How To Download Windows 10 To Usb

Contents

Create installation media for Windows

Installing a new copy of Windows, doing a clean installation, or reinstalling Windows may all be accomplished with installation media (a USB flash drive or DVD). If you need help creating installation discs, go to the program download website, where you’ll find detailed instructions on how to do so. There, you may choose a Windows version and generate your own installation media, which can be either a USB flash drive or a DVD, according to your preferences. For a direct connection to one of the versions, click on one of the following links:

  • The following operating systems are supported: Windows 7
  • Windows 8.1
  • Windows 10(Then selectDownload tool now. )
  • Windows 11(Then selectDownload tool now. )

Here’s what you’ll need to get started on creating the installation media:

  • A computer with a dependable internet connection is required. The amount of time it takes to download will vary depending on your internet connection. A USB flash drive or a DVD is required. A blank USB flash drive with at least 8 GB of storage capacity, or a blank DVD is required for this project (and DVD burner). We recommend that you use a blank USB drive or blank DVD since any data stored on them will be erased. If you are attempting to burn a DVD from an ISO file and are informed that the disc image file is too big, you will need to use dual layer (DL) DVD media
  • Otherwise, you will need to use single layer (SL) DVD media. A product key is required. Your product key is a 25-character string (not required for digital licenses). For assistance in locating it, see Find your Windows product key.

The installation DVD can then be used to reset or reinstall Windows after it has been prepared. Windows recovery options.

How to Install Windows 10 From a Bootable USB Drive

Do you need to reinstall Windows from the beginning? A USB flash drive may be used to boot up Windows 10 (as well as Windows 7 and XP). With just a few clicks, you may have a whole new version of Windows installed on your desktop computer, laptop, or media center. Learn all you need to know about installing a new copy of Windows 10 from a bootable USB stick in this comprehensive guide.

Why Boot a Windows Installation From USB?

The use of a bootable USB stick is great if your spare PC does not have an optical drive or if you have run out of DVDs to use on it. After all, a USB stick is small and portable, and you can be confident that it will work with virtually any desktop or laptop computer. While some computers may be lacking a DVD drive, all PCs are equipped with a USB connector. It is also more expedient to install Windows 10 using a USB flash drive. A USB drive may be made bootable much more quickly than an optical drive, and it can also be used to install the operating system much more quickly than an optical drive.

Before you begin, check to see that your USB flash drive has been properly formatted.

Ensuring USB Stick Has UEFI Boot Support

To understand the difference between UEFI and BIOS before downloading a bootable Windows installation image, it’s vital to first understand what they are. Computers that are more than a decade old rely on the basic input/output system (BIOS) to boot up and handle data between the operating system and peripheral devices. For the past decade, UEFI (Unified Extensible Firmware Interface) has taken the place of BIOS, while also extending compatibility for legacy hardware. When it comes to PC diagnostics and repair, UEFI can aid without the need for extra software or media.

In other words, whatever solution you select should be compatible with your gear.

Preparing the Windows 10 Bootable USB

In order to begin, you must first enter your formatted USB flash drive into your computer or laptop. Are you prepared to install Windows 10? Even though there are other options, the Windows 10 Media Creation Tool is the quickest and most straightforward technique. To obtain this, navigate to theMicrosoft Download Windows 10 website and click on theDownload tool now button.

Download and save the utility to your computer’s hard drive. It’s just about 20MB, so it shouldn’t take too long if you have a fast internet connection. It is important to note that the construction of the bootable Windows 10 USB installer requires an online connection to be successful.

Create a Bootable USB Installer for Windows 10

Once the media production tool has been downloaded, activate it and select Accept when requested. Then:

  1. Install software on another computer via creating installation media (USB flash drive(s), DVD(s), or ISO file(s). Next, select your favorite language from the drop-down menu. Make sure you have the right Windows 10Edition and systemArchitecture installed. To make modifications, uncheck the option labeled Make use of the suggested settings for this computer
  2. HitNext
  3. ChooseUSB flash drive, then Next, and then choose the USB drive from the list that is displayed. ClickNextagain

After completing this final step, the Windows 10 installation files will be downloaded. Wait for the bootable USB Windows 10 installer to be built before continuing. The length of time it takes will be determined on your internet connection speed. It is planned to install many gigabytes of data. Using a library or your place of employment as a download location if you don’t have a fast internet connection at home is an option.

Installing Windows 10 With a Bootable USB Drive

After you’ve prepared the installation media, you’ll be able to install Windows 10 from a USB drive. Due to the fact that the USB drive is now bootable, you can simply disconnect it from your computer and insert it into the target device. After you’ve started the machine on which you’ll be installing Windows 10, wait for it to recognize the USB drive. If this does not occur, restart the computer, this time using the key that allows you to reach the UEFI/BIOS or boot menu. Check to see that the USB device has been recognized, and then choose it as the primary boot device.

You are now ready to begin the installation of Windows 10, so start the installation procedure.

Please keep in mind that some installation may need to proceed after you log in, so please be patient.

