How To Make Your Laptop Faster Windows 10

Contents

7 easy ways to speed up your Windows 10 computer, from disabling unneeded effects to upgrading your hardware

  • Note Early versions of Windows and MS-DOS are covered by these instructions. The mem command is no longer supported if you are using a Windows command line to perform it. Enter the command memand at the MS-DOS prompt. Note When typing mem, MS-DOS 6.2 will not accept or acknowledge any memory that is more than 64 megabytes (MB). Ourmem commandpage has further information about the mem command.

Sometimes people are perplexed as to how it was possible for the guidancecomputer in Apollo 11 – which had less memory than the cheapest Windows 10PC in use today – to make it all the way to the moon. This is because it did not spend any computing resources on a flashy UI or multi-tasking capabilities. It is possible to squeeze a bit more performance out of your ownWindows 10computer by making it a little more minimalist, similar to the original Apollo 11computer. You may also simply upgrade it to a newer model.

Check out the products mentioned in thisarticle:

Installing a solid-state disk in your computer will significantly improve its performance. WDF is the source of this information. Finally, increasing the amount of RAM and storage available on your computer may significantly increase its speed. For computers with traditional hard drives, such as those with spinning metal platters, upgrading to a solid-state drive (SSD) can make a significant difference in performance and reliability. Windows will boot many times faster and programs will start in a fraction of the time when using an SSD, which has the same amount of memory as a USB flash drive (but it will be much, much faster).

Additionally, if you use your computer for a lot of resource-intensive applications, such as picture editing, video creation, or gaming, increasing the amount of memory available might be quite beneficial as well.

Related coverage fromTechReference:

Thinkstock Do you want Windows 10 to operate more quickly? We’ve enlisted assistance. You can put these suggestions into action in a matter of minutes, and your machine will be faster and less prone to performance and system difficulties as a result.

1.Change your power settings

It is possible that you are slowing down your computer by utilizing Windows 10’s “Power Saver” strategy. In order to preserve energy, this strategy decreases the performance of your computer. (Even desktop computers are often equipped with a “Power Saver” mode.) Changing your power plan from “Power saving” to “High performance” or “Balanced” can provide you with an immediate improvement in overall performance. This may be accomplished by using the Control Panel application and then selectingHardware and SoundPower Options.

There may be more plans available depending on your vehicle’s make and model, including those that are branded by the manufacturer.) To access the “High performance” setting, select “Show additional plans” from the drop-down menu that appears.

IDG (Click on the image to see it in greater detail.) You may alter your power setting by simply selecting it from the Control Panel and then exiting it.

Desktop users have no need to select “Power saving,” and even laptop users should consider the “Balanced” option when the computer is not attached to a power source — and the “High performance” option when the computer is connected to a power source.

2. Disable programs that run on startup

You may be experiencing slow performance on your Windows 10 computer because you have too many apps running in the background – programs that you rarely or never use. If you can prevent them from operating, your computer will operate more smoothly. Begin by activating the Task Manager, which is as follows: Select Task Manager from the context menu by pressing Ctrl-Shift-Esc, right-clicking the lower-right corner of your screen and selecting it, or typing task manager into the Windows 10 search box and pressing Enter If the Task Manager runs as a small application with no tabs, select “More details” from the drop-down menu at the bottom of your screen.

  • The Task Manager will then display in all of its tabbed magnificence, as shown in the screenshot below.
  • Select the Startup tab from the drop-down menu.
  • There is information about each application, including its name, publisher, whether it is enabled to run on startup, and its “Startup effect,” which is a measure of how much it slows down Windows 10 when the system first starts up, included in the list.
  • However, this does not completely shut down the software; rather, it merely prevents it from running at startup; you may always execute the application once it has been launched.
  • (Click on the image to see it in greater detail.) Many of the apps and services that launch automatically upon startup, including as OneDrive and Evernote Clipper, may be known to you.
  • (If there is anyone who knows what “bzbui.exe” is, please raise your hand immediately.

Properties can be accessed by right-clicking an item and selecting “Properties.” This will reveal more information about the item, including its location on your hard disk, whether it has a digital signature and other details such as its version number and file size, as well as when it was last modified.

That launches File Explorer and directs it to the folder in which the file is stored, which may provide you with even more hint as to the program’s intended use.

Bing will then begin, displaying connections to websites that provide information about the program or service in question.

and search for the file’s name there.

Following your selection of all of the apps that you wish to have disabled at startup, the next time you restart your computer, the system will be far less concerned with superfluous programs and will perform significantly better.

3. Use ReadyBoost to speed up disk caching

Windows 10 constantly stores cached data on your hard disk, and then when it requires the data, it retrieves it from the cached data location. The amount of time it takes to retrieve cached data is dependent on the performance of your hard drive. If you have a regular hard disk rather than an SSD, there is a method that you can do to speed up your cache: utilize Windows’ ReadyBoost option to accelerate your cache. It instructs Windows to save data on a USB flash drive, which is significantly quicker than a hard disk.

  1. To begin, insert a USB flash drive into one of the USB ports on your computer.
  2. The greater the speed of your flash drive, the greater the speed boost you should get.
  3. After you’ve inserted the disk into the drive, open File Explorer and select “This Computer.” Look for the flash drive on your computer.
  4. Right-click it and select Properties.
  5. Microsoft ReadyBoost may be activated from this screen in order to speed up your PC.
  6. Leave the cache size at its default value, or alter it if you like.

