How To Dual Boot Windows 10 And Ubuntu

Contents

How To Dual Boot Windows 10 And Linux (Ubuntu — 20.04 LTS) In A Few Hassle-Free Steps

Windows is the most extensively used operating system in the world today, and it has been for quite some time. It has consistently held more than 70% of the market for personal computer operating systems for several years (Source:Statista). And it’s only natural. The vast majority of individuals who use PCs are not programmers. As a result, they rely on off-the-shelf software and user interfaces for the majority of their needs. So why would you need to utilize a LinuxDistro like Ubuntu in the first place?

  • Speed – Linux is blazingly fast, which is why it is used by the vast majority of the world’s fastest machines. This is a significant benefit if you are dealing with enormous volumes of data
  • Otherwise, it is a disadvantage. Because Linux is so adaptable, it can be used to run practically any application you can imagine. That, too, with a surprisingly low resource use when compared to Windows. Even with older systems, accessing and processing data has become significantly simpler. Developer friendliness — It goes without saying that Linux is a developer’s dream come true. Because of the open-source nature of the software, anybody can contribute to its advancement. Aside from that, the ability to use Dockers is a significant benefit. You can execute algorithms in numerous containers in parallel and with ease
  • You can run algorithms in several containers at the same time.

Even if you are not a dedicated developer, but have a strong interest in information technology, it is worthwhile to experiment with one of the various Linux distributions available. Linux newbies choose Ubuntu, a Debian-based distribution, since it is simple to install and use, and it is a popular choice among them. Microsoft’s long-term stance on open-source platforms and Linux is shifting (seeWSL if you do not want to dual boot but instead wish to run GNU/Linux natively in Windows), as is the general trend in the industry.

), it is probably a good idea to put in the effort and gain some understanding about Linux in the process.

In order for all readers on Medium to benefit from my experience, I thought I’d write about how I went about it here on Medium.

  • Even if you are not a dedicated developer, but have an interest in information technology, it is worthwhile to experiment with one of the several Linux distributions available. Linux novices like Ubuntu, a Debian-based version, since it is simple to install and use, making it a popular choice. Microsoft’s long-term stance on open-source platforms and Linux is shifting (seeWSL if you do not want to dual boot but instead wish to run GNU/Linux natively in Windows), as is the industry as a whole. Yes, it was once unthinkable, but it is now a possibility! ), it is probably a good idea to spend your time and skills in learning Linux as well. I loaded the most recent version of Ubuntu (Ubuntu 20.04 LTS) on my PC last week, then I had to do it again on another PC the following day. So I figured I’d share my process here in the hopes that it may be useful to other Medium users as well as me. How I went about it is as follows:

Let’s get started as soon as you get these. Insert your USB drive and check to see if there are any difficulties with the connection. Any data stored on the USB device will be wiped, so be sure there is nothing important on it. Please make a copy of any vital information. Begin by running the Rufus program that you downloaded earlier (I used version 3.13 fromhere). It will instantly recognize the USB disk that has been inserted. Once you click on choose, you will be presented with a browse box in which you may navigate to the Ubuntu ISO file that you previously downloaded.

  • Choose the option as shown by the red outlines in the figure below.
  • Click on start and wait for a few minutes; depending on the pace of the drive’s writing, this should take a couple of minutes.
  • By default, the drive would have been identified as UBUNTU 20 0 () if it had been formatted.
  • The Disk Management window will open as a result of this action.
  • Select shrink volume from the context menu by right-clicking on it.
  • You may change things up based on how much room you have available.
  • That is all there is to it; you now have a fresh unallocated partition for your Linux setup.

There is also a very essential word of caution to be mentioned here: In order to install any Linux distribution, the disk type must be Basic, as only this kind is supported by the operating system.

For any data on Disk 0 (particularly a Windows Recovery Drive), the process of returning it to Basic type is time-consuming and inconvenient.

Paragon is the only program I’ve discovered that allows you to convert Dynamic to Basic without having to worry about formatting.

Alternatively, you may use this program to create a partition on your hard drive.

The whole tutorial, along with screenshots, can be found here.

Restart your computer.

You will be presented with the following screen: Select your USB drive as the boot device and press the Enter key.

There is only one minor inconvenience: you would have to connect your USB flash drive every time you wanted to utilize it.

Make a connection to your Wi-Fi (optional but recommended as the packages and updates will be installed).

Also choose the option to install third-party applications if applicable (includes codecs e.g.

This is distinct from the actual login password, which will be provided later on in the process.

This password is not frequently used, but it should be kept on hand in case you need to install anything that may cause the boot loader to be changed in the future. From here on out, things get a little complicated. You have three choices:

  1. Install with Windows Boot Manager — This will automatically partition your hard drive for you, but you will not have the option of customizing the partitioning, nor will you be able to choose where you want the boot loader to be installed. Erase the disk and install Ubuntu – This is something you probably don’t want to do because it will completely wipe out your Windows installation. Some other option – This is what we want to pursue, and we have set up a free space partition just for this reason.

You will be presented with the following window. As you can see, there is approximately 20 GB of free space listed on that page. This is the format that we will utilize. Choose a blank area on the screen. Click on the plus sign (+) in the bottom left corner of the screen, as shown by the mouse pointer in the image below. You will be presented with the partitioning choices. We have around 20 GB of storage space available. I’ve taken 13 GB of that space and put it to use as the ext4 file system.

