- 1 Prevent programs from starting automatically in Windows
- 2 Before you begin
- 3 Remove a shortcut
- 4 Disable items not in the Startup folder
- 5 Remove a registry entry
- 6 How to Disable Startup Programs in Windows
- 7 Disabling Startup Programs in Windows 7, Vista, or XP
- 8 Disabling Startup Programs after Windows 10’s April 2018 Update
- 9 Disabling Startup Programs in Windows 10 or 8 or 8.1
- 10 Disabling Startup Programs in CCleaner
- 11 How to Stop Windows 10 Apps From Launching at Startup
- 12 Disable Startup Apps in Windows Settings
- 13 Research an App
- 14 Manager Apps
- 15 How to Disable Startup Apps on Windows 10
- 16 Basic Computer Skills: Disable Applications from Running on Startup
- 17 How To Remove Programs From Startup In Windows 10
- 18 Disable startup programs using Task Manager
- 19 Disable startup programs via the Settings app
- 20 Delete startup programs from Startup folder
- 21 Remove startup programs using CCleaner
- 22 10 Startup Programs You Can Safely Disable to Speed Up Windows
- 23 Why Should You Disable Startup Programs?
- 24 Commonly Found Startup Programs and Services
- 25 Managing Your Startup Programs and Services
- 26 To Keep or Not to Keep
- 27 Suggestions For What You Should Allow to Start-Up
- 28 Speed Up Your PC By Disabling Startup Programs
- 29 How to Disable Startup Programs in Windows 10 (Full Tutorial)
- 30 How to disable specific startup programs
- 31 How to remove programs on startup with the Registry Editor
- 32 Conclusion
- 33 How to make Windows start up faster
- 34 How to startup apps in Windows 10
- 35 How to remove startup programs using Task Manager
- 36 How to remove Startup Programs in Windows 10 [Full Guide]
- 37 Windows 10 Guide to remove Startup Programs
- 38 Frequently Asked Questions
Prevent programs from starting automatically in Windows
On this page you will find:
- Before you begin, consider the following: Disable objects that are not in the Startup folder
- Remove a shortcut
Before you begin
Frequently, a program will start immediately as a result of a shortcut in theStartupfolder of themenu. It is also possible for the software to start automatically from a registry entry. To remove applications from automatic startup, perform the steps outlined below in reverse chronological order. After you have completed each set of actions, restart your device to verify if the problem has been resolved or not. You can then go to the following set of instructions if you feel it is required.
Remove a shortcut
Please keep in mind that the shortcut will stay in the Recycle Bin until you remove it. To delete a shortcut from the Startupfolder, follow these steps:
- Press the Win -r key. In the “Open:” box, enter the following path: C:ProgramDataMicrosoftWindowsStart MenuPrograms StartUpPressEnter
- Right-click the application you don’t want to start up at startup and select “Close” from the context menu
You may repair a shortcut that is referring to the incorrect program in your Startupfolder by doing the following:
- Right-click the relevant icon in the Startupfolder and pick the following options: To use the tab key, press it. Check that the path statement in the “Target:” field leads to the right program’s filename in the “Target:” field. If it does not, enter the exact path of the application
- Otherwise, leave it blank.
Disable items not in the Startup folder
It is possible that certain startup items do not have a shortcut in the Startupfolder. You may disable them by using either the Startup apps/tasks tool in Settings or the Task Manager to do the necessary actions. They are only available through the registration if they are not already registered. In the event that you are new or uncomfortable with registry modification, you should make use of these programs.
- Start by typing startup programs (Windows 11) or startup tasks (Windows 10) into the Windows search box and pressing Enter. It is possible that a list of programs will be displayed in the window that appears when your device is first powered on. To turn off an application, turn the switch to
- Navigate to the Task Manager and click on it. If required, click on the tabs to see them all at once. thetab should be selected
- Choose the object that should not be launched upon starting and click
Remove a registry entry
This document offers instructions for altering the registry. Caution: If you make a mistake when modifying the registry, it is possible that Windows may fail to start or will be impossible to boot, in which case you will have to reinstall Windows. Please note that you are editing the register entirely at your own risk. Before making any changes to the registry, make a backup copy of it. If you are not confident in your ability to alter the registry, do not proceed with these instructions. Instead, enlist the assistance of a computer support service provider.
- Press the Win -r key. Typeregeditinto the “Open:” area and hit the Enter key
- To create a backup copy of the registry, choose the following option from the drop-down menu:
- Make a note of where the file will be saved
- By default, it will be saved on your computer’s desktop. Give the file a descriptive name, such as registryorregback, so that you can easily identify it as the backup of your registry file
- And Make certain that the “Export Range” field is chosen, and then press the “OK” button. This will create a backup of a currently operational registry
- On make it larger, click on the (+ symbol) to the left. Increase the size of the tree. Then expand, then expand again, and again
- The folder should be highlighted. There are applications that are scheduled to launch on startup that are displayed on the right side of the screen and are not necessarily included in theStartupfolder. Some of these programs, such as antivirus programs and firewalls, may be critical to the operation of the computer. In addition, there may be applications that are unpleasant or useless, such as spyware and marketing software. To begin, you’ll need to determine what is necessary and what isn’t. Select any program(s) that you do not wish to start automatically and then hit theDelkey to stop them. Keep in mind that uninstalling applications from this page does not erase them from your computer
- Rather, it only prevents them from automatically running. Changing the register has no effect right away, therefore you do not need to save your changes beforehand. If you want to, you may just close the Registry Editor at this time.
