How To Disable Trackpad On Windows 10

Contents

Disable the Touchpad on Windows 10 When You Don’t Need It

  • Look for a key that has an icon that resembles a touchpad on it. To enable or disable touchpad capability, just tap it or pick theWindowsiconSettingsgearDevicesTouchpad option from the menu bar. To change the sensitivity of the touchpad, selectTouchpad sensitivity
  • To reset the touchpad, go to the WindowsiconSettingsgearDevicesTouchpad menu. Restore the default touchpad settings and motions on your computer. Reset

Find a key with a symbol that resembles a touchpad and press that key to activate it. The touchpad capability may be enabled or disabled by tapping it, or by selecting theWindowsiconSettingsgearDevicesTouchpad. ChooseTouchpad sensitivity from the drop-down menu. Pick WindowsiconSettingsgearDevicesTouchpad from the drop-down menu to reset the touchpad. Restore the default touchpad configurations and motions. Reset;

Why Disable the Touchpad in Windows 10?

Some people choose to use a mouse rather than a keyboard since it is often more comfortable. Others who have touchscreen-enabled PCs may want to tap and swipe their laptop screens in the same way they would on a tablet computer. It is possible that you will wish to temporarily deactivate the touchpad while working on a document in order to avoid accidently pressing anything or moving the mouse cursor while typing on a computer keyboard. Because of its close proximity to the keyboard, a touchpad is more susceptible to these types of mishaps.

Depending on the device, you may or may not be able to switch it back on by pressing a manual key on the keyboard.

How to Disable the Touchpad on Windows 10

Check to determine whether your laptop has a physical key that can be used to disable or enable the functioning of the touchpad. It’s possible that the key will have an icon that looks like a touchpad. It’s probable that you’ll have to hold down the Fnkey while pressing it. If your device does not have such a key, you may deactivate the touchpad by going into your Windows Settings and following the steps below:

  1. Click on theWindowsicon in the lower-left corner of your screen, and then click on thegearicon to bring up the WindowsSettings dialog window. If you prefer, you may typesettings into the Windows search box and then selectSettings from the drop-down menu that appears. SelectDevices
  2. To turn off the touchpad, selectTouchpadin the left pane and then toggleTouchpadoff. Uncheck the box labeled “Leave touchpad on while a mouse is attached” if you want the touchpad to automatically switch off when you plug in your mouse. If you wish to adjust the sensitivity of the touchpad, scroll down to Touchpad Sensitivity and make your selection. Also customizable are the actions that take place when you tap the touchpad and when you scroll and zoom. Continue reading to learn how to modify Three-Finger Gestures and Four-Finger Gestures in more detail. To restore the touchpad’s default settings, scroll to the bottom of the screen and selectReset.

Thank you for informing us about this!

6 Ways to Disable the Touchpad in Windows 10

When purchasing a new laptop, we place a great importance on a touchpad that is both elegant and smooth. However, there may be situations when you want to completely get rid of the item in question. It is possible that the touchpad is detecting inadvertent clicks while you type on the keyboard, that you want to utilize an external device, or that there is another cause. It is not physically feasible to separate it from the laptop, however it may be turned off via the laptop’s settings. Let’s take a look at six alternative methods for turning off the touchpad on your laptop.

1. Disabling the Touchpad in Windows Settings

If you want to make any changes to your Windows settings, the first place you should go is in the Settings app. So let’s have a look at how to deactivate the touchpad in Windows settings first, before moving on to more advanced techniques of removing the touchpad in the future. Right-click on the WindowsStartbutton and selectSettings from the context menu. Go to Devices and then to Touchpad from the left-sidebar menu to complete the process. To turn off the touchpad, toggle theTouchpadtoggle to the off position.

2. Disabling the Touchpad in the Control Panel

Instead, you may deactivate the touchpad in the Windows Control Panel, which is an option.

If you decide to go down this road, you have three alternatives to consider:

1. Disabling Touchpad Completely

In the Windows Control Panel, go to theMousecategory and disable the mouse. Select the touchpad tab under Mouse Properties, which in this example is ELAN, and then click the OK button. To turn off the ELAN Touchpad, press the Stop Device button. The touchpad will be disabled if you select Yes in the Disable Device warning popup window. To avoid getting stuck after deactivating your touchpad, keep an external mouse close by. It is the only method to get your touchpad back to operate once it has been disabled.

2. Disabling Touchpad When You Connect an External Device

Alternatively, you may tick the box labeled “Disable when external USB pointing device is plugged in,” which will disable the touchpad pad as soon as an external pointing device is connected to the computer. Following the removal of the external device, the touchpad will begin to function normally.

3. Disabling Touchpad Clicks While Keeping Its Scroll Functionality

Finally, but certainly not least, if you want to deactivate clicks on the touchpad while keeping the scrolling on the touchpad and the button on the touchpad operational, there is another solution. Again, go to Control Panel and choose theTouchpadcategory from the drop-down menu. Navigate to theTappingconfiguration section of the One-fingersettings. When the Enable checkbox is unchecked, the touchpad will no longer respond to clicks, but the rest of its functionality will continue to operate.

If none of these techniques work for you, you may try one of the various methods of deactivating the touchpad in Windows that are available.

