How To Do A Fresh Install Of Windows 10


How to: Perform a Clean Install or Reinstall of Windows 10

We recommend that you try a lower page number. * Please enter only numbers. * We recommend that you try a lower page number. Please only enter digits in this field. Andre, This is an excellent essay. This is really evident. Your step-by-step tutorial, on the other hand, does not address a difficulty that I’m encountering. I am able to successfully complete the stage just before the OOBE. My computer boots up again, but it defaults to the DVD drive, which is still installed. Afterwards, I am given the option to reboot from a CD or DVD by pressing any key.

My computer will simply shut down if I don’t press any keys.

Dennis Success.

I’ve gotten everything up and running now.

  • Was this remark of assistance?
  • Great!
  • What level of satisfaction do you have with this comment?
  • What level of satisfaction do you have with this comment?
  • This is strange, what is your default boot device in the BIOS, is it a hard drive or a DVD drive?
  • Best, Andre MVP-Windows and Devices for IT (Windows Insider MVP-Windows and Devices for IT) ADACOSTA on Twitter and at This remark was deemed to be useful by 15 people.
  • Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

If I create the hard drive first, I will be unable to boot from the DVD to begin the installation process.

While trying to install a slew of updates, I discovered that I could no longer boot from my hard drive.

But I’m not convinced that’s the source of my difficulties.

To restart, use the keys Ctrl+Alt+Del.

This comment was useful to 14 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

The answer is simple: you would need to reinstall Windows 10.

This occurs immediately before the OOBE: As soon as this phase of setup is over, Windows will automatically restart and enter the setup process once more.

If your machine is equipped with more than one hard disk, tell us about it.

If you do, make sure to unplug them before proceeding with setup.

Did you find this comment helpful?


What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

Andre, I’m not a member of the OOBE.

However, as I said in the update to my initial post above, I was able to retrieve the DVD in time for my PC to start from the hard drive instead of the DVD drive itself.

Thank you for the article and for your assistance.

Was this remark of assistance?


What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

Understandable, however we require an iso or a file that can be used to create a bootable disk for the primary operating system.

This remark was useful to 25 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

I was disappointed to learn that I would be unable to use the upgrade to perform a clean install from the outset.

Was this remark of assistance?


What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

So, I’d want to ask you a question: I’ve completed the free upgrade of my Windows 7 operating system and now wish to reinstall Windows 10 utilizing a clean installation procedure.

This is the funny part: when I run the MGADiag.exe application to verify the authenticity of the installation, it displays a key that looks precisely like the Windows 10 Insider Preview Key.

To do this, multiply Cur by 256, and then multiply Cur by Cur * 256, and then multiply Cur by Cur * 256, and then multiply Cur by Cur * 256, then multiply Cur by 255, and multiply Cur by Cur Mod.

I have now updated a second Windows7 license as well, and when the key is extracted, it appears to be the same as the first.

I did not utilize a Microsoft Account, and I will not be persuaded to do so in the near future.

Was this remark of assistance?


What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

Do you have the same difficulty as I do?

Windows 7, Windows 8.1, and now Windows 10 10 This remark was deemed to be useful by 15 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

Afaik: As soon as I update to Windows 10, my Hardware-Setup is stored in a Microsoft database and tied to a free Win10 license.

Yes, there is a lot of information regarding this, but it comes from third-party sources.

What happens if my hardware changes AFTER the one-year period following the release of the software?

As an alternative, is it possible for me to at least utilize my ‘old’ Windows, which I previously used to upgrade to Win10, or is the license no longer valid (you state that one can only ‘go back’ for 30 days).

According to my understanding, the license cannot be ‘invalidated’.

Officials from Microsoft have not responded to any of the inquiries.

This comment was found to be useful by 32 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

What level of satisfaction do you have with this comment? Thank you for taking the time to provide comments. * Please try a page number that is lower than the current one. * Please insert just digits in this field. The page number should be reduced, if possible. Only numbers should be entered.

How to do a Clean Install of Windows 10 the Easy Way

Old data, settings, and applications from your prior Windows system are transferred over to your new Windows system as part of the Windows 10 upgrading process. With a clean install, Microsoft gives you the option of starting with a completely fresh system. This is particularly beneficial if you’ve just acquired a new Windows 10 PC that comes pre-installed with bloatware that you don’t want or need. Alternately, you may need to conduct a clean install on a machine that does not already have a Windows operating system installed after installing a new hard drive.

To obtain DVD playback, you may always install VLC or utilize one of the more fully featured Windows Media Center competitors, which are both available for free.

At one point in the past, customers were compelled to upgrade to Windows 10 before they could start again and perform a clean install, which was a very convoluted and time-consuming process.

Option One: Create Installation Media and Install Windows from Scratch

Where to Legally Download Windows 10, 8.1, and 7 ISOs (Related) With Windows 10, the traditional approach of completing a clean installation is still our preferred technique. You only need to download and prepare installation media, which may be either a DVD or a flash drive, and then install it from that media. Microsoft offers a free download of the Windows 10 media production tool. This application will download the right Windows 10 installation files for your machine and will guide you through the process of creating an installation DVD or USB flash drive using those files.