A documentadlfin is a knowledge base entry that contains documentation. This page was last updated at 15:37:21 on December 15, 2021.
How to Disable Startup Programs in Windows
The greater the amount of software you have installed on your computer, the longer it may appear to take for Windows to boot up. Many apps add themselves to the list of programs that are launched when your computer is first booted up, and this list can get rather lengthy. Editor’s Note: Obviously, our more techie readers are already aware of how to accomplish this, but this post is intended for the general public. Please feel free to forward it to your non-technical friends! If you are running Windows 8 or Windows 10, you should continue reading.
Disabling Startup Programs in Windows 7, Vista, or XP
It’s a good idea to have some programs, such as anti-virus and firewall software, start automatically when Windows starts. However, running most applications during boot-up wastes resources and increases startup time for the vast majority of them. MSConfig is an utility that comes pre-installed with Windows that allows you to quickly and easily examine what applications are running at launch and deactivate the programs that you like to run on their own after starting as necessary. Disabling starting applications in Windows 7, Vista, and XP is possible with the help of this utility, which is freely accessible.
- If you are unsure about how to use it, simply follow the instructions in this post and you should be OK.
- The program will launch.
- When you see the word “msconfig.exe,” either click on it or press Enter if it is highlighted in yellow or red.
- On the System Configuration main window’s Startup tab, select “Startup.” After that, a list of all the startup applications appears, with a check box next to each item on the list.
- Once you have made your selections, click on the OK button.
A dialog box appears, informing you that you may need to restart your computer in order for the modifications to take effect. To restart your computer instantly, use the Restart button. In the event that you are not prepared to restart your computer, choose Exit without restart.
Disabling Startup Programs after Windows 10’s April 2018 Update
The new Starting Apps control panel in Windows 10, which is available if you’re using the most recent version of the operating system, makes it extremely simple to disable startup apps. Simply visit the Settings panel, search for “Startup,” and then select the Startup Apps panel from the list that appears. It’s possible that you don’t have the most recent version installed, in which case you’ll need to manage your starting applications using the Task Manager (keep reading this next section). You may simply toggle the items on the Startup Apps panel that you do not want to execute at startup after you have it installed.
Disabling Startup Programs in Windows 10 or 8 or 8.1
Disabling starting apps in Windows 8, 8.1, and 10 is a simple and straightforward process. Simply launch Task Manager by right-clicking on the Taskbar or by pressing CTRL + SHIFT + ESC on your keyboard, selecting “More Details,” navigating to the Startup tab, and then pressing the Disable button. This will completely disable the program. It’s simply that straightforward. It’s important to note that if you don’t see these alternatives, be sure you click on “More Details,” which is located in the same location as the “Fewer details” option in this picture.
Disabling Startup Programs in CCleaner
Similar Article: How Computer Manufacturers Are Paid to Make Your Laptop Worse The free PC-cleaning tool may be downloaded here. CCleaner also includes a feature that allows you to deactivate apps that start up automatically. The list of startup applications may be viewed by selecting the Tools button on the left-hand side of the dialog box and then clicking Startup to display the list. The Enabled column specifies whether or not each software has been configured to start automatically with Windows.
In addition, you can re-enable apps that have been deactivated before.
RELATED: How to Use CCleaner Like a Pro: 9 Tips and Tricks (Part 2) There is a Professional edition of CCleaner available for purchase for $24.95 that includes priority technical assistance.
It is important to note that some apps must be adjusted to prevent them from starting themselves when the machine starts, otherwise they would simply add themselves to the list of beginning programs again.
How to Stop Windows 10 Apps From Launching at Startup
Adobe Acrobat, iTunes, and Spotify are just a few of the apps that start up automatically when you enter into Windows, whether you want them to or not. It’s one of the most infuriating elements of Windows, and it’s one of the most frustrating aspects of any operating system. Antivirus and camera software are examples of the sorts of apps you would wish to have start up automatically on your computer. Many applications, on the other hand, unnecessarily intrude into your starting procedure, sapping your computer’s memory and resources and potentially degrading its overall performance.
Windows has always provided a mechanism for you to manage your starting applications, including the ability to see and disable them.
In Windows 10, you may access these options through the Settings screen or the Task Manager. Here’s how to deal with those pesky starting applications.
Disable Startup Apps in Windows Settings
Go to SettingsAppsStartup to get a list of all the applications that may be set to start up automatically and decide which ones should be turned off or disabled. The switch displays whether or not the application is presently running in your startup process by displaying the status of On or Off. Turning off an app’s switch will cause it to be disabled. An indication indicating impact is located below the switch. There are four possible impact indicators that may be applied to an app, ranging from “no impact” to “low impact” to “medium impact” to “high impact.” These indicators evaluate the influence that a starting application has on the CPU and disk drive of your computer when it first starts up.
