How To Get Out Of Safe Mode Windows 10

Contents

3 Ways to Exit Safe Mode in Windows 10

How to»How to»How to Exiting Safe Mode in Windows 10 may be accomplished in three ways. When you start Windows 10 in Safe Mode, you have the ability to identify and solve computer problems. Exiting Safe Mode in Windows 10 may be accomplished in one of three ways, which are detailed below. In most cases, you should be able to exit Safe Mode by simply restarting your computer once you have finished troubleshooting problems on your computer while in Safe Mode. If, however, this does not occur, you will need to manually exit Safe Mode by using the Command Prompt or the Shift Key Restart technique.

1. Exit Safe Mode Using System Configuration

If your computer is continuously booting into Safe Mode, you will need to utilize the System Configuration screen to exit Safe Mode, which can be found on the Start menu. 1.Right-click on the Start button and select Run from the context menu. Note: You may also access the Run Command Window by pressing the Win + R keys simultaneously. 2.In the Run Command Window, run the command msconfig and press the Enter key. Choose the Boot tab from the System Configuration screen, uncheck the Safe Boot option, and then click OK.

When the computer is restarted, it will exit Safe Mode and return to normal operation.

2. Exit Safe Mode Using Command Prompt

Exiting Safe Mode using Command Prompt may be accomplished by following the procedures outlined below. 1.Right-click on the Start button and select Command Prompt from the context menu (Admin). Enter the command bcdedit /deletevaluesafeboot into the Command prompt box on your computer’s keyboard and hit Enter. 3.Restart your computer, and it will be brought out of Safe Mode automatically.

3. Restart With Shift Key

An alternative method of exiting Safe Mode is to restart your computer while pressing and holding the Shift Key simultaneously. 1.Start your computer by pressing and holding down the Shift Key (on your keyboard). 2.On the following page, select the Troubleshoot option. 3.After that, select Advanced options. To access the Startup Settings, click onRestart. The computer will restart with a variety of starting choices; hit the Enter key to exit Safe Mode. 5.

  • When using Windows 10’s Safe Mode, you may enable it by using the F8 key. What is the procedure for creating a Windows 10 password reset disk?

How to Exit Safe Mode on Windows 10

Windows 10 in safe mode is recommended if you are having problems starting the operating system normally and need to perform some troubleshooting. When you’re through using safe mode and wish to resume normal operation of your computer, follow these steps.

What Is Safe Mode?

It is simply a debugging mode for your computer. In the event that you’re running insecure device drivers that are causing you to see the blue screen of death or if your computer has been infected with malware, booting up Windows 10 in safe mode allows you to identify and resolve the source of the problem. In certain circumstances, it may be the only method to get your computer to boot up without having to reinstall Windows. Why? Because when you start Windows 10 in safe mode, startup applications and other services that are configured to start on startup aren’t started, hardware support is minimized, screen resolution is reduced, and no third-party software or drivers are enabled, this is the recommended method.

In safe mode, you may restore drivers to their previous versions, examine system logs, and uninstall applications that may be creating problems. IN CONNECTION WITH:How to Perform a Clean Boot in Windows

How to Exit Safe Mode on Windows 10

Restarting your Windows computer will allow you to exit safe mode without any additional steps. This may be accomplished by selecting “Start” from the “Start” menu in the bottom-left corner of the screen, then “Power” and finally “Restart.” Restarting your computer may be accomplished in a variety of ways, including by typing shutdown /r from the Command Prompt. Regardless of the option you use, you’ll be requested to restart your computer and start Windows 10 as normal. You may also restart normally without having to go through the prompts.

Once the window is open, type “msconfig” in the text box next to “Open” and click “OK.” Once the window is closed, click “OK.” In the pop-up box that displays, select the “Boot” tab.

When you restart your computer, you will no longer be interrupted by the prompt.

Start your PC in safe mode in Windows

Safe mode begins Windows in a minimal form, with just a small number of files and drivers loaded. If a problem does not occur in safe mode, this indicates that the issue is not being caused by the system’s default settings or basic device drivers. It is possible to troubleshoot problems on your computer while Windows is running in safe mode, and this might help you narrow down the cause of the problem. Safe Mode is available in two flavors: Safe Mode without Networking and Safe Mode with Networking.

Please choose one of the following sections to learn how to start your computer in safe mode from the Settings menu, the sign-in screen, a black or blank screen, or any other screen.

  1. To enter the Settings menu, press the Windows logo key plus I on your keyboard. If it doesn’t work, press the Start button, then click Settings
  2. Then select SystemRecovery from the drop-down menu. Open the Recovery Configurations
  3. Select Restart now from the Recovery options menu, which is located next to Advanced startup. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  4. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in Safe Mode by selecting4or pressingF4. Alternatively, if you will be need internet access, select5or pressF5for Safe Mode with Networking

You can restart your device from the Windows sign-in screen if you are unable to access Settings in order to enter safe mode.

  1. When you get to the Windows sign-in screen, hold down the Shift key while selecting the PowerRestart option. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  2. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in safe mode by selecting4orF4. Alternatively, if you may need to connect to the internet, choose5orF5for Safe Mode with Networking.

Remember that if you’ve encrypted your device, you’ll need your BitLocker key in order to boot into safe mode. You must first access the Windows Recovery Environment (WRE) before you can boot into safe mode (winRE). To accomplish this, you will need to continuously switch your device off and then back on:

  1. If you want to switch off your device, press and hold the power button for 10 seconds. To turn on your smartphone, press the power button a second time. Hold down the power button for 10 seconds when you see the first indication that Windows has begun (for example, some devices display the manufacturer’s logo when resuming) to switch off your device. To turn on your smartphone, press the power button a second time. Keep holding down the power button for 10 seconds after Windows has restarted in order to switch off your device. To turn on your smartphone, press the power button a second time. To enter winRE, allow your device to restart into Automatic Repair mode and then choose Advanced options from the menu bar.

