your starting position. Overclocking your CPU and graphics card may be dangerous, so you’ll want to gather as much information as possible before you begin
You might be interested:  How To Test Webcam Windows 10

In the event that you decide to sell your computer: When you decide to sell your computer, make a comprehensive record of all of its specifications. As a result, potential purchasers will have the information they require to make an informed selection, and you will be better able to determine how much you should charge; A new computer should be purchased when the following circumstances arise: You may determine what you require in a new computer by examining your present specifications. Learn about the areas where your existing computer falls short so that you can decide how powerful your new computer should be.

  1. The following situations necessitate assistance: Do you have a problem with your hardware or with your overall performance?
  2. The finest advise will come from someone who understands the situation you’re in.
  3. Except, of course, if you’re making use of a driver updater that does everything for you automatically.
  4. Its very user-friendly interface will guide you through the process of updating your old or malfunctioning drivers, resolving any remaining driver-related issues, and restoring your machine to peak performance in record time.
  5. Get a new game on your old PC or laptop, or play a classic like GTA 5 or Ark: Survival Evolved on your old computer or laptop.
  6. You will not be able to install it if this is not the case; Overclocking your CPU or GPU will result in the following consequences: In order to overclock your CPU or GPU, you must first tune them so that they operate quicker than they would otherwise with their original settings.

Make sure you know your starting point by checking your specifications and stress-testing your CPU or GPU before you begin. Overclocking your CPU and GPU may be dangerous, so you’ll want to gather as much information as possible before you begin;

How and where to check your CPU, RAM, motherboard, and GPU specs

Windows provides you with a number of options for determining your hardware specifications. You can use one of the ways listed below to verify your CPU specifications and obtain further information, depending on the amount of detail you want.

Check your computer specs using Windows system settings

Your Windows system settings give a simple and handy method to examine the specifications of your computer. First, we’ll walk you through the process on Windows 10, and then we’ll walk you through the process on Windows 7.

Opening Windows system settings in Windows 10

Start by selecting Start, then opening yourSettings and selecting System. ChooseAbout from the drop-down menu on the left. This will display your PC’s basic characteristics as well as the version of Windows that is currently installed on your computer. It is simple to copy and paste your specifications immediately from this screen.

Opening Windows system settings in Windows 7

Right-click on theComputericon and selectProperties from the drop-down menu. Listed below are the most important specifications, such as your CPU, available RAM, certain support numbers (which vary depending on the PC manufacturer), and the version of Windows you’re running on your computer. The information you’ll discover here isn’t particularly substantial, but it will suffice. If you want further information, select Device Manager from the menu bar on the left side of the screen and go through the list of devices (more on that below).

Check computer specs using the Command Prompt

Put on your (beneficial) hacker hat and press the Windows key + R to bring up the Run window on your computer. To launch the Command Prompt window, type cmd and hit Enter on your keyboard. Enter the command linesysteminfo into the text box and hit Enter. Your computer will display all of the specifications for your system; you will just need to navigate through the results to locate what you are looking for.

Check computer specs using the Device Manager

Trying to discover out what a certain device, such as your graphics card or sound chip, is called but getting nowhere? The use of Device Manager is recommended. Device Manager may be accessed by right-clicking on your Windowsmenu and selecting it. The next window that appears will display a list of all of the features that are incorporated into your computer or laptop. As demonstrated in the picture below, go through each item in the list and double-check the names of the devices. Each accessory or device that is attached to or integrated into your PC or laptop is often identified by a clear and complete name in Device Manager.

  1. Is the listing labeled “Unknown”?
  2. You can still figure out the device’s GUID if you try hard enough (Globally Unique Identifier).
  3. Double-click on the enigmatic entry in Device Manager, such as Broadcom 802.11ac, to see its meaning.
  4. SelectHardware Ids from the drop-down menu under Properties.

Make a note of one of the items by selecting it with the right click and pasting it into your preferred search engine to learn more about it. Using a simple internet search, you may quickly and simply determine the precise name of the unfamiliar gadget.

Check detailed computer specs using System Information

Let’s take it a step farther. System Information is the greatest and most comprehensive built-in tool for verifying the specifications of your computer. To access it, go to your Windowsmenu and type the phrase System Information into the search box. Windows will automatically locate it for you. System Information may be found by clicking here (or hitEnter). The tool that appears next is the most comprehensive, but also the most involved, method of determining your computer’s specifications. You can look up everything from your computer’s BIOS/UEFI version to the revision number of your motherboard, as well as all of the drivers and apps that are currently operating on your system.