The most recent version of Windows 10 will be installed as a result of this action.

How to Install Windows 7 From a Bootable USB Drive

Is there a point at which you’ve had enough of Windows 10? If you have a valid Windows 7 license, you may also use a bootable USB stick to install the operating system. The procedure is substantially the same, with the exception that you won’t have to worry about UEFI compatibility on older PCs. The fact that Windows 7 is a very lightweight operating system makes it an excellent choice for modern computers. Support for the operating system, on the other hand, will be discontinued in January 2020.

For more information, please see our comprehensive guide on installing Windows 7 using a bootable USB drive.

How to Reinstall and Repair Windows 10 From USB

Following the installation of Windows 10 from the bootable USB drive, you may believe that you may simply re-use the USB drive. While this is OK, it may be preferable to leave it as a dedicated Windows 10 installation and repair drive for the time being. The explanation for this is straightforward. A USB stick may not only be used to install Windows 10, but it can also be used to replace Windows 10 if the disk is damaged.

You may thus rely on the USB stick to reinstall Windows 10 if it is not operating in the manner that you would have expected. Here’s how to use your bootable USB stick to reinstall Windows 10 on your computer:

  1. Turn off the computer that has to be reinstalled
  2. Insert the USB flash drive
  3. Start the computer by pressing the power button. In the meantime, wait for the bootable Windows 10 disk to be identified (you may need to alter the boot order as described above). Configure the Language, Time and Currency Format, and Keyboard to fit your needs, and then click Next. Ignore the Install button and instead select Repair your computer from the drop-down menu. SelectTroubleshoot Reset this computer
  4. There are two alternatives available to you: Keep my files andRemove everything are both options that will result in Windows 10 being reinstalled from the USB stick, one with your files maintained and one without
  5. Both options will result in Windows 10 being restored from the USB stick with your files kept and one without

When you’ve finished reinstalling Windows 10, everything should be back to the way it was before you started.

Keep Your Bootable Windows 10 Installation USB Drive Safe

Making a bootable USB stick for Windows is straightforward:

  1. Format a USB flash drive with a capacity of 16GB (or greater)
  2. Microsoft’s media production tool for Windows 10 is available for download. To download the Windows 10 installation files, use the media creation wizard from the Start menu. Make the installation discs for the software
  3. Eject the USB flash drive from your computer.

The USB boot disk should be kept safe, even if you should expect Windows 10 to be quite trouble-free in terms of computer performance. It’s true that you never know when a hard disk drive may fail or when a partition table will get corrupted. When Windows 10 fails to boot, a variety of repair tools are available on the Windows boot disc that can be employed. Maintain a backup of the boot disk in a convenient location where it may be quickly recovered for troubleshooting or reinstalling Windows at a later time.

  • Having a backup copy of Windows 10 on hand is always a good thing to have.
  • Read on to learn more about the author.
  • He has vast expertise in desktop and software assistance, as well as in writing and editing.
  • Christian Cawley has more to say.

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

How to install Windows 10 onto a new computer using a USB drive

  • Installing Windows 10 is as simple as downloading and saving a copy of the installation files to a USB flash drive. In order to use this method, your USB flash drive must be at least 8GB in size, and it should contain no other data
  • In order to install Windows 10, your computer will require at least a 1 GHz processor, 1 GB of RAM, and 16 GB of hard drive space
  • However, a faster processor and more RAM are recommended. More stories may be found in Insider’s Tech Reference collection
  • Click here.

Previously, installing Windows required burning the necessary files on a CD or DVD. Installing Windows 10 these days is an easy process. A USB flash drive and another computer with internet connection are all you’ll need to complete this task. You’ll need a Windows machine that’s already set up and connected to the internet in order to prepare the Windows installation files for downloading. After that is completed, you will transfer them to the new computer.

Preparing your installation files

1.Place your 8 GB or bigger USB drive into the computer. It is not necessary for the disk to be empty, however any material on the drive will be deleted throughout the setup process. Using a web browser, navigate to the Download Windows 10 page. In that window, scroll down until you see the option to “Create Windows 10 installation media” and click “Download tool now.” To get started, you’ll need to download the Windows 10 setup. Insider3 is a collaboration between Dave Johnson and Insider3. Once the program has been downloaded to your computer, launch it and agree to the terms of the licensing agreement.

  1. 5.
  2. Insider5 is a collaboration between Dave Johnson and Insider5.
  3. If you don’t want the defaults, uncheck the box labeled “Use the recommended choices for this PC” and then select the language, edition, and architecture that you want from the drop-down menu.
  4. Choosing a “USB flash drive” as the media type on the “Choose which media to utilize” screen will complete the process.
  5. Insider7’s Dave Johnson contributed to this report.
  6. If you have more than one CD or DVD inserted in your computer, select the appropriate one and then click on “Next.” If you just have one USB device plugged, you may go to the next step by clicking “Next.” Insider8 is represented by Dave Johnson.

