How To Fresh Install Windows 10

Contents

How to: Perform a Clean Install or Reinstall of Windows 10

We recommend that you try a lower page number. * Please enter only numbers. * We recommend that you try a lower page number. Please only enter digits in this field. Andre, This is an excellent essay. This is really evident. Your step-by-step tutorial, on the other hand, does not address a difficulty that I’m encountering. I am able to successfully complete the stage just before the OOBE. My computer boots up again, but it defaults to the DVD drive, which is still installed. Afterwards, I am given the option to reboot from a CD or DVD by pressing any key.

My computer will simply shut down if I don’t press any keys.

Dennis Success.

I’ve gotten everything up and running now.

  • Was this remark of assistance?
  • Great!
  • What level of satisfaction do you have with this comment?
  • What level of satisfaction do you have with this comment?
  • This is strange, what is your default boot device in the BIOS, is it a hard drive or a DVD drive?
  • Best, Andre MVP-Windows and Devices for IT (Windows Insider MVP-Windows and Devices for IT) ADACOSTA on Twitter and at GroovyPost.com This remark was deemed to be useful by 15 people.
  • Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

If I create the hard drive first, I will be unable to boot from the DVD to begin the installation process.

While trying to install a slew of updates, I discovered that I could no longer boot from my hard drive.

But I’m not convinced that’s the source of my difficulties.

To restart, use the keys Ctrl+Alt+Del.

This comment was useful to 14 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

The answer is simple: you would need to reinstall Windows 10.

This occurs immediately before the OOBE: As soon as this phase of setup is over, Windows will automatically restart and enter the setup process once more.

If your machine is equipped with more than one hard disk, tell us about it.

If you do, make sure to unplug them before proceeding with setup.

Did you find this comment helpful?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

Andre, I’m not a member of the OOBE.

However, as I said in the update to my initial post above, I was able to retrieve the DVD in time for my PC to start from the hard drive instead of the DVD drive itself.

Thank you for the article and for your assistance.

Was this remark of assistance?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

Understandable, however we require an iso or a file that can be used to create a bootable disk for the primary operating system.

This remark was useful to 25 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

I was disappointed to learn that I would be unable to use the upgrade to perform a clean install from the outset.

Was this remark of assistance?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

So, I’d want to ask you a question: I’ve completed the free upgrade of my Windows 7 operating system and now wish to reinstall Windows 10 utilizing a clean installation procedure.

This is the funny part: when I run the MGADiag.exe application to verify the authenticity of the installation, it displays a key that looks precisely like the Windows 10 Insider Preview Key.

To do this, multiply Cur by 256, and then multiply Cur by Cur * 256, and then multiply Cur by Cur * 256, and then multiply Cur by Cur * 256, then multiply Cur by 255, and multiply Cur by Cur Mod.

I have now updated a second Windows7 license as well, and when the key is extracted, it appears to be the same as the first.

I did not utilize a Microsoft Account, and I will not be persuaded to do so in the near future.

Was this remark of assistance?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

Do you have the same difficulty as I do?

Windows 7, Windows 8.1, and now Windows 10 10 This remark was deemed to be useful by 15 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

Afaik: As soon as I update to Windows 10, my Hardware-Setup is stored in a Microsoft database and tied to a free Win10 license.

Yes, there is a lot of information regarding this, but it comes from third-party sources.

What happens if my hardware changes AFTER the one-year period following the release of the software?

As an alternative, is it possible for me to at least utilize my ‘old’ Windows, which I previously used to upgrade to Win10, or is the license no longer valid (you state that one can only ‘go back’ for 30 days).

According to my understanding, the license cannot be ‘invalidated’.

Officials from Microsoft have not responded to any of the inquiries.

This comment was found to be useful by 32 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

What level of satisfaction do you have with this comment? Thank you for taking the time to provide comments. * Please try a page number that is lower than the current one. * Please insert just digits in this field. The page number should be reduced, if possible. Only numbers should be entered.

How to do a Clean Install of Windows 10 the Easy Way

Old data, settings, and applications from your prior Windows system are transferred over to your new Windows system as part of the Windows 10 upgrading process. With a clean install, Microsoft gives you the option of starting with a completely fresh system. This is particularly beneficial if you’ve just acquired a new Windows 10 PC that comes pre-installed with bloatware that you don’t want or need. Alternately, you may need to conduct a clean install on a machine that does not already have a Windows operating system installed after installing a new hard drive.

To obtain DVD playback, you may always install VLC or utilize one of the more fully featured Windows Media Center competitors, which are both available for free.

At one point in the past, customers were compelled to upgrade to Windows 10 before they could start again and perform a clean install, which was a very convoluted and time-consuming process.

Option One: Create Installation Media and Install Windows from Scratch

Where to Legally Download Windows 10, 8.1, and 7 ISOs (Related) With Windows 10, the traditional approach of completing a clean installation is still our preferred technique. You only need to download and prepare installation media, which may be either a DVD or a flash drive, and then install it from that media. Microsoft offers a free download of the Windows 10 media production tool. This application will download the right Windows 10 installation files for your machine and will guide you through the process of creating an installation DVD or USB flash drive using those files.