When deciding which programs to remove from your launch process, pay particular attention to those with a High or Medium rating, because deactivating them will have the largest impact on the speed with which your system boots up at startup.
PCMag-Recommended Windows Accessories
Go to SettingsAppsStartup to get a list of all the applications that may be set to start up automatically and decide which ones should be deactivated if necessary. To show whether or not that application is now in your starting process, a status switch displays the words “On” or “Off.” Turning off an app’s switch will cause it to be unresponsive or inoperable. An indication indicating impact is located beneath the switch. There are four possible impact indicators that may be applied to an app, ranging from “no impact” to “low impact” to “medium impact” to “high impact” These indicators evaluate the influence that a startup application has on the CPU and disk drive of your computer when it first starts up.
Consider deactivating the programs that have a High or Medium rating when deciding which ones to remove from your starting process, since doing so will have the largest impact on the speed with which your system begins to boot up.
Research an App
For apps that you can’t identify by their name or publisher, right-click on them and choose the entry for Properties from the drop-down menu. This opens the File Properties box, which may show more information about the file.
Recommended by Our Editors
You may use the right-click menu to look up information on a certain program that you’re not sure whether or not you should disable from running at startup. Windows launches a Bing search on your web browser in order to find the app in question. Searching through the findings will provide information and suggestions on whether or not the software should be prevented from starting in subsequent sessions.
The final aim should be to utilize the Startup Impact status, in conjunction with the information you uncover from online searches, to determine which applications should be turned off.
You may use the right-click menu to look up information on a certain program that you’re not sure whether or not you should disable from starting at startup. The software is found through a Bing search, which is performed in your web browser. Searching through the findings will provide information and recommendations on whether or not the program should be prevented from starting. Final objective should be to use the Startup Impact status in conjunction with the data you acquire from internet research in order to select the appropriate apps to deactivate.
AutoRun is a free tool for power users that displays not just starting apps, but also browser extensions, scheduled tasks, services, drivers, and other related information as they are executed. Searching through the enormous number of items might be perplexing and scary at first; you don’t want to accidentally deactivate a vital and crucial app or other component while doing so. AutoRuns, on the other hand, is a strong and effective startup manager if you comprehend all or the majority of the items given.
Another free application is Starter, which displays a list of all the programs, processes, and services that are now running. You have the option of seeing all objects or narrowing the list by selecting a folder location or Registry entry. Prior to attempting to disable an item, you can modify its settings to influence how and when it starts up in the future. To observe what the starter item performs, you may simply run it right from Starter and watch what happens. Starter even gives you the ability to customize the appearance, style, and functions of the utility.
With the free version of Startup Delayer, you may take a different approach to the traditional startup management tactics. Startup Delayer begins by presenting all of your startup items, as well as any currently running processes and services, on the screen. Click on any item to read its attributes, start it to see what it does, search Google or the Process Library for more information, deactivate it or postpone it by using the right-click menu. If you want to postpone the commencement of a program, you may specify how long it should be allowed to run before it begins to load in order to prevent several programs from loading at the same time.
Our Top-Rated Windows Laptops
For professional tips on how to get the most out of your technology, subscribe to the TipsTricks newsletter. , first published at: 2021-09-30T21:23:24.000000Z, last published at: 2021-09-30T21:23:13.000000Z, created at:null, updated at: 2021-09-30T21:23:24.000000Z” x-show=”showEmailSignUp()”>” x-show=”showEmailSignUp()”>” x-show=”showEmailSignUp()”
Like What You’re Reading?
Sign up for theTipsTricksnewsletter to receive professional tips on how to make the most of your technology.
How to Disable Startup Apps on Windows 10
When you boot your computer, having a large number of applications running slows down the process. Here’s how to deactivate some of them and speed up your startup. Windows 10 is a lightweight operating system that is quick to respond. However, if you have a large number of applications configured to start up when you log in, this can significantly slow down the startup process. Many of the applications you download and install will automatically include themselves in the boot process. Reviewing how to deactivate starting programs/apps on Windows 10 in order to make the boot process faster once more is necessary.
- Alternatively, you may use the keyboard shortcut Windows Key + I to launch Settings.
- On the following screen, in the left panel, select Startup from the drop-down menu.
- You can navigate down the list and turn off the programs that you don’t want to be running any longer.
- For example, you can see here that Microsoft OneDrive has a significant influence.
- It’s also worth mentioning that you have the ability to arrange applications by name, startup effect, or status, among other criteria.
Disable Startup Apps via Task Manager
Disabling starting applications can also be accomplished the old-fashioned way, as it was in previous versions of Windows. The steps are as follows: Step 1:Right-click on an empty space of the taskbar and selectTask Manager from the context menu that appears. Step 2: When Task Manager appears, select the Startup tab and go through the list of applications and apps that have been enabled to execute when the computer first starts up. Then, to prevent them from running, either choose the app and click theDisablebutton, or right-click on one and selectDisablefrom the context menu that appears.
- You may sort by startup impact, name, or status, just as you can in Settings; however, you can also sort by publisher.
- For example, in this table, I’ve included a column for “CPU at startup.” You can end up installing so many apps that you lose track of what they’re all for.
- If it doesn’t work, you might try searching for the app on the internet.
- I’m going to disable everything except a few apps when I’ve finished setting up a new computer.
