How To Exit Safe Mode Windows 10

Contents

3 Ways to Exit Safe Mode in Windows 10

How to»How to»How to Exiting Safe Mode in Windows 10 may be accomplished in three ways. When you start Windows 10 in Safe Mode, you have the ability to identify and solve computer problems. Exiting Safe Mode in Windows 10 may be accomplished in one of three ways, which are detailed below. In most cases, you should be able to exit Safe Mode by simply restarting your computer once you have finished troubleshooting problems on your computer while in Safe Mode. If, however, this does not occur, you will need to manually exit Safe Mode by using the Command Prompt or the Shift Key Restart technique.

1. Exit Safe Mode Using System Configuration

If your computer is continuously booting into Safe Mode, you will need to utilize the System Configuration screen to exit Safe Mode, which can be found on the Start menu. 1.Right-click on the Start button and select Run from the context menu. Note: You may also access the Run Command Window by pressing the Win + R keys simultaneously. 2.In the Run Command Window, run the command msconfig and press the Enter key. Choose the Boot tab from the System Configuration screen, uncheck the Safe Boot option, and then click OK.

When the computer is restarted, it will exit Safe Mode and return to normal operation.

2. Exit Safe Mode Using Command Prompt

Exiting Safe Mode using Command Prompt may be accomplished by following the procedures outlined below. 1.Right-click on the Start button and select Command Prompt from the context menu (Admin). Enter the command bcdedit /deletevaluesafeboot into the Command prompt box on your computer’s keyboard and hit Enter. 3.Restart your computer, and it will be brought out of Safe Mode automatically.

3. Restart With Shift Key

An alternative method of exiting Safe Mode is to restart your computer while pressing and holding the Shift Key simultaneously. 1.Start your computer by pressing and holding down the Shift Key (on your keyboard). 2.On the following page, select the Troubleshoot option. 3.After that, select Advanced options. To access the Startup Settings, click onRestart. The computer will restart with a variety of starting choices; hit the Enter key to exit Safe Mode. 5.

  • When using Windows 10’s Safe Mode, you may enable it by using the F8 key. What is the procedure for creating a Windows 10 password reset disk?

How to Exit Safe Mode on Windows 10

Windows 10 in safe mode is recommended if you are having problems starting the operating system normally and need to perform some troubleshooting. When you’re through using safe mode and wish to resume normal operation of your computer, follow these steps.

What Is Safe Mode?

It is simply a debugging mode for your computer. In the event that you’re running insecure device drivers that are causing you to see the blue screen of death or if your computer has been infected with malware, booting up Windows 10 in safe mode allows you to identify and resolve the source of the problem. In certain circumstances, it may be the only method to get your computer to boot up without having to reinstall Windows. Why? Because when you start Windows 10 in safe mode, startup applications and other services that are configured to start on startup aren’t started, hardware support is minimized, screen resolution is reduced, and no third-party software or drivers are enabled, this is the recommended method.

In safe mode, you may restore drivers to their previous versions, examine system logs, and uninstall applications that may be creating problems. IN CONNECTION WITH:How to Perform a Clean Boot in Windows

How to Exit Safe Mode on Windows 10

Restarting your Windows computer will allow you to exit safe mode without any additional steps. This may be accomplished by selecting “Start” from the “Start” menu in the bottom-left corner of the screen, then “Power” and finally “Restart.” Restarting your computer may be accomplished in a variety of ways, including by typing shutdown /r from the Command Prompt. Regardless of the option you use, you’ll be requested to restart your computer and start Windows 10 as normal. You may also restart normally without having to go through the prompts.

Once the window is open, type “msconfig” in the text box next to “Open” and click “OK.” Once the window is closed, click “OK.” In the pop-up box that displays, select the “Boot” tab.

When you restart your computer, you will no longer be interrupted by the prompt.

Start your PC in safe mode in Windows

Safe mode begins Windows in a minimal form, with just a small number of files and drivers loaded. If a problem does not occur in safe mode, this indicates that the issue is not being caused by the system’s default settings or basic device drivers. It is possible to troubleshoot problems on your computer while Windows is running in safe mode, and this might help you narrow down the cause of the problem. Safe Mode is available in two flavors: Safe Mode without Networking and Safe Mode with Networking.

Please choose one of the following sections to learn how to start your computer in safe mode from the Settings menu, the sign-in screen, a black or blank screen, or any other screen.

  1. To enter the Settings menu, press the Windows logo key plus I on your keyboard. If it doesn’t work, press the Start button, then click Settings
  2. Then select SystemRecovery from the drop-down menu. Open the Recovery Configurations
  3. Select Restart now from the Recovery options menu, which is located next to Advanced startup. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  4. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in Safe Mode by selecting4or pressingF4. Alternatively, if you will be need internet access, select5or pressF5for Safe Mode with Networking

You can restart your device from the Windows sign-in screen if you are unable to access Settings in order to enter safe mode.

  1. When you get to the Windows sign-in screen, hold down the Shift key while selecting the PowerRestart option. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  2. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in safe mode by selecting4orF4. Alternatively, if you may need to connect to the internet, choose5orF5for Safe Mode with Networking.

Remember that if you’ve encrypted your device, you’ll need your BitLocker key in order to boot into safe mode. You must first access the Windows Recovery Environment (WRE) before you can boot into safe mode (winRE). To accomplish this, you will need to continuously switch your device off and then back on:

  1. If you want to switch off your device, press and hold the power button for 10 seconds. To turn on your smartphone, press the power button a second time. Hold down the power button for 10 seconds when you see the first indication that Windows has begun (for example, some devices display the manufacturer’s logo when resuming) to switch off your device. To turn on your smartphone, press the power button a second time. Keep holding down the power button for 10 seconds after Windows has restarted in order to switch off your device. To turn on your smartphone, press the power button a second time. To enter winRE, allow your device to restart into Automatic Repair mode and then choose Advanced options from the menu bar.