  • To proceed, click Ok.
  • This one will be used as a replacement (a kind of backup RAM).
  • Select the ext4 partition that was created, which in this case is /dev/sda5, from the Device for Boot Loader Installation drop-down menu at the bottom of the screen.
  • Install now by selecting it from the drop-down menu.
  • After that, you’ll be able to create a login and password.
  • Continue to the next step and the installation process will begin.
  • Once you’ve finished, click Restart Now.

In this case, press Enter after removing the USB Flash drive.

There you go, almost done.

Done!

This is the window you should see.

Once you restart your PC, you will automatically go into the Windows boot by default.

I hope you had a successful installation!

Here are some start-up resources: You can also get used to common shortcuts and commands from the link below: And as a bit advanced level, you can unleash the power ofbashand type commands like a pro using the cheat-sheet in the link below: That’s all there is to it!

Cheers!

How to install Ubuntu 20.04 and dual boot alongside Windows 10

Depending on how you use your computer, making the switch to Linux might be a difficult decision. In certain cases, you just require Windows for a single program, and in others, you require Linux for a variety of apps. A computer with both operating systems installed might be handy for a variety of reasons, whether you’re just interested or you need it for business or a personal project. Throughout this essay, I’ll walk you through the procedures necessary to install Ubuntu 20.04 alongside your existing Windows 10 PC.

  1. The first step is to download the Ubuntu ISO file that you intend to use to install the operating system.
  2. Go to the 20.04 LTS button and click on it.
  3. Many individuals believe that opting for LTS is the best option.
  4. It is possible that your browser will prompt you whether you want to save or open the file.
  5. Because the ISO file is around 2.8 GB in size, expect the process to take some time.
  6. The next piece of software that you will want is one that will allow you to generate the installation media.
  7. Balena Etcher is a musician that I really adore.

Etcher is a cross-platform application that runs on Windows, MacOS, and Linux and is quite simple to use.

The Balena Etcher is being installed.

You may either use a CD (yes, CDs are still in use) or a USB stick to save your data.

Make sure the USB stick is completely empty before continuing since all of the data will be deleted in the following step.

balena Etcher was responsible for the creation of the installation medium.

In all likelihood, it may be found in your downloads folder.

Then you must pick the USB stick that has been inserted into your computer and that you wish to use as the installation medium.

The simplest method is to compare the memory sizes of the various alternatives and choose the one that corresponds to the memory size of your USB stick.

This will take some time as well.

You’ll need to clear some space on your hard disk so that your computer knows where to look for Ubuntu to install.

Enter the term “partition” in the search field of the Start Menu to find what you’re looking for.

When the partitioning program is first used, a new window titledDisk Managementshould appear.

The reason for this is that I have removed the USB stick and I only have one little hard disk in my demo setup, so I only have one hard drive in total.

Given that you have sufficient storage space on your SSD drive, you will almost certainly wish to install Ubuntu on it.

In addition to installing apps and storing data on Ubuntu, you will most likely want a small amount of additional storage space for your Ubuntu operating system.

If you wish to install Ubuntu on two hard drives, one for the system and another for storing your personal stuff, you may save money by using less space.

In order to make more space available on a partition, right click it and select “Shrink Partition.” Then, from the context menu, select “Shrink Volume.” from the drop-down list.

Enter the desired quantity of Mega Bytes for your Ubuntu installation in the appropriate field.

To shrink the image, click on the “Shrink” button.

It will take some time for the new empty partition to be created, after which it should be shown as Unallocated.

After you have completed this step, you may proceed with the Ubuntu installation.

You might be interested:  How To Force Restart Windows 10

It is now necessary to reconnect the flashed USB stick to your computer and restart it.

The key you should press is determined by the manufacturer of your computer.

If this is the case, you may need to search it up either in the manual for your computer or on the internet.

Each motherboard’s BIOS might be a little bit different from the next.

You should move the item for USB devices to the top position in the list when you discover it, so that when you restart the computer, it will immediately boot from the USB stick containing the Ubuntu installation media.

Then there is no need to modify the boot order, and you can just boot the computer from the USB stick without having to do anything more.

Keep in mind that disabling the fast-boot option in your BIOS can prevent problems while moving from Windows to Linux in some circumstances.

Additionally, it is possible that the secure-bootoption will need to be deactivated.

During the installation process, as well as after rebooting, you will be prompted to enter a password on your computer.

As soon as your computer begins to boot from the USB stick, the Ubuntu logo will appear on the screen.

Ubuntu’s initial startup screen Following the completion of the file check, your computer will display the Ubuntu welcome screen, from which you may select whether you wish to “Try Ubuntu” or “Install Ubuntu.” The first choice is best suited for determining whether or not everything, such as the Wi-Fi drivers or other hardware, is operational.

  1. Ubuntu’s initial splash screen The first step is to choose a keyboard layout that suits your needs.
  2. The Ubuntu operating system can assist you if you are unsure of the layout of your keyboard.
  3. Because I am using an Ethernet connection in my configuration, this step has been skipped by the system in my case.
  4. Ubuntu may be installed in two ways: as a standard installation or as a minimal installation, depending on your preferences.
  5. Additionally, you should select the boxes for downloading updates during the installation and for installing third-party software, which may contain Nvidia GPU drivers and codecs for MP3 files, among other things.
  6. Now you must decide how you want Ubuntu to be installed on your system: whether to delete your complete hard drive or whether to install Ubuntu alongside Windows 10.
  7. In addition, I have reservations about the automated installation of Windows with other programs.