Choose the appropriate type of installation disk for the version of Windows 10 that has been licensed for your computer — either Windows 10 Home or Windows 10 Professional.

The 64-bit version will be preferred by the vast majority of users, but you may build installation media that contains both versions, and the installer will automatically choose the most appropriate one when you use it to install Windows on a computer.

Start your computer with the USB drive or DVD drive installed, and choose that device as the boot device.

Once the Windows installer begins, select “Install Now” to begin the installation process. Following that, you’ll be presented with the activation screen. What you do here is determined on your current situation:

  • If this is the first time you’ve installed and activated Windows 10 on this machine, you’ll see the Windows 10 activation screen. In this field, type in your Windows 10 product key. Please insert your valid Windows 7, 8, or 8.1 key here instead, in the event that you do not have one. If you’ve already installed and activated Windows 10 on this machine, choose “I don’t have a product key.” Otherwise, select “I don’t have a product key.” Once Windows has been installed, it will begin to operate automatically.

The second scenario is possible because of the way Windows 10 activates computers. As part of the first installation and activation of Windows 10 on a system, the installer verifies that you have a “genuine Windows” system installed and registers your hardware with Microsoft’s cloud-based servers. If all goes well, you shouldn’t have to input the key again on the same computer since Microsoft will detect your hardware the next time you install Windows 10 on that machine, validate that it’s registered, and then automatically activate the operating system.

  • When conducting a clean install, make sure to select the “Custom” option to ensure that you are not executing an upgrade install.
  • The installer will replace any existing partitions on your computer if you just have one Windows partition.
  • It should immediately activate itself once you connect to the Internet on your new, freshly installed Windows 10 PC after you log in for the first time.
  • Select the “Activation” tab from the drop-down menu after clicking the UpdateSecurity button.
  • In addition, take note of the Windows 10 edition that you have installed – either Windows 10 Home or Windows 10 Pro.
  • When we reinstalled Windows 10 Pro on our machine, it was enabled very soon after installation.
  • If it is not enabled, you may be able to find information below that may assist you with activating it.
  • If an activation is not occurring automatically after going through the processes outlined above, the following command can be used to compel it to occur.
  • Enter the following command: slmgr.vbs /ato into the command line: Many users have reported that they have to run this command multiple times.

If you see an error notice, try restarting your computer and running it again, waiting and running it again, or simply waiting and allowing Windows to activate itself. It’s possible that Microsoft’s servers are overloaded at the time you’re attempting to activate.

Option Two: Perform a Reset and Remove Everything

In the event that you’ve previously updated to Windows 10 and wish to perform a new installation, there is a simpler alternative. You may utilize the Reset option to restore your Windows 10 machine to its factory default settings. If you installed Windows 10 on your own computer, this should provide you with a whole new Windows system in no time. There are a few drawbacks, however, including the fact that this strategy is not appropriate for every case. It is likely that if you purchased a computer that came pre-installed with Windows 10, doing so would bring back the bloatware that was pre-installed on your Windows 10 PC.

  1. In order to reset your Windows 10 computer, open the Settings app, choose Updatesecurity, select Recovery, and then click on the “Get started” option under Reset this PC to begin the process.
  2. This will completely wipe your hard drive, so make sure you have backups.
  3. If you make a modification to the PC’s hardware after taking advantage of the offer, you may need to contact Microsoft and finish the phone activation procedure, explaining what occurred.
  4. Even if Windows 10 does not activate automatically, the phone support line can provide you with an activation code that will allow you to activate the operating system.
  5. Technically, the free Windows 10 upgrade (as well as OEM copies of Windows and pre-installed versions of Windows 10) aren’t allowed to be transferred to a different computer, according to Microsoft.
  6. Photograph courtesy of Brett Morrison on Flickr
You might be interested:  How To Clone A Hard Drive Windows 10

How to perform a clean install of Windows 10

Having the ability to conduct a clean installation of Windows 10 is a valuable skill to have. It’s a must-have if you’re intending to construct your own computer from the ground up. If you’re having troubles with your system and have exhausted all other options, it’s the final resort. It’s also the only way to get rid of any pre-installed bloatware that came with the machine from the manufacturer. Going into the settings and pressing the reset button on Windows 10 is not the same as performing a clean install of the operating system.

When you perform a clean install, Microsoft provides you with a factory-fresh image.

If, on the other hand, it is exactly what the circumstance requires, then please allow us to assist you.

It is necessary to have access to a Windows 10 PC in order to produce the image from which you will be installing from the beginning. Aside from that, you’ll need an 8GB or bigger USB flash drive as well as some spare time to complete the project.

(Photo courtesy of TechRadar.)

Before you begin

It is necessary to first check that you have a valid Windows 10 license before proceeding with the clean installation of Windows 10. If you already have Windows 10 installed on your computer, you can verify this by navigating to the ‘Settings’ program in the Start menu. From the sidebar, choose ‘UpdateSecurity’ and then ‘Activation’ to proceed. You’ll now see a notification stating that Windows 10 has been activated, either with a digital license or with a digital license that is tied to your Microsoft Account, depending on your configuration.

You will need to input the activation key throughout the installation process.