Choose the appropriate type of installation disk for the version of Windows 10 that has been licensed for your computer — either Windows 10 Home or Windows 10 Professional.

The 64-bit version will be preferred by the vast majority of users, but you may build installation media that contains both versions, and the installer will automatically choose the most appropriate one when you use it to install Windows on a computer.

Start your computer with the USB drive or DVD drive installed, and choose that device as the boot device.

Once the Windows installer begins, select “Install Now” to begin the installation process. Following that, you’ll be presented with the activation screen. What you do here is determined on your current situation:

  • If this is the first time you’ve installed and activated Windows 10 on this machine, you’ll see the Windows 10 activation screen. In this field, type in your Windows 10 product key. Please insert your valid Windows 7, 8, or 8.1 key here instead, in the event that you do not have one. If you’ve already installed and activated Windows 10 on this machine, choose “I don’t have a product key.” Otherwise, select “I don’t have a product key.” Once Windows has been installed, it will begin to operate automatically.

The second scenario is possible because of the way Windows 10 activates computers. As part of the first installation and activation of Windows 10 on a system, the installer verifies that you have a “genuine Windows” system installed and registers your hardware with Microsoft’s cloud-based servers. If all goes well, you shouldn’t have to input the key again on the same computer since Microsoft will detect your hardware the next time you install Windows 10 on that machine, validate that it’s registered, and then automatically activate the operating system.

  1. When conducting a clean install, make sure to select the “Custom” option to ensure that you are not executing an upgrade install.
  2. The installer will replace any existing partitions on your computer if you just have one Windows partition.
  3. It should immediately activate itself once you connect to the Internet on your new, freshly installed Windows 10 PC after you log in for the first time.
  4. Select the “Activation” tab from the drop-down menu after clicking the UpdateSecurity button.
  5. In addition, take note of the Windows 10 edition that you have installed – either Windows 10 Home or Windows 10 Pro.
  6. When we reinstalled Windows 10 Pro on our machine, it was enabled very soon after installation.
  7. If it is not enabled, you may be able to find information below that may assist you with activating it.
  8. If an activation is not occurring automatically after going through the processes outlined above, the following command can be used to compel it to occur.
  9. Enter the following command: slmgr.vbs /ato into the command line: Many users have reported that they have to run this command multiple times.

If you see an error notice, try restarting your computer and running it again, waiting and running it again, or simply waiting and allowing Windows to activate itself. It’s possible that Microsoft’s servers are overloaded at the time you’re attempting to activate.

Option Two: Perform a Reset and Remove Everything

In the event that you’ve previously updated to Windows 10 and wish to perform a new installation, there is a simpler alternative. You may utilize the Reset option to restore your Windows 10 machine to its factory default settings. If you installed Windows 10 on your own computer, this should provide you with a whole new Windows system in no time. There are a few drawbacks, however, including the fact that this strategy is not appropriate for every case. It is likely that if you purchased a computer that came pre-installed with Windows 10, doing so would bring back the bloatware that was pre-installed on your Windows 10 PC.

  • In order to reset your Windows 10 computer, open the Settings app, choose Updatesecurity, select Recovery, and then click on the “Get started” option under Reset this PC to begin the process.
  • This will completely wipe your hard drive, so make sure you have backups.
  • If you make a modification to the PC’s hardware after taking advantage of the offer, you may need to contact Microsoft and finish the phone activation procedure, explaining what occurred.
  • Even if Windows 10 does not activate automatically, the phone support line can provide you with an activation code that will allow you to activate the operating system.
  • Technically, the free Windows 10 upgrade (as well as OEM copies of Windows and pre-installed versions of Windows 10) aren’t allowed to be transferred to a different computer, according to Microsoft.
  • Photograph courtesy of Brett Morrison on Flickr
You might be interested:  How To Run Chkdsk Windows 10

How to perform a clean install of Windows 10

Having the ability to conduct a clean installation of Windows 10 is a valuable skill to have. It’s a must-have if you’re intending to construct your own computer from the ground up. If you’re having troubles with your system and have exhausted all other options, it’s the final resort. It’s also the only way to get rid of any pre-installed bloatware that came with the machine from the manufacturer. Going into the settings and pressing the reset button on Windows 10 is not the same as performing a clean install of the operating system.

When you perform a clean install, Microsoft provides you with a factory-fresh image.

If, on the other hand, it is exactly what the circumstance requires, then please allow us to assist you.

It is necessary to have access to a Windows 10 PC in order to produce the image from which you will be installing from the beginning. Aside from that, you’ll need an 8GB or bigger USB flash drive as well as some spare time to complete the project.

(Photo courtesy of TechRadar.)

