How To Make An Image Of Windows 10

Contents

How to: Create a system image in Windows 10

We recommend that you try a lower page number. * Please enter only numbers. * We recommend that you try a lower page number. Please only enter digits in this field. This does not function. Windows 10 throws a tantrum. Several various errors, unable to locate a volume, and a backup disk Is not accessible, and so forth. There have been several recommendations for how to resolve this issue, but no answers have been found. This remark was useful to 1240 people. Did you find this comment helpful? Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

  • What exactly went wrong?
  • Did you find this comment helpful?
  • Great!
  • What level of satisfaction do you have with this comment?
  • What level of satisfaction do you have with this comment?
  • When you try to pick (C:) (System), the choice is grayed out and cannot be chosen.
  • Was this remark of assistance?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

The approach described here repeatedly generates the error number 0x80042306 – backup failed.

Did you find this comment helpful?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

My computer is displaying the same issue codes as everyone else’s, and I have yet to discover any proposed remedies that are actually feasible fixes.

Did you find this comment helpful?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

This approach is deemed invalid by the system.

A total of 0x80042306120 people considered this remark to be useful.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

Windows 8 was previously installed on my computer, which I successfully converted to Windows 10 (which I enjoy very much).

Did you find this remark helpful?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

In response to a previously deleted message Perhaps a recent patch has been implemented, since the System Image Backup, as displayed in the File History panel, appears to be functional for me.

It is merely a link to a web site that sells an alternative backup tool, as provided by CrunosCody.

Did you find this comment helpful?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

I attempted to backup the system image for Windows 10.

I’m going to try again, this time visiting every Microsoft help forum and contacting Microsoft website tech online assistance.

Was this remark of assistance?

Great!

What level of satisfaction do you have with this comment?

What level of satisfaction do you have with this comment?

I simply followed the instructions and this is what I received?

Thank you.

This remark was deemed to be useful by 293 people.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

What level of satisfaction do you have with this comment? Thank you for taking the time to provide comments. * Please try again with a lower page number. Please input just digits. * Thank you. Please try again with a lower page number*. Please only enter digits in this field.

How to create a system image in Windows 10

CNET photo by Sarah Jacobsson Purewal The system image backup utility is one feature that has been significantly removed from the new Windows 10 Settings menu. If your computer crashes, you may use a system image backup to completely restore your computer, including all of its settings, in the case of a disaster. A system image backup is a copy (“image”) of a disk. In Windows 7, Microsoft introduced the system image utility, which the company later attempted to obscure in Windows 8 and Windows 8.

However, although it is currently buried in the Windows 10 Technical Preview, the Recovery portion of the Updaterecovery page does mention system images (under “Advanced startup”), so I am hopeful that the system image utility will continue to be available when Windows 10 is officially released.

  • Sarah Jacobsson Purewal/CNET contributed this screenshot.
  • Navigate toFile History in the Control Panel.
  • You should notice a link to System Image Backup, which should be at the bottom of your left pane, under “See also.” Please click on this link.
  • The System Image Backup program will be launched at this point.
  • Confirm your choices by clicking the Start backup button.
  • To utilize your system image to restore your computer, go to the new Windows 10 Settings menu and choose Updaterecovery from the drop-down box.
  • When your computer restarts, select Troubleshoot > Advanced Options > System image recovery from the Start menu.

How to Make a Full System Image Backup on Windows 10

Recent experiences with dual-boot Windows setups have resulted in the loss of my primary Windows installation, which I discovered while exploring. Then I questioned myself, “Why didn’t I make a backup before I started this?” I wondered. I’m still going through the arduous process of installing and setting all of my favorite apps, and it’s possible that I won’t be able to bring everything back to the way it was. When faced with this nightmare scenario, you should strongly consider creating a full system image backup of your brand new Windows 10 installation.

Because you’ll always have a full system image backup on hand, you’ll always be able to restore your computer to the state it was in before the problem occurred. This is true regardless of what catastrophic failure caused the problem in the first place.

What You’ll Need

Before you can begin the process of producing a system image backup, you must first ensure that you have a location where you will store the backup image. In a perfect world, you would have either a backup hard drive with lots of storage space connected to your computer directly or over a network, a large enough USB drive or memory card, or a collection of blank DVDs and a disc drive that is capable of burning or writing media to your computer. A fourth alternative is to partition your primary hard disk in order to free up the storage space required for a system image backup and restore.

Creating a System Image Backup

Starting with the Windowsbutton on your keyboard, type “File History” and hit theEnter key to continue. From the window that appears next, select the “System Image Backup” button in the bottom-left corner of the display. In the following step, look in the left-hand pane once more and choose the option labeled “Create a system image.” At this moment, the system image utility will be displayed on the screen. The first box asks you where you’d want to store your system image, and you have the choice of saving it to a hard disk, a DVD, or a network drive.

  • Following the click of “Next,” you’ll be prompted to pick the drives from which you’d want to generate a backup image of.
  • If you have any questions, contact the support team at [email protected]
  • In the event that everything appears to be in order, go ahead and select “Start backup.” The backup procedure will take anything from 10 minutes to an hour or more, depending on how many files and volumes you choose to back up.
  • This step is completely optional, so you are free to omit it if you so like.

Restoring from a System Image Backup

If you ever find yourself in the position of having to restore your system image backup, the first step is to ensure that the disk containing the backup image is attached to your computer. Insert a Windows installation disc into your computer and launch into the setup program. Once you’ve reached the Windows setup screen, select “Next,” then “Repair your machine” from the drop-down menu in the lower-left corner. After that, pick “System Image Recovery” from the “Troubleshoot” menu, followed by “Advanced Options.” You may restore your computer to the same condition it was in when you produced the system image backup by selecting it from this menu and following the on-screen prompts to complete the process.

