How To Find Specs On Windows 10

Contents

How to find your computer’s specs on Windows 10, for information on its processor, video card, memory, and more

  • You can obtain extensive specifications about your machine in Windows 10, but the information is distributed around the operating system in different locations. By hitting the Windows key plus the Pause Break key, you may get some basic information about your machine. SystemInformation and DxDiag provide more in-depth information
  • However, they are not required. More articles may be found on the Business Insider homepage.

Whether you’ve constructed a bespoke Windowscomputer, carefully selecting every component to ensure optimal performance, or you’ve just purchased an off-the-shelf laptop, you may occasionally want particular information about what’s going on inside. Windows provides you with the tools you need to learn about your computer’s specifications, including information on its CPU, video card, RAM, and other components. That information, unfortunately, is dispersed across Windows in a variety of seemingly random locations.

Check out the products mentioned in thisarticle:

With a couple of clicks, you can get detailed information about your CPU, how much RAM is installed, and the version of Windows you are running on your computer. 1.Click the Start button and type “Control” into the search box. Photo: The Control Panel may be accessed by entering “control” into the Start menu. source Dave Johnson of Business Insider has contributed to this article. Choosing ControlPanel from the search results is step two. 3.Click”System.” In the System section, you will get an overview of the specifications of your computer.

To open this ControlPanel page more quickly, hold down the Windows key and the Pause Break key at the same time.

Find basic system information in Settings

With a handful of clicks, you can get detailed information on your CPU, how much RAM is installed, and which version of Windows you are running. Click the Start button and put “Control” into the search box. 2. In the Start menu, search for “control” to bring up the Control Panel. source Business Insider photographer Dave Johnson Choosing ControlPanel from the search results is step number two. 3.Click”System.” The System section contains an overview of the specifications of your computer. business insider/Dave Johnson as a source The Windows key + the Pause Break key together will launch this ControlPanel page more quickly.

Find detailed specs in System Information

Windows’ SystemInformation contains far more thorough information about your machine than the information found in the Windows’ SystemInformation. 1.Click Start and put “system information” into the search box. 2.Go to the search results and look for “SystemInformation.” 3.The most of the information you want may be found on the first page, in the SystemSummary node. You may also click on any node in the left pane to see more details about that node. Photo: The System Information application serves as a portal to extensive information about your computer’s hardware and software.

In order to obtain detailed information on your video card, go to “Components” and then “Display.”

Find details about video and sound in DirectX DiagnosticTool

When you click on System Information in Windows, you’ll get a lot more information about your machine. Click Start, then type “system information” into the search box. 2.In the search results, select “SystemInformation.” 3.The SystemSummary node on the first page contains the majority of the information you want. Additional information may be accessed by expanding each node in the left pane.

A photograph of the System Information software, which serves as a portal to extensive information about your computer system. source Business Insider photographer Dave Johnson When you want to see more information about your video card, first select “Components,” and then select “Display.”

Related coverage fromHow To DoEverything: Tech:

Because there are hundreds of different firms that build Windows PCs, it can be difficult to determine what type of processor you have, how much RAM you have, and other specifications. In addition, understanding how to verify your computer specs makes it easier to update your hardware and determine the system requirements for an application you wish to install. Here’s how to check your computer’s specifications and the health of its hardware on Windows 10.

How to Check Computer Specs

Because there are hundreds of different firms who produce Windows PCs, it might be difficult to figure out what kind of CPU you have, how much RAM you have, and other specifications of your computer. In addition, knowing how to verify your computer specs makes it simpler to update your hardware and determine the system requirements for an application you wish to install. Find out how to check your PC’s specifications and the health of its hardware on a Windows 10 computer in this tutorial.

  1. To begin, press the Windows Start button. It’s the Windows logo button in the bottom-left corner of your screen
  2. Then select Settings from the menu that appears. This is the gear-shaped symbol that appears right above the power button on your device. After that, choose System. Scroll down to the bottom of the page and selectAbout from the left sidebar. You may discover information on your CPU, RAM, and other components in this section.

How to Find Out How Much RAM You Have

The quickest and most straightforward way to see how much RAM you have is to type RAM into the Windows search box. The View RAM Infooption should appear in the search results box if the search term is entered correctly. To access the System Configuration window, click on here. Check the field forInstalled RAM in theDevice Specificationssection of the device’s documentation.

  1. Choose RAM by typing it into the Windows search bar by clicking on the magnifying glass icon in the bottom-left corner of your screen
  2. To view RAM information, press Enter or choose View RAM Information from the search results. Check the information under the Installed RAM section. Your RAM installation and usage will be displayed by Windows, as well as your total RAM usage and installation. This information may be found in theDevice Specificationssection.

Choose RAM by typing it into the Windows search bar by clicking on the magnifying glass icon in the lower-left corner of your screen; Press Enter or choose View RAM Info from the search results to see the RAM information. In Installed RAM, look for the information that was previously mentioned. Your RAM installation and usage will be displayed by Windows, as well as your remaining RAM capacity. In theDevice Specificationssection, you will find these information;

How to Find Out What GPU You Have

Use the Windows search bar to find out what graphics processing unit (GPU) you have by typing Device Manager in the search box and pressing enter. Then choose Display adaptors from the drop-down menu by clicking on the arrow next to it.

