- 1 How to do a Clean Install of Windows 10 the Easy Way
- 2 Option One: Create Installation Media and Install Windows from Scratch
- 3 Option Two: Perform a Reset and Remove Everything
- 4 Start met een schone installatie van Windows 10
- 5 How to perform a clean install of Windows 10
- 6 Before you begin
- 7 How to perform a clean install of Windows 10
- 8 2. Create a bootable flash drive
- 9 3. Boot the Windows 10 installer from the USB flash drive
- 10 4. Install Windows 10
- 11 5. Complete the Windows 10 setup process
- 12 Summary
- 13 How to do a clean install of Windows 10: Which option is best for you?
- 14 Install Windows 10 on SSD Effortlessly and Securely
- 15 Should I install Windows 10 to SSD?
- 16 Preparations before installing Windows 10 on new SSD
- 17 Method 1. How to reinstall Windows 10 on SSD using installation disc
- 18 Method 2. How to install Windows 10 on SSD from HDD without CD or USB
- 19 Quick fixes: can’t install Windows 10 on SSD
- 20 Further reading: how to install Windows 11 on SSD
- 21 Conclusion
- 22 How to Perform a Clean Install of Windows 10
- 23 How Do You “Clean” Install (Delete & Reinstall) Windows?
- 24 When a Clean Install Is Recommended
- 25 How to Clean Install Windows
- 26 Important Reminders
- 27 Clean Installing Windo.
- 28 Clean Install Windows 10 on Laptop/Desktop PC with A USB Drive
How to do a Clean Install of Windows 10 the Easy Way
Old data, settings, and applications from your prior Windows system are transferred over to your new Windows system as part of the Windows 10 upgrading process. With a clean install, Microsoft gives you the option of starting with a completely fresh system. This is particularly beneficial if you’ve just acquired a new Windows 10 PC that comes pre-installed with bloatware that you don’t want or need. Alternately, you may need to conduct a clean install on a machine that does not already have a Windows operating system installed after installing a new hard drive.
To obtain DVD playback, you may always install VLC or utilize one of the more fully featured Windows Media Center competitors, which are both available for free.
At one point in the past, customers were compelled to upgrade to Windows 10 before they could start again and perform a clean install, which was a very convoluted and time-consuming process.
Option One: Create Installation Media and Install Windows from Scratch
Where to Legally Download Windows 10, 8.1, and 7 ISOs (Related) With Windows 10, the traditional approach of completing a clean installation is still our preferred technique. You only need to download and prepare installation media, which may be either a DVD or a flash drive, and then install it from that media. Microsoft offers a free download of the Windows 10 media production tool. This application will download the right Windows 10 installation files for your machine and will guide you through the process of creating an installation DVD or USB flash drive using those files.
Choose the appropriate type of installation disk for the version of Windows 10 that has been licensed for your computer — either Windows 10 Home or Windows 10 Professional.
The 64-bit version will be preferred by the vast majority of users, but you may build installation media that contains both versions, and the installer will automatically choose the most appropriate one when you use it to install Windows on a computer.
Start your computer with the USB drive or DVD drive installed, and choose that device as the boot device.
Once the Windows installer begins, select “Install Now” to begin the installation process. Following that, you’ll be presented with the activation screen. What you do here is determined on your current situation:
- If this is the first time you’ve installed and activated Windows 10 on this machine, you’ll see the Windows 10 activation screen. In this field, type in your Windows 10 product key. Please insert your valid Windows 7, 8, or 8.1 key here instead, in the event that you do not have one. If you’ve already installed and activated Windows 10 on this machine, choose “I don’t have a product key.” Otherwise, select “I don’t have a product key.” Once Windows has been installed, it will begin to operate automatically.
The second scenario is possible because of the way Windows 10 activates computers. As part of the first installation and activation of Windows 10 on a system, the installer verifies that you have a “genuine Windows” system installed and registers your hardware with Microsoft’s cloud-based servers. If all goes well, you shouldn’t have to input the key again on the same computer since Microsoft will detect your hardware the next time you install Windows 10 on that machine, validate that it’s registered, and then automatically activate the operating system.
- When conducting a clean install, make sure to select the “Custom” option to ensure that you are not executing an upgrade install.
- The installer will replace any existing partitions on your computer if you just have one Windows partition.
- It should immediately activate itself once you connect to the Internet on your new, freshly installed Windows 10 PC after you log in for the first time.
- Select the “Activation” tab from the drop-down menu after clicking the UpdateSecurity button.
- In addition, take note of the Windows 10 edition that you have installed – either Windows 10 Home or Windows 10 Pro.
- When we reinstalled Windows 10 Pro on our machine, it was enabled very soon after installation.
- If it is not enabled, you may be able to find information below that may assist you with activating it.