If so, please share your experience with us in the comment area below, or reach out to us onFacebook, Google+, or Twitter.

With a one-time purchase from the newGadget Hacks Shop, you can get a lifetime membership to VPN Unlimited for all of your devices, allowing you to stream Hulu or Netflix without being restricted by region, boost security when surfing on public networks, and much more.

Purchase Right Away (80 percent off) Other great discounts to consider are as follows:

  • 41 percent off a Wi-Fi analyser for the house
  • A learn to code package is available for 98 percent discount. A 98 percent discount on an accounting bootcamp is available
  • XSplit VCam video backdrop editor is on sale for 59 percent discount.

Cover picture courtesy of Shutterstock

How to Create a Windows 10 System Image Backup

Creating a System Image backup is a feature that you might be familiar with from Windows 7. It is also available in Windows 10. It may be used to restore your complete computer as well as specific files. Windows 10 provides a variety of options for backing up and recovering your data. One of the toolsets that you might be familiar with from Windows 7 is the ability to create a full system image backup. It is possible to utilize a system image to recover files or to restore your complete computer if you are unable to boot into Windows.

Create a System Image in Windows 10

To begin, press the Windows key on your computer and type control panel into the search box. Select the Control Panel application from the list of results. This will bring up the original Control Panel, which you may be familiar with from previous versions of Windows. Once the Control Panel is open, select Backup and Restore from the drop-down menu (Windows 7). Then, on the left-hand side of the menu, select Create a system image from the drop-down menu. Windows will search your computer for backup devices, and you may generate a system image in a variety of methods depending on your preferences.

  1. Note: Backing up to a network location, such as a NAS or Windows Home Server, is only recommended for experienced users and requires some effort.
  2. Unless you have a network share configured, you do not need to be concerned about this option.
  3. After selecting your disk and ensuring that everything appears to be in order, click Start Backup and wait for the image to be produced.
  4. Your gear and the amount of data you have will both have an impact on how long it takes to complete the process.
  5. If you haven’t already done so, build one right away so that you’ll be prepared to recover your computer if the need arises.

More on Windows 10 Backup and Recovery Tools

Windows 10 has a number of new backup and recovery tools that might be quite useful if something goes wrong with your computer. It is possible to restore Windows 10 while maintaining your files, or even downgrade to a prior version of Windows using the PC Reset option (within the first 30 days of upgrading). Furthermore, the Additional Recovery environment includes System Restore, System Image Recovery, Startup Repair, Selective Startup, as well as a command line for advanced troubleshooting options.

In fact, we demonstrated this technique when we discussed how to boot into Safe Mode in Windows 10.

There is also a File History feature that can be programmed to automatically back up your most critical data to a different disk or network location, which is useful when it comes to file recovery and backup in addition to creating a System Image.

There will be times when things are so awful (deeply entrenched malware, for example) that you want a new start, and that is when getting the Windows 10 ISO and doing a clean install will come in handy, as shown below.

If you haven’t yet updated your Windows PC to Windows 10, make a backup of all of your data before you begin the process. You might also want to consider creating a system image to have on hand. Check out the link below that corresponds to your system for a step-by-step tutorial on how to do it:

  • Create a backup of your Windows 7 system image
  • Create a backup of your Windows 8.1 system image
You might be interested:  When Will Windows 10 Support End

How to create an image backup in Windows 10 and restore it, if need be

How do you recover data from a crashed internal hard disk or solid state drive (SSD)? Or what if Windows becomes so messed up that it becomes unusable, if not unbootable altogether? You can always start over with a fresh installation of Windows. However, following that, you will have to reinstall all of your apps and then reconfigure your computer. You can restore Windows, your applications, and your customizations with only a few minutes of effort if you have a recent image backup on hand.

Image backup vs. file backup

An image backup transfers everything on your hard disk, including partitions and the boot sector, into a separate location. It’s the only way to fully back up your Windows system, including all of your programs and configuration options. Please don’t get this confused with a file backup, which simply replicates your data files (documents, photos, spreadsheets, and so on). The file backup is, by far, the most significant of the two options. While Windows and your apps may always be reinstalled, your company documents and family images are not among those that can be reinstalled.

If you are not already backing up your files on a regular basis, follow these three simple steps to get started.

A backup image should be created three or four times a year and saved to an external hard drive, according to my recommendations.

My previous articles on the subject addressed Windows 7 and 8.

How to create an image backup in Windows 10

1. Connect your external hard drive, which should have enough empty capacity to contain everything that is currently stored on your internal hard drive. (For this reason, theWD My Passport 4TBis our current top recommendation.) Double-check that Windows is able to access the disk. 2. Next, navigate to Control PanelBackup and Restore (Windows 7)—don’t be concerned about the “Windows 7” label. IDG3. In the upper left-hand corner, clickCreate a system image. If your backup disk is not already chosen on the next page, click IDG3 (or conversely choose the option to back up to DVDs or a network location).

It is possible that the backup will take many hours.

However, I like to start the backup towards the end of the workday so that it does not interfere with other activities.

If your computer is equipped with an optical drive, burn the disc.

Alternatively, you may use our tutorial to creating a recovery drive. When the time comes, you’ll be able to use this disk to restore your system image to its original state.

