- 1 How to Install Windows 10 on Your PC
- 2 How to Get a Windows 10 License
- 3 How to Upgrade to Windows 10 from Windows 7 or 8
- 4 How to Get Installation Media and Do a Clean Install of Windows 10
- 5 How to Reinstall Windows 10 on a PC That Already Has Windows 10
- 6 Install Windows from a USB Flash Drive
- 7 What you need
- 8 Download Windows 10
- 9 How to quickly set up a new gaming PC with Windows 10
- 10 Pick a pair of speedy sticks
- 11 Start with software
- 12 Driver Directions
- 13 Installing Win 10
- 14 How to install Windows 10 on a new PC in a few quick and easy steps
- 15 How to create the Windows 10 installation media
- 16 How to install Windows 10
- 17 How to install Windows 10 on a new PC using a USB drive
- 18 Minimum System requirements
- 19 How to prepare your Windows 10 files for Installation
- 20 How to install Windows 10 using USB drive
- 21 Build Your Own PC: How to install Windows 10 and setup your PC
- 22 Creating the Installation Media Disk
- 23 Windows 10 Installation
- 24 Connect to your Network
- 25 Conclusion
- 26 How to Download Windows 10 for Free
- 27 Product keys and digital licenses
- 28 How to download the Windows 10 Media Creation tool
- 29 Other methods for getting Windows 10
- 30 Upgrade from Windows 7
- 31 Download Windows 10 without activating
- 32 Buy a third-party Windows 10 key
How to Install Windows 10 on Your PC
The process of installing Windows 10 on your computer is similar whether you’re upgrading from Windows 7 or 8, installing a new operating system from scratch, or reinstalling an older version of the operating system on your computer. A free Windows 10 upgrade license is still available, and there are still methods to obtain one.
How to Get a Windows 10 License
IN CONNECTION WITH: All the Ways You Can Still Get a Free Upgrade to Windows 10 There are a number of different methods to obtain a Windows 10 license for your computer, and many of them are still completely free.
- Upgrade from Windows 7 or 8: Microsoft is still offering a free Windows 10 upgrade to PC customers who make use of accessibility capabilities on their computers. Also still available is the option of installing Windows 10, then entering a valid Windows 7 or 8 product key in the installer to acquire a free Windows 10 upgrade license. Once you’ve completed the upgrade once, your computer will have a perpetual Windows 10 license. As a result, if you upgraded to Windows 10 when it was first introduced and then reduced shortly thereafter, you are still eligible to receive a free upgrade to Windows 10. Microsoft’s servers maintain the licensing information connected with your computer. Purchase a new PC that comes pre-installed with Windows 10: If your computer was pre-installed with Windows 10, it is likely to have a licensing key built in its UEFI firmware. The license was purchased by the manufacturer, and you may reinstall Windows 10 on the computer without having to enter the key. The key for Windows 10 will be obtained from a chip on the motherboard by the installer. Obtain a Windows 10 license by following the steps outlined below: In the same way that you could acquire a license for prior versions of Windows, if you’re constructing your own PC and don’t yet have an operating system, you may do so with Windows 10. Do not purchase a license: You may also install Windows 10 without the need to enter a license key. Despite the fact that you’ll encounter alerts stating that your Windows 10 system is not licensed and has to be activated, the machine will still be fully functional. The Store inside Windows 10 allows you to acquire a valid Windows 10 license, which will transform your computer into a legally licensed Windows 10 PC. Without initially purchasing Windows 10, this is a quick way to test out the operating system on a PC.
Once you’ve determined which approach is going to work best for you, move on to one of the stages below to complete the Windows 10 installation.
How to Upgrade to Windows 10 from Windows 7 or 8
You may still get Windows 10 for free at Microsoft’s Accessibility Site, which is linked above. If you already have Windows 7 or 8.1 installed on your computer, you may use Microsoft’s upgrade program to install Windows 10 on your computer. This will also make it feasible to downgrade and return to Windows 7 or 8.1 once you have completed the update if you do not like what you have seen so far. If you want to take advantage of the Assistive Technologies offer, all you have to do is download the tool from the Assistive Technologies website and follow the wizard instructions.
The deal for Assistive Technologies will be available until December 31, 2017.
Use the Download Windows 10 tool if you’re upgrading to Windows 10 for a different reason, such as if you’ve already updated to Windows 10 on the present PC and it already has a valid license.
The program you choose will download the Windows 10 installation files and start the installation process for you automatically.
How to Get Installation Media and Do a Clean Install of Windows 10
RELATED:The Quick and Easy Way to Perform a Clean Installation of Windows 10 If you don’t want to upgrade from an existing Windows installation, you may get the official Windows 10 installation media from Microsoft for free and do a clean install instead of upgrading from an existing Windows installation. To do so, go to Microsoft’s Download Windows 10 website, select “Download Tool Now,” and then launch the file that has been downloaded. Select “Create installation media for a different PC” from the drop-down menu.
- If you’re installing it on a computer that has a 64-bit processor, you’ll almost certainly want the 64-bit version.
- If you don’t know what sort of CPU your computer has off the top of your head, you can look it up online.
- You will be able to copy the Windows 10 installation files to a USB device or burn them to a DVD with the help of this utility.