To switch off your smartphone, press and hold the power button for 10 seconds. To turn on your smartphone, press the power button once more. To switch off your device, hold down the power button for 10 seconds when you see the first indication that Windows has begun (for example, some devices display the manufacturer’s logo after resuming); To turn on your smartphone, press the power button once more. Hold down the power button for 10 seconds after Windows has restarted to switch off your device.

To enter winRE, let your device to restart into Automatic Repair and then selectAdvanced options from the menu bar.

  1. Advanced options can be found on the Choose an option screen by selecting TroubleshootAdvanced options. Preferences for the first time After your device has restarted, you’ll be presented with a menu of options. Safe Mode with Networking can be accessed by selecting option5 from the list or by pressing F5.

To learn more about troubleshooting a black or blank screen issue, read Troubleshooting black or blank screen errors (PDF).

  1. To enter the Settings menu, press the Windows logo key plus I on your keyboard. If it doesn’t work, try selecting the Start button, then selecting Settings
  2. Then selecting UpdateSecurityRecovery from the drop-down menu. Open the Recovery Configurations
  3. Select Restart now from the Advanced startup drop-down menu. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  4. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in Safe Mode by selecting4or pressingF4. Alternatively, if you will be need internet access, select5or pressF5for Safe Mode with Networking

You can restart your device from the Windows sign-in screen if you are unable to access Settings in order to enter safe mode.

  1. When you get to the Windows sign-in screen, hold down the Shift key while selecting the PowerRestart option. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  2. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in safe mode by selecting4orF4. Alternatively, if you may need to connect to the internet, choose5orF5for Safe Mode with Networking.

Remember that if you’ve encrypted your device, you’ll need your BitLocker key in order to boot into safe mode. You must first access the Windows Recovery Environment (WRE) before you can boot into safe mode (winRE). To accomplish this, you will need to continuously switch your device off and then back on:

  1. If you want to switch off your device, press and hold the power button for 10 seconds. To turn on your smartphone, press the power button a second time. Hold down the power button for 10 seconds when you see the first indication that Windows has begun (for example, some devices display the manufacturer’s logo when resuming) to switch off your device. To turn on your smartphone, press the power button a second time. Keep holding down the power button for 10 seconds after Windows has restarted in order to switch off your device. To turn on your smartphone, press the power button a second time. Allow for a complete reset of your device. You will be able to enter winRE

The following steps will guide you through the process of entering safe mode while you are in winRE:

  1. Advanced options may be found on the Choose an option screen by selecting TroubleshootAdvanced options. Preferences for the first time After your device has restarted, you’ll be presented with a menu of alternatives. Safe Mode with Networking may be accessed by selecting option5 from the list or by pressing F5.
You might be interested:  How To Set A Program To High Priority Windows 10

To learn more about troubleshooting a black or blank screen issue, read Troubleshooting black or blank screen errors (PDF). Remember that restarting your device should be sufficient to get you out of Safe Mode and back into regular operation. In the event that for some reason your system continues to boot into Safe Mode on its own after restarting, attempt the following steps:

  1. Enter msconfig in the Openbox by pressing the Windows logokey plus R
  2. Then click OK. Select the Boot tab from the drop-down menu. Clear the Safe boot checkbox in the Boot settings section.

How to start Windows 10 in Safe Mode and then exit later

  • A feature of Windows 10 called Safe Mode allows you to boot your computer into a state where most of its non-essential capabilities are deactivated. It is recommended that you boot into Safe Mode when you are debugging a problem or when Windows 10 would not start properly. For instructions on how to exit Safe Mode, go to the “Boot options” menu or just restart your computer. More stories may be found in Insider’s Tech Reference collection
  • Click here.

Safe Mode is a feature that is included in nearly every version of Windows. This allows you to start your computer with only the files and drivers that are absolutely necessary for it to function – most unnecessary features will be disabled, and programs will run more slowly as a result. By default, you will not even have access to the internet. Safe Mode, on the other hand, is not intended to be utilized on a regular basis. It is necessary to utilize Safe Mode when your computer is not functioning properly or when it will not begin to boot up at all.

Here’s how to start your computer in Safe Mode and then exit it when you’re finished.

How to boot in Safe Mode in Windows 10

There are several methods for entering Safe Mode, however the following are the three simplest.

Using the Power icon

If you’re logged in, you may do the following: 1.Click on the Windows symbol in the lower-left corner of the screen. 2.While holding down the Shift key, choose the Power symbol and then select Restart from the menu. While pressing the “Restart” button, keep the Shift key pressed. Insider photo courtesy of William Antonelli 3. You will be presented with a blue screen titled Choose a choice when your computer has restarted. SelectTroubleshoot, followed by Advanced options to complete the process.

  • Dave Johnson of Business Insider has contributed to this article.
  • Start by selecting Startup Settings and then Restarting your computer.
  • When you arrive to the final selection menu for Safe Mode, pick “Startup Settings” and then click Restart to go to the next screen.
  • When the screen returns, you’ll be presented with a number of alternatives.

Safe Mode may be used with or without internet connectivity. Insider photo courtesy of William Antonelli If you aren’t already logged in, follow the steps above but instead click the Power symbol on the sign-in page.

Using the Settings app

1.Open the Settings application by hitting the Windows key + I simultaneously. 2.Click on UpdateSecurity, followed by Recovery. 3.On this page, beneath the heading Advanced startup, select the button labeled Restart now. To enter Safe Mode, select “Restart immediately” from the menu bar. Dave Johnson of Business Insider has contributed to this article. Upon restarting, your computer will display the Choose an option screen. In this section, selectTroubleshoot and then Advanced options. Start by selecting Startup Settings and then Restarting the computer.