(Please keep in mind that if you see the notice “This device cannot be used for ReadyBoost” when you select the ReadyBoost tab, it implies that your flash drive does not satisfy ReadyBoost’s minimum performance specifications, and you will need to install a new one.) As you use your computer, ReadyBoost will begin to load the cache with data, resulting in an increase in disk activity, which you could notice.

Depending on how frequently you use your computer, it may take several days for your cache to fill and provide the most possible improvement in speed.

Please keep in mind that if you have an SSD, ReadyBoost will not provide any additional speed and may potentially degrade performance.

4. Shut off Windows tips and tricks

In the background, as you work on your Windows 10 computer, Windows keeps an eye on what you’re doing and provides suggestions for things you might want to do with the operating system. In my personal experience, I’ve found these “advice” to be seldom, if ever, beneficial. The fact that Windows is continuously looking over my shoulder has a negative impact on my privacy, which is something I dislike. Having Windows observe what you’re doing and provide suggestions might potentially cause your PC to function more slowly.

To do so, start by pressing the Start button, selecting the Settings icon, and then selecting SystemNotificationsactions from the drop-down menu.

(Click on the image to see it in greater detail.) That should take care of the problem.

5. Stop OneDrive from syncing

Files are synchronized and up to date across all of your PCs thanks to Microsoft’s cloud-based OneDrive file storage, which is incorporated into Windows 10. It’s also a handy backup tool, which ensures that even if your computer or its hard drive crashes, you’ll still have all of your contents intact and ready to be restored. If you want to test if turning off OneDrive synchronization temporarily improves system speed, follow these instructions. (Click on the image to see it in greater detail.) It accomplishes this by continuously synchronizing data between your PC and cloud storage – a process that can significantly slow down your PC.

  1. You’ll want to be sure that it isn’t truly slowing down your computer before you turn it off permanently.
  2. Then, on the popup screen that displays, pick “Pause synchronization” and enter the length of time you want it to be halted (either 2 hours, 8 hours, or 24 hours) in the drop-down menu.
  3. If this is the case, and you decide that you do, in fact, want to turn off syncing, right-click the OneDrive icon and selectSettingsAccount from the popup menu.
  4. While this will allow you to continue to store files to your local OneDrive folder, they will no longer sync with the cloud.
  5. Microsoft’s “Fix OneDrive sync difficulties” page provides detailed instructions on how to accomplish this task.

6. Use OneDrive Files on-Demand

Some users may not want to disable OneDrive syncing since doing so negates the point of the service, which is to ensure that you always have the most up-to-date files on whichever device you are using. Furthermore, it would imply that you would no longer be able to utilize OneDrive as a safe means to back up files. There is, however, a method to have the best of both worlds: Maintaining a minimum level of synchronization and only performing it when absolutely essential is possible. You’ll notice a significant improvement in performance while still getting the most out of OneDrive.

  1. You have the option of keeping only a few selected files on your computer while still having access to all of your other OneDrive files stored on a cloud server.
  2. You should notice a performance improvement as a result of having less files on your PC sync.
  3. On the dialog box that displays, select the Settings tab.
  4. Click on the OneDrive icon and then pick Open Folder from the drop-down menu.
  5. When you right-click a folder containing files that you wish to be saved exclusively in the cloud and not on your computer, you may choose “Free up space.” The files in that folder will be deleted from your computer’s hard drive, but they will remain in OneDrive in the cloud.
  6. Microsoft Turn on OneDrive Files on-Demand by selecting this option from the drop-down menu.

Please keep in mind that OneDrive Files on-Demand is only accessible on Windows versions 1709 and above.

7. Turn off search indexing

Some users may not want to disable OneDrive syncing since doing so negates the point of the service, which is to ensure that you always have the most recent versions of your files on whichever device you are using. You’d also lose access to the OneDrive cloud storage service, which is a great method to keep data safe. The good news is that there is a way to have the best of both worlds at the same time: Maintaining a minimum level of synchronization and only performing it when absolutely essential can save you time and frustration.

  • The OneDrive Files on-Demand functionality of Windows is used to do this.
  • When you wish to utilize one of those online files, you just open it immediately from the cloud storage service.
  • In the right-side Taskbar, pick Settings from the context menu of the OneDrive icon.
  • Files On-Demand should be selected from the drop-down selection.
  • When you open OneDrive, it shows in a File Manager window.
  • It will be deleted from your hard drive, but the files will still be stored in OneDrive, which is a service provided by Microsoft.
  • To alter the choices for a particular folder, simply right-click the folder and select what you want to happen.
  • To return to the OneDrive settings dialog box and uncheck the box next to Files on-Demand, go back to the OneDrive settings dialog box and uncheck the box next to Files on-Demand again.
You might be interested:  How To Restore Windows 10 To Factory

8. Clean out your hard disk

If you have a bloated hard disk that is stuffed with things that you don’t need, it is possible that your computer could slow down. Cleaning it out might provide you an advantage in terms of speed. Storage Sense, a built-in utility in Windows 10 that is surprisingly effective for this purpose, may be found here. Change the toggle at the top of the screen from Off to On by going toSettingsSystemStorageand clicking on it. Whenever you do this, Windows keeps track of all the garbage files on your computer and deletes those that are no longer needed.