In addition, you should take the time to back up any vital files and data because this operation will totally wipe your computer.

How to perform a clean install of Windows 10

To complete the procedure, there are two steps. For the first step, you’ll need to get the most recent Windows 10 image from Microsoft and use it to create a bootable flash drive. That image is then used to install Windows 10 on your computer in the second stage. Because the Windows 10 image is fairly large, the precise length of time it will take you to finish this procedure will be determined in part by your internet connection speed. Installing software will also be significantly faster on faster SSDs as compared to older HDDs.

This will not only assist you in downloading the most recent Windows 10 image, but it will also enable you to create a bootable USB drive from which you may install the operating system.

Not only that, but it may be operated as a stand-alone program without the need to install anything.

2. Create a bootable flash drive

Open the Media Creation Tool on your computer’s desktop. Select the option to ‘Create installation media for a different PC’ and agree to the terms and conditions of the license. The following step is to select a language, edition, and architecture for Windows 10 to be installed. For the most part, x64 architecture will suffice, and the edition will need to correspond to whatever you have a license for in order to function properly. All that’s required is that you choose both or x86 if you know you’ll be using it on a 32-bit computer.

Then select your flash drive from the list. To complete the procedure, click on ‘Finish’ once again and the program will begin the download of Windows 10 and creation of the USB installation drive. (Photo courtesy of TechRadar.)

3. Boot the Windows 10 installer from the USB flash drive

Once the Media Creation Tool has completed its work, you’ll need to connect it to the computer on which you’d want to do a fresh installation of Windows 10. First and foremost, in order for the installation to execute, you must instruct your computer to boot from the USB device rather than the internal SSD or hard disk. The BIOS is the most convenient place to accomplish this. If you’re putting together a new computer, this is also the only method to go about it. When you initially switch on your computer, you’ll be prompted to hit a key to access the BIOS, which may also be referred to as ‘Setup.’ It will vary from computer to computer, but it is likely to be anything like ‘F2’, ‘F12’, or ‘Delete.” Once you’re in the BIOS, navigate to the ‘Boot’ tab and make sure the USB drive you just created is listed first in the list of priority devices.

If you want to restore to your usual boot priority once Windows 10 has been installed, you may easily erase this setting.

4. Install Windows 10

The remainder of the process is rather basic. Your PC will be taken through the whole installation procedure after it has booted into the Windows 10 installer once it has been configured. Essentially, you’ll select the location where Windows 10 will be installed, and the application will take care of the rest. In the event that you need to input an activation key during the installation process, you’ll be given the option to do so throughout the procedure, but you may also do it later using the ‘Settings’ app.

As soon as the installation is complete and your computer restarts, either remove the USB flash drive from which you were installing Windows 10 or enter the BIOS settings to instruct your computer to boot from your specified Windows 10 disc.

5. Complete the Windows 10 setup process

It is necessary to complete the regular Windows 10 setup, which includes entering your network information, Microsoft Account credentials, and a variety of other options as needed. The final step might include Windows 10 obtaining and installing the most recent updates, which could take some time. Once all of this is completed, you will be presented with a brand new, factory-fresh Windows 10 desktop.

Summary

The process of performing a clean installation of Windows 10 is not difficult, but it does take some time. Nonetheless, it is a vital component of PC construction, the most effective method of upgrading your current internal drives, and, in some cases, a simple solution for sluggish, bloated PCs. Fortunately, all you need is a USB flash drive and the following simple procedures to get back up and running again.

How to do a clean install of Windows 10: Which option is best for you?

A clean install is regarded as a time-honored procedure among Windows professionals, serving as a method of removing accumulated cruft and bringing an outdated PC back to life.

Must-see offer

Install Windows 10 on your computer. Do you want Windows 10 Home or Windows 10 Pro? Which one do you want? Are you unsure? Microsoft has further information on the various Windows 10 editions. More information can be found at Clean installations have a plethora of absolutely valid reasons to be performed.

Possibly, you are repurposing an outdated but still functional computer for usage by another member of your family or by a member of your organization.

Alternatively, you may simply desire a fresh start.

  • Installing and managing security and feature updates in Windows 10 is covered in detail in this article.

A clean install is the ultimate troubleshooting procedure since it is practically certain to eradicate performance or compatibility issues caused by third-party software, temporary files, configuration mistakes, and common viruses. A clean install may be performed on any operating system. The end result is a PC that starts from a known-good condition, with either the default Windows 10 setup or a previously tested configuration that contains particular third-party applications and drivers, depending on the configuration.

Here are the advantages and disadvantages of each strategy, as well as some suggestions on when to use each one.

Use a recovery image from the OEM

For those who acquired a PC with Windows 10 already installed, you may be able to restore the computer to its factory default state by selecting Restore from Factory Image. Because the stored image has all necessary drivers, tools, and hardware support to ensure that all of your devices function as intended as soon as you sign in for the first time, this is a welcome development. It’s a shame, because the saved image also contains whatever crappy software the manufacturer was paid to preinstall alongside your otherwise flawless Windows 10 installation.

Aside from the aforementioned crapware, the most significant disadvantage of this option is that you’re more than likely to end up with an out-of-date Windows installation, necessitating the installation of a time-consuming full feature update, followed by the most recent cumulative update, after your recovery has been completed.