Alternatively, press4 to boot your computer into Safe Mode, or5 to boot your computer into Safe Mode with internet access.

Holding down the power button

If you are unable to boot into Windows normally, this is the procedure to follow. 1.To turn on your computer, press the power button on the keyboard. Keep holding down the power button until you see anything on the screen — most likely the manufacturer’s emblem — at which point the computer will shut down. Turn on your computer once you have completed this step three times. Towards the bottom of the screen, the wordsPreparing Automatic Repairwill display as the process gets underway. Continue to allow your computer to go through this procedure; it should ultimately boot into the Choose an option screen.

Insider4 photo courtesy of William Antonelli.

When asked, select the option to Restart.

6.

How to exit Safe Mode

Exiting Safe Mode can be accomplished in one of two ways. The first — and most straightforward — solution is to just restart your computer. This may be accomplished by pressing and holding the power button or by selecting it from the Start menu. If you’ve rebooted your computer but it’s still in Safe Mode, you should do one of the following things. 1.To enter the Run menu, press the Windows key + R at the same time. 2.In the text field, typemsconfigand hit the Enter button. In Safe Mode, the Run command should still be accessible.

  1. 4.UnderBoot settings, make sure that the Safe boot option is not selected.
  2. The menu that you are searching for should look somewhat like this.
  3. Business Insider photo courtesy of Ross James Tech Reference’s William Antonelli is the editor and a staff writer.
  4. A founding member of the Reference team, he has contributed to the growth of Tech Reference from its humble beginnings into a behemoth that receives more than 20 million visits every month.
  5. On news networks such as Newsy, Cheddar, and NewsNation, he is also a go-to source for technology insight.
  6. Dave Johnson is a free-lance writer based in New York City.
  7. Dave grew up in New Jersey before joining the Air Force, where he worked as a satellite operator, space operations instructor, and space launch planning specialist.
  8. A photographer who has shot wolves in their natural surroundings, Dave is also a dive instructor and the co-host of many podcasts, all of which can be found on his website.

Besides being the author of more than a dozen books, Dave also contributes to a variety of websites and magazines such as CNET, Forbes, PC World, How To Geek, and the Insider magazine. Ross James is a Business Insider contributor who works as a freelance writer.

How to Get Out of Safe Mode in Windows 10

  • Start by going to the Start menu, selecting the power button, and selecting Restart
  • Press the keys Ctrl+Alt+Del and then findRestartby pressing the power button. Uncheck the box labeled “Safe boot” in the System Configuration utility.

This article explains how to exit Safe Mode on Windows 10 and what to do next. There are various methods for exiting Safe Mode and returning to Normal Mode, but the option you choose will be determined by how you entered Safe Mode in the first place.

How to Exit Safe Mode From the Desktop

There are several distinct ways to boot into Safe Mode, and there are also different ways to exit Safe Mode. Typically, you’ll be at your computer’s desktop when you notice the “Safe Mode” letters in the corners of a black backdrop. The process of exiting Safe Mode in this case can be accomplished in a variety of ways, depending on how you got there in the first place. If you utilized Shift+Restart or theAdvanced startup option in Settings, or if you’re not sure how you wound up in Safe Mode in the first place, the quickest and most straightforward solution is to restart Windows normally:

  1. Start by selecting Start from the Start menu. If you’re on the lock screen and thus don’t have access to the desktop, you may still quit Safe Mode without signing in by pressing the power button on the right and selectingRestart from the drop-down menu. However, if this does not function in the majority of cases, you’ll need to sign in and follow the instructions provided further down. Select the power button in the bottom-left corner of the screen
  2. Then select Restart.

In most circumstances, a reboot should resolve the issue; but, if you find yourself in a booting into Safe Mode cycle that you can’t get out of, it’s likely that you got there by altering a setting in the System Configuration program, which remains in effect even after a reboot. In this circumstance, returning to the themsconfigtool and removing theSafe bootoption will let you to leave Safe Mode:

  1. To launch the Run dialog box, press WIN+R at the same time. Enter the command msconfig and then press Enter or OK. Enter the Boottab and uncheck the Safe boot option. If you get a prompt, chooseRestartif you want to restart the computer normally. If you don’t see a prompt, chooseOK.

How to Exit Safe Mode With Command Prompt

Alternatively, if you booted into Safe Mode with Command Prompt and all you see is the Command Prompt window, you have two choices: Alternatively, press Ctrl+Alt+Deland, then choose the power button followed byRestart, or follow the instructions below to restart your computer.

  1. Shutdown /r
  2. Type the following into the Command Prompt box: To submit the command, press the Enter key. The operating system will reboot for a brief period of time, exiting Safe Mode in the process. If you are forced to restart your computer in Safe Mode, follow the procedures below:

In addition to using thebcdeditcommand from a Windows installation disc, you may also enter Safe Mode by selectingAlternate shellin the System Configuration tool. In the event that you entered Safe Mode using one of those techniques, the restart command will not be sufficient to escape it. Instead, to prevent your machine from booting into Safe Mode, type the following into the Command Prompt: bcdedit /deletevaluesafeboot is a command-line tool. After hitting Enter, you’ll get a notification stating that the task has been done successfully.

Either of these options will exit Safe Mode and return you to Normal Mode.

  • What is the best way to exit Safe Mode in Windows 10 without entering a password? The Shift+Restartcombination will allow you to access Advanced Startup Options and the Command Prompt if the restart button does not return you to your previous state. Following that, you may proceed with the Command Prompt procedures indicated above. Assuming the problem is due to a lost password, you can reset your Microsoft account password (or use a password reset disk, if you have one) or use a password reset disk to reset your password. What is the best way to bring a Dell laptop running Windows 10 out of Safe Mode? The following techniques can be used to exit Safe Mode on Dell laptops running Windows 10: logging out and logging back in again
  • Rebooting the device from the login screen
  • Or using the Command Prompt.