  1. In the Windows search box, type inDevice Manager to find it. Windows will begin to load search results even before you have finished typing the search word
  2. Press Enter or click on theDevice Managerapp icon that appears to continue the search process. The icon for theDevice Managerapp should be a camera next to a printer, as seen below. The Device Managerwindow will be opened by pressing the Enter key or clicking on the icon. Finally, click on the arrow next to Display adapters to check which GPU you have installed on your computer. The entry below, Display adaptors, indicates the GPU you are using.

Note:If the manufacturer’s name does not appear in the record, perform the following steps:

  1. Choose the name of the GPU. This will cause it to be highlighted in blue
  2. Right-click on the graphics processing unit (GPU)
  3. On the pop-up menu that opens, selectProperties. By default, the Properties window will open to the General tab
  4. However, you may change this. Look for a field labeledManufacturer on the General tab of the window.

How to Find Out What Motherboard You Have

If you want to find out what sort of motherboard you have, put system information in the Windows search box and press enter. Afterwards, check for a field with the labels System Manufacturer and System Model. This will provide you with information on the manufacturer and model of your motherboard.

  1. Information about the typesystem is displayed in the Windows search bar. Even before you have finished typing the search query, Windows will begin to load search results. Press Enter or select the System Informationapp icon from the menu bar. The System Informationapp icon resembles a computer with a blue screen in the centre and the letter I in the middle of that screen. By default, pressing Enter or clicking the program icon will open theSystem Summarysection
  2. However, you may change this by selecting another option. Check check the fields for the BaseBoard Manufacturer, Product, and Version
  3. These are all important.

Consider reading our post on how to pick the best motherboard if you’re thinking about upgrading your system’s mother board.

How to Find Out What CPU You Have

In order to determine what CPU you have, use the keys Ctrl + Alt + Delete on your keyboard. To access the Task Manager, select the Performance tab from the drop-down menu. Located in the top right-hand corner of the window, and above the CPU use charts, you will see your CPU information.

  1. In order to determine what CPU you have, hit the keys Ctrl + Alt + Deleteon your keyboard. To access the Task Manager, select the Performance tab from the drop-down list. Located in the top right-hand corner of the window, directly above the CPU use charts, you will see your CPU data.

Are you interested in learning more about CPUs and what they do? Check out our page on what a central processing unit (CPU) is.

How to Check Windows 10 Computer System Specs & Requirements – Microsoft

For the most part, these are the requirements for installing Windows 10 on a computer.

If your device does not satisfy these requirements, you may not be able to enjoy the full Windows 10 experience, and you may want to consider getting a new computer.

Processor: 1 gigahertz (GHz)or fastercompatible processoror System on a Chip(SoC)
RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit
Hard drive size: 32GB or larger hard diskNote: See below under “More information on hard drive space to install or update Windows 10” for more details.
Graphics card: Compatible with DirectX 9 or later with WDDM 1.0 driver
Display: 800×600
Internet Connection: Internet connectivity is necessary to perform updates and to download and take advantage of some features. Windows 10 Pro in S mode, Windows 10 Pro Education in S mode, Windows 10 Education in S mode, and Windows 10 Enterprise in S mode require an internet connection during the initial device setup (Out of Box Experience or OOBE), as well as either a Microsoft account (MSA) or Azure Activity Directory (AAD) account. Switching a device out of Windows 10 in S mode also requires internet connectivity.Learn more about S mode here.

Additionally, there may be additional needs for upgrades throughout time, as well as requirements to switch on certain capabilities inside the operating system. Windows 10 is designed to give updates over the duration of the device’s supported life cycle. Quality updates and feature updates are the two sorts of updates that may be delivered. Quality updates, which comprise both security and non-security updates, are normally provided once a month and are intended to be installed before the end of the month.

You might be interested:  How To Remove Microsoft Edge From Windows 10

It is critical for the security of your device that these updates are received and that your device be maintained up to date at all times.

Whenever an update becomes available, and provided that there is adequate free storage space on your device, it will be deployed automatically.

See the following notes for any extra information that may be relevant.

  • If the device hardware is incompatible with the operating system, if it lacks current drivers or adequate accessible hard drive space, or if it is otherwise outside of the Original Equipment Manufacturer’s (“OEM”) support period, the device may be unable to receive updates. You can learn more about the servicing timelines for each feature update by visiting theWindows Lifecycle Fact Sheet or theWindows Lifecycle FAQ for Windows products.
  • Some of the disk space necessary for installing updates is only required for a short period of time. It is typical that ten days after installing an update, a disk cleanup will be carried out automatically in order to destroy copies of the older, unnecessary Windows files and free up space on the computer’s hard drive.
  • Not all of the features included in an update will be available on all devices. It is necessary to have an internet connection in order to execute updates, and Internet service provider (ISP) costs may apply. If you want assistance with the installation of an update, the Windows 10 Update Assistant may be able to assist you

A feature may not operate on all devices if it is included in an update. For updates to be completed, an internet connection is necessary, and Internet service provider (ISP) costs may be incurred. It is possible that the Windows 10 Update Assistant will be able to assist you with the installation of a particular update;