3. Disabling the Touchpad in Device Manager

If none of the above mentioned ways work for you, the Device Manager should be your next port of call for disabling the touchpad. The way it works is as follows:

  1. Left-click on the Startbutton and selectDevice Manager from the drop-down menu. Increase the number of categories for mice and other pointing devices. Disable your touchpad driver by selecting it from the context menu of the right-click menu.

You may have to disable each driver one at a time if you discover that both your external pointing device and touchpad have the same driver name. This will allow you to determine which driver represents your touchpad. However, this solution may be inapplicable in other cases, such as when Windows does not enable deactivating the primary touchpad device through the driver’s interface.

4. Disabling the Touchpad via ETD Control Centre

It is also known as Elan Trackpad Device Control Centre, and it is an application that runs in the background of your device and controls the activity of your trackpad. When you exit this software, your trackpad will be disabled. If you have this software installed on your device, the instructions below will guide you through the process of uninstalling it:

  1. Right-click on the taskbar and select Task Manager from the drop-down menu. The ETD Control Centre should be found in the list of programs. By left-clicking on the task, you may end it or disable it.

To make the modifications take effect, restart your computer once. Once it has been deactivated, it will not run on bootup, which will prevent your touchpad from operating. However, if your computer is equipped with its own touchpad driver, removing ETD Control Centre will have no effect on your machine. Additionally, ETD Control Centre is not available on all computers, so if you do not have this software managing your touchpad activity, this workaround will not be effective for you.

5. Disabling the Touchpad via the Windows Registry

If nothing appears to work, try editing the registry to deactivate the touchpad. However, only attempt this if you are confident in your abilities. If you are unfamiliar with such alterations, it is still a good idea to create a backup of the registry.

As a consequence, even if your knowledge fails you and you make a mistake, you will be able to repair the damage. The following is the procedure to follow in order to disable the touchpad using the Registry:

  1. To launch the Run command box, press the Windows key + R together
  2. Type “Regedit” and hit the Enter key
  3. Allow access to the user control panel by selecting Yes. Using the following route, navigate to thePrecisionTouchPadstatus folder on your computer. (Alternatively, you may copy and paste it into the Registry.) ComputerHKEY CURRENT USERSOFTWAREMicrosoftWindowsCurrentVersionPrecisionTouchPadStatus
  4. To make changes to the Value data, double-tap onEnabledentry. Set the value of data to 0 instead of 1.

Therefore, the touchpad will not function unless the data value is changed back to 1. You may want to explore utilizing third-party software if you are still unable to deactivate the touchpad after completing these instructions.

6. Use Third-Party Software

If everything else fails, you may turn to third-party applications for assistance. Touchpad Blocker is a fantastic free program that allows you to enable or disable the touchpad by pressing a series of keys. By default, they are configured to the keyboard shortcuts CTRL + ALT + F9. By hitting CTRL + F9 on your keyboard, you may toggle the blocker on and off (no ALT). To learn more about how to use this program, go to the Touchpad Blocker official page. Install the Touchpad Blocker program when it has been downloaded.

Later on, you may access the touchpad blocker from the taskbar or from the list of hidden icons, depending on your preference.

Furthermore, it allows you to prevent accidental taps and clicks as well as establish time intervals to prevent clicks from occurring.

Deactivate Your Touchpad and Get Back to Work

Some of the adjustments may be effective for you, while others may not be effective. No matter what happens, the last option will always work in any situation if none of the previous alternatives have been successful. Touchpad Blocker is compatible with all versions of Windows, including Windows XP, Vista, 7, 8, and 10. It is also compatible with Mac OS X. The touchpad may not function properly once it has been restored; you should update the driver, unhook any external pointing devices, and reset any additional mouse settings if necessary.

  • Here’s how to fix it.
  • You can quickly restore mouse functionality by following these touchpad troubleshooting recommendations.
  • Shan Abdul is a young man who lives in the United States (116 Articles Published) Shan Abdul has a bachelor’s degree in engineering.
  • He writes on the use of various tools and technologies to assist individuals in becoming more productive, whether they are students or working professionals.
  • Shan Abdul has more to say.
You might be interested:  How To Refresh Windows 10

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

Disabling touchpad when mouse is connected on Windows 10

Touchpads in Windows 10 not only provide a method for navigating the user interface, but they have also evolved over time, and you can now utilize gestures to complete navigation tasks even more quickly than you could previously. Despite all of the improvements, many people still prefer the classic mouse, despite the advances in technology. However, if you want to use a mouse instead of the touchpad, it is easy to arrange Windows 10 to disable the touchpad automatically only when a USB or Bluetooth mouse is attached to the computer.

The instructions in this Windows 10 article will lead you through the simple process of disabling your laptop’s touchpad when you connect a mouse, which can be done using the Settings app and Control Panel.

  • How to deactivate the touchpad when a mouse is attached by utilizing the Settings menu item
  • How to use the Control Panel to deactivate the touchpad when a mouse is attached

How to disable touchpad when mouse is connected using Settings

  1. OpenSettings
  2. Select Devices
  3. Select Touchpad
  4. Then close Settings. Remove the check mark from the option “Leave touchpad active when a mouse is attached” under “Touchpad.”

Once you have completed the procedures, the touchpad will stay disabled until you remove your mouse from the computer.