The following steps will guide you through the process of entering safe mode while you are in winRE:

  1. Advanced options may be found on the Choose an option screen by selecting TroubleshootAdvanced options. Preferences for the first time After your device has restarted, you’ll be presented with a menu of alternatives. Safe Mode with Networking may be accessed by selecting option5 from the list or by pressing F5.

To learn more about troubleshooting a black or blank screen issue, read Troubleshooting black or blank screen errors (PDF).

  1. To enter the Settings menu, press the Windows logo key plus I on your keyboard. If it doesn’t work, try selecting the Start button, then selecting Settings
  2. Then selecting UpdateSecurityRecovery from the drop-down menu. Open the Recovery Configurations
  3. Select Restart now from the Advanced startup drop-down menu. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  4. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in Safe Mode by selecting4or pressingF4. Alternatively, if you will be need internet access, select5or pressF5for Safe Mode with Networking

You can restart your device from the Windows sign-in screen if you are unable to access Settings in order to enter safe mode.

  1. When you get to the Windows sign-in screen, hold down the Shift key while selecting the PowerRestart option. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  2. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in safe mode by selecting4orF4. Alternatively, if you may need to connect to the internet, choose5orF5for Safe Mode with Networking.

Remember that if you’ve encrypted your device, you’ll need your BitLocker key in order to boot into safe mode. You must first access the Windows Recovery Environment (WRE) before you can boot into safe mode (winRE). To accomplish this, you will need to continuously switch your device off and then back on:

  1. If you want to switch off your device, press and hold the power button for 10 seconds. To turn on your smartphone, press the power button a second time. Hold down the power button for 10 seconds when you see the first indication that Windows has begun (for example, some devices display the manufacturer’s logo when resuming) to switch off your device. To turn on your smartphone, press the power button a second time. Keep holding down the power button for 10 seconds after Windows has restarted in order to switch off your device. To turn on your smartphone, press the power button a second time. Allow for a complete reset of your device. You will be able to enter winRE

The following steps will guide you through the process of entering safe mode while you are in winRE:

  1. Advanced options may be found on the Choose an option screen by selecting TroubleshootAdvanced options. Preferences for the first time After your device has restarted, you’ll be presented with a menu of alternatives. Safe Mode with Networking may be accessed by selecting option5 from the list or by pressing F5.

To learn more about troubleshooting a black or blank screen issue, read Troubleshooting black or blank screen errors (PDF). Remember that restarting your device should be sufficient to get you out of Safe Mode and back into regular operation. In the event that for some reason your system continues to boot into Safe Mode on its own after restarting, attempt the following steps:

  1. Enter msconfig in the Openbox by pressing the Windows logokey plus R
  2. Then click OK. Select the Boot tab from the drop-down menu. Clear the Safe boot checkbox in the Boot settings section.
You might be interested:  How To Partition A Hard Drive Windows 10

How to start Windows 10 in Safe Mode and then exit later

  • A feature of Windows 10 called Safe Mode allows you to boot your computer into a state where most of its non-essential capabilities are deactivated. It is recommended that you boot into Safe Mode when you are debugging a problem or when Windows 10 would not start properly. For instructions on how to exit Safe Mode, go to the “Boot options” menu or just restart your computer. More stories may be found in Insider’s Tech Reference collection
  • Click here.

Safe Mode is a feature that is included in nearly every version of Windows. This allows you to start your computer with only the files and drivers that are absolutely necessary for it to function – most unnecessary features will be disabled, and programs will run more slowly as a result. By default, you will not even have access to the internet. Safe Mode, on the other hand, is not intended to be utilized on a regular basis. It is necessary to utilize Safe Mode when your computer is not functioning properly or when it will not begin to boot up at all.

Here’s how to start your computer in Safe Mode and then exit it when you’re finished.

How to boot in Safe Mode in Windows 10

There are several methods for entering Safe Mode, however the following are the three simplest.

Using the Power icon

If you’re logged in, you may do the following: 1.Click on the Windows symbol in the lower-left corner of the screen. 2.While holding down the Shift key, choose the Power symbol and then select Restart from the menu. While pressing the “Restart” button, keep the Shift key pressed. Insider photo courtesy of William Antonelli 3. You will be presented with a blue screen titled Choose a choice when your computer has restarted. SelectTroubleshoot, followed by Advanced options to complete the process.

  • Dave Johnson of Business Insider has contributed to this article.
  • Start by selecting Startup Settings and then Restarting your computer.
  • When you arrive to the final selection menu for Safe Mode, pick “Startup Settings” and then click Restart to go to the next screen.
  • When the screen returns, you’ll be presented with a number of alternatives.
  • Safe Mode may be used with or without internet connectivity.

Using the Settings app

1.Open the Settings application by hitting the Windows key + I simultaneously. 2.Click on UpdateSecurity, followed by Recovery. 3.On this page, beneath the heading Advanced startup, select the button labeled Restart now. To enter Safe Mode, select “Restart immediately” from the menu bar. Dave Johnson of Business Insider has contributed to this article. Upon restarting, your computer will display the Choose an option screen. In this section, selectTroubleshoot and then Advanced options.

Start by selecting Startup Settings and then Restarting the computer. 6.When your computer restarts, you’ll be presented with a number of launch options. Alternatively, press4 to boot your computer into Safe Mode, or5 to boot your computer into Safe Mode with internet access.