Before you begin

It is necessary to first check that you have a valid Windows 10 license before proceeding with the clean installation of Windows 10. If you already have Windows 10 installed on your computer, you can verify this by navigating to the ‘Settings’ program in the Start menu. From the sidebar, choose ‘UpdateSecurity’ and then ‘Activation’ to proceed. You’ll now see a notification stating that Windows 10 has been activated, either with a digital license or with a digital license that is tied to your Microsoft Account, depending on your configuration.

You will need to input the activation key throughout the installation process.

In addition, you should take the time to back up any vital files and data because this operation will totally wipe your computer.

How to perform a clean install of Windows 10

To complete the procedure, there are two steps. For the first step, you’ll need to get the most recent Windows 10 image from Microsoft and use it to create a bootable flash drive. That image is then used to install Windows 10 on your computer in the second stage. Because the Windows 10 image is fairly large, the precise length of time it will take you to finish this procedure will be determined in part by your internet connection speed. Installing software will also be significantly faster on faster SSDs as compared to older HDDs.

This will not only assist you in downloading the most recent Windows 10 image, but it will also enable you to create a bootable USB drive from which you may install the operating system.

Not only that, but it may be operated as a stand-alone program without the need to install anything.

2. Create a bootable flash drive

Open the Media Creation Tool on your computer’s desktop. Select the option to ‘Create installation media for a different PC’ and agree to the terms and conditions of the license. The following step is to select a language, edition, and architecture for Windows 10 to be installed. For the most part, x64 architecture will suffice, and the edition will need to correspond to whatever you have a license for in order to function properly. All that’s required is that you choose both or x86 if you know you’ll be using it on a 32-bit computer.

Then select your flash drive from the list. To complete the procedure, click on ‘Finish’ once again and the program will begin the download of Windows 10 and creation of the USB installation drive. (Photo courtesy of TechRadar.)

3. Boot the Windows 10 installer from the USB flash drive

Once the Media Creation Tool has completed its work, you’ll need to connect it to the computer on which you’d want to do a fresh installation of Windows 10. First and foremost, in order for the installation to execute, you must instruct your computer to boot from the USB device rather than the internal SSD or hard disk. The BIOS is the most convenient place to accomplish this. If you’re putting together a new computer, this is also the only method to go about it. When you initially switch on your computer, you’ll be prompted to hit a key to access the BIOS, which may also be referred to as ‘Setup.’ It will vary from computer to computer, but it is likely to be anything like ‘F2’, ‘F12’, or ‘Delete.” Once you’re in the BIOS, navigate to the ‘Boot’ panel and make sure the USB drive you just created is listed first in the list of priority devices.

If you want to restore to your usual boot priority once Windows 10 has been installed, you may easily erase this setting.

4. Install Windows 10

The remainder of the process is rather basic. Your PC will be taken through the whole installation procedure after it has booted into the Windows 10 installer once it has been configured. Essentially, you’ll select the location where Windows 10 will be installed, and the application will take care of the rest. In the event that you need to input an activation key during the installation process, you’ll be given the option to do so throughout the procedure, but you may also do it later using the ‘Settings’ app.

As soon as the installation is complete and your computer restarts, either remove the USB flash drive from which you were installing Windows 10 or enter the BIOS settings to instruct your computer to boot from your specified Windows 10 disc.

5. Complete the Windows 10 setup process

It is necessary to complete the regular Windows 10 setup, which includes entering your network information, Microsoft Account credentials, and a variety of other options as needed. The final step might include Windows 10 obtaining and installing the most recent updates, which could take some time. Once all of this is completed, you will be presented with a brand new, factory-fresh Windows 10 desktop.


The process of performing a clean installation of Windows 10 is not difficult, but it does take some time. Nonetheless, it is a vital component of PC construction, the most effective method of upgrading your current internal drives, and, in some cases, a simple solution for sluggish, bloated PCs. Fortunately, all you need is a USB flash drive and the following simple procedures to get back up and running again.

How to do a clean install of Windows 10: Which option is best for you?

A clean install is regarded as a time-honored procedure among Windows professionals, serving as a method of removing accumulated cruft and bringing an outdated PC back to life.

Must-see offer

Install Windows 10 on your computer. Do you want Windows 10 Home or Windows 10 Pro? Which one do you want? Are you unsure? Microsoft has further information on the various Windows 10 editions. More information can be found at Clean installations have a plethora of absolutely valid reasons to be performed.

Possibly, you are repurposing an outdated but still functional computer for usage by another member of your family or by a member of your organization.

Alternatively, you may simply desire a fresh start.

  • Installing and managing security and feature updates in Windows 10 is covered in detail in this article.

A clean install is the ultimate troubleshooting procedure since it is practically certain to eradicate performance or compatibility issues caused by third-party software, temporary files, configuration mistakes, and common viruses. A clean install may be performed on any operating system. The end result is a PC that starts from a known-good condition, with either the default Windows 10 setup or a previously tested configuration that contains particular third-party applications and drivers, depending on the configuration.