How to disable touchpad when mouse is connected using Control Panel

However, it should be noted that this feature is only available on smartphones with a precision touchpad, as indicated in the Settings app. Even if you have a different sort of touchpad, it is possible to customize your mouse settings using Control Panel or a third-party program – which is often given by your device’s manufacturer. For example, if you’re using a Synaptics touchpad, you may adjust the mouse settings in Control Panel by following the procedures outlined below:

  1. Control Panel should be opened. Select Hardware and Sound from the drop-down menu. Click on the mouse icon under “Devices and Printers.” Remove the check mark from the Disable internal pointing device when an external USB pointing device is attached option on the “Device Settings” tab.

In addition, keep in mind that, depending on the manufacturer, the option to turn off the touchpad while a mouse is connected may be tucked away in the support documentation. The ability to deactivate the touchpad, for example, may be found in Dell’s support software on some of the company’s notebook computers.

  1. Open the touchpad application on your computer. Choose the mouse that you’re currently using
  2. Check theDisable Touchpad when USB Mouse is present option
  3. If it is there, disable the touchpad.

More Windows 10 resources

More useful information, coverage, and answers to frequently asked concerns regarding Windows 10 may be found at the following websites and resources:

  • Everything you need to know about Windows 10 on Windows Central
  • Help, hints, and tips for using Windows 10
  • Windows 10 discussion boards are available on Windows Central.

After Windows 10 update, can no longer disable touchpad. Please help

Hello there, Feisty. Thank you for taking the time to post in the Microsoft Community; we appreciate your enthusiasm for Windows 10. I understand your worry regarding the touchpad becoming inoperable after the Windows Update; please provide us with the following information so that we may better assist you:

  1. Is it the November Update that you’re referring to? Tell me about your device’s make and model number. Do you have any questions or concerns about the functionality of the Touchpad? What part of the website were you attempting to find the deactivate option?

The faulty or out-of-date touchpad drivers that were installed after the upgrade may have caused this problem. If you are unable to reach the touchpad, I recommend that you connect an external mouse and attempt the steps listed below. The first step is to create a plan. The actions outlined below will assist you in searching for the disable option and attempting to turn it off.

  1. The corrupted or out-of-date touchpad drivers that appeared after the upgrade may have caused this problem. When using a touchpad, I recommend connecting an external mouse and attempting the steps listed below. The first step is to identify your target audience. The procedures outlined below will assist you in locating the disable option and attempting to turn it off.

Step 2: Install the most recent Touchpad drivers.

  1. When you are at the desktop, press the Windows key plus the X key. ExpandMice and other pointing devices by selectingDevice Manager from the drop-down menu. Right-click on each of the drivers and select “Update driver software” from the context menu.

Also, try searching for the drivers on the manufacturer’s website and attempting to install the drivers from that page. I hope that is of assistance. Please respond to this post with an updated status of this issue in order to receive more support. 3 people found this response to be helpful. Was this response of assistance? Sorry if this wasn’t of assistance. Great!

Thank you for taking the time to provide comments. What level of satisfaction do you have with this response? Thank you for your feedback; it allows us to make improvements to the site. What level of satisfaction do you have with this response? Thank you for taking the time to provide comments.

My reference is to the November update, which I was unable to complete since I was out of the country at the time of the publication. According to my knowledge, there is no issue with the touchpad’s operation at this time. I’m unable to disable the touchpad, which is something I need to do. I just want to use my external mouse in this situation. I went into the Device Settings and Mouse Properties, but there is no way to disable the feature. Furthermore, the Fn+F9 keys, which are normally used to activate this feature, are no longer functional.

  • They have the most recent information.
  • I previously have a copy of Windows 10 that was functional.
  • I’m using an ASUS Convertible laptop (model Q551L9), and 9 people found this response to be useful.
  • Sorry if this wasn’t of assistance.
  • Thank you for taking the time to provide comments.
  • Thank you for your feedback; it allows us to make improvements to the site.
  • Thank you for taking the time to provide comments.

I was able to find a solution online.

During this procedure, the driver is re-installed.

The toggle keys on the keyboard are now fully functional.

The following response was useful to 18 people: Was this response of assistance?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

HiFeisty, Thank you for getting back to us and informing us of the current status of this issue.

We are relieved to learn that the situation has been resolved.

Please do not hesitate to contact us if you require any additional assistance with the Windows Operating System.

Thank you very much.

Was this response of assistance?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

How to disable or enable the touchpad on a laptop

Computer Hope’s most recent update was made on November 10, 2021. On a laptop, the touchpad is a practical method to add the functionality of a mouse without the need for an additional peripheral device. Once activated or unlocked, the touchpad performs the same functions as an external mouse, with the exception of scrolling. Using the touchpad when it is disabled or locked prevents the touchpad from functioning, preventing the mouse cursor from accidentally moving with your palm while you are typing.

According on the laptop manufacturer, the specific methods to activate or disable the touchpad may change somewhat, therefore you may need to rely on your intuition in order to accomplish your desired result.

Steps to try first

On certain computers, a button at the top of the touchpad allows you to rapidly enable and disable the touchpad, which is useful for when you’re traveling. Using this button, you may toggle the touchpad on and off as needed. Keyboard shortcuts for the touchpad: Some laptops contain aFnkey that, when used in conjunction with one of theF1-F12function keys, allows you to activate and disable the touchpad. Toggling the touchpad on and off is accomplished by pressing both of these shortcut keys at the same time.