  • Not all of the features in an update will be available on all devices. It is necessary to have an internet connection in order to execute updates, and Internet service provider (ISP) costs may be charged. If you require assistance with the installation of an update, the Windows 10 Update Assistant may be able to assist you.
  • A high-fidelity microphone array
  • A hardware driver that makes the geometry of the microphone array visible
  • Tablet mode is accessible on tablets and 2-in-1s that have GPIO indications, as well as those that have a laptop and slate indicator, and may be programmed to automatically enter “tablet mode.” A tablet or a monitor that supports multi-touch is required in order to make advantage of touch. When using two-factor authentication, you must have a PIN, a biometric (fingerprint reader or lighted infrared camera), or a phone with Wi-Fi or Bluetooth capabilities to complete the transaction. Microsoft Windows Hellorequires either an infrared (IR) camera or a fingerprint reader for biometric authentication in order to function properly. Windows Hello may be used on devices without biometric sensors by entering a PIN or using a portable Microsoft compatible security key. An Xbox Live account is required for use of the Xbox application, which is not accessible in all territories. If you’re looking for the most up-to-date list of regions, visit the Xbox Live Countries and Regions website. Wi-Fi Direct Printing necessitates the use of a Wi-Fi adapter that is compatible with Wi-Fi Direct as well as a device that is compatible with Wi-Fi Direct printing.

It is possible to configure tablet mode on tablets and 2-in-1s that have GPIO indicators, or on those that have a laptop and slate indication, so that they enter “tablet mode” automatically. A tablet or a monitor that supports multi-touch is required in order to use touch. When using two-factor authentication, you must have a PIN, a biometric (fingerprint reader or lighted infrared camera), or a phone with Wi-Fi or Bluetooth capabilities to complete your transaction. Microsoft Windows Hellorequires either an infrared (IR) camera or a fingerprint reader for biometric authentication in order to work properly.

Please visit the Xbox Live Countries and Regions page for the most up-to-date list of regions.

  • A sync option is available in the messaging program on the desktop, which can be used to sync SMS text messages received from Windows Mobile and save a duplicate of them on the desktop. With the release of the May 2019 Update (Windows 10, version 1903), the sync capability was disabled from all devices. Messages will only be accessible from the device that received the message, as a result of this modification. Wireless WEP and TKIP: Starting with the May 2019 Update (Windows 10, version 1903), when connecting to Wi-Fi networks protected with WEP or TKIP, a warning notice will show, indicating that the network is not as secure as Wi-Fi networks secured with WPA2 or WPA3. Any connection to a Wi-Fi network made using these obsolete ciphers will be prohibited in a future version of the software. Wireless routers should be updated to support AES ciphers, which are accessible with WPA2 or WPA3 security protocols. In the Windows 10 May 2020 Update, the Cortana virtual assistant has been upgraded and expanded (Windows 10, version 2004). Affected by these changes will be the discontinuation of various previously accessible consumer talents, including music, linked home capabilities, and third-party capabilities. More information may be found here. As of the October 2018 Update (Windows 10, version 1809), the Phone Companion application has been deleted from your computer. To sync your mobile phone with your PC, go to the Phone page in the Settings app and select Phone. Every functionality of Phone Companion is included in this package. HomeGroup: HomeGroup has been deprecated since the April 2018 Update (Windows 10, version 1803), however you may still share printers, files, and folders with other users. It is not possible to see HomeGroup in File Explorer, the Control Panel, or Troubleshoot (SettingsUpdateSecurityTroubleshoot) if you are upgrading from an earlier version of Windows 10. Printers, files, and folders that you shared via HomeGroup will continue to be shared in the future as well. As an alternative to utilizing HomeGroup, the following functionalities are integrated into Windows 10:
  • Share printers, files, and folders
  • And share documents.
  • Distribute the use of your network printers. File Explorer allows you to share files with others. Please visit the following link for additional information on streaming media for Xbox 360 and HomeGroup customers.
  • Using the People app in Windows 10, you can see mail from Microsoft 365 contacts, contacts from your school or work organization, and contacts from your contacts list underConversations. For new mail from these specific contacts to appear in the People app after installing the April 2018 Update (Windows 10, version 1803), you must be connected to the internet and have signed into your account, which can be a Microsoft 365 account or a work or school organization account through theMail,People, orCalendarapps. Please keep in mind that you will only get mail for work and school organization accounts, as well as select Microsoft 365 accounts
  • And App for readers: With the release of the Fall Creators Update, the Reader application was no longer available in Windows 10. (Windows 10, version 1709). In order to read PDF files, Microsoft Edge is the suggested alternative program. It provides comparable functionality to Adobe Reader while also providing extra capabilities such as greater accessibility support, improved Inking, and support for Cortana voice commands. Similarly, when reading XPS files, the Windows XPS Viewer is advised, and while viewing TIFF images, the Windows Photos program is recommended. It should be noted that users of previous versions of Windows 10 can continue to use the Reader application
  • Windows Journal:Windows Journal was deleted with the release of the Windows 10 Anniversary Update (Windows 10, version 1607). The removal of Windows Journal will prevent you from being able to open or edit Journal files in the future (with.JNT or.JTP extensions). We recommend you to use OneNote instead of Windows Journal as your primary productivity tool. If you need help opening or editing your journal files, you can find further information here. Windows Media Digital Rights Management (WMDRM): Starting with the Windows 10 Anniversary Update, WMDRM will no longer be supported by Microsoft (Windows 10, version 1607). The ability to play music or video files that were previously protected by this rights management system has been removed. More information may be found by clicking here.