  • You may adjust the way Storage Sense operates, and you can even utilize it to free up even more space than would otherwise be available.
  • You may modify the frequency with which Storage Sense deletes files from the screen that shows (every day, every week, every month or when your storage space gets low).
  • Alternatively, you may have Storage Sense automatically move files from your PC to the cloud in Microsoft’s OneDrive cloud storage if they haven’t been opened for a specified period of time (every day, or every 14 days, 30 days or 60 days).
  • (Click on the image to see it in greater detail.) You may also remove previous versions of Windows that may be taking up valuable disk space.

Following the upgrade, Storage Sense will automatically remove any previous versions of Windows ten days after they were installed. Please keep in mind that once you do this, you will not be able to revert to a previous version of Windows.

9. Clean out your Registry

Under the hood of Windows, the Registry keeps track of and regulates virtually every aspect of the way the operating system operates and appears. Among other things, it contains information on where your programs are located, which DLLs they use and share, which file types should be opened by which program, and almost everything else. The Registry, on the other hand, is a jumbled mess. It’s not always the case that when you uninstall an application, the settings associated with that program are removed from the Registry.

  • As a result, the system may become more sluggish.
  • It’s just not doable.
  • There are a plethora of options accessible, some of which are free and others which are not.
  • Before you use Auslogics or any other Registry Cleaner, you should make a backup of your Registry so that you can restore it if something goes wrong with the cleaning.
  • To create a backup of your own Registry, typeregedit.extin the search box and hit the Enter key.
  • Export may be found under the File menu.
  • Of restore the Registry, open the Registry editor and select Import from the File menu, followed by the path to the file you saved earlier in this process.
  • If you wish to clean up certain types of Registry problems, you may choose them from the drop-down menu on the left-hand side of the screen — for example, File Associations, Internet, or Fonts.
  • IDGAuslogics Registry Cleaner is a program that examines your Windows Registry for and repairs errors.
  • If you want to do this, click “Scan Now” and then pick Scan from the drop-down selection that appears.
  • If you pick “Scan and Repair” instead, the program does the necessary repairs without your involvement.

It categorizes the faults according to their severity in order to assist you in deciding which ones to rectify. When you’ve made your option, click Repair. Make sure that “Back Up Changes” is selected so that you can simply restore the Registry if something goes wrong.

10 easy ways to speed up Windows 10

A key component of Windows’ operation and appearance is the Registry, which monitors and controls virtually every aspect of its operation and appearance. This contains information about where your applications are located, which DLLs they use and share, which file types should be opened by which program, and just about everything else imaginable. The Registry, on the other hand, is a jumble of a system. It’s not always the case that when you remove an application, the Registry entries associated with that program are cleared.

  • System slowdowns may result as a result of this.
  • I am unable to do so.
  • You may find a plethora of resources online, some free and some not.
  • Make a backup of your Registry before running Auslogics or any other Registry Cleaner so that you can restore it if something goes wrong.
  • Enter the command regedit.ext in the search box and press Enter to create a backup of your own Registry data.
  • Alternatively, you may export from the File menu.
  • Of restore the Registry, open the Registry editor and select Import from the File menu, followed by the path to the file you saved earlier in the process.
  • Selecting the kind of Registry problems you wish to clear up is done on the left-hand side of the screen; for example, File Associations, Internet, and Fonts are all options.
  • When you run IDGAuslogics Registry Cleaner, it will search through your Windows Registry looking for and fixing errors.
  • In the following step, instruct it to scan the Registry for issues.
  • In order to do so, you must first look into the Registry issues that have been discovered.

It provides a severity rating for each issue to assist you in deciding which ones to correct. As soon as you’ve made your option, click Repair. Be careful to check the “Back Up Changes” box so that you can immediately restore the Registry if anything goes wrong.

1. Go opaque

Windows 10’s new Start menu is slick and transparent, but that openness will come at a (slight) cost in terms of system resources. You may regain those resources by disabling transparency in the Start menu, taskbar, and action center, as seen below: Open theSettingsmenu and selectPersonalizationColorsfrom the drop-down menu. Transparent Start, taskbar, and action center buttons are available. CNET photo by Sarah Jacobsson Purewal

2. No special effects

Making the Start menu, taskbar, and activity center translucent is one thing, but Windows 10 also comes with a slew of other slick, built-in special effects that are worth exploring. In order to go to bare-bones with your special effects, right-click the Startbutton and selectSystem. CNET photo by Sarah Jacobsson Purewal To access the System Properties menu, select Advanced system settings from the drop-down menu. Settings may be found on the Advancedtab, under the Performance section. CNET photo by Sarah Jacobsson Purewal The Performance Options menu will be displayed as a result of this action.

When you’re ready, click OK to have your changes take effect immediately.

3. Disable Startup programs

If your computer is taking a long time to boot up – even after you’ve set Fast Startup and everything else – it’s possible that you have too many apps running at the same time when you switch on your computer. To correct this, right-click on the Startbutton and selectTask Manager from the context menu. Click theStartuptab (or More information if you don’t see the Startup tab) and scroll through the list of apps that are launched when your computer starts up. If you come across an application that doesn’t belong on your computer, just right-click it and selectDisable.