It may also include a pointing finger or a circle that is close to or over a rectangular shape.

How to disable the touchpad in Windows 8 and 10

  1. Click the Windows key, then typetouchpad on the touchpad and press Enter. You may also enter Settings by pressing the Windows key + I key combination and selectingDevices, thenTouchpad. The Touchpad Settingswindow will appear
  2. In this window, toggle theTouchpadtoggle switch to theOffposition.

Using a keyboard only

  1. Click the Windows key, then typetouchpad on the touchpad and press Enter. Alternative: To access Settings, click the Windows key + I key combination and then use theTab, arrow keys, and Enter key to selectDevices, then Touchpad. Continue pressingTab until theTouchpad toggle switch is selected in theTouchpad settings panel
  2. To shift the toggle switch to the Off position, press the spacebar once.

How to disable the touchpad in Windows 7 and earlier

  1. Select Control Panel from the Start menu by pressing theWindows key and the Enter key
  2. Hardware and Sound should be selected. SelectMouse from the list of devices and printers. Select the tab labeledTouchPad,ClickPad,Device Settings, or something similar in theMouse Propertieswindow
  3. Then click OK. There should be a toggle switch for turning on and off the TouchPad. It might be in the form of a button or a checkbox. Select theDisable option and press the OK button.

Note If there are many devices listed in theDevice Settingstab, you must first pick the touchpad from the device list and then click theDisablebutton to make it inoperable again.

Using a keyboard only

  1. Select Control Panel from the Start menu by pressing theWindows key followed by the Enter key. Access Hardware and Sound from your keyboard by using the Enter key
  2. Mouse is found under the Devices and Printers section
  3. Browse to it with your keyboard and pressEnter
  4. Use the keyboard shortcutCtrl + Tab to get to the TouchPad, ClickPad, Device Settings, or equivalent tab, and then pressEnter. Browse to the checkbox that allows you to use or disable the touchpad by using your keyboard to navigate. Toggling to the off position is accomplished by pressing the spacebar.

Keep pressing Tab until theSynaptics Touchpador a similar touchpad device name is highlighted if you are using theDevice Settingstab in Windows. If there are numerous touchpad devices listed, you may need to use the up or down arrows to pick the touchpad device you want from the drop-down menu. Click Tabagain until theDisablebutton is chosen, and then press Enter to complete the process.

How to disable the touchpad in macOS

You cannot disable the MacBook trackpad until an external mouse is plugged in or connected through Bluetooth on Mac OS X. As soon as you’ve got a mouse attached, follow the steps outlined below.

  1. Select System Preferences from the Apple menu in the menu bar by clicking the Appleicon in the menu bar.
  1. Scroll down until you reach the Pointer Controlpanel option. Make sure the Ignore built-in trackpad when a mouse or wireless trackpad is present option is selected.

The Pointer Controlpanel may be found by scrolling down the page; TheIgnore built-in trackpad when a mouse or wireless trackpad is present option should be selected.

How to disable the touchpad on a Chromebook

In Chromebooks, the tap-to-click capability may be turned off while still enabling you to use the touchpad to move the mouse pointer across the screen. The instructions outlined below demonstrate how to turn off tap-to-click.

  1. Click the bottom-right corner of the Chromebook screen, which is where the time and battery symbol are situated, with either the touchpad or a mouse to begin the process. To access the Chromebook settings, in the window that appears, click thegear symbol, which is normally placed towards the top-right or bottom-left area of the screen. To access the Deviceoption in the Settingswindow, select it from the left navigation menu of the window. TheTouchpadsection may be found by scrolling down. Choose off from the Enable tap-to-clickoption by clicking the toggle to the right of it.
You might be interested:  Where Is The Action Center On Windows 10

Disable all touchpad functionality

Follow the procedures outlined below to totally deactivate the touchpad on your Chromebook.

  1. Launch theChrome web browser. Fill out the address bar at the top of the browser window with the following information:chrome:/flags/ash-debug-shortcutsand hit Enter
  2. A list of Chrome OS configuration options is provided. Debugging keyboard shortcuts should be the first option on the list, and it should be marked in yellow. Then, to the right of that setting, pick Enabled from the drop-down option
  3. To restart the Chrome browser, click theRestartbutton that appears in the bottom-right corner of the window. If you want to deactivate the touchpad once the Chromebook has restarted, hit the Search key+Shift+ Pkeyboard shortcut.

Note: If you deactivate the touchpad on your Chromebook, you will need to use an external mouse to navigate on the device.

How to enable the touchpad in Windows 8 and 10

  1. Click the Windows key, then typetouchpad on the touchpad and press Enter. You may also enter Settings by pressing the Windows key + I key combination and selectingDevices, thenTouchpad. The Touchpadsettings window will open
  2. In it, turn the Touchpadtoggle switch to theOnposition by clicking it.

Using a keyboard only

  1. Click the Windows key, then typetouchpad on the touchpad and press Enter. Alternatively, hit the Windows key + It to enter Settings, and then use theTab key, arrow keys, and Enter key to selectDevices, then Touchpad
  2. Continue pressing Tab until theTouchpad toggle switch is selected in theTouchpad Settingswindow. To flip the toggle switch to the On position, press the spacebar once.

