How To Format Fat32 Windows 10

Contents

How to Format USB Drives Larger Than 32GB With FAT32 on Windows

There is no option to format USB sticks larger than 32GB with the FAT32 file system in the standard Windows format tool, for whatever purpose this is. There are a few of ways to get around it. What File System Should I Use for My USB Drive? (See Related Article) FAT32 is a reliable file system for external devices, as long as you don’t intend to store or utilize files that are larger than 4GB. In order to be able to accommodate such bigger file sizes, you’ll need to use an operating system like NTFS or exFAT.

It is supported by every major operating system and the vast majority of devices, making it ideal for drives that need to be accessed from a variety of different platforms.

While FAT32 has a theoretical volume capacity limit of 16 TB, the current practical limit is around 8 TB, which is sufficient for the majority of USB flash drives.

One way uses PowerShell (or the Command Prompt), the other a free, third-party program.

Format Large USB Drives with FAT32 by Using FAT32 Format

WATCH THIS VIDEO TO FIND OUT WHAT A “PORTABLE” APP IS AND WHY IT MATTERS If you’re willing to download a free third-party tool, the GUI version of FAT32 Formatby Ridgecrop Consultants is the quickest and most straightforward method of formatting bigger USB sticks with FAT32 (click the screenshot on that page to download the app). Because it is a portable application, you will not be required to install anything. Simply execute the executable file. In the “FAT32 Format” box, pick the drive to be formatted and, if desired, type a volume label to identify the drive.

  • A warning message appears, informing you that all data on the disk will be erased.
  • Formatting with this tool is far faster than formatting with the command line approach mentioned in the next section.
  • One thing to keep in mind is that you’ll need to dismiss any File Explorer windows that are currently active before you can format the disk.
  • If this occurs to you, simply shut the File Explorer windows and attempt the operation again.

Format Large USB Drives with FAT32 by Using PowerShell

Use theformatcommand in PowerShell or the Command Prompt to format USB sticks bigger than 32GB using FAT32. The command syntax is the same in both programs, so you may use it in either tool. On the negative side, it might take a long time to complete this task. For our 64GB USB drive, formatting took about an hour; however, we’ve heard from others that formatting larger drives can take several hours or even several days. Aside from the time commitment, you won’t know whether or not formatting failed (which is unusual but possible) until the procedure is complete.

PowerShell with administrator capabilities may be launched by pressing the Windows key plus X on your keyboard, followed by the option “PowerShell (Admin)” from the Power User menu.

How to Format a Drive in FAT32 in Windows

A file system known as FAT32 is a flexible file system that has been in use for decades. ExFAT, which allows for greater file and partition sizes, and NTFS, which is the most widely-used and adaptable file system for Windows, have essentially superseded it, although it continues to be useful for older devices and for individuals who want a straightforward file format for their flash drives. As a result, whether you use the inbuilt utility or third-party tools, you may still convert flash devices to the FAT32 format in Windows (which offer more options).

What Is FAT32?

This file system, which is abbreviated as FAT (File Allocation Table), is frequently seen on USB flash devices. File allocation table (FAT) was first established in 1977 and is compatible with practically all operating systems. This implies that FAT files can be read by a wide range of devices, including Macs, PCs, Linux computers, and even smartphones. In part because to its near universal compatibility, the FAT32 file system is the best format for file sharing between different types of devices.

The Limitations of FAT32

Due to the fact that the FAT32 file system is so ancient, it has two fundamental drawbacks. On disks greater than 16TB, for example, the FAT32 file system cannot be utilized due to technical limitations. To be honest, this isn’t a tremendous deal for the majority of individuals. The second disadvantage of FAT32, on the other hand, might be a major source of frustration: FAT32 is incapable of handling individual files larger than 4GB in size. A more advanced file system called exFAT (extended file allocation) has taken the place of the older FAT32 file system.

The sole disadvantage of exFAT is that it was invented by Microsoft, which means that it owns all of the patents associated with it.

Unfortunately, this implies that while utilizing exFAT, there may be certain incompatibilities with other programs.

Format Using Integrated Tool

When it comes to formatting your flash devices, Windows 10 and 11 provide a convenient internal utility. Using the disk you wish to format that is already put in your PC, navigate to “This PC” and look for the drive under “Devices and drives.” Format the flash drive by selecting it with the right-click menu. When you are in the Format window, pick “FAT32” from the dropdown menu under “File system.” You may also adjust the size of your allocation unit. Generally speaking, you should keep this at its default setting; however, if the drive will only store huge files such as films and movies, you may increase this value all the way to 64 kilobytes, which can (some claim) speed up the reading of the data from the files.

When you click “Volume Label,” you may give the volume a name. If you want Windows to analyze the disk for errors before formatting it, pick “Quick Format” and deselect “Quick Format.” Finally, click “Start” to begin the formatting process.

Powershell (Command Line)

Powershell is another tool that may be used to convert a Windows drive to FAT32. Make sure that the storage device you wish to format in FAT32 is connected to your computer before you begin. Note the letter that is allocated to the drive when it is connected for the first time. Please keep in mind that you should always make a backup of your data before proceeding. Formatting the disk will completely wipe out all of the information presently saved on it. The Powershell command line may be accessed by right-clicking the Start button and selecting “Run” from the context menu.