- Afterwards, you may disable it if it’s something you require immediate access to.
- Make your way through the list and uninstall everything that isn’t absolutely required – especially any programs that have a significant influence on startup time.
- and the answer is a straightforward: none!
- Some items, on the other hand, will not be available when you need them.
- Although it is not an exact science, you can experiment to determine which applications are causing the starting process to be delayed when you log in.
You haven’t upgraded to Windows 10 yet? Check read our articles on how to deactivate starting applications on Windows 7 (which is no longer supported) and Windows 8.1 (which is supported).
Basic Computer Skills: Disable Applications from Running on Startup
Disable applications from running on startup
You may not be aware of it, but your computer automatically launches a number of apps as soon as it is turned on. While this is required for your computer to work properly, having too many apps active at launch might cause your computer to slow down. Another technique to keep your computer operating smoothly is to prevent apps from starting up at startup. This will enhance the overall speed of your computer.
Consider before disabling anything
Consider if it is necessary to prevent an application from launching before you do so. Most apps do not require disabling, but disabling those that you do not use on a regular basis or that are resource intensive can make a significant difference in how quickly your computer responds. If you use the application on a daily basis or if it is required for the proper running of your computer, you should leave it enabled when your machine starts up. If you aren’t sure what a software is or what it does, you can look it up on the Internet by its name or by its function.
Disable in a program’s own settings
Some apps include a built-in setting that allows you to choose whether or not they should launch on startup. It varies from program to program, but it is normally found in a settings or configuration menu. Many apps do not have a starting option since most operating systems can automatically determine which programs should be launched when the machine is first booted up.
Disable in Windows 8 and 10
In Windows 8 and 10, the Task Manager contains a Startup tab that allows you to control which apps run when the computer first starts up. When using a Windows computer, you may enter the Task Manager by hitting the Ctrl+Shift+Esc keys together, followed by the Starttab button. If you don’t want a certain software to run on startup, you may choose it from the list and click theDisablebutton.
Disable in Windows 7 and earlier
The procedure is a little more difficult with Windows 7 and older versions of the operating system. The System Configuration utility, often known asmsconfig, is where you’ll find these options.
- Locate the search box in the Startmenu by opening it. Note: If you’re running Windows XP, go to the Start menu and selectRun from the right-hand side of the screen. Typing msconfig in either the search box or the Run dialog box and pressing Enter will do this. In the System Configurationwindow, select the Startuptab from the drop-down menu. The check boxes to the left of each application’s name indicate whether or not the program is launched on startup. To apply your changes, click theApplybutton when you’ve finished making your selections.
In contrast to the Task Manager in later versions of Windows, the System Configuration utility in previous versions of Windows can contain important Windows processes, unlike the Task Manager. Make certain that you understand what you’re disabling, or you might end up damaging your operating system!
Disable in OS X
- After clicking on the Appleicon in the upper-left corner of your screen, go to the System Preferences menu. UsersGroups may be found in the System Preferences window. To access the Login Itemstab, navigate to the UsersGroups window and click it. Click the minus button to remove a program from the startup list, or click the plus button to add an application to the list if you want it to run when the computer first starts up.
How To Remove Programs From Startup In Windows 10
Your current location is: Home»Windows 10»How To Disable Programs From Starting On Startup In Windows 10 One of the most effective methods to reduce the time it takes for Windows to boot is to prevent unnecessary apps from loading with the operating system. The default settings of the Windows operating system are used by programs such as Skype, Evernote, and TeamViewer when they are launched automatically. In prior Windows 7 editions, the ability to remove or deactivate starting items could be found in the System Configuration program, which was accessible from the Start menu.
In Windows 8/8.1 and Windows 10, the same function has been relocated to the Task Manager menu bar. Throughout this post, we’ll look at the top four most straightforward methods for removing apps from the Windows 10 launch menu. Method number one of four
Disable startup programs using Task Manager
1st step: Launch Task Manager by simultaneously hitting the Ctrl, Shift, and Esc buttons on your keyboard. Alternatively, you may right-click on an empty area on the taskbar and select Task Manager from the menu that appears. The Task Manager may be opened with a basic view; in this case, click theMore detailsbutton to see the full Task Manager. Step 3: To switch to the Startuptab, choose it from the Startup drop-down menu. Step 4:From this point on, right-click on the program item that you wish to prevent from launching with Windows 10 and select Disable from the context menu to remove it from the Windows 10 starting folder.
Method number two of four
Disable startup programs via the Settings app
The Settings application now has the ability to manage startup items. 1st step: Navigate to the Settings appAppsStartup section. Step 2:Move the slider to the off position to turn off any applications that you do not wish to be loaded with Windows 10. Method number three of four
Delete startup programs from Startup folder
As previously stated, the majority of the shortcuts to apps that are launched by Windows 10 are kept in a folder named Startup. Delete a software shortcut from this folder if you want to prevent the program from launching when Windows 10 is launched. Here’s how to go about it. Please keep in mind that you may not be able to locate all of the apps that start Windows within the Startup folder. If you are unable to locate the application shortcut that you are searching for, please refer to the directions in the alternative approaches section.
In the box, type shell:startup, and then click the Enter key to bring up the Startup folder.