- As part of this process, any files stored on the USB device will be permanently deleted.
- When you run the program, it will download an ISO file, which you can then boot into a virtual machine and use to install Windows 10 on the host computer.
- Following the creation of installation media, you will need to insert it into the computer on which you wish to install Windows 10.
- It may be necessary to adjust the boot order in your PC’s BIOS or UEFI firmware to do this.
- To proceed, use the “Next” button.
When you view the Activate Windows page, you’ll be prompted to input a key or choose to bypass it entirely. It is possible that you will not see this box if Windows 10 automatically finds a key connected with the hardware on your PC.
- If this is the first time you’ve installed and activated Windows 10 on this machine, input your Windows 10 activation key here. You can use your valid Windows 7, 8, or 8.1 product key instead if you don’t have one. The option “I don’t have a product key” will appear if you have already taken advantage of the free Windows 10 upgrade offer on this computer. Once Windows is installed, it will automatically activate using a “digital license” connected with your PC’s hardware on Microsoft’s servers
- Once Windows is activated, it will remain active.
Specify your Windows 10 key if you’ve never installed and activated the operating system on this machine before. Even if you don’t have one, but you do have a valid Windows 7, 8, or 8.1 product key, insert it here instead. Please choose “I don’t have a product key” if you have already taken advantage of the free Windows 10 upgrade offer on this computer. Once Windows is installed, it will immediately activate with a “digital license” connected with the hardware of your PC on Microsoft’s servers.
How to Reinstall Windows 10 on a PC That Already Has Windows 10
IN CONNECTION WITH: How to Reinstall Windows 10 Easily Without the Bloatware You may also do a clean install of Windows 10 if you already have the operating system installed on your computer. The Creators Update for Windows 10 makes it much simpler to reinstall the operating system from scratch. You may utilize the “Fresh start” option in Windows Defender to acquire an entirely new Windows 10 system that has been downloaded directly from Microsoft. While the standardRefreshandResetoptions retain any software that your PC manufacturer added, this will completely remove all of that crap and leaving you with a completely fresh Windows 10 machine.
You will not be required to provide a license key throughout this procedure, regardless of whether your PC came pre-loaded with a Windows 10 license or if you already took advantage of the free upgrade offer.
Install Windows from a USB Flash Drive
Continue to the main content This browser is no longer supported by the manufacturer. You may benefit from the newest features, security updates, and technical support by switching to Microsoft Edge from Internet Explorer.
Please rate your experience
The information you provide will be forwarded to Microsoft: By clicking the submit button, your input will be used to improve Microsoft products and services in the future. Policy on personal information. Thank you very much.
In this article
How to manually produce a Windows installation USB drive from an ISO disc image file or DVD is covered in this article, which is designed for PC makers that want to develop media that they may utilize to manufacture Windows-based products. Tip The procedures outlined on this page are predicated on the assumption that you have Windows installation disks and access to a Windows technical PC. Look here if you’re seeking for a quick and easy solution to make a bootable USB Windows installation disc using a script.
What you need
- Installation discs for the Windows operating system. It’s possible that this is an installation. ISO or DVD
- A USB flash drive with at least 5GB of empty space
- And other materials. Due to the fact that this disk will be formatted, make certain that it does not contain any vital data. Windows computer used by the technician to format the USB flash drive
- Sometimes known as a technician PC. PC to be used as a destination – A computer on which you will install Windows
Step 1 – Format the drive and set the primary partition as active
- Obtain a USB flash drive and connect it to your technical PC. Disk Management in the Open: Disk Management may be accessed by right-clicking on the Start button. Format the partition by selecting Format from the context menu of the USB device partition. Choose theFAT32file system if you want to be able to boot either BIOS- or UEFI-based computers. Make the partition active by doing the following: Right-click on the USB drive partition and select Mark Partition as Active from the context menu. Note: If the option to Designate Partition as Active is not accessible, you may useiskpart to choose the partition and mark it as active instead.
Step 2 – Copy Windows Setup to the USB flash drive
- Using File Explorer, copy and paste the full contents of the Windows product DVD or ISO onto the USB flash drive, then save the file. Installing an unattend file is optional, but it makes the installation procedure more streamlined. Automate Windows Setup.
Step 3 – Install Windows to the new PC
- Connect the USB flash drive to a brand-new computer
- And After turning on the computer, hit the key that opens the boot-device selection menu for the machine, such as the Esc, F10, or F12 buttons. Choose the option that allows you to boot the computer from a USB flash drive. The Windows Setup program begins. To install Windows, follow the on-screen directions. Remove the USB flash drive from your computer.
If your Windows image is larger than 4GB
A new PC should be connected via USB to the USB flash disk. Upon completing the boot-up process, hit any key that opens the boot-device selection menu for your computer (such as the Esc/F10/F12 keys). To boot the PC from a USB flash drive, select the appropriate option from the menu. Installing Windows starts the Windows Setup procedure. Installing Windows is simple if you follow the directions provided. The USB flash drive should be removed.