  • Alternatively, you may hit the Windows key and the R key together to open the Run command box.
  • If you wish to format a drive in FAT32, open the Powershell window and execute the following command, substituting “F” with the letter of the drive you want to format.
  • You will notice a window informing you that all of the data on the drive will be erased before you proceed any further.
  • Just sit back and wait for your computer to finish its work; before you know it, your disk will be formatted in FAT32.

Third-Party Software

Powershell is another tool that may be used to format a Windows partition to FAT32. Make sure that the storage device you wish to format in FAT32 is connected to your computer before you begin. Note the letter that is allocated to the drive when it is first connected. Keep in mind that you should make a backup of your data before moving on. When you format a hard disk, all of the data that is currently stored on it is erased completely. To launch the Powershell command line, right-click the Start button and pick “Run” from the pop-up menu that appears.

  • If you prefer, you may start the Run command box by pressing the Windows key plus R.
  • The following command should be entered into the Powershell window after it has been opened, substituting the letter “F” with that of the drive letter you wish to format in FAT32.
  • Upon completion, you will be given a popup informing you that all of the data on your disk will be deleted.
  • Set aside some time to let the computer do its job, and your disk will be formatted in FAT32 before you know it!

1. Mini Aide FAT32 Formatter

For those seeking a simple and straightforward solution for formatting drives in the FAT32 format, Mini Aide FAT32 Formatter is a good choice. The interface is simple and straightforward, and it gives you with all of the information you need about your hard drives and their partitions.

Aside from that, Mini Aide allows you to create a new partition as well as remove or relabel an existing disk. This utility delivers all of the essential functionalities while also consuming extremely little RAM resources.

2. EaseUS Partition Master Free

It is safe to say that EaseUS Partition Master Free is one of the most widely used and popular programs for all of your partition-related needs. In addition, you may manage disk space, eliminate a partition, rename it, and do other operations on your hard drive. Even in the free edition of the application, it does not contain any advertisements, which is a significant advantage over other partition managers. Furthermore, you may convert drives and partitions into a variety of file systems, including FAT32.

3. Rufus

Rufus is a format conversion program that is compact, lightweight, simple to use, and highly effective. You may convert and build a bootable USB drive using this standalone utility, which supports a variety of file types. Because the software is only a little more than 1MB in size, it is fairly rapid in operation and allows you to build an ISO image on a USB drive. Do you want to continue to manage your computer in Windows? For further information, see our guides on how to reinstall DirectX in Windows and how to schedule shutdown and restart.

Is this article of use to you?

Android, Windows, and playing with vintage console emulation to the point of exhaustion are some of his favorite things.

Format to FAT32 for USB or External Hard Drive in Windows 10

When it comes to formatting to FAT32 on Windows 10/8.1/8/7, there are normally four options available to both average and experienced users. FAT32 is the most compatible file system when compared to other file systems. Any of the four techniques will work for flash drives, pen drives, or SD cards with capacities ranging from 2GB to 32GB. For larger capacities, any of the four methods will work. However, for USB flash drives, hard disk drives, or external hard drives with a capacity greater than 32GB, the available tools will be limited to the third-party USB format tool and the Windows Command Prompt.

  1. 1. A third-party USB format utility
  2. 2. The rapid format feature in Windows 10 Explorer
  3. 3. The format feature in Windows 10 Disk Management
  4. 4. The Windows Command Prompt

Can’t format to FAT32 in Windows 10 using any of the disk formatting tools that are provided? Continue to the last section to learn about more remedies for the “Cannot format to FAT32” error in Windows 10.

You might be interested:  How Do I Upgrade To Windows 10

What You Need to Know About File Systems

A file system is a type of computer system that regulates how data is stored and accessed. FAT16, FAT32, and NTFS, among other file systems, are the most often used in Windows. Users can convert the file systems on their USB flash devices or external hard drives between multiple formats. In the table below, we have included the characteristics of four common file systems, including information on everything from the maximum partition size to the file systems’ compatibility. Please keep in mind that formatting a USB drive or external hard disk will completely delete all of the data stored on the device.

Solution 1. Format to FAT32 Using FAT32 Formatter Windows 10

USB device requirements: noneA professional third-party Windows 10 FAT32 formatting program can make the formatting procedure straightforward and secure, and it is available for download here. We recommend that you use EaseUS Partition Master, which includes the Format feature.

In addition to FAT32, it enables the formatting of USB drives to NTFS, EXT2, EXT3, and ReFS. Please download and install this partition magic immediately, and then follow the easy instructions to format a USB drive to FAT32 in Windows 10.

  • Right-click the external disk or USB device that you want to format and select “Format” from the drop-down menu. To configure the Partition label, File system (NTFS/FAT32/EXT2/EXT3/EXT4/exFAT), and Cluster size, choose the appropriate options and click “OK.” To proceed, simply click “OK.” To format the hard disk partition, click on the “Execute Operation” button and then on the “Apply” button.

“Format” should be selected from the context menu of the external device or USB you wish to format. Set the Partition title, File system (NTFS/FAT32/EXT2/EXT3/EXT4/exFAT), and Cluster size, and then click “OK” to save your changes. For the next step, press “OK.” For example, to format a hard disk partition, click the “Execute Operation” button and then “Apply.”