Method number four of four
Remove startup programs using CCleaner
Numerous popular Windows optimization apps, such as CCleaner and Glary Utilities, include the option of removing programs from the Windows launch menu. In this post, we’ll show you how to uninstall startup applications using the widely used CCleaner tool (free). The first step is to download and install CCleaner if it hasn’t previously been done so. Step 2: Launch CCleaner and choose Tools > Startup from the drop-down menu. Third, navigate to Windowstab, pick the item for the application that you wish to disable from starting automatically, and then click theDisablebutton.
You might also be interested in the instruction on how to add programs installed from the Store to the Windows 10 launch menu.
10 Startup Programs You Can Safely Disable to Speed Up Windows
A sluggish computer bootup is perhaps the most frustrating problem that Windows users have to deal with. There might be a variety of reasons for a computer to take a long time to boot up; one of these causes is that there are too many apps and services running once Windows 10 has loaded. Let’s take a deeper look at some of the most frequent starting apps that cause Windows 10 to boot slowly, as well as how you may securely stop these programs.
Also covered will be how to control starting programs and how to identify which applications should and should not be allowed to start automatically.
Why Should You Disable Startup Programs?
If your computer is taking a long time to boot up, it is most likely because there are too many programs and services trying to start up at the same time. What happens is that you haven’t added any apps to your startup, so how do they get there? A lot of the time, apps will automatically include themselves in the startup list. That’s why it’s a good idea to pay close attention while installing software and to eliminate bloatware on a periodic basis. Not all applications which start up with the operating system are harmful, as this article demonstrates.
Commonly Found Startup Programs and Services
If you have an Apple device (iPod, iPhone, or other similar device), this procedure will automatically start iTunes when the device is connected to the computer. If you do not have an Apple device, this process will not activate iTunes. It is a needless operation because you can manually start iTunes whenever you want, and it is especially useless if you do not own an Apple device.
QuickTime is a multimedia player that allows you to play and open a variety of media files. When viewing web content, particularly movies, the application is frequently necessary. But why does it need to “launch” in the first place? The short answer is no, it does not.
Zoom is a favorite among all of us. When you can manually activate it whenever you need to attend meetings, there is no reason for it to be a starter program. It is also worth noting that removing it at startup has no effect on Zoom’s updates.
Adobe Viewer is perhaps the most well-known PDF reader on your computer, and you definitely have it installed. Adobe Reader is still the application of choice for many people, despite the fact that you don’t need it (and there are excellent alternative PDF readers). The reasoning behind why it “needs” to start automatically is beyond me. Uncheck.
The fact that Skype is an amazing video chat application is without dispute; no one can deny it. But, do you require it to start up and sign you in as soon as you log into your Windows computer? Most likely not.
6. Google Chrome
Did you know that in order for Google Chrome to be up to date and current, you do not need to start it or any of its other services? All it does at startup is use system resources that could otherwise be used by Windows to boot up more quickly.
7. Spotify Web Helper
Spotify is a fantastic tool for discovering new music, and with the new Spotify online player, you don’t even need to have the app loaded on your computer. However, if you do have it installed, you may notice that this little program appears in your starting folder. All it does is enable communication between the Spotify desktop program and your web browser. Whenever a link to a Spotify song is clicked on the internet, it instantly launches the desktop program. Is that feature worth the extra time it takes to load up your computer?
8. CyberLink YouCam
If you have a webcam, you are most likely using CyberLink’s YouCam software as your video-conferencing software.
As a result, “they” (the makers) believe it should immediately begin operating. So, what exactly does it do when it first begins to operate? Nothing, with the exception of adding superfluous processes. Uncheck.
9. Evernote Clipper
We are major supporters of Evernote, and the Web Clipper feature is particularly useful. Having said that, it has always been a mystery as to why it is included in the starting process. You may simply turn it off and continue to use the Web Clipper on a daily, if not hourly, basis without encountering any problems with it not clipping correctly in the future.
10. Microsoft Office
Microsoft Office is the most well-known and widely used office suite on the market. But what good does it do you when you’re just getting started? Is it still possible to open files if you turn off the feature? Yes. Is it possible to start any of the apps from the command line? Yes. What features are you unable to use because of your current situation? No. Allowing it to start up is a waste of time and resources on your computer. Keep in mind that this applies to any alternative office suites as well as traditional office spaces.
Managing Your Startup Programs and Services
System Configuration is a fantastic local tool for managing startup programs and services, and it is available for free. MSConfig may be accessed by entering MSConfig into the Start Menu search field and choosing the Best match option that appears. As an alternative, hit the Windows Key + R keys together to open the Run dialog box, then type msconfig and click Enter. The Startup tab in the System Configuration will no longer have a list of startup software, which will be of particular interest to Windows users.
The Startup tab allows you to sort the items by name, publisher, state (enabled or disabled), and startup impact once you have selected them (high, medium, low).
This is because halting them in theTask Manager just prevents them from starting up at that point in time, and they will start up again when the system reboots.
To Keep or Not to Keep
This list is restricted to the most common apps and services that should be removed from your computer if they are currently installed on it. Depending on the programs you have, you may have more or less than this. Examples include Steam, the popular gaming software, which may run flawlessly without the requirement to be included in the system startup routine. With addition, there is a lot of bloatware that you may uninstall in Windows 10.
