How To Create A Windows 10 Bootable Usb

Contents

Create installation media for Windows

Installing a new copy of Windows, doing a clean installation, or reinstalling Windows may all be accomplished with installation media (a USB flash drive or DVD). If you need help creating installation discs, go to the program download website, where you’ll find detailed instructions on how to do so. There, you may choose a Windows version and generate your own installation media, which can be either a USB flash drive or a DVD, according to your preferences. For a direct connection to one of the versions, click on one of the following links:

  • The following operating systems are supported: Windows 7
  • Windows 8.1
  • Windows 10(Then selectDownload tool now. )
  • Windows 11(Then selectDownload tool now. )

Here’s what you’ll need to get started on creating the installation media:

  • A computer with a dependable internet connection is required. The amount of time it takes to download will vary depending on your internet connection. A USB flash drive or a DVD is required. A blank USB flash drive with at least 8 GB of storage capacity, or a blank DVD is required for this project (and DVD burner). We recommend that you use a blank USB drive or blank DVD since any data stored on them will be erased. If you are attempting to burn a DVD from an ISO file and are informed that the disc image file is too big, you will need to use dual layer (DL) DVD media
  • Otherwise, you will need to use single layer (SL) DVD media. A product key is required. Your product key is a 25-character string (not required for digital licenses). For assistance in locating it, see Find your Windows product key.

The installation DVD can then be used to reset or reinstall Windows after it has been prepared. Windows recovery options.

How to create a Windows 10 bootable USB: It’s easier than you think

Keep a USB boot disk on hand in case you need to reinstall Windows 10 on your computer at any point. Photograph by Josh Goldman for CNETT Even though troubleshooting an old and sluggish computer is not a pleasant experience, it is something that you can handle on your own at home. In addition to checking for typical problems, you should also build a bootable USB stick to use during your investigation. I understand what you’re going through. A twinge of fear swept over me the first time I heard the phrase “bootable USB drive.” It’s quite OK for you to do so as well.

  • You should not be intimidated in any way.
  • A bootable USB drive for Windows 10 is something that everyone who has a Windowscomputer should perform at some point in their lives.
  • This is also one of the last items you’ll need to complete your gaming PC setup if you’re doing it yourself.
  • 5.
Get the CNET How To newsletter

Get professional advice on how to use your phone, computer, smart home devices, and other devices. Tuesdays and Thursdays are the days for delivery. With the exception of an empty 8GB USB drive and a Windows PC, you’ll need to set aside at least 30 minutes, and maybe more depending on your internet speed. For those who are interested, it is feasible to construct a Windows 10 boot disk on a Mac, but the procedure is time-consuming and necessitates experience with Terminal, the Mac’s command-line interface.

I just constructed my own gaming machine, and despite my limited familiarity with Terminal, I discovered that utilizing a Windows computer was a safer and more straightforward procedure.

Use Microsoft’s media creation tool

To download the Windows 10 system image (also known as an ISO) and make your bootable USB drive, Microsoft provides a specific program that you can use to complete the process. 1.Go to this page, scroll down to the section titled Create Windows Installation Media, and click on the Download tool now button to begin. To begin, double-click the file named MediaCreationToolxxxxxxxx in your downloads folder to begin the process. In this case, the final four numbers of the file name represent the Windows 10 version number).

  1. Choose Create installation media from the small list of possibilities that appears on the screen.
  2. 3.
  3. Then selectCreate installation media (USB flash drive, DVD, or ISO file) for a different PC and clickNext.
  4. Jason Cipriani/CNET contributed this screenshot.
  5. You’ll be prompted to choose the language, edition, and architecture that you wish to utilize in the program.
  6. You may alter any of the settings by unchecking the box next toUse the suggested options for this PCand selecting an option from the drop-down menu that appears.
  7. It’s important to note that, according to Microsoft’s support website, if you want to use this tool to flash a different version of Windows 10, such as Windows 10 Pro (or vice versa), it will be included when you pick Windows 10 as the Edition when you select Windows 10.

Select a USB flash drive from the drop-down menu.

After you’ve made your selections, click Next.

To proceed, click on the Next button.

Jason Cipriani/CNET contributed this screenshot.

Finally, choose the USB drive from the drop-down menu.

Choosing the incorrect drive might have disastrous consequences, since this operation would delete everything on the disk while it is running.

Even though it’ll take some time to finish, Microsoft’s tool will take care of everything else for you.

From there, Microsoft’s tool will take care of the rest for you.

Depending on your internet connection speed, the procedure should take around 30 minutes, give or take.

In the future, if you need to install or reinstall Windows, you may attach the disk to your computer and restart it from the command prompt.

It may be necessary to reboot your computer into its BIOS firmware – this is often accomplished by hitting Esc, F2, or a similar key when the machine is booting up – in order to change the boot drive or “bootmenu” to your flash drive if it does not automatically boot to it.

As soon as you power on your computer, you’ll see a little line of text instructing you on which button to push in order to access the BIOS.

You may also use the media tool to upgrade from Windows 7 to Windows 10, if you follow the steps outlined in the following section.