Solution 2. Format to FAT32 Windows 10 via File Explorer

USB storage requirements are limited to no more than 32GB. Otherwise, the only option is to format the USB drive to NTFS. The following are the three procedures to convert a USB drive under 32GB to FAT32 in Windows 10 Explorer: Step 1: Connect a USB flash drive or an external hard disk to your Windows 10 computer. Step 2.Open File Explorer and identify the USB device by right-clicking on it and selecting “Format.” The FAT32 file system should be selected as the target file system. Select “Quick Format” and press “Start” to begin the formatting process.

And now your USB drive is formatted as FAT32.

Solution 3. Format USB/External Drive to FAT32 with Disk Management

To convert a USB drive to FAT32 within the software, the disk must be less than 32GB in size, similar to the criteria for using the Explorer. To format your hard drive to FAT32, follow the steps outlined here: 1. In Windows 10, go to This PCManageDisk Management and click on it. Step 2.Find your USB flash drive or external hard disk and right-click it; then pick “Format.” Step 3.Choose FAT32 as the file system for the USB drive, check “Perform a fast format,” and then click “OK” to confirm.

Solution 4. Format to FAT32 Windows 10 Using Command Prompt

There are no USB requirements. Some advanced users and administrators prefer to utilize command line interfaces to perform certain functions on their Windows PCs. Using this method, you may format your flash drive or external hard disk to FAT32 in Windows 10 as well. Note: When formatting a USB drive on your computer, use caution when utilizing command lines. Any erroneous procedures would result in significant consequences. The following are the specifics on how to format a device using the CMD, DiskPart, or PowerShell command lines:

Option 1. Use CMD – Command Prompt

Step 1: Enter the command prompt Type cmd in the Windows 10 search bar or by right-clicking on the “Windows icon” and selecting “Search.” Step 2.Right-click on “Command Prompt” and pick “Run as Administrator” from the context menu that appears. Step 3.Verify the USB label and typeFormat /FS:FAT32 into the command line. O:type “O” at the prompt and press “Enter.” (Instead of O:, use the drive letter of your USB drive to complete the sentence.) FAT32 formatting of a USB flash device or an external hard disk will be initiated by Windows 10 at this point.

Option 2. Use DiskPart

Step 1. In the Windows search box, type diskpart and press Enter. Step 2.Press Enter each time you write one of the command lines listed below to quickly format your hard drive:

  • Select disk 2 from the list of disks (replace 2 with the number of your USB drive)
  • Volume 10 (replace 10 with the volume number of the USB disk that you wish to format)
  • List volumes
  • Pick volume 10 format fs=fat32 in a hurry

Step 3.When DiskPart states that it has successfully formatted the USB drive, type exit and click Enter to leave the application and close it.

Option 3. Use PowerShell

Start by selecting “Windows PowerShell Admin” from the context menu of the Windows icon. Click “Yes” to launch the PowerShell administration console. Step 2.In PowerShell, run the command Format /FS:FAT32 o: in the USB drive label and press the Enter key. Step 3: When the formatting process is complete, typeexit to exit.

Additional Fixes for “Cannot Format to FAT32” in Windows 10

Don’t be concerned if you encounter a difficulty while formatting a USB drive or if Windows notifies you that the format could not be completed. In this section, you will learn why you are unable to format to FAT32 in Windows 10 and how to properly address this issue.

Reasons for Why You Can’t Format to FAT32

The causes of your inability to format devices to FAT32 must be identified in order to choose the best solution for your situation. The following are the primary reasons:

  1. 1. A file system problem has occurred, and faulty sectors have been discovered on the USB/external hard disk. 2. There are two partitions on the USB device, or the partition that has to be formatted to FAT32 is not the first primary partition. 3. The partition on a USB flash drive or external hard disk is greater than 32GB in size. 4. The USB disk or external hard drive is secured against being written to

So, how can you overcome these concerns by changing the format of your USB drive to FAT32? To address the problem with the FAT32 format in Windows 10, use the fast workarounds listed below.

Fix 1. Check disk error, fix file system errors or soft bad sectors

Changing the format of your USB device to FAT32 should alleviate these difficulties. To address the problem with the FAT32 format in Windows 10, use the short workarounds provided below:

Fix 2. Delete all partitions and create a new FAT32 partition on USB drive

If your Windows system (version prior to Windows 8.1) or your USB drive does not enable the creation of two primary partitions, the computer will not be able to identify or convert the non-primary partition on the USB drive to FAT32, and the computer will crash. Delete all existing partitions on the USB drive and build a new FAT32 partition are the only solutions to this problem. Step 1. Connect the USB device to the computer and launch Disk Management. Step 2.Select “Delete Volume” from the context menu of the primary partition on the USB drive, and then click “Yes” to confirm.

Step 4.To confirm, press the “Yes” button.

7.Follow the on-screen directions to define the volume size, drive letter, and file system to FAT32 before clicking “Next” and then “Finished” to finish the process.