Thank you for informing us about this!

How to Exit Safe Mode on Windows 10

Windows 10’s safe mode is one of the diagnostic modes available (and any other version of Windows). When your Windows 10 computer is in safe mode, the operating system is configured to function with the bare minimum of drivers and services available. It is possible to start your computer in safe mode in order to troubleshoot problems with your operating system or with your apps. You may exit safe mode by simply restarting your computer when you have finished troubleshooting the problem. However, things are not always as straightforward as that.

After they have started their computer in safe mode, they will not be able to switch back to regular mode.

This is quite inconvenient and even a little frightening.

And you may be frantically attempting to come up with a solution.

The solutions listed below have been shown to be effective in assisting many Windows 10 users to leave safe mode. It may possibly be of assistance to you. Simply give it a shot. Method 1: Disable safe booting in the System Configuration menu. Method 2: Using the Command Prompt, delete the safe boot.

Method 1: Turn off safe boot in System Configuration

Because the safe boot option in System Configuration is activated, it is possible that you will become trapped in safe mode. You can disable that setting and see if you can bring your computer out of safe mode on its own. To switch off safe boot, do the following: 1) To open the Run dialog box, simultaneously press the Windows logo key and the R key on your keyboard. 2)In the Run dialog box, type “msconfig” and click the Enter key on your keyboard to launch the program. System Configuration will be opened as a result of this.

After that, press the OK button.

If this method works for you, your computer will exit safe mode and resume in regular mode after a short period of time.

Method 2: Delete safe boot using Command Prompt

Delete the safe boot element from the boot settings of your machine is another approach you might try to exit safe mode. This can also prevent your computer from booting into safe mode when you first turn it on. This is something that has to be done in Command Prompt. To do so, follow these steps: 1) To open the Run dialog box, simultaneously press the Windows logo key and the R key on your keyboard. Enter “cmd” in the Run dialog box and click Enter on your keyboard to launch the command prompt.

In the Command Prompt, input the command line below and click Enter on your keyboard to complete the process (this will delete the safe boot element).

4)Press the Enter key after typing the command line below (this will reboot your computer after a while).

Windows 10 security: How to exit Safe Mode in Windows 10 – how to use Safe Mode

Sign up forFREE to receive the latest news, reviews, and tech hacks from the greatest names in entertainment. Invalid email address We use the information you submit about yourself to serve you with material in ways that you have consented to and to enhance our knowledge of you. This may contain advertisements from us as well as advertisements from third parties depending on our understanding. You have the option to unsubscribe at any time. For further information, please see the following link: Ransomware and malware are on the rise, which means that Windows 10 users must be on the lookout for threats in order to secure their data.

Safe Mode is one of the options available, and it is meant to assist in the resolution of the vast majority of problems with Microsoft Windows 10.

How to enter Windows 10 Safe Mode:

Safe Mode is configured to load with the bare minimum of drivers, software, and services. When Windows 10 does not start normally, Safe Mode should be able to be launched without issue. Safe Mode is a handy tool for troubleshooting any issues that may arise. Begin the procedure to confirm that your computer has been properly shut down. MORE INFORMATION CAN BE FOUND AT: Which antivirus program is the most effective for Windows 10? Safe Mode is a feature of Windows 10 that disables unwanted drivers and apps during the starting process (Image: Microsoft) Windows 10: Safe Mode can assist you in resolving the majority of Windows 10 issues.

You might be interested:  How To Make Windows 10 Look Like Windows 7

Continue in this manner until the message Preparing Automatic Repair displays twice more.

Select Advanced options from the drop-down menu, and the machine will launch the Windows Recovery Environment.

Ransomware and malware are becoming increasingly prevalent on Windows 10. (Image: Getty) Windows 10: The operating system has the ability to attempt to resolve some issues on its own (Image: Microsoft)

How to exit Windows 10 Safe Mode:

If you want to escape Safe Mode, open the System Configuration utility by selecting Run from the Start menu. It is possible to use the keyboard shortcut (Windows key + R) and typemsconfigthen Ok. Tap or click the Boot tab, uncheck the Safe boot box, hit Apply, and then click Ok to save your changes. After that, restarting your computer will force Windows 10 Safe Mode to be exited.

PC stuck and cannot exit Safe Mode in Windows 11/10

This guide will assist you if you find that your PC has become stuck in Safe Mode and you are unable to exit Safe Mode on Windows 10/8/Windows 7 at all. In order to diagnose or debug Windows problems, we frequently boot into Safe Mode. This is because when you start Windows in Safe Mode, the operating system only loads the bare minimum of drivers, files, and apps that are essential for the operating system to function. What do you do if you discover that you are unable to exit Safe Mode, and that every time you restart your computer, you are thrust back into Safe Mode!

As a result, let’s take a look at how to get out of or leave Windows Safe Mode.

Cannot exit Safe Mode in Windows 11/10

1] To open the Runbox when in Safe Mode, press the Win+R keys together. To access the System Configuration Utility, type msconfig and press Enter on your keyboard. Make sure that the Normal starting option is chosen under the General tab. In the Boot tab, make sure that the Safe Bootoption is unchecked under the Boot choices section before proceeding. Restart your computer once you have clicked on Apply/OK. This should be of assistance to you! 2] If it does not, then go to the next step. To open the Runbox when in Safe Mode, press the Win+R key combination.