Devices that are upgrading from Windows 7, Windows 8, or Windows 8.1 to Windows 10 will be affected by the following modifications:

  • Installing Windows 10 will delete Windows Media Center if you have a previous version of Windows 7 (Home Premium, Professional, Ultimate), a previous version of Windows 8 (Pro with Media Center), or a previous version of Windows 8.1 Pro with Media Center. Mobile Device Management (MDM) is a term that refers to the management of mobile devices. When using the Windows 10 Home edition, you will be unable to use MDM capabilities. Gadgets on the Windows 7 desktop include: These will be uninstalled as part of the Windows 10 installation process. Solitaire, Minesweeper, and Hearts Games: These games, which come pre-installed on Windows 7, will be deleted as part of the Windows 10 upgrading process, which will take around 30 minutes. Microsoft has made available our versions of Solitaire and Minesweeper, which are referred to as the “Microsoft Solitaire Collection” and “Microsoft Minesweeper,” respectively. Drives that are compatible with floppy disks: If you have a floppy drive, you must obtain the most recent driver from Windows Update or from the manufacturer’s website. Because OneDrive is no longer supported if you have Windows Live Essentials installed on your PC, the OneDrive program is deleted and replaced with the inbox version of OneDrive. OneDrive placeholder files: OneDrive placeholder files are not supported in Windows 10. OneDrive placeholder files are not supported in Windows 10. In Windows 8.1, placeholders were presented for files that were available in OneDrive but not locally on the device. When using OneDrive settings in Windows 10, users may select which folders they want to sync with their computer. Snap:Snap is only capable of running two programs at a time in Tablet mode.

How to check your PC specs in Windows 10

Installing Windows 10 will delete Windows Media Center if you have a previous version of Windows 7 (Home Premium, Professional, Ultimate), a previous version of Windows 8 Pro with Media Center, or a previous version of Windows 8.1 Pro with Media Center. Mobil Device Management, often known as MDM, is a technology that allows you to manage your mobile devices. In the Windows 10 Home edition, there will be no MDM capability accessible. Desktop gadgets for Windows 7 include: During the installation of Windows 10, they will be uninstalled.

  • The “Microsoft Solitaire Collection” and the “Microsoft Minesweeper” are our versions of the classic games Solitaire and Minesweeper, respectively.
  • It is possible that if you have Windows Live Essentials installed on your PC, the OneDrive program will be deleted and replaced with the inbox version of OneDrive.
  • In Windows 7, OneDrive placeholder files are supported.
  • When using OneDrive settings in Windows 10, users may select which folders they want to sync.

Finding the basic specs in Windows 10

Installing Windows 10 will delete Windows Media Center if you have a previous version of Windows 7 (Home Premium, Professional, Ultimate), a previous version of Windows 8 (Pro with Media Center), or a previous version of Windows 8.1 Pro with Media Center; Mobile Device Management (MDM) is a term that refers to the administration of mobile devices. The MDM feature will not be accessible in the Windows 10 Home edition. Desktop gadgets for Windows 7: These will be uninstalled as part of the Windows 10 installation process; Several games, including Solitaire, Minesweeper, and Hearts, that came pre-installed on Windows 7 will be uninstalled as part of the Windows 10 upgrading process.

Drives that are compatible with floppy disks: If your computer has a floppy drive, you must obtain the most recent driver from Windows Update or from the manufacturer’s website.

OneDrive placeholder files are not supported on Windows 10.

Users may pick which folders to sync from the OneDrive settings in Windows 10.

  • Start by selecting Start from the Start Menu. “Control Panel” may be found by typing or searching for it. Then locate and choose “System and Security” from within the Control Panel window. In the new view, locate and choose “System” or “View amount of RAM and CPU speed” from the drop-down menu

Using the Task Manager’s Performance tab

Kevin Casper/International Development Group Windows 10 has a Performance area in the ever-popular Task Manager, which many users use to force an application to quit when it becomes stuck. This part lets you to get a fast peek at your active hardware specifications, as well as charts and statistics on how active they are. There are two keyboard shortcuts that may be used to bring up the Task Manager:

  • IDG courtesy of Kevin Casper Windows 10 has a Performance area in the ever-popular Task Manager, which many users use to force an application to quit when it becomes stuck. This part lets you to get a fast peek of your active hardware specs, as well as charts and statistics on how active they are. Two keyboard shortcuts may be used to launch the Task Manager: ESC and F5.

Kevin Casper / International Development Group Windows 10 has a Performance area in the ever-popular Task Manager, which many users use to force an application to quit when it becomes stuck. This part allows you to get a fast view at your active hardware specs, along with charts and information on how active they are. There are two keyboard shortcuts that may be used to access the Task Manager:

  • Start by selecting Start from the Start Menu. “Task Manager” may be found by typing or searching for it. To open the “Task Manager” app, choose it from the search results and click on it.
You might be interested:  How To Do A System Restore On Windows 10

The Performance tab should be visible once the Task Manager has been opened, and you should be able to choose it by clicking on it. The CPU, memory (also known as RAM), disk drives, network connection(s), and graphics devices should all be listed on the left side of the Performance tab, if they are relevant to your situation. Any device selected will display more hardware information, as well as information on current activities on your computer, such as how much CPU power or RAM your computer is using.

Kevin Casper/International Development Group Windows 10 offers a more sophisticated tool known as System Information, which may provide you with more extensive specification information on your computer’s hardware. To access the System Information tool, follow these steps:

  • Start by selecting Start from the Start Menu. “System Information” should be typed in or searched for. To access the “System Information” app, choose it from the search results and click on it.