You may use this tool to do the following:

  • Make a particular search for information. If you’re looking for anything specific, you may use theFind whatfield at the bottom of the window to find it. Create a system report by following these steps: Open theFilemenu and selectExportto save all of this information into a convenient text file that can be shared with others. This might come in handy when a service representative requests these specifics, or when you need to publish your hardware specifications on an internet discussion board.

Use a third-party tool to easily view all your specs

The built-in spec-hunting tools in Windows can be a little difficult to navigate. And with so much information available, it can be difficult to know where to begin. If you’re feeling overwhelmed, you might want to think about using a dedicated spec checking tool. Speccyis a free utility that shows your computer specs in a simple manner, allowing you to simply and quickly identify the information you want.

Get the best performance from your existing hardware

Using Windows’ built-in utilities or a free third-party application such as Speccy, you may quickly and simply discover all of the specifications of your computer. You may use these tools to find out all you need to know about your computer’s characteristics, whether you’re seeking for information about its RAM or CPU or just want to know which apps are currently loaded on your machine. Make sure your computer has regular maintenance and optimization to ensure that it gets the most out of the hardware beneath the hood and that it doesn’t become clogged with bothersome performance bottlenecks.

How to Check Windows 10 Computer System Specs & Requirements – Microsoft

For the most part, these are the requirements for installing Windows 10 on a computer. If your device does not satisfy these requirements, you may not be able to enjoy the full Windows 10 experience, and you may want to consider getting a new computer.

Processor: 1 gigahertz (GHz)or fastercompatible processoror System on a Chip(SoC)
RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit
Hard drive size: 32GB or larger hard diskNote: See below under “More information on hard drive space to install or update Windows 10” for more details.
Graphics card: Compatible with DirectX 9 or later with WDDM 1.0 driver
Display: 800×600
Internet Connection: Internet connectivity is necessary to perform updates and to download and take advantage of some features. Windows 10 Pro in S mode, Windows 10 Pro Education in S mode, Windows 10 Education in S mode, and Windows 10 Enterprise in S mode require an internet connection during the initial device setup (Out of Box Experience or OOBE), as well as either a Microsoft account (MSA) or Azure Activity Directory (AAD) account. Switching a device out of Windows 10 in S mode also requires internet connectivity.Learn more about S mode here.

Additionally, there may be additional needs for upgrades throughout time, as well as requirements to switch on certain capabilities inside the operating system. Windows 10 is designed to give updates over the duration of the device’s supported life cycle. Quality updates and feature updates are the two sorts of updates that may be delivered. Quality updates, which comprise both security and non-security updates, are normally provided once a month and are intended to be installed before the end of the month.

It is critical for the security of your device that these updates are received and that your device be maintained up to date at all times.

Whenever an update becomes available, and provided that there is adequate free storage space on your device, it will be deployed automatically.

It is critical to ensure that your device has enough free space in order for Windows 10 to continue to receive security updates. See the following notes for any extra information that may be relevant. Important information regarding the updates:

  • If the device hardware is incompatible with the operating system, if it lacks current drivers or adequate accessible hard drive space, or if it is otherwise outside of the Original Equipment Manufacturer’s (“OEM”) support period, the device may be unable to receive updates. You can learn more about the servicing timelines for each feature update by visiting theWindows Lifecycle Fact Sheet or theWindows Lifecycle FAQ for Windows products.
  • Some of the disk space necessary for installing updates is only required for a short period of time. It is typical that ten days after installing an update, a disk cleanup will be carried out automatically in order to destroy copies of the older, unnecessary Windows files and free up space on the computer’s hard drive.
  • Not all of the features included in an update will be available on all devices. It is necessary to have an internet connection in order to execute updates, and Internet service provider (ISP) costs may apply. If you want assistance with the installation of an update, the Windows 10 Update Assistant may be able to assist you

When it comes to the size of the Windows operating system that comes pre-installed on your device, as well as the amount of space required to download and install Windows updates, the results are very varied and rely on a variety of factors. For further information, please see this page. When determining how much free hard drive space is required for an update, several factors must be taken into consideration, including the previous versions of Windows that were installed on the machine, the amount of disk space available to reuse from Windows files, such as the virtual memory pagefile or the hibernation file, the applications that are installed on your device as well as the manner in which those applications store data.