When you start your PC in recovery mode, you may be presented with the choice to restore an OEM image from a dedicated partition, or your OEM may have included a tool that downloads the most recent image from their servers on your behalf.

In addition to recovery images for Dell, HP, Lenovo, and Microsoft Surface devices, see “How to acquire a free Windows (or Linux) recovery image for your OEM PC” for information on where to obtain recovery images for other OEM PCs.

Restore from a backup image

Because of the nature of this option, it is only available to those who are well-prepared and who utilized the classic Windows Backup software (Sdclt.exe) or an alternative third-party backup tool immediately after setting up their PC when it was first purchased. If you are one of the fortunate few, you are most likely reading this article from your luxuriously outfitted fallout bunker, which has a 12-month supply of canned food, pharmaceuticals, and bottled water neatly stocked on the shelves.

For those who use a big collection of third-party applications, such as custom device drivers, that are not available through Windows Update, this is a very enticing choice.

The drawbacks of this strategy include the additional time and work necessary to generate the backup, as well as the organizational skills required to maintain that backup safe and easily available when it is needed when it is needed.

It is possible, however, that the image depicts a Windows 10 version that you wish to use while skipping one or two succeeding feature upgrades will be considered a positive.

Use the Windows 10 Reset This PC option

When you use this function, which has been greatly modified since its introduction in Windows 8, it creates an entirely new copy of your current Windows version, removing any third-party drivers or applications that may be creating issues. You will not require any installation disks or product keys, and you will not be required to make any changes to your firmware settings in order to boot from an other device. You will not be able to reset your computer by accident. Generally speaking, the procedure consists of at least four phases that need you to make decisions, with one last affirmation that spells out in crystal plain words exactly what is about to take place.

To begin, go to SettingsUpdateSecurityRecovery and select the appropriate option.

Choose Keep My Files (which is the best option if you want to reuse the computer yourself) or Remove Everything (which is the best option if you’re selling the computer or handing it on to someone else) from the first set of options.

(If you’re resetting the PC for personal use, you may skip this step.) Beginning with Windows 10 version 2004, the Reset This PC option allows you to choose whether you want to reinstall Windows using the already installed copy or if you want to obtain a new copy of the operating system from the internet.

(Please keep in mind that this is an estimate.) If you want to start again in the shortest amount of time with the least amount of effort, the reset method is the ideal choice.

Note that if your system has been infiltrated by malware or if any system files have been destroyed or corrupted, a reset may not be effective.

Reinstall from bootable Windows 10 recovery media

This option provides you with the most amount of control over the clean installation procedure. It also necessitates higher-than-average technical abilities and, in most cases, some post-installation fiddling to verify that all hardware functions correctly and that the appropriate functionalities are available. There are three steps in the process:

  • To begin, download the most recent installation files from theDownload Windows 10page and use the Media Creation Tool to build a bootable USB flash drive using the newest installation files. (See my FAQ, “Windows 10 updates: How to install, reinstall, upgrade, and activate,” for more information.)
  • Finding the correct combination of keystrokes and/or incantations to boot directly from that drive into the Windows Setup application is then the next step to do. If required, you may use the built-in tools to reformat and/or repartition the destination hard disk. Your previous files will remain on your computer’s hard disk in a folder called Windows.old if you miss the formatting stage. Install Windows 10 at the end of the process. It is possible to skip beyond the portion where you are prompted to provide a product key if you are using hardware that has already been activated
  • Windows will activate automatically once you log in for the first time.

You’ll need to use Windows Update to install the latest updates, which may contain hardware drivers for devices that aren’t included in a typical Windows installation. It is necessary to wipe away the Windows.old folder and then complete the remaining setup steps if you did not format the system disk prior to installing the operating system on it.

You might be interested:  How To Get Rid Of Windows 10

How to Backup Windows 10 for Fresh Install

If your computer is experiencing issues such as sluggish performance, system crashes, apps stopping randomly, or other issues, a new installation of Windows may be the most effective solution. It can be difficult to determine the root cause of your system difficulties, but reinstalling Windows will almost always resolve these deep-seated issues with relative ease. If you are upgrading from Windows 7 or Windows 8.1 to Windows 10, you may encounter certain system difficulties during the process.

In such scenario, you can do a clean installation to resolve all of the issues.

How to keep the data stored on C: drive when reinstalling

A new Windows 10 installation will, in most cases, result in the deletion of all data and applications stored on the C: disk. While getting rid of system faults is a good thing, having to reinstall all of your previously installed and working apps may be time-consuming. Fortunately, there are two methods for retaining data on the C: drive even after performing a clean installation. If your C: disk is large enough (with at least 16GB of free space), you may be able to reinstall Windows 10 on it without having to reformat it.

Following the fresh install, you will be able to remove all of your data from that folder.

Backup your Computer before clean install

If you merely want to wipe the system disk and reinstall Windows 10, you may create a system backup to prevent data loss before proceeding. If you wish to clear up your entire hard drive and start again, you can create a backup of your hard drive. If you want the ability to recover data from an image backup in a flexible manner, you may make use of the free backup and restoration softwareAOMEI Backupper. It enables you to backup the operating system, files, partitions, and drives, as well as to retrieve certain data without having to restore the whole image backup.