  1. This will launch a Command Prompt with elevated privileges.
  2. When you run the BCDEdit /deletevalue command, it will delete or remove a boot entry option (as well as its value) from the Windows boot configuration data store (BCD).
  3. For this purpose, open up a Command Prompt elevated to the elevated command prompt and type the following:bcdedit /deletevaluesafeboot After that, restart your computer and check to see whether it has booted into Normal Mode.
  4. If your Safe Mode is not functioning, please see this post.
  5. Anand Khanse is the administrator of TheWindowsClub.com.

Please take the time to read the full post. first, build a System Restore Point before making any modifications to your system, as stated in the comments When installing freeware, be cautious of any third-party offers that may appear.

How to enter or boot to Safe Mode in Windows 7, 8, 8.1, and 10 – Lenovo Support LU

+Lenovo Facts and Figures

  • Information about our company, news, investor relations, sustainability, product compliance, product security, Lenovo Open Source, legal information, and job opportunities.

Shop

  • LaptopsUltrabooks
  • sTablets
  • sDesktopsAll-in-Ones
  • sWorkstations
  • sAccessories Software, servers, storage, networking, laptop deals, and an outlet are all available.

Support

  • Resources for Imaging and Security
  • How-Tos
  • Warranty Lookup
  • Parts Lookup
  • Contact Us
  • Repair Status Check
  • Imaging and Security
  • DriversSoftware

Resources

+Resources

  • The following sections are available: Where to Buy, Shopping Assistance, Sales Order Status, Product Specifications (PSREF), Blogs, Forums, Registration, Product Accessibility, Environmental Information, Gaming Community, LenovoEDU Community, LenovoPRO Community, and LenovoPRO Community

How to Turn Safe Mode off in Windows 11 and Windows 10

What exactly is safe mode? The Safe Mode feature in Windows 11 / Windows 10 is a handy debugging tool that may be used in instances where your computer is unable to boot normally. By starting your system with a limited set of features and drivers, you will be able to resolve issues that you would not have been able to otherwise. However, if you were forced to live with this limited feature set, it would be a big problem for your health and well-being. That’s why we’re going to teach you today how to exit safe mode in Windows 11 / Windows 10 using the command prompt.

In the absence of an underlying problem with your computer, it will restore your computer to its previous state of operation.

If you don’t, you’ll probably wind up needing to restart your computer in safe mode again.

If nothing else is wrong with your computer, hitting the restart button should give you the choice to restart Windows 11 in its default configuration.

  1. Start by selecting “Start” from the Start menu, pressing the power button in the bottom-right corner, and selecting “Restart.” That’s all there is to it. As long as your operating system does not include any major problems, you will be able to resume normal operations from that point. For whatever reason you are unable to reach the Start menu, you may always use the shutdown /rcommand in Command Prompt instead

How To Turn off Safe Mode via System Configuration Settings

Safe mode may be turned off in Windows 11 / Windows 10 without the need for any further prompts by unticking the box in the system configuration menu. Here’s how you can go about it:

  1. Alternatively, press “Windows + R,” type “msconfig,” then hit “OK.” Open the “Boot” tab and uncheck the “Safe boot” box before pressing “OK.” When you restart your computer, it will immediately exit safe mode, allowing you to resume regular use of your computer.

How to Start Windows 11 / Windows 10 in Safe Mode

If you want to boot back into safe mode at a later time, you may simply reverse the procedure described in the preceding subsection. If you are unable to use the system configuration tool, you may learn more about how to boot in safe mode by reading our comprehensive tutorial, which includes various alternative approaches.

How to Perform a Clean Boot in Windows 11 and Windows 10

In the future, you should consider learning how to execute a clean boot, rather than booting into safe mode, in order to save time. The ability to fix starting services and drivers without having to disable key Windows services is a significant advantage.

How to boot into & exit Safe Mode on Windows 10 (step by step)

When the system behavior has changed so drastically that it is difficult to work with, Safe Mode may be a very valuable tool for diagnosing your Windows PC. In many cases, while working on your computer, you may come across scenarios in which you will download ransomware/malware that is disguised as security software from the internet and finally become a victim of rogue software. A damaged driver that you just installed, only to discover that you are no longer able to connect to the internet, is an example of a straightforward problem.

In Safe Mode, only the most essential components of a computer are loaded, and as a result, the operating system has a restricted level of capability that is only transitory in nature, but extremely useful when it comes to isolating and repairing problems.

In Safe Mode, there are two options: Safe Mode without Networking and Safe Mode with Networking.

Following this thought process, we will examine how to boot into Safe Mode on a Windows 10 computer.

1. From Settings

  1. To enter the Settings menu, press the Win Key + I combination. (Alternatively, you may click Start and then selectSettings.) SelectUpdatesecurityRecovery
  2. Select Restart now from the Advanced startup drop-down menu. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Settings for the startup processRestart
  3. When you restart your computer, you’ll be presented with a menu of alternatives. Press F4 to start your computer in Safe Mode, or F5 to start your computer in Safe Mode with Networking.

2. From the sign-in screen

  1. Restart your computer. Maintaining the Shift key depressed while selecting PowerRestart will allow you to restart your computer after you have signed in. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Settings for the startup processRestart
  2. When you restart your computer, you’ll be presented with a menu of alternatives. To start your computer in Safe Mode, use the F4 key. Alternatively, press F5 to enter Safe Mode with Networking.

With Safe Mode, you can virtually pinpoint the source of the problem and securely uninstall any malicious software that is interfering with the operation of the system. In this case, if the problem does not manifest itself in safe mode, you will know immediately that the default settings and basic device drivers are not the source of the problem.