Suggestions For What You Should Allow to Start-Up
The difficult part is selecting which programs and services, other than those specified in this article, should be enabled or deactivated when the computer first starts up. The following are some general guidelines:
- Anything linked with your antivirus (e.g., Avast, Avira, and so on) should be left alone. Services and programs like audio, wifi, and touchpads (for laptops) should not be turned off or restricted
- When deactivating Microsoft services, proceed with caution and complete understanding of what you’re doing. In general, applications and services for Intel and AMD should continue to be available. Cloud synchronization tools such as Dropbox, SugarSync, Google Drive, and so on, should be launched
- Basically, whatever you want to perform automatically and without your intervention (think: “set and forget”)
Are you interested in learning about more programs that you should allow to start up in addition to the ones listed above?
Keep in mind that you want to have as little as possible running when your computer first starts up, but you also want to take use of your computer’s capacity to automatically open certain applications without the need to do so manually.
Websites to Help Evaluate a Program
Because technology is always evolving, it is impossible to rely on a single article to establish what all of the non-essential startup things are. Even with clear criteria in place, a service or program may be unrecognizable or imprecise in its description notwithstanding the requirements. For those, you’ll need to resort to websites that have a database of software and services that describe what they are, who manufactures them, and whether or not they’re required for your computer to function properly to find out.
- Would you like to block it?
- Glarysoft Startup Applications
- Pacman’s Portal Windows Startup Programs Database
- PC Pitstop Process Library
- And more topics.
Speed Up Your PC By Disabling Startup Programs
In order to comprehend the risks associated with removing services and applications from the starting menu, consider the following: Many others are required, despite the fact that many others are not. If you accidentally delete anything that is crucial to your computer’s startup, there may be unintended repercussions. We cannot emphasize enough how critical it is to understand exactly what to expect when ending each service and program from the point of inception. These applications cause your Windows 10 boot time to lag.
- It’s possible that sluggish programs starting on startup are to blame.
- Continue ReadingAbout the AuthorAaron Couch (162 Articles Published) Aaron is a recent graduate of the Vet Assistant program, with a particular interest in wildlife and technology.
- When he isn’t writing or reading about the latest technical developments on the internet, he may be found blasting down a slope on his bicycle.
- Aaron Couch has more to say.
Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.
How to Disable Startup Programs in Windows 10 (Full Tutorial)
If you’re looking to perform some spring cleaning on your computer, or if you’ve found that a certain software is consuming a lot of resources, here’s the quickest and most straightforward method for disabling starting apps in Windows 10. Having some programs run on startup not only slows down the starting speed of your computer, but it can also slow down the overall functioning performance of your computer by consuming additional memory and valuable CPU resources. As a result, cleaning out your starting applications will go a lot further than most people realize in terms of improving the overall performance of your system.
Following that, we’ll go through some key values in your Registry Editor, which will be a bit more challenging procedure because we’ll be looking at a lot of them.
How to disable specific startup programs
To access the task manager, right-click on the Start Menu Button and then select ‘Task Manager’ from the drop-down menu. If you are still unsure about how to accomplish this, please see my other article on how to open it for more information. By selecting ‘More information’ from the drop-down menu, the interface will be expanded.
This will expose all of the sections of the Task Manager that you will need to browse through in order to use the whole feature set available. This is useful for a variety of additional functions in addition to the disabling of starting apps.
2. Click on the startup tab
By selecting the starting tab in the Task Manager, you will be able to access the majority of the apps that start automatically. In addition to the name of the application and several other relevant fields, you will find a column for the date. One of these columns is labeled ‘Status.’ When you look at the value for each item under the Status column, you can see whether or not the program is enabled or disabled when the application first starts. Then there’s the ‘Startup effect’ column, which is another essential one.
After that, start with the components that have a high influence on startup.
3. Right-click on the program to disable on startup
By selecting ‘Deactivate’ from the contextual menu that appears when you right-click on the application you desire to disable, you will be able to turn it off. Alternatively, if you wish to reactivate the software, repeat the procedure but this time pick ‘Enable’ from the contextual menu. The second alternative is to completely remove the software. To learn more about the individual application, choose it from your menu and then select the ‘Details’ tab in the properties window from whence it was selected (or created).
How to remove programs on startup with the Registry Editor
I strongly advise you to make a restore point before doing anything with your registry. I hope this helps. The ability to revert to a prior Windows state will come in handy if something goes wrong with your installation.
1. Open the registry
The Registry Editor may be accessed by left-clicking on the Start Menu Button and then putting in the words “registry editor.” Then, among the search results for ‘Registry Editor,’ you may choose it with the left-click button on your keyboard. If you are still unsure about how to use the Registry Editor, please see my previous post on how to use the Registry Editor for more information. It will provide step-by-step instructions with illustrations on how to open it.
When Windows starts up, there are a few places where registry settings may be found that allow certain apps to be launched. Take a moment to go through each of the run keys, looking for each value associated with the applications you don’t want and deleting them. The main tree of keys will appear if you only see ‘Computer’ in the left-hand column of keys. If you only see ‘Computer’ listed in the left-hand column of keys, left-click on the little arrow to the left of ‘Computer’ to drop open the main tree of keys.