Here are the advantages and disadvantages of each strategy, as well as some suggestions on when to use each one.

Use a recovery image from the OEM

For those who acquired a PC with Windows 10 already installed, you may be able to restore the computer to its factory default state by selecting Restore from Factory Image. Because the stored image has all necessary drivers, tools, and hardware support to ensure that all of your devices function as intended as soon as you sign in for the first time, this is a welcome development. It’s a shame, because the saved image also contains whatever crappy software the manufacturer was paid to preinstall alongside your otherwise flawless Windows 10 installation.

Aside from the aforementioned crapware, the most significant disadvantage of this option is that you’re more than likely to end up with an out-of-date Windows installation, necessitating the installation of a time-consuming full feature update, followed by the most recent cumulative update, after your recovery has been completed.

When you start your PC in recovery mode, you may be presented with the choice to restore an OEM image from a dedicated partition, or your OEM may have included a tool that downloads the most recent image from their servers on your behalf.

In addition to recovery images for Dell, HP, Lenovo, and Microsoft Surface devices, see “How to acquire a free Windows (or Linux) recovery image for your OEM PC” for information on where to obtain recovery images for other OEM PCs.

Restore from a backup image

For those who acquired a PC with Windows 10 already installed, you may be able to restore the computer to its factory default settings by selecting Restore from Factory Image. Because the stored image has the necessary drivers, tools, and hardware support to ensure that all of your devices function as intended as soon as you log in for the first time, this is a positive thing. But the bad news is that the stored image will also contain any crappy software the vendor was paid to bundle with your otherwise flawless Windows 10 installation.

After you’ve removed the aforementioned junkware, the most significant disadvantage of using this method is that you’re likely to end up with an out-of-date Windows installation, necessitating the installation of a time-consuming full feature update, followed by the most recent cumulative update once the restoration procedure is complete.

When you start your PC in recovery mode, you may be presented with the choice to restore an OEM image from a dedicated partition, or your OEM may have included a tool that downloads the most recent image from their servers on your computer.

Information on where to obtain a free Windows (or Linux) recovery image for your OEM PC may be found in the section titled “How to acquire a free Windows (or Linux) recovery image for your OEM PC.”

Use the Windows 10 Reset This PC option

When you use this function, which has been greatly modified since its introduction in Windows 8, it creates an entirely new copy of your current Windows version, removing any third-party drivers or applications that may be creating issues. You will not require any installation disks or product keys, and you will not be required to make any changes to your firmware settings in order to boot from an other device. You will not be able to reset your computer by accident. Generally speaking, the procedure consists of at least four phases that need you to make decisions, with one last affirmation that spells out in crystal plain words exactly what is about to take place.

To begin, go to SettingsUpdateSecurityRecovery and select the appropriate option.

Choose Keep My Files (which is the best option if you want to reuse the computer yourself) or Remove Everything (which is the best option if you’re selling the computer or handing it on to someone else) from the first set of options.

(If you’re resetting the PC for personal use, you may skip this step.) Beginning with Windows 10 version 2004, the Reset This PC option allows you to choose whether you want to reinstall Windows using the already installed copy or if you want to obtain a new copy of the operating system from the internet.

(Please keep in mind that this is an estimate.) If you want to start again in the shortest amount of time with the least amount of effort, the reset method is the ideal choice.

Note that if your system has been infiltrated by malware or if any system files have been destroyed or corrupted, a reset may not be effective.

Reinstall from bootable Windows 10 recovery media

This option provides you with the most amount of control over the clean installation procedure. It also necessitates higher-than-average technical abilities and, in most cases, some post-installation fiddling to verify that all hardware functions correctly and that the appropriate functionalities are available. There are three steps in the process:

  • To begin, download the most recent installation files from theDownload Windows 10page and use the Media Creation Tool to build a bootable USB flash drive using the newest installation files. (See my FAQ, “Windows 10 updates: How to install, reinstall, upgrade, and activate,” for more information.)
  • Finding the correct combination of keystrokes and/or incantations to boot directly from that drive into the Windows Setup application is then the next step to do. If required, you may use the built-in tools to reformat and/or repartition the destination hard disk. Your previous files will remain on your computer’s hard disk in a folder called Windows.old if you miss the formatting stage. Install Windows 10 at the end of the process. It is possible to skip beyond the portion where you are prompted to provide a product key if you are using hardware that has already been activated
  • Windows will activate automatically once you log in for the first time.
You might be interested:  How To Turn Off Fast Boot Windows 10

You’ll need to use Windows Update to install the latest updates, which may contain hardware drivers for devices that aren’t included in a typical Windows installation. It is necessary to wipe away the Windows.old folder and then complete the remaining setup steps if you did not format the system disk prior to installing the operating system on it.

8 Important Things to Do After Installing Windows 10

After that is completed, you’ll need to utilize Windows Update to install the most recent updates, which may contain hardware drivers for devices that aren’t included as part of a typical Windows installation package. It is necessary to wipe away the Windows.old folder and then complete the remaining setup steps if you did not format the system disk prior to installing the software.