How to enable the touchpad in Windows 7 and earlier

  1. Select Control Panel from the Start menu by pressing theWindows key followed by the Enter key. Hardware and Sound should be selected. SelectMouse from the list of devices and printers. Select the tab labeledTouchPad,ClickPad,Device Settings, or something similar in theMouse Propertieswindow
  2. Then click OK. There should be a toggle switch for turning on and off the TouchPad. It might be in the form of a button or a checkbox. Select theEnable option and press the OK button.

Note It is necessary to choose the touchpad from the device list in theDevice Settingstab if there are numerous devices listed in that tab before clicking theEnable button.

Using the keyboard only

  1. Select Control Panel from the Start menu by pressing theWindows key followed by the Enter key. Access Hardware and Sound from your keyboard by using the Enter key
  2. Mouse is found under the Devices and Printers section
  3. Browse to it with your keyboard and pressEnter
  4. Move to the TouchPad, ClickPad, Device Settings, or a comparable option tab using the keyboard shortcut Ctrl + Tab
  5. Then hit Enter. Browse to the checkbox that allows you to use or disable the touchpad by using your keyboard to navigate. In order to toggle it on or off, press the spacebar.

Keep pressing Tab until theSynaptics Touchpador a similar touchpad device name is highlighted if you are using theDevice Settingstab in Windows. If there are numerous touchpad devices listed, you may need to use the up or down arrows to pick the touchpad device you want from the drop-down menu. Tab again until theEnablebutton is chosen, then pressEnter to confirm your selection.

How to enable the touchpad in macOS

Although the touchpad cannot be completely removed in Mac OS X, it may be temporarily disabled if a mouse is attached to the computer. When using a touchpad with a mouse, detach the mouse and check to see whether the touchpad is enabled and functional again. To keep the touchpad active even when a mouse is attached, complete the steps outlined in the following section:

  1. Select System Preferences from the Apple menu in the menu bar by clicking the Appleicon in the menu bar.
  1. Scroll down until you reach the Pointer Controlpanel option. Remove the check mark from the box labeled Ignore built-in trackpad when a mouse or wireless trackpad is available.

Please keep in mind that when your external mouse is unplugged or otherwise removed, the trackpad is immediately activated once again.

How to enable the touchpad on a Chromebook

If the tap-to-click capability for the Chromebook touchpad has been turned off, please follow the steps below to enable it once more.

  1. Click the time and battery symbol in the bottom-right corner of the Chromebook screen, which may be found by using a mouse. To access the Chromebook settings, in the window that appears, click thegear symbol, which is normally placed towards the top-right or bottom-left area of the screen. To access the Deviceoption in the Settingswindow, select it from the left navigation menu of the window. TheTouchpadsection may be found by scrolling down. Make a right-click and toggle the Enable tap-to-clickoption on
  2. This will turn on the tap-to-click feature.

Enable all touchpad functionality

Enabling the touchpad is accomplished by using the Search key+Shift+ Pkeyboard shortcut. If hitting the keyboard shortcut does not result in the touchpad being enabled, it is probable that the advanced keyboard shortcuts have been deactivated. Follow the actions outlined below to make those shortcuts available.

  1. Launch theChrome web browser. Fill out the address bar at the top of the browser window with the following information:chrome:/flags/ash-debug-shortcutsand hit Enter
  2. A list of Chrome OS configuration options is provided. Debugging keyboard shortcuts should be the first option on the list, and it should be marked in yellow. Make sure that Enabled is selected from the drop-down option to the right of that setting. To restart the Chromebook, click on theRestartbutton that appears in the bottom-right corner of the Chrome browser window (see Figure 1).

After the Chromebook has been restarted, try hitting the Search key+Shift+ Pkeyboard shortcut once more. If the touchpad is still not enabled and functioning, it is possible that the touchpad is faulty and must be replaced.

FIX: Can’t Disable Touchpad in Windows 10

It’s likely that you don’t want any accidental touches or pushes on the built-in touchpad to be registered if you’re using an external pointing device with your Windows 10 laptop. It may be beneficial to disable it. However, it is possible that the choices that allow you to deactivate the touchpad may either not work or will be absent. When trying to deactivate the touchpad in Windows 10, you can experiment with different settings, registry hacks, and third-party applications to resolve the problem.

Before you start, make sure everything is in order (and that you use it).

Disable Touchpad in Windows 10 via Settings App

The Settings app in Windows 10 is the easiest and most convenient way to deactivate your laptop’s touchpad. It’s likely that you’ve previously attempted to use it and failed. However, if you didn’t, follow the instructions below right away. Settings may be found by going to the Startmenu and selecting it there. SelectDevices is the second step. 3. SelectTouchpadorMousetouchpadfrom the left-hand menu. 4. 4. To deactivate the touchpad, turn off the switch located underTouchpad. To disable the touchpad when a mouse is attached, uncheck the box next to Leave touchpad on while a mouse is connected.