- Ensure that everything on the USB device except the Windows image file (sourcesinstall.wim) gets copied over (either drag and drop, or use this command, where D: is the mounted ISO and E: is the USB flash drive.) robocopy The following is the D: E: /s/max:3800000000
- Dividing the Windows picture file into smaller files and transferring the smaller images to the USB flash drive is as follows: /Split-Image /Image /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /Dism /SWM /D:sourcesinstall.wim /File:D:sourcesinstall.wim File:E:sourcesinstall.swm /FileSize:3800 /FileName:install.swm Note Windows Setup will automatically install from this file if you name it install.swm
- Otherwise, you will have to manually install it.
Make a backup of everything on your computer, except for the Windows image file (sourcesinstall.wim) (either drag and drop, or use this command, where D: is the mounted ISO and E: is the USB flash drive.) robocopy The following are the D: E: /s/max:3800000000; D: E: Dividing the Windows picture file into smaller files and transferring the smaller images to the USB flash drive is described below: image dism split image image dism split image dism split image dism split image dism split image dism split image dism split image dism split image dism Install.wim (D:/sources/install.wim /SWM) is located in the directory D:/sources.
/FileSize:3800 /FileName:E:sourcesinstall.swm Note If you save the file with the name install.swm, Windows Setup will use it to install itself.
Download Windows 10
As soon as you download an ISO file for Windows 10, the file is automatically installed on your computer in the location that you specify. In the event that you have a software for the creation of bootable DVDs on your computer and you want to use it for the creation of an installation DVD, you can launch that application by going to the location of the ISO-file and double-clicking on the file. You may also select your favorite DVD brander by pressing the right mouse button on the folder icon and selecting Open with the left mouse button.
- SelecteerEigenschappen using the right mouse button after locating the ISO-file with the left mouse button.
- Wijzigenen selects Windows Explorer in order to open ISO-files and then selects the nextToepassen option.
- If you want to install Windows 10 directly from the ISO-file without having to use a DVD or flashstation, you may do so by connecting the ISO-file to a computer with a USB drive.
- Koppelen von ISO-Dateien:
- As soon as you download an ISO file for Windows 10, the file is placed on your computer in the location that you specify. In the event that you have a software for the creation of bootable DVDs on your computer and you want to use it for the creation of an installation DVD, you may launch that application by going to the location of the ISO-file and clicking twice on the file. You may also select your favorite DVD brander by using the right mouse button on the corresponding folder icon and selecting Open. As soon as you decide to use the Windows-helpprogramma for the creation of DVD installation media, navigate to the location where the ISO-file has been saved to create an installatie-dvd. SelecteerEigenschappen by using the right mouse button on the ISO-file. To access the general tab, choose it from the drop-down menu. In order to open ISO-files, Wijzigenen selects Windows Explorer, and then selects the nextToepassen option. Select BrandenSchijfkopiebestandbranden from the drop-down menu after clicking on the ISO-file following that. In the event that you wish to install Windows 10 directly from the ISO-file without the need for a DVD or flash drive, you may accomplish this by connecting the ISO-file to a computer. In this case, your current besturingssystem will be converted to work with Windows 10 (if applicable). How to bind an ISO-database:
How to quickly set up a new gaming PC with Windows 10
If you haven’t installed Windows in a while, you might recall it as a time-consuming and irritating experience. However, things have changed since the days of the optical drive, and installing Windows 10 is now more faster and more seamless than it was even with Windows 7 previously. With a little planning and a couple of flash drives, you can be up and running with a fresh operating system on your new equipment in less than an hour after pressing the install button. Find out how to install Windows 10 on a new gaming computer in the shortest amount of time!
Fast disks with 16 GB or more of storage space will make your installation process easier.
Pick a pair of speedy sticks
Installing using a USB flash drive is the best option because they are small and convenient. Choose two USB 3 devices and make sure they are the quickest you can find. It makes a significant impact throughout the installation process. It’s also a good idea to go for greater storage capacities, at the very least 16 GB. While the operating system files themselves do not take up much space, there will be other vital uses for those extra gigabytes before the installation process is complete and the system is ready to use.
The 32GB version of our preferred flash drive is inexpensive, and you can buy even more affordable budget drives that are still more than capable of doing the required tasks.
Start with software
Installing using a USB flash drive is the best option because they are small and lightweight. Choose two USB 3 devices and make sure they are the quickest available. The change is noticeable during the installation process. Aiming for greater storage capacities, at the very least 16 GB, is a good idea as well. While the operating system files itself do not take up much space, the free gigabytes that remain after installation will be put to good use. It is inexpensive to get a 32GB version of our preferred flash drive, and it is possible to locate even more affordable budget drives that are still enough for the purpose.
The first thing you should do with that extra space is create a folder that contains all of the drivers for your motherboard, graphics card, and whatever other components you have installed, as well as a few useful applications that you should have on hand at all times. Avoid using any drivers that came with your device and instead download the most recent version available from the manufacturer’s website. If you don’t, you may wind up having to reinstall them from scratch. The software that is pre-installed on the majority of computer hardware is often out of date by the time it leaves the factory.
- Keep in mind that the operating system is only half of the battle.
- Navigate to the manufacturer’s website and locate the product support page for your hardware and operating system, then download all of the necessary files for your system from there.
- Folders with names such as APRP Win7-8-8-1 V10028 aren’t particularly useful when trying to find something.