Fix 3. Select NTFS as the file system or split USB larget partition to smaller FAT32 partitions

In accordance with the chart at the outset, the maximum size of a FAT32 partition is 32GB, which implies that you can only format devices with a capacity of less than 32GB into this file system. To put it another way, if your USB drive partition is greater than 32GB, you will be unable to turn it into FAT32 format. There are three options for dealing with this problem:

  • Format the USB drive in FAT32 with EaseUS Partition Master (method one).

Unlike the built-in utilities in Windows, EaseUS Partition Master can quickly and easily format your USB drive, even if it is more than 32GB in size, to FAT32.

All that is required is that you return to the partition manager and immediately format your USB drive to FAT32 without any restrictions.

  • The second method is to select NTFS as the file system for your USB device.

NTFS is capable of storing a single file that is greater than 4GB in size and of generating a partition that is larger than 32GB in size. If you simply want to maintain one partition on the USB drive and want to make maximum use of the available disk space, the NTFS file system is the best option. Method 3: Create tiny USB partitions (less than 32GB each) using the FAT32 file system. The third option is to divide the USB partition into several smaller ones and format each of them as FAT32: Before you begin, make sure your Windows operating system (versions after 8.1) and your USB drive both support two or more partitions.

Step 2.Use the FAT32 file system to partition your hard drive into two or more smaller partitions than 32GB.

Fix 4. Remove USB write protection and format USB to FAT32

The FAT32 file system cannot be directly formatted on a USB device that has been written-protected or protected with a password. The following are the specific measures to take in order to address this issue: Step 1: Disable USB write protection and unlock the USB device. Remove USB write protection on Windows 10/8/7 by following the instructions in this page. EaseUS M Tool, on the other hand, may be used to quickly and easily remove the USB lock in three simple steps: Don’t be concerned if you don’t consider yourself a seasoned computer user or if you’re not comfortable with command-line interfaces.

  • This tool, EaseUS CleanGenius, is one of those that can assist you in resolving the issues mentioned above on your drives without the need for any command-line experience.
  • Step 1: Download and install EaseUS CleanGenius (which is a free program) on your PC.
  • 3) Select the device that has been write-protected and click Disable to disable the protection.
  • Following the removal of the USB write protection, you can use any of the options listed in Part 1 to convert your USB drive to FAT32 format.

Final Word

This article describes how to format a USB flash drive or an external hard drive in FAT32 and how to handle the problem of being unable to format a USB flash drive in FAT32. Moreover, it has useful options for formatting devices larger than 32GB into FAT32 without losing any data. If you wish to convert devices into NTFS without having to format them, see How to Convert FAT to NTFS for further information and instructions.

How to Format a USB Drive to FAT32 on Windows 10

You’ve come to the correct spot if you need to format a USB flash drive, hard disk, solid state drive, or other type of storage device to FAT32.

In this post, we’ll discuss what a file system is, what the FAT32 standard is, and how to format a storage device to use the FAT32 file system under Windows 10.

What’s a file system?

A file system is a standardized method of organizing data on a computer storage device such as a flash drive or hard disk drive (hard drive). It’s almost like having a wall of post office boxes divided up into virtual compartments on a storage device, and a file system maintains track of all the information that gets put in each box. ExFAT is one of the most used file system formats for portable storage devices, and it is derived from the FAT32 file system.

FAT32 compared to other formats

FAT32 is the oldest and most extensively supported of the three most often used file formats. Every major operating system will enable you to read and write to a USB flash drive that has been formatted in the FAT32 file system. MacOS, on the other hand, can only read NTFS-formatted disks, and you would have to install third-party software in order to write back to the disk. In contrast to newer formats like NTFS and ExFAT, whereas FAT32 is widely accepted, its maximum disk and file sizes are severely restricted: When compared to older formats like NTFS and ExFAT:

Max drive size Max file size Windows macOS Linux
FAT32 32 GB (Windows), up to 16TB (Other OSs) 4 GB Read/Write Read/Write Read/Write
NTFS 8 PB* 16 EB** Read/Write Read Read/Write
ExFAT 128 PB* 16 EB** Read/Write Read/Write Read/Write

* A petabyte is about one thousand terabytes, while an exabyte is approximately one million terabytes. It should be noted that the maximum disk and file size of NTFS and ExFAT are both so enormous that there is almost no limit to their use. (However, it would be good to have a USB drive with a storage capacity of 128 PB, wouldn’t it?) The maximum file size of 4 GB for FAT32, on the other hand, is practically nothing today that smartphones are capable of recording 4K films. Additionally, formatting a disk bigger than 32 GB under FAT32 on Windows 10 is a little more challenging.

Take, for example, the situation when you need to start up an old computer, maybe with a different operating system, in order to save some of its contents.

For those of you who are certain that you want to use FAT32, here’s how to format a storage drive on Windows 10.

In fact, make two backups and store one of them on a cloud-based service such as Google Drive or Dropbox for safety.

How to use Windows File Explorer to format a USB drive to FAT32

A short word on this method: it is only compatible with USB flash devices that have a capacity of less than 32 GB. If your USB drive has a capacity more than 32 GB, you should consider one of the following ways. Now that everything is out of the way, connect your USB drive to your computer and launch Windows File Explorer on your PC. Afterwards, right-click on the drive icon on the left-hand side of the File Explorer window and select “Format” from the context menu: Make sure that the “FAT32” option is chosen in the window that appears.