  • Starting with the May 2019 Update, the minimum hard drive size required for clean Windows 10 installations as well as new PCs was increased to 32GB from the previous 16GB.
  • Installing Windows or upgrading from a prior version of Windows on devices with less than 32GB of storage will continue to function as long as there is sufficient free space on the device.
  • You may also clear up space on your own by doing the necessary procedures.
  • Some features, in addition to the criteria listed above, have extra needs that must be met in order to function properly.
  • Please see your Original Equipment Manufacturer (OEM) for detailed hardware support information (OEM).
  • It is necessary to have a Trusted Platform Module (TPM) version 1.2 or above as well as a BIOS or UEFI that is Trusted Computing Group (TCG) compatible in order to use BitLocker Drive Encryption (available exclusively with Windows 10 Pro or Windows 10 Enterprise). It is possible to utilize BitLocker on systems that do not have a TPM, but you will need to keep a startup key on a portable storage device, such as a USB flash drive. While you wish to automatically encrypt the local disk when connecting a device to Azure Active Directory, you must have TPM 2.0 and InstantGo support installed on the device (AAD). Make sure to check with the maker of your PC to ensure that your device is compatible with the relevant TPM version and InstantGo for the scenario you wish to activate. This feature requires a USB flash drive (available exclusively in Windows 10 Pro and Windows 10 Enterprise)
  • BitLocker To Go is only accessible in English. It is required that a 64-bit machine with second level address translation (SLAT) capabilities and an additional 2 GB of RAM (available exclusively in Windows 10 Pro and Windows 10 Enterprise) be used to run Client Hyper-V
  • The Cortana virtual assistant is presently only accessible on Windows 10 in the following countries: the United States, the United Kingdom, China, France, Italy, Germany, Brazil, Mexico, Japan, Canada, Spain, Australia, India. Some functions need the use of a Microsoft account. Wi-Fi Direct is required as well as a display adapter that supports Windows Display Driver Model (WDDM) 1.3, in order for Miracast to work. The MoviesTV application is not accessible in all countries or all languages. You may see a list of available regions on theMoviesTVinformation page, which is always up to date. UEFI version 2.3.1 Errata B is required, as is the inclusion of the Microsoft Windows Certification Authority in the UEFI signature database. Skype is only accessible in certain countries and areas. Only certain nations and areas will be contacted. Special, premium, and non-geographic numbers are not included. For further information, see the Office FAQ page. A maximum of two apps can be snapped in Tablet mode and a maximum of four applications can be snapped in Desktop mode, depending on the minimum resolution of the application. The accuracy of speech recognition will vary depending on the device’s microphone. You will require the following items in order to have a more enjoyable speaking experience:
  • A high-fidelity microphone array
  • A hardware driver that makes the geometry of the microphone array visible
  • Tablet mode is accessible on tablets and 2-in-1s that have GPIO indications, as well as those that have a laptop and slate indicator, and may be programmed to automatically enter “tablet mode.” A tablet or a monitor that supports multi-touch is required in order to make advantage of touch. When using two-factor authentication, you must have a PIN, a biometric (fingerprint reader or lighted infrared camera), or a phone with Wi-Fi or Bluetooth capabilities to complete the transaction. Microsoft Windows Hellorequires either an infrared (IR) camera or a fingerprint reader for biometric authentication in order to function properly. Windows Hello may be used on devices without biometric sensors by entering a PIN or using a portable Microsoft compatible security key. An Xbox Live account is required for use of the Xbox application, which is not accessible in all territories. If you’re looking for the most up-to-date list of regions, visit the Xbox Live Countries and Regions website. Wi-Fi Direct Printing necessitates the use of a Wi-Fi adapter that is compatible with Wi-Fi Direct as well as a device that is compatible with Wi-Fi Direct printing.

The following languages are supported by Windows 10: Arabic (Saudi Arabia), Bulgarian (Bulgaria), Chinese (People’s Republic of China), Chinese (Taiwan), Croatian (Croatia), Czech (Czech Republic), Danish (Denmark), Dutch (Netherlands), English (United Kingdom), English (United States), Estonian (Estonia), Finnish (Finland), French (France), French (Canada), German (Germany), Greek (Gree (Ukraine).