This is going to take some time. When it’s finished, grab the USB drive and insert it into the machine that you wish to use to install Windows. The process of creating a USB device with installation data might take an hour or more. In this article, Dave Johnson/Insider

Installing the files

1.You’ll need to modify the boot sequence of the computer in order for it to identify the USB device. Begin by turning on your computer and hitting the appropriate key to activate the UEFI or BIOS controls at startup – this is often accomplished by pressing F1, F2, Escape, or Delete as soon as the machine is turned on. 2.When the starting menu displays, navigate to the “boot” control panel and verify that your computer is configured to boot from a USB flash drive. 3. Then save the UEFI/BIOS file and leave the program.

  1. Now all you have to do is follow the on-screen directions to install Windows on your computer.
  2. Insider Photographs by Justin Gmoser and Jeremy Dreyfuss 4.
  3. If you don’t have a key yet, you can wait until the files have been installed before entering the key you will need.
  4. Some functionality will be disabled, but the operating system will still be fully functional in its entirety.
  5. Dave Johnson is a musician and songwriter from the United Kingdom.
  6. Dave grew up in New Jersey before joining the Air Force, where he worked as a satellite operator, space operations instructor, and space launch planning specialist.
  7. A photographer who has shot wolves in their natural surroundings, Dave is also a dive instructor and the co-host of many podcasts, all of which can be found on his website.
  8. More:Tech How to Install Windows 10 (Installation Guide) It denotes the presence of an expanding section or menu, as well as the presence of previous and next navigation choices.
  9. Especially for you
You might be interested:  How Do I Know If I Have 32 Or 64 Bit Windows 10

How to create a Windows 10 bootable USB: It’s easier than you think

Keep a USB boot disk on hand in case you need to reinstall Windows 10 on your computer at any point. Photograph by Josh Goldman for CNETT Even though troubleshooting an old and sluggish computer is not a pleasant experience, it is something that you can handle on your own at home. In addition to checking for typical problems, you should also build a bootable USB stick to use during your investigation. I understand what you’re going through. A twinge of fear swept over me the first time I heard the phrase “bootable USB drive.” It’s quite OK for you to do so as well.

You should not be intimidated in any way.

A bootable USB drive for Windows 10 is something that everyone who has a Windowscomputer should perform at some point in their lives.

This is also one of the last items you’ll need to complete your gaming PC setup if you’re doing it yourself. For anyone interested in testing out Windows 11, you may construct a bootable USB drive before the operating system’s official release on Oct. 5.

Get the CNET How To newsletter

Get professional advice on how to use your phone, computer, smart home devices, and other devices. Tuesdays and Thursdays are the days for delivery. With the exception of an empty 8GB USB drive and a Windows PC, you’ll need to set aside at least 30 minutes, and maybe more depending on your internet speed. For those who are interested, it is feasible to construct a Windows 10 boot disk on a Mac, but the procedure is time-consuming and necessitates experience with Terminal, the Mac’s command-line interface.

I just constructed my own gaming machine, and despite my limited familiarity with Terminal, I discovered that utilizing a Windows computer was a safer and more straightforward procedure.

Use Microsoft’s media creation tool

To download the Windows 10 system image (also known as an ISO) and make your bootable USB drive, Microsoft provides a specific program that you can use to complete the process. 1.Go to this page, scroll down to the section titled Create Windows Installation Media, and click on the Download tool now button to begin. To begin, double-click the file named MediaCreationToolxxxxxxxx in your downloads folder to begin the process. In this case, the final four numbers of the file name represent the Windows 10 version number).

  • Choose Create installation media from the small list of possibilities that appears on the screen.
  • 3.
  • Then selectCreate installation media (USB flash drive, DVD, or ISO file) for a different PC and clickNext.
  • Jason Cipriani/CNET contributed this screenshot.
  • You’ll be prompted to choose the language, edition, and architecture that you wish to utilize in the program.
  • You may alter any of the settings by unchecking the box next toUse the suggested options for this PCand selecting an option from the drop-down menu that appears.
  • It’s important to note that, according to Microsoft’s support website, if you want to use this tool to flash a different version of Windows 10, such as Windows 10 Pro (or vice versa), it will be included when you pick Windows 10 as the Edition when you select Windows 10.

Select a USB flash drive from the drop-down menu.

After you’ve made your selections, click Next.

To proceed, click on the Next button.

Jason Cipriani/CNET contributed this screenshot.

Finally, choose the USB drive from the drop-down menu.

Choosing the incorrect drive might have disastrous consequences, since this operation would delete everything on the disk while it is running.

Even though it’ll take some time to finish, Microsoft’s tool will take care of everything else for you.

From there, Microsoft’s tool will take care of the rest for you.

Depending on your internet connection speed, the procedure should take around 30 minutes, give or take.

In the future, if you need to install or reinstall Windows, you may attach the disk to your computer and restart it from the command prompt.

It may be necessary to reboot your computer into its BIOS firmware – this is often accomplished by hitting Esc, F2, or a similar key when the machine is booting up – in order to change the boot drive or “bootmenu” to your flash drive if it does not automatically boot to it.