Following the successful installation of Windows 10, here are some pointers to get you started. If reinstalling Windows 10 seems like a daunting task, follow these steps to troubleshoot and expedite the process.

How to Create a Windows 10 Bootable USB : HelloTech How

If you have a Windows 10 computer, it is a good idea to make a bootable USB stick that contains your operating system (operating system). You may use this method to fix a computer that won’t switch on or connect to the internet by installing or reinstalling Windows 10. Here’s how to make a bootable USB drive for Windows 10. Ensure that you have the following items ready before you begin the process.

  • The availability of a dependable internet connection
  • The following items: a USB drive with at least 8 GB of empty space
  • Your 25-character product key (you will not be required to enter this for digital transactions)

Download the Media Creation Tool in order to make a bootable USB drive for Windows 10. Then launch the program and selectCreate installation for another PC from the drop-down menu. Finally, selectUSB flash driveand wait for the installation to complete its work before proceeding.

  1. Connect a USB flash drive to your Windows 10 computer. It is possible that you may need to format your USB drive to exFAT. Our instructions on how to format a hard disk for Windows 10 can be found here
  2. If you need more information, see our FAQ. Then go to Microsoft’s website to get the Windows 10 Media Creation Tool from their server. Select the Download tool now option, which will be located under the Create Windows 10 installation media heading. Double-click the MediaCreationToolxxxx.exe file to begin the process of creating the installation media. If you have downloaded this file, it should be in yourDownloadsfolder or wherever you have downloaded it to. The final four numbers of the file name represent the version of Windows 10 that is being used
  3. Then, in the pop-up box, choose “I accept.” Next, select theCreate installation media option from the drop-down menu. Select the language, architecture, and edition that you want to use to generate the bootable USB that you want to use to boot from the USB. You can look into it. Utilize the suggested selections for this PCbox to continue to use the same language, edition, and architecture that you are already using on your current computer. You may also alter the choices by selecting them from the drop-down menu. You can chooseBoth from theArchitecturedrop-down box if you’re not sure whether you’ll need a 64-bit or a 32-bit architecture
  4. After that, selectUSB flash driveand clickNext
  5. And last, click Finish. To utilize a detachable drive, choose it from the list and then click Next. In the event that you have more than one device attached to your computer and are unclear which one to use, detach the other drives from your computer. Please click Refresh drive list if you do not find the drive you are looking for. The Media Creation Tool will then begin to download the most recent Windows 10 installation files to your computer, which will take a few minutes. This procedure can take around 30 minutes. Finally, press the Finish button.

Make sure that you have a bootable USB drive with the Windows 10 installation on it by going to File Explorer and checking your disks under This PC in the list of available devices. It is recommended that you rename your drive to something like USB-ESD (Electronic Software Delivery). Opening the disk should reveal boot files and a setup.exe file, which you can run to complete the installation. In order to install or reinstall Windows, you can connect the disk to your computer and reboot it at this point.

If this is the case, double-click the setup.exe file on your computer’s hard disk to begin the installation procedure.

You may learn how to verify the specifications of your computer by reading our article here.

How to create bootable USB flash drive to install Windows 10 • Pureinfotech

It is possible to produce a Windows 10 USB installation disk using a variety of programs, which we will demonstrate in this post. When a new version of Windows 10 is released, not everyone has access to the most recent version on the same day it is made available. Instead, Microsoft refreshes PCs in stages, and it may take some time until the new version is available on all of the devices. For those who don’t want to wait for the automatic update, Microsoft now offers the option of downloading and installing Microsoft’s Windows 10 operating system via the Media Creation Tool.

Moreover, you may make use of third-party software like as Rufus to download and produce a bootable disc from which you can install Windows 10 from a USB drive.

  • Create a bootable USB drive for Windows 10 using the Media Creation Tool. Rufus may be used to create a bootable USB drive for Windows 10.

The following are the procedures to follow in order to build a Windows 10 USB installation disc using the Media Creation Tool:

  1. Microsoft’s OpenMicrosoftsupport website Click theDownload tool nowbutton, which is located under the “Create Windows 10 installation media” section. To start the utility, double-click the MediaCrationToolxxxx.exe file on your computer’s desktop. To accept the offer, click on the Acceptbutton. Choose theCreate installation media (USB flash drive, DVD, or ISO file) for another PC option
  2. Then click Next. Click theNextbutton twice more
  3. Then click theNextbutton once more. Please keep in mind that if you are ready to make a Windows 10 USB drive for another device, you may also clear the “Use the suggested settings for this PC” option to ensure that you choose the right language, architecture, and edition. Select the USB flash drive option from the drop-down menu. To proceed, click theNextbutton. Please ensure that the USB flash drive is selected from the list and that it does not contain any vital data because this operation will delete everything on it. Next, click the Finishbutton
  4. Last, click the Nextbutton.
You might be interested:  How To Delete Downloads On Windows 10

After you have completed the instructions, you may boot your computer from the USB device and install Windows 10 using the UEFI or BIOS boot options.