According to your hard drive’s storage capacity, you have some spare space.

Partition manager for Ubuntu You may also decrease the partitions in this location, but I prefer doing so on Windows instead since it allows Windows to move data around in accordance with the changes.

To create a new partition, just choose the open space partition and click on the + sign to the right.

As an extension to your RAM (Random Access Memory), which is the quick memory that it requires instantly in order to work, it is used to store data.

Note:Most guidelines I’ve seen indicate that you use a SWAP partition that is double the size of your RAM and at least the same amount of memory as your RAM for best results.

Nowadays, the majority of systems have at least 8 GB of RAM.

I have 8 GB of RAM available on this pc.

That should be plenty.

Then press the “OK” button on the clock.

Following that, you’ll need the so-called “root” partition, which contains all of the system files required by Ubuntu in order to run properly.

As a result, we’ll need to establish two more partitions.

If you’re creating a root partition, make sure to choose the “Primary” partition type because this partition will be required to be bootable.

The mount point must be “/,” which refers to the “root” partition and must be used.

Once more, click on the plus icon to create a new partition and dedicate the remaining space to this partition, as you did previously.

When it comes to mounting, the mount point is “/home.” This partition will serve as a storage location for all of your personal files.

For the reason that I’m creating it as a distinct partition, it’s so that you may use the same process to build another partition on another hard disk.

Although my configuration did not include two hard disks, the technique would be the same, with the exception of the fact that you must pay close attention to which free space is being utilized for the “root” partition and which is being used for the “home” partition.

Now that all of the partitions have been formed, you should have no more empty space on your hard drive.

The disk where your Windows 10 boot loader is installed is most often the same drive where this is the case.

a high-level overview of the partitioning In the following step, you simply select the country in which you are currently located.

The time is also shown differently based on your country’s default system, with the 12-hour format being displayed instead of the 24-hour format.

Last but not least, you must register for a user account on the system.

You may even alter the computer’s name if you like.

In addition, you must create a password.

Consider using a password you will be able to remember because you will be required to enter it every time you wish to add or remove software or update your system.

Create a user account for yourself.

Ubuntu will be installed in a short period of time.

The installation of Ubuntu is now underway.

Time for another cup of tea, perhaps?

After that, when you boot up your computer, you will see the GRUB boot screen for the first time.

The GRUB boot screen will display the operating systems that have been installed, such as Ubuntu and Windows 10.

Take pleasure with your Ubuntu system!

You simply need to be aware of the steps that must be taken in order to proceed.

The installation method is typically relatively identical from one computer to the next.

It is entirely up to you to make your decision.

If you are unsure which version to choose, it is never a bad idea to start with the default Ubuntu version. This will save you time and effort. It is extremely user-friendly and has a large user base, as well as a large number of tutorials and explanations that you may use as a reference.

How to Install Ubuntu Alongside With Windows in Dual-Boot

On computers that come pre-installed with Windows 10, this tutorial will show you how to install Ubuntu 20.04, Ubuntu 19.04, Ubuntu 18.10, or Ubuntu 18.04 in dual-boot mode with a Microsoft operating system on machines that come pre-installed with Windows 10. This instruction is written with the assumption that your computer came pre-installed with the Windows 10 operating system or a previous version of Microsoft Windows, such as Windows 8.1 or 8. You should alter theEFIsettings and disable the Secure Bootfeature if your hardware makes use of the UEFI bootloader.

If your computer does not already have another operating system installed, you should first install Microsoft Windows and then proceed with Ubuntu installation.

Requirements

Utilize the following link to download the Ubuntu ISO Image that corresponds to your system architecture:

  • Download Ubuntu 20.04 Desktop
  • Download Ubuntu 19.04 Desktop
  • Download Ubuntu 18.10 Desktop
  • Download Ubuntu 18.04 Desktop

Step 1: Prepare Windows Machine for Dual-Boot

For systems installed on a single partition, the first step is to free up space on the computer’s hard drive. 2.If the system is installed on several partitions, the second step is to free up space on the computer’s hard disk. Log into your Windows computer using an administrator account and then right-click on the Start Menu-Command Prompt(Admin) to launch the Windows Command-Line. Installing and configuring Windows for dual booting with Ubuntu 2. As soon as you enter theCLI, run the command diskmgmt.mscon prompt, and theDisk Managementutility should be launched.

C:Windowssystem32diskmgmt.msc Reduce the size of the volume to resize the Windows partition 3.

Once the space has been enlarged, you will see that there is additional unallocated space on the hard disk.

Creating a Windows partition for the purpose of installing Ubuntu Windows Partition for Dual-Boot Configuration Ubuntu Setup and Configuration

Step 2: Install Ubuntu with Windows Dual-Boot

Four, we will be installing Ubuntu 20.04 with Windows 10 dual boot for the sake of this tutorial (you can use any Ubuntu release for installation). Go to the Ubuntu Desktop 20.04 ISOimage download link provided in the topic description and save it to your computer. Generate a bootable USB stick by burning the image on a DVD or using a software such as Universal USB Installer (which is BIOS compatible) or Rufus to create a bootable DVD (UEFI compatible). Placing the USB stick or DVD in the proper drive, rebooting the computer, and instructing the BIOS/UEFI to boot up from the DVD/USB by hitting a particular function key will do the task (usuallyF12,F10orF2depending on the vendor specifications).