You might be interested:  How To Check Cpu Temp On Windows 10

To format your drive, simply click the start button.

You may double-check your USB drive’s status by opening File Explorer and selecting “Properties” from the context menu. A window will appear, and you should be able to see that the file system has been changed to FAT32:

How to use Rufus to format a USB drive to FAT32

If your USB drive has a capacity greater than 32 GB, you’ll need to format it with a third-party tool such as Rufusto. Rufus is a compact and portable application that can format USB flash devices. There are many more tools that can do the same thing. This implies that you may load Rufus on a USB drive and connect it into any Windows machine to format additional disks while on the road. After you have downloaded Rufus, run it by double-clicking on the.exe file to begin using it. Check to ensure that your USB drive is chosen.

Following that, pick “FAT32” from the “File system” selection menu.

It will be formatted to FAT32 in a matter of seconds after that.

How to use PowerShell to format a USB drive to FAT32

Despite the fact that this approach is compatible with disks larger than 32 GB, it is extremely sluggish – formatting a 32 GB drive, for example, might take up to an hour, depending on your computer. However, if you are unable to utilize the previous two procedures due to a variety of circumstances, this will suffice in a pinch. To begin, click on the Windows Search Bar and put “powershell” into the search box. Then, to run PowerShell with elevated rights, select “Run as administrator” from the context menu: The following command should be entered into the PowerShell terminal: DRIVE LETTER: format /FS:FAT32 DRIVE LETTER: To double-check your drive letter, use the File Explorer program.

To begin, hit the Enter key twice, making sure your USB drive is inserted in between each push.

Once theformatcommand is done, your disk should be formatted to FAT32.

In closing

You should now be able to format any USB drive, regardless of its size, to FAT32 on your Windows 10 computer. All three of these methods may be used to format your hard drive to a different file system, such as NTFS or ExFAT, with only minor modifications to the original code. Now get out there and format all of your USB flash devices and memory cards. (However, only after you have backed up anything that is important!) Was this information useful? Is there a more effective way that you are aware of?

Learn how to code for nothing.

Get started today.

Formatting USB drive to FAT32 file in Windows 10

We recommend that you try a lower page number. * Please enter only numbers. * We recommend that you try a lower page number. Please only enter digits in this field. Hello, Rom. Thank you for taking the time to post on Microsoft Community. We are grateful for your interest in Microsoft Windows 10. We will work with you to find a solution to your problem. Before I can assist you further, I’d like to ask you a couple of questions about the situation that you’re in. Is the problem limited to a single USB disk or is it more widespread?

  • Did you receive any sort of error notice when you attempted to format the drive?
  • In order to format your USB drive to FAT32, follow the instructions listed below: Step 1: Connect your USB drive to the device and select the option to “Open folder to see files” from the drop-down menu.
  • Select FAT32 from the File System drop-down menu in the window that appears.
  • Step 5: When you’re finished formatting, click on the OK button.
  • We will be pleased to assist you with any Windows-related difficulties that you may be experiencing.
  • This reply was useful to 74 people.
  • Was this response of assistance?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

In response to your queries, the USB device is fully functional with my PC.

When I choose the file system, I am presented with two choices: NTFS or exFAT.

The player’s documentation specifies that it must be formatted as FAT12/16/32.

This reply was useful to 90 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

Thank you for keeping us informed about the status of this question.

We apologize for the inconvenience.

Thank you very much.

Did you find this reply helpful?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

In response to a previously deleted message That’s helpful to know so that I don’t have to waste time hunting for one.

The drive I was attempting to format has a capacity of 64G, however the DOS format command fails at any size more than 32G.

I anticipate that in the future, more people will find this to be an annoyance because auto type players that take USB disks are not updated as frequently as software.

This reply was useful to 19 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

Available as an ISO file that can be used to make a bootable CD.

If you don’t have access to a CD or DVD drive, there is a program called Y.U.M.I PenDrive Linux that will allow you to install Linux on a bootable flash drive instead.

Did you find this reply to be helpful?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

I’m not sure whether you’ve figured it out yet, but you may try using Macrorit Disk Partition Expert to see if it helps.

This reply was helpful to 15 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

According to this page, if the drive is 32 GB in size, FAT32 is not officially supported.

Did you find this reply helpful?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

Is it true that Windows 10 does not have the option to format in fat32?

Did you find this reply helpful?

Great!

What level of satisfaction do you have with this response?

What level of satisfaction do you have with this response?

Is it true that Windows 10 does not have the option to format in fat32?

3 people found this response to be helpful.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

MS, get a move on!

Sending people to third-party products is exactly the wrong response when malware continues to be a severe concern, particularly for Microsoft Windows users.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

What level of satisfaction do you have with this response? Thank you for taking the time to provide comments. * Please try again with a lower page number. Please input just digits. * Thank you. Please try again with a lower page number*. Please only enter digits in this field.

Format Your Drive with Free FAT32 Formatter Windows 10

“I attempted to format a hard disk to FAT32, but the Windows 10 Disk Management tool was unable to complete the task. Furthermore, it only supports NTFS and exFAT file systems. What is the best way to format this disk as FAT32? Is there anything you can suggest?”