CNET photo by Sarah Jacobsson Purewal

4. Find (and fix) the problem

Windows 10 includes a built-in performance troubleshooter that may assist you in identifying and resolving any issues that are slowing down your computer’s performance. To access the troubleshooter, right-click on the Startbutton and select Control Panel from the context menu. Security and maintenance are classified as follows: Troubleshoot common computer problems may be found at the top of the page. Then, under System and Security, select Run maintenance tasks from the list. CNET photo by Sarah Jacobsson Purewal

5. Reduce the Boot Menu Time-out

After a specific period of time has elapsed after your computer was turned on, the boot menu is presented before the operating system is loaded. This offers you the opportunity to do actions such as starting Windows in Safe Mode. By altering the boot menu time-out, which is set to 30 seconds by default, you can save a few seconds on your startup time and improve overall performance. CNET photo by Sarah Jacobsson Purewal To do so, right-click on the Startbutton and select Control Panel from the context menu.

Navigate to SystemAdvanced system settings and then to Startup and Recovery, where you will find the Setting button. CNET photo by Sarah Jacobsson Purewal Changing the value from 30 seconds to 10 seconds next to the Time to show a list of operating systems: field and clicking OK is recommended.

6. No tipping

Windows 10 may occasionally provide you with recommendations on how to get the most out of the operating system in an attempt to be helpful. In order to accomplish this, it scans your computer, which has the potential to have a little impact on performance. For further information, go to StartSettingsSystemNotificationsaction and toggle off the relevant option. As you go across Windows, you’ll receive tips, tactics, and ideas. Matt Elliott is a writer and a musician who lives in the United Kingdom.

7. Run Disk Cleanup

Windows 10 may occasionally provide you with recommendations on how to get the most out of the operating system in an effort to be helpful. Because it has to accomplish this, it scans your computer, which has the potential to have a little negative impact on performance. For further information, go to StartSettingsSystemNotificationsactions and toggle off the relevant option. As you work with Windows, you’ll receive tips, methods, and ideas. Matt Elliott is a writer and a musician who lives in New York City with his family.

8. Eradicate bloatware

If your computer arrived with preloaded applications that you don’t want or need, uninstall them. The same may be said for any programs you’ve downloaded and afterwards discovered to be of little or no value. Uninstall a program may be found under theProgramsheader of the Control Panel, which can be accessed by selecting it from the Startmenu. Continue to go through the list, removing the apps you no longer require by selecting them and clicking Uninstallat the top of the list.

9. Power plan

Make certain that you are not utilizing a Power Saver strategy if you do not require it. Occasionally, even desktop computers will include a power-saving mode, which is useless unless you are attempting to extend the life of your computer’s battery. You may find out the power plan you are presently using by opening theControl Paneland going toHardware and SoundPower Options. Use a High PerformanceorBalancedplan (or a plan from the PC maker that specifies that it is balanced) to get the most out of your computer’s processing power.

10. Restart your PC

Is it as simple as restarting your computer to increase the speed of your computer? Maybe. When you restart your computer, it clears off its memory and terminates any running programs that are consuming resources. Another thing to keep in mind is that shutting down your computer is not the same as restarting it – shutdown is influenced by Windows 10’s Fast Startup feature, which takes a snapshot of your machine and its running programs in a hiberfile for speedier boot-up. Because restart is unaffected by Fast Startup, restarting your computer is the only option to completely empty the RAM and terminate all running processes if you have Fast Startup activated.

Slow laptop? How to Make a Laptop Faster (for free)

We are a reader-supported website, and we may get a compensation if you make a purchase after clicking on one of our affiliate links. Are you looking to improve the performance of a sluggish laptop or PC? We disclose the most important, straightforward, and cost-free measures that anybody can take to accelerate a laptop running Windows 10, 8, or 7. Comply with the methods below to make your laptop run more quickly. Don’t toss away your old, sluggish computer just yet. Try these free remedies to see if they help to speed up your laptop!

  1. Even if you’re generally cautious about keeping your laptop or PC in good working order, it’s astonishing how quickly things may slow down.
  2. In reality, there are a number of actions you can do to give it a slight boost in terms of overall performance and efficiency.
  3. Here are 14 tips and tricks for speeding up a sluggish laptop or PC running Windows 10, 8, or 7 that you should know about.
  4. Because we’re using Windows 10, we’ll be utilizing the Windows 10 version for the directions and screenshots in this article.

Are you looking for a quick solution? Iolo System Mechanic is our go-to program for automatically optimizing and maintaining PC performance. It is a low-cost and very successful method of drastically improving performance. System Mechanic is one of our favorites since it does the following:

  • Real-time optimization of the CPU, RAM, and hard drive performance is achieved. Removes unnecessary files from your computer to make room for new ones. Identifies undesirable apps that cause the computer to start up slowly
  • Over 30,000 identified flaws that might cause errors or performance difficulties are tracked down and fixed
  • Windows security flaws that have been identified are patched
You might be interested:  How To Print Screen On Windows 10

Iolo has extended a discount of up to 70% to readers of Comparitech for their purchase of System Mechanic. How to make your laptop run quicker is as follows:

1. Close system tray programs

If your computer is taking a long time to boot up, it’s conceivable that you have too many apps running at the same time as Microsoft Windows. It is common for items in the system tray to start up at startup and then remain active while you are using your computer. Use the upward arrow toward the right side of your taskbar to gain access to these features and options. If there are any apps running that you don’t need, you may close them by right-clicking on them.