Create Windows 10 bootable USB with Rufus

Use the following procedures to build a bootable disc for installing Windows 10 from a USB drive using Rufus on UEFI or BIOS devices:

  1. OpenRufus’website
  2. Click on the “Obtain” link in the “Download” section to download the most recent version. To start the utility, double-click on the executable file. Towards the bottom of the page, click on theSettingsbutton (the third button from the left)
  3. Using the “Check for updates” drop-down menu in the “Settings” section, choose the Daily option from the list of options
  4. To close the window, click theClosebutton. To exit the application, click theClosebutton once again. Reopen theRufustool if necessary. To build bootable media from a USB flash drive, navigate to the “Device” section and choose it from the drop-down menu. Quick tip: You will need to connect a USB flash drive with a minimum storage capacity of 8GB. It is possible that you may need to restart the program if the device is not shown in the list. Under the “Boot selection” section, utilize the drop-down box to pick either the disk or the ISO image as the boot medium. Select theDownload option by clicking thedown arrowbutton on the right side of the screen. To download, click on theDownloadbutton. Choose the Windows 10 option and then click the Continuebutton. Select the version of Windows 10 to be downloaded from the “Release” portion of the page. To proceed, click theContinuebutton. Select an edition, such as Windows 10 Home or Windows 10 Pro, or Windows 10 Education
  5. Then click Next. To proceed, click theContinuebutton. Choose the language in which the installation will take place. Continue by clicking theContinuebutton
  6. Then select the operating system architecture you want to use (x64orx86). You may wish to pick thex64 option if your device is more recent. To download, click on theDownloadbutton. Automatically choose the location where the Windows 10 ISO will be saved
  7. After the download is complete, leave the default settings in place. To begin, press theStartbutton
  8. To confirm the deletion of the data on the USB flash drive, press theOKbutton.

You will be able to boot and install Windows 10 on PCs that are operating on either UEFI or BIOS, depending on the firmware version you have installed. The Activation troubleshooter software may be launched from theSettingsUpdatesecurityActivation menu item if Windows 10 has not been activated after the upgrade has been completed. The following update was made on January 17, 2022: This guide was first published in August 2015, and it has since been changed and updated to reflect the most recent updates and improvements.

Information on our privacy policies.

Any information is used at the user’s own risk.

Information on our privacy policies.

How to Install Windows 10, 8.1 or 7 Using a Bootable USB

When it comes to installing a new version of Windows on your laptop, you have a plethora of options to choose. If your computer does not have a CD or DVD drive, you may want to learn how to install your operating system from a “bootable USB” drive in order to get your computer up and running quickly. The CD or DVD drive is no longer present in the majority of current PCs and laptops, rendering installation CDs superfluous and unnecessary. However, while this isn’t a problem in many areas, such as video games and movies, it may be problematic when it comes to software installation in other cases.

This article will go into detail on what a bootable USBis and how to utilize one to produce installation media for multiple Windows operating systems, such as Windows 10, 8.1, or even Windows 7 installation media.

Benefits of installing Windows with a bootable USB

There are several situations in which you may be required to replace your operating system or obtain a completely new one. For example, if you encounter a significant issue, your hard drive becomes damaged or corrupted, or if you’re upgrading or downgrading your system, you’ll need to reinstall Windows. The essential installation files for the Windows operating system must be downloaded and saved before you can reinstall or install the operating system on your computer. This will allow you to boot into the system and install it.

Use a different device nearby if this is not possible, or contact a friend or family member for assistance if this is not possible.

The only way to produce or utilize installation media is for it to be stored on a bootable USB drive, which is not feasible at this time.

USBs are extremely accessible due to the fact that practically every computer is equipped with a USB port that can be used to connect external devices to the computer.

It’s the quickest and most efficient technique of installing an operating system on a computer. Nowadays, you may construct a bootable USB drive that can be used to install several versions of Windows.

How to create a Windows bootable USB with the Media Creation Tool

Before you can use a USB drive to install Windows, you must first produce the installation media for Windows. When the USB flash drive is linked to your computer, this will be read by the computer, allowing it to boot from the USB drive. The instructions below will walk you through the process of creating a bootable USB flash drive using the Media Creation Tool provided by Microsoft.

  1. Visit Microsoft’s website and download the relevant installation media:
  • Download Windows 10
  • Download Windows 8.1 Disc Image (ISO File)
  • Download Windows 7 Disc Images (ISO Files)
  • Download Windows XP Disc Images (ISO Files)
  1. Follow the on-screen instructions to download the Windows version you choose. Depending on your version, you may be required to enter your Windows product key in order to validate your eligibility to download disc images
  2. This is standard practice. Download and save the Media Creation Tool to your computer’s hard drive. When the download is complete, run the file and select Accept when requested to accept the terms of the software license. Make a selection ofCreate installation media (USB flash drive, DVD, or ISO file) for another PC and then press theNext button
  3. Set your desired language, Windows edition, and System Architecture by following any on-screen instructions that may appear. Use the suggested selections for this PC option if you’re unsure
  4. Otherwise, continue with caution. Pick the USB flash drive from the drop-down menu, and then select your USB from the list. The Windows installation files will begin to download to your USB drive as soon as you plug in your device. Please keep in mind that depending on your internet connection, the download may take a long time. Make sure you don’t interrupt the process until the bootable USB device has been successfully made.