How to exit Safe Mode:

For whatever reason, your computer may be running in safe mode, and you wish to exit it. Here are some simple steps to take to do so. Step 1: Type run into the search box and then click on the “Run” desktop application, as seen in the following image. A run box will appear on the screen. Now type “msconfig” in the Run box and press the Enter key to proceed. To complete the third step, a popup screen with the “System Configuration” menu will appear. If you navigate to the boot tab, you will notice that the “Safe Boot” option has been selected.

Fix – Unable to Exit Safe mode in Windows 11

Booting Windows 11 in Safe mode is one of the most effective ways to fix difficulties on your Windows 11 computer, and it is something you should do. Using Safe Mode, the machine boots into Windows 11 with only the most basic functions enabled, making it easier for users to identify which driver or third-party software is causing the problem. To escape safe mode, you must do a fast restart on your computer. Although it is common to be unable to leave safe mode in Windows 11, this is not always the case.

They will notice that whenever they restart their computer, the system will load in Safe Manner rather to the standard mode.

Several options for exiting safe mode in Windows 11 will be discussed in this blog article.

Fix – Unable to Exit Safe mode in Windows 11

The Task Manager may be launched by executing the CTRL + SHIFT + ESC key combination. In the Task Manager, select FileNewRun new task from the drop-down menu. In this box, type’systemconfig’and press Enter. In this case, the System configuration will be launched. It is necessary to switch to theBoottab at this point. Now navigate to theBoot option area of the menu. Check that the Safe boot option is not selected, and if it is, uncheck it before clicking Apply and OK. It is necessary to restart your computer in order to exit safe mode and allow your computer to load into standard Windows 11 mode.

When the User Account Control dialog box displays, select Yes to proceed.

After you’ve finished, restart your computer.

I hope this information was useful in getting you out of safe mode on Windows 11.

If you have any other suggestions for how to resolve the problem, please feel free to share them with us in the comments section below. Himachali, Mechanical Engineer, Snooker enthusiast, avid Scotch drinker, traveler, and webmaster are just a few of my interests. (

How to get out of Windows Safe Mode

In order to correct the situation, you must boot into Safe Mode. As a result, it is not acceptable when Safe Mode is the issue that has to be addressed. The problem with your Windows PC is that it will not stop booting into Safe Mode unless you identify the source of the problem. What prompted you to boot your computer into Safe Mode in the first place? I’m assuming you did that on purpose, but how did you do it? The problem is that you did it using the System Configuration tool, which is your fault.

  1. This brings up the System Configuration window.
  2. Uncheck the Safe boot option if it is currently selected.
  3. For the sake of future reference, avoid entering Safe Mode through System Configuration unless you have a compelling need to do so on a regular basis in your environment.
  4. Make sure the Safe bootoption is checked before proceeding.
  5. The method you use to accomplish this may vary depending on your Windows version and the age of your computer.
  6. When theAdvanced Boot Optionsmenu appears, pick the option that says “Start Windows Normally.” This may also work on certain Windows 8 computers, as well as those that have been updated to Windows 10.
  7. When you get to the Shutdown option, hold down the Shift key as you selectRestart.
  8. Startup PreferencesRestart the computer.
  9. As a substitute for launching Windows, it will display a Startup Settings screen, which will have several configuration settings.

How To Exit Safe Mode On Windows 10

Despite the fact that our computers are far from ideal devices, software such as Windows can occasionally experience a variety of problems. Sometimes the solution is straightforward, and other times it may be more difficult to pinpoint the source of the problem. As a result, it is occasionally suggested that users boot into Safe Mode on their Windows computers. Safe mode, for those who are unfamiliar with the term, is a Windows setting that puts your computer into the most basic and barebones version of the operating system.

It is beneficial, but what happens when you are finished utilizing Safe Mode?

How to exit Safe Mode on Windows

When you want to go out of Safe Mode on Windows, the easiest and most successful method is to just restart your computer. You may be offered the choice to ” Start Windows Normally ” when you restart your computer, which you should pick in order to prevent your machine from automatically launching into Safe Mode.

Nonetheless, if for some reason this does not function, and you find yourself in Safe Mode once more, don’t panic because there is actually another way to get you out of it.

  1. To bring up the ” Run ” tool, press the Windows logo key and R at the same time. Input the command msconfig and press Enter or click OK
  2. Select the Boot tab from the drop-down menu. Clear the Safe boot checkbox in the Boot settings section, then click OK. Restart your computer to get things going again. If everything goes as planned, you should be back in standard Windows 10 mode.

I’ve filed it away. More information about Microsoft, Windows, and Windows 10 may be found here.

How to boot in Safe Mode: Windows 10, 8, 7 & Mac

You try to use your Mac® or PC, but it keeps crashing and won’t properly boot up. What should you do? What should you do in this situation? It’s possible that you’ll need to start your computer in Safe Mode, which stands for “Safe Mode with Networking.” It is simple to accomplish this. When technology fails, we at Asurion are here to help—whether your laptop’s sound isn’t working or its battery isn’t charging properly. In this article, we’ll explain why you might need to boot your Mac or WindowsTM PC into Safe Mode, as well as how to do so.

You might be interested:  How To Get To Control Panel Windows 10

What is Safe Mode?

Safe Mode is a method of turning on and using your computer while only using the bare minimum of files and device drivers. Please don’t be concerned if your screen resolution is reduced or your computer is slower than usual; this is completely normal.

When do you need Safe Mode?

If you’re having trouble with your computer, booting it up in Safe Mode can assist you in identifying the source of the problem. You may wish to activate Safe Mode if any of the following situations apply:

  • Your computer is always crashing
  • You are unable to launch your operating system (OS) or it has become unstable. Following the installation of a new software, your computer is behaving abnormally. Your computer has been infected with malware, a virus, or has corrupt files on it.

Despite your efforts, your computer continues to crash. You are unable to start your operating system (OS) or the OS is unstable. The installation of a new software has resulted in your computer behaving abnormally. Viruses or malware have infected or corrupted the files on your computer.