- Many manufacturers provide optional, bloated versions of their drivers, third-party utilities, and other extras that aren’t essential for operation and that might occasionally create problems with their products.
- Take a look at our advice on the first programs you should install on your brand new computer.
- We propose combining them all together withNinite, which makes setting up the fundamentals on a new machine really simple and straightforward.
Typical of Windows, there will be more space dedicated to drivers, utilities, and updates over time than there will be to the operating system itself. One of the benefits of prepping ahead of time is having all of this information at your fingertips during the initial installation.
Installing Win 10
Now that your high-capacity flash drive is brimming with Windows 10 deliciousness, it’s time to start the installation process. Don’t be concerned, it will not take long. Connect the disk to a USB 3 connection on your computer and restart it. If you press the Delete key, you should see a command that allows you to choose which drive to boot from. Press and hold it to bring up the boot menu, and then choose your USB flash drive from the list to begin loading the Windows installer software. Choose your language, then click Next to begin the installation process.
- If you’d prefer to do it later, you may enter it now or click Skip.
- The type of installation is the next item on the list.
- Custom will be your system of choice for a fresh installation.
- In the vast majority of circumstances, it’s ideal to start with unallocated space on a bare disk and let Windows handle the partitioning during the installation process.
- The progress of the installation will be displayed on the status screen.
- Usually, a tour such as this one, which guides you through the diskpart software, will suffice to resolve the issue.
- Our recommendation: turn off Cortanaso so you don’t have to listen to it.
A series of pages will appear, prompting you to select your region, keyboard layout, and Microsoft ID (which you can then use to sync settings and data between Windows PCs), or you may choose to ignore them and simply create a local login for your computer.
Because many customers were outraged by the lack of openness surrounding data consumption in the Windows 10 launch edition, there are now a plethora of alternatives available to them.
There is minimal benefit to be gained from disclosing this information to Microsoft or to anyone on your contact list.
It is now time to take the final step.
If Windows 10 done its work correctly, you won’t have to worry about installing any drivers for your ethernet or Wi-Fi connection.
After a few clicks and a few of reboots, you’ll be finished up.
Use the built-in Windows System Image Tool, which is buried away in the File History settings, to back-up your new operating system install to a flash drive as a precaution during the final stages, so that the next time you install Windows 10, it will only take 10 minutes instead of 45.
Otherwise, you’re good to go with your gaming. Check to see that you have the most recent Nvidia or AMD drivers loaded, then download Steam and start queueing up some titles to play! The following instructions will provide you with further information on how to get started with your new gaming PC.
- The installation of Windows 10 has begun now that your fast USB flash drive has been loaded with the operating system. Don’t be concerned
- It won’t take long at all! Connect the disk to a USB 3 connection on your computer’s motherboard and reboot the computer. If you press the Delete key, you should see a command that allows you to choose which drive you want to boot from. Press and hold it to bring up the boot menu, and then choose your USB flash drive from the list to run the Windows installer program on the computer. Start the installation by selecting your language and pressing Next. Then you’ll be asked for your Product Key, which you may enter below. If you want to complete this later, enter it or click Skip. When installing without the product key, keep in mind that you will be operating an unactivated version of Windows, and several functionality will be blocked until you enter the product key. Installation method is the next item on the list. You have two options: either install over an existing version of Windows and maintain your settings, or perform a clean install using the Custom option (which is recommended). Custom will be your selection for a new system. There are a variety of drive utilities available to assist you, including the ability to delete, format, and create extended partitions. You’ll need to choose the destination drive where Windows 10 will be installed. Generally, it’s preferable to start with unallocated space on a bare disk and let Windows handle partitioning while you’re installing the operating system. The first installation of Windows 10 will be completed once you’ve picked the drive and the progress will be displayed on the status screen. Note on errors: The “We couldn’t create a new partition error” on an SSD or hard drive is the most prevalent issue we’ve seen while installing Windows. A tour such as this one, which guides you through the diskpart software, is usually sufficient to resolve this issue. You’ll be confronted with a settings configuration procedure that makes use of Cortana, Microsoft’s artificial intelligence assistant. Our recommendation: turn down the volume on Cortanaso so you don’t have to hear him. Leaving the sound on, however, will provide voice direction if desired. A series of pages will appear, prompting you to select your region, keyboard layout, and Microsoft ID (which you can then use to sync settings and data between Windows PCs), or you may choose to ignore them and simply create a local login for your PC. It will be necessary to configure your privacy settings after creating a login and password. Because many customers were outraged by the lack of openness surrounding data consumption in the Windows 10 launch edition, there are now a variety of choices. If you don’t have a special reason to leave any of these settings turned on, my advice is to turn them all off. Sharing this information with Microsoft or other persons on your contact list will provide you with minimal benefit. When you have finished customizing your programs and preferences, the machine will boot to the new Windows 10 desktop. We have reached the conclusion of this procedure. Copy the driver folder from the USB flash drive to your local disk and make a note of the location of the drivers. If Windows 10 does its job correctly, you won’t have to worry about installing any drivers for your ethernet or Wi-Fi network. For those who have a need or desire to manually install the drivers, walk through your installation folder starting with the applications for your motherboard and progressing to additional utilities and software necessities such as Chrome or Firefox, Steam, and so on. You’ll be finished in a few clicks and a couple of reboots. The Windows 10 operating system is now available. Use the built-in Windows System Image Tool, which is buried away in the File History settings, to back-up your new operating system install to a flash drive as a precaution during the final stages, so that the next time you install Windows 10, it will only take 10 minutes rather than 45. You’ll be OK if you don’t do something stupid. Verify that you have the most recent Nvidia or AMD drivers loaded, then download Steam and get some games started! Check out the following instructions for additional information on getting started with your new gaming PC:
How to install Windows 10 on a new PC in a few quick and easy steps
If you’ve built a new computer or purchased one that doesn’t come with an operating system, you might be curious about the steps involved in installing Windows on it. Fortunately, the process of installing Windows has gotten increasingly simple over time. Access to a USB flash drive as well as a Windows computer with an internet connection are all that are required. It is recommended that you obtain a Windows 10 USB drive from Microsoft if you do not already have either of these two items. In this post, we’ll show you how to make a bootable Windows 10 USB drive and how to use it to install the operating system on a new computer or laptop.