  • SelectInstall Ubuntufrom the drop-down option and press Enter to proceed.
  • You will be presented with a fully working Ubuntu system running in live mode after the boot media has finished loading into RAM.
  • Make your selection of the keyboard layout in which you desire to execute the installation and then click on theContinuebutton to start.
  • Choose Ubuntu Keyboard Layout 6 from the drop-down menu.
  • Choose Ubuntu Normal Installation 7 from the drop-down menu.
  • You can choose to install Ubuntu with Windows Boot Manager, which is a convenient option that will take care of all of the partitioning tasks for you.
  • If you prefer a different partition configuration, select theSomething elseoption and then click on theContinuebutton to move to the next screen.
  • Choose Ubuntu Installation Type 8 from the drop-down menu.
  • This article will propose that you establish two partitions, one for root and the other for homeaccounts data, and that you do not create a swap partition (use a swap partition only if you have limited RAM resources or you use a fast SSD).

The rootpartition is the initial partition formed. To create it, choose the free space (the decreasing space from Windows that was created before) and click on the+icon below. Use the following specifications in the partition settings and then press OK to save your changes:

  1. A minimum of 15000MB should be used. The new partition will be of type Primary, and it will be located in the beginning of the new partition. Use as a journaling file system for =EXT4
  2. =/
  3. Mounting point

Create an Ubuntu Root Partition on your hard drive. Root Partition Configuration To create a home partition, use the same steps as described previously. Make use of all of the available free space allowed for the size of the home partition. Ideally, your partition settings will look like this:

  1. Size is defined as the total amount of available free space. Primary is the partition type for the new partition. The location of the new partition is defined as “Beginning
  2. ” Use as a journaling file system for =EXT4
  3. Point of adduction =/home

Create a Home Partition number nine. As soon as you’re finished, click theInstall Nowbutton to apply the modifications to the disk and begin the installation process. A pop-up window should appear informing you of the availability of swapspace. By hitting theContinuebutton, you may dismiss the alert. Following that, a new pop-up window will appear and ask you whether you accept to save the modifications to the disk. To save the modifications to disk, press the Continue button. The installation procedure will now begin.

  • 10.
  • When you’re finished, click Continue to proceed.
  • 11.
  • These are all of the configuration options available for modifying the Ubuntu installation.
  • Create a user account on Ubuntu.
  • When the installation procedure is completed, you will be notified.
  • The machine will reboot into theGrubmenu, where you will be offered with the option to select which operating system you desire to use going forward for the next 10 seconds: Ubuntu 20.04 or Microsoft Windows are both supported.

As a result, just press the Enter key or wait for the 10-second timeout to expire.

Grub Menu for Ubuntu and Windows Dual Boot 13.

Ubuntu is pre-installed with NTFS file system support, allowing you to access files on Windows partitions simply by double-clicking on the Windowsvolume.

That’s all there is to it!

Alternatively, you can read our post Top 20 Things to Do After Ubuntu Installation for more information on installing more software packages and customizingUbuntu.

If You Appreciate What We Do Here On TecMint, You Should Consider:

A community site dedicated to Linux Articles, Guides, and Books, TecMint is the fastest growing and most trustworthy source for Linux information on the internet. Millions of visitors come to TecMint!

each month to search or read the hundreds of published articles that are available to everyone for FREE. If you enjoy what you are reading, please consider purchasing us a cup of coffee (or two) as a show of your gratitude. We are grateful for your unwavering support throughout the years.

WindowsDualBoot – Community Help Wiki

This article shows how to set up your computer so that it can run both Ubuntu and Windows at the same time. The practice of dual-booting is not advocated despite the fact that it has various advantages (for example, greater performance for a native system). As an alternative, it is preferable to perform a native installation of Ubuntu before virtualizing the other operating system. In the event that your hard drive becomes corrupted during the process of performing a dual-boot installation (or any other hard drive modification), it is critical that you back up your contents to an external backup medium before proceeding.

  • Windows recovery/re-installation CDs or DVDs are included with some computers purchased from computer makers who pre-install the operating system.
  • After that, a tool is generally given that allows the user to make a recovery/re-installation CD or DVD from the data on the hard drive.
  • If your computer maker does not include a recovery CD or DVD, as well as a recovery partition or burning tool, you may need to contact your vendor and request a recovery CD or DVD (to which you are normally entitled under the Windows EULA).
  • SeeWindowsRecoveryCd.
  • The Ubuntu operating system may be installed with it intact without any issues.
  • Make sure that Windows is already installed if it is not already.
  • Therefore, you will not have to enlarge your Windows system’s NTFS partition in order to accommodate Ubuntu, which will save you some time.
  • You may accomplish this during the Ubuntu installation stage, or you can seeHow to Resize Windows Partitionsfor more information on alternative methods.

If you have enlarged a Windows 7 or Vista disk and are unable to boot into Windows, you can follow the steps from WindowsRecovery to resolve the problem.