2. Stop programs running on startup

Other applications that automatically launch on startup, such as those that run in the system tray, might cause your computer to slow down in a similar way. Some of them, such as antivirus software, you may truly want to run, while others may be completely useless. To start the Task Manager, right-click on the taskbar and selectTask Manager, or press Ctrl-Shift-Escape on your keyboard. If you navigate to the Startup page, you’ll be able to see a list of each thing that executes on startup, as well as the impact it has.

However, keep in mind that some of these apps are required for Windows to function properly.

You should either leave it or conduct a Google search to find out additional information if you are unsure.

Keep in mind that you are not deactivating the software itself, but rather the fact that it runs on startup.

3. Update Windows, drivers, and apps

As a security precaution, you have undoubtedly heard that keeping your software up to date is a smart idea. This is correct, and it can also improve performance. When an update is ready, Windows will notify you by sending you an automated notice. All you have to do now is make sure you don’t put it off any longer. If you have any doubts about whether you have received an update, you may always double-check. Navigate to the Start menu and selectSettings or the settings icon. Then choose UpdatesSecurityWindows Updates from the drop-down menu.

Once again, this is beneficial in terms of both security and performance.

4. Delete unnecessary files

Our computers become crowded in the same way that our closets and drawers do. While you may not be able to see it, you are aware that it is present and that it may be having a detrimental affect on the performance of your computer. In particular, if you deal with a big number of huge files on a daily basis, such as high-resolution photographs, audio files, and movies, you should consider using a file sharing service. Make it a practice to delete files and folders once a week and clear the recycle bin afterward to free up space on your hard drive.

Tip: Hard disk drives (HDDs) typically operate at maximum speed until they reach around 90% of their maximum capacity.

SSDs slow down more gradually as they fill up, so it’s important to keep track of how much data is being stored on them. It is not suggested to load an SSD with more than 75 percent of its total capacity.

5. Find programs that eat up resources

If you notice that your computer is suddenly performing much slower, there is a good possibility that a certain software is to fault. One method of identifying the perpetrator is to go into your task manager and see what is consuming your resources at any given time. Task Manager may be accessed by right-clicking the taskbar and selecting it. More information about the programs that are now operating on your computer may be obtained by selecting More details. By default, it should display you theProcessstab window.

If you need to close something, consider closing the program that you are now using first.

Windows 7 is a computer operating system.

6. Adjust your power options

Windows comes with a number of pre-configured ‘power plans’ that may be customized to meet your requirements. As a default, it is set toBalanced, which takes both performance and energy usage into consideration. However, the latter is only a significant worry if you’re running on battery power or attempting to keep your electricity expenses as low as possible. As a result, you may wish to reconsider your original idea. If your computer is functioning slowly, the High performanceplan is a better choice, as its name implies.

In addition to the usual options, you have the option of creating your own customized plan.

Make a strategy for achieving your goals.

Basic choices include how long the display remains on when you are not using the computer and how long it takes before the machine goes into sleep mode, among other things.

7. Uninstall programs you don’t use

We frequently install large apps without understanding how much space they are using up on our computer’s hard drive. If you believe this to be the case, you may quickly delete any apps that you do not use anymore from your computer. In the event that you just utilize a software every now and then, but it is exceptionally enormous, it may be worth your effort to simply reinstall it each time you require it. In order to remove a software, navigate to Control PanelProgramsProgramsand Features on your computer.

Using a search engine to learn more about a certain software is a simple solution if you’re unsure about anything. A product like the appropriately called PC Decrapifier, on the other hand, can assist you in distinguishing between what is excellent and what is terrible.

8. Turn Windows features on or off

In thePrograms and Featuresscreen, you could wish to look for any Windows components that you don’t require, while you’re at it. Turn Windows features on or off by selecting Turn Windows features on or off from the menu bar. If you don’t want to turn off anything that you truly need, you’ll want to be very careful. So, once again, conducting an internet search for anything you are doubtful about is a smart idea.

9. Run a disk cleanup

Cleaning away garbage that has accumulated over time is made easier by a built-in program that comes with Windows. Click on Administrative Tools in the Control PanelSystem and SecurityAdministrative Tools section, and then selectDisk Cleanup from the drop-down menu. You may use this section to pick the sorts of files you wish to delete and then click OK. Then choose any system files you want to eliminate by clickingClean up system files and selecting them. If you prefer not to do this manually, there is software available for purchase that will assist you.

There are several more tools aimed to improve the efficiency of your computer, including the ability to clear up your browsing history, optimize settings and program processes, and defragment your hard drive (see below).

10. Defragment your hard drive

Your hard disk becomes fragmented as a result of the accumulation of files over time. Because your computer must now look for the components in various locations, it may operate more slowly as a result of the increased workload. The phrase ‘defragment’ may sound a little dramatic, but it simply refers to the process of reassembling files so that your system can function more effectively in the future. In reality, it’s something that Windows 10, 8, and 7 perform automatically on a timetable that you may select.