- Check to see that the little arrow on each of the keys we’ve mentioned is pointing downwards rather than toward the key itself.
- If you have picked it correctly, it should be marked in yellow.
- The second key is HKEY LOCAL MACHINE –SOFTWARE –Microsoft –CurrentVersion –RunOnce.
- Perform the same technique as described with the last key in order to eliminate anything that you don’t want to see when the computer starts up.
- HKEY CURRENT USER –Software –Microsoft –Windows –CurrentVersion –Run (HKEY CURRENT USER –Software, Microsoft, Windows, CurrentVersion, Run) Delete any unneeded starting values for applications by using the same procedure.
- By eliminating the matching value, you may proceed to uninstall any undesirable startup apps that have been installed.
I’ve discovered on several times that not all of the items in the Task Manager’s launch settings are available. As a result, the only way to be comprehensive is to go through and remove all of the registry settings.
By combining these two ways, you will be able to entirely deactivate everything that you don’t want to execute at boot time. It’s possible that two more things will continue to function, but they aren’t programs. Tasks and other services would be an example of this. Once you’ve cleaned out your startup things, you’ll be able to enjoy a computer that runs more effectively and has more RAM available. Congratulations for devoting the necessary time to reducing the startup time and increasing the efficiency of your machine.
How to make Windows start up faster
The more you use your Windows 10 PC, the more likely it is that you’ll accumulate a collection of third-party applications and software. But many of them will automatically launch each and every time your computer is powered on by default. While it can be helpful in certain circumstances – it’s nice not to have to remember to open cloud storage services – it is not always required in others. For example, many people do not need cloud storage. That’s especially true when you consider that include the startup list increases the amount of time that elapses between you pushing the power button and your computer being fully operational.
The same result may also be achieved with the use of a software such as CCleaner.
How to startup apps in Windows 10
In Task Manager, you have the option of changing the launch applications. To start it, hold down the keys Ctrl, Shift, and Esc at the same time. Alternatively, right-click on the taskbar at the bottom of the screen and select Task Manager from the drop-down menu that displays. Another option in Windows 10 is to right-click the Start Menu icon and select Task Manager from the context menu. It is set to default to the applications that are now executing on your system when the utility is initially started up, which is convenient.
- Please click on this.
- To access the startup items, select the Start-up tab from the menu bar at the top of the screen.
- It’s critical to pay attention to the Status column since not everything on the list is truly enabled.
- Simply clicking on the Status column will arrange the items into groups of enabled and disabled apps, which will make things easier to understand.
How to remove startup programs using Task Manager
If you see any applications that you do not want to be included in your starting sequence, it is extremely simple to eliminate them. Remove an application from your computer by simply right-clicking on it and selecting Disable from the resulting pop-up menu. When you turn on your computer, the software will still be listed on the start-up screen, but it will no longer open automatically.
To re-enable it, simply right click on it and pick Enable from the context menu. Always remember to restart your computer after making any changes to ensure that they are effective! If you enjoy fiddling with things, this guide will teach you how to alter the default font on Windows 10.
Author: Martyn Casserly, Contributor
Ever since the debut of his ZX Spectrum computer in the early 1980s, Martyn has been fascinated by technology and the possibilities it offers. He writes tutorials, buying tips, and reviews for iOS, Android, Windows, and macOS, among other platforms.
How to remove Startup Programs in Windows 10 [Full Guide]
- If starting your operating system appears to take an eternity, you may want to take action. Begin by organizing your startup applications so that you only keep those that you require. Listed below are instructions on how to rapidly remove apps from the Startup
- Check out our Windows 10 Guides for more useful tips and tricks. If you want to learn more about technology, don’t be afraid to check out theTutorials Hub.
INSTALL X BY CLICKING ON THE DOWNLOAD BUTTON FILEDoes your operating system take a long time to load when you first boot it up? It’s possible that the boot process takes a long time since there are several apps that need to be loaded at launch. There are a variety of solutions available for managing startup applications. It may be accomplished with the use of theStartup Manager, Task Manager, Explorer, or the Registry editing tool. You may discover a few strategies that will walk you through the process of adding or uninstalling starting applications in the section below.
Windows 10 Guide to remove Startup Programs
- By clicking on the download link, you will be able to install X. FILEDoes your operating system take a long time to load when you first boot up? Because there are several apps that load at beginning, it’s possible that the boot process is prolonged. It is possible to manage starting applications using a variety of techniques. Start up Manager, Task Manager, Explorer, and the Registry Editor are all options for doing this task. You’ll find a few options listed below that will walk you through the process of adding or uninstalling startup applications from your computer. Learn how to activate and disable different applications as well as how to manage your devices.
1. Use the File Explorer
- Enter the following command after pressing the Win + R key combination: To start the shell, type shell:startup and hit the Enter key. It is important to note that if you wish to add or delete startup programs for all users, you must use the command below: shell: Communal Initialization
- A Startupwindow will be shown. Locate the executable file for the application that needs to be loaded when Windows starts up. Make a shortcut to this application. Copy it and paste it into the Startupwindow of your computer. Addition of a starting program in Windows 10 may be accomplished in the following manner: Remove the shortcut from the Startupfolder in order to uninstall the application.