Here’s a quick overview of how to boot from a USB drive. To begin, you must first create the USB drive, which will be read by your computer and used to boot it from it. In this section, you will discover instructions on how to make a bootable USB drive using the Media Creation Tool provided by Microsoft.

  1. Using your web browser, navigate to theMicrosoft Download Windowspage and click on theDownload tool nowbutton. Download and save the utility to your computer’s hard drive. When the download is complete, run the media production tool and select Accept when requested to accept the tool’s terms and conditions. Select To install a new PC, create installation media (a USB flash drive, DVD, or ISO file) for it and then click on the Next button. Choose your desired language, Windows 10 edition, and system architecture from the drop-down menu.
  1. Put a checkbox next toUse the suggested options for this PCoption if you are unable to modify the settings
  2. Otherwise, continue.
  1. Select the USB flash drive from the drop-down menu, then press the Next button and select your USB disk from the list. The Windows installation files will begin to download to your USB drive
  2. Depending on your internet connection speed, this process may take a long time to complete. Please refrain from interfering with the process until the creation tool has been developed.

How to boot from USB? Change your computer’s boot order

It is necessary to understand how to boot from a USB drive once you have created installation media. This is required in order to install Windows from a bootable USB drive. The secret is that you must adjust the sequence in which your computer boots. The USB flash drive will be positioned first in the boot order priority list as a result, allowing your computer to view the files stored on it first. This will cause your computer to request you to load the installation disk instead of the system that is currently installed on your machine.

Following the completion of this step, your machine will instantly boot from USB and use the installation disc you produced, therefore initiating the Windows installation process during the next startup sequence.

How to Install Windows using Bootable USB

After successfully changing the boot order of your computer to allow it to boot from a USB device first, you may proceed to install Windows using the installation file included on your USB drive. Note:Before you begin the installation, create a complete backup of all of your files to ensure that you do not lose any important information.

How to install Windows 10 using bootable USB

  1. In order to use your USB device, connect it to your computer’s USB port and turn on the computer. It is possible that you may be prompted to hit a key in order to boot from the USB drive. Select your chosen language, time zone, currency, and keyboard options from the dropdown menu. Once you’ve finished modifying these parameters, click the Next button. (Please keep in mind that these options can be altered at any time after the Windows 10 installation has been completed. ) ClickInstall Now, choose the Windows 10 edition that you purchased from the drop-down menu. Afterwards, clickNext to begin the installation procedure
  2. Select the sort of installation you want. You may either choose Upgrade, which will enable you to maintain your current data, settings, and applications, or Custom, which will do a whole new installation from scratch. The custom option will be selected in this example in order to do a new Windows installation
  3. Windows requires a partition on your hard drive to store system data
  4. This partition will be designated as the primary C: disk during the installation process. Select an existing partition and format it, or remove everything and create new partitions if you don’t want to use an existing partition. If you’ve erased all of your current partitions, the space on your hard drive will be completely unallocated, and you’ll have to start over by creating new partitions. If you have just formatted an existing partition, you can go to Step 7 right away. For the purpose of creating new partitions, follow these steps:
  5. Now pick the partition where you wish to install Windows and clickNext. The process of installing Windows 10 will begin. During the procedure, your computer may need to reboot a few times. After the installation is complete, your computer will automatically restart for the last time. This is perfectly normal. When it starts up for the first time after being shut down, you’ll be able to select more of your preferences, or you may utilize the Microsoft-recommended express settings. To finish, sign in to your Microsoft account in order to access One Drive and to take use of some of the new capabilities included with Windows 10, such as password recovery. You may skip this step if you don’t want to sign in with your Microsoft account and instead follow the steps to establish a local user account.

How to install Windows 8.1 using bootable USB

  1. In order to use your USB device, connect it to your computer’s USB port and turn on the computer. It is possible that you may be prompted to hit a key in order to launch from the USB drive
  2. Select your chosen language, timezone, currency, and keyboard settings. Once you’ve finished modifying these parameters, click the Next button. It is not necessary to be concerned if you have made a mistake since you can always correct it in the future. ClickInstall Select the Windows 8.1 edition that you purchased from the drop-down menu. Afterwards, clickNext to begin the installation procedure
  3. To activate Windows, you must enter the product key that was included with your purchase. When you’re finished, click Next.
  • Please keep in mind that you may not be requested to enter a product key until later in the Windows 8.1 installation process. This differs from one version to the next.
  • Accept the terms of the licensing agreement and then click Next
  • Select the type of installation that you like. You may either pick Upgrade, which will enable you to maintain your current data, settings, and programs, or Custom, which will allow you to perform a whole new installation of Windows 8.1 from scratch. The custom option will be selected in this example in order to do a new Windows installation
  • First and foremost, you must erase all the current partitions before performing a complete fresh installation with new partitions. Remove the checkmarks next to each partition and click Delete, then OK
  • Note: If you haven’t yet made a backup of your hard drive, you may want to pause what you’re doing, back everything up, and then restart. Once you’ve destroyed the partitions, you won’t be able to retrieve any of the data that was previously saved on these hard disks.
  1. The space on your computer’s hard disk will now be available for use. Following that, you’ll need to create a few new partitions on your computer. Choose from a variety of driving alternatives (advanced). ClickNew and then select the size of your new partition from the drop-down menu
  2. Then clickNext. As a result, Windows will create a new partition for the purpose of storing system files. To accept, click on the OK button. If you want to create more divisions, simply repeat the previous procedure. Format one of the newly created partitions by selecting it and clicking Format. This will allow you to format the new partition that has been created. When prompted, choose “OK” and repeat the process for any other partitions, with the exception of the one used to store system files. Continue by selecting the partition where Windows will be installed, and then clickingNext. The installation of Windows 8.1 will begin at this point. During the procedure, your computer may need to reboot a few times. This is quite normal. When you are told to modify your computer settings, follow the steps carefully.
You might be interested:  How To Delete Files On Windows 10