Holding down the power button

The Settings application may be accessed by hitting the Windows key + I. After that, select Recovery from the drop-down menu. The Restart now button may be found on this page, beneath the heading Advanced startup. For Safe Mode to be activated, click “Restart immediately.” Business Insider photographer Dave Johnson Upon restarting, your computer will display the Choose an optionscreen. For more advanced choices, select Troubleshooting from the drop-down menu. Start by selecting Startup Settings and then Restarting the computer.

6.When your computer restarts, you’ll be presented with a number of launch options to choose from.

Start your computer in Safe Mode by pressing 4 or 5 on your keyboard.

How to exit Safe Mode

Exiting Safe Mode can be accomplished in one of two ways. The first — and most straightforward — solution is to just restart your computer. This may be accomplished by pressing and holding the power button or by selecting it from the Start menu. If you’ve rebooted your computer but it’s still in Safe Mode, you should do one of the following things. 1.To enter the Run menu, press the Windows key + R at the same time. 2.In the text field, typemsconfigand hit the Enter button. In Safe Mode, the Run command should still be accessible.

  1. 4.UnderBoot settings, make sure that the Safe boot option is not selected.
  2. The menu that you are searching for should look somewhat like this.
  3. Business Insider photo courtesy of Ross James Tech Reference’s William Antonelli is the editor and a staff writer.
  4. A founding member of the Reference team, he has contributed to the growth of Tech Reference from its humble beginnings into a behemoth that receives more than 20 million visits every month.
  5. On news networks such as Newsy, Cheddar, and NewsNation, he is also a go-to source for technology insight.
  6. Dave Johnson is a free-lance writer based in New York City.
  7. Dave grew up in New Jersey before joining the Air Force, where he worked as a satellite operator, space operations instructor, and space launch planning specialist.
  8. A photographer who has shot wolves in their natural surroundings, Dave is also a dive instructor and the co-host of many podcasts, all of which can be found on his website.

Besides being the author of more than a dozen books, Dave also contributes to a variety of websites and magazines such as CNET, Forbes, PC World, How To Geek, and the Insider magazine. Ross James is a Business Insider contributor who works as a freelance writer.

How to Get Out of Safe Mode in Windows 10

  • Start by going to the Start menu, selecting the power button, and selecting Restart
  • Press the keys Ctrl+Alt+Del and then findRestartby pressing the power button. Uncheck the box labeled “Safe boot” in the System Configuration utility.

This article explains how to exit Safe Mode on Windows 10 and what to do next. There are various methods for exiting Safe Mode and returning to Normal Mode, but the option you choose will be determined by how you entered Safe Mode in the first place.

How to Exit Safe Mode From the Desktop

There are several distinct ways to boot into Safe Mode, and there are also different ways to exit Safe Mode. Typically, you’ll be at your computer’s desktop when you notice the “Safe Mode” letters in the corners of a black backdrop. The process of exiting Safe Mode in this case can be accomplished in a variety of ways, depending on how you got there in the first place. If you utilized Shift+Restart or theAdvanced startup option in Settings, or if you’re not sure how you wound up in Safe Mode in the first place, the quickest and most straightforward solution is to restart Windows normally:

  1. Start by selecting Start from the Start menu. If you’re on the lock screen and thus don’t have access to the desktop, you may still quit Safe Mode without signing in by pressing the power button on the right and selectingRestart from the drop-down menu. However, if this does not function in the majority of cases, you’ll need to sign in and follow the instructions provided further down. Select the power button in the bottom-left corner of the screen
  2. Then select Restart.

In most circumstances, a reboot should resolve the issue; but, if you find yourself in a booting into Safe Mode cycle that you can’t get out of, it’s likely that you got there by altering a setting in the System Configuration program, which remains in effect even after a reboot. In this circumstance, returning to the themsconfigtool and removing theSafe bootoption will let you to leave Safe Mode:

  1. To launch the Run dialog box, press WIN+R at the same time. Enter the command msconfig and then press Enter or OK. Enter the Boottab and uncheck the Safe boot option. If you get a prompt, chooseRestartif you want to restart the computer normally. If you don’t see a prompt, chooseOK.

How to Exit Safe Mode With Command Prompt

Alternatively, if you booted into Safe Mode with Command Prompt and all you see is the Command Prompt window, you have two choices: Alternatively, press Ctrl+Alt+Deland, then choose the power button followed byRestart, or follow the instructions below to restart your computer.

  1. Shutdown /r
  2. Type the following into the Command Prompt box: To submit the command, press the Enter key. The operating system will reboot for a brief period of time, exiting Safe Mode in the process. If you are forced to restart your computer in Safe Mode, follow the procedures below:

In addition to using thebcdeditcommand from a Windows installation disc, you may also enter Safe Mode by selectingAlternate shellin the System Configuration tool. In the event that you entered Safe Mode using one of those techniques, the restart command will not be sufficient to escape it. Instead, to prevent your machine from booting into Safe Mode, type the following into the Command Prompt: bcdedit /deletevaluesafeboot is a command-line tool. After hitting Enter, you’ll get a notification stating that the task has been done successfully.

Either of these options will exit Safe Mode and return you to Normal Mode.

  • What is the best way to exit Safe Mode in Windows 10 without entering a password? The Shift+Restartcombination will allow you to access Advanced Startup Options and the Command Prompt if the restart button does not return you to your previous state. Following that, you may proceed with the Command Prompt procedures indicated above. Assuming the problem is due to a lost password, you can reset your Microsoft account password (or use a password reset disk, if you have one) or use a password reset disk to reset your password. What is the best way to bring a Dell laptop running Windows 10 out of Safe Mode? The following techniques can be used to exit Safe Mode on Dell laptops running Windows 10: logging out and logging back in again
  • Rebooting the device from the login screen
  • Or using the Command Prompt.