Restore the backup

1. Connect your external hard drive, which should have enough empty capacity to store everything that is now stored on your internal hard drive. Our current best choice for this function is theWD My Passport 4TB. Double-check that Windows is able to access the disk. 2. Then, go to Control PanelBackup and Restore (Windows 7)—don’t be concerned about the “Windows 7” designation. IDG3. In the upper left corner, clickCreate a system image. If your backup disk is not already chosen on the next page, click IDG3 to confirm (or conversely choose the option to back up to DVDs or a network location).

  • It might take many hours to complete the backup.
  • Although I like to start the backup at the end of the day so that it does not interfere with anything else, I understand why some people do so.
  • Produce a CD if your computer is equipped with one.
  • Follow our instructions on how to create a recovery drive instead.

How to Create an ISO Image of Your Windows System

Do you require a quick and simple method of backing up and restoring Windows without having to rely on backup software or the cloud for your data? There are several third-party Windows backup and restore solutions available, but they may be difficult to use and take a long time to complete. Consider learning how to create an ISO image of your Windows computer as an alternative.

Why Choose a Windows 10 Image Backup?

We are all aware of the need of regularly backing up our data, especially when upgrading to a new Windows version. Alternatively, rather of fiddling around with partitions for specific files or syncing to the cloud, why not simply back up your complete Windows system instead? You can include personal folders in an image backup, but you must exclude programs and games from the backup. Alternatively, you might generate a backup of your complete system drive using a third-party program. For such a backup, you would, of course, want a sufficient amount of storage space.

This effectively generates an identical replica of your complete hard drive or a selection of folders on your hard drive.

ISO files can also be used to create backups of existing CDs and DVDs.

Creating a Windows 10 ISO System Image With DataNumen

One common application for disk images is the creation of a backup of your hard storage (hard disk drive or solid-state drive), which may be nearing the end of its useful life. DataNumen Disk Image (a.k.a. “DDKI”) is one such solution that is accessible as freeware and operates on all versions of the Windows operating system. After downloading and installing the software, use the Clonetab to pick the disk you wish to clone; to clone numerous drives at once, use theBatch Clonetab. After downloading and installing the tool, run it.

This is the device on which you will be storing the backup.

Once you click Start Cloning, it will begin copying your disk to the target device, where it will be ready for you to use. This concept is covered in further depth in our article on HDD cloning. DataNumen Disk Image for Windows 10 may be downloaded here.

How to Create ISO Image Of Windows 7

Despite the fact that cloud backups are uncomplicated, there is no reason not to produce an ISO disk image for use in disaster recovery situations. You might create a representation of the system in its current condition. You might also build an image of a freshly installed operating system as an alternative method. Perhaps some of the applications and games that you have installed will be included in this category. Creating an ISO disk image is a function of the Windows 7 backup and restore capability, and it is available if you are using Windows 7.

  1. Make a copy of your files.
  2. Depending on the size of the volume, it might be an external hard disk drive or something else.
  3. Do you have a home server or a lot of storage on your network, possibly in the form of a network-attached storage (NAS) device?
  4. If you want to utilize a USB flash drive, attach it to your computer ahead of time and choose it as the destination before starting.
  5. The amount of space that will be taken up by the backup will be specified on the confirmation page.
  6. The length of time it takes will be determined on the size of the backup and the speed of the drive.

Restoring the Windows 7 Disk Image

You will be prompted to make a system restore DVD by Windows after the process is complete. This is a fine idea, so locate a blank disc and follow the on-screen directions. Following that, you may use this to start your PC and pick theSystem Image Recoveryoption to restore the ISO Disk Image of your Windows installation in the event of a calamity.

Creating an ISO Disk Image in Windows 8.1

Later versions of Windows have the same tool for making a disk image as the previous version. For this reason, you should have upgraded from Windows 8 to Windows 8.1 before continue with this section. To locate the system image generation tool, hit Start and type ” file history” into the search box. The automated search will display the item Restore your files withFile Historyfirst, so click on this to open theFile Historytool, followed by System Image Backupin the lower-left corner of the screen.

Following the creation of the ISO backup, follow the procedures outlined below for Windows 8.1 to restore the image in Windows 10. For disaster recovery purposes, you will need to boot into the Windows 10 equivalent of Safe Mode in order to restore the image from the backup.

Restoring Your Windows 8.1 Disk Image

The ability to fall back on an ISO image if a Windows 10 upgrade does not go as planned (for example, if you have a reboot loop) is a significant benefit. Windows’Advanced optionsscreen, which you can access by hitting the F8 key repeatedly while your computer is booting up, allows you to restore the Windows 8.1 disk image (or holdingShiftas you clickRestart). SelectRepair your ComputerSystem Image Recoveryfrom theAdvanced Startup Options menu and follow the on-screen steps to ensure that Windows is able to locate the ISO file.

  1. Use theRepair your computerlink and then theRepair button on theInstall now screen.
  2. Specify System Image Recovery as your destination, and then follow the on-screen directions to recover your Windows ISO system image.
  3. Users of Microsoft’s Windows 10 operating system may get the program for free from Microsoft.
  4. The following steps are required to make an ISO image using the Windows Media Creation Tool:
  1. Windows Media Creation Tool should be downloaded and launched. Make a selection ofCreate installation media (USB flash drive, DVD, or ISO) for another PC and then click on Next. Selecting the system architecture (you can create a system image that is either 64-bit or 32-bit or both-bit is possible), language, and Windows edition are all required steps now. If these options confuse you, you can always rely onUse the recommended options for this PC. To proceed, click on the Next button. The Media Creation tool will create an ISO image after you have selected the ISO file and then clicked Next.