Why cannot format hard drive into FAT32 in Windows 10?

Is it possible for Windows to format a hard disk into FAT32? Why? First and foremost, you must be familiar with the FAT32 file system. FAT32 is a type of file system that is ideal for hard disks with limited storage space. It was created in order to circumvent the 2GB partition restriction of the FAT operating system. There is a limit to the size of a single file that it can support: 4GB. In some cases, if the partition capacity of your hard drive, flash drive, or SD card is greater than 32GB or the maximum file size of a single file is greater than 4GB, you may find that the built-in Windows program is unable to effectively convert your drive to FAT32.

Best free FAT32 formatter Windows 10

Use the built-in Windows program to format a hard disk, flash drive, or SD card into FAT32. This process may be performed on any of these devices. The following are the particular measures to be taken: 1. To open the Disk Management, click “Windows” + “R” at the same time to bring up the Run box, then type “diskmgmt.msc” and hit the “Enter” key to launch it. 2. Select “Format” from the context menu of the drive you wish to format. 3. 3. To begin formatting, pick the FAT32 file system (or whichever file system you want) and then click “OK.” If you encounter the difficulty that the built-in Windows utility is unable to effectively format your hard disk into FAT32, you can resort to third-party applications to complete the task successfully.

The program may be used to format your computer’s hard disk, flash drive, SD card, and any other storage device running Windows 11/10/8/7, Windows Vista, and Windows XP.

How to format hard drive, flash drive, or SD card with AOMEI Partition Assistant

Using the built-in Windows program, you may format a hard disk or a flash drive or an SD card into the FAT32 file system. Specifically, these are the actions that must be taken: 1: To open the Disk Management, simultaneously press “Windows” + “R” to bring up the Run box, then type “diskmgmt.msc” and click the “Enter” key to launch it. Select “Format” from the context menu of the drive you wish to format. 3. To begin formatting, pick the FAT32 file system (or whichever file system you want) and press “OK.” It is possible to use third-party software to format your hard drive into FAT32 if you encounter the difficulty that the Windows built-in program cannot correctly format your disk.

If you have a Windows 11/10/8/7 computer and want to format a hard disk, flash drive, SD card, or any other type of storage device, you may use this tool.

  • Please do not use your computer until the formatting procedure has been completed
  • Otherwise, your computer may become unresponsive. Formatting does not completely remove the data from a computer. However, AOMEI Partition Assistant Pro, which includes the SSD Secure Erase feature, may be the best hard disk cleaning software available. As a result of the 4GB restriction of FAT32, if you need to keep certain huge files on the partition that are more than 4GB in size, we recommend that you use NTFS as the partition type.

Conclusion

You can format your storage drive into FAT32 or any other file system on Windows PCs with ease and effectiveness if you follow these straightforward instructions. AOMEI Partition Assistant is one of the most effective free FAT32 formatters available. The format partition functionality can also assist you in resolving errors such as the present read only state yes issue. Aside from that, it also offers many other useful features, such as the ability to resize, relocate, and remove partitions, copy files across hard drives, migrate operating system to SSD, and erase hard drive, among others.

How to Format Drive in FAT32 in Windows 10

For hard drives, FAT32 is one of the most widely used and adaptable file formats available. These are the procedures to take in order to format a disk as FAT32 in Windows 10. FAT32 is no longer available as a format choice for disks greater than 32GB in current versions of Windows 10, according to Microsoft. This is due to the fact that the file format is rather ancient and has some serious restrictions. Examples include the fact that individual files more than 4GB in size cannot be stored on a FAT32 formatted disk.

Having said that, huge hard drives can still be formatted in the FAT32 format.

Allow me to demonstrate.

Formatting can completely wipe all of your data.

Command to Format Drive in FAT32

The FAT32 file system may be formatted on huge hard drives with a single line of code. Because we will be utilizing the command prompt, you will need to know the drive letter of the disk before you can format it. This is due to the fact that we require the drive letter in order to target the drive. Install the USB device and launch the File Explorer program first. 2. Identify your USB drive in the File Explorer and make a note of the drive letter it contains. After that, we’ll require it for the following step.

  1. You may also use the run commandcmd command to complete the task.
  2. In the command prompt window, type the command shown below.
  3. For the sake of this example, the drive letter D is used.
  4. Depending on the size of the disk, the formatting operation may take a considerable amount of time.

5. As a result, input a name and hit the Enter key. 6. Once the formatting has been completed successfully, you will receive the message “Format complete.” Having done so, you have successfully formatted the disk under the FAT32 file system.

PowerShell Method

To format a disk in FAT32 format, you may use the PowerShell in the same way that you would with the command prompt. To begin, locate PowerShell in the start menu and click on it. 2. In the PowerShell window, type the following command, substituting Drive Letter with the actual drive letter. 3. Format /FS:FAT32 (File System) Drive Letter: 3. Depending on the size of the hard disk, formatting the drive may take a long time. This is due to the fact that the command above does not perform a fast format.

You might be interested:  How To Ss On Windows 10

Enter the name of a new drive into the text box.

5.