Install Ubuntu

  • Download an Ubuntu LiveCD image (.iso) fromUbuntu Downloads and burn it to a disc (seeBurningIsoHowto for more information). Insert the LiveCD into your computer’s CD-ROM drive and restart the computer. If the machine does not boot from the CD (for example, if Windows starts up again), restart the computer and check your BIOS settings by using the F2, F12, Delete, or ESC keys on the keyboard. Select “boot from CD” from the drop-down menu. Continue with the installation until you are prompted with the following question: “How would you want to partition the disk?” In the event that you have previously partitioned your drive and reserved space for Ubuntu, you may just install it there and then proceed with the remainder of the processes. If this is the case, take one of the following two steps:
You might be interested:  How To Factory Reset Hp Laptop Windows 10

Automatic partition resizing (not recommended)

  • Choose the first choice, which should state “Install them side by side, choosing between them on each startup”
  • Then click on the second option. By sliding the slider at the bottom of the window, you may specify the size of the new division. Select “Forward” from the drop-down menu. Continue to the next section, Finishing the Ubuntu Installation.

Manual partitioning

  • Select “Manually modify partition table” from the drop-down menu. Your existing partitions will be listed in this section. Select the partition that you wish to resize and hit the Enter key to proceed. Select “Size:” and press the Enter key
  • Yes should be selected, and Enter should be pressed. Type in a new size for your partition in gigabytes
  • It is advised that you leave at least 10 GB of free space for your Ubuntu installation. When you are satisfied with your modifications, press Enter. It may take some time for the modifications to take effect. Create a swap partition that is at least as large as your amount of RAM (8000 MB is a decent starting point if you don’t know how much RAM you have)
  • Make a partition on your hard drive for your Ubuntu installation. If further partitions are required, they should be created as follows: seeDiskSpace
  • Select “Finish partitioning and write changes to disk” from the drop-down menu.

In Ubuntu, the boot manager GRUB2 is the one that is installed by default. GNU GRUB2 is an open source boot manager that is used to install the majority of the boot loaders inside the Ubuntu operating system. This implies that Ubuntu is completely independent of other operating systems, and there is no need to write code for them. This may be accomplished by changing a little piece of code in the MBR (Master Boot Record) of your computer’s first hard drive or the EFI partition. The only other component of your computer that requires modification is the kernel.

  • You will be provided with a list of operating systems, from which you may choose which one to start up on your computer.
  • Selecting Windows causes GRUB or LILO to chain-load the operating system from the Windows boot sector, which is the first sector of the Windows partition, to the current location.
  • Instead, Vista creates a boot folder in which it keeps all of the data necessary for its new boot manager.
  • You might want to have a look at it.
  • EasyBCD is extremely user-friendly, and many Vista users have expressed their satisfaction with it.

Recovering GRUB after reinstalling Windows

Please refer to theReinstalling GRUB2guide for further information.

Master Boot Record backup and replacement

This approach will not work on PCs that use the UEFI boot system. As a result, it will not operate with pre-installed Windows 8 and some pre-installed Windows 7 systems. Install Windows, replace the existing MBR with the backup, overwriting the Windows boot code, and then restart your computer:

  1. Construct an NTFS partition for Windows (using fdisk, GParted, or any other program with which you are comfortable)
  2. And Backup the MBR, for example, with the command dd if=/dev/sda of=/mbr.bin bs=446 count=1
  3. Install Windows on your computer. Start by booting into a LiveCD. Your root partition should be mounted in the LiveCD. Restore the MBR by using the following command: dd if=/media/sda/mbr.bin of=/dev/sda bs=446 count=1
  4. Ubuntu will boot if you restart your computer. Configure GRUB to boot Windows from a USB drive
  • Multiple Operating Systems Boot (MultiOSBoot)- How to boot more than two operating systems from a single hard drive
  • Virtualization Categories

How to Dual Boot Ubuntu and Windows 10

This tutorial will walk you through the process of dual booting Ubuntu and Windows 10 on the same machine. Dual booting refers to installing both Ubuntu and Windows 10 on the same computer and then using GRUB (the Ubuntu boot manager) to choose which Operating System to boot at any given moment.

What you need for the Dual Boot

  • The use of a PC with Windows 10 already installed. a USB flash drive having at least 3GB of empty space on it

Dual Boot Ubuntu and Windows 10: High Level Steps

Follow these instructions to dual-boot Ubuntu and Windows 10 on the same computer:

  1. Install Ubuntu after downloading it
  2. Prepare Windows 10 so that it can dual boot with Ubuntu
  3. And enjoy!

This approach is predicated on the assumption that Windows 10 is already installed on the PC on which you wish to dual boot with Ubuntu. If you haven’t already done so, download and install Windows 10 before continuing.

Dual Boot Ubuntu and Windows 10: Download Ubuntu

To download Ubuntu Linux, simply follow the procedures outlined below.

  • After that, select the version of the software you want to install. I’m using the 19.04 edition of Ubuntu for this tutorial.
  • When the above-mentioned page has fully loaded, click on the link to the right to download the desktop image. Save the file to a USB flash drive

You can move to the next step while the download is taking place.

The download might take up to an hour, depending on your internet connection speed. Immediately after the download is complete, save the ISO file to your PC. Afterwards, follow the steps outlined below to configure Ubuntu to boot from a USB stick: (or drive).

  • Download the Universal USB Installer from here. Continue to the bottom of the page and click Download UUI
  • After that, double-click the installer to start it. Afterwards, confirm your acceptance of theUser Acces Controldialogue.

Before you begin, make sure your USB is formatted using the FAT32 file system.