How to install Windows 7 using Bootable USB

  1. In order to use your USB device, connect it to your computer’s USB port and turn on the computer. It is possible that you may be prompted to hit a key in order to boot from the USB drive. Select your chosen language, timezone, currency, and keyboard options from the drop-down menu. Once you’ve finished modifying these parameters, click the Next button. It is not necessary to be concerned if you have made a mistake since you can always correct it in the future. To begin the installation process, select Install Now from the drop-down menu. Accept the terms of the licensing agreement and then click Next
  2. Select the type of installation that you like. You may either pick Upgrade, which will enable you to maintain your current data, settings, and programs, or Custom, which will do a new clean installation of Windows 7. Upgrade is the default option. The custom option will be selected in this example in order to do a new Windows installation
  3. First and foremost, you must erase all the current partitions before performing a complete fresh installation with new partitions. Remove the checkmarks next to each partition and click Delete, then OK
  • Note: If you haven’t yet made a backup of your hard drive, you may want to pause what you’re doing, back everything up, and then restart. Once you’ve destroyed the partitions, you won’t be able to retrieve any of the data that was previously saved on these hard disks.
  • The space on your computer’s hard disk will now be available for use. Following that, you’ll need to create a few new partitions on your computer. Choose from a variety of driving alternatives (advanced). ClickNew and then select the size of your new partition from the drop-down menu
  • Then clickNext. As a result, Windows will create a new partition for the purpose of storing system files. To accept, click on the OK button. If you want to create more divisions, simply repeat the previous procedure. Format one of the newly created partitions by selecting it and clicking Format. This will allow you to format the new partition that has been created. When prompted, choose “OK” and repeat the process for any other partitions, with the exception of the one used to store system files. Continue by selecting the partition where Windows will be installed, and then clickingNext. Once the installation is complete, you’ll be prompted to enter the names of the users and computers on your network.
  • Keep in mind that the built-in Administrator account is deactivated in Windows 7, which means that the username you establish will be the only one that is available on the system at first.
  • Fill up the blanks with your login. The computer’s default name will be username-PC, where username is the username that you’ve supplied, but you may modify this if you want to be more specific. When you’re finished, click Next. Once you’ve finished, either type in the new user’s password or leave it blank, and then click Next
  • Consider creating a password for your Windows 7 account and remembering to put it somewhere secure. This will be the sole user account that will be created on this system. If you forget your password, you will be unable to log into your Windows machine in the future.

That’s all there is to it! You have now successfully installed a new copy of Windows on your computer using a bootable USB drive. Depending on your manufacturer, you may want to perform a Windows update the next time you start up your computer to ensure that you have the most up-to-date firmware and drivers; otherwise, you should be good to go with your new Windows machine. Continue reading How to Create a Bootable USB Drive Using Rufus to learn more.

Frequently Asked Questions

When you want to boot your computer from a USB stick, you must first insert the USB stick into your computer and power it up. If the installation media does not start immediately, you must first modify the boot order of your computer. This may be accomplished using the BIOS settings. Q: In order for a bootable USB to work with Windows 10, what format should it be in? In order to operate the Windows 10 installer media, your USB flash drive must be formatted in the FAT32 file system. Q: What is the minimum size of a USB flash drive necessary for the Windows Media Creation Tool?

Prior to using the tool, make sure that it is absolutely devoid of everything.

You may learn all you need to know about the Rufus USB program by reading our articleHow to Create a Bootable USB Using Rufus.

No. The Windows ISO file contained on the USB stick is designed to be used to install Windows on the licensed user’s own PCs after it has been downloaded and installed. If you’re a business owner, you may be forced to prove any digital licenses you have when an audit is conducted on your company.

Final Thoughts

If you want further assistance, ourHelp Centerprovides hundreds of guidelines to aid you with your search. We invite you to return to our site for more helpful articles, or to contact our professionals for quick assistance.

One More Thing

Would you want to be notified about promotions, offers, and discounts that will allow you to purchase our items at the best possible price? Don’t forget to sign up for our newsletter by providing your email address in the box below. Be the first to know about breaking news by receiving it in your email.

You May Also Like

Use Rufus to create a bootable USB flash drive. Instructions on How to Install Microsoft Office Updates» Installing Office on a Windows PC Using My Online Microsoft Account is a simple process.