The System Information tool’s first page provides a comprehensive overview of your computer’s characteristics, including in-depth information on your operating system, CPU, BIOS, motherboard, RAM, and other important components. Detailed information may be found by browsing the category tree in the left-hand pane of the window, notably under the heading “Components.” The following definitions will assist you in understanding some of the terms used in this tool:

  • Processor is the same as CPU, while BaseBoard is the same as Motherboard. Physical Memory is equal to random access memory (RAM) (In Category tree) Display is an abbreviation for graphic device (In the ComponentsDisplay category) Graphics Card is referred to as by its name. It is located under Storage in the Category Tree. Drives = the partitions of disk space that have been formatted and where you put your files, such as C: and D:
  • (In Category tree, under Storage) disks = the actual storage hardware in your computer that contains the formatted drives
  • Disks = the physical storage hardware in your computer

There are a multitude of PC spec and performance monitoring tools available, but two standouts that can offer a comprehensive picture of your PC’s hardware and specification information are HWiNFO and Speccy, both of which are free to download. Information courtesy of Kevin Casper/IDGHWInfo HWiNFO delivers information that is comparable to that provided by both the Windows 10 Task Manager Performance tab and the System Information tool, but with more specificity and depth. HWiNFO may connect to the different sensors in your computer to provide a detailed view of various hardware characteristics, such as CPU speeds and voltage settings.

Clickable links to various component sections provide additional thorough information, if necessary, on the individual components.

How to check your PC specs in Windows 10

(Photo courtesy of Wachiwit/Shutterstock.com) It’s critical to understand how to check your computer’s specifications in Windows 10 so that you can view essential information about the internal workings of your machine. Some questions may arise, such as whether you’re running the latest version of Windows, what CPU is powering your computer, or how much RAM you have available. Alternatively, you may like to upgrade your graphics card but are unsure of the model you presently have installed.

  • Identifying and obtaining your Windows product key
  • What you need to know about using Windows 10 like a pro: important tips and techniques
  • What is the best way to uninstall Cortana on Windows 10? Learn how to switch off Windows Defender in this tutorial. How to check the health of your laptop battery in Windows 10
  • The greatest Windows laptops that are currently available on the market

Windows 10 gives detailed information on all of the specs you want, but it does not make it easy to locate this information. Checking your PC specs might also be difficult if you are looking for simply the most basic information and not a lot of technical information. Rather of purchasing and installing a third-party tool to obtain a summary of your system characteristics, you may obtain the information yourself if you know where to search. In this section, we’ll go over three methods for checking your PC’s specifications in Windows 10.

How to check your PC specs in Windows 10: Use the Settings app

The Windows Settings program is the quickest and most convenient way to receive a quick overview of your computer’s characteristics, however it contains fewer information than alternative approaches. Here’s how to verify your system specifications using the Settings menu. 1. To launch the Settings app, start by clicking the Windows 10 Start button and then selecting the gear icon, which is situated above the Power option. (Photo courtesy of Microsoft) 2.When the Settings box appears, select System from the drop-down menu in the top-left corner.

You may find essential information about your CPU, installed RAM, and system type (64-bit or 32-bit) under the “Device specs” section, which also contains your Windows product key.

To copy the PC specifications to your clipboard, click the Copy button to the right of any section. You can then paste them into a document or email. (Photo courtesy of Microsoft)

How to check your PC specs in Windows 10: View System Information

If you want to know more about the technical specifications of your computer’s components, you may access the System Information panel in Windows 10 and look up the specifications of your machine. Listed below is the procedure for gaining access to this useful yet hidden away function. 1. Type “system information” into the Windows search box and then select System Information from the list of results that appears. Alternatively, hold down the Windows key and R to bring up the Run box, where you may type “msinfo32” and hit Enter.

This gives a wealth of essential information about your computer’s specifications, including the CPU, motherboard, and amount of real and virtual memory accessible.

For example, go to Components, then Network, then Adapter to find out more about your internet connection, including the sort of adapter you’re using, your IP address, device drivers, and other information about it.

Every driver is listed here, along with information about its location, what it does, and whether or not it is currently operating, among other things.

How to check your PC specs in Windows 10: Use the command prompt

It is possible to receive a more digestible overview of your computer characteristics using the Windows command prompt if System Information provides you with too much information. Please see below for the command to be entered. 1. Press the Windows key and R to bring up the Run box, then type cmd and either click OK or press Enter to finish. 2. (Photo courtesy of Microsoft) 2.Type sysinfo into the command prompt window that appears, and then press Enter to see a list of your computer’s specifications.

(Photo courtesy of Microsoft) 3.In order to copy the list of specifications into a document or email, hold down the Ctrl and A keys on your computer to select everything in the command prompt window, then hold down the Ctrl and C keys.

(Photo courtesy of Microsoft)

More Windows tips

That’s all there is to it. Why not have a look at our other excellent Windows 10 tutorials for additional information? Getting your Windows 10 product key|How to encrypt files on Windows 10|How to install Windows 10|How to turn on Bluetooth for Windows 10|How to screenshot on Windows 10|How to boot into Windows 10 safe mode|How to record a screen on Windows 10|How to update drivers on Windows 10|How to factory reset on Windows 10|How to speed up Windows 10|How to reinstall Windows 10 Tom’s Guide’s How-To Editor is Robert Irvine.