- If an activation is not occurring automatically after going through the processes outlined above, the following command can be used to compel it to occur.
- Enter the following command: slmgr.vbs /ato into the command line: Many users have reported that they have to run this command multiple times.
If you see an error notice, try restarting your computer and running it again, waiting and running it again, or simply waiting and allowing Windows to activate itself. It’s possible that Microsoft’s servers are overloaded at the time you’re attempting to activate.
Option Two: Perform a Reset and Remove Everything
As a result of how Windows 10 activates computers, the second scenario is successful. As part of the first installation and activation of Windows 10 on a system, the installer verifies that you have a “genuine Windows” system installed and registers your hardware with Microsoft’s cloud-based services. If all goes well, you shouldn’t have to input the key again on the same computer since Microsoft will detect your hardware the next time you install Windows 10 on that system, validate that it’s registered, and activate itself automatically.
- When conducting a clean install, make sure to select “Custom” to verify that you are not executing an upgrade install.
- The installer will overwrite any existing partitions on your computer if you just have one Windows installation.
- It should immediately activate itself when you connect to the Internet on your new, freshly installed Windows 10 PC once you have logged in.
- This will guarantee that everything is properly configured.
- Check to check if “Windows is enabled” appears in this section.
- Windows 10 Home will be provided as part of the free upgrade from Windows 7 or 8, but if you previously had a Professional edition of Windows 7 or 8 installed, you will receive Windows 10 Pro as part of the free upgrade from Windows 7 or 8.
- However, if Microsoft’s activation systems are overburdened, it may take some time before your machine is fully activated and operational.
- While some users have reported needing to restart their computers many times, other users have just waited.
- Start by right-clicking the Start button or hitting the Windows Key + X and choosing Administrator Command Prompt from the context menu (Admin).
Try restarting and running it again, waiting and running it again, or simply waiting and letting Windows activate itself if you see an error warning. Because of the high volume of requests, Microsoft’s servers may be overburdened at the time you attempt to activate.
Start met een schone installatie van Windows 10
- Start the assistance program
- Read and accept the license terms and conditions. When you accept the Licentievoorwaarden, the hulpprogramma is activated
- You may choose which services you want to use. If you want to keep track of your personal belongings, use the option Allen persoonlijke bestanden behouden. -of- If you want to get rid of everything, choose danNiets.
- On the basis of your selection at this point, the assistance program performs a clean installation of Windows on your computer. All apps, including betaalde apps, that are installed either before or after the initial handmatig installation will be removed. Apps that are delivered as standard with Windows 10 (such as Mail and Edge) continue to function normally. Additionally, a number of your previously entered settings, including manufacturer-specific settings (such as Aan/out and Slaapstand), will be transferred to the Windows settings you specified. This has the potential to have an impact on the performance of your hardware
- Press the button to begin the installation. The rest of the program will run on its own, but you can make changes at any time up until the point at which your computer will restart.
How to perform a clean install of Windows 10
Having the ability to conduct a clean installation of Windows 10 is a valuable skill to have. It’s a must-have if you’re intending to construct your own computer from the ground up. If you’re having troubles with your system and have exhausted all other options, it’s the final resort. It’s also the only way to get rid of any pre-installed bloatware that came with the machine from the manufacturer. Going into the settings and pressing the reset button on Windows 10 is not the same as performing a clean install of the operating system.
When you perform a clean install, Microsoft provides you with a factory-fresh image.
If, on the other hand, it is exactly what the circumstance requires, then please allow us to assist you.
Aside from that, you’ll need an 8GB or bigger USB flash drive as well as some spare time to complete the project.
Before you begin
It is necessary to first check that you have a valid Windows 10 license before proceeding with the clean installation of Windows 10. If you already have Windows 10 installed on your computer, you can verify this by navigating to the ‘Settings’ program in the Start menu. From the sidebar, choose ‘UpdateSecurity’ and then ‘Activation’ to proceed. You’ll now see a notification stating that Windows 10 has been activated, either with a digital license or with a digital license that is tied to your Microsoft Account, depending on your configuration.
You will need to input the activation key throughout the installation process.
In addition, you should take the time to back up any vital files and data because this operation will totally wipe your computer.
How to perform a clean install of Windows 10
It is necessary to first check that you have a valid Windows 10 license in order to do a clean installation of Windows 10. If you already have Windows 10 installed on your computer, you may verify this by launching the ‘Settings’ application. From the sidebar, choose ‘UpdateSecurity’, followed by ‘Activation.’ You’ll now get a notification stating that Windows 10 has been activated, either with a digital license or with a digital license that is tied to your Microsoft Account, and that you may proceed.