How to start in Safe Mode on Windows 8.1 and Windows 10

  1. Select the Power icon from the Start menu by pressing the Start button twice. Continue to hold down the Shift key while clicking Restart
  2. Select TroubleshootAdvanced OptionsStartup Settings from the drop-down menu
  3. Then press the Restart button. Your computer will restart as a result of this. Select Safe Mode from the menu that opens by pressing 4, or Safe Mode with Networking by pressing 5, which allows you to connect to the Internet.

How to start in Safe Mode on Windows 7

  1. Restart or turn on your computer if necessary. Continue to hold down the F8 key until the Windows logo shows while the program is launching. As soon as the menu opens, press and hold the F8 key. Highlight Safe Mode or Safe Mode with Networking (to enable Internet access) with the arrow keys on your keyboard. Enter the keystrokes

How to start a Mac in Safe Mode

  1. Restart your Mac after it has been completely shut down (do not restart it). After that, wait around 10 seconds. To turn it on, press and hold the power button for a few seconds before pressing and holding the Shift key. Remove your finger from the Shift key when the login window displays.

How to exit Safe Mode on a Windows PC or Mac

To exit Safe Mode, restart your computer in the conventional manner. You should be able to utilize all of the features on your system as a result of this.

How to troubleshoot your computer while in Safe Mode

Once Safe Mode has been activated, the following are three popular approaches for identifying your problem:

  1. To eliminate malware or a virus that may have infected your computer, launch an antivirus application. Uninstall any new apps that have been installed
  2. Make sure your drivers are up to date. Essentially, they are software files that enable the operating system and hardware devices to communicate with one another.

Check to determine whether your troubleshooting was successful once your computer has been rebooted and restored to regular mode.

Still having issues?

A single, easy plan that covers all of your favorite home technology will keep the gadgets your family enjoys and depends on safe and secure. Computers, TVs, tablets, luxury headphones, smart gadgets, and much more are covered by Asurion Home+, which also includes 24/7 help for your entire family with any tech care needs—all for less than $1/day. Learn more about Asurion Home+ coverage and how you can benefit from device protection that gives you peace of mind. * It is the property of Asurion, LLC to use the trademarks and logos of the company Asurion®.

Otherwise, all trademarks and service marks are the property of their respective owners.

DISSEMBLE THIS ARTICLE

Question: How To Get Out Of Safe Mode Windows 10 Without Password?

How can I turn off Safe Mode without having to in into my Windows account?

  • Start your computer by booting it from the Windows installation DVD and pressing any key that appears when requested
  • To launch a Command Prompt when you see Windows Setup, hold down the Shift and F10 keys at the same time. To switch off Safe Mode, use the following command and press Enter:
  • Close the Command Prompt and terminate Windows Setup once it is completed.

How do I get my Windows 10 computer out of safe mode?

To leave Safe Mode, launch the System Configuration tool by pressing the Windows key + R on the keyboard and type msconfig, followed by the Ok button.

2. Select the Boot tab from the menu bar by tapping or clicking it. Uncheck the Safe boot box, then hit Apply and then Ok. Safe mode will be exited by restarting your computer.

How do I disable password in safe mode?

How to Reset a Password in Safe Mode on a Windows Computer

  1. Boot into safe mode by selecting “Start” and then “Shutdown,” and then from the drop-down menu, select “Restart Computer” to begin the process. Keep holding down the F8 key until the Boot Menu appears after your computer’s screen has gone black. Access the system as an administrator by entering the administrator password in the “Password” column.

How do I disable safe mode in BIOS?

Then, select “Start” and type “msconfig” into the search box that appears. Deselect “Safe Boot” from the Boot Options drop-down menu and click “Apply.” You will still be able to access safe mode by pressing the “F8” key on your keyboard when the startup screen appears.

How do I disable safe mode with command prompt?

In Windows 10 / 8 / 7 / Vista, there are two options for exiting Safe Mode.

  • To bring up the Run box, press the Windows key + R at the same time. Type msconfig and hit the Enter key
  • When the System Configuration box appears, you’ll see that the Safe boot option is located under the Boot choices section
  • Click on it to activate it. If the Safe boot option is selected, your computer will continue to boot in Safe Mode. It is necessary to restart your computer in order for it to start in regular mode.

How do I get Windows 10 into safe mode?

Start Windows 10 in Safe Mode by pressing F8.

  1. Press In addition to restarting in Safe Mode if you have access to any of the Power choices indicated above, you may restart in Safe Mode by pressing the key on the keyboard while clicking Restart. Making use of the Start menu
  2. But hold on, there’s more. By pushing the button

How do I know if I am in safe mode Windows 10?

In Windows 10, you may start your computer in safe mode.

  • To enter the Settings menu, press the Windows logo key plus I on your keyboard. UpdateSecurityRecovery should be selected. Select Restart now from the Advanced startup drop-down menu. After your computer has restarted and you have reached the Choose an option screen, select TroubleshootAdvanced options from the drop-down menu. Settings for the startup processRestart
  • Following the restart of your computer, you’ll be presented with a menu of alternatives

How do I bypass the login screen on Windows 10?

Method 1: Use netplwiz to bypass the Windows 10 login screen.

  1. To open the Run box, press Win + R and type “netplwiz” into the box. Uncheck the box that says, “The user must provide a user name and password in order to access the computer.” Click Apply, and if a pop-up box appears, confirm the user account and enter its password
  2. Otherwise, click Cancel.

Does Safe Mode bypass password?

In the event that you forget the password to your normal account, you can log into the built-in Administrator account in Safe Mode and use Command Prompt to reset your lost password. Continue to hold down the F8 key while the machine is booting up until the Advanced Boot Options screen opens.