It is advised that you have at least an 8GBUSB stick available for backing up the ISO file. Obtain the Windows 10 Media Creation Tool for Windows from the link below.

Backup Your Windows PC With an ISO Image

The creation of an ISO image backup of your full Windows system, as demonstrated above, is ideal for establishing a backup prior to doing a big system update. The ease with which an ISO may be made and then restored should make it a considerably more appealing alternative to simply backing up your data and praying for the best. How to Create ISO Disc Images that are Windows-Compatible on a Mac Create something that is Windows-compatible. ISO disc images may be created directly on your Mac without the need for any extra software or programs.

He has substantial expertise in desktop and software support, as well as a bachelor’s degree in computer science.

Christian Cawley has more to say.

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

How to Create Windows 10 System Image Backup and Restore It

Navigation is simple: click here to get to the home page.

Does Windows 10 has system image backup?

Windows 10 is, and continues to be, the most reliable and useable operating system launched by Microsoft to date. However, it is still vulnerable to a wide range of risks that might result in data loss and system failure, including natural catastrophes, malware assaults, human mistake, and unexpected malfunctions. As a result, creating a system image backup in Windows 10 is essential. So, you might be wondering if Windows 10 offers a system image backup feature. “File History” and “Backup and Restore (Windows 7)” are two of the most popular Windows image backup programs.

Creating a system image backup in Windows 10 is the latter of the two tasks. System backup software for Windows 7 was formerly available, and it is still available in Windows 10/11 under the name “Backup and Restore (Windows 7).”

How to create a Windows 10 system image backup and use it

Preparing a storage device to store the system image backup and connecting it in preparation is recommended before beginning to produce a Windows 10 system image using built-in Backup and Restore (Windows 7) in Windows 10. You may save your data on an internal hard drive, an external disk, a USB device, or a network drive. The most frequent method is to utilize a USB flash drive as a backup storage device and to backup Windows 10 to a USB drive. A system image of Windows 10 on USB may be created and restored using the steps in this example.

Part 1: Create Windows 10 image for deployment

Step 1: To begin, launch the Backup and Restore feature of the Windows 10 system image program (Windows 7). In the next section, you will find three different techniques.

  • Via the File History: Go to the “Control Panel,” choose “File History,” and then click “System Image Backup” in the lower left corner of the screen. Using the Control Panel: Go to “Control Panel” and then pick “Backup and Restore (Windows 7)” from the drop-down menu. The following steps may be completed using the Settings menu: Go to “Settings,” “UpdateSecurity,” “Backup,” and scroll down to “Looking for an older backup,” where you will pick “Go to Backup and Restore (Windows 7)”

The second step is to select “Create a system image” from the left-hand panel. After that, it will begin scanning your storage device and listing all of the files it finds. Step 3. Pick “On a hard disk” from the drop-down option and then select the USB device from the list. Then press the “Next” button. Nota Bene: If you are unable to locate the USB drive, please unplug and reconnect the device. Create a system image on a USB flash drive in Windows 10 by following these steps: Step 5. Confirm your backup options and click “Start Backup.” Following completion of the backup process in its entirety, you will be prompted to generate a system repair disc.

This approach necessitates the use of a CD/DVD disc.

Part 2: Restore Windows 10 from system image backup

If your machine is still able to boot, go to UpdaterecoveryRecoveryAdvanced startup and follow the instructions. Now is a good time to restart. After that, your machine will restart into the Windows recovery environment, where you should select TroubleshootAdvanced Options. Recovery of the system image To execute a system restore, make sure everything is in working order and follow the on-screen instructions. If your computer is unable to boot, you can use a system repair disc or recovery disk to reinstall Windows on the machine.

Then, boot from it and select System image recovery from the menu.

What you need to know about Backup and Restore(Windows 7)

It cannot be denied that the Backup and Restore feature in Windows 10 makes it simple to create a comprehensive system backup (Windows 7). However, it is also necessary to consider the negative aspects of it.

  • High disk space consumption: The size of the Windows 10 system image is entirely dependent on the amount of available space on your machine. The more space that the system has consumed, the more space that the picture will take up on the USB drive or other storage device. Furthermore, more time is required. Unsatisfactory performance: It does not support differential backup, encryption, or any of the other features. Error-prone: Thesystem image backup failederror can arise for a variety of reasons, including USB not being a viable backup destination, BIOS/UEFI, insufficient space, shadow copy storage, or the absence of a disk that can be utilized, among others. Its usage is limited in that it only allows you to restore the complete system, and you cannot restore individual files from the backup image. Furthermore, you will be unable to restore an image made on a bigger hard drive to a smaller SSD or to a different machine. The absence of maintenance: Microsoft has no longer supported this backup capability in Windows 10 since version 1709 of the operating system. Consequently, you may continue to use it to backup your system, but it may cease functioning at any time.
You might be interested:  How To Create A Windows 10 Bootable Usb

As a result, an improved Windows 10 backup program is required. When you do a search on the internet for “backup and restore software,” you will discover that there are several backup programs available. And, among all types of software, AOMEI Backupper Standard stands out as one of the most impressive.

How to create and restore (Windows 10) system image to different computer

Windows 10 image backup software AOMEI Backupper Standard is a widely used program that provides a wide range of backup and restoration solutions, including system backup, disk backup, partition backup, file backup, system restore, selective file recovery and many more. Additionally, you can benefit from the following features while putting them to use: Backup on a schedule: You may use this feature to backup your system on a regular basis, such as daily, weekly, or monthly. The option to back up just changes in the system partition can save a significant amount of disk space and backup time, allowing you to make significant savings in both space and time.