Once your PC is connected to the internet, any previously active licenses will be re-activated. Remember to back up any vital files and data before starting this process since your computer will be erased entirely. Anton Watman / Shutterstock provided the image used in this article).
2. Create a bootable flash drive
Open the Media Creation Tool on your computer’s desktop. Select the option to ‘Create installation media for a different PC’ and agree to the terms and conditions of the license. The following step is to select a language, edition, and architecture for Windows 10 to be installed. For the most part, x64 architecture will suffice, and the edition will need to correspond to whatever you have a license for in order to function properly. All that’s required is that you choose both or x86 if you know you’ll be using it on a 32-bit computer.
Then select your flash drive from the list.
(Photo courtesy of TechRadar.)
3. Boot the Windows 10 installer from the USB flash drive
Once the Media Creation Tool has completed its work, you’ll need to connect it to the computer on which you’d want to do a fresh installation of Windows 10. First and foremost, in order for the installation to execute, you must instruct your computer to boot from the USB device rather than the internal SSD or hard disk. The BIOS is the most convenient place to accomplish this. If you’re putting together a new computer, this is also the only method to go about it. When you initially switch on your computer, you’ll be prompted to hit a key to access the BIOS, which may also be referred to as ‘Setup.’ It will vary from computer to computer, but it is likely to be anything like ‘F2’, ‘F12’, or ‘Delete.” Once you’re in the BIOS, navigate to the ‘Boot’ panel and make sure the USB drive you just created is listed first in the list of priority devices.
If you want to restore to your usual boot priority once Windows 10 has been installed, you may easily erase this setting.
4. Install Windows 10
The remainder of the process is rather basic. Your PC will be taken through the whole installation procedure after it has booted into the Windows 10 installer once it has been configured. Essentially, you’ll select the location where Windows 10 will be installed, and the application will take care of the rest. In the event that you need to input an activation key during the installation process, you’ll be given the option to do so throughout the procedure, but you may also do it later using the ‘Settings’ app.
As soon as the installation is complete and your computer restarts, either remove the USB flash drive from which you were installing Windows 10 or enter the BIOS settings to instruct your computer to boot from your specified Windows 10 disc.
5. Complete the Windows 10 setup process
It is necessary to complete the regular Windows 10 setup, which includes entering your network information, Microsoft Account credentials, and a variety of other options as needed.
The final step might include Windows 10 obtaining and installing the most recent updates, which could take some time. Once all of this is completed, you will be presented with a brand new, factory-fresh Windows 10 desktop.
The process of performing a clean installation of Windows 10 is not difficult, but it does take some time. Nonetheless, it is a vital component of PC construction, the most effective method of upgrading your current internal drives, and, in some cases, a simple solution for sluggish, bloated PCs. Fortunately, all you need is a USB flash drive and the following simple procedures to get back up and running again.
How to do a clean install of Windows 10: Which option is best for you?
A clean install is regarded as a time-honored procedure among Windows professionals, serving as a method of removing accumulated cruft and bringing an outdated PC back to life.
Install Windows 10 on your computer. Do you want Windows 10 Home or Windows 10 Pro? Which one do you want? Are you unsure? Microsoft has further information on the various Windows 10 editions. More information can be found at Clean installations have a plethora of absolutely valid reasons to be performed.
Possibly, you are repurposing an outdated but still functional computer for usage by another member of your family or by a member of your organization.
Alternatively, you may simply desire a fresh start.
- Installing and managing security and feature updates in Windows 10 is covered in detail in this article.
A clean install is the ultimate troubleshooting procedure since it is practically certain to eradicate performance or compatibility issues caused by third-party software, temporary files, configuration mistakes, and common viruses. A clean install may be performed on any operating system. The end result is a PC that starts from a known-good condition, with either the default Windows 10 setup or a previously tested configuration that contains particular third-party applications and drivers, depending on the configuration.
Here are the advantages and disadvantages of each strategy, as well as some suggestions on when to use each one.
Use a recovery image from the OEM
For those who acquired a PC with Windows 10 already installed, you may be able to restore the computer to its factory default state by selecting Restore from Factory Image. Because the stored image has all necessary drivers, tools, and hardware support to ensure that all of your devices function as intended as soon as you sign in for the first time, this is a welcome development. It’s a shame, because the saved image also contains whatever crappy software the manufacturer was paid to preinstall alongside your otherwise flawless Windows 10 installation.
Aside from the aforementioned crapware, the most significant disadvantage of this option is that you’re more than likely to end up with an out-of-date Windows installation, necessitating the installation of a time-consuming full feature update, followed by the most recent cumulative update, after your recovery has been completed.
When you start your PC in recovery mode, you may be presented with the choice to restore an OEM image from a dedicated partition, or your OEM may have included a tool that downloads the most recent image from their servers on your behalf.