He lives in New York City.

Robert adores cooking and can whip up a good sausage casserole, but he is in no way comparable to the celebrity chef of the same name who has become a household name.

How to Check PC Full Specs Windows 10 in 5 Ways

No matter when you want to check the complete characteristics of your Windows 10 PC, laptop, or tablet, you may do so using the five methods detailed in this post by MiniTool Software. A step-by-step explanation on how to check PC specifications in Windows 10 is provided. Consider checking the entire specifications of any new Windows 10 machine you want to purchase before making your final decision. Still, if your Windows 10 PC is experiencing issues, you should review the precise computer specifications for Windows 10 to assist you in troubleshooting the issue.

So, let’s get right to the point: how can you check your PC’s specifications in Windows 10?

These five methods make it simple to determine the operating system version, model number, CPU, RAM, hard drive, graphics card, BIOS (Basic Input/Output System), UEFI (Unified Extensible Firmware Interface) firmware, and other details about your Windows 10 machine.

Quick Video Guide: Free Download Quick Video Guide:

How to Check PC Specs Windows 10 through System Properties

The System Properties window is one of the most commonly used tools for determining the specs of a Windows 10 computer. You may view the fundamental computer specifications of your Windows 10 machine, such as the Windows 10 edition and the system details.

Step 1. Open Windows System Window

Normally, there are two options for opening the Windows 10 System window.

  • You may access the computer system window by selectingProperties from the menu bar when you right-click This PC on the computer screen. By hitting the shortcut key, you may access the Windows Systemwindow in a flash. For example, press Windows and the Pause/Breakkey on the keyboard simultaneously.

Step 2. Check Computer Specs Windows 10

Here, in theSystemWindow, you can check basic information about your Windows 10 machine, such as the operating system’s edition and CPU and RAM capacity. You can also view the system type, computer name and domain, product ID, and Windows activation status. Check out the Windows 11 pricing and learn how to obtain a Windows 11 license/product key in three different methods. Activate your Windows 11 computer or laptop in seconds.

How to Find Computer Specs Windows 10 from Settings

SystemWindow allows you to examine basic information about your Windows 10 machine, including the operating system, CPU and RAM installed on the computer; the system type; the computer name; the domain; the product ID; the status of Windows activation; and other relevant information. You can find out how much Windows 11 costs and how to obtain a Windows 11 license/product key in three different methods by visiting this page. Your Windows 11 computer or laptop may be activated quickly and easily.

How to Check PC Specs Windows 10 Using System Information

System Information allows you to view the whole set of computer specifications for your Windows 10 computer. Take a look at the guide below.

Step 1 – Open System Information Window

In addition, there are two ways to access the Windows System Information Window.

  • Alternatively, you may hit the Windows+Rkey combination on the keyboard to open the WindowsRUNwindow first. Then type msinfo32 and press the Enter key
  • Alternatively, you may click Start and type System Information. And then pick the most appropriate match result. Information about the system

Step 2 – Find Full Computer Specs Windows 10

Prior to doing so, you can hit the Windows+Rkey combination on your keyboard to open the WindowsRUNwindow first and then proceed. Type msinfo32 into the search box and press the Enter button; alternatively, you may click Start and type System Information. Afterwards, select the most appropriate match result. Informatics of the system.

How to Check PC Specs Windows 10 with Command Prompt

Another option for obtaining computer specifications in Windows 10 is to utilize the Command Prompt.

Step 1. Open Command Prompt Tool

To begin, you must launch the Command Prompt, which is a program that checks your computer’s specifications. There are two ways to get into it.

  • To launch the Command Prompt window, just press the Windows+R keys together and type cmdin theRUNwindow. Alternatively, you may click Start and type Command Prompt. Then right-click the Command Prompt result and select theRun as administrator option from the context menu that appears.

The two most effective methods of booting into the Command Prompt on Windows 10. Learn how to launch the Command Prompt at startup time in Windows 10 and how to repair Windows 10 using the Command Prompt in this article.

Step 2. Check Windows 10 Computer Specs

After that, you may type systeminfo and press Enter. Your Windows 10 computer specs will be presented in the following window, including the operating system and system information, CPU, RAM, BIOS and Windows 10 update information, as well as network information. Will Windows 11 continue to support 32-bit applications? This page contains information about Windows 11 32 bit and, if it is supported, provides links to Windows 11 32 bit download sites if necessary.

How to Check Laptop Specs Windows 10 through PowerShell

The last and most practical method of obtaining Windows 10 machine specifications is through the use of Windows PowerShell.

Step 1 – Open Windows PowerShell

If you want to launch PowerShell as an administrator, you may right-click Start and select Windows PowerShell (Admin).

Step 2 – Get Windows 10 Computer Specs Information

Afterwards, you may run the following command line: Get-ComputerInfo. HitEnter. After that, you may use Windows 10 to see the whole set of specifications for your machine. You may quickly and simply verify the entire specifications and system details of your Windows 10 PC by using one of the five methods listed above. For a better gaming experience, learn how to download and install DirectX 12 (Ultimate) on your Windows 10 or Windows 11 computer. In this tutorial, you will also discover what DirectX 12 (Ultimate) is.