This will allow you to restore your system to a previously normal condition.

Step 1: Download and install this freeware program, then run it.

If you wish to back up the entire system drive, just selectDisk Backup from the Backup menu.

Step 3. A backup of Windows 10 to an external hard drive or network-attached storage (NAS) is suggested because a new install will wipe everything on the C: disk if you don’t do so first. Start the backup by clicking the Start Backup button on the Operation Summary screen in Step 4.

How to fresh install Windows 10

If you want to reinstall Windows 10 from the beginning, you should prepare an installation disc or USB drive for Windows 10. If you do not already have one, you may create one by downloading theWindows 10 media creation tool from Microsoft. Afterwards, follow the instructions outlined below: Step 1: Insert the Windows 10 installation disk into the computer’s optical drive. Delete or F2 are normally the keys to use to boot into BIOS and change the boot order so that your machine will boot from the installation disk.

  1. Step 3: Once the page has loaded, pick your language and other preferences before clicking Install Now.
  2. When prompted to input your product key, just select the Skip option.
  3. Step 5: Select the Windows 10 installation type from the drop-down menu: To ensure a clean installation, it is necessary to make modifications.
  4. Then choose the unallocated space and press the New button to create a new system reserved partition and C: drive on your computer.
  5. Step 7.
  6. ♥ Instructions on how to build a factory image backup are as follows: You never know when your computer may stop working and whether it will be possible to recover it; thus, it is recommended to build a factory recovery partition after reinstallation, as this is the optimum time to do it.
  7. It allows you to produce a system image backup as well as bootable discs at the same time, and it will install a boot menu for this program on your computer when you use it.

Restore some of the files from system image backup

You should now have your brand new Windows 10 operating system installed. Because we have backed up Windows 10 in preparation for a fresh installation, you can recover any files that you would wish to preserve. To restore the data, you may either reinstall AMEI Backupper or boot from the AOMEI Backupper bootable disc. Instead of selecting Restore from the Tools menu in AOMEI Backupper, choose Explore Image. It is pointless to do a fresh install if you are going to restore the whole system image.

When the procedure is finished, you will be able to examine all of the files in Windows File Explorer.

To avoid any potential issues, you should save them with the original location path as the file name.

As you can see, AOMEI Backupper is a reliable tool for storing and protecting your digital data. Furthermore, AOMEI Backupper Standard may help you clone your hard drive to an SSD, copy partitions, sync files or folders across other computers, and so on.

How to Perform a Clean Install of Windows 10

We previously shown how to obtain a Windows 10 ISO for use in a clean installation. Today, we’ll demonstrate how to perform a complete clean installation of Windows 10 from scratch. We previously shown how to obtain a Windows 10 ISO for use in a clean installation. Today, we’ll go through the steps involved in performing a complete clean install of Windows 10 from the ground up in detail. Take a look at our post on how to cleanly install Windows 11 for more information.

Step 1. Configuring your computer’s BIOS*

If your computer is appropriately configured and instantly boots from a USB or DVD drive, you may not need to do anything further. When you restart your computer, you will see a page that says “Press any key to boot from USB/DVD.” You can select any key on your keyboard to proceed to the next stage. Starting with the Windows 10 installation media, which can be a DVD or USB flash drive, connect the computer to the internet. If you haven’t already, check out our post on how to make a Windows 10 USB flash drive for more information.

  1. For those of you who are using a laptop and are unaware of what your BIOS key is, a simple Google search like this should be able to assist you.
  2. It’s rather uncommon for the controls of each BIOS to be shown at the bottom of the screen (unless you’re lucky enough to have a GUI BIOS, in which case you’ll be able to browse using the mouse).
  3. Because I’ll be utilizing a DVD, I’ll put “CD-ROM Drive” at the top of the list.
  4. When you’re through with the boot order modification, use the right arrow key to get to the Exit section of the BIOS.
  5. Following this, your machine should be able to restart and boot directly into the Windows installation disc.
  6. Otherwise, you will not be able to access the installation.

Step 2. Installing Windows 10

Following the reboot, you should be presented with the Language selection screen. Select your preferred language, time and currency format, as well as keyboard input, from this menu. Then click on the Next button to proceed. On the following screen, select “Install now” from the drop-down menu. Before you may proceed, you must first agree to the Microsoft End User License Agreement (EULA). Before selecting “Next,” take a moment to read it (or not) and check the checkbox. A clean installation will need you to choose the “Custom: Install Windows exclusively” option throughout the installation process.

  • If you have many hard drives or partitions, the following step may be a little more challenging.
  • It is preferable to completely remove these files rather than simply reformat them in order to ensure a completely clean installation.
  • To create a new partition, select it and then click the “New” button on the toolbar.
  • I would recommend that you keep the size as is and click “Apply.” Note: You will most likely be warned that Windows may create new system partitions during the installation process.
  • The Windows installation process should now begin.
  • to this in a couple of minutes.