  1. First and first, it’s crucial to understand that this is only necessary if your computer is equipped with a standard mechanical Hard Disk Drive (HDD).
  2. If you have both, defragment only the hard drive.
  3. Click on Optimize and defragment disk under the Tools section of the Properties dialog box.
  4. It should be noted that all of the drives in the screenshot above are solid-state drives.
  5. Analysis will be grayed out for SSD devices, as seen in the image, but it will be available for hard drives, as well.
  6. A decent rule of thumb would be to keep it below five percent of total revenue.
  7. If you have a solid-state drive, you’ll discover that the option Optimize is truly accessible.

By clicking on it, the TRIM command will be executed, which will delete any data that is no longer deemed to be in use. Windows 7: Use the search box to look forDisk Defragmenter and then choose a hard drive from the list of current statuses.

11. Adjust or disable graphics and animations

Windows 10 and later editions come with an abundance of visuals, as well as animations such as fading effects and flyouts. These assist in making the program look more sleek and sophisticated, as well as contributing to a more positive overall user experience. They can, on the other side, cause your computer to run more slowly. Fortunately, changing these parameters is straightforward and should result in a little reduction in processing power. System and SecuritySystemAdvanced system settings may be found in the Control PanelSystem and SecuritySystem.

You have the option to selectAdjust for optimum performance (which will remove all visual effects) or to remove specific visual effects one at a time.

Use theVisual Effectstab in Windows 7 after searching forPerformance Information and Tools, selectingAdjust visual effects, and clicking OK.

12. Check for malware

Malware (also known as malicious software) is a general word that refers to harmful programs that have the potential to cause harm to your computer. There are many different sources for them, including email links, software downloads, and even advertisements (malvertisements). Aside from the possibility of causing irreversible harm to your system, several types of malware might cause your computer to perform more slowly than usual. Installing effective antivirus software may aid in protecting against malware as well as other dangers on a computer.

In particular, we recommend Avira’s free program, which checks for and eliminates malware and also contains tuneup tools, as well as its paid counterpart.

Norton, TotalAV, andMcAfee are three antivirus software programs that we suggest if you are prepared to pay a fee for your antivirus software.

After that, you may remove it with a malware removal product such as Malwarebytes Anti-Rootkit.

13. Disable Cortana

While the Windows 10 digital assistant, Cortana, is a convenient tool, it consumes a lot of system resources and poses a privacy danger to users’ information. Cortana used to be a simple task to uninstall, but the most recent versions make it a little more difficult. But if you’re ready to make a modification to your system’s registry, it is possible to accomplish your goal.

14. Upgrade your hardware

If you’ve exhausted all of the options listed above, it may be time to consider upgrading your hardware.

Some items you might wish to consider investing your money in are as follows:

  • Add a solid-state drive (SSD): While hard drives (HDDs) provide greater space for a lesser price, adding an SSD can significantly improve the performance of your computer. If you have an older machine, it may not have enough memory to run contemporary software efficiently. Increase the amount of RAM available: Furthermore, if you run a large number of apps at the same time, your computer may not have enough Random Access Memory (RAM) to get you through the day. Installing a new RAM module might provide you with the extra boost you require

A few more tips

There are other factors at play as well, such as your operating system’s memory use. Sluggish performance on the computer might be caused by certain computing habits, as well as by other applications and systems. Here are a few additional pointers to get you up to speed on the subject:

  • Maintain the cleanliness of your computer: Although it may seem apparent, dust and filth that has gathered on your computer might really cause it to slow down. Physically cleaning your computer on a regular basis might help it run faster and avoid overheating. Remove any browser addons that are no longer needed: As a result, it is recommended that you do regular maintenance on your computer
  • However, this is not required. Make use of a memory-preserving extension: When it comes to extensions, there are several popular choices, including Auto Tab Discard and New Tab Suspender, both of which will lower the memory footprint of open tabs
  • And Restart on a regular basis: Sometimes all you need is a new pair of shoes. Restarting your computer can allow upgrades to take effect and can also be used to shut down apps that have been stuck. When you’re taking a break, it can be a good idea to push the restart button while you’re getting something to drink. Reduce the number of apps running at the same time: In the same way that multitasking may be damaging to our productivity, running a large number of apps at the same time can slow down your computer’s performance. Develop the practice of shutting programs rather than merely minimizing them, and you should notice a difference. Installing the operating system from scratch: If you’ve exhausted all other options and are still experiencing difficulties, a final alternative may be to do a clean Windows installation.

Keeping things running smoothly

Once you’ve cleaned up your computer by putting some of the suggestions above into action, you’ll no doubt want to keep it functioning at peak performance. It’s a good idea to schedule a monthly cleansing in order to prevent becoming dissatisfied with poor performance. Make use of the information in the preceding list as a checklist, and you’ll be all prepared.

You might be interested:  How To Remove Cookies From Windows 10

12 Simple Tweaks to Speed Up Windows 10

With the advancement of PC hardware comes the advancement of software, and Windows 10 is no exception. This is especially true when it comes to the starting time: Upgrades from Windows 7 or earlier will be pleasantly pleased by how quickly your computer will be up and running again after the upgrade. After you’ve gotten your system up and running, there are several further performance aspects to consider. Even the most up-to-date and visually appealing version of Windows is not immune to slowdowns.