How to Make a Bootable Windows USB Install / Recovery Drive

(Photo courtesy of Shutterstock.) A bootable USB flash drive for Windows 10 may be easily created using Microsoft’s wizard. This handy little all-purpose utility may be used to install whatever version of Windows 10 that it happens to include. Because it is bootable, it may also be used as a bootable recovery disk in the event that your computer is unable to boot. In other words, you may tell your computer to boot from the USB device by interrupting the standard startup routine. Then, by specifying this drive as your boot source, you will be able to use the Windows Recovery Environment (WinRE) that it includes to perform repairs on any Windows 10 PC or to perform a clean installation of Windows 10.

  1. This is especially useful when a computer gets a blue screen of death (BSOD) or refuses to boot, and you need to solve the problem or access data on the boot disk to do so.
  2. 1.Place a blank USB flash drive into your computer’s USB port.
  3. If the field is not blank, it should be noted that it will be overwritten.
  4. 3.Click on Download tool now, which is located under the heading “Create Windows 10 installation media.” To create bootable recovery media, download the Media Creation Tool from the Download Windows 10 page and run it.
  5. I normally rename this file to add the Windows Version at the end of the string, so that it becomes MediaCreationTool21H1.exe, which is what it was originally named.
  6. It begins by informing you that it is “getting a few things ready.” Please be patient as this process may take a minute or two.
  7. Accept the MCT’s request so that it may begin creating bootable recovery CDs for your computer.

Make sure to choose “Create installation media” before continuing, otherwise you will be forced to update the PC you are now using.

As shown in Figure 4, most of the time, the settings from your working PC will match those of your target PC, so you may leave them unaltered.

Change should only be made when absolutely required.

If you select ISO, you will subsequently need to write the ISO to a Flash drive, thus choosing this option saves you a step.

(Photo courtesy of Tom’s Hardware.) 8.Select your USB Flash drive from the storage device drop-down list.

All of the material will be rewritten if this happens.

Once you’ve decided on a destination drive, go to the next step.

(Photo courtesy of Tom’s Hardware.) The MCT will download a fresh copy of the Windows 10 installation files to your local C: drive, which will be accessible using Windows Explorer.

It took roughly 2 minutes on my machine, which was made possible by a gigabit Ethernet connection provided by Spectrum.

As the content for Windows 10 downloads, MCT updates the status of the download in percentages.

I’m not going to take a screenshot of this step.

When you’re finished, you’ll receive a report that says “ready,” similar to the one shown in Figure 8.

When the MCT has finished writing the bootable files on the disk, it will notify you that it is complete.

The MCT then flees the scene. You now have a brand-new, ready-to-use bootable USB flash stick that has Windows 10 version 21H1 (or whatever version is current as you read this).

Booting Your Windows 10 Install USB

The boot procedure of a Windows PC can be interrupted prior to the Windows loader being started by pressing a function or special key on the computer that is being booted. On my latest Lenovo PCs, the BIOS informs me that pressing the proverbial “any” key will cause the computer to restart from the beginning. If I go down that path, I’ll have to use the F12 function key to get to a different boot menu. If you are able to boot into Windows, you can instruct your computer to boot from the USB device when it restarts.

Now, your computer will restart promptly and will present you with the Recovery environment as an option when it first starts up.

This drive may be used to do a clean installation of Windows 10 on your computer by executing setup.exe from the root folder of the drive when your computer is booted to it.

On the other hand, you can choose to update your PC to the version of Windows 10 that is now installed on your USB flash drive if you so like.

How to Make a Windows 10 USB Using Your Mac – Build a Bootable ISO From Your Mac’s Terminal

DVD drives are no longer included with the majority of new PCs. As a result, installing Windows on a new computer might be a hassle. The good news is that Microsoft has developed a program that allows you to install Windows from a USB storage device (or “thumbdrive” as they are often called). But what if you don’t have access to a second PC for the purpose of configuring the USB storage device in the first instance? In this video, we’ll walk you through the process of setting things up on a Mac.

  • Absolutely everything we’re going to do here is completely legal and sanctioned by Microsoft, and we couldn’t be happier.
  • Unless you have a really old machine, you will almost certainly want the 64-bit version.
  • If you want a Windows version that is not in the English language, or if you require an earlier update version, you should download the ISO image from this page.
  • Although the ISO file is only approximately 5 gigabytes, I recommend that you use a USB drive with at least 16 gigabytes of space.
  • Insert your USB drive into the Mac’s USB port.
  • This may be accomplished using MacOS Spotlight by pressing the and Space bar at the same time, then typing “terminal” and pressing the enter key.
  • In a moment, I’ll tell you exactly what commands to type into your computer.
You might be interested:  How To Disable Cortana Windows 10

Then put the word “terminal” into the search box and pick Terminal from the drop-down list that appears.

Copy the text that I have highlighted here.

Format your USB device to the Windows FAT32 file system next.

It’s important to note that if your drive wasn’t nameddisk2, you need substitute the name of your drive from step 3 fordisk2.

Run the following command, making sure to use the right disk number for your USB: diskutil eraseDisk MS-DOS “WIN10” GPT /dev/disk2 diskutil eraseDisk MS-DOS “WIN10” After that, you’ll see something like this in the terminal.