Warning: If the “Press any key to boot from USB/DVD.” box occurs when restarting your computer, you should stop. PLEASE DO NOT PRESS ANY BUTTON! Pressing one will result in the installation being re-started from the beginning.

Step 3. Configuring Windows

Following the reboot, you should be welcomed by the screen shown below. Because the default Windows 10 settings are superb and do not significantly interfere with your privacy, we recommend that you use the Express settings. The option to customize the settings is available if you are insistent on turning off certain functions. Windows will now go through a number of configuration operations. Remember that frequent reboots are common at this point; simply leave the computer alone until you reach the “Create an account” page.

Windows will now proceed to complete the final configuration steps.and will then boot directly to the Desktop.

What now?

When it comes to Windows 10, there’s a lot to see and do – from changing standard settings to exploring the many new and interesting features. Here are a couple of things you may read right away to get started:

  • Windows 10 Tip: From the Start Menu, search for apps by their first letter. Tip for Windows 10: You may add or remove system icons from your desktop. Tip for Windows 10: Add specific settings to the Start Menu. Tip for Windows 10: Pin websites from the Edge browser to the Start menu. Tip for Windows 10: Add your favorite music playlists to the Start Menu. Creating a System Restore Point in Windows 10 is simple and straightforward. What is the best way to create Live Tile Groups in the Windows 10 Start Menu? Gmail and other email accounts may be added to the Windows 10 MailCalendar. Increase the frequency at which the Windows 10 Mail App syncs
  • Tip for Windows 10: Configure the Edge browser to open many web pages at the same time. How to Make Windows 10’s Default Apps Your Favorites
  • How to Enable Hibernate Mode in Windows 10
  • How to Enable Hibernate Mode in Windows 7. The steps to create a Windows 10 USB recovery drive are as follows: It is possible to transfer iTunes playlists to the Windows 10 Music App
  • Rather of Quick Access, Windows 10 File Explorer should be opened on this computer. Increase the number of folder locations available on the Windows 10 Start Menu.

How to reinstall your Windows 11 or Windows 10, format the drive and reset everything – without losing your programs and files

Learn how to reinstall Windows on your computer, as well as how to do a complete system clean and refresh – while keeping your programs, profile, settings, documents, images, audio files, movies, favorites, wallpaper, and anything else you have saved on your computer. In many situations, a Windows wipe and reinstall is a beneficial approach. It might be caused by a malware infection, a failure to install Windows Updates, or simply by Windows 11 / Windows 10 being too sluggish or troublesome to operate.

Historically, this has been a time-consuming operation, and the recovery has only been partial, restoring only the files and leaving all other applications, settings, customisation, profiles, and passwords behind.

How to Backup your Windows PC

The first step in a reinstall of this nature is to make a complete backup of everything you have. After you have reset the system, all of your apps and data will be lost, and you will need to restore them in order to bring things back to normal. Our tool of choice for this is Migration Kit Pro, which allows you to simply backup and, more crucially, effortlessly restore applications, settings and data following a reinstallation of Windows (even if you are migrating to a newer version of the operating system).

How to backup your Windows so that you can restore programs, settings and files after the reinstall

Before we begin, it is critical that you have a complete and accurate backup of your computer. This step is critical because if you don’t do it, you will lose all of your apps and data if you wipe the system clean.

  1. ZinstallMigration Kit Pro to be downloaded and installed on your PC.
  1. Make use of the third option on the menu, “Moving from Machine to Container.” Make a pick for the C: drive on the Source option, and in the Target explore selection, make a selection for a location to put your backup container (which is basically a large file). Ideally, a USB external hard drive should be used, but any location outside of the computer we are wiping will do, such as a network drive, another hard drive within the computer, or any other location that is accessible from the computer would suffice. Start the backup procedure by pressing the “Start” button. Hopefully, this will take a long time, and you will receive an email verifying that the container has been successfully formed.

Your belongings are now secure, and we may begin the process of resetting Windows on this machine.

How to Reinstall Windows

Following the creation of your backup, it’s time to carry out the real Windows clean and installation.

There are a variety of approaches you may take: Option 1: If you are using Windows 11 or Windows 10, resetting your computer is a simple process that does not require you to delete your hard drive. Here’s how it’s done:

  1. Open the Start Menu and select “Settings” (located in the top-left corner)
  2. Select the UpdateSecurity option from the menu bar. Select the Recovery tab from the drop-down menu. Look for the option “Reset this PC” and click on Get Started. The Reset wizard will be launched as a result of this action. Choose the option to remove everything from the list. Follow the on-screen steps until the wizard begins erasing the computer’s hard drive.
You might be interested:  How To Move Files From Ssd To Hdd Windows 10

Proceed to the “Restore your applications, settings, and data from backup” section once you have completed the previous step. The PC Manufacturer’s Factory Reset option may be useful if you are not running Windows 11 or Windows 10, or if the built-in Reset procedure does not function for whatever reason. Each PC vendor offers a somewhat different set of instructions on how to accomplish this. A typical procedure is rebooting the computer, followed by a key press on one of the function keys (F2,F8,F9, F10, F11, or F12) to enter the manufacturer’s factory reset menu.

Proceed to the “Restore your applications, settings, and data from backup” section once you have completed the previous step.