In addition to recovery images for Dell, HP, Lenovo, and Microsoft Surface devices, see “How to acquire a free Windows (or Linux) recovery image for your OEM PC” for information on where to obtain recovery images for other OEM PCs.
Restore from a backup image
Because of the nature of this option, it is only available to those who are well-prepared and who utilized the classic Windows Backup software (Sdclt.exe) or an alternative third-party backup tool immediately after setting up their PC when it was first purchased. If you are one of the fortunate few, you are most likely reading this article from your luxuriously outfitted fallout bunker, which has a 12-month supply of canned food, pharmaceuticals, and bottled water neatly stocked on the shelves.
For those who use a big collection of third-party applications, such as custom device drivers, that are not available through Windows Update, this is a very enticing choice.
The drawbacks of this strategy include the additional time and work necessary to generate the backup, as well as the organizational skills required to maintain that backup safe and easily available when it is needed when it is needed.
It is possible, however, that the image depicts a Windows 10 version that you wish to use while skipping one or two succeeding feature upgrades will be considered a positive.
Use the Windows 10 Reset This PC option
When you use this function, which has been greatly modified since its introduction in Windows 8, it creates an entirely new copy of your current Windows version, removing any third-party drivers or applications that may be creating issues. You will not require any installation disks or product keys, and you will not be required to make any changes to your firmware settings in order to boot from an other device. You will not be able to reset your computer by accident. Generally speaking, the procedure consists of at least four phases that need you to make decisions, with one last affirmation that spells out in crystal plain words exactly what is about to take place.
To begin, go to SettingsUpdateSecurityRecovery and select the appropriate option.
Choose Keep My Files (which is the best option if you want to reuse the computer yourself) or Remove Everything (which is the best option if you’re selling the computer or handing it on to someone else) from the first set of options.
(If you’re resetting the PC for personal use, you may skip this step.) Beginning with Windows 10 version 2004, the Reset This PC option allows you to choose whether you want to reinstall Windows using the already installed copy or if you want to obtain a new copy of the operating system from the internet.
(Please keep in mind that this is an estimate.) If you want to start again in the shortest amount of time with the least amount of effort, the reset method is the ideal choice.
Note that if your system has been infiltrated by malware or if any system files have been destroyed or corrupted, a reset may not be effective.
Reinstall from bootable Windows 10 recovery media
This option provides you with the most amount of control over the clean installation procedure. It also necessitates higher-than-average technical abilities and, in most cases, some post-installation fiddling to verify that all hardware functions correctly and that the appropriate functionalities are available. There are three steps in the process:
- To begin, download the most recent installation files from theDownload Windows 10page and use the Media Creation Tool to build a bootable USB flash drive using the newest installation files. (See my FAQ, “Windows 10 updates: How to install, reinstall, upgrade, and activate,” for more information.)
- Finding the correct combination of keystrokes and/or incantations to boot directly from that drive into the Windows Setup application is then the next step to do. If required, you may use the built-in tools to reformat and/or repartition the destination hard disk. Your previous files will remain on your computer’s hard disk in a folder called Windows.old if you miss the formatting stage. Install Windows 10 at the end of the process. It is possible to skip beyond the portion where you are prompted to provide a product key if you are using hardware that has already been activated
- Windows will activate automatically once you log in for the first time.
You’ll need to use Windows Update to install the latest updates, which may contain hardware drivers for devices that aren’t included in a typical Windows installation. It is necessary to wipe away the Windows.old folder and then complete the remaining setup steps if you did not format the system disk prior to installing the operating system on it.
Install Windows 10 on SSD Effortlessly and Securely
I want to perform a fresh installation of Windows 10 on a new solid state drive (SSD) and make this the boot disk. I’d want to use the old WD 1T hard disk as a storage drive instead of throwing it away. What is the quickest and most straightforward method of removing the outdated Windows 10 operating system from an old hard drive? I’m not sure I understand how to correctly identify the operating system files. – A question from the Microsoft.com website
Should I install Windows 10 to SSD?
SSDs (short for solid-state disk) can be more reliable boot disks than hard disk drives (HDDs), which is certainly common information by now. SSDs are solid-state drives that are based on NAND flash memory technology and employ integrated circuit assemblies to store data in a permanent manner. It does not track down information using a physical spinning diskmovable read–write head, and as a result, it has a faster access time, reduced latency, less noise, and other advantages than hard disk drives.
So, what is the best way to install Windows 10 on an SSD?
Continue reading for additional information on specific techniques and more specifics.
Preparations before installing Windows 10 on new SSD
What is the best way to replace a hard drive with an SSD and install Windows on it? For many users, this may be a source of skepticism. As a result, I’m here to expose you to all of the preparations that must be made, and then lead you through each and every precise step of installing the operating system on a new SSD.