Best PC Benchmark Software to Test PC Hard Drive Speed

When it comes to PC performance testing, the finest PC benchmark software – MiniTool Partition Wizard – makes it simple to assess hard disk speed in Windows 10 with the click of a button. MiniTool Partition Wizard is a free hard drive partition manager that is compatible with Windows 10/8/7. It is completely clean and safe to install. On your Windows 10 PC, you may simply use it to test the hard drive/performance, SSD’s create, resize, extend, merge, divide, remove, format, copy, wipe partitions, copy/convert disks, migrate OS, recover data (recover my files), and perform a wide range of other operations.

You might be interested:  Where Is The Start Menu In Windows 10

Download it for free.

Step 2.In the Disk Benchmark window, you may specify the PC disk or partition to be benchmarked, as well as the Transfer Size, Total Length, Queue Number, Thread Number, Cool Down Time, and Test Mode parameters (Sequential, Random, and SequentialRandom).

Step 3.Click the Startbutton to begin measuring the read and write speeds of your PC’s hard disk.

PC Drive Is Full? Use Space Analyzer to Release Free Space

When it comes to PC performance testing, the finest PC benchmark program – MiniTool Partition Wizard – makes it simple to assess hard disk speed in Windows 10. Windows 10/8/7 are both compatible with MiniTool Partition Wizard, which is a completely free and clean hard disk partition organizer. On your Windows 10 PC, you may simply use it to test the hard drive/performance, SSD’s create, resize, extend, merge, divide, remove, format, copy, wipe partitions, copy/convert disks, migrate OS, recover data (recover my files), and perform a wide range of other tasks.

It is possible to get it for free.

Step 2.In the Disk Benchmark box, you may specify the PC disk or partition to be benchmarked, as well as the Transfer Size, Total Length, Queue Number, Thread Number, Cool Down Time, and Test Mode to use (Sequential, Random, and SequentialRandom).

PC Specs Test – Check If Your PC Can Run a Game

After using the methods outlined above to determine your computer’s complete set of specifications in Windows 10, you now know your computer’s processor, CPU, GPU, RAM, and other components. The system requirements for the game to operate on your PC may be found by searching for “game system requirements” on the game’s official website. In most cases, the system requirements for operating this game may be found on the game’s website or on a website where it is being sold; for example, the information can be found on each game’s page on the Steam shop.

There are various discrepancies between the criteria for the minimum and those for the recommended.

However, if you want to have a better gaming experience, it is advised that you fulfill the minimum system requirements as well.

Verdict

In terms of how to verify PC specifications, This page offers you with 5 different methods, each with full step-by-step instructions. If necessary, you may also use MiniTool Partition Wizard to simply run a PC benchmark, monitor PC space use, and manage PC hard drive/partition using the software. When will Windows 11 be made available to the public? On June 24, 2021, Microsoft announced the availability of the first Insider Preview of Windows 11. The official release date may be October 2021, according to certain sources.

How to Find and Check Your Computer Specs in Windows 10, 8, and 7

There is a wealth of information available on what is included within your computer, but in the majority of cases, you will be interested in one of the important specifications listed below.

If you already know the specification you’re interested in and want to learn how to rapidly examine its details, scroll down to the section below.

CPU

Even if there is a wealth of information available on what’s inside your computer, you are most likely interested in one of the essential specifications listed below. In case you already know the standard you’re interested in and want to learn how to rapidly examine its contents, please continue reading this article.

GPU

It is the graphics processing unit (or GPU) that is in charge of everything you see on your screen. Knowing your GPU specifications is very crucial while gaming or performing other graphics-intensive jobs such as video editing on a computer. Your GPU, like your CPU, can overheat if you ask it to perform tasks that it is not capable of performing.

RAM

RAM (random access memory) is used by your computer to manage all of the processes that are currently running on it. The more random access memory (RAM) you have, the more work your computer can manage – and the more jobs it can complete — at the same time.

Motherboard

You can speak with one another thanks to the motherboard, which connects your CPU, graphics card, and RAM all in one place. The motherboard has specific physical limitations due to the fact that it is a piece of hardware — for example, if your motherboard only has two RAM slots, you will not be able to insert more than two RAM modules if you are upgrading your RAM.

Hard drive space

It is the motherboard that connects your CPU, GPU, and RAM together, allowing them to interact with one other. The motherboard has specific physical limitations due to the fact that it is a piece of hardware — for example, if your motherboard has just two RAM slots, you will not be able to insert more than two RAM modules if you are upgrading your RAM.

Why should I check my PC specs?

It is the motherboard that connects your CPU, GPU, and RAM together, allowing them to interact with one another. Because it is a piece of hardware, the motherboard has specific physical limitations — for example, if your motherboard only has two RAM slots, you will not be able to insert more than two RAM modules if you are upgrading your RAM.