Here’s how you can go about it:

  1. First, we’ll construct a USB installation disc for either Windows 11 or Windows 10. Here’s how it’s done: Download and install Microsoft’s Windows 11 or Windows 10 Media Creation Tool on any operating computer (you may do this on the PC you will be erasing later). The utility may be found at the following link: After you have downloaded it, insert a blank USB stick into your computer. Tell the tool to create an installation media on that USB stick (DO NOT press “Upgrade Now” because that will upgrade the computer you are currently working on)
  2. Then tell the tool to create an installation media on that USB stick (DO NOT press “Upgrade Now” because that will upgrade the computer you are currently working on). Upon completion of the tool, take the USB stick and insert it into the machine that we will be wiping and reinstalling software on
  3. Installing Windows 11 or Windows 10 requires that we reboot the machine that we are reinstalling so that it can boot from the USB stick and begin the installation process. Custom installation should be selected throughout the installation process, and then the wizard should be used to wipe away any existing copies of Windows and reinstall a whole new, fresh copy of Windows

Proceed to the “Restore your applications, settings, and data from backup” section once you have completed the previous step.

How to Restore your programs and files from backup

  1. As soon as you have a fresh new Windows installation, you should begin the process of restoring your applications, settings, and data from the previous backup you created. Using ZinstallMigration Kit Pro, select the 4th option, “Moving from Container to Machine,” and follow the instructions.
  1. If you point it to the backup container you made in the first step, it will restore everything, including applications, settings, and files, to the new Windows
  2. Otherwise, it will not restore anything. For those who don’t want to restore everything, you may choose to exclude certain applications or directories from the restoration process.

Everything has been successfully reset, and all of your applications and files have been returned to their original locations on your computer.

Ready to go?

Interested in creating a backup of your Windows and then wiping it clean to retrieve your apps and files? Here’s where you can get Zinstall Migration Kit Pro. Do you have any questions? Do you require assistance? Are you in need of assistance with a Windows installation, backup, or recovery? Our expect technicians are ready and waiting for you! Contact us by email ([email protected]), phone (877.444.1588), or live chat to discuss your needs (bottom-right corner of this page). We are looking forward to being of service to you.

8 Important Things to Do After Installing Windows 10

Windows 10 is a straightforward operating system to learn how to use, but there are a few steps you should do after installing Windows to ensure that you have the best possible experience. While completing these tasks will take some time, it will prepare you for a more enjoyable experience in the future. Consider the following items to do as soon as Windows 10 is installed on your computer. When installing Windows for the first time, they are the most crucial to look for, but they are also worth checking after installing a big feature update or after reinstalling a fresh copy of the operating system.

1. Run Windows Update and Configure Update Settings

Even if you have just recently upgraded to Windows 10, there is a good probability that you will need to download and install some recent updates. You should install them as soon as possible to ensure that you have the most up-to-date features and security updates. Whether you want to see if there are any Windows updates available, open the Settingsapp (by pressing Win + I or clicking on the symbol in the Start menu) and navigate to UpdateSecurityWindows Update. On this screen, click the Check for updates button and allow it some time to complete.

Whenever there are any that require a restart, you’ll be given the option to do so.

Windows Update is triggered automatically in Windows 10 by default.

How to control Windows Update in order to ensure that it runs properly in the background. This is something you should perform as soon as possible after installing Windows 10 since you don’t want a badly scheduled update to interfere with your work.

2. Make Sure Windows Is Activated

In contrast to previous versions of Windows, Microsoft makes it simple to install Windows 10 on your computer even if you do not have a valid license. This step is necessary if you did not submit a license key or sign into a Microsoft account that has a digital license during the installation process. You will be able to utilize all of the features of Windows 10 as a result. Check if you’ve activated Windows by going toSettingsUpdateSecurityActivation in the Settings menu. Assuming you have, you’re good to go.

For more information, please see our article on how to remove the “Activate Windows 10” watermark.

3. Update Your Hardware Drivers

The term “device driver” refers to software that communicates with and controls the operation of a certain device when it is attached to your computer. In other words, drivers allow Windows to connect with your computer’s hardware in an appropriate manner. In most cases, drivers are given by the hardware manufacturers and, like other software, they are not always error-free. They can be unstable at times, or they may not have received any upgrades to ensure that they are compatible with the most recent versions of Windows.

However, when you are first setting up Windows, installing the correct drivers is a critical part in the process.

Instructions on how to locate and replace outdated drivers may be found at how to identify and update outdated drivers.

4. Install Essential Windows Software

Windows 10 comes pre-installed with a number of basic programs that may be used for a variety of tasks, but many of the finest Windows applications are not included. We’ve put up a comprehensive guide to the Windows applications that everyone should download and install right immediately. View our recommendations in areas like as browsers, security, picture editing, messaging and more by clicking on the link above. Whether you’ve just begun using Windows 10 or have completely reinstalled it, having the correct tools at your disposal will make your experience significantly better.

5. Change Default Windows Settings

The default settings in Windows 10 aren’t perfect for everyone, and they shouldn’t be.