Thank you for informing us about this!

How to Exit Safe Mode on Windows 10

Windows 10’s safe mode is one of the diagnostic modes available (and any other version of Windows). When your Windows 10 computer is in safe mode, the operating system is configured to function with the bare minimum of drivers and services available. It is possible to start your computer in safe mode in order to troubleshoot problems with your operating system or with your apps. You may exit safe mode by simply restarting your computer when you have finished troubleshooting the problem. However, things are not always as straightforward as that.

After they have started their computer in safe mode, they will not be able to switch back to regular mode.

This is quite inconvenient and even a little frightening.

And you may be frantically attempting to come up with a solution.

The solutions listed below have been shown to be effective in assisting many Windows 10 users to leave safe mode. It may possibly be of assistance to you. Simply give it a shot. Method 1: Disable safe booting in the System Configuration menu. Method 2: Using the Command Prompt, delete the safe boot.

Method 1: Turn off safe boot in System Configuration

Because the safe boot option in System Configuration is activated, it is possible that you will become trapped in safe mode. You can disable that setting and see if you can bring your computer out of safe mode on its own. To switch off safe boot, do the following: 1) To open the Run dialog box, simultaneously press the Windows logo key and the R key on your keyboard. 2)In the Run dialog box, type “msconfig” and click the Enter key on your keyboard to launch the program. System Configuration will be opened as a result of this.

After that, press the OK button.

If this method works for you, your computer will exit safe mode and resume in regular mode after a short period of time.

Method 2: Delete safe boot using Command Prompt

Delete the safe boot element from the boot settings of your machine is another approach you might try to exit safe mode. This can also prevent your computer from booting into safe mode when you first turn it on. This is something that has to be done in Command Prompt. To do so, follow these steps: 1) To open the Run dialog box, simultaneously press the Windows logo key and the R key on your keyboard. Enter “cmd” in the Run dialog box and click Enter on your keyboard to launch the command prompt.

In the Command Prompt, input the command line below and click Enter on your keyboard to complete the process (this will delete the safe boot element).

4)Press the Enter key after typing the command line below (this will reboot your computer after a while).

PC stuck and cannot exit Safe Mode in Windows 11/10

This guide will assist you if you find that your PC has become stuck in Safe Mode and you are unable to exit Safe Mode on Windows 10/8/Windows 7 at all. In order to diagnose or debug Windows problems, we frequently boot into Safe Mode. This is because when you start Windows in Safe Mode, the operating system only loads the bare minimum of drivers, files, and apps that are essential for the operating system to function. What do you do if you discover that you are unable to exit Safe Mode, and that every time you restart your computer, you are thrust back into Safe Mode!

As a result, let’s take a look at how to get out of or leave Windows Safe Mode.

Cannot exit Safe Mode in Windows 11/10

1] To open the Runbox when in Safe Mode, press the Win+R keys together. To access the System Configuration Utility, type msconfig and press Enter on your keyboard. Make sure that the Normal starting option is chosen under the General tab. In the Boot tab, make sure that the Safe Bootoption is unchecked under the Boot choices section before proceeding. Restart your computer once you have clicked on Apply/OK. This should be of assistance to you! 2] If it does not, then go to the next step. To open the Runbox when in Safe Mode, press the Win+R key combination.

  • This will launch a Command Prompt with elevated privileges.
  • When you run the BCDEdit /deletevalue command, it will delete or remove a boot entry option (as well as its value) from the Windows boot configuration data store (BCD).
  • For this purpose, open up a Command Prompt elevated to the elevated command prompt and type the following:bcdedit /deletevaluesafeboot After that, restart your computer and check to see whether it has booted into Normal Mode.
  • If your Safe Mode is not functioning, please see this post.
  • Anand Khanse is the administrator of TheWindowsClub.com.

Please take the time to read the full post. first, build a System Restore Point before making any modifications to your system, as stated in the comments When installing freeware, be cautious of any third-party offers that may appear.

Windows 10 security: How to exit Safe Mode in Windows 10 – how to use Safe Mode

Sign up forFREE to receive the latest news, reviews, and tech hacks from the greatest names in entertainment. Invalid email address We use the information you submit about yourself to serve you with material in ways that you have consented to and to enhance our knowledge of you. This may contain advertisements from us as well as advertisements from third parties depending on our understanding. You have the option to unsubscribe at any time. For further information, please see the following link: Ransomware and malware are on the rise, which means that Windows 10 users must be on the lookout for threats in order to secure their data.

You might be interested:  How To Update Drivers Windows 10

Safe Mode is one of the options available, and it is meant to assist in the resolution of the vast majority of problems with Microsoft Windows 10.

How to enter Windows 10 Safe Mode:

Safe Mode is configured to load with the bare minimum of drivers, software, and services. When Windows 10 does not start normally, Safe Mode should be able to be launched without issue. Safe Mode is a useful tool for troubleshooting any issues that may arise. Begin the procedure to confirm that your computer has been properly shut down. MORE INFORMATION CAN BE FOUND AT: Which antivirus software is the most effective for Windows 10? Safe Mode is a feature of Windows 10 that disables unnecessary drivers and programs during the startup process (Image: Microsoft) Windows 10: Safe Mode can assist you in resolving the majority of Windows 10 issues.

Continue in this manner until the message Preparing Automatic Repair appears twice more.

Select Advanced options from the drop-down menu, and the system will launch the Windows Recovery Environment.

(Image: Getty) Windows 10: The operating system has the ability to attempt to resolve some issues on its own (Image: Microsoft)

How to exit Windows 10 Safe Mode:

If you want to escape Safe Mode, open the System Configuration utility by selecting Run from the Start menu. It is possible to use the keyboard shortcut (Windows key + R) and typemsconfigthen Ok. Tap or click the Boot tab, uncheck the Safe boot box, hit Apply, and then click Ok to save your changes. After that, restarting your computer will force Windows 10 Safe Mode to be exited.