  • When you’re selling your computer: When you’re selling your computer, make a list of all of its specifications. This will provide prospective purchasers with the information they require in order to make an informed selection, and it will also assist you in determining how much you should charge
  • When you want to get a new computer, consider the following: Examining your present computer specifications might assist you in determining what you require in a new computer. Learn about the areas where your existing computer falls short so that you can evaluate how powerful your new computer should be. It is possible to compare CPU specifications and look at different GPU benchmarks to determine what you want when designing your own computer. When you want assistance: Do you have a problem with your hardware or another performance issue? When you call tech support, be prepared to provide them with the specifics of your problem. They’ll need to know what you’re dealing with in order to provide you with the finest advise. When you’re upgrading your drivers, keep these things in mind: When you update your graphics drivers or audio drivers, you’ll need to know the precise model number of your graphics or sound card in order to do so successfully. That is, of course, unless you’re using a driver updater that automatically updates your drivers. AVG Driver Updater will automatically detect your system specifications and maintain all of your drivers up to date. Its very user-friendly interface will guide you through the process of updating your old or defective drivers, resolving any remaining driver-related issues, and returning your PC to peak performance in no time
  • When you wish to experiment with a new game or application: Get a new game on your old PC or laptop, or even a classic like GTA 5 or Ark: Survival Evolved, on your old computer or laptop. First and foremost, ensure that your computer satisfies the minimal system requirements for the game. You will not be able to install it if this is not the case. If you’re overclocking your CPU or GPU, you should do the following: Overclocking your CPU or GPU refers to the process of adjusting your computer so that it performs quicker than it would otherwise with its default settings. Check your specifications and stress-test your CPU or GPU before you begin so that you are aware of your starting position. Overclocking your CPU and graphics card may be dangerous, so you’ll want to gather as much information as possible before you begin

No matter what you’re doing, keep reading our tutorial for Windows 10, 8, and 7 to discover how to view all of your PC’s hardware specs, including installed RAM, system summary, and information on your operating system, in one convenient location.

How and where to check your CPU, RAM, motherboard, and GPU specs

Windows provides you with a number of options for determining your hardware specifications. You can use one of the ways listed below to verify your CPU specifications and obtain further information, depending on the amount of detail you want.

Check your computer specs using Windows system settings

Your Windows system settings give a simple and handy method to examine the specifications of your computer. First, we’ll walk you through the process on Windows 10, and then we’ll walk you through the process on Windows 7.

Opening Windows system settings in Windows 10

Start by selecting Start, then opening yourSettings and selecting System.

ChooseAbout from the drop-down menu on the left. This will display your PC’s basic characteristics as well as the version of Windows that is currently installed on your computer. It is simple to copy and paste your specifications immediately from this screen.

Opening Windows system settings in Windows 7

Right-click on theComputericon and selectProperties from the drop-down menu. Listed below are the most important specifications, such as your CPU, available RAM, certain support numbers (which vary depending on the PC manufacturer), and the version of Windows you’re running on your computer. The information you’ll discover here isn’t particularly substantial, but it will suffice. If you want further information, select Device Manager from the menu bar on the left side of the screen and go through the list of devices (more on that below).

Check computer specs using the Command Prompt

Put on your (beneficial) hacker hat and press the Windows key + R to bring up the Run window on your computer. To launch the Command Prompt window, type cmd and hit Enter on your keyboard. Enter the command linesysteminfo into the text box and hit Enter. Your computer will display all of the specifications for your system; you will just need to navigate through the results to locate what you are looking for.

Check computer specs using the Device Manager

To bring up your computer’s Run window, put on your (helpful) hacker hat and press the Windows key and R together. To launch the Command Prompt window, type cmd and hit Enter on the keyboard. Enter the command linesysteminfo into the text box and hit Enter. Your computer will display all of the specifications for your system; you will just need to navigate through the results to obtain the information you want.

Check detailed computer specs using System Information

Let’s take it a step farther. System Information is the greatest and most comprehensive built-in tool for verifying the specifications of your computer. To access it, go to your Windowsmenu and type the phrase System Information into the search box. Windows will automatically locate it for you. System Information may be found by clicking here (or hitEnter). The tool that appears next is the most comprehensive, but also the most involved, method of determining your computer’s specifications. You can look up everything from your computer’s BIOS/UEFI version to the revision number of your motherboard, as well as all of the drivers and apps that are currently operating on your system.

You may use this tool to do the following:

  • Take a closer look at this. A built-in tool for verifying your computer requirements is System Information, which is the greatest and most detailed tool available. Select System Information from your Windowsmenu and start typing the keyword into the search box that appears. You don’t have to do anything since Windows will discover it. System Information may be accessed by clicking here (or hitEnter). In order to determine your PC specifications, you will need to use the next tool, which is the most comprehensive but also the most complicated. The BIOS/UEFI version of your computer, the revision number of your motherboard, and all the drivers and apps that are now operating on your computer are all accessible. Nothing could be much more specific than that, could it? It is possible to do the following using this tool:

Use a third-party tool to easily view all your specs

The built-in spec-hunting tools in Windows can be a little difficult to navigate. And with so much information available, it can be difficult to know where to begin. If you’re feeling overwhelmed, you might want to think about using a dedicated spec checking tool. Speccyis a free utility that shows your computer specs in a simple manner, allowing you to simply and quickly identify the information you want.

Get the best performance from your existing hardware

Using Windows’ built-in utilities or a free third-party application such as Speccy, you may quickly and simply discover all of the specifications of your computer. You may use these tools to find out all you need to know about your computer’s characteristics, whether you’re seeking for information about its RAM or CPU or just want to know which apps are currently loaded on your machine. Make sure your computer has regular maintenance and optimization to ensure that it gets the most out of the hardware beneath the hood and that it doesn’t become clogged with bothersome performance bottlenecks.

AVG TuneUp removes undesirable garbage from your computer, keeps your files organized, and monitors resource utilization to guarantee that your computer is running at peak efficiency at all times.

Leave a Comment

Your email address will not be published. Required fields are marked *