Aside from that, if you’re interested in running Windows 10 on an Apple Silicon Mac, we have a tutorial for you as well.
You’ll need a USB device with at least 8GB of storage capacity to complete this task.
How to create the Windows 10 installation media
It is possible to skip these steps and go right to theHow to install Windows 10section if you already have a USB installation disc with the Windows 10 operating system on it.
- By visiting the Microsoft website, you may obtain the official program for creating Windows 10 installation discs. Installing Windows 10 requires you to run an utility to prepare the installation media. You’ll be presented with two options: “Create installation media for another PC.” or “Create installation media for another PC.”
- Make a selection of the Windows 10 edition, language, and architecture that you wish to install
- After that, you’ll be asked if you want to utilize a USB flash drive or produce an ISO file. Select “USB flash drive” from the drop-down menu.
- Wait for the utility to complete the copying of the Windows 10 installation files before proceeding. It may take some time, depending on your internet connection speed. After the procedure is completed, you will be able to begin installing Windows 10 on your new computer.
How to install Windows 10
- Insert the Windows 10 installation USB drive into your new computer and turn it on to begin the installation. The boot order in your computer’s UEFI/ BIOS settings must be modified if your computer does not automatically boot to the USB drive when you plug it in. If you want to access these options, you’ll need to hit the manufacturer key immediately after the machine has booted up. Typically, one of the following keys will be pressed: Esc, Delete, F1, F2, F10, F11, or F12. You may either search online for the correct key for your computer, or carefully examine the initial boot screen to determine which one it is. Details on how to access the UEFI/ BIOS settings will be included in the literature that came with your computer or your motherboard (if you built it yourself).
- Once you have accessed the UEFI/ BIOS settings, browse to the boot area and adjust the order of the boot selections so that your installation USB drive is at the very top of the list. Now save the changes and quit the program. Your machine will now automatically start up using the modified boot sequence, and the Windows 10 setup will begin to run on your behalf. Some systems, depending on the motherboard manufacturer, may enable you to pick the boot sequence without having to navigate through the UEFI/ BIOS settings
- However, this is not always the case. Once in the Windows setup, choose your language, time and currency format, as well as your keyboard configuration. To proceed, click on the ‘Next’ button.
- To begin the actual installation, click on the button labeled ‘Install Now.’ Windows Setup will next prompt you to activate Windows by inputting a product key. Alternatively, if you’ve already purchased Windows 10, input the product key
- Otherwise, choose “I don’t have a product key” to proceed. After the installation is complete, you may activate Windows. However, if you do not give a product key, the setup will prompt you to select which version of Windows 10 you would want to install. Choose the one you intend to purchase because you will not be able to change your mind afterwards
- In the following stage, the installer will ask you to select the type of installation you want – Upgrade or Custom – and then proceed to the next phase. Due to the fact that this is the first time you are installing Windows on this machine, select ‘Custom’ and then press ‘Next’ to proceed
- On the following page, you’ll be prompted to pick the hard disk on which you’d want to install Windows. The vast majority of individuals who visit this site will only have one hard drive, however if your computer has two hard drives, choose the one on which you want Windows installed. If you have many hard drives, the rule of thumb is to choose the one that is speedier. At this point, you have the option of creating numerous disk partitions on your computer if you so choose. Even if you wind up having to create many partitions, choose the one on which you wish to install Windows and then click on the ‘Next’ button to proceed.
- Windows 10 will now automatically install on your computer. It is possible that it will restart several times. In the meanwhile, it will prompt you to make some changes to your settings. Choose the one that is most appropriate for you.
- Your computer will reboot when the installation process is complete. Remove the installation USB from your computer and you’re ready to go
Here’s a simple tutorial to assist you with setting up Windows 10 on your new computer. If you’re intending on messing about with the firmware on your Android phone, make sure to read our instruction on how to install ADB on your Windows PC first. Please also have a look at our best recommendations from among the laptops that use Windows Hello face recognition technology. In the comments area, please share your thoughts and experiences if you followed this instructions to install Windows 10 on your computer.