How to Turn Safe Mode off in Windows 11 and Windows 10

What exactly is safe mode? The Safe Mode feature in Windows 11 / Windows 10 is a handy debugging tool that may be used in instances where your computer is unable to boot normally. By starting your system with a limited set of features and drivers, you will be able to resolve issues that you would not have been able to otherwise. However, if you were forced to live with this limited feature set, it would be a big problem for your health and well-being. That’s why we’re going to teach you today how to exit safe mode in Windows 11 / Windows 10 using the command prompt.

In the absence of an underlying problem with your computer, it will restore your computer to its previous state of operation.

If you don’t, you’ll probably wind up needing to restart your computer in safe mode again.

If nothing else is wrong with your computer, hitting the restart button should give you the choice to restart Windows 11 in its default configuration. To get there, all you have to do is follow these steps:

  1. Start by selecting “Start” from the Start menu, pressing the power button in the bottom-right corner, and selecting “Restart.” That’s all there is to it. As long as your operating system does not include any major problems, you will be able to resume normal operations from that point. For whatever reason you are unable to reach the Start menu, you may always use the shutdown /rcommand in Command Prompt instead

How To Turn off Safe Mode via System Configuration Settings

Safe mode may be turned off in Windows 11 / Windows 10 without the need for any further prompts by unticking the box in the system configuration menu. Here’s how you can go about it:

  1. Alternatively, press “Windows + R,” type “msconfig,” then hit “OK.” Open the “Boot” tab and uncheck the “Safe boot” box before pressing “OK.” When you restart your computer, it will immediately exit safe mode, allowing you to resume regular use of your computer.

How to Start Windows 11 / Windows 10 in Safe Mode

If you want to boot back into safe mode at a later time, you may simply reverse the procedure described in the preceding subsection. If you are unable to use the system configuration tool, you may learn more about how to boot in safe mode by reading our comprehensive tutorial, which includes various alternative approaches.

How to Perform a Clean Boot in Windows 11 and Windows 10

In the future, you should consider learning how to execute a clean boot, rather than booting into safe mode, in order to save time. The ability to fix starting services and drivers without having to disable key Windows services is a significant advantage.

How to get out of Windows Safe Mode

In order to correct the situation, you must boot into Safe Mode. As a result, it is not acceptable when Safe Mode is the issue that has to be addressed. The problem with your Windows PC is that it will not stop booting into Safe Mode unless you identify the source of the problem. What prompted you to boot your computer into Safe Mode in the first place? I’m assuming you did that on purpose, but how did you do it? The problem is that you did it using the System Configuration tool, which is your fault.

  • This brings up the System Configuration window.
  • Uncheck the Safe boot option if it is currently selected.
  • For the sake of future reference, avoid entering Safe Mode through System Configuration unless you have a compelling need to do so on a regular basis in your environment.
  • Make sure the Safe bootoption is checked before proceeding.
  • The method you use to accomplish this may vary depending on your Windows version and the age of your computer.
  • When theAdvanced Boot Optionsmenu appears, pick the option that says “Start Windows Normally.” This may also work on certain Windows 8 computers, as well as those that have been updated to Windows 10.
  • When you get to the Shutdown option, hold down the Shift key as you selectRestart.
  • Startup PreferencesRestart the computer.
  • As a substitute for launching Windows, it will display a Startup Settings screen, which will have several configuration settings.

How to get out of Safe Mode on Windows 10 • Pureinfotech

Using Safe Mode, you may start Windows 10 with a stripped-down set of features and drivers to diagnose and solve problems when your device won’t boot normally. Safe Mode is useful when your device won’t boot properly. Safe Mode may be accessed in a variety of ways in Windows 10, including through the Power menu, Command Prompt, System Configuration (msconfig), and the Settings app.

However, once you’ve entered Safe Mode, exiting the mode will require a different set of procedures depending on how you got there. In this article, you’ll learn the simple steps to exit Safe Mode and begin using Windows 10 in its default configuration.

  • Instructions on how to leave Safe Mode after using the Power menu or the Settings menu
  • How to leave Safe Mode after using the Command Prompt or the MSConfig command line interface

How to exit Safe Mode after using Power menu or Settings

To exit Safe Mode if you entered it using the Power menu by pressing the Shift + Restart keyboard shortcut or the “Advanced startup” option from the Settings app, follow these steps:

  1. Start by pressing the Start button
  2. Then press the Power button
  3. Then press the Restart option. Making a full recovery from Safe Mode by restarting Windows 10

The machine will restart as soon as you have completed the procedures, and Windows 10 should start in its default configuration.

How to exit Safe Mode after using Command Prompt or MSConfig

If you altered the boot settings using the Bcdedit command or the boot options using MSConfig, you’ll need to undo the modifications in order to get out of Safe Mode.

Getting out Safe Mode using Bcdedit

Following the modification of the Bcdedit settings, follow these procedures to exit Safe Mode:

  1. Open the Start menu, type Command Prompt into the search box, right-click the first result, and pick theRun as administrator option
  2. To prevent Safe Mode from being activated on startup, type the following command and hit Enter: Bcdedit /setdisplaybootmenu is a command that displays the boot menu. noDisable Safe Mode after executing the Bcdedit command
  3. No Restart your computer to get things going again.

After you have completed the procedures, the gadget will begin to operate in its default state.