They’re usable, but you’ll most likely have a better experience if you change them a little bit. With so much to modify in the Windows 10 Settings program, let’s concentrate on a few critical modifications that are highly suggested following a Windows 10 installation.

Adjust Default Windows Apps

After you’ve installed your preferred applications, you should make them the default applications on your computer. Follow these steps to modify the applications that Windows 10 uses for a variety of functions:

  1. Navigate toSettingsAppsDefault applications
  2. Choose your favorite programs from each category, which may include email, music player, web browser, and other applications. Choose default applications based on file type in the section below that. if you’d want to associate different file formats, such as PDF, DOCX, and TXT, with certain apps, you may do so with a file association tool. If you prefer a different view, select Set defaults by app and then select a specific app to see which settings it currently has and which ones it may use.

For more information on how to accomplish this, see our guide on establishing defaults in Windows 10.

Disable Unnecessary Startup Items

Many applications configure themselves to run automatically at startup, which wastes resources and causes your computer to take significantly longer to load up. After you’ve installed software, you should check to see that only permitted applications are launched when the computer starts. Disable unused startup items in Windows 10 by following these steps:

  1. To access the Task Manager, press Ctrl + Shift + Esc, or right-click on the taskbar and selectTask Manager from the context menu. If necessary, selectMore information to switch to the full-screen mode. Navigate to the Startup tab. Make a right-click selection on any application that you do not wish to start automatically and selectDisable to prevent it from starting at startup.

Optimize Power Plan Settings

The power settings in Windows 10 allow you to customize a variety of components of the operating system that influence power consumption. This is crucial for laptop users since it helps them conserve battery life, but it also offers valuable performance-related options that are applicable to desktop users as well. You may make changes to your power plan by following these steps:

  1. Navigate to SystemPowersleep in the Settings menu. Additional power options may be found on the right side of the screen, and this will open the Power Options area of the Control Panel. If you don’t see this link on the right, try increasing the horizontal size of the Settings window
  2. It should display eventually. The options available to you will be Balanced, Power Saver, and High performance. You can pick from any of these plans. Choose the plan you want, then clickChange plan settingsto the right of the screen to make changes. Make a selection for the period of time that should elapse before the screen goes dark and the computer goes to sleep. Then selectChange advanced power settings to see a list of other choices. Even if you may go over anything here, you should pay close attention to the settings under the Hard disk and Sleep, Power buttons and lid, Processor power management, and Displaycategories
  3. Otherwise, you will be disappointed. To save your changes, click the OK button.

For further information, see How to Use Windows Power Plans to Save Battery Life on Your Laptop.

Tweak Privacy Settings

Windows 10 collects a plethora of information about your computer’s operation and how it is used. This helps Microsoft enhance the constantly developing product, but it is seen negatively by many as an infringement of their privacy. Fortunately, you have the option of reducing or disabling many of the telemetry services. For all you need to know about Windows 10 privacy settings, see our comprehensive guide.

Enable Night Light

When you turn on your computer’s display at night, a built-in function makes the screen display warmer. This helps to lower the amount of blue light that keeps you awake and makes your computer less harsh on your eyes when working late at the computer. This may be enabled by going toSettingsSystemDisplay and selecting it. Enable theNight lightslider and then clickNight light settingsto customize the way the lights function at night. You may choose the strength of the effect and set it to run automatically from sunset to sunrise or during specific hours of your choosing, or you can manually control the effect.

6. Set Up a Backup Plan

The last thing you’d want is to go through all of these Windows setup processes only to have your machine completely destroyed by a virus infestation or a dead hard disk. It is critical to back up your data in order to keep it safe from these and other threats. In this article, we will show you how to back up and restore data to the cloud in Windows 10 in a straightforward manner. We’ve also covered which files you should back up and which ones you should leave alone.

7. Configure Microsoft Defender

Microsoft Defender, the built-in antivirus software included with Windows 10, is adequate for the majority of users. Following the installation of Windows 10, your computer will be protected against a wide range of threats.

The best course of action is to examine how it operates and make modifications to boost your computer’s resilience to attacks. Improve your security with Microsoft Defender by learning how to get the most out of this powerful protection program!

8. Personalize Windows 10

Despite the fact that it is not as critical as the preceding procedures, you should nevertheless spend some time customizing your desktop after installing Windows 10. It’s surprising what a new wallpaper, a distinctive mouse cursor, and other tiny personalization modifications can do to make your computer seem more like a home away from home. You have a plethora of alternatives in this regard. We’ve demonstrated how to make some easy adjustments to the appearance and feel of Windows 10 in the video below.

After Installing Windows 10, You’re All Set

You no longer have to be perplexed as to what to do next after installing Windows 10. We’ve taken a look at the most important things to perform after a fresh Windows 10 installation to ensure that your machine is ready for daily usage. While you may still need to make a few minor adjustments here and there, the most of the work is done during the first setup. Meanwhile, to ensure that your computer continues to work well in the future, make sure you understand how to maintain your system clean.

Here’s a simple, step-by-step approach to returning your Windows PC back to its former, clean state.

In 2016, he quit his IT career to pursue writing full-time, and he hasn’t looked back since.

More Adapted from Ben Stegner

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

Leave a Comment

Your email address will not be published. Required fields are marked *