It is possible that certain functionality will be deprecated or eliminated when upgrading to Windows 10 from a prior version of Windows, such as Windows 7 or Windows 8.1, or when installing a subsequent update to Windows 10.

  • A sync option is available in the messaging program on the desktop, which can be used to sync SMS text messages received from Windows Mobile and save a duplicate of them on the desktop. With the release of the May 2019 Update (Windows 10, version 1903), the sync capability was disabled from all devices. Messages will only be accessible from the device that received the message, as a result of this modification. Wireless WEP and TKIP: Starting with the May 2019 Update (Windows 10, version 1903), when connecting to Wi-Fi networks protected with WEP or TKIP, a warning notice will show, indicating that the network is not as secure as Wi-Fi networks secured with WPA2 or WPA3. Any connection to a Wi-Fi network made using these obsolete ciphers will be prohibited in a future version of the software. Wireless routers should be updated to support AES ciphers, which are accessible with WPA2 or WPA3 security protocols. In the Windows 10 May 2020 Update, the Cortana virtual assistant has been upgraded and expanded (Windows 10, version 2004). Affected by these changes will be the discontinuation of various previously accessible consumer talents, including music, linked home capabilities, and third-party capabilities. More information may be found here. As of the October 2018 Update (Windows 10, version 1809), the Phone Companion application has been deleted from your computer. To sync your mobile phone with your PC, go to the Phone page in the Settings app and select Phone. Every functionality of Phone Companion is included in this package. HomeGroup: HomeGroup has been deprecated since the April 2018 Update (Windows 10, version 1803), however you may still share printers, files, and folders with other users. It is not possible to see HomeGroup in File Explorer, the Control Panel, or Troubleshoot (SettingsUpdateSecurityTroubleshoot) if you are upgrading from an earlier version of Windows 10. Printers, files, and folders that you shared via HomeGroup will continue to be shared in the future as well. As an alternative to utilizing HomeGroup, the following functionalities are integrated into Windows 10:
  • Share printers, files, and folders
  • And share documents.
  • Distribute the use of your network printers. File Explorer allows you to share files with others. Please visit the following link for additional information on streaming media for Xbox 360 and HomeGroup customers.
  • Using the People app in Windows 10, you can see mail from Microsoft 365 contacts, contacts from your school or work organization, and contacts from your contacts list underConversations. For new mail from these specific contacts to appear in the People app after installing the April 2018 Update (Windows 10, version 1803), you must be connected to the internet and have signed into your account, which can be a Microsoft 365 account or a work or school organization account through theMail,People, orCalendarapps. Please keep in mind that you will only get mail for work and school organization accounts, as well as select Microsoft 365 accounts
  • And App for readers: With the release of the Fall Creators Update, the Reader application was no longer available in Windows 10. (Windows 10, version 1709). In order to read PDF files, Microsoft Edge is the suggested alternative program. It provides comparable functionality to Adobe Reader while also providing extra capabilities such as greater accessibility support, improved Inking, and support for Cortana voice commands. Similarly, when reading XPS files, the Windows XPS Viewer is advised, and while viewing TIFF images, the Windows Photos program is recommended. It should be noted that users of previous versions of Windows 10 can continue to use the Reader application
  • Windows Journal:Windows Journal was deleted with the release of the Windows 10 Anniversary Update (Windows 10, version 1607). The removal of Windows Journal will prevent you from being able to open or edit Journal files in the future (with.JNT or.JTP extensions). We recommend you to use OneNote instead of Windows Journal as your primary productivity tool. If you need help opening or editing your journal files, you can find further information here. Windows Media Digital Rights Management (WMDRM): Starting with the Windows 10 Anniversary Update, WMDRM will no longer be supported by Microsoft (Windows 10, version 1607). The ability to play music or video files that were previously protected by this rights management system has been removed. More information may be found by clicking here.
You might be interested:  How To Download Mods For Minecraft Windows 10

Devices that are upgrading from Windows 7, Windows 8, or Windows 8.1 to Windows 10 will be affected by the following modifications:

  • Installing Windows 10 will delete Windows Media Center if you have a previous version of Windows 7 (Home Premium, Professional, Ultimate), a previous version of Windows 8 (Pro with Media Center), or a previous version of Windows 8.1 Pro with Media Center. Mobile Device Management (MDM) is a term that refers to the management of mobile devices. When using the Windows 10 Home edition, you will be unable to use MDM capabilities. Gadgets on the Windows 7 desktop include: These will be uninstalled as part of the Windows 10 installation process. Solitaire, Minesweeper, and Hearts Games: These games, which come pre-installed on Windows 7, will be deleted as part of the Windows 10 upgrading process, which will take around 30 minutes. Microsoft has made available our versions of Solitaire and Minesweeper, which are referred to as the “Microsoft Solitaire Collection” and “Microsoft Minesweeper,” respectively. Drives that are compatible with floppy disks: If you have a floppy drive, you must obtain the most recent driver from Windows Update or from the manufacturer’s website. Because OneDrive is no longer supported if you have Windows Live Essentials installed on your PC, the OneDrive program is deleted and replaced with the inbox version of OneDrive. OneDrive placeholder files: OneDrive placeholder files are not supported in Windows 10. OneDrive placeholder files are not supported in Windows 10. In Windows 8.1, placeholders were presented for files that were available in OneDrive but not locally on the device. When using OneDrive settings in Windows 10, users may select which folders they want to sync with their computer. Snap:Snap is only capable of running two programs at a time in Tablet mode.

How To Check Computer Specs – Windows 10, CPU, GPU, Motherboard, & RAM

The most recent update was made on: If you’re new to PCs or trying to get into PC gaming, you’re probably wondering why you’d need to know the specifications of your machine in the first place. Well, that’s a valid question, and the following are just a few of the reasons why you might want to double-check your assumptions. You could be considering upgrading your computer, and you’ll want to know what your current specifications are so that you can choose the most appropriate improvements. Alternatively, you may be considering selling your computer and want specifications for your advertisement.

A step-by-step instruction will be provided on how to check everything from your CPU speed all the way down to how much RAM you have and everything in between.

Checking The CPU And What Speed It Is

Generally speaking, the first thing people want to know when looking at computer specs is what kind of processor (CPU) the computer has, and fortunately for us, this is one of the easiest pieces of information to come across. If you are using Windows 10, you are only a couple of mouse clicks away from finding out more about this. To determine what type of CPU your computer has, perform the following steps:

  • Right-click on the Windows tab in the lower left-hand corner of your desktop to bring up the context menu. Select ‘System’ from the drop-down menu that appears
  • Then click on it. Under ‘Device Specifications Processor,’ you can see a list of the CPUs that are currently installed on your computer.

Choose “Right-Click” from the context menu of the Windows tab in the lower left-hand corner of your desktop; System may be found in the drop-down menu that appears once you pick it. Processor specifications are provided under ‘Device Specifications Processor’, and you will be able to check which CPU is in your machine.

Checking Which GPU You Have

Many people will naturally want to know which CPU (Central Processing Unit) their computer is utilizing after they have determined which CPU their machine is using. You’ll be pleased to discover that identifying your GPU is as simple as determining which CPU you’re using. You will, however, be required to complete one further step. Follow these procedures to determine what graphics processing unit (GPU) your computer has:

  • As previously, right-click on the Windows symbol in the lower left-hand corner of your desktop
  • Then select Properties. Select the ‘Device Manager’ tab from the drop-down menu that appears. In ‘Device Manager,’ choose ‘Display adapters’ by clicking the” arrow next to it. You will be able to view the GPU that is being used by your computer by utilizing the drop-down menu.

This is another basic assignment. However, it is worth noting that certain users may notice that there are two options available under the ‘Display Adapter’ drop-down list, and this is not a cause for concern at this time. If this is the case, your computer is equipped with both integrated graphics and a separate stand-alone graphics card, which is a positive development. The dedicated graphics card, on the other hand, is what you’re searching for because it will be the more powerful of the two and will be the one that your computer will utilize to process images.

If your computer is powered by an Intel processor, you will almost certainly have integrated graphics, which is typically referred to as ‘Intel HD graphics 400’.

As a result, it will always be less powerful than your dedicated GPU.

This will often be some form of the NVIDIA Geforce GTX 950, 960, 1050, 1070, 1080, or similar.