Disable Touchpad via Mouse Properties

The touchpad setting choices on theMouse Propertiesapplet should be used instead if the touchpad disabling options in the Windows 10Settingsapp appear to be missing or are unable to function properly. 1. Open the Startmenu and select SettingsDevices from the drop-down menu. 2. SelectTouchpadorMousetouchpadfrom the left-hand menu. 3. 3. Select Additional Settings from the drop-down menu. 4. Navigate to theDevice Settings section. On certain laptops, the tab may be branded with the model number of the device (for example,ThinkPad).

You can also choose the checkbox next toDisable internal pointing devices when an external USB pointing device is connected to configure the touchpad to deactivate automatically if a mouse is connected through USB or Bluetooth to the computer.

If you are unable to locate the option, you can make it visible again by making changes to the system registry (more on that further below).

Update the Touchpad Drivers

If you are unable to deactivate the touchpad in Windows 10 via the Settingsapp or theMouse Propertiesdialog box, you must first update the drivers for your laptop’s touchpad. To download and install these drivers, go to the manufacturer’s website (Dell, HP, Lenovo, etc.) and follow the instructions. In addition, you must upgrade Windows 10. Not only does this assist you in resolving any flaws and difficulties that may have prevented you from deactivating the touchpad, but it also allows you to install any touchpad-related driver updates that have been made available by Microsoft.

  • Open the Startmenu and selectSettingsUpdateSecurity from the drop-down menu.
  • SelectCheck for Updates to run a scan for any new software updates.
  • 3.
  • After that, you must restart your computer in order for them to take effect.
  • If you find this option, click on it to see if it contains any extra driver updates.

Disable the Touchpad by Modifying the Registry

If the choices listed above continue to fail to function or appear to be missing, you can try deactivating your laptop’s touchpad by editing the system registry. Important:Before making any changes to the system registry, we recommend that you make a backup of it. If any updates cause additional problems, you should be able to use this information to restore the register. 1. To access the Runbox, press the Windows key and R at the same time. 2. Typeregeditand then click OK. 3. 3. In the Registry Editor’s address bar, copy and paste the following path into the box: HKEY CURRENT USERSOFTWAREMicrosoftWindowsCurrentVersionPrecisionTouchPadStatus 4.

  1. 5.
  2. 6.
  3. 7.
  4. The touchpad should be turned off as a result of this.

Modify the Registry (Alternative Method)

If theMouse Propertiesdialog box does not appear to allow you to deactivate the touchpad when a mouse is attached, the following registry hack should assist you in revealing the touchpad. The following is only applicable to touchpads manufactured by Synaptics. 1. Launch the Registry Editor by double-clicking on it. 2. Copy and paste the following path into your browser and hit Enter: ComputerHKEY CURRENT USERSOFTWARESynapticsSynTPEnh3. Disable the IntPD feature by double-clicking the registry item labeledDisableIntPDFeature.

Change the value of datato33.

5. Click on the OK button. 6. Go to the Startmenu and select SettingsDevicesTouchpadAdditional settingsDevice Settings from the drop-down menu. The optionDisable internal pointing devices while an external USB pointing device is connected should now be shown on the screen.

Disable Touchpad via Device Manager

Another option for disabling the touchpad on your laptop in Windows 10 is to make use of the Device Manager applet. 1. Select Device Manager by pressing the Windows key and X together. 2. Pointing devices such as mice and other pointing devices 3. Select Disable device from the context menu of your touchpad driver. If you notice many instances of the genericHID-compliant mousedriver, you may choose to disable them one at a time until you find the entry that matches to your touchpad’s model number.

Disable Touchpad via the BIOS or UEFI

If none of the solutions listed above were successful, you might try deactivating the touchpad via the BIOS or UEFI configuration. We strongly advise you to read through our instruction on how to access and use the BIOS or UEFI before continuing. Then, to turn off the touchpad, follow the procedures outlined below. 1. Start by booting your laptop into the BIOS or UEFI configuration. 2. Locate an option such asTouchpadorInternal Pointing Device under each tab of the BIOS or UEFI configuration menu.

Select Disabled by pressing theEnterkey on your keyboard.

Save your modifications and then leave the BIOS system configuration.

Disable Touchpad UsingTouchpad Blocker

There are third-party programs available to assist you with disabling the touchpad in Windows 10. Touchpad Blocker is an excellent illustration of this. You may instantly deactivate the touchpad with a simple keyboard shortcut (defaulted to Ctrl+Alt+F9), which is provided by this free software. Touchpad Blocker is a small and lightweight application that may be accessed instantly from the system tray. It also has extra capabilities such as the ability to prevent accidental taps when typing on your laptop’s keyboard, the ability to start automatically when the system starts, and so on and so forth.

How to Turn Off Touchpad Windows 10

The touchpad is the name given to the built-in input device for the mouse pointer on a laptop computer. Touchpads are totally functional, and they perform admirably when it comes to capturing mouse pointer input on them. The majority of individuals, on the other hand, prefer to move their cursor around using a mouse rather than a touchpad. If you attach a real mouse to your laptop, however, you will be unable to utilize the touchpad as an input device at the same time (there would simply be a clash between the two and the touchpad might also become a source of unintentional input).

Disabling a laptop’s touchpad is a simple and straightforward process that is possible even on Windows 10 – the most recent and finest version of the Windows Operating System.