  • When the UUI loads, configure it as indicated in the following image. When you get to Step 1, pick Ubuntu from the drop-down menu. Step 2 involves clicking Browse, navigating to the directory where you saved the downloaded Ubuntu ISO image, and then clicking it. Finally, pick the USB device you want to use from the drop-down menu that appears beneath Step 3. To generate the installer, select Create from the menu bar.
  • As soon as you click on Create, the window shown below will appear. ClickYes. The second image below will appear on the screen. Wait for the USB stick processing to be completed before continuing.
  • When the USB preparation is complete, click the Close button. Proceed to the next stage after that.

Dual Boot Ubuntu and Windows 10: Prepare Windows 10

This is a two-stage procedure.

  1. Make sure there is enough space on your hard drive to accommodate Ubuntu installation. Windows 10 secure boot (UEFI Secure Boot) should be disabled.

Create a free space on the hard disk to install Ubuntu

To prepare your computer for dual booting Ubuntu and Windows 10, you must first clear up some space on your hard drive. This is the location where Ubuntu will be installed. Follow the methods outlined below to free up some space on your Windows 10 computer.

  • Sign in to Windows 10 with your credentials. Then right-click on the Windows logo and choose Disk Management from the context menu.
  • Shrink the volume of drive C by selecting it from the right-click context menu when Disk Management loads. Wait for Disk Management to compute the amount of free space available
  • When the option to downsize drive c appears on the screen, enter the value shown in the highlighted portion of the figure below

You’ll need at least 2GB (2000MB) of free space to install Ubuntu, but I recommend entering at least 10000. (10GB).

  • When you have finished entering the figure, clickShrink to make it smaller. When the driveShrink competes, you will have free space on your hard drive. Check out what has been highlighted in the image below.

Make a note of the size of this particular division. During the Ubuntu installation process, you will be prompted to choose it. DO NOT format it in any way.

Disable Windows 10 secure boot (UEFI Secure Boot)

This step may not be necessary for some devices. However, it is suggested to ensure that Ubuntu is able to boot properly. Warning! There are hazards involved with removing the secure boot feature in Windows 10. One concern is that your computer may become more susceptible to boot sector malware assault as a result of this change. The following are the actions to take to turn off secure boot:

  • Search for Command Prompt in the Start menu of Windows 10, right-click it, and selectRun as Administrator
  • When the Command Prompt window appears, enter the command shown below. Then press the Enter key.

The shutdown command is shutdown.exe /r /o /f.

  • Windows 10 will restart in Advanced boot mode after a brief pause. Take a look at the image below.
  • Finally, press the Restart button. UEFI will be selected as the boot option for your machine. Secure Boot should be located and disabled.

Dual Boot Ubuntu and Windows 10: Install Ubuntu

You are now prepared to begin installing Ubuntu! This is the final step in successfully dual booting Ubuntu and Windows 10. Installing Ubuntu is simple if you follow the procedures outlined below.

  • Even if you’re still in into Windows 10, enter the command prompt as an administrator. Then type the command listed below and hit the Enter key

The shutdown command is shutdown.exe /r /o /f.

  • You will be prompted to reboot your machine into advanced Windows 10 mode. Take a look at the image below:

Follow the on-screen instructions to pick your USB drive as your installation medium. Then follow the steps outlined below to complete the installation.

  • When your computer launches into the Ubuntu installation screen, choose Install Ubuntu. Then press the Enter key.
  • Select a different installation type from the drop-down menu. Then choose “Continue”

The first choice is the most common. Installing Ubuntu alongside the Windows Boot Manager may be successful. It’s something I haven’t tried yet. By selectingSomething else, you will be given the opportunity to choose which partition will be used to install Ubuntu.

  • When you get to the Installation type screen, choose the free, unformatted partition to use. To add a partition and provide a root Mount point, click on the plus symbol (plus sign).

Warning! If you used Shrink to generate space on your hard drive, make sure you choose that space in Disk Management. Selecting the incorrect partition will result in the complete erasure of your Windows 10 installation.

  • A new window called Create partition will open when you click on the plus symbol (+). Configure it as indicated in the screenshots below. Then press the OK button.
  • Upon creation, the partition will be mounted at the root (/) directory.
  • When you choose the partition you established above, make sure theFormat?column is checked. Then select Install Now from the drop-down menu. When the Write changes to diskpop-up window appears, select Continue.
  • After that, choose your location. Then click on the Continue button. Complete the information on the next page and then click Continue.
  • When the installation is complete, select Restart Now from the menu bar.
You might be interested:  How To Add Airpods To Windows 10

Following the reboot, you will be presented with the option of booting into Ubuntu or Windows 10. (shown below asWindows Boot Manager).

Conclusion

With this instruction, I hope you have been able to successfully dual boot Ubuntu and Windows 10. Alternatively, you may use the “Comment” box at the bottom of this page if you have any questions. You might also tell us about your dual-booting experience with Ubuntu and Windows 10.

Other Helpful Guides

  • Using Windows 7 and Windows 10 at the Same Time: A Step-by-Step Guide
  • Windows 10 won’t boot up and displays a black screen? 3 Solutions to the Problem

Additional Resources and References

  • Download Ubuntu
  • Universal USB Installer
  • EasyBCD
  • How to Install Ubuntu in a Hyper-V Generation 2 Virtual Machine

Ubuntu en Windows 8 via Windows 11 installeren als een dual-boot op uw Dell computer

This section of the document does not apply to this article.