How to install Windows 10 on a new PC using a USB drive
Here’s a fast method to getting Windows 10 installed on your new computer. When intending to meddle with the firmware of your Android phone, be sure to read our instruction on installing ADB on a Windows computer first. Please also have a look at our best recommendations from among the laptops that include Windows Hello face recognition technology, which you can find here. In the comments area, please share your thoughts and experiences if you utilized this instruction to install Windows 10 on your PC.
Minimum System requirements
It is not necessary to have access to a powerful machine in order to run Windows 10 on your PC in order to get it installed and functioning. As far as the processor is concerned, you will want a computer with a 1 GHz or higher processor to complete the task. If you intend to install the 32-bit version of Windows 10, you will require at least 1 GB of free space on your hard drive. For the 64-bit version of Windows 10, on the other hand, you will want 2 GB of available memory. As with the 32-bit version of Windows 10, you will want 16 GB or more free space on your hard drive, and at least 20 GB free space on your hard drive for the 64-bit version of Windows 10.
In terms of resolution, your display should be capable of supporting at least 800600 pixels.
Note:While Windows 10 is free to download and install, you will need to pay for an activation key in order to use all of its features once it has been successfully installed.
How to prepare your Windows 10 files for Installation
You’ll need a Windows PC that’s connected to the internet in order to set up your Windows installation files. 1. Connect the USB drive (with at least 8GB of RAM) to your computer once it has been done. 2. Open a web browser and navigate to the Download Windows 10 page. 3. Select the “Create Windows 10 installation media” option from the drop-down menu. 4. Select “Download tool now” from the drop-down menu. 5. Once the Windows 10 files have been downloaded to your computer, open the program and agree to the licensing agreement that appears.
- The USB disk will be automatically discovered and selected by Windows 11.
- The files will be transferred to the USB flash device that you have connected.
- Insert the USB device with the Windows installation files into the machine on which you wish to install Windows.
How to install Windows 10 using USB drive
You will need to modify the boot order of the computer in order for it to recognize the USB device. 1. Turn on your computer and click the appropriate key to activate the UEFI or BIOS controls at startup — this is often accomplished by pressing F1, F2, Escape, or Delete as soon as the machine begins. 2. Once the starting menu opens, navigate to the “boot” control menu and verify that your computer is configured to boot from a USB flash drive. Then save the UEFI/BIOS file and leave the program.
When the computer resumes, the USB drive will be used to boot the machine.
Please keep in mind that you will require a license key in order to finish the Windows 10 installation.
Build Your Own PC: How to install Windows 10 and setup your PC
Welcome to the fifth installment of the “Build Your Own PC” series, which features AMD Ryzen and Radeon processors and graphics cards. In this post, we’ll go over how to install Windows 10 as well as all of the necessary drivers for your computer. When you build your first PC, you’re likely to run into a common installation issue. We’ll walk you through the entire process of setting up your computer correctly.
Creating the Installation Media Disk
We’ll be installing Windows 10 using a bootable USB drive, which will be provided. It is necessary to have an existing PC running Windows or Linux in order to produce a USB drive with the installation disc for the installation software. If you don’t have access to a second computer, you may always create a bootable USB drive at a friend’s or neighbor’s house. This technique will necessitate the use of an 8GB USB flash disk. Connect your USB flash drive to your friend’s computer and search for the Windows Media Creation Tool on the internet to download.
- Select “Create Windows 10 installation media” from the “Create Windows 10 installation media” section and then click on the “Download tool now” option.
- When you run the program, it will connect to the internet in order to obtain the most up-to-date information from Microsoft’s servers.
- Accept the terms of the Agreement.
- Select the latter option and go to the next step.
- For the 64-bit Architecture, we prefer to use the English (US) edition of Windows 10 in the English (US) language.
- On the following page, you will be given the choice of either preparing a USB stick or downloading the ISO file separately from the website.
- To proceed, click on the Next button.
- The contents of this USB Flash drive will be erased when you move to the next step, so please make sure you choose the proper USB drive before moving on.
- Select Next from the drop-down menu.
It will also enable you to boot from the USB drive, which is required if you want to use the Flash Drive to install Windows on your computer. Upon completion of the process, you may remove the flash drive and insert it into your freshly constructed desktop computer.
Windows 10 Installation
In this section, we’ll assume that your computer successfully boots into BIOS after you’ve completed the procedures in the previous article. All current-generation motherboards will come with the proper choices pre-selected in the BIOS by default. However, it is always a good idea to look through these areas with a critical eye. Enter your BIOS by pressing the DELETE key on your keyboard immediately after turning on your computer. Upon entering the BIOS, navigate to the Storage section to ensure that all of your SATA / NVMe slots are configured to use AHCI technology.
- This implies that every single SSD, hard disk, and network will be examined to see whether the operating system is there, and it will boot the operating system that has the greatest boot priority on the list of available options.
- If everything has appeared to be normal up to this point.
- Your computer will boot up once or twice and then look for the operating system to install on it.
- This will immediately start the Windows 10 installation process.
- When determining the boot menu shortcut key for your system, you should consult the motherboard documentation for assistance.
- Once you’ve reached the boot menu, pick the “UEFI: USB XXXX” option from the list.