  • The majority of our suggestions are for methods to increase the performance of your Windows 10 system without sacrificing its aesthetic or usefulness.
  • People with older, low-power PCs who desire a performance increase but don’t care about extra niceties will find that some of the techniques near the conclusion of this article actually improve system performance at the sacrifice of visual bling.
  • Registry cleaners are not supported by Microsoft in any way, shape, or form for usage with Windows 10.
  • This may appear to be a too apparent step to mention as a distinct step in the next section.
  • Because they may also include hardware driver upgrades, your PC may perform more smoothly after installing one of them.

1. Run a Tune-Up Utility

Windows 10 is no exception to the trend of increasing speed in PC hardware and software. When it comes to start-up time, this is especially true. Upgrades from Windows 7 or earlier will be pleasantly pleased by how quickly your system will be up and running again after the update. After you’ve gotten your system up and running, there are several further performance aspects to consider. Despite the fact that Windows 10 is the most up-to-date and visually appealing version, it is nevertheless susceptible to slowdowns.

  1. For the most part, our suggestions will teach you how to increase the performance of your Windows 10 system without affecting its aesthetic or operation.
  2. People with older, low-power PCs who desire a performance increase but don’t care about extra niceties may find that some of the techniques near the conclusion of the article actually improve system performance at the sacrifice of visual bling.
  3. Using registry cleaners with Windows 10 is categorically not supported by Microsoft.
  4. Including this as a distinct step may seem overly obvious, but it is important to note.
  5. Because they may also include hardware driver upgrades, your PC may perform better after one of these.

Regardless of whether you intend to use or not use a major feature update at the time, you should still perform this action. You can defer significant feature updates under the same area of Settings.

2. Uninstall Crapware

However, even though the situation is improving, some new PCs continue to come with unwanted preloaded software that was installed by the PC manufacturer during the manufacturing process. A number of years ago, we discovered that a Lenovo PC we were testing had roughly 20 so-called assistant apps loaded, and that they would sporadically and uninvitedly come up and disrupt whatever we were doing at the time. Over the last few years, the number of preloaded, unneeded software programs has decreased.

  • Even Microsoft, however, is not without fault in this game, as seen by a few of titles from King and maybe some mixed reality software that you may or may not be interested in.
  • This will completely remove the application from your computer.
  • If you prefer, you can just put Programs into the Cortana search box located next to the Start button.
  • Other useful choices include sorting by Recent to check if there are any apps you didn’t realize you had installed; and sorting by Size to get rid of items that are too huge to be useful.
  • Unfortunately, you can only remove one piece of bloatware at a time, so plan on spending around 30 minutes or so on this endeavor if you have a lot of it.
  • Keep in mind that there are two types of programs available in Windows 10: conventional desktop applications and new Windows Store applications.
  • However, when you try to uninstall an application that is not from the Store, the Control Panel appears, where you may delete regular desktop programs.
  • Removed applications can improve speed in part because many programs load processes at boot time, using significant RAM and CPU cycles in the process.
  • More information on what to delete may be found at How to Rid a Computer of Crapware.

3. Limit Startup Processes

A lot of apps, as described in the last entry, install side processes that run every time you start your computer, and some of these processes are items you do not want running on your system all of the time. When compared to Windows 7, which required you to use the MSCONFIG software, Windows 10 (and Windows 8. x before it) provides a more convenient approach to limit what starts at startup, which is accessible through the newly redesigned Task Manager. The quickest and most convenient way to open the Task Manager is to use Ctrl-Shift-Esc.

The dialog box even includes a column that displays the impact on Startup for each option.

You may modify the status of any entry by selecting it with the right mouse button. It’s typically very simple to notice things that you don’t want to run away from. Suppose you never use iTunes; in that case, you probably don’t need iTunesHelper to be operating all of the time.

4. Clean Up Your Disk

Disk Cleanup may be found by searching for it in the Start menu. This launches the dependable Disk Cleanup application, which has been a component of Windows for multiple versions of the operating system. Disk Cleanup scans your computer for undesirable garbage, such as temporary files, offline Web sites, and installation programs, and provides an option to erase them all at the same time. In some cases, you may discover that your Recycle Bin is overflowing at the seams. However, this will normally only have a significant impact on performance if your drive is approaching near to being completely filled.

Keep in mind that if your primary hard drive is an SSD, you won’t need to worry about defragging because there are no moving parts reading the disk.

This automatically frees up disk space by deleting transient files and things from the Recycle Bin.

5. Add More RAM

The latest version of Windows 10 handles memory more effectively than previous versions of the operating system; yet, greater memory has the potential to speed up PC processes. The addition of more RAM is not a possibility for many of today’s Windows devices, such as the Surface Protablets, though. RAM upgrades are still common on gaming and business laptops, although they are becoming less common overall. Modern ultrabooks and convertibles, especially the thinner ones, are frequently secured in place.

The websites of the larger RAM manufacturers (Crucial, Kingston, and Corsair) all have product finders that show you what sort of RAM your computer requires, and the prices are rather fair.

If that’s still too much for you, and your computer is really old, has a hard drive rather than an SSD (see below), and has little RAM, you may try running ReadyBoost with a USB stick instead of your PC.

You can get started by navigating to the USB key’s File Explorer entry, right-clicking and selecting Properties, and then selecting the ReadyBoost tab.