- Make certain that your data and system are protected. When performing a fresh or clean install, it is recommended that you make a backup of any files that are essential to you, as personal data on the previous hard drive will be deleted during the installation process. You might also create a backup of your system to protect against unexpected system failures
- This is especially crucial for beginners. Initialize and format the SSD in preparation for the Windows 10 installation. In general, a disk that has not been properly initialized cannot be utilized regularly. Aside from that, you may encounter an error message such as “You must first format the disk before you can use it.” If you are using a laptop or your computer only has one slot, you will need to prepare a SATA-to-USB converter or an encloser to connect the SSD. If you need to replace the hard drive in Windows 10, make sure you have a set of screwdrivers that are well-matched. Put the old drive on a diet (*if you want to move Windows 10 from the old HDD to the new SSD). Given that SSDs are often smaller than HDDs at the same price, it is advisable to free up space on the HDD by deleting backed-up personal data, cleaning unnecessary files using Disk Cleanup, uninstalling unnecessary programs, and so on.
Method 1. How to reinstall Windows 10 on SSD using installation disc
A clean install provides you with a whole new operating system that is identical to the one that was installed on your computer when you first turned it on – it just contains all of the junk that was loaded by the manufacturer. The operation will also uninstall the present Windows operating system and user data while the installation is taking place, if necessary. In addition, all of the personal data stored on the system hard disk will be erased. In order to prepare for Windows 10, you can back up the operating system to a USB drive or an external hard disk.
In order to install Windows 10 on SSD without using a CD or USB drive, as well as to keep your data and applications intact, you may use Method 2 to transfer Windows 10 from an HDD to an SSD drive.
The following are the most prevalent scenarios in which it is necessary to clean install Windows 10 on SSD:
- Replace a Windows 10 hard disk that is experiencing major troubles and install Windows 10 from a USB device or CD/DVD
- Would you like to wipe the SSD and start again with a fresh installation?
Follow the instructions below to cleanly install Windows 10 on an SSD using a USB drive: 1. Create a fresh installation media for Windows 10 that is accurate and complete. Produce installation media (USB flash drive, DVD, or ISO file) for another PC by downloading and running the Windows 10 Media Creation program. Then follow the instructions to create installation media for another PC. 2.Install the SSD and attach the Windows 10 installation disk to the computer. 3. Once Windows 10 installation disc has been created, shut down your computer and replace the old hard drive with the new solid-state drive (SSD).
- 3.Make the installation media the first boot option by selecting it as the first boot option.
- 4) On the first screen of the Windows Setup program, select ” Install Now.” 5.Enter your product key (digital license) or choose to skip this step.
- Select the “Custom” installation type from the drop-down menu.
- Delete or format the SSD and then create a new partition with the Newoption to prepare it for Windows 10 installation.
- Then, pick the new partition on the SSD disk and press the Next button.
- Note: Whether you are upgrading from Windows 7/8/8.1 or performing a clean install on a fresh new SSD, you will need to purchase a product key in order to activate Windows.
Method 2. How to install Windows 10 on SSD from HDD without CD or USB
A fresh installation of Windows 10 will completely wipe out all of your data on the PC. Furthermore, it is a time-consuming and complex process. If you want a simpler method of adding a new SSD to Windows 10 without the need for a CD or USB drive while still retaining all of your data, you might utilize a reputable third-party program such as AOMEI Backupper Professional. SSD cloning program for Windows 7/8/10/11 that includes “Disk Clone,” “System Clone,” and “Partition Clone” choices to fulfill the demands of different users.
- When you use the ” Disk Clone ” function, you may copy the contents of an entire hard drive to an SSD, even if the new hard drive is formatted in a different way. For example, you can copy an MBR disk to a GPT disk. It is possible to clone simply the C drive to an SSD without any further work using the ” System Clone ” option, which is particularly beneficial if you wish to move Windows 10 to a smaller SSD. By default, the software is running in ” Intelligent Clone ” mode, which will only clone the sectors that have been used in order to preserve space. Optionally, you can produce an unbroken duplicate by using the sector-by-sector method
- However, this is not recommended. The ” SSD Alignment ” option can be used to increase the writing and reading speeds of the target SSD. It may be used to clone any types of hard drives and solid state drives (SSDs), independent of the disk manufacturer, disk size, or interface.
Preparations for transferring the operating system to an SSD in Windows 10 include the following steps: Insert your SSD into the disk bay and verify that it can be identified. If there isn’t enough space within the laptop to accommodate additional drives, you may have to use a SATA-to-USB converter to connect the SSD. As an alternative, if you do not have a second hard drive bay or a SATA to USB converter, you may generate a system image and then restore it to the SSD using the “System Backup” option.