- Things have gotten far easier over the previous decade, and installing an operating system is now a very straightforward process.
To begin, click on the Install Now button.
If this is not the case, you may always complete this step after Windows 10 has been installed.
Some software has been deleted from the versions denoted by the letter N for legal concerns.
The cost for these varies, with Home being the least expensive and Pro being the most expensive of the bunch, so keep track of which one you chose when you want to purchase a key later on.
“Custom: Install Windows Only” should be selected in the next dialog.
You will be given with a list of all of the disk drives that may be utilized for Windows 10 installation in the following window.
The storage disks are placed in a sequential fashion, with labels that read Drive 0, Drive 1, Drive 2, and so on and so forth.
Select it and press the “New” button.
You should only see one entry for “Drive 0 Unallocated Space,” or two entries if you have two storage drives attached, under ideal circumstances.
If your SSD has a capacity of 240/250/256 GB, then make full use of it.
You may now proceed with the creation of a new partition by selecting it and continuing.
Windows will now begin the installation process and begin transferring all of the files.
The boot menu choice does not need to be selected a second time since Windows will take care of it for you.
On the following screen, you will see the “Basics” window, which will ask you to select the region in which you want to be based.
The next step is to choose a keyboard layout.
When you touch the next button, you will be able to select various keyboard layouts.
The Network screen is the next screen to appear.
We recommend not to do this during the setup process since Windows attempts to download more files during the setup process, and if your network speed is slow, this may cause your setup to take an extremely lengthy period of time to complete.
Enter the name of the individual or organization who will be utilizing your new computer and then click on the next button.
The next page is Cortana, where you can choose whether or not to enable Cortana to gather your personal information in order to deliver a more personalized experience, or you may choose to use the default settings.
The next screen is similarly concerned about your privacy. We would want to turn off all of the options. To proceed, click on the next button. Your operating system configuration will take a few more minutes before rebooting. You have now completed the installation of Windows 10 on your computer.
Connect to your Network
Having successfully installed Windows 10, you may connect to the Internet via an ethernet connection or connect to Wi-Fi, depending on if your motherboard has that capability. Attention: If you connect the PC to the internet at this point, it will begin downloading drivers from Microsoft’s servers without your intervention. The majority of hardware makers collaborate with Microsoft to ensure that their drivers are automatically distributed through the Windows Update service. Additionally, you may start Windows Update by going to the Start menu and entering Windows Update, followed by selecting the service from the list.
- It is possible that the drivers saved on Microsoft’s servers are not the most recent versions.
- Select Windows 10 64bit as the operating system on the motherboard’s support page, and it will display all of the drivers available for your PC.
- The AMD APU VGA drivers are only required if you are utilizing an AMD graphics processor.
- The drivers should be installed in the order shown below.
- During the setup process, Windows will automatically install the LAN, Audio, and Storage drivers, so you are only responsible for updating those drivers to the most recent versions.
- Some drivers are only partially installed before to the restart, and the restart procedure completes the installation of such drivers after the restart.
- It is important to check the device manager to ensure that everything has been successfully installed.
- In the Device Manager, we’ll go through the list of connected gear to check if there are any “Yellow Exclamation marks” that need to be addressed.
- These are normally found under “Other Devices,” and they will be labeled as “Unknown device” when you locate them.
- Your computer has been correctly configured.
Congratulations, you have successfully installed Windows as well as all of the necessary drivers. Your computer has now been correctly configured. This finishes the fifth and last installment of a seven-part series on how to construct your own desktop computer. If you have encountered any difficulties along the road, the following two films should be of assistance. Remember to tag us in your PC-building posts on social media platforms such as Instagram and Twitter. For more information on our ‘Built Your Own PC’ series, please see the links provided below the article title.
2.Building Your Own Computer: Which CPU, GPU, Motherboard, and other components should you purchase?
4.Construct Your Own Computer: Instructions on how to create a computer 5.How to Create Your Own Computer: How to Install Windows 10 and Setup Your Computer (You are here) 6.Construct your own computer and test it for cooling and performance.
7.Constructing Your Own Computer: Common blunders to avoid while constructing a computer
How to Download Windows 10 for Free
When Windows 10 originally became available, obtaining a free upgrade was as simple as selecting the Get Windows 10 notification prompt from the notification bar. Currently, though, things are a little different. Microsoft no longer supports Windows 7, which implies that there will be no more technical support, security updates, or bug-squashing for this operating system going forward. In other words, Windows 7 is now considered risky to use, making it a great time to upgrade to Windows 10 from an earlier version.
Although it may appear that Microsoft’s newest operating system is no longer available, there are still methods to obtain it without having to purchase a new license or breaking any regulations.
Product keys and digital licenses
It is preferable to have a valid product key or digital license in order to qualify for a free update. What’s the difference between the two? An operating system purchased from Microsoft or any other merchant comes with a product key that allows you to unlock the system. It may be printed and included in the packing, emailed to you, or saved in the cloud, as is often the case with system builders and other service professionals.
What is a digital license?