As soon as you power on your computer, you’ll see a little line of text instructing you on which button to push in order to access the BIOS.

You may also use the media tool to upgrade from Windows 7 to Windows 10, if you follow the steps outlined in the following section.

Following the successful installation of Windows 10, here are some pointers to get you started. If reinstalling Windows 10 seems like a daunting task, follow these steps to troubleshoot and expedite the process.

How to Put Windows 10 on USB (A Full Guide)

If you want to install or repair Windows 10 on a computer, one of the most frequent methods is to utilize a USB stick that has all of the essential files and software. Exactly what this tutorial is about is outlined below. I’ll teach you the quickest and most dependable method of preparing and putting Windows 10 onto a USB flash drive. To install Windows 10 on a USB drive, first download and launch Microsoft’s Media Creation program, which will help you correctly prepare the USB drive. It will prepare the USB drive for the FAT32 file system and perform all of the steps necessary to make it bootable and ready to be used for the Windows 10 installation.

By utilizing a bootable USB device to install Windows, you may reduce the amount of time it takes to complete the process.

Now I’ll walk you through the steps to quickly and simply construct a USB drive that you can use to boot from and install Windows 10 on any computer.

How to put Windows 10 installation files onto a USB

To begin, you’ll need to go to the Microsoft website and download the Windows 10 Media Creation Tool (which is free). Check to be that your USB drive is inserted into a free USB port on your computer’s motherboard before proceeding. If at all possible, avoid using any USB hubs. Make sure you have a backup of your USB device before proceeding with this step to avoid data loss. Everything that is on that page will be permanently deleted. Once the application has finished downloading, you may launch it from there.

Note:I strongly advise you to unplug any USB devices that you have connected to your computer, with the exception of the one on which you want the Windows 10 installation files to be loaded.

1. Accept license terms (if you agree)

Once you have read and agreed to the terms of the software licensing agreement, click on the ‘Accept’ option to proceed with the process.

2. Choose installation type

You should uncheck the box that says ‘Use the recommended choices for this PC’ if you are not presently using the computer that is being used to install your new Windows 10. Then select your preferred language and whether you want a 64-bit or 32-bit operating system (check your target machine’s hardware first), and then click on the ‘Next’ button to proceed.

4. Choose USB flash Drive

Select the ‘USB flash drive’ option from the drop-down menu and press the ‘Next’ button to progress to the next stage.

5. Select your destination drive

Select the destination disk on which you want the installation files to be installed, and then click on the ‘Next’ button to proceed to the next stage in the process.

6. The download and installation will proceed

The Media Creation Tool will download the necessary installation files, prepare them, and copy them to your USB drive using the information you provide. Please be patient as this process will take some time.

7. Completed

The installation of Windows 10 on a bootable USB stick has been completed, and you now have a working installation of Windows 10.

There is no limit to how many PCs you may connect to this USB drive at one time.

Booting from the prepared Windows 10 USB drive

In order to install Windows 10 on your computer, you will need to pick the appropriate boot device in the machine’s BIOS. In the majority of situations, all you have to do is press the F12 key when your computer first powers up and publishes. Some computers feature a full-screen logo with a few key instructions listed somewhere in the bottom right-hand corner. The ‘Pause’ key on the keyboard may work if things are moving too rapidly and you are unable to see the precise key strokes displayed there.

  1. You may unpause it by pressing any other key on your keyboard.
  2. Then, when watching the recorded video, pause it at a point where you can see the keystroke information.
  3. Without doing so, it will continue to boot from the USB device, and you will make no further progress with the installation process, and you will be trapped repeating the same basic first phase of the Windows 10 setup over and over again until the installation is complete.
  4. If nothing goes wrong:

Conclusion

That’s how you receive Windows 10 on a USB stick, which you can then use to install it on any computer you choose. You may utilize it to do a clean installation or to perform various types of repairs. Over the course of time, I have tried a variety of various approaches to accomplishing this goal. Although several of them are necessary, most of them are not required unless you are experiencing issues caused by unconventionalhardwaresetups. Microsoft has attempted to make it as simple as possible for anyone to utilize their tool and get Windows 10 up and running in a short period of time with the least amount of work.

How to Make a Windows 10 USB Using Your Mac – Build a Bootable ISO From Your Mac’s Terminal

DVD drives are no longer included with the majority of new PCs. As a result, installing Windows on a new computer might be a hassle. The good news is that Microsoft has developed a program that allows you to install Windows from a USB storage device (or “thumbdrive” as they are often called). But what if you don’t have access to a second PC for the purpose of configuring the USB storage device in the first instance? In this video, we’ll walk you through the process of setting things up on a Mac.