1. Run Windows Update and Configure Update Settings

Even if you have just recently upgraded to Windows 10, there is a good probability that you will need to download and install some recent updates. You should install them as soon as possible to ensure that you have the most up-to-date features and security updates. Whether you want to see if there are any Windows updates available, open the Settingsapp (by pressing Win + I or clicking on the symbol in the Start menu) and navigate to UpdateSecurityWindows Update. On this screen, click the Check for updates button and allow it some time to complete.

Whenever there are any that require a restart, you’ll be given the option to do so.

Windows Update is triggered automatically in Windows 10 by default.

How to control Windows Update in order to ensure that it runs properly in the background.

2. Make Sure Windows Is Activated

In contrast to previous versions of Windows, Microsoft makes it simple to install Windows 10 on your computer even if you do not have a valid license. This step is necessary if you did not submit a license key or sign into a Microsoft account that has a digital license during the installation process. You will be able to utilize all of the features of Windows 10 as a result. Check if you’ve activated Windows by going toSettingsUpdateSecurityActivation in the Settings menu. Assuming you have, you’re good to go.

For more information, please see our article on how to remove the “Activate Windows 10” watermark. Windows 10 may be used without the need for an activation key, but there are certain restrictions.

3. Update Your Hardware Drivers

The term “device driver” refers to software that communicates with and controls the operation of a certain device when it is attached to your computer. In other words, drivers allow Windows to connect with your computer’s hardware in an appropriate manner. In most cases, drivers are given by the hardware manufacturers and, like other software, they are not always error-free. They can be unstable at times, or they may not have received any upgrades to ensure that they are compatible with the most recent versions of Windows.

However, when you are first setting up Windows, installing the correct drivers is a critical part in the process.

Instructions on how to locate and replace outdated drivers may be found at how to identify and update outdated drivers.

4. Install Essential Windows Software

Windows 10 comes pre-installed with a number of basic programs that may be used for a variety of tasks, but many of the finest Windows applications are not included. We’ve put up a comprehensive guide to the Windows applications that everyone should download and install right immediately. View our recommendations in areas like as browsers, security, picture editing, messaging and more by clicking on the link above. Whether you’ve just begun using Windows 10 or have completely reinstalled it, having the correct tools at your disposal will make your experience significantly better.

5. Change Default Windows Settings

Numerous of the top Windows applications are not pre-installed on Windows 10, which is a shame because the operating system comes with a slew of basic programs for many uses. Everyone should immediately install the Windows program that we’ve published a comprehensive tutorial to. View our recommendations in areas like as browsers, security, picture editing, communications and more by clicking on the link provided. The appropriate tools will make a significant difference in your Windows 10 experience, whether you’ve just begun using it or have reset it.

Adjust Default Windows Apps

After you’ve installed your preferred applications, you should make them the default applications on your computer. Follow these steps to modify the applications that Windows 10 uses for a variety of functions:

  1. Navigate toSettingsAppsDefault applications
  2. Choose your favorite programs from each category, which may include email, music player, web browser, and other applications. Choose default applications based on file type in the section below that. if you’d want to associate different file formats, such as PDF, DOCX, and TXT, with certain apps, you may do so with a file association tool. If you prefer a different view, select Set defaults by app and then select a specific app to see which settings it currently has and which ones it may use.

For more information on how to accomplish this, see our guide on establishing defaults in Windows 10.

Disable Unnecessary Startup Items

Many applications configure themselves to run automatically at startup, which wastes resources and causes your computer to take significantly longer to load up.

After you’ve installed software, you should check to see that only permitted applications are launched when the computer starts. Disable unused startup items in Windows 10 by following these steps:

  1. To access the Task Manager, press Ctrl + Shift + Esc, or right-click on the taskbar and selectTask Manager from the context menu. If necessary, selectMore information to switch to the full-screen mode. Navigate to the Startup tab. Make a right-click selection on any application that you do not wish to start automatically and selectDisable to prevent it from starting at startup.

Optimize Power Plan Settings

Open the Task Manager by using the keys Ctrl + Shift + Esc together, or by right-clicking on the taskbar and selectingTask Manager from the drop-down menu. The complete view may be accessed by selecting More information from the drop-down menu. The Startup tab should now be selected. If you don’t want an app to start automatically, right-click on it and selectDisable to prevent it from starting at startup.

  1. Navigate to SystemPowersleep in the Settings menu. Additional power options may be found on the right side of the screen, and this will open the Power Options area of the Control Panel. If you don’t see this link on the right, try increasing the horizontal size of the Settings window
  2. It should display eventually. The options available to you will be Balanced, Power Saver, and High performance. You can pick from any of these plans. Choose the plan you want, then clickChange plan settingsto the right of the screen to make changes. Make a selection for the period of time that should elapse before the screen goes dark and the computer goes to sleep. Then selectChange advanced power settings to see a list of other choices. Even if you may go over anything here, you should pay close attention to the settings under the Hard disk and Sleep, Power buttons and lid, Processor power management, and Displaycategories
  3. Otherwise, you will be disappointed. To save your changes, click the OK button.