You might be interested:  How To Install Fonts Windows 10

Alternatively, if you simply want to have your computer’s touchpad switched off when you have a mouse attached to it, you’d be better off following the instructions at deactivate touchpad In contrast, if you wish to permanently disable your touchpad, you have arrived to the correct location.

The following are some of the most efficient techniques for disabling a touchpad on Windows 10 that you may employ without further ado.

Method 1: Disable the touchpad in Settings

When you upgraded to Windows 10, you gained the ability to switch on or off your laptop’s touchpad straight from the Operating System’sSettings utility. If you want to disable your touchpad from the Settings menu, all you have to do is follow these steps:

  1. Start by selecting Start from the Start Menu. Select Settings from the drop-down menu, then Devices. Touchpad may be found in the left-hand pane of the window. Right underTouchpad, there is a toggle switch that you may turn off in the right pane of the window. Close the Configurationwindow.

Method 2: Disable ETD Control Center from running at startup

A application called as ETD Control Center controls the touchpad on many laptop computers. This program is launched every time your computer boots up, and it is only while this program is operating in the background that your touchpad is operational. As a result, customers who do have ETD Control Center installed on their PCs can disable their touchpads by simply disabling the program’s automatic starting function. It would be preferable for users who do not have ETD Control Center installed on their PCs to use one of the other ways listed and detailed in this document instead.

  1. To open the Task Manager, press the keys Ctrl+Shift+Esc. Navigate to the Startuptab of the Task Manager and click on it. ETD Control Center should be located in the list of applications that are configured to start automatically when your computer boots up, and you should click on it to pick it. Disable the function by clicking on it.

Once you’ve done so, ETD Control Center will no longer run when your computer starts up, which means that your touchpad will no longer function properly.

Method 3: Disable your touchpad in Device Manager

In the Device Manager, every device that is linked to a computer is listed, and it is through the Device Manager that you may deactivate devices that are attached to your computer, preventing them from functioning properly. In this situation, the identical procedure may be used to disable the touchpad on your laptop. In order to disable your touchpad in Device Manager, you must do the following:

  1. To access the WinX Menu, use a right-click on the Start Menubutton or hit the Windows Logokey +X. In the WinX Menu, select Device Manager from the drop-down list. TheMouse and other pointing devicessection will be expanded if you double-click on it. Locate the entry for your computer’s touchpad, right-click on it, and then click onDisable. Confirm the operation by clicking onYes in the window that appears. If you see numerous items with the same name (for example, “HID-compliant mouse”), simply deactivate each entry one by one until you discover the one that corresponds to your touchpad’s configuration. Close the Device Manager application.

Method 4: Use Touchpad Blocker to disable your touchpad

If none of the techniques mentioned and detailed above have worked for you, worry not – you may still deactivate your touchpad by using a third-party program, which is discussed below. Touchpad Blocker is an example of an application that you may use to block the use of your touchpad. In short, Touchpad Blocker is a free, lightweight piece of software that can be configured to run at startup and that allows users to turn their touchpad off by pressing a specific key combination on their keyboard (with the only caveat being that the program must be running – whether it is in the background or in the foreground, it doesn’t really matter which – in order for this to be possible).

The following steps must be followed in order to obtain and utilize Touchpad Blocker:

  1. Please go to this link and click on theDownloadbutton in order to begin downloading an installation forTouchpad Blocker. Navigate to the location where you downloaded the program’s installer, and then double-click on the installer to launch it. Install Touchpad Blocker on your computer by following the instructions in the installation. Touchpad Blockerup should be enabled, and then all of your choices for the software should be configured.

In addition, Touchpad Blocker is a fully non-intrusive program that runs in the background (but can be accessed from the Notification Area), so you won’t even be aware that it’s there. In addition to being a proactive and self-motivated information technology specialist, Kevin also possesses extensive understanding of all areas of network infrastructure design, implementation, and management. Exceptional track record of completing many large-scale mission-critical projects on schedule and on budget in a timely manner.

5 Ways to Turn Off Touchpad on Windows 10

In laptops, the touchpad serves as a pointing device, and it takes the place of the external mouse that was formerly utilized in larger computers. However, even though the touchpad, also known as the trackpad, has been available for more than two decades, it has yet to completely replace the functionality and simplicity of use that comes with utilizing an external mouse. Some Windows laptops are provided with an amazing touchpad, but others are supplied with an ordinary or below-par touchpad, which is not uncommon.

  • Having two separate pointing devices available at the same time, on the other hand, might be counter-productive.
  • The frequency and likelihood of unintentional touches rise as the distance between the keyboard and the touchpad increases.
  • Fortunately, removing the touchpad on a Windows 10 laptop is a simple process that takes just a few minutes.
  • Because of the lack of an external mouse and a disabled touchpad, your laptop will be almost worthless unless you are familiar with keyboard shortcuts.

Additionally, to turn the touchpad back on, you will need to use an external mouse. Alternatively, you may choose to have the touchpad turned off automatically when the mouse is attached.

How to disable touchpad on Windows 10?

There are a plethora of options available for disabling the touchpad on your Windows 10 laptop. There are two options for disabling the touchpad: either search around in Windows Settings or the Device Manager, or use an external third-party tool to do so automatically. However, the quickest and most convenient option is to use the keyboard shortcut/hotkey that most laptop keyboard manufacturers have included. A key that allows you to activate or disable the touchpad will normally be placed in the top row of your keyboard and will be one of the f-numbered keys (for example, fn key + f9).