Backing up Windows 10 to a USB device, a hard disk, an external hard drive, a cloud storage, and even a network share is possible with this tool.

A simple and straightforward interface that is very easy to understand is provided by this program.

Afterwards, connect your USB flash drive and download the freeware to give it a shot. In order to restore the system to a separate computer, you must first upgrade to the professional edition of the software. Then please proceed as directed in the instructions below.

Part 1: make a system backup windows 10

Step 1: Launch AOMEI Backupper Standard and select ” Backup ” and ” System Backup ” from the drop-down menu. Then it will choose the Windows 10 operating system as well as the boot-related partitions that are necessary to boot Windows 10 by default. Step 2: Select the USB drive that is linked to your computer by clicking where the arrow points. You may also back up Windows 10 to an external hard drive, a NAS, a network location, and so on. Step number three (optional). Three useful functions may be found in the System Backup section at the bottom of the screen.

Additionally, you may select Incremental Backup from the Backup Scheme drop-down menu.

Step 4.

Part 2: Restore Windows 10 system image from USB

Assuming your machine is still bootable, launch AOMEI Backupper Standard and then choose the image by choosing “Restore” and “Select Image File,” check ” Restore this system image “, and then click ” Start Restore “. Please remember to connect the device holding the system image to your computer before proceeding. If your computer is not bootable, you must first create a bootable media, or you must use the PXE boot tool to start your computer and then restore the image under the recovery environment.

By default, the “Universal Restore” function will be enabled if you are creating a system image of Windows 10 for another computer or if you wish to restore the system to a different machine.

If you do not wish to upgrade, you will not be prompted.

Another backup software to create Windows 10 system image

Aside from the program mentioned above, you may still utilize one key recovery software to create a system backup on Windows 10. This software is called AOMEI OneKey Recovery. Besides Windows 10, it also supports other Windows versions, including Windows 11/8/7/XP/Vista and Windows Server 2003/2008(R2)/2016(R2)/2019/2022 and Windows Server 2003/2008(R2). System backups may be performed to the AOMEI OneKey recovery partition or to an other place, such as an external hard drive, with this tool.

  • Additionally, the recovery procedure may be initiated quickly and conveniently using the boot menu and fast key (F11 or A).
  • Take a look at the demo edition of AOMEI OneKey Recovery to see whether it meets your needs before purchasing the full version.
  • In addition, you must connect the USB flash drive and ensure that it is recognized by the computer.
  • 2.
  • Notes: If you wish to change the compression level or the password for the backup image, select Backup Options from the drop-down menu at the bottom of the screen.
  • Because it is significantly safer.
  • Select the USB flash drive that was previously attached to the computer by clicking Browse.

4. Verify that all of the information is correct, and then click Start Backup. The procedure will enter a reboot mode after a while. Please be patient and do not interrupt the process.

Restore from system image backup inWindows 10

Connect the USB flash drive containing the system image to your computer using a USB cable. Then, run this program, pick OneKey System Recovery from the drop-down menu, select Restore system by selecting a system image file from the drop-down menu, and then clickBrowset to select the image file from the USB device. After that, select Next, and then Start Restore after receiving confirmation of your action. Additionally, there is a potential that your computer will not start up successfully if this occurs.

Then, using the OneKey System Recovery option, restore the system.

Summary

You may already be familiar with the process of creating a system image backup in Windows 10 or 11. Backup and Restore (Windows 7) as well as AOMEI Backupper Standard and AOMEI OneKey Recovery might all be of use to you. It is possible to utilize any or all of them to make a Windows 10 system image backup and then restore it on the current machine. AOMEI Backupper is the only tool you need if you wish to restore your system to a new machine, and it is only available to professionals. Its Universal Restore feature will install all of the drivers necessary to get Windows up and running.

How to Back Up and Restore an Image File of Windows 10

Have you ever had a Windows 10 environment that was so damaged or unreliable that it was practically impossible to use? If you ever find yourself in that situation, a particular backup tool from Microsoft may be able to save the day. System Image Backup is a feature of Windows 10 that produces a whole image file of the operating system rather than simply a selection of folders and files, as is the case with File History. This way, if Windows ever becomes damaged, crashes, or just ceases to function, you may restore it to its original state by restoring the full image to your computer.

The sole disadvantage is that you cannot recover individual files from a System Image Backup; instead, you can only restore the complete image from a System Image Backup.

Before you begin, you’ll need to create an external source on which to store your picture file so that you may access it later.

Let’s get this party started.

Set Up Backup

In Windows 10, go to SettingsUpdateSecurityBackupBackup and Restore to perform a backup and restore (Windows 7). Yes, it specifies Windows 7, but don’t be concerned—the backup portion of this tool is fully functional with Windows10. In the Backup and Restore (Windows 7) box, choose the link in the upper-left corner that reads “Backup and Restore (Windows 7).” Make a copy of your system. Windows searches for a backup destination on a hard disk or USB drive, a DVD, or a network location before starting the backup process.

If you want to put the image on an external disk, make sure it’s formatted using the NTFS file system first before proceeding.

Select Next from the drop-down menu. Check the boxes next to the sections or partitions of your hard drive that will be included in the picture file, then click the Start Backup button. Windows is now in charge of creating the picture file.

Create a System Repair Disc

You will then want to build a system repair disc that you may use in the event that Windows is unable to start up on its own in the future. This will necessitate the use of a CD or DVD drive. If your computer does not already have a DVD drive, you can purchase and attach an external DVD drive. Insert a CD or DVD into your computer’s optical drive. Using the Backup and Restore (Windows 7) window, select the Create a system repair disc option in the upper left-hand corner of the window. Once you’ve confirmed that your DVD drive is visible, click on theCreate discbutton.