A digital license establishes a connection between your installed Windows platform and a key that is incorporated in prebuilt systems from companies like as Acer, Dell, HP, and others. This group of producers has for a long time printed product keys on labels that were affixed to computers or printed and inserted them into product packaging. Microsoft’s product keys are normally only valid on a single computer, however hackers have discovered ways to utilize the same key on many computers. It was as a result of this that Microsoft and OEMs implemented digital licensing in Windows 8 as an anti-piracy mechanism to ensure that end users would not install the platform on new computers.
This license is tied to your Microsoft account when it is purchased.
What if I can’t find my key?
Whether you’re upgrading from Windows 7 and are unable to locate your product key, you can try logging into your Microsoft account and reviewing your previous downloads to see if your product key is still available. Some websites, such as Amazon, also retain track of paid downloads, although they seldom contain the product key itself, though they may be useful in narrowing down the location of the key. Finally, you may download Windows 10 and execute a fresh installation of the operating system.
Other than that, you must provide an original, genuine product key during the setup process, or you may do it later by visiting SettingsUpdateSecurityActivation (see below).
It is necessary to follow our previous instruction on how to upgrade from Windows 7 to Windows 10. If you do not have a valid Windows 7 license key, you must follow this guide. Arif Bacchus of Digital Trends has contributed to this article.
How to download the Windows 10 Media Creation tool
Despite the fact that Microsoft officially ended the free update campaign in mid-2016, the company secretly continues to make this option available so that all Windows PC customers may run the most recent version. A new Windows 10 Home product key will need to be purchased if you do not already have an active digital license or product key that qualifies you for the free upgrade, as previously stated. Step 1: The first step in obtaining a free Windows 10 update is to go to the Microsoft Download Windows 10 homepage.
- When MediaCreationTool21H1.exe is downloaded into your computer, it should take no more than a minute to complete the process.
- Activate the Media Creation Tool in the third step.
- As previously stated, you have two options: either upgrade the current PC or make installation discs that can be used to either update another PC or conduct a clean install on the current PC.
- Step 5:Click on theUpgrade This PC Nowbutton and follow the on-screen instructions.
- Remove apps from your computer if necessary to satisfy the installer’s concerns.
- Take note of the significant difference between Windows 7 and Windows 10 in terms of the software that you will be using.
- We cannot guarantee that all files and applications will be compatible with Windows 10, and some may cease to function as a result of this.
- Before you proceed, make a copy of or convert any important data.
- It is necessary to restart your computer several times while the installation process advances.
- If you are required for a valid product key, input it now or later by going toSettingsUpdateSecurityActivation on your computer.
- Step 10:In addition, you’ll obtain the same flavor of Windows that came pre-installed on your computer – Home, Pro, Enterprise, or Educational.
Purchasing a new product key is required if you choose to utilize Windows 10 Pro rather than the Windows 10 Home upgrade. Arif Bacchus of Digital Trends has contributed to this article.
Other methods for getting Windows 10
For the time being, the procedure outlined above is the most effective way to obtain a free copy of Windows 10. It is possible to obtain Windows 10 in alternative ways if you want it, including free and low-cost alternatives that may be worth investigating.
Upgrade from Windows 7
Purchase a copy of Windows 10 from the Microsoft Store. Please refer to our tutorial on how to upgrade from Windows 7 to Windows 10 for further information.
Download Windows 10 without activating
Technically, you may download Windows 10 from Microsoft and not activate it, which means you won’t have to pay anything for the operating system. It turns out that technique is more secure than it appears since Microsoft is sloppy about enforcing activation requirements. Your copy of Windows should not shut down, however there are several restrictions that apply after the 30-day trial period:
- On the technical side, you may get Windows 10 from Microsoft without activating it, which means you won’t have to pay for it. Because Microsoft is negligent in enforcing activation, it turns out that this is a safer option than it appears. After the 30-day trial period, your copy of Windows should not shut down, but some restrictions will apply:
However, we want to emphasize that using an unactivated version of Windows 10 is strictly prohibited by Microsoft. Despite the fact that it appears to be a good deal (and it does sound about right), you are in fact breaking the rules and violating Microsoft’s license agreement by doing so. Microsoft would be perfectly within its rights to pursue legal action against anyone who is found to be using the Windows 10 operating system without having activated it, albeit they have not done so as far as we are aware.
Ultimately, if Microsoft desired to prevent users from utilizing these versions, they had the ability to do so.
Buy a third-party Windows 10 key
Third-party merchants who offer Windows 10 manufacturer keys at a discount may be found on the internet. By purchasing the keys through one of these firms, you may save 50% (or perhaps more) off the full Microsoft retail price for the keys. While it may appear to be a scam, it is possible to locate reputable suppliers who also happen to be offering a competitive price; nonetheless, you must be vigilant. What buyers need to do is look for reputable key vendors that are willing to give exceptional discounts.
PCDestination offers these for $45, and they are in stock.
- Manufacturer keys for Windows 10 can be purchased at a discount from third-party suppliers. It is possible to get Microsoft product keys for half (or even less) of the full retail price if you go through one of these companies. If you look hard enough, you can find trustworthy sellers who also happen to be offering an attractive price. However, you must exercise caution and remain vigilant at all times. Customers should look for reputable main providers that are willing to give great discounts. The reality, however, is that it is easier said than done. For $45, you can get one at PCDestination. However, in general, we recommend that you do your research.