Getting out Safe Mode using MSConfig

After making changes to the System Configuration settings, follow these steps to leave Safe Mode:

  1. System Configuration may be accessed by going to Start, searching for formsconfig, and selecting the first result. To begin, click on the Boottab. Clear the Safe boot option in the “Boot options” section of the configuration. After modifying msconfig in Safe Mode on Windows 10, exit the mode. Click on theApplybutton and then on theOKbutton. Restart your computer to get things going again.

Once you have completed the instructions, Windows 10 will begin to operate in regular mode by default. We may receive a commission for purchases made via our links, which allows us to continue to provide free content. Information on our privacy policies. All of the material on this site is given “as is” with no guarantees of any kind, either stated or implied. Any information is used at the user’s own risk. Preserve a backup of your device and its contents before making any modifications. Information on our privacy policies.

How to Start Windows 10 in Safe Mode (While Booting) [6 Ways]

Windows 10 Safe Mode is an important diagnostic tool that may assist you in identifying and correcting the causes of Windows 10 PC issues. This page gives six different methods, each with step-by-step instructions, for starting Windows 10 in Safe Mode (when booting) in order to troubleshoot the issues you are experiencing with your Windows 10 computer.

How to Start Windows 10 in Safe Mode – Quick Guide

  1. Click StartPowerRestart while pressing and holding the Shift key on your keyboard. Advanced troubleshooting options may be found by clicking TroubleshootAdvanced options. Startup PreferencesRestart your computer once you type Win-RE. To boot into Safe Mode in Windows 10, use the F4, F5, or F6 keys on your keyboard.

Is your Windows 10 computer not performing optimally? Once a computer has been infected with malware or a virus, or if certain incorrect drivers have been installed, the machine may not function normally and may freeze or crash from time to time. Windows 10 Safe Mode may be useful in diagnosing and repairing computer problems. Click here to learn more. So, what is the procedure for starting Windows 10 in Safe Mode (while booting)? Check out the 6 methods with thorough instructions on how to boot into Safe Mode in Windows 10, as well as how to utilize Safe Mode to solve issues on a Windows 10 computer.

Tip:MiniTool Power Data Recovery- Recover any deleted or lost files from a Windows computer, USB drive, memory card, external hard drive, SSD, or any other storage device using this program.

Download it for free.

Windows 10 Safe Mode

Safe Mode is a diagnostic mode incorporated into the Windows 10 computer operating system (as well as Windows 7, 8, and other versions). Start your Windows 10 computer in Safe Mode, and it will only enable you to start up the most basic system apps and services throughout the booting process. A Windows 10 machine that has been booted into Safe Mode is a more basic version of the computer.

Windows 10 Safe Mode is intended to assist users in troubleshooting the majority of issues that may arise inside the Windows 10 operating system. It is also commonly used for the removal of viruses and ransomware from computer systems.

How Does Windows 10 Safe Mode Work?

The operating system will be started in Safe Mode with only the core components, and many additional non-essential drivers or services, such as video drivers and sound, will be deactivated. Startup applications developed by other parties are likewise barred from loading. As a result, it is much easier to determine the root cause of operating system issues. For example, you can start Windows 10 in Safe Mode to determine whether the misbehaving Windows 10 PC is caused by the Windows 10 default settings and drivers, or to determine whether the installation of poorly configured software/programs has prevented the Windows 10 PC from booting in a normal state.

Furthermore, if you are unable to start your Windows 10 computer normally, you may be able to start Windows 10 in Safe Mode instead.

When You Need to Start Windows 10 in Safe Mode

If your Windows 10 computer appears to be having troubles, isn’t functioning properly, crashes or freezes frequently, or displays a blue screen or black screen from time to time, you may want to try starting Windows 10 in Safe Mode to resolve some Windows 10 issues.

The Three Types of Windows 10 Safe Mode

Safe Mode is available in three different flavors in Windows 10. You have the option to launch Windows 10 into any form of Safe Mode depending on your requirements.

  • Safe Mode should be enabled: This is the most fundamental sort of Safe Mode. This feature begins Windows 10 by loading the most important settings and services that the system has to offer. Any additional unneeded applications, drivers, or services will be prevented from being loaded. This puts the PC in a more secure state by shutting off the possibility of malware or viruses spreading through third-party software, drivers, and local networks
  • Safe Mode with Networking should be enabled: It will add further essential drivers and services that are required to access networks if you opt to start Windows 10 in Safe Mode with Networking, while preserving the same set of drivers and services that are available in Safe Mode. This is not as safe as Safe Mode, but it is handy when you need to access the Internet
  • Nonetheless, it is not recommended. If you select to start Windows 10 in Safe Mode with Command Prompt, your computer will display a large Command Prompt window on the screen. Professionals may quickly and effectively resolve connected issues on a Windows 10 computer by using command line tools. However, if you are unfamiliar with CMD, it is not recommended that you take this option. It is not possible to connect to the network when in Safe Mode or Safe Mode with Command Prompt.
You might be interested:  How To Turn Down Screen Brightness Windows 10

Let’s get straight to the point: learn how to start Windows 10 in Safe Mode in six different methods, including through Settings, msconfig (System Configuration), the Start menu, the F8 key, the sign-in screen, and a black or white screen.

How to Start Windows 10 in Safe Mode – 6 Ways

  1. Start Windows 10 in Safe Mode from the Settings menu
  2. Boot Windows 10 into Safe Mode using the msconfig command line utility
  3. While booting from the Start Menu, start Windows 10 in Safe Mode to protect your data. Beginning with the Login Screen, start your Windows 10 computer in Safe Mode. Start Windows 10 in Safe Mode from a Black/Blank Screen by pressing F8. While booting in Safe Mode Windows 10 with the F8 key, you can:

Quick Video Instructions:

1. How to Start Windows 10 in Safe Mode from Settings

If you’ve already signed onto your Windows 10 computer, you may use the Advanced Startup feature to boot into Safe Mode in Windows 10.