- The free trial may be downloaded from the link provided below.
- Use the following steps to install Windows 10 on an SSD without the use of a CD or DVD: 1.
- Instead of clicking “Disk Clone,” choose “Disk Clone” to clone the entire disk.
- Simply pick the SSD as the new location, and then click “Next” to proceed with the process.
- Confirm the actions, choose ” SSD Alignment ” to improve the performance of the SSD, then click ” Start Clone ” to install Windows 10 on the SSD without having to remove the hard drive.
- After copying merely the operating system to an SSD, you have the option of keeping the old disk as a secondary storage device or removing and discarding it.
- The AOMEI Backupper Technician software may be used to install SSD on an infinite number of PCs within a single organization.
You may deploy operating systems to several machines at the same time with the aid of AOMEI Image Deploy. AOMEI Backupper may be made portable so that it can be used on any computer without the need for a separate installation.
Boot from the new SSD
Installation of an SSD in a Windows 10 drive bay and ensuring that it can be identified are the first steps in the process of moving your operating system to an SSD. A SATA-to-USB converter may be required if there is insufficient space inside the laptop for additional drives to be installed. If you do not have a second drive bay or a SATA to USB converter, you can generate a system image and then restore it to the SSD using the “System Backup” option. Run AOMEI Backupper after it has been installed and started.
- In order to protect any essential data saved on the destination SSD, it is recommended that you create a backup before beginning the cloning procedure.
- Go to the home page and click on ” Clone,” then pick ” System Clone.” Instead, select “Disk Clone” to clone the entire disk.
- Confirm the actions, choose ” SSD Alignment ” to improve the performance of the SSD, then click ” Start Clone ” to install Windows 10 on the SSD without having to remove the HDD from the computer.
- The old disk can either be used as a secondary storage device or removed and discarded after copying solely the operating system to the SSD.
- The AOMEI Backupper Technician software may be used to install SSD on an infinite number of PCs within a single enterprise.
- AOMEI Backupper may be made portable so that it can be used on any computer without the need for a dedicated installation.
Quick fixes: can’t install Windows 10 on SSD
Occasionally, you will see error warnings such as the following: “Windows will not be able to be installed on this drive. “Windows cannot be installed on this disk because the selected disk has the GPT partition style,” “The selected disk has the GPT partition style,” It is possible that the machine’s hardware does not enable booting from this disk “In the event that you use installation media to reinstall SSD in a laptop or desktop computer running Windows 10. Why am I unable to install Windows 10 on my SSD?
It is possible that the first problem is caused by an incorrect boot mode.
Alternatively, you might investigate converting your MBR disk to GPT first, or you could utilize a disk cloning program that enables converting an MBR disk to GPT without altering partition style first to remedy the issue.
First and foremost, hard disk protection is enabled on your machine.
In order to resolve this issue, you must first study the specification and determine whether the issue is caused by hard disk protection. If this is the case, please delete it. If this is the case, please modify the controller mode in BIOS. If your BIOS displays AHCI, just change the setting to IDE.
Further reading: how to install Windows 11 on SSD
Because Microsoft has stated that Windows 11 will be released on October 5, some Windows loyalists and technophiles may choose to install Windows 11 in order to take advantage of the new and powerful features that Windows 11 will provide. Included among the new features are simple-to-use tools to assist you in optimizing your screen space, a taskbar that includes Chat and calling capabilities, and a Microsoft Store that allows Android apps from the Amazon App Store to be utilized. Follow this procedure to install Windows 11 on a solid-state drive (SSD).
No matter which method you use to install Windows 10 on SSD (clean install or clone System with a reputable disk cloning program), you should be able to complete the process successfully. If you experience the Windows 10 not installing to SSD issue, try the techniques listed above to resolve it before attempting to reinstall Windows. In order to save time and effort, the second approach should be used instead. And it will preserve all of your data in the same format as before. Additionally, this program supports the “Disk Clone” and “Partition Clone” features, allowing you to use it to clone an SSD to a bigger SSD, clone a hard drive to a WD SSD, clone a hard drive to a Samsung SSD, and replace the hard drive in an ASUS laptop, among other things.
Additionally, it allows you to activate daily/weekly/monthly automatic backup in Windows 10 and execute scheduled automated backups, as well as event triigers, incremental and differential backup, among other things.
How to Perform a Clean Install of Windows 10
We previously shown how to obtain a Windows 10 ISO for use in a clean installation. Today, we’ll demonstrate how to perform a complete clean installation of Windows 10 from scratch. We previously shown how to obtain a Windows 10 ISO for use in a clean installation. Today, we’ll go through the steps involved in performing a complete clean install of Windows 10 from the ground up in detail. Take a look at our post on how to cleanly install Windows 11 for more information.