Recommended by Our Editors

Assume for a moment that you find yourself in a bind one day due to Windows’ misbehavior. It’s possible that the only option left is to restore it from the picture file. Check to see if your backup media is accessible. Assuming your computer is still bootable, start it up. In Windows 10, go to SettingsUpdateSecurityRecovery to update your security and recovery settings. On the right-hand side of the screen, under the Advanced starting area, click theRestart nowbutton. When the Choose an optionwindow appears, select TroubleshootAdvanced OptionsSystem Image Recovery from the drop-down menu.

If Windows fails to boot, try restarting your computer with the system repair disc in the drive.

Subscribe to the TipsTricks/strong> newsletter for expert advice on how to get the most out of your technology., first published at: 2021-09-30T21:23:24.000000Z, published at: 2021-09-30T21:23:24.000000Z, last published at: 2021-09-30T21:23:13.000000Z, created at:null, updated at: 2021-09-30T21:23:24.000000Z

Like What You’re Reading?

Sign up for theTipsTricksnewsletter to receive professional tips on how to make the most of your technology. This newsletter may include advertisements, special offers, or affiliate connections to third-party websites. By subscribing to a newsletter, you are indicating your acceptance of our Terms of Service and Privacy Policy. You have the option of unsubscribing from the newsletters at any point.

Create a Windows 10 System Image Backup

Windows 10 is undoubtedly the most reliable and useful operating system Microsoft has launched since Windows 7 in terms of stability and usability. However, this does not rule out the possibility of experiencing major problems in the future. Each and every few months, I make it a point to produce a complete system image of my Windows 10 computer. You may restore the complete operating system to the same hard drive or a new one after creating a system image, which will contain all of your installed applications, settings, and other information.

Windows 10 has a new capability called Reset this PC, but it isn’t quite as flexible as a system image backup in terms of functionality.

Furthermore, this is based on the assumption that the existing hard disk is still operational.

It’s game over if the drive dies fully since you won’t be able to utilize the Reset this PC option if the drive fails altogether. A whole system image that you can restore regardless of whether Windows or your hard disk is in good working order is always a handy alternative to have on hand.

Create Windows 10 System Image

There are several reasons why individuals choose to utilize third-party software for this purpose, and it is totally reasonable. As a matter of fact, I’ve produced an article on five free disk imaging applications that are really effective. These third-party tools often provide a greater number of options than the built-in Windows utility. I personally make numerous system images using a variety of methods since I have discovered that difficulties might develop for a variety of reasons while attempting to restore a backup from a previous backup.

To begin, go to the Control Panel in Windows 10 and click on Start.

Select “Backup and Restore” from the drop-down menu (Windows 7).

There are two approaches you might use in order to create a backup in this case.

to the far right of the screen (which is not visible in the image), which will generate a system image and run a scheduled backup of key data on your machine I recommend that you use theSet up backupoption since it will allow you to restore individual files in the event of an accidently deleted file.

  • In this case, backing up to a separate partition on the same hard disk is completely unnecessary.
  • I only do a system image because all of my stuff are already on the cloud, so it really doesn’t matter to me.
  • It is possible to save the data on three different types of media: a hard disk, one or more DVDs, or a network site.
  • Following that, you’ll need to decide which disks you wish to back up.
  • You may add as many extra drives as you like if you want.
  • The backup will be started when you have seen the summary and clicked on the Start Backup button.
  • Once the backup has been completed, you will be prompted to choose whether or not to generate a system recovery disc.
  • While it is possible to build it afterwards, doing so involves taking a risk.
  • If you go to the backup location, you will see a folder named WindowsImageBackup, which is what you are looking for.

System-owned, it cannot be accessed or read by any user, not even the Administrator, because it is owned by the system. Keep in mind that, now that you have one backup of your system, you should build another one using a separate tool simply to be cautious. Enjoy!

How to Create a System Image Backup in Windows 7, 8, or 10

The built-in backup solutions included with Windows are rather capable. Examine how to build an image of your computer’s hard drive without relying on a third-party backup program for assistance.

  1. Start by launching the System Backup Image Tool. Navigate to the Control Panel in Windows 10. Backing up and restoring data (Windows 7) Make a system image of your computer. Select the location in which you wish to save the backup image
  2. Select the drives that will be backed up
  3. Start the backup process. It is possible to build a system repair disc that may be used to restart your computer and restore the contents of a backup image.

The basic function of backup tools, such as CrashPlanorWindows’ built-in File History feature, is to copy your data to a new location on your computer. A system image backup, on the other hand, is similar to taking a complete picture of a hard drive’s contents. The benefit of creating a system image is that if your hard drive fails, you can replace it with a new one, restore the image, and return your system to the state it was in when the picture was taken. There is no need to reinstall Windows or any of your applications.

You might be interested:  How To Play Fallout 3 On Windows 10

Your whole Windows installation is being backed up, and because Windows is configured especially for your hardware, it simply will not operate in another PC as-is when the image is restored.

Image backups, on the other hand, can be quite useful even when this is taken into consideration.

Consider the fact that both systems provide incremental backups, password secured images, and the ability to explore backups for specific files.

Step One: Open System Image Backup

It is different in Windows 7 than it is in Windows 8 and 10, so we’ll show you how to locate the System Image Backup tool in all three versions, and then explain how to generate and utilize a system image in all three versions.

Open System Image Backup in Windows 10

In Windows 10, go to Start, type “backup,” and then choose the appropriate option from the list. Create a system image by clicking the “Create a system image” link in the “Backup and Restore (Windows 7)” box.