Step 1 – Open Windows Settings

On a Windows 10 computer, you may access the Start menu and the Settings menu. Alternatively, press Windows and I keys on the keyboard to launch Windows 10 Settings.

Step 2 – Enter into Startup Settings Window

Afterwards, you may click Update Security, choose Recovery from the left-hand panel, and then click Restart nowunder Advanced startup to boot into Windows Recovery Environment (Recovery Environment). Following that, you may select Troubleshoot -Advanced options. -Startup Options-Restart the computer.

Step 3 – Choose a Safe Mode Option

To start Windows 10 in Safe Mode, you may now select your chosen Safe Mode option from the Start menu. Press 4 or F4 on the keyboard to start your Windows 10 computer in Safe Mode; press 5 or F5 to boot Windows 10 in Safe Mode with Networking; and press 6 or F6 to reach the Command Prompt in Windows 10 in Safe Mode. What is the best way to block the Windows 11 update? You may prevent automatic updates on Windows 11 using one of the five ways detailed in this blog article. Please refer to the step-by-step tutorial.

2. How to Start Windows 10 in Safe Mode through msconfig

If you are able to log into the Windows 10 system, you may also attempt another method of booting into Safe Mode in Windows 10, which is the use of the Windows System Configuration (msconfig.exe) utility.

Step 1 – Open Windows System Configuration Tool

You can also access the System Configuration program by using the Windows+Rkey combination, typing msconfig in the WindowsRUNwindow, and pressing the Enter key.

Step 2 – Select a Safe Boot Option

After that, you may click the Boottab button. In the Boot choices section, you may select your favorite Safe boot option based on your specific requirements.

  • Minimum equals Safe Mode
  • Alternate shell equals Safe Mode with Command Prompt
  • Network equals Safe Mode with Networking
  • Minimal equals Safe Mode with minimal. It is possible to repair the Active Directory server using the Active Directory repair option.

In general, you may start Windows 10 in Safe Mode by selecting either the Minimal or the Network options. This allows you to diagnose problems with your Windows 10 PC. By starting Windows 10 in Safe Mode with msconfig, your machine will automatically start in Safe Mode every time you boot your Windows 10 computer. Tip: Check read the section of this page titled “How to get out of Safe Mode Windows 10” for further information on how to exit Safe Mode. If you have forgotten your Windows 11 password, you can use one of the six options listed in this post to reset or bypass your password.

  • If you are able to log into Windows 10, you may boot into Safe Mode on Windows 10 by selecting Startmenu from the Start menu.
  • On Windows 10, you may press and hold the Shift key on the keyboard while clicking the Startmenu button.
  • Step 2.Once you have reached theChoose an optionscreen, you may select Troubleshoot -Advanced choices from the drop-down menu.
  • Step 3.Press the F4, F5, or F6 keys to select a preferred Safe Mode option to start Windows 10 in Safe Mode while the computer is booted up.

4. How to Start Windows 10 in Safe Mode While Booting from Login Screen

If you are unable to connect in to Windows 10 but are able to access the Sign-in page, you may enter Safe Mode in Windows 10 by pressing Shift + Restart from the login screen, if you are unable to log in to Windows 10. Step 1: You can restart your Windows 10 computer at this point. Alternatively, when you see the Sign-in page, you may press and hold the Shiftkey without releasing it, and then click the Powericon at the bottom-right of the screen and select Restart. Step 2.Once you have arrived at the WinRE interface, perform the following actions: Advanced options for troubleshooting -Startup Options -Restart the computer.

Press F4 to start Windows 10 in Safe Mode, or F5 to start Windows 10 in Safe Mode with Networking, after which you may exit Safe Mode.

5. How to Start Windows 10 in Safe Mode from a Black/Blank Screen

If your Windows 10 computer is unable to start normally, you can select to boot the computer into Safe Mode in order to diagnose the problem there. For your Windows 10 PC to boot into Safe Mode from a black or blank screen, you must first enter the Windows Recovery Environment (WinRE) by turning the computer off and on three times.

Step 1. Enter into WinRE

You can power off your computer by pressing and holding the Power button on your computer for 10 seconds, and then turn it back on by clicking the Power button once again. While the computer is about to boot into the operating system (for example, when the computer is restarting), click the Powerbutton on the right side of the keyboard for about 10 seconds to switch the device off and back on again. To switch off and on your Windows 10 computer three times, repeat the method described above. When the computer is switched on for the third time, it should automatically open theAutomatic Repairwindow.

You can attempt additional choices to repair your Windows 10 PC if theAutomatic Repaircan’t fix your issues. If theAutomatic Repaircan’t fix your problems, you can clickAdvanced optionsto access theWindows Recovery Environmentscreen and try other options to repair your PC.

Step 2. Enter into Startup Settings

By selecting Troubleshoot -Advanced options from inside the WinRE window, you can then navigate to the Startup Settings window and configure your system. -Startup Options -Restart the computer.

Step 3. Start Windows 10 in Safe Mode with Networking

Press F5 to start your Windows 10 computer in Safe Mode with Networking after that. This is also a recommended alternative if you are trying to troubleshoot a computer screen that is black or blank. On the Internet, you may look for answers to the problems you’re having.

6. How to Boot in Safe Mode Windows 10 While Booting through F8 Key

In Windows 7, you may visit the Advanced options panel by pressing the F8 key repeatedly before login into Windows. And we know that this strategy does not work on Windows 10 and Windows 8 because Windows 10 and Windows 8 have significantly quicker startup times. The BCD (Boot Configuration Data) Edit command, on the other hand, may be used to restore the functionality of F8 in Windows 10.