  • Absolutely everything we’re going to do here is completely legal and sanctioned by Microsoft, and we couldn’t be happier.
  • Unless you have a really old machine, you will almost certainly want the 64-bit version.
  • If you want a Windows version that is not in the English language, or if you require an earlier update version, you should download the ISO image from this page.
  • Although the ISO file is only approximately 5 gigabytes, I recommend that you use a USB drive with at least 16 gigabytes of space.
  • Insert your USB drive into the Mac’s USB port.
  • This may be accomplished using MacOS Spotlight by pressing the and Space bar at the same time, then typing “terminal” and pressing the enter key.
  • In a moment, I’ll tell you exactly what commands to type into your computer.
You might be interested:  How To Check Computer Specs Windows 10

Then put the word “terminal” into the search box and pick Terminal from the drop-down list that appears.

Copy the text that I have highlighted here.

Format your USB device to the Windows FAT32 file system next.

It’s important to note that if your drive wasn’t nameddisk2, you need substitute the name of your drive from step 3 fordisk2.

Run the following command, making sure to use the right disk number for your USB: diskutil eraseDisk MS-DOS “WIN10” GPT /dev/disk2 diskutil eraseDisk MS-DOS “WIN10” After that, you’ll see something like this in the terminal.

Please keep in mind that, depending on your hardware, you may need to use this command instead, which partitions the drive using the MBR format rather than the GPT format.

diskutil eraseDisk MS-DOS “WIN10” MBR /dev/disk2 diskutil eraseDisk MS-DOS “WIN10” We’re going to prepare our downloaded ISO file so that we may copy it to our USB drive later on today.

However, your file is most likely placed in your/Downloadsfolder with the name Win10 1903 V1 English x64.iso.hdiutil mount and is accessible through the command line.

As a result, I’ll demonstrate how to copy it over independently.

Before you begin, execute the following command to copy everything except the install.wim file:rsync -vha -exclude=sources/install.wim /Volumes/CCCOMA X64FRE EN-US DV9/* /Volumes/WIN10 Then use the following line to install Homebrew (assuming you don’t already have it installed on your Mac):/usr/bin/ruby -e “$(curl -fsSL)” to complete the installation.

Then go ahead and create the directory that you’ll be using to store the files you’ve been working on: create a directory called /Volumes/WIN10/sources After that, execute this command.

Don’t get rid of it.

Wimlib-imagex splits the wim file into two files that are less than 4 gigabytes in size (I use 3.8 gigabytes in the following command), and then copies them to your USB drive:wimlib-imagex split /Volumes/CCCOMA X64FRE EN US DV9/sources/install.wim 3800 3800 3800 /Volumes/WIN10/sources/install.swm 3800 Once that is completed, you may eject your USB drive from your Mac using the Finder application.

The USB device should now be recognized by your computer, and it should boot directly from it.

When Windows detects this, it will display a screen and begin the installation process.

Take pleasure in your new computer and your freshly installed copy of Windows. Learn how to code for nothing. More than 40,000 people have benefited from freeCodeCamp’s open source curriculum, which has helped them land careers as developers. Get started today.

How to install Windows 10 from a bootable USB

This article will provide step-by-step instructions on how to install Windows 10 using a USB flash drive. The article is divided into the following parts to make the installation process easier.

  • What you’ll need
  • How to create a Windows 10 bootable USB
  • And more. Installing Windows via booting from a USB flash drive

Requirements: What we Need

  • An internet connection is necessary for the installation of the Windows 10 operating system. USB Pen Drive: A USB Pen Drive with a minimum of 8GB of storage space is required. It is necessary to have a functional Windows 10 PC or laptop in order to produce a bootable Windows 10 USB drive for installation

Windows 10 installation necessitates the use of specific hardware. The minimal setup necessary for installing Windows 10 on your PC or laptop is detailed in the section below.

  • Processor: 1 GHz or faster CPU
  • RAM: 2 GB or more
  • Storage: 20 GB or more for 64-bit Windows 10
  • Display: 1024 x 768 or higher resolution. Monitoring device (monitor or laptop with a minimum resolution of 800×600 pixels)

Creating the Windows 10 Bootable USB

To install Windows 10 using a USB flash drive, you must first make the USB flash drive bootable. To make your USB flash drive bootable, follow the instructions outlined below.

  1. Using this link, go to the Windows 10 download page and click on the Get tool now button to download the Media Creation Tool that Microsoft has made available.
  1. As soon as the program has been downloaded and installed on your computer, you will receive the following answer when you run it for the first time:

3.Click on Accept, and you will be required to do two tasks in a matter of seconds. Create installation media (USB flash drive, DVD, or ISO file) for another PC if you are upgrading your current PC. 4.Because we want to install Windows 10 on another computer using a bootable USB drive, we will selectCreate installation media (USB flash drive, DVD, or ISO file) for another PC and then click theNextbutton. 5.You will now be given to select your chosen language, edition, and architecture; specify your edition, language, or architecture if it is not already known; check the box labeled “Use the suggested choices for this PC,” and then click the next button to proceed.

Note: Before selecting a USB flash drive, make sure that the USB flash drive is connected to your computer or laptop.

8.The utility will begin downloading Windows files to your USB device and formatting it so that it may be used to install Windows.

Note 2: The download time for Windows 10 files may vary depending on the speed of your internet connection.