Oplossing

There are three things that you must keep in mind before proceeding with the installation of Ubuntu:

  1. Specify the type of hardware controleren that you intend to install. The BIOS settings are in charge of controlling the functions that you require for the installation. Controlling the version of Ubuntu you want to install is important.

Op welk type hardware installeert u en verandert dit de wijze waarop u de installatie uitvoert?

The kind and indeling of your storage media may have an impact on the time it takes for you to install Ubuntu on your machine, so keep this in mind. As an illustration, consider the installation of one of the new M2-kaarten. Installation on a standard SATA hard disk drive station (not included). Alternatively, installation on the same SATA hard disks in an Intel Matrix RAID-configuration is possible.

When you have complete control over the computer’s hardware, you will know exactly what you need to install. You may also read the following articles to have a better understanding of how to customize your installation process to match your computer hardware:

  • Installing Ubuntu on a Dell computer equipped with a PCIe M2-kaartstation
  • Installing Ubuntu on a Dell OptiPlex computer with a RAID configuration

WARNING: USB 2.0 and older verwisselbare media-devices will not be supported on PCs equipped with the new Intel SkyLake CPUs, according to the manufacturer. The USB 2.0 Hub does not receive any further support from the chipsets used by these processors.

Welke BIOS-instellingen hebt u nodig voor het installeren van UEFI?

OPMERKING:Please keep in mind that the legacy-ondersteuning of Dell PCs has been removed from the most recent generation of Dell laptops. The difference between traditional and Unified Extensible Firmware Interface (UEFI) BIOS-instructions might be the difference between an installation that works and one that does not work. Follow the steps listed below: To access the BIOS, use the F2 key at the opstarten. Set the BIOS to UEFI mode, disable the Legacy Option ROM suit, and disable the secure boot option.

OPMERKING:Not every Dell BIOS has the same layout, and the page names can vary depending on the model.

  • The Dell BIOS is being updated in Linux and Ubuntu environments

Welke versie van Ubuntu wilt u installeren?

Ubuntu, like other besturingssystems, is always being improved on the fronts of usability and performance. What is different about Ubuntu is that you have the option to choose between two updates at any given time: The first is the most recent long-term support (LTS) release, which is the second. This upgrade is available for download for the next two years and will be supported by Canonical with updates for the next five years. This version is praised for being a well-constructed and stable structure.

This upgrade will be available for download for the next six months, and Canonical will continue to support it with updates for the next nine months.

These builds are used by testers and developers to test and develop new features.

Windows moet als eerste op de harde schijf opstarten

If you haven’t installed Windows yet, you can use one of these handleidings by connecting to the computer using the link below. Here you will find the proper installation instructions for the besturing system that you are currently using:

  • A step-by-step guide for the installation and configuration of your besturing system on your Dell computer, available online.

While configuring your Windows startup partition in Windows Setup, you’ll want to make a backup of your hard drive in order to have enough space for the Ubuntu installation later on. OPMERKING:Onthou: After creating your Windows startup partition, you’ll want to partition your hard drive so that you have enough space for the Ubuntu installation later on. This will save you a great deal of time and effort in the future. Do not forget that a back-up system is always available and quite useful in the event that something goes wrong with the besturings system.

Windows is al geïnstalleerd.

The vast majority of PCs are delivered with a Windows version that has already been installed and that has used up the whole hard drive space.

It is necessary to reduce the size of the Windows-partition. Here, space has been made available for the Ubuntu-use. partition’s Back to the top of the page

Installatiepartities instellen

  1. This step may be completed most efficiently with the use of the Windows scheduling system.
  • Windows 11 and Windows 10
  • Windows 8.1 and Windows 8
  • And Windows 7 and Windows Vista.

Windows 11 en Windows 10

Schijfbeheergebruiken:

  1. Select the volume (partition) that you wish to reduce and then click on the Actie button at the bottom of the screen. In the actionmenu, selecteer alle takenen afhankelijk van de Volumeverminder.
  1. Choose the most appropriate bedragen for your computer and press the Versmall button.

Windows 8.1 en Windows 8

Schijfbeheergebruiken:

  1. Activate Win+X to bring up the start screen
  2. SelecteerSchijfto activate the menu that appears
  1. Click with the right mouse button on the portion of the screen that you want to shrink and follow the instructions on the screen.

OPMERKING:Try not to create any Linux-specific partitions in this directory. The installation of Ubuntu is responsible for this. IMPORTANT:If you have accidentally deleted the Windows startup partition and are unable to restart your computer, you can use the Windows Recovery-help programs to repair your computer. Handling instructions may be found on this page.

  1. Having created the necessary space on the hard drive, you will be able to easily install Ubuntu as a second besturingssystem after the necessary space has been allocated. You must then start from your Ubuntu DVD or USB storage device
  2. Log in as Administrator and control whether or not the opstartenis is completed quickly and efficiently. (This may indicate that GRUB in a later stage of the installation of Windows may interfere with the installation.)
  1. Make a note of the configurations folder. In this case, the DeWindows-toets+Xis a fast connection to all latest versions. Deenergiebeheerropties are open for business. The aan/out-knop is selected by selecting it from the drop-down menu. SelecteerInstuctions are changed to make them available when they are not currently available. In order to ensure that the vakje with the optionSnel opstarten inschakelen (Aanbevolen)is properly prepared,

Ubuntu als tweede besturingssysteem installeren

Follow the steps below to install Ubuntu on your Dell computer and adjust the BIOS to allow for the use of grubx64.EFI (which is required for proper operation):

  1. Do you have a copy of Canonical’s most recent installation DVD or USB? If so, please contact us. These contain the most recent upgrades and fixes for this besturingssysteem, which are available. (You may create a third-party application, such as Rufus, that makes use of the bootable USB-station.) In the event that you have decided on which version of Ubuntu you would want to install, you may obtain the most recent Ubuntu ISO from Canonical.