A physical switch/button in the top right corner of the touchpad, found on some laptops, such as those manufactured by HP, may be used to deactivate or enable the touchpad when double-clicked.

5 Ways to Turn Off Touchpad on Windows 10 laptops

It is possible to disable a precision touchpad on your laptop by modifying the touchpad settings in the Windows Settings. However, on laptops with a non-precision type touchpad, the option to deactivate the touchpad is not immediately accessible through the settings menu. Using the Advanced touchpad settings, they may still deactivate the touchpad if necessary. 1.Open Windows Settings by selecting one of the options listed belowa. Click on the start/windows button, type “settings” into the search box, and click Enter.

  • Select Settings from the power user menu by pressing the Windows key + X (or by right-clicking on the start button) on your keyboard.
  • Press the Windows key plus the letter I to open Windows Settings in a new window.
  • Locate the devices and double-click on them to open them.
  • Select Touchpad from the left-hand panel, which has a list of all the devices.
  • If you want your computer to automatically disable the touchpad when you attach an external mouse, uncheck the option next to ‘Leave touchpad on when a mouse is connected’ when you first boot up.
  • You may also configure the activities that take place when you swipe three-fingers and four-fingers in different directions over the touchpad’s surface.
  • When you do this, a Mouse Properties window will appear, which contains a higher amount of adjustable options for the trackpad.
  • Highlight/select your touchpad by clicking on it, and then click on thePropertiesbutton that appears at the bottom of the window to access its settings.

Finally, navigate to the Drivertab and click on Disable Device to turn off the touchpad on your laptop computer. Alternatively, you can opt to Uninstall Device, however Windows will prompt you to re-download the touchpad drivers every time your system wakes up, so be prepared.

Method 2: DisableTouchpadThrough Device Manager

User’s may examine and control any and all devices attached to their PCs using Device Manager, which is included with Windows. Using the device manager, you may activate or disable a specific piece of hardware (such as the touchpad on laptops), and you can also update or remove driver software. Follow the procedures outlined below to deactivate the touchpad using the device manager: 1.Open Device Manager by using one of the ways listed below. In the power user menu, press Windows Key + X (or right-click on the start menu button) and pick Device Manager from the drop-down menu that appears.

  1. Typedevmgmt.mscin Run the command (by clicking the Windows Key + R to launch the run command) and then click on OK.
  2. 2.
  3. 3.
  4. In the event that you already know which one relates to your touchpad, just right-click on it and selectDisable Device from the menu that appears.
  5. This solution will not work for all laptop users since the option to deactivate or enable the touchpad through the BIOSmenu is only available on select laptop models manufactured by specified manufacturers and OEMs.
  6. Check the BIOS menu to see if the option to deactivate the trackpad is available or not after booting into it.

Method 4: Disable ETD Control Center

The ETD control center is an abbreviation for Elan Trackpad Device Control Center, and as the name implies, it is responsible for controlling the trackpad on some laptops. Your laptop’s ETD application begins running automatically when it is turned on; the touchpad is only functional when ETD is operating in the background. The touchpad will be disabled as a result of preventing the ETD control center from starting during the boot up process. If, on the other hand, your laptop’s touchpad is not controlled by the ETD control center, you are better off attempting one of the other ways described in this article.

  • Click on the Start button, type Task Manager into the search box, and then click on Open when the search results are returned.b.
  • c.
  • To open Task Manager immediately, press the keys ctrl + shift + esc.
  • Open the Task Manager and navigate to the Startup tab.
  • Select theETD Control Center from the list of programs by clicking on it after it has been located in the list.

In the final step, select theDisablebutton located in the lower right corner of the task management window. 5. Alternative: Right-click on the ETD Control Center and then pick Disable from the options menu.

Method 5: Turn off Touchpad using third-party applications

If none of the solutions listed above were successful for you, you might want to investigate utilizing one of the many third-party programs that are accessible on the internet. Touchpad Blocker is one of the more popular programs for disabling the touchpad on laptop computers. A free and lightweight program that allows you to configure shortcut keys to enable and disable the application. Users who have a synaptic touchpad may additionally assign a shortcut key to turn on or off the touchpad itself when necessary.

When the touchpad blocker is active, it may be accessible from the taskbar.

Touchpad Blocker may be used to deactivate the touchpad in the following ways: 1.

Installing Touchpad Blocker on your machine is as simple as double-clicking on the downloaded file and following the on-screen instructions.

Once Touchpad Blocker has been installed, configure it according to your preferences and activate it by hitting the keyboard shortcut for it (Fn + f9).

Despite the fact that they are not as feature-rich as Touchpad Blocker, both of these programs assist in eliminating the inadvertent palm touches that users make when typing.

It is unnecessary to worry about disabling or enabling the touchpad every time you want to use it when you use either of the two programs.

Recommended: How to Resolve a Non-Working Laptop Touchpad in 8 Steps We hope you were successful in deactivating the touchpad on your Windows 10 laptop, but if you were not, please let us know in the comments box below and we will assist you further.

If so, please share your thoughts with us and the rest of the world in the comments section below.

Leave a Comment

Your email address will not be published. Required fields are marked *