Installing the Windows using the Bootable USB

Following the creation of the Bootable USB, you will need to connect the USB flash drive to the computer on which you wish to install Windows 10 and adjust the boot order on the machine to reflect the changes. By gaining access to a computer’s BIOS, it is possible to modify the sequence in which it boots. Accessing the BIOS may be accomplished in a variety of ways depending on the PC manufacturer. If you are unsure of how to access your computer’s BIOS, you may look for instructions and assistance on the manufacturer’s website.

  1. Once the boot order has been modified in BIOS, you will be prompted to press a key to boot from the USB drive. After doing so, you will be automatically redirected to the Windows 10 installation wizard, where you will be prompted to select your preferred language, time zone, currency, and keyboard settings, among others. Fill in the blanks and click Next

3.Click on the Install Now button4 to begin. You will be prompted to input your Windows 10 product key in a few seconds in order to activate your operating system. If you have the product key available, input it; otherwise, click on I don’t have a product key to activate your Windows 10 later using the product key that you will receive once you purchase it. 5.After that, you will be invited to select the edition of Windows 10 you wish to install. If you’re not sure which version of Windows 10 you need, you can look it up here.

You will be required to accept the licensing conditions.

To advance, you must first read the licensing terms and then check theI accept the license termscheckbox. 7. Select Custom as the installation type from the drop-down menu. The custom installation option does a complete reinstall of Windows 10 on your PC.

  1. You will be required to allocate hard disk space for Windows 10 installation at this point. Windows will automatically detect the hard disks that are accessible for installation and will prompt you to choose one of them. Select the appropriate one by clicking on the new button

9.Enter the size of the partition in megabytes (MB) and click Apply. 10.Windows will automatically create two partitions; one will be designated for the system by default, and the other can be used to install the Windows 10 files that are now available. 11.Select the Second partition and press the Next button. The Windows installation process will begin, and you will be able to track its progress in percentages. 12. It is possible that the procedure could take several minutes, and your system will automatically restart several times.

Select your area and press the Yes button.

  1. A valid email address, Skype account, or cell phone number will be required to sign in to Windows.

Else, click onCreate account if you don’t already have a Microsoft account; otherwise, sign in using your existing credentials Follow the onscreen steps to create an account, create a PIN, and other important details. 19.After you have completed the registration process, you will receive an email. This process might take several minutes. You are under no obligation to take any further action. 20.After that, you will be taken to your Windows 10 desktop within a few minutes.

How to Install Windows 10, 8.1 or 7 Using a Bootable USB

When it comes to installing a new version of Windows on your laptop, you have a plethora of options to choose. If your computer does not have a CD or DVD drive, you may want to learn how to install your operating system from a “bootable USB” drive in order to get your computer up and running quickly. The CD or DVD drive is no longer present in the majority of current PCs and laptops, rendering installation CDs superfluous and unnecessary. However, while this isn’t a problem in many areas, such as video games and movies, it may be problematic when it comes to software installation in other cases.

This article will go into detail on what a bootable USBis and how to utilize one to produce installation media for multiple Windows operating systems, such as Windows 10, 8.1, or even Windows 7 installation media.

Benefits of installing Windows with a bootable USB

There are several situations in which you may be required to replace your operating system or obtain a completely new one. For example, if you encounter a significant issue, your hard drive becomes damaged or corrupted, or if you’re upgrading or downgrading your system, you’ll need to reinstall Windows. The essential installation files for the Windows operating system must be downloaded and saved before you can reinstall or install the operating system on your computer. This will allow you to boot into the system and install it.

Use a different device nearby if this is not possible, or contact a friend or family member for assistance if this is not possible.

The only way to produce or utilize installation media is for it to be stored on a bootable USB drive, which is not feasible at this time.

USBs are extremely accessible due to the fact that practically every computer is equipped with a USB port that can be used to connect external devices to the computer.

It’s the quickest and most efficient technique of installing an operating system on a computer. Nowadays, you may construct a bootable USB drive that can be used to install several versions of Windows.

How to create a Windows bootable USB with the Media Creation Tool

Before you can use a USB drive to install Windows, you must first produce the installation media for Windows. When the USB flash drive is linked to your computer, this will be read by the computer, allowing it to boot from the USB drive. The instructions below will walk you through the process of creating a bootable USB flash drive using the Media Creation Tool provided by Microsoft.

  1. You may get the necessary installation media from Microsoft by clicking on the following link:
  • Download Windows 10
  • Download Windows 8.1 Disc Image (ISO File)
  • Download Windows 7 Disc Images (ISO Files)
  • Download Windows XP Disc Images (ISO Files)

Follow the on-screen instructions to download the Windows version you choose. Depending on your version, you may be required to give your Windows product key in order to validate your eligibility to download disc images. Download and save the Media Creation Tool to your computer’s hard drive. When the download is complete, run the program and select Accept when requested to confirm that you understand and agree to the software licensing terms. SelectCreate installation media (USB flash drive, DVD, or ISO file) for another PC from the drop-down menu and click theNextbutton to continue.