Please keep in mind that, depending on your hardware, you may need to use this command instead, which partitions the drive using the MBR format rather than the GPT format.

diskutil eraseDisk MS-DOS “WIN10” MBR /dev/disk2 diskutil eraseDisk MS-DOS “WIN10” We’re going to prepare our downloaded ISO file so that we may copy it to our USB drive later on today.

However, your file is most likely placed in your/Downloadsfolder with the name Win10 1903 V1 English x64.iso.hdiutil mount and is accessible through the command line.

As a result, I’ll demonstrate how to copy it over independently.

Before you begin, execute the following command to copy everything except the install.wim file:rsync -vha -exclude=sources/install.wim /Volumes/CCCOMA X64FRE EN-US DV9/* /Volumes/WIN10 Then use the following line to install Homebrew (assuming you don’t already have it installed on your Mac):/usr/bin/ruby -e “$(curl -fsSL)” to complete the installation.

Then go ahead and create the directory that you’ll be using to store the files you’ve been working on: create a directory called /Volumes/WIN10/sources After that, execute this command.

Don’t get rid of it.

Wimlib-imagex splits the wim file into two files that are less than 4 gigabytes in size (I use 3.8 gigabytes in the following command), and then copies them to your USB drive:wimlib-imagex split /Volumes/CCCOMA X64FRE EN US DV9/sources/install.wim 3800 3800 3800 /Volumes/WIN10/sources/install.swm 3800 Once that is completed, you may eject your USB drive from your Mac using the Finder application.

The USB device should now be recognized by your computer, and it should boot directly from it.

When Windows detects this, it will display a screen and begin the installation process.

Take pleasure in your new computer and your freshly installed copy of Windows. Learn how to code for nothing. More than 40,000 people have benefited from freeCodeCamp’s open source curriculum, which has helped them land careers as developers. Get started today.

Create a Windows 10 USB Bootable Flash Drive (Updated)

An examination of the application Rufus, which can be used to generate a bootable USB flash drive for Windows 10, and which is really considerably faster than the tool provided by Microsoft. The Windows 7 USB/DVD Download Tool is typically recommended when making bootable USB devices for Windows, and this is the case here (time to update that name Microsoft). Nonetheless, I’ve had some difficulties establishing one and have been exploring for an alternative solution. I decided to give Rufus, a free program, a shot this time around because it was available for download.

In the end, it was far faster than the older Microsoft program that I was accustomed to using.

It will allow you to update your Windows 7 SP 1 or Windows 8.1 PC, or you may download the ISO file to use later for a clean install of the operating system.

In order to learn more about this, please see our article:How to Download Windows 10 ISO for a Clean Install (in English).

Create Windows 10 Bootable USB Drive

As previously stated in this post, be certain that you have downloaded the Windows 10 Technical Preview by enrolling in the Windows Insider Program. Make sure to use a USB device with at least 4 GB of storage space for the 32-bit version and 8 GB of storage space for the 64-bit version. One of the first amazing things about Rufus is that it doesn’t require any installation, which means you can put it on a network share or another external disk and run it from anywhere. When you launch it, the process of configuring it is straightforward.

  1. Select the USB drive you wish to utilize, and then choose a partition scheme.
  2. After that, simply press the Start button, and you should be up and running in minutes.
  3. Fortunately, I did not do so, and my bootable disk turned out just fine.
  4. Please let me know how quick your USB 3.0 or 3.1 device is if you are using one.
  5. Share your thoughts on this tool as an alternative to Microsoft’s Windows 7 USB/DVD Tool; for my part, I will continue to use Rufus – at least until Microsoft updates or recreates a new utility, assuming it does anything at all – if at all.

And, of course, you can use this to produce different versions of Windows or Linux distributions from an ISO image if you so like as well.

How to Install Windows 10 From a Bootable USB Drive

Do you need to reinstall Windows from the beginning? A USB flash drive may be used to boot up Windows 10 (as well as Windows 7 and XP). With just a few clicks, you may have a whole new version of Windows installed on your desktop computer, laptop, or media center. Learn all you need to know about installing a new copy of Windows 10 from a bootable USB stick in this comprehensive guide.

Why Boot a Windows Installation From USB?

The use of a bootable USB stick is ideal if your spare PC does not have an optical drive or if you have run out of DVDs to use on it. After all, a USB stick is small and portable, and you can be confident that it will work with virtually any desktop or laptop computer. While some computers may be missing a DVD drive, all computers are equipped with a USB port. It is also more expedient to install Windows 10 from a USB flash drive. A USB drive can be made bootable much more quickly than an optical drive, and it can also be used to install the operating system much more quickly than an optical drive.

Before you begin, check to see that your USB flash drive has been properly formatted.

Ensuring USB Stick Has UEFI Boot Support

To understand the difference between UEFI and BIOS before downloading a bootable Windows installation image, it’s vital to first understand what they are. Computers that are more than a decade old rely on the basic input/output system (BIOS) to boot up and handle data between the operating system and peripheral devices. For the past decade, UEFI (Unified Extensible Firmware Interface) has taken the place of BIOS, while also extending compatibility for legacy hardware. When it comes to PC diagnostics and repair, UEFI can aid without the need for extra software or media.