Checking Which Motherboard You Have

The terrain is becoming more tough, but it is still very attainable; the only difference is that you must be a little more specific in terms of what you are searching for and how to get there. The quickest and most obvious way to determine if you have a PC is to open it up and look at the motherboard itself, which will have both the manufacturer’s name and model number printed on it. Easy. With the exception of rare motherboards, you’re likely to stumble across either ASUS, Gigabyte, or MSI, depending on the brand.

In the event that you are wanting to update or sell your computer, this is all of the information you will require on the subject.

To determine what type of Motherboard your computer is equipped with, perform the following steps:

  • The terrain is becoming more tough, but it is still extremely feasible
  • The only difference is that you must be a little more specific about what you want and how to get there. The quickest and most obvious way to determine if you have a PC is to open it up and look at the motherboard itself, which will have both the manufacturer’s name and the model number on it. Easy. The brands ASUS, Gigabyte, and MSI are the most common, unless you’re looking for anything specific. ASUS is the most popular. In most cases, this is followed by a sequence of digits and letters, which correspond to the motherboard’s model number. In the event that you are wanting to upgrade or sell your computer, here is all the information you will require. It is possible that taking this second path will be more convenient if you are unfamiliar with major motherboard manufacturers and do not fully comprehend the numbers and characters that designate the chipset. To determine what type of Motherboard your computer is equipped with, use the following procedures:

Now we’re entering into more tough territory, but it’s still extremely doable if you know what you’re looking for and how to get there. The easiest and most obvious way to check if you have a PC is to open it up and look at the motherboard itself, which will have both the brand and model number printed on it. Easy. With the exception of rare motherboards, you’re likely to stumble across either ASUS, Gigabyte, or MSI, depending on the brand name. This is frequently followed by a sequence of digits and letters, which corresponds to the motherboard’s model number.

You could find it simpler to use this second way, though, if you are unfamiliar with the common motherboard manufacturers and do not fully comprehend the numbers and letters that designate the chipset.

Checking How Much Memory (RAM) You Have

If you were under the impression that the complexity of each assignment increased with each segment, you would be completely incorrect. Checking the RAM is as simple as checking the CPU, and both tasks are performed on the same screen. To determine how much RAM your machine has, just perform the following steps:

  • Right-click the Windows tab in the lower left-hand corner of your desktop and select “Run as administrator.” Click on System from the drop-down menu that appears. This information can be found under ‘System’ and beneath the CPU
  • It will tell you how much RAM the computer is currently using.

Checking How Big Your Hard Drive Is

When it comes to hard drive specifications, checking your hard drive is probably the simplest thing to do. For those who are unfamiliar with how to accomplish this, here is a straightforward approach for determining how much space is left on your hard drive. Follow these procedures to find out how much storage space your computer has:

  • Click the “This PC” option on the left-hand side of any folder you want to see on your computer
  • Navigate to the ‘Local Disk (C:)’ where you should see how much storage space you have available, as well as how much space is available for free
  • If further information is necessary, right-click the ‘Lock disk (C:)’ and select ‘Properties’ from the context menu.

It’s truly as straightforward as that. If you go into ‘Properties,’ you will find a chart that indicates the overall amount of space available as well as the amount of free space. The information provided will be accurate, but it will be the same as the information displayed beneath ‘Local Disk (C:)’ in terms of bytes available for storage. If you want to know whether your hard drive is an SSD or not, all you have to do is open up your disk defragment and optimize drive software. It will inform you if it is a Solid State Drive or not under the Media Type heading.

Once You’ve Found Out What Your Computer Specs Are

After all is said and done, you have two options: either put an ad on the internet with your newly discovered PC specs or determine whether or not you want to change anything in your present PC. If you decide to go the upgrade route, it’s important to note that it isn’t as simple as pulling out your old GPU and swapping it out with the newest and most powerful one. Everything must be compatible with a computer, which means that the Motherboard must be able to handle the new GPU. If this is the case, fantastic!

Are you sure you have enough RAM to operate the games and applications for which you purchased the GPU?

When considering about updating the hardware in your computer, you should ask yourself all of the questions listed above.

By determining the specifications of your computer, you will have the information you need to either conduct internet research to see which components are compatible, or chat with someone who will be able to offer the next best step.

If this sounds like a lot of work, you might want to look at our articles on the finest PC builds.

as well as our instructions to creating a computer. We offer a long list of amazing constructions that will relieve you of the bother and worry of conducting your own independent research and development.

Leave a Comment

Your email address will not be published. Required fields are marked *