Use a Free Third-Party Application

In the event that you are not familiar with the command prompt or PowerShell, you may utilize FAT32 format, which is a free and portable piece of software. 1. First, download the FAT32 Format program from the official website and run the exe file that has been downloaded. Because it is portable software, there is no need to install it on your computer. On the main page, choose the drive that you wish to format in FAT32. 3. Specifically, I want to format a USB drive under the FAT32 file system.

  • 3.
  • After you have completed this step, click on the “Start” button.
  • For the next step, click on the “Yes” button.
  • The software will format your hard disk in the FAT32 format in an instant.

3 Ways To Format 32GB+ USB Drives To FAT32 In Windows 10

Here is where you may learn about three different ways to format 32GB+ USB drives to FAT32. In Windows 10, there is a new feature called Windows Hello. Microsoft Windows 10 does not allow you to format external USB sticks with capacities more than 32GB with the FAT32 file system. For USB devices bigger than 32GB in size, the format tool dialog only provides the NTFS and exFAT file systems as options. Despite the fact that NTFS is the file system of choice for Windows 10, customers who frequently need to use their USB external drives with other operating systems such as macOS and Linux may wish to convert their USB drives to FAT32 in order to ensure that they are compatible.

We must either use the disk utility from the Command Prompt or use a third-party application to format the USB drive to the FAT32 file system, because the Windows 10 format utility does not allow you to convert USB devices bigger than 32 GB to the FAT32 file system.

Keep in mind that the FAT32 file system does not handle files more than 4GB in size before we show you how to format your USB drive using the FAT32 file system. As a result, you will not be able to transfer files greater than 4GB in size into FAT32 storage devices. Method number one of two

Use Command Prompt to format USB to FAT32

Please keep in mind that formatting big USB sticks to FAT32 may take many hours on some computers. If you are unable to wait for several hours, please make use of the tool described in Method 2 of this article. IMPORTANT: When you format a hard disk, all of the data on the drive is erased. Please make a copy of all of your data and save it somewhere else before continuing. To convert your disk from NTFS to FAT32 without losing any data, you can use the utility described in Method 3 (see Resources) (scroll down to see).

  • Make sure you’re running the Command Prompt as an administrator.
  • When you see the User Account Control page, select Yes from the drop-down menu.
  • To open the Command Prompt window, type the following command in the text box.
  • Format /FS:FAT32 X: Format /FS:FAT32 If you wish to format a USB flash drive to the FAT32 file system, substitute “X” for the actual drive letter of the USB flash drive that you want to format.
  • When prompted to carry out the order, press the Enter key.

Format USB drives to FAT32 using FAT32 Format tool

In the event that you do not wish to utilize the Command Prompt, you may download this free program that can format USB sticks bigger than 32GB to the FAT32 file system instead. Download and execute the FAT32 Format tool in Step 1. In Step 2: Select your USB drive and then pick the Quick format option. The disk will then be formatted to use the FAT32 file system as a result of clicking the Startbutton. The drive will be completely wiped of any data. Almost all of the third-party partition management programs available today enable formatting a 32GB or larger hard disk to the FAT32 file system.

Method number three of three

Convert NTFS to FAT32 without losing data

There are a plethora of third-party applications available to assist you in converting NTFS disks to FAT32 without losing data, but they are not inexpensive. While there are some free applications available, they are only compatible with tiny USB flash devices. All three of these programs, Partition Wizard, Partition Master, and AOMEI NTFS to FAT32 Converter, allow you to convert NTFS disks to FAT32 without losing any data, however none of them are free! There is a convert program included into Windows, however it can only convert from FAT32 to NTFS, not the other way around!

Please let us know if you know of a true free application (with no restrictions) that can convert NTFS to FAT32 without causing data loss in the process.

How to Format USB drive in FAT32 in Windows 10

You will learn the following information:

  • This article will explain why your USB flash drive cannot be formatted on Windows 10.

Are you ready to take on the world? Let’s get to reading!

Why I can’t format an external drive in FAT32 on Windows 10?

At first look, this appears to be weird, and such inquiries are totally legitimate. It is not possible to format a USB device into FAT32. With so many file systems available at the present, many people are unfamiliar with the FAT32 format for Windows 10. This is because the FAT32 format has been in use for so long and has so many features and restrictions. However, because you require this specific file system and are unable to format to FAT32 on Windows 10, you must first determine why this is occurring.

The fact that if you have any large files (4 GB or more), the FAT32 file system will not be able to manage them is another factor to keep in mind.

About the FAT32 file system

It is fair to say that the FAT32 file system is the “great-grandfather” of all other file systems. It has several applications, is universally applicable, is simple to use, and is still widely used today, particularly in mobile devices. The majority of manufacturers do not overlook it and include this file system as the initial one in their gadgets. FAT32 may be used with any operating system and is completely compatible. If you want to format an external drive in FAT32 for Windows 10, we recommend that you utilize one of the techniques listed below.

Method 1. Format USB drive into FAT32 with Command Line

You may always rely on the old and trusted command line for assistance. After connecting the external media (USB flash drive) to the computer, select Start from the Start menu. Choose “Command Prompt (Admin)” from the drop-down menu. A new window will open, and you’ll need to type in “Diskpart” to proceed. The following command should be used after selecting the flash disk: “format fs = FAT32 fast.” Now hit the Enter key. Once the formatting procedure is complete, all that is left to do is restart the computer to complete the process.