Dell does not run or support applications such as Rufus, according to the company’s policy. The use of third-party applications is done so at the user’s own risk.

  1. When the Dell welcome screen appears, quickly press F12 to start the installation process. You may see the menuEasy to use opstarten. Select your starting technique with the help of the decursor-/pijltoetsenen and then press ENTER. When the installation process begins, select the optionTry Ubuntu (Ubuntu proberen). This option allows you to keep track of whether or not your hardware is being properly recognized by Ubuntu. When you’re ready to go, simply click on the button labeledInstall Ubuntu to get started. After that, the installation wizard is launched, which guides you through a number of options. Select your installation categories and click on the Continue(Doorgaan) button.
  1. The venster for the toetsenbordindeling has been re-assigned. Choose the most appropriate toetsenbordindeling for your machine and press the Doorgaan button.
  1. It has been revealed that the vensterPreparing to install Ubuntuwas revealed. Select the most appropriate options and press the Continue(Doorgaan) button.
  1. Whenever a computer does not have a wired network connection, you will be instructed throughout the installation process to set up a wireless network connection. The venster for this sort of installation will be provided to you. There are a variety of options available to you.
  1. If you want to install Ubuntu alongside other operating systems, you should read the following documentation before selecting the optionInstall Ubuntu alongside(Ubuntu ernaast installeren) from the drop-down menu. Continue to Step 14
  2. If you want to install Ubuntu on your whole hard drive, select Erase DiskInstall Ubuntu from the drop-down menu (Schijf wissen en Ubuntu installeren). Then select the hard drive on which you wish to install Ubuntu and click on Next. For further information, please refer to the following user guide.
  • Ubuntu may be installed on your Dell computer. OPMERKING:As previously stated, all data and PCs that are now on the schijf have been seized.

If you want to put hand-made parts on a hard drive, be sure to read the following instructions before selecting the optionSomething Elses from the drop-down menu.

  • There are several unsavory characters who appear throughout the Ubuntu installation process.
  1. During the installation process, you will be asked if you want to partition the hard drive. During the installation process, the besturingssystem is installed in the following locations:
  1. SelecteerResize the IDE1 master and partition1 (hda1) to make advantage of the available capacity
  2. Select the proportion of the new party’s grootte as the percentage of the hard schijf and press the Forward(Doorgaan) button. Continue with the installation process.

Please select a partition that you have created for Ubuntu.

  1. The most of the time, this is trueManually edit partition table
  2. Select the desired party from the drop-down list and press the Enter key. Click on opSize(grootte), and then on opENTER. enYes(Ja), followed by a nod to ENTER
  3. Specify the size in gigabytes (or the amount of space in gigabytes) and press ENTER.

You may create even more parties if you follow the instructions in the next section.

  • There are several unsavory characters who appear throughout the Ubuntu installation process.

IMPORTANT: You will want at least 20 GB of disk space for your Ubuntu installation partition.

  1. SelecteerFinish partitioning and write changes to disk(Finish partitioning and write modifications to disk)
  2. SelecteerFinish partitioning and write changes to disk(Finish partitioning and write changes to disk)
  3. SelecteerFinish partitioning and write changes to disk Install Now by selecting it from the drop-down menu (Nu installeren). You will not be able to cancel the installation after this point
  4. You will be required to complete a few configuration settings. ‘Waar bent u?’ is a question that has been raised in the past.
  1. Click on Doorgaan after selecting the closest nearby location on the map or entering it in the text box of the tekstvak

OPMERKING:If you are unsure about the nature of your indeling, you may now pick the knopToetsenbordindelingdetecterenselecteren for assistance.

  1. Het venster heeft het venster heeft het venster What is your name? The term “weergegeven” is used. You wish to submit your information at this time.
  1. During the installation of the besturings system, you will see a number of different schermafbeeldings on the screen. They provide you with further information on the Ubuntu-revision that you have installed on your PC.
  1. When the installatiewizard is completed, the berichtvensterInstallation complete appears on the screen. In order for your computer to start up again, select Restart Now(Nu opnieuw opstarten) from the Start menu.

De opstartvolgorde configureren

The computer starts up automatically in the GRUB-menu and remains there for 10 seconds while you select the besturingssystem you want to use to start up the machine. Ubuntu 16.04 of Windows 8 tot 10 is available. Ubuntu is installed as a standard besturingssystem when the computer is first booted up. When you press the Enter key or wait for more than 10 seconds, the system will begin to boot into the Ubuntu desktop. After Ubuntu has been downloaded and installed, you may sign in using the previously entered user name and password.

When you click on the Windows volume icon, it means that you have access to the information and files contained within the Windows-partitions.

For further information on the first installation, please see the following guide: Getting Started OPMERKING:If you have completed the installation but are experiencing difficulties, you can solve the problem the quickest and most easily by re-starting the installation.

Extra informatie

07th of October, 2021

Dit artikel beoordelen

There will be no special tekens included in the following observations:()

Leave a Comment

Your email address will not be published. Required fields are marked *