For further information, see How to Use Windows Power Plans to Save Battery Life on Your Laptop.

Tweak Privacy Settings

Windows 10 collects a plethora of information about your computer’s operation and how it is used. This helps Microsoft enhance the constantly developing product, but it is seen negatively by many as an infringement of their privacy. Fortunately, you have the option of reducing or disabling many of the telemetry services. For all you need to know about Windows 10 privacy settings, see our comprehensive guide.

Enable Night Light

When you turn on your computer’s display at night, a built-in function makes the screen display warmer. This helps to lower the amount of blue light that keeps you awake and makes your computer less harsh on your eyes when working late at the computer. This may be enabled by going toSettingsSystemDisplay and selecting it. Enable theNight lightslider and then clickNight light settingsto customize the way the lights function at night. You may choose the strength of the effect and set it to run automatically from sunset to sunrise or during specific hours of your choosing, or you can manually control the effect.

6. Set Up a Backup Plan

The last thing you’d want is to go through all of these Windows setup processes only to have your machine completely destroyed by a virus infestation or a dead hard disk. It is critical to back up your data in order to keep it safe from these and other threats. In this article, we will show you how to back up and restore data to the cloud in Windows 10 in a straightforward manner. We’ve also covered which files you should back up and which ones you should leave alone.

7. Configure Microsoft Defender

Microsoft Defender, the built-in antivirus software included with Windows 10, is adequate for the majority of users. Following the installation of Windows 10, your computer will be protected against a wide range of threats. The best course of action is to examine how it operates and make modifications to boost your computer’s resilience to attacks. Improve your security with Microsoft Defender by learning how to get the most out of this powerful protection program!

8. Personalize Windows 10

Despite the fact that it is not as critical as the preceding procedures, you should nevertheless spend some time customizing your desktop after installing Windows 10. It’s surprising what a new wallpaper, a distinctive mouse cursor, and other tiny personalization modifications can do to make your computer seem more like a home away from home.

You have a plethora of alternatives in this regard. We’ve demonstrated how to make some easy adjustments to the appearance and feel of Windows 10 in the video below. Try some of the greatest tools for customizing Windows 10 if you want to get more in-depth.

After Installing Windows 10, You’re All Set

You no longer have to be perplexed as to what to do next after installing Windows 10. We’ve taken a look at the most important things to perform after a fresh Windows 10 installation to ensure that your machine is ready for daily usage. While you may still need to make a few minor adjustments here and there, the most of the work is done during the first setup. Meanwhile, to ensure that your computer continues to work well in the future, make sure you understand how to maintain your system clean.

Here’s a simple, step-by-step approach to returning your Windows PC back to its former, clean state.

In 2016, he quit his IT career to pursue writing full-time, and he hasn’t looked back since.

More Adapted from Ben Stegner

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

How to Reinstall Windows : HelloTech How

Get tech advice, reviews, free ebooks and special discounts by signing up for our newsletter. Subscribe by clicking here.

How to Reinstall Windows from PC Settings

Windows 10 gives you the option of reinstalling a new version of your operating system over the top of your existing one. This will give you the option of keeping your data or deleting them in order to perform a new reinstall. To begin the procedure, choose one of the three options listed below:

  1. To begin, press the Start button. This is the button with the Windows logo in the lower left corner of your screen
  2. Then select Settings from the drop-down menu. This is the gear icon, which is located directly above the power button on your device. After that, choose UpdateSecurity. Recovery may be found on the left-hand menu panel. The recovery choices will be displayed on the right-hand side. Get Started is included under the Reset this PC section. You can choose whether to keep your data or to delete everything. Even if you opt to keep your files, just your personal information will be retained. All of the applications and settings that you have installed on your computer will be deleted
  3. Finally, press the Reset button. Your machine will restart and a new installation of your operating system (OS) will be installed

It will be necessary to build a recovery disc if your computer is not functioning properly. You’ll need a USB flash drive with at least eight gigabytes (8GB) of storage space to accomplish this.

You might be interested:  How To Download Minecraft Windows 10

How to Create a Windows 10 Recovery USB Drive

Using a recovery disk may be necessary if you are unable to restore your operating system (OS) using the reset options on your computer. This article will show you how to make a Windows 10 recovery USB drive. Please be aware that when you create a Recovery drive, you will lose all of the data stored on your USB hard drive. Don’t forget to make a backup of your information beforehand.

  1. After clicking on the Search button, put “recovery drive” into the search box that appears. In the bottom left corner of your screen, there is a magnifying glass that represents the search button. Activate the recovery drive application and choose your drive
  2. Then click on the Create button.

You can expect it to take several minutes to build your recovery disk.