Open System Image Backup in Windows 8

Click Start, type “backup,” and then choose the appropriate entry in Windows 10. Create a system image by selecting the “Create a system image” link from the “Backup and Restore (Windows 7)” box.

Open System Image Backup in Windows 7

Start by pressing the Start button, then clicking the arrow to the right of the “Getting Started” box, followed by the option to “Back up your files.” In the “Backup and Restore” box, select “Create a system image” from the drop-down menu.

Step Two: Create a System Image Backup

Creating a system image is the same process whether you’re using Windows 7, 8, or 10. Once you’ve launched the system image tool, the procedures are the same. When you initially use the application, it will do a search for external disks on your computer. After that, you may choose where you wish to store the picture. It may be saved to an external disk, a number of DVDs, or a networked storage place. Click “Next” after selecting the location where you wish to keep your backup. At the moment, the backup utility simply backs up the system disk.

In most cases, we want to generate distinct image backups for each disc in our system.

If you see something that doesn’t look quite right, you may always go back and make improvements.

As the tool develops the image, a progress bar will appear on your screen.

Backup is being performed on a hard disk that contains about 319 GB of data. When we backed up to an external hard drive that was linked to our PC through USB, it took around 2.5 hours. The amount of time it takes can vary based on your computer and the sort of storage to which you’re backing up.

Step Three: Create a System Repair Disc

COMPANION ARTICLE:How to Create and Use a Recovery Drive or System Repair Disc in Windows 8 or 10 When the backup is complete, Windows provides you with the option to generate a system repair disc for your computer. If you ever need to replace your hard drive and are unable to start Windows, you may use this CD to boot your computer and restore from your image backup. We strongly advise you to proceed with the disc creation and labeling, as well as storing it in a secure area. You must first select the disc-creation drive that you will be using and then click the “Create Disc” button.

It’s better to create an image backup when you won’t need your computer for a few hours—or even overnight—because it can take a long time.

Easiest way to image and deploy customized Windows 10 on different hardware

Windows imaging has me completely befuddled and bewildered. I’ve begun a new IT job, and a significant portion of my time will be spent configuring systems for new staff. Approximately 110 computers and laptops running Windows 10 Pro are in use at the organization, all of which are running the same set of programs. A lot of our hosted software, including as SalesForce, Desk, and Google G Suite, is also used at the workplace, therefore I’d enjoy the ability to alter a picture to include Chrome bookmarks and desktop icons, along with printers and other useful items.

  1. All of their work is done in a Windows workgroup since the vast majority of their job is done utilizing hosted applications and the internet.
  2. Additionally, some of the systems have different hardware, thus the picture should be able to accommodate for that as well.
  3. What I’m looking for is a low-cost third-party solution, or if anyone has any personal experience or recommendations that would make this process more straightforward than going through the sysprep way.
  4. chadchristian3 replied to Evan’s post with: “Hi Evan, Thank you very much!
  5. Do you recall if you tested it with actual machines or virtual ones when you initially started doing it?
  6. Is there anything else you recall about this approach that you think could be useful to me as I try and error and test it out here?
  7. Thank you very much for your help.

In the case of virtual machines, I created the golden image, performed sysprep, and then created clones of the golden image VM.

I followed the TechNet instructions, and suddenly it started working.

I discovered that using /shutdown rather than /reboot is more convenient since it allows me to boot the system to the WinPE flash drive on my terms rather than having to try to timing the boot menu during the reboot.

You can save it straight to another flash drive, however writing the image to a flash drive directly takes longer than saving it to another flash drive.

The C: drive of the golden image is commonly assigned the drive letter WinPe, which stands for Windows PE.

I use the command dism /capture-image /imagefile:z:install.wim /capture-image for DISM.

Compression reduces the size of the picture file, but it also increases the time it takes to capture and distribute the image.

This was correctly identified by 88 percent of IT professionals.

34 Replies

Snufykat This individual has been confirmed as a professional. Verify your account in order for your IT colleagues to recognize you as a professional. At 15:26 UTC on February 24, 2017, It is necessary to have a Microsoft volume license in order to perform this lawfully. One license per operating system, for example, one for Windows 10 and another for Windows 7. Here is a step-by-step instruction. Microsoft’s official brand representative You may upgrade your Windows 10 Pro devices to Windows 10 Enterprise E3/E5 using Azure Active Directory (AAD) if you have Windows 10 Enterprise E3/E5 through the Cloud Solution Provider (CSP) agreement.

  1. More information may be found here.
  2. If you’re having trouble deploying, there are how-and to’s a large number of users who have deployed using MDT – so there may be assistance available right here in SW if you need it.
  3. One license per operating system, for example, one for Windows 10 and another for Windows 7.
  4. We have the permits for large quantities.
  5. Microsoft’s official brand representative Snufykat wrote:You’ll need a Microsoft volume license in order to accomplish this legally in the United States.
  6. Here is a step-by-step instruction.
  7. The rights to reimagine Windows 10 and the process of deploying it are discussed.

You may use Azure Active Directory to update your Windows 10 Pro devices to Windows 10 Enterprise E3/E5 with Windows 10 Enterprise E3/E5 through the Cloud Solution Provider (CSP) agreement, according to Chris (Microsoft).

More information may be found here.

If you’re having trouble deploying, there are how-and to’s a large number of users who have deployed using MDT – so there may be assistance available right here in SW if you need it.

That sounds great, however it could be a little too ambitious for us at the moment.