Step 1. Open Administrator Command Prompt window

To launch the RUNwindow, you can hit the Windowskey and the Rkey on your computer keyboard at the same time. then typecmin to the text field and click theCtrl+Shift+Enterkey combination to bring up the Administrator Command Promptwindow on your screen Please do not simply click OK because this will not result in the Command Prompt (Admin) window being shown.

Step 2. Reactivate F8 key function

Afterwards, you may use the following command: bcdedit /setbootmenupolicy heritage. And then press the Enterkey.

Step 3. Reboot Windows 10 PC in Safe Mode

Following that, you may exit the Command Prompt window and restart your computer. Using the arrow keys on your keyboard, you can choose to start Windows 10 in Safe Mode, Safe Mode with Networking, or Safe Mode with Command Prompt.Tip:Please keep in mind that you can only reactivate the F8 function in Windows 10 if the Windows PC can start normally. If the Windows PC cannot start normally, the F8 function will not be available again. Even if you are unable to access your Windows 10 computer, you should try one of the other methods described in this post to boot into Safe Mode.

Press the Enter key to restart the computer once more.

How to Get Out of Safe Mode Windows 10

To exit Safe Mode in Windows 10, you can follow the steps outlined below to complete the task. Step 1. On the keyboard, you may hit the Windows and R keys simultaneously. In the next window, type msconfig and press Enter again to bring up the System Configurationwindow. Step 2.Press the Boot button and uncheck the Safe boot option, then press OK. After that, the next time you start your Windows 10 machine, it will boot into the standard interface. To send a tweet, simply click here.

How to Use Safe Mode to Fix Your Windows 10 PC Issues

Starting your Windows 10 computer in Safe Mode might assist you in resolving various issues with your machine.

1. Recover Lost Data/Files in PC

The loss of crucial data and files, as well as the inability to start Windows 10 properly, can occur if your computer is infected with malware or viruses, or if your computer has a system crash or hard disk issue. You may use the finest free data recovery software, such as MiniTool Power Data Recovery, to effortlessly recover deleted files or lost data after you have accessed Windows 10 in Safe Mode. The process is as follows: A 100 percent clean data recovery program, MiniTool Power Data Recovery is compatible with Windows 10/8/7 and is available for free download.

  • Download and install MiniTool Power Data Recovery on your Windows 10/8/7 computer, and then follow the thorough instructions below to recover your lost data and files quickly and easily.
  • Step 1: Launch MiniTool Power Data Recovery and enter the recovery mode.
  • Step 2 – Run a search for lost data on your computer.
  • The program will automatically search for any lost, deleted, and normal data on that sector.
  • Step 3 – Examine and save the files that have been lost You may then browse through the scan results to locate your desired files and save them to a different disk or partition, an external hard drive, a USB drive, or any other location you want when the scanning process is complete.
  • The Show Lost Files, Find, and Filter options are provided to assist you in rapidly locating the files you are looking for.
  • For this reason, you can download and install MiniTool Power Data Recovery Free on your computer while it is in Safe Mode in order to recover lost data on your computer.

MiniTool Power Data Recovery can recover data and files from a Windows 10 PC even if the device is unable to boot or even start in Safe Mode due to a problem with the operating system. Guides that are related include: How to Recover Data When Your Computer Will Not Boot

2. Remove Malware or Virus

It is possible to boot Windows 10 into Safe Mode in order to check for and remove malware or viruses if your computer has crashed or stopped operating as a result of a malware or virus infestation. To search for and eliminate malware and viruses on your computer, you may also utilize Windows Defender on Windows 10. Alternatively, if you don’t already have an antivirus application installed on your Windows 10 computer, it is possible to download and install one in Safe Mode, but only if you start Windows 10 in safe mode with networking enabled.

3. Uninstall Improper Software

If your Windows 10 computer is unable to start or function correctly due to certain newly installed apps that may have conflicting drivers, you may delete the suspect software from the Control Panel while the machine is running in Windows 10 Safe Mode. Afterwards, restart your computer to see if the problem has been resolved.

4. Perform System Restore

If your Windows 10 computer has been acting strangely lately, you may do a System Return to restore the system to a previous state in which it was in a decent configuration to restore stability. What happens, though, if Windows 10 System Restore becomes stuck in the typical Windows 10 start mode? It is possible to restart Windows 10 in Safe Mode and perform a successful System Restore without the operating system crashing. In addition to the options listed above, you may boot into Safe Mode to resolve issues such as the Windows 10 black screen, blue screen errors such as the Kernel Data Inpage Error, and more.

Bottom Line

This page provides step-by-step instructions on how to start Windows 10 in Safe Mode (when booting) in six different scenarios. It is possible to start Windows 10 in Safe Mode to solve difficulties with your Windows 10 computer and recover lost data and files using MiniTool Power Data Recovery Free if your machine is not performing properly, cannot boot, or has other problems. If you are still having difficulties with how to boot into Safe Mode on Windows 10, please get in touch with us.

Windows 10 Safe Mode FAQ

How can I start Windows 10 in Safe Mode while the computer is loading up? To allow you to start Windows 10 in Safe Mode while booting, this tutorial provides six different methods, each with a full walkthrough. You can give one of them a shot. What is the best way to start Windows 10 in Safe Mode? You may use any of the six methods listed in this post to quickly boot into Safe Mode on Windows 10. How can I start my computer in Safe Mode? Safe Mode may be accessed using a variety of methods, including Settings, msconfig, the Start Menu, the Login screen, the F8 key, and so on.

Is it possible to boot into Safe Mode via the BIOS?

Leave a Comment

Your email address will not be published. Required fields are marked *