In the event that you are unfamiliar with CMD and would want to format an external drive into FAT32 in a different manner, please check Method 2.

Method 2. Format USB drive into FAT32 with PowerShell

In order to format an external drive into FAT32 in Windows 10 in this manner, you must hit the Windows key and the X key simultaneously. In a new window, select “PowerShell (Admin)” from the drop-down menu. PowerShell is used to do this. Then a new line appears, on which you should type the following: “Format / FS: FAT32 R:” After that, a new line appears, on which you should type the following:

  • Your flash drive’s letter R has to be replaced with the letter R of a different letter.

Format a USB drive into FAT32 using PowerShell on Windows 10Now hit Enter and then wait for a long time to see whether the formatting is successful. The process may take many hours if you are not really fortunate.

Remember!

On Windows 10, use PowerShell to format a USB drive into FAT32 format.

Then hit Enter and wait for a long time. If you are not really fortunate, it may take many hours.

How to Format USB to FAT32 in Windows 10? – 3 Methods

Is it possible to format a USB flash drive with a capacity of 64GB or greater to FAT32 in Windows 10? During the course of using the computer, your USB drive may get in RAW format, and you will need to format it in order for it to operate again. If you have a significant number of little files on a big USB drive, formatting the disk is also the most effective method of clearing the content. Some customers have inquired as to what the best way is for formatting a USB drive into FAT32 in Windows 10.

The following article discusses three different approaches of formatting a USB drive in Windows to FAT32 format.

Solution 1. Format USB drive to FAT32 by using DiskGenius Free Edition

DiskGenius Free Edition is a free USB formatter that may be downloaded and used in step one. Step 2: Select the USB device that you wish to format, and then select the “Format” toolbar button or the “Partition”””Format Current Partition” menu item in the toolbar. In addition, you may right-click the partition that needs to be formatted and choose the option “Format Current Partition” from the context menu that appears. The “Format Partition” dialog box will appear, as seen in the screenshot below.

  1. You can also select to do a surface scan to look for faulty sectors during the formatting process, which might be a time-consuming procedure to complete.
  2. If any faulty sectors are discovered during the scan, the formatter marks them as such so that they are not utilized to store data in the future.
  3. Using the FAT32/FAT16/FAT12 file systems on a primary partition and the “Create DOS System” check box enabled, the “Create DOS System” option becomes accessible.
  4. Step 4:In the event of a problem, the application will ask for confirmation before proceeding with the formatting procedure.
  5. Attention: Because formatting will completely wipe out all of the data on the USB device, you should make a backup of any vital information before proceeding.

Solution 2. Format USB flash drive to FAT32 file system in Windows File Explorer

USB requirements: If the USB drive has a capacity more than 32GB, the FAT32 file system will not be accessible. If your USB drive has a capacity more than 32GB, you should format it with DiskGenius software. In Windows 10 Explorer, take these three steps to convert a USB device that is less than 32GB in size to FAT32 format: Step 1: Connect the USB device to a computer running Windows 10. Step 2.In File Explorer, find and right-click on the USB device, then pick Format from the context menu. Step 3.Choose FAT32 as the target file system, choose “Quick Format,” and then click “Start” to begin the formatting procedure.

Step 4.When Windows informs you that formatting will destroy all data on this drive, click the “OK” option. Click OK to check that the procedure has been completed successfully. Your USB drive is now formatted as FAT32.

Solution 3. Use Diskpart command to format FAT32

USB drive requirements: If the USB drive is greater than 32GB, the FAT32 file system will not be accessible. If your USB drive has a capacity more than 32GB, you should format it using DiskGenius. Follow these three steps in Windows 10 Explorer to convert a USB disk that is smaller than 32GB to FAT32: To begin, connect a USB flash drive to a PC running Windows 10. Format the USB drive by locating it in File Explorer and selecting it with the right-click menu. Choosing FAT32 as the target file system, selecting “Quick Format,” and clicking “Start” to initiate the format are all steps in this step 3.

Click OK to ensure that the procedure has been completed.

FAQ: What is FAT32 format and why is it chosen?

When it comes to detachable storage devices, FAT32 is one of the file system types that are often employed. It makes use of a 32-bit file allocation table to improve the ability to manage drives, hence overcoming the FAT16 limitation of only allowing individual files up to 2GB in size. Theoretically, FAT32 can hold files with a total capacity of up to 4GB. Although this is true in theory, in fact, not all USB drives can be converted to FAT32 in Windows; specifically, Windows does not enable formatting a partition bigger than 32GB to the FAT32 file system.

Despite the fact that it lacks some current features, it has a better level of interoperability and can nearly be used with a variety of operating systems and electronic devices.

Quick Links

  • How to format a USB flash drive in Windows to FAT32, exFAT, or EXT4
  • The following are four methods for reformatting a hard drive in Windows 10/8/7: The procedure for formatting the C drive in Windows 10/8/7 is as follows: How to format a corrupted or RAW SD card in FAT32, exFAT, or NTFS format for free.

Leave a Comment

Your email address will not be published. Required fields are marked *