In the meanwhile, if I could at the very least photograph new systems by hand locally, I would have the time to look into a more complex imaging infrastructure later on.

One license per operating system, for example, one for Windows 10 and another for Windows 7.

We have the permits for large quantities.

What exactly is it that you’re having trouble with?

This is how it looks: Using the Microsoft Deployment Toolkit, can you deploy Windows 10?

Hello, Chris.

IT is the Big Boss.

Verify your account in order for your IT colleagues to recognize you as a professional.

Without the use of server-based technologies, such as WDS, managing and supporting such a large number of computers becomes incredibly challenging.

Download and install the Windows ADK (which is a free download): 2.Install WinPE on a CD or a tiny flash device and boot from it.

4.Compile and run sysprep to generalize your system.

5.Boot the golden image machine to WinPE.

7.Get another USB flash drive (at least 8 GB in capacity) and use Disk Part to format it and make the USB “active” as a boot device.

9.Replace the SourceInstall.wim file with your custom image that you captured with DISM.

10 Boot another system to the “active” USB drive that you created.

Brand Representative forMicrosoftchadchristian3 wrote:Hi, Chris.

Have you looked at usingWindows ICDusing Windows ADK?

The Windows ICD in the ADK seems to be more geared toward generic deployments with standard application packages, I assume like.msi files for things like Office, Acrobat, etc.

Evan7191 wrote:Also, for 100+ users and 100+ devices, a domain probably would help you with administration.

They already spend A LOT on SalesForce, Desk, G Suite, Office 365 and other software licensing.

Maybe at some point down the road, but for now it’s not an option.

1607) out of the image, because I got some weird behavior from sysprep when the upgrades were installed first.

Evan7191 wrote:Here is the workflow that I have used in the past: 1.

3.Construct your golden image machine by installing the fundamental operating system as well as the applications that you choose.

This will make it hardware independent, allowing you to use the same image across a variety of different models and makes.

6.Use DISM to capture the offline image.

8.Copy the contents of a Windows installation DVD to the “active” USB flash drive.

The image must be named Install.wim for this to work.

Windows Setup will install your image.

The procedure described above is the one I’ve been attempting to implement at work, but have yet to be effective.

I’ve been attempting to test it out using VMs in VirtualBox because it’s often much simpler to sandbox in VMs, but I’ve been running into problems at various points along the route, the most recent of which being issues with the VMs starting from USB devices.

Thanks for your time.

If you want a 3rd party solution, check out FOG server or CloneZilla.

chadchristian3 replied to Evan’s post with: “Hi Evan, Thank you very much!

Do you recall if you tested it with actual machines or virtual ones when you initially started doing it?

Is there anything else you recall about this approach that you think could be useful to me as I try and error and test it out here?

Thank you very much for your help.

In the case of virtual machines, I created the golden image, performed sysprep, and then created clones of the golden image VM.

I followed the TechNet instructions, and suddenly it started working.

I discovered that using /shutdown rather than /reboot is more convenient since it allows me to boot the system to the WinPE flash drive on my terms rather than having to try to timing the boot menu during the reboot.

You can save it straight to another flash drive, however writing the image to a flash drive directly takes longer than saving it to another flash drive.

The C: drive of the golden image is commonly assigned the drive letter WinPe, which stands for Windows PE.

I use the command dism /capture-image /imagefile:z:install.wim /capture-image for DISM.

Compression reduces the size of the picture file, but it also increases the time it takes to capture and distribute the image.

In my experience, adding a setting to the golden image before sysprep usually was easier than configuring it in the answer file so that it gets added during or after the image install.

Seriously, thanks for the help Evan.

I’ll give it a try and report back.

Verify your account in order for your IT colleagues to recognize you as a professional. Feb 24, 2017 at 16:33 UTC Brand Representative forSmartDeploy Be sure to look atSmartDeployas you’re evaluating your options. A few things about SmartDeploy:

  • It is possible to deploy a single golden image to any hardware make or model. Creating your reference machine in a virtual environment is the first step, and then we’ll take care of the rest, using model-specific driver packages developed by our professionals. You may deploy through USB, which eliminates the requirement for a network configuration. We take the complex work of computer imaging and break it down into easy step-by-step wizards that make this task much easier to do and understand. Best practices are built in, and we take care of things like Sysprep, computer name, and so on automatically for you. Our customer service crew is outstanding. Because we are based in Seattle, we don’t have phone trees or long wait periods for responses. We aim to handle any concerns as quickly as possible and get you back on your feet as soon as possible

I invite you to view our on-demand demoor walk through the process using ourquick start tutorials, which are available at no additional charge. Then take advantage of our 15-day fully functional trial to see how it works for you. Please let me know if I can assist you with any queries you may have along the road. I suddenly recalled something else. Installing Office 365 applications in the image requires the use of the Office deployment tool, which generates a configuration.xml file. If you want to install the Office applications in the image, you must follow a specific procedure.

It will install Office 365 without the need to purchase a license.

Thank you very much, chadchristian3!

This looks fantastic and fills in some of the gaps in what I’ve been attempting to do thus far.

If you have any particular questions concerning the procedure, please feel free to write me a private message on Facebook.

Salesforce was listed as a tool that you utilize.

Previously, I had a single image in which I had installed the Salesforce plugin with the “For Everyone” option, and it did not function once the picture had been deployed.

As a substitute, I created an image that did not include the Salesforce plugin, deployed that image, and then installed the Salesforce plugin on the system that had been deployed.

Comments on this issue have been disabled by an administrator, and they will no longer be accepted.

Leave a Comment

Your email address will not be published. Required fields are marked *