2. Use the registry
- Press the Win + R key combination to start the game. Type the following command onto your computer: regedit without the quotation marks and pressing the Enterkey
- Navigate to the following route or press the following key to register: HKEY CURRENT USERSoftwareMicrosoftWindowsCurrentVersionRun
- If you look in the name column, you will discover the application that is launched automatically when Windows begins
- Delete the program from the Startup list by doing the following:
- Choose Deletefeature from the context menu when you right-click on the application’s name.
- Right-click in the Registry Editorwindow and pick the New -String valuefeature option from the context menu. Value name (the name of the application) should be included. Adding more value data: input the whole path to the executable (*.exe) of the application that you want to execute at startup
Are you trying to locate the Windows 10 Startup Folder? Take a look at this fantastic guide that will direct you to the location in no time at all.
3. Use the Group Policy Editor
In search of the Windows 10 Startup Folder? Look no further. Please have a look at this fantastic guide that will direct you to the correct area in no time!
- Press the Windows Key + the Rand key combination. entergpedit.msc. To enter, press Enter or click OK. When the Group Policy Editor appears, browse toUser ConfigurationWindows SettingsScripts (Logon/Logoff) in the left pane of the window. After that, double-click onLogon in the right-hand pane, and the Logon Propertieswindow will display. Activate the Add a script button
- When the Add a script window appears, activate the Browsebutton. Start by selecting the program that you wish to use. After that, click on OK
- After that, click on ApplyandOK to preserve your modifications. After you’ve saved your modifications, restart your computer and see if the program launches automatically with Windows.
This is a straightforward solution, but in order to make advantage of it, you must have the Windows Pro or Enterprise editions installed. A alternative solution will need to be found if you are an individual user.
4. Use the Task Scheduler
Task Scheduler is a valuable application that comes pre-installed in Windows. It is possible to use this program to schedule particular apps to begin running at a specified time, but it is also possible to add applications to the startup list. Expert Recommendation: Some PC problems are difficult to resolve, particularly when it comes to damaged repositories or missing Windows components. If you’re having problems correcting an issue, it’s possible that your system is partially broken. Installing Restoro, a program that will scan your system and discover the source of the problem, is highly recommended.
Following these instructions will allow you to construct startup apps using the tool, which is quite straightforward to use.
- Press the Windows Key + the Rand key combination. entertaskschd.msc. To enter, press Enter or click OK. When the Task Scheduler starts, in the right pane, click on the button labeled Create Task. The Create Taskwindow will be shown. Enter the name of your job and choose the option to “Run with highest privileges.” Choose Windows 10 from the Configure drop-down menu. Navigate to theTriggerstab and click on theNewbutton to begin. When the New Triggerwindow appears, change the task’s Begin time to “At log on.” If you choose, you may configure this job to execute exclusively for a certain user or for all users on the computer if you so desire. You can also postpone and redo the task if it is necessary. After you have made your selections, click on OK. Navigate to theActionstab and choose the New option. Click on theBrowsebutton after setting theAction to start a program. Select the chosen application and press the OK button. To save your work, click OK once again.
The requested program will now be launched automatically every time Windows is launched using this procedure. Task Scheduler is a sophisticated application that allows you to customize your tasks in any manner you see fit, and it is completely free. This strategy is ideal for sophisticated users who want complete control over the activities they do and the programs that they start up. It should be possible to add programs to the startup list even if you are a novice user by utilizing this method.
5. Use dedicated tools to manage Startup programs
If the preceding solutions appear to be too difficult for you, you may want something that is more user-friendly in nature. We recently reviewed the best applications for managing starting items, and while the majority of these apps enable you to stop or delete startup items, some of them also offer the option to add new apps to the startup list, which is very useful.
If you’re seeking for a user-friendly approach to add startup things to your computer, we strongly recommend that you have a look at some of these tools, which are most of them free and reasonably simple to use.
6. Check programs’ configuration
The quickest and most straightforward method of adding a program to the startup list (or removing applications from the starting list) is to examine its configuration. Most apps can be configured to start automatically with Windows, and you only need to look at their options to find out how to do so. Now all you have to do is look for the option to “start with Windows” or something similar and choose it. Following that, the program will be launched automatically as soon as Windows is booted up.
Keep in mind that certain programs do not even offer the starting option, which means that this solution will not work for those applications.
How do you deal with applications that start up automatically?
Frequently Asked Questions
- What is the best way to have software start automatically when I boot up my computer? You may simply do this during the installation process (or later on by checking the app’s settings). In most applications, you may choose to have them activate automatically whenever you start a new Windows session. How can I find out which programs are running during startup? The quickest and most straightforward method is to search in the Task Manager. Once the program has been launched, you can simply navigate to theStartup page, where you will see a list of all the applications that are presently scheduled to load at starting
- How can I prevent services from loading at startup? There are a variety of methods for removing applications from the launch menu, and we discussed a number of them in this post (File Explorer, Task Manager, Group Policy Editor, Registry, System Configuration, CMD, and so on). There are additional specialist tools available for you to employ on the job