Step 1. Configuring your computer’s BIOS*
If your computer is appropriately configured and instantly boots from a USB or DVD drive, you may not need to do anything further. When you restart your computer, you will see a page that says “Press any key to boot from USB/DVD.” You can select any key on your keyboard to proceed to the next stage. Starting with the Windows 10 installation media, which can be a DVD or USB flash drive, connect the computer to the internet. If you haven’t already, check out our post on how to make a Windows 10 USB flash drive for more information.
- For those of you who are using a laptop and are unaware of what your BIOS key is, a simple Google search like this should be able to assist you.
- It’s rather uncommon for the controls of each BIOS to be shown at the bottom of the screen (unless you’re lucky enough to have a GUI BIOS, in which case you’ll be able to browse using the mouse).
- Because I’ll be utilizing a DVD, I’ll put “CD-ROM Drive” at the top of the list.
- When you’re through with the boot order modification, use the right arrow key to get to the Exit section of the BIOS.
Following this, your machine should be able to restart and boot directly into the Windows installation disc. Note: If you are faced with the message “Hit any key to boot from.”, press that key! Otherwise, you will not be able to access the installation.
Step 2. Installing Windows 10
Following the reboot, you should be presented with the Language selection screen. Select your preferred language, time and currency format, as well as keyboard input, from this menu. Then click on the Next button to proceed. On the following screen, select “Install now” from the drop-down menu. Before you may proceed, you must first agree to the Microsoft End User License Agreement (EULA). Before selecting “Next,” take a moment to read it (or not) and check the checkbox. A clean installation will need you to choose the “Custom: Install Windows exclusively” option throughout the installation process.
- If you have many hard drives or partitions, the following step may be a little more challenging.
- It is preferable to completely remove these files rather than simply reformat them in order to ensure a completely clean installation.
- To create a new partition, select it and then click the “New” button on the toolbar.
- I would recommend that you keep the size as is and click “Apply.” Note: You will most likely be warned that Windows may create new system partitions during the installation process.
- The Windows installation process should now begin.
- to this in a couple of minutes.
- Warning: If the “Press any key to boot from USB/DVD.” box occurs when restarting your computer, you should stop.
- Pressing one will result in the installation being re-started from the beginning.
Step 3. Configuring Windows
Following the reboot, you should be welcomed by the screen shown below. Because the default Windows 10 settings are superb and do not significantly interfere with your privacy, we recommend that you use the Express settings. The option to customize the settings is available if you are insistent on turning off certain functions. Windows will now go through a number of configuration operations. Remember that frequent reboots are common at this point; simply leave the computer alone until you reach the “Create an account” page.
Once you’ve reached this screen, enter your new account information and click Next. Windows will now proceed to complete the final configuration steps.and will then boot directly to the Desktop. Congrats!
When it comes to Windows 10, there’s a lot to see and do – from changing standard settings to exploring the many new and interesting features. Here are a couple of things you may read right away to get started:
- Windows 10 Tip: From the Start Menu, search for apps by their first letter. Tip for Windows 10: You may add or remove system icons from your desktop. Tip for Windows 10: Add specific settings to the Start Menu. Tip for Windows 10: Pin websites from the Edge browser to the Start menu. Tip for Windows 10: Add your favorite music playlists to the Start Menu. Creating a System Restore Point in Windows 10 is simple and straightforward. What is the best way to create Live Tile Groups in the Windows 10 Start Menu? Gmail and other email accounts may be added to the Windows 10 MailCalendar. Increase the frequency at which the Windows 10 Mail App syncs
- Tip for Windows 10: Configure the Edge browser to open many web pages at the same time. How to Make Windows 10’s Default Apps Your Favorites
- How to Enable Hibernate Mode in Windows 10
- How to Enable Hibernate Mode in Windows 7. The steps to create a Windows 10 USB recovery drive are as follows: It is possible to transfer iTunes playlists to the Windows 10 Music App
- Rather of Quick Access, Windows 10 File Explorer should be opened on this computer. Increase the number of folder locations available on the Windows 10 Start Menu.
How Do You “Clean” Install (Delete & Reinstall) Windows?
- In order to do a clean installation of Windows, which is a last-ditch troubleshooting procedure, all data on the computer’s hard drive is deleted. It is suggested that Windows 10 users utilize theReset This PCprocess rather than performing a clean install. It is suggested that you perform a clean install of Windows 8, 7, Vista, or XP when resolving major difficulties.
This article describes how to perform a clean installation of Windows in an attempt to resolve major issues with your computer. It also contains instructions on how to prepare your computer for reinstalling your data when the clean install is complete.