  • Check theUse the suggested settings for this PCoption if you’re unclear what to do and then proceed.
  • The Windows installation files will begin to download to your USB drive as soon as you plug in your USB drive.
  • Make sure you don’t interrupt the process until the bootable USB device has been successfully made.
  • To begin, you must first create the USB drive, which will be read by your computer and used to boot it from it.
  1. Using your web browser, navigate to theMicrosoft Download Windowspage and click on theDownload tool nowbutton. Download and save the utility to your computer’s hard drive. When the download is complete, run the media production tool and select Accept when requested to accept the tool’s terms and conditions. Select To install a new PC, create installation media (a USB flash drive, DVD, or ISO file) for it and then click on the Next button. Choose your desired language, Windows 10 edition, and system architecture from the drop-down menu.
  1. Put a checkbox next toUse the suggested options for this PCoption if you are unable to modify the settings
  2. Otherwise, continue.
You might be interested:  How To Change Desktop Icon Size Windows 10

Select the USB flash drive from the drop-down menu, then press the Next button and select your USB disk from the list. The Windows installation files will begin to download to your USB drive as soon as you plug in your USB drive. Depending on your internet connection speed, the download may take a long time. Make sure you don’t interrupt the process until the creation tool has been produced and ready to use.

How to boot from USB? Change your computer’s boot order

It is necessary to understand how to boot from a USB drive once you have created installation media. This is required in order to install Windows from a bootable USB drive. The secret is that you must adjust the sequence in which your computer boots. The USB flash drive will be positioned first in the boot order priority list as a result, allowing your computer to view the files stored on it first. This will cause your computer to request you to load the installation disk instead of the system that is currently installed on your machine.

Following the completion of this step, your machine will instantly boot from USB and use the installation disc you produced, therefore initiating the Windows installation process during the next startup sequence.

How to Install Windows using Bootable USB

After successfully changing the boot order of your computer to allow it to boot from a USB device first, you may proceed to install Windows using the installation file included on your USB drive. Note:Before you begin the installation, create a complete backup of all of your files to ensure that you do not lose any important information.

How to install Windows 10 using bootable USB

  1. In order to use your USB device, connect it to your computer’s USB port and turn on the computer. It is possible that you may be prompted to hit a key in order to boot from the USB drive. Select your chosen language, time zone, currency, and keyboard options from the dropdown menu. Once you’ve finished modifying these parameters, click the Next button. (Please keep in mind that these options can be altered at any time after the Windows 10 installation has been completed. ) ClickInstall Now, choose the Windows 10 edition that you purchased from the drop-down menu. Afterwards, clickNext to begin the installation procedure
  2. Select the sort of installation you want. You may either choose Upgrade, which will enable you to maintain your current data, settings, and applications, or Custom, which will do a whole new installation from scratch. The custom option will be selected in this example in order to do a new Windows installation
  3. Windows requires a partition on your hard drive to store system data
  4. This partition will be designated as the primary C: disk during the installation process. Select an existing partition and format it, or remove everything and create new partitions if you don’t want to use an existing partition. If you’ve erased all of your current partitions, the space on your hard drive will be completely unallocated, and you’ll have to start over by creating new partitions. If you have just formatted an existing partition, you can go to Step 7 right away. For the purpose of creating new partitions, follow these steps:
  5. Now pick the partition where you wish to install Windows and clickNext. The process of installing Windows 10 will begin. During the procedure, your computer may need to reboot a few times. After the installation is complete, your computer will automatically restart for the last time. This is perfectly normal. When it starts up for the first time after being shut down, you’ll be able to select more of your preferences, or you may utilize the Microsoft-recommended express settings. To finish, sign in to your Microsoft account in order to access One Drive and to take use of some of the new capabilities included with Windows 10, such as password recovery. You may skip this step if you don’t want to sign in with your Microsoft account and instead follow the steps to establish a local user account.

How to install Windows 8.1 using bootable USB

  1. In order to use your USB device, connect it to your computer’s USB port and turn on the computer. It is possible that you may be prompted to hit a key in order to launch from the USB drive
  2. Select your chosen language, timezone, currency, and keyboard settings. Once you’ve finished modifying these parameters, click the Next button. It is not necessary to be concerned if you have made a mistake since you can always correct it in the future. ClickInstall Select the Windows 8.1 edition that you purchased from the drop-down menu. Afterwards, clickNext to begin the installation procedure
  3. To activate Windows, you must enter the product key that was included with your purchase. When you’re finished, click Next.
  • Please keep in mind that you may not be requested to enter a product key until later in the Windows 8.1 installation process. This differs from one version to the next.

Accept the terms of the licensing agreement and then click Next. Select the type of installation that you like. You may either pick Upgrade, which will enable you to maintain your current data, settings, and programs, or Custom, which will allow you to perform a whole new installation of Windows 8.1 from scratch. In this example, we’ll choose custom to perform a clean Windows installation from scratch. First and foremost, you must erase all the current partitions before performing a complete fresh installation with new partitions.