How do I exit Safe Mode on Windows 10?

If you want to escape Safe Mode, open the System Configuration utility by selecting Run from the Start menu. It is possible to use the keyboard shortcut (Windows key + R) and type msconfig, followed by the letter Ok. Tap or click the Boot tab, uncheck the Safe boot box, hit Apply, and then click Ok to save your changes. After that, restarting your computer will force Windows 10 Safe Mode to be exited.

How can I get out of safe mode?

How to disable safe mode on your Android smartphone

  • Step 1: Swipe down the Status bar or drag down the Notification bar to the bottom of the screen. 1st step: Press and hold the power button for three seconds. Step 1: Tap and drag the Notification bar to the bottom of the screen. Step 2: Select “Safe mode is enabled”
  • Step 3: Select “Safe mode is disabled.”

What does safe mode do?

A computer operating system’s safe mode is a diagnostic mode that may be used to diagnose problems (OS). A mode of operation by application software can also be referred to as a mode of operation. Safe mode in Windows allows just the most critical system apps and services to start up when the computer is booted. Safe mode is meant to assist in the resolution of the vast majority, if not all, of the issues that may arise inside an operating system.

How do I get to Safe Mode from command prompt?

Safe Mode with Command Prompt is the best way to get your computer up and running. During the computer’s startup process, press the F8 key on your keyboard several times until the Windows Advanced Options menu displays. Select Safe mode with Command Prompt from the list and hit ENTER to boot into Safe mode with Command Prompt.

How do I disable fast boot?

How to activate and disable quick startup on Windows 10 is covered in this article.

  1. Control Panel may be accessed by right-clicking the Start button, selecting Search, typing Control Panel, and pressing Enter on your keyboard. Choose what the power buttons do by selecting Power Options from the drop-down menu. Change any settings that are presently unavailable by clicking the Change button.

How do I get out of safe mode with command prompt?

Method 1: Disable safe booting in the System Configuration menu.

  • Enter “msconfig” in the Run dialog box and hit Enter on your keyboard to open the Microsoft Configuration Utility. Click the Boot tab in System Configuration and deselect the Safe boot option. 4) In the pop-up dialog box that appears, select Restart. Enter “cmd” in the Run dialog box and hit Enter on your keyboard to open the Command prompt window.

How do I turn off Safe Mode in Microsoft Outlook?

Start Outlook in safe mode and turn off any add-ins you don’t need.

  1. Start Outlook in safe mode and turn off any add-ins you don’t want to use.

Which of the command is used to come out of Safemode in Hadoop?

As the name implies, a Safemode for Namenode is basically a read-only mode for the HDFS cluster, in which no changes may be made to the file system or to individual blocks. Normally, Namenode automatically disables safe mode at the start of the session. It is possible to force HDFS into safe mode explicitly using the bin/hadoop dfsadmin -safemode command if this is necessary.

How do I log into Windows 10 without a password?

To begin, log into your Windows 10 user account as you would usually do by entering your password at the login page (see below for instructions).

After that, click Start (or press the Windows Key on your computer) and type netplwiz into the search box. The “netplwiz” command will display as a search result in the Start Menu search when you type it into the search box.

How do I bypass a password on Windows 10 when its locked?

Enter the command “netplwiz” in the Run box and click Enter.

  • Select a user account in the User Accounts dialog box, under the Users tab, that will be used to automatically log into Windows 10 from that point forward. Select “Users must provide a user name and password in order to access this computer” and click “Uncheck”. In the pop-up dialog box, type in the user password you want to use and click OK

How do I bypass Windows login screen?

First, enable automatic logon – this will allow you to bypass the Windows 10/8/7 login screen.

  1. To bring up the Run box, press the Windows key + R together. Select the account you want to use to log in automatically from the User Accounts dialog box that opens, and then uncheck the option that says Users must provide a user name and password to use this computer.

How do I exit Safe Mode from command prompt?

If you are in Safe Mode, press the Win+R keys together to bring up the Run box. Type cmd and – after a brief pause – press Ctrl+Shift before pressing Enter. This will launch a Command Prompt with elevated privileges.

Why is my safe mode not turning off?

After the phone has been turned off, press and hold the “Power” key to restart it. The phone should be out of “Safe Mode” at this point. Whether the “Safe Mode” is still active after restarting your phone, I would first check to see if the “Volume Down” button is not stuck in the down position.

How do I get rid of Safe Mode?

Disabling Safe Mode is a simple process.

  • While the gadget is still operational, remove the battery. Remove the battery from the device for 1-2 minutes. (I normally give myself 2 minutes just to be sure.) Replacing the battery in the S II is simple. To turn on the phone, press and hold the Power button. Continue to let the gadget turn on as usual, without pressing any buttons

How do I turn off ultra fast boot?

Hold down the F2 key until the power is turned on. By doing so, you will be sent to the BIOS configuration utility. You may turn off the Fast Boot Option from this menu. When using the F12 / Boot menu, you will need to make sure that Fast Boot is not turned on.

Should I disable fast boot?

In the Power Options box, select “Choose what the power buttons do” from the drop-down menu. Scroll to the bottom of the window, where you should find the option to “Turn on rapid startup (recommended),” as well as additional shutdown configurations. To activate or disable Fast Startup, simply choose the appropriate check box.

What should I disable in Windows 10?

Unnecessary features in Windows 10 can be turned off by the user. To turn off Windows 10 features, go to the Control Panel, choose Programs and Features, and then click Turn off Windows 10 Features. You may also go to “Programs and Features” by right-clicking on the Windows logo and selecting it from the drop-down menu. “Flickr” provided the image used in the article.

Leave a Comment

Your email address will not be published. Required fields are marked *