When a Clean Install Is Recommended
Installing or reinstalling a fresh copy of Windows is the best option when all other software troubleshooting methods have failed and you wish to install or reload a fresh copy of Windows on your computer. The majority of the time, you try a clean install after one of Windows’ automatic repair methods has failed to resolve your issue. A clean installation restores your computer to a condition that is nearly identical to the one it was in on the first day you switched it on. To be clear, a clean install of the Windows operating system should only be performed for the most serious of Windows operating system problems since the data on your primaryhard drive partition (often theCdrive) is completely destroyed throughout the procedure.
How to Clean Install Windows
It is possible to perform a clean install of Windows during the Windows setup process by uninstalling the previous Windows installation (if there is one) prior to either installing or reinstalling the existing operating system. Prior to Windows 10, the individual steps necessary in doing a clean install might vary significantly depending on the operating system you are currently running. For example, with Windows 7, the following steps are required:
- How to Clean Install Windows 8
- How to Clean Install Windows 7
- How to Clean Install Windows Vista
- How to Clean Install Windows XP
Keep in mind that a clean installation of Windows will remove everything on the hard disk on which Windows is installed. When we say everything, we really mean it all the time. This technique will need you to back up everything you wish to keep before you begin! Backing up your files online or using an offline backup program are also options. Additionally, you should plan on reinstalling your applications in addition to backing up the particular data you wish to save. Obtain the original installation discs and downloadable program configurations for any programs that you want to reinstall on your computer and save them somewhere safe.
CCleaner includes a software list.
Clean installation as stated in the linked tutorials above may not be feasible if you only have a restoration disk from your machine maker and not an original Windows Setup disc or download.
You can go to the documentation that came with your computer, or you can contact the manufacturer of your computer directly for further information. Thank you for informing us about this!
Clean Installing Windo.
Warning: If you follow the instructions in this article, all of the files on the disk where you wish to install Windows will be destroyed – this is by design. If you have files of significant significance, please be certain that you have an effective backup policy in place before proceeding.
- Create a bootable USB flash stick by using theMedia Creation Tool from Microsoft (see Resources). This will also erase any data that may have been saved on the USB flash device.
It is recommended that you unplug all storage devices from the computer, with the exception of the primary (C Drive) disk, before installing Windows 10.
- Start by booting into the USB drive that contains the Windows 10 Media
- Enter your system’s BIOS and set the USB media as the first boot priority (this can usually be found under the boot tab), or simply look for the words “boot menu” when you see your BIOS boot screen and press the corresponding function key to select your USB flash drive as the first boot priority (this can usually be found under the boot tab).
- Continue to the next step until you reach the license key screen. Either input your license code or, if Windows has already been installed on this computer, select the “I don’t have a product key” link from the drop-down menu.
- Continue to the “Which sort of installation do you want?” page until you reach the end of the process. “Custom” should be selected.
- Select Delete from the context menu of each partition on the target device. If you remove all of the partitions from your computer, you will be left with unallocated space. At this point, click on the next button.
- Windows will now begin to download and install. When it is finished, your computer will automatically restart
- When your screen turns black, remove your installation USB disk from your computer. You will be presented with the configuration screen after the computer has completed its restart. Configure the system to your liking.
You have successfully completed the installation of Windows 10.
Clean Install Windows 10 on Laptop/Desktop PC with A USB Drive
Installing Windows 10 has been a success for you.
- If you have already activated Windows 10 on this computer, you will not be required to do so again
- Simply click on the “Skip”button to go to the following step. After the installation is complete, your computer will be immediately enabled. If the previous operating system on this computer was Windows 7/8/8.1, you may use the Windows 7/8/8.1 product key to activate your Windows 10 system
- Otherwise, you can use the Windows 10 product key. If the previous operating system on this computer was Windows XP or Windows Vista, you will have to pay to obtain a Windows 10 Product key.
Step 17: Read and agree to the licensing conditions, then click “Next.” Choosing the “Custom Install”installation type is the final step. 19:Pick the partition where you wish to install Windows, then select the formatting option. The partition you selected will be formatted as a result of the formatting operation. After you’ve structured your document, click on “Next.” Step 20: The Windows 10 installation process begins, and your computer will restart numerous times in order to copy Windows files, prepare files for installation, install features, and update automatically.
Choosing “Use Express settings” or clicking on “Customize settings” after Windows 10 has been installed will allow you to configure the settings that you like.
- The Best Methods for Backing Up Your Windows 10 System In this tutorial, you will learn how to install Windows 10 Full Version on a virtual machine. Install the full version of Windows 10 using the Media Creation Tool
- How can I revert back to Windows 7/8 after upgrading to Windows 10? Windows 10 System Restore on the Surface Pro 4: 5 Tips to Make the Best Decision