In other words, whatever solution you select should be compatible with your gear.

Preparing the Windows 10 Bootable USB

In order to begin, you must first enter your formatted USB flash drive into your computer or laptop. Are you prepared to install Windows 10? Even though there are other options, the Windows 10 Media Creation Tool is the quickest and most straightforward technique. To obtain this, navigate to theMicrosoft Download Windows 10 website and click on theDownload tool now button. Download and save the utility to your computer’s hard drive. It’s just about 20MB, so it shouldn’t take too long if you have a fast internet connection.

Create a Bootable USB Installer for Windows 10

Once the media production tool has been downloaded, activate it and select Accept when requested. Then:

  1. Install software on another computer via creating installation media (USB flash drive(s), DVD(s), or ISO file(s). Next, select your favorite language from the drop-down menu. Make sure you have the right Windows 10Edition and systemArchitecture installed. To make modifications, uncheck the option labeled Make use of the suggested settings for this computer
  2. HitNext
  3. ChooseUSB flash drive, then Next, and then choose the USB drive from the list that is displayed. ClickNextagain

After completing this final step, the Windows 10 installation files will be downloaded. Wait for the bootable USB Windows 10 installer to be built before continuing.

The length of time it takes will be determined on your internet connection speed. It is planned to install many gigabytes of data. Using a library or your place of employment as a download location if you don’t have a fast internet connection at home is an option.

Installing Windows 10 With a Bootable USB Drive

After you’ve prepared the installation media, you’ll be able to install Windows 10 from a USB drive. Due to the fact that the USB drive is now bootable, you can simply disconnect it from your computer and insert it into the target device. After you’ve started the machine on which you’ll be installing Windows 10, wait for it to recognize the USB drive. If this does not occur, restart the computer, this time using the key that allows you to reach the UEFI/BIOS or boot menu. Check to see that the USB device has been recognized, and then choose it as the primary boot device.

You are now ready to begin the installation of Windows 10, so start the installation procedure.

Please keep in mind that some installation may need to proceed after you log in, so please be patient.

The most recent version of Windows 10 will be installed as a result of this action.

How to Install Windows 7 From a Bootable USB Drive

Is there a point at which you’ve had enough of Windows 10? If you have a valid Windows 7 license, you may also use a bootable USB stick to install the operating system. The procedure is substantially the same, with the exception that you won’t have to worry about UEFI compatibility on older PCs. The fact that Windows 7 is a very lightweight operating system makes it an excellent choice for modern computers. Support for the operating system, on the other hand, will be discontinued in January 2020.

For more information, please see our comprehensive guide on installing Windows 7 using a bootable USB drive.

How to Reinstall and Repair Windows 10 From USB

Following the installation of Windows 10 from the bootable USB drive, you may believe that you may simply re-use the USB drive. While this is OK, it may be preferable to leave it as a dedicated Windows 10 installation and repair drive for the time being. The explanation for this is straightforward. A USB stick may not only be used to install Windows 10, but it can also be used to replace Windows 10 if the disk is damaged. You may thus rely on the USB stick to reinstall Windows 10 if it is not operating in the manner that you would have expected.

  1. Turn off the computer that has to be reinstalled
  2. Insert the USB flash drive
  3. Start the computer by pressing the power button. In the meantime, wait for the bootable Windows 10 disk to be identified (you may need to alter the boot order as described above). Configure the Language, Time and Currency Format, and Keyboard to fit your needs, and then click Next. Ignore the Install button and instead select Repair your computer from the drop-down menu. SelectTroubleshoot Reset this computer
  4. There are two alternatives available to you: Keep my files andRemove everything are both options that will result in Windows 10 being reinstalled from the USB stick, one with your files maintained and one without
  5. Both options will result in Windows 10 being restored from the USB stick with your files kept and one without

When you’ve finished reinstalling Windows 10, everything should be back to the way it was before you started.

Keep Your Bootable Windows 10 Installation USB Drive Safe

Making a bootable USB stick for Windows is straightforward:

  1. Format a USB flash drive with a capacity of 16GB (or greater)
  2. Microsoft’s media production tool for Windows 10 is available for download. To download the Windows 10 installation files, use the media creation wizard from the Start menu. Make the installation discs for the software
  3. Eject the USB flash drive from your computer.

The USB boot disk should be kept safe, even if you should expect Windows 10 to be quite trouble-free in terms of computer performance. It’s true that you never know when a hard disk drive may fail or when a partition table will get corrupted. When Windows 10 fails to boot, a variety of repair tools are available on the Windows boot disc that can be employed. Maintain a backup of the boot disk in a convenient location where it may be quickly recovered for troubleshooting or reinstalling Windows at a later time.

Having a backup copy of Windows 10 on hand is always a good thing to have.

Read on to learn more about the author.

He has vast expertise in desktop and software assistance, as well as in writing and editing. Christian, a contributor to Linux Format magazine, is a Raspberry Pi tinkerer, a Lego enthusiast, and a vintage gaming enthusiast. Christian Cawley has more to say.

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

Leave a Comment

Your email address will not be published. Required fields are marked *