PCMag-Recommended Windows Accessories

Not only does an SSD speed up Windows launch, but it also makes loading and utilizing resource-intensive software such as Adobe Photoshop considerably more efficient. Windows Store programs may even be relocated from a spinning hard drive to an SSD with relative ease using the Apps and Features page in the Settings app. It makes sense to replace your internal starter hard disk in order to increase system performance, and if you use a laptop, this may also be an alternative.

However, an external SSD connected through a USB 3.0 port can provide a significant speed gain in applications that require a large amount of storage. Check out PCMag’s article on the best solid-state drives (SSDs) for guidance on which device to install.

7. Check for Viruses and Spyware

You may use the built-in Windows Defender or a third-party tool to accomplish this, but you’ll be better served by Malwarebytes Anti-Malware, which is PCMag security guru Neil Rubenking’s top selection among malware-cleanup apps — and it’s completely free! But don’t forget to keep your anti-malware software up to date. Some antivirus solutions have a less impact on system performance than others, and Webroot SecureAnywhere AntiVirus, according to Rubenking, has the smallest impact of all. Rubenking also gives 4.5-star ratings to Bitdefender’s and Kaspersky’s antivirus software in his Editor’s Choice category.

8. Change Power Settings to High Performance to Optimize Speed

To be sure, this is not a smart option if you want to conserve power, but it has the potential to increase the computing performance of your PC. Make your way to the SystemPowersleep option in the Settings app, and then on theAdditional power settingslink. From here, select High Performance from the dropdown arrow on the right side of the screen, which is located on the right side of the screen.

Recommended by Our Editors

Troubleshoot may be found by searching fortroubleshoot in the Settings app. Windows recommends troubleshooting applications that you should use, and you can select whether to launch them automatically or manually from the Windows Control Panel menu. Run the other troubleshooters as well, including Search and Indexing, Hardware and Devices, and Windows Store Apps, just to be sure everything is working properly. Go to the old-style Control Panel’s System and then to the SecuritySecurity and Maintenance page (or just typemaintenancein the Start menu search box), select Maintenance, and then click Start Maintenance to complete the process.

If your PC is still hopelessly sluggish, you may try using the Windows Security app’sFresh start option.

10. Change Appearance in Performance Options

You may quickly access this setting by typingadjust appearanceinto the search box on the Start menu’s main page. In the dialog box, you may adjust the performance by selecting the radio option at the top labeledAdjust for best results. Alternatives include selecting from a vast range of check boxes the eye-catching qualities you can live without from the list of options underneath these selections. If you select the overall best-performance button, all of the visual effects will be removed from the game.

Keeping the effects that you love checked in the dialog box is certainly a preferable option in this situation. You may also get this tool by going to the new Settings app and searching for the words “maintenance” or “performance” in the results.

11. Turn Off Search Indexing

Search indexing, particularly on lower-powered PCs, can deplete system resources, if only for a short period of time. If you do a lot of Googling, this will not be appealing to you because certain searches will take longer to complete. To turn off indexing, go to the Indexing Options Control Panel and click Turn Off Indexing (you can also just typeindexin the Start button search box to see Indexing Options at the top of the result list). Select Modify from the drop-down menu and uncheck the sites you don’t want indexed.

  1. If you keep search indexing enabled but notice that it is periodically slowing down your PC, you may disable it when you want more speed by clicking on the Stop Search Indexing button.
  2. Select Services from the Services and Applications drop-down menu after double-clicking Services and Applications.
  3. You may select Manual or Disabled as the startup type for the process from this Properties dialog box, which will make the process silent by default.
  4. As a last resort, you can navigate to the right-hand panel and select More choices, followed by End operation.
  5. Reboot your computer after you’ve turned it off if you want to be able to search your system.

12. Turn Off Tips and Notifications

If you think it’s strange that a tips article would urge you to switch off Windows 10’s Advice feature, consider that doing so can lessen the amount of processing Windows must do in order to present appropriate tips for your system. Similarly, Notifications can be characterized as follows: It is more efficient to use less computer power if Windows does not need to create a notice. Currently, I have around 40 applications installed on my phone that are capable of delivering notifications. To make changes to the notification settings, simply navigate to the Notificationsactions page in the Settings app.

Even if you have an excessive number of them, it’s worth your time to comb through the list because you’re certain to identify sources from which you don’t need to be alerted.

Using the Focus Assist button in the Action Center is a quick and simple method to halt alerts. The fact that they are disabled now makes it simpler to enable them later.

Our Top-Rated Windows PCs

For professional tips on how to get the most out of your technology, subscribe to the TipsTricks newsletter. , first published at: 2021-09-30T21:23:24.000000Z, last published at: 2021-09-30T21:23:13.000000Z, created at:null, updated at: 2021-09-30T21:23:24.000000Z” x-show=”showEmailSignUp()”>” x-show=”showEmailSignUp()”>” x-show=”showEmailSignUp()”

Like What You’re Reading?

Sign up for theTipsTricksnewsletter to receive professional tips on how to make the most of your technology. This newsletter may include advertisements, special offers, or affiliate connections to third-party websites. By subscribing to a newsletter, you are indicating your acceptance of our Terms of Service and Privacy Policy. You have the option of unsubscribing from the newsletters at any point.

Leave a Comment

Your email address will not be published. Required fields are marked *