How to Reinstall Windows From USB Recovery Drive

Now that you’ve created a recovery drive, here’s how to reinstall Windows using a USB flash drive. Please keep in mind that if you recover from a USB device, you will lose access to all of the contents on your computer. A fresh installation of your operating system will be performed, providing you with a new version of your operating system.

  1. Connect your USB recovery disk to the computer on which you wish to reinstall Windows
  2. Restart your computer. If it has already been turned on, you will need to turn it off and on again. Initially, you will see a Choose an Option display
  3. Once it has started, you will see a Choose an Option display
  4. Select Troubleshoot from the drop-down menu. Then select Recover from a Drive from the drop-down menu. Then select “Just delete my files” from the drop-down menu. If you intend to sell your computer, you should select the Full clean the drive option. This option will take longer to complete, so make sure your computer is connected. Last but not least, configure Windows.

How to Reinstall Windows 10 on a Non-Working PC

Alternatively, if your PC is not responding, you may try reinstalling Windows using the Microsoft media creation tool. Here’s how to do it.

  1. Download Microsoft’s media creation tool from a machine that is currently operational
  2. Open the tool that you have downloaded. The download may be found in the Downloads folder on your computer. Select the “create installation media” option from the drop-down menu. Make use of the settings that have been advised for this PC. The recovery drive’s language, operating system version, and architecture may all be customized via this menu. Then choose USB flash drive as your storage device. Choose your USB drive from the drop-down menu. Wait for the media production program to download and install on your computer. This may take a few minutes
  3. Please be patient. Connect the USB drive to the machine that isn’t working
  4. Restart the computer to get things going again. It will boot from the USB disk that has been plugged, and the installation procedure will begin. Then, once you’ve entered your information and choices, click Next. Install immediately by pressing the Install button. When asked, type in the product key for Windows. A sticker connected to your computer or laptop will include this information
  5. On the conditions page, click Next. You will then be directed to the remaining stages in the installation of the operating system. Follow the on-screen directions until the procedure is completed successfully. As soon as the clean install process is over, you will be able to set up your computer or laptop as if it were brand-new.

If you are experiencing troubles with your computer after upgrading to Windows 10, please see our post on how to downgrade Windows 10.

How to Easily Reinstall Windows 10/11 Without Losing Data (3 Ways)

Hello, there. I’m having problems with my laptop, and I’ve been advised that the only way to fix the problem is to reinstall Windows 10.

Despite the fact that I can’t remember where I put my CD, I still have my product key. My issue is, if I reinstall Windows 10, will the data on my laptop be erased, or will I be required to back it all up to a hard drive?”

How does reinstalling Windows 10 work, will it erase your data?

In the event that you have tried several techniques to address system difficulties and none of them have worked, it may be necessary to clean install Windows 10 in order to have all of your issues resolved. Is it true, however, that this method deletes your vital data? Is it possible to reinstall Windows 10 without losing any data? To be honest, it all depends on how you go about it: By utilizing Repair Install, you may pick whether to install Windows 10 while preserving all of your personal data, programs, and settings, whether to maintain only personal files, or whether to preserve nothing at all.

  1. Using an installation disk to execute a clean install will not result in the deletion of your data; instead, it will be transferred to the Windows.old folder in the root directory of the C: drive when the installation is complete.
  2. In the event that you are confident that all of your data and apps are in good shape and have nothing to do with the difficulty you are experiencing, you may pick a method of reinstalling Windows 10 that will not result in the loss of your files and programs.
  3. And, once the installation is complete, Windows will restore these files and settings to their original locations.
  4. The following is a quick navigation guide for Windows 10/11 reinstallation:

How to reinstall Windows 10/11 without losing data

As previously indicated, there are three various techniques you may use to restore the operating system. Following that, each of the three approaches will be demonstrated in turn in this article. In addition, for each procedure, a step-by-step instruction will be provided. You can use any of these approaches depending on your individual requirements. Please continue reading for more information.

Method 1: Repair install Windows 10/11 without losing any data

If your Windows 10 can boot and you are confident that all of the installed apps are functioning properly, you may use this approach to reinstall Windows 10 without losing any data or programs. If one or more of your programs becomes corrupted, it is best to retain just personal files on your computer. On build an installation ISO file, first download Windows Media Creation Tool from and burn it to a disc. 2. To mount the ISO file, double-click it (for Windows 7, you need to use other tools to mount it).

  1. 3.
  2. 4.
  3. 5.
  4. 6.

This may take a long since it will be scanning your hard disk and relocating data at the same time as it does other things. If you just wish to keep your files in their current location, the next technique is recommended.

Method 2: Fresh install Windows 10/11 without losing personal files

The “Reset this PC” tool in Windows 10 is designed to assist you in troubleshooting system issues by restoring your machine to its factory settings. Throughout the procedure, you will have the option of retaining or discarding your personal files. 1. Make a start. Reset this computer from the computer or from the boot menu. If you have a functional PC that is still bootable, please go toSettingsUpdateSecurityRecovery and follow the instructions. Reset this PC and then pick Get Started from the Reset this PC drop-down menu.