  • Note: If you haven’t yet made a backup of your hard drive, you may want to pause what you’re doing, back everything up, and then restart. Once you’ve destroyed the partitions, you won’t be able to retrieve any of the data that was previously saved on these hard disks.

The space on your computer’s hard disk will now be available for use. Following that, you’ll need to create a few new partitions on your computer. Choose from a variety of driving alternatives (advanced). Choosing the size of your new partition is done by clicking on New and then Next. As a result, Windows will create a new partition for the purpose of storing system files. To accept, click on the OK button. If you want to create more divisions, simply repeat the previous procedure. Format one of the newly created partitions by selecting it and clicking Format.

When prompted, choose “OK” and repeat the process for any other partitions, with the exception of the one used to store system files.

The installation of Windows 8.1 will begin at this point.

This is quite normal.

How to install Windows 7 using Bootable USB

  1. In order to use your USB device, connect it to your computer’s USB port and turn on the computer. It is possible that you may be prompted to hit a key in order to boot from the USB drive. Select your chosen language, timezone, currency, and keyboard options from the drop-down menu. Once you’ve finished modifying these parameters, click the Next button. It is not necessary to be concerned if you have made a mistake since you can always correct it in the future. To begin the installation process, select Install Now from the drop-down menu. Accept the terms of the licensing agreement and then click Next
  2. Select the type of installation that you like. You may either pick Upgrade, which will enable you to maintain your current data, settings, and programs, or Custom, which will do a new clean installation of Windows 7. Upgrade is the default option. The custom option will be selected in this example in order to do a new Windows installation
  3. First and foremost, you must erase all the current partitions before performing a complete fresh installation with new partitions. Remove the checkmarks next to each partition and click Delete, then OK
  • Note: If you haven’t yet made a backup of your hard drive, you may want to pause what you’re doing, back everything up, and then restart. Once you’ve destroyed the partitions, you won’t be able to retrieve any of the data that was previously saved on these hard disks.

The space on your computer’s hard disk will now be available for use. Following that, you’ll need to create a few new partitions on your computer. Choose from a variety of driving alternatives (advanced). Choosing the size of your new partition is done by clicking on New and then Next. As a result, Windows will create a new partition for the purpose of storing system files. To accept, click on the OK button. If you want to create more divisions, simply repeat the previous procedure. Format one of the newly created partitions by selecting it and clicking Format.

When prompted, choose “OK” and repeat the process for any other partitions, with the exception of the one used to store system files.

Select the partition on which you want Windows to be installed and then click Next. Once the installation is complete, you’ll be prompted to enter the names of the users and computers on your network.

  • Keep in mind that the built-in Administrator account is deactivated in Windows 7, which means that the username you establish will be the only one that is available on the system at first.

Fill up the blanks with your login. The computer’s default name will be username-PC, where username is the username that you’ve supplied, but you may modify this if you want to be more specific. When you’re finished, click the Next button. Finally, input the password for the new user, or simply leave it blank, and then clickNext to proceed.

  • Consider creating a password for your Windows 7 account and remembering to put it somewhere secure. This will be the sole user account that will be created on this system. If you forget your password, you will be unable to log into your Windows machine in the future.

That’s all there is to it! You have now successfully installed a new copy of Windows on your computer using a bootable USB drive. Depending on your manufacturer, you may want to perform a Windows update the next time you start up your computer to ensure that you have the most up-to-date firmware and drivers; otherwise, you should be good to go with your new Windows machine. Continue reading How to Create a Bootable USB Drive Using Rufus to learn more.

Frequently Asked Questions

When you want to boot your computer from a USB stick, you must first insert the USB stick into your computer and power it up. If the installation media does not start immediately, you must first modify the boot order of your computer. This may be accomplished using the BIOS settings. Q: In order for a bootable USB to work with Windows 10, what format should it be in? In order to operate the Windows 10 installer media, your USB flash drive must be formatted in the FAT32 file system. Q: What is the minimum size of a USB flash drive necessary for the Windows Media Creation Tool?

  1. Prior to using the tool, make sure that it is absolutely devoid of everything.
  2. You may learn all you need to know about the Rufus USB program by reading our articleHow to Create a Bootable USB Using Rufus.
  3. No.
  4. If you’re a business owner, you may be forced to prove any digital licenses you have when an audit is conducted on your company.

Final Thoughts

If you want further assistance, ourHelp Centerprovides hundreds of guidelines to aid you with your search. We invite you to return to our site for more helpful articles, or to contact our professionals for quick assistance.

One More Thing

Would you want to be notified about promotions, offers, and discounts that will allow you to purchase our items at the best possible price? Don’t forget to sign up for our newsletter by providing your email address in the box below. Be the first to know about breaking news by receiving it in your email.

You May Also Like

Use Rufus to create a bootable USB flash drive. Instructions on How to Install Microsoft Office Updates» Installing Office on a Windows PC Using My Online Microsoft Account is a simple process.

Leave a Comment

Your email address will not be published. Required fields are marked *