  1. Make repairs to your PC.
  2. 2.
  3. It will delete programs and settings from your device, but it will leave your personal data in their current location.
  4. Confirm your choice by clickingReset.
  5. The following diagram illustrates the procedure: 1.
  6. Right-click on the Command Prompt, and then pick “Run as Administrator” from the drop-down menu that appears.
  7. In the command prompt window, type ” systemreset ” (without the quotation marks) and hit Enter.

Method 3: Clean install Windows 10/11 without losing data

The following approach can be used to upgrade Windows 10 if you wish not to lose any data from your USB drive or installation disc during the installation of Windows 10. Before you proceed, you must first ensure that your C: disk has more than 16GB of free space available. Start by inserting your installation DVD and starting from it. If you don’t already have one, you may download the Windows Media Creation program to create one from scratch. Select the language and keyboard from the drop-down menus once it loaded, then click ” Next “.

  • Select ” Install Now ” from the drop-down menu.
  • Most of the time, if you install the same version of Windows 10 as you did previously, your computer will be activated immediately when it is connected to a network.
  • Select the “Custom” installation type from the drop-down menu.
  • On the following page, just pick the C: drive and press the Next button to continue.
  • The data on the C: drive will not be lost as long as you do not format the disk during the setup process.
  • A folder named Windows.old is created in the root directory of the C: disk when the installation is complete.

All of your files are kept in this location. You may use Disk Cleanup to remove the Windows.old folder once you have copied all of the data you want from the Windows.old folder. This will free up disk space.

Reinstalling Windows 10/11 isn’t always a perfect solution

Despite the fact that there are a variety of strategies to pick from, they all have certain flaws when it comes to practical application. For example, the first way will maintain your applications but will not correct any problems that have arisen as a result of them. As a result of the fact that the other two techniques can only retain your files, you will have to spend additional time and work reinstalling these applications. That is why I believe that reinstallation is not the best solution.

In this way, even if your computer breaks in any way, you can utilize the system backup to restore it and continue using it as usual without losing any data.

  • The program makes it simple to back up a file, a partition, a system, or even the entire drive. It can spare you from manual operation by scheduling backups on a daily, weekly, or monthly basis, for example. It will only backup updated files instead of all files when using the incremental/differential backup mode, which dramatically minimizes the likelihood of backup disk full difficulties. Depending on your preferences, you may alter the compression level, divide backup images, use the Microsoft VSS service, and perform intelligent sector backups. It is compatible with a variety of Windows operating systems, including Windows 11/ 10/ 8.1/8/7/XP/Vista.

Download this program and use it to build a backup image right away by following the steps below.

Backup Windows 10/11 to protect everything on it

Creating a system image backup in Windows 10/11 with free backup software is a good option for those who wish to recover their computer fast and conveniently without losing any of their saved personal data or installed applications. It’s important to note that a single backup will only backup the objects in the system partition at the time of creation, and any modifications made after that will not be saved. Consequently, if you don’t want to risk losing any crucial data, it’s recommended that you set up an automated backup routine in Windows 10/11.

  1. Open this free backup program and select “System Backup” from the ” Backup ” drop-down menu on the main page.
  2. It’s worth noting that if you wish to back up your entire drive, you may select “Disk Backup” as an alternative.
  3. Any place (folder) that Windows identifies can be used as a backup destination, such as an external hard drive, a NAS network location, local storage, and so on.
  4. Following that, click ” Start Backup ” to begin the backup process.
  5. However, if you have more complex requirements, such as those listed below, higher versions such as Professional may be more appropriate.
  6. USB plug-in: This function is intended for people who often use USB storage devices, and it makes the backup work more convenient for those individuals.
  7. Scheme:This is an essential feature for all users who don’t want to miss any updates but are concerned about running out of disk space at the same time.
  8. The backup will be produced in a short period of time.
  9. Having a backup is really important.

As an added bonus, AOMEI Backupper allows you to establish a specific recovery environment for backup and restoration purposes without having to boot into Windows. It’s as simple as going to ToolsRecovery Environment and turning it on.

Wrapping things up

It is certainly possible to reinstall Windows 10 without losing data using the three ways described above, and it may also be used to resolve system issues that your machine may be experiencing. However, it is not without flaws, to be honest. And it goes without saying that restoring from a backup is the most handy and straightforward method of resolving Windows difficulties. The basic version of AOMEI Backupper Standard is sufficient for preventing unforeseen disasters such as system crash, disk failure, virus infection, fire, and so on and so forth.

The AOMEI Backupper Technicianis a good option if you want to safeguard an infinite number of computers inside your organization.

More than that, you have the option of creating a portable AOMEI Backupper that can be run from a removable storage device on any computer.

Leave a Comment

Your email address will not be published. Required fields are marked *