How To Migrate Windows 10 To Ssd


How to move Windows 10 to an SSD

Solid-state drives (SSD) are the best choice if you want a storage drive that is both speedier and more energy-efficient than your current storage drive setup. You aren’t required to start from the beginning, either. It is possible to have the best of both worlds by moving Windows 10 to an SSD. We will demonstrate how to do so. You’ll need to transfer your operating system (along with all of the data it contains) to the new disk if you want to maintain your existing data but benefit from the SSD’s faster performance.

Take note of the following: This instruction is intended for folks who are merely changing their hard drive.

Any virtualization project is unlikely to be compatible with this software; nevertheless, if you’re prepared to pay for the services, you can locate them.

Fortunately, Windows includes a built-in cleaning tool, which you should use before proceeding on.

  • Disk cleaning may be found by searching for it in the Windows search box and clicking the corresponding link that displays.
  • Carefully examine the file kinds listed below, as there are many forms of data that you do not require (temp files, recycle bin data, etc.).
  • Near the bottom of the window, selectClean Up System Files from the drop-down menu.
  • When the Disk Cleanup program changes its behavior to include system file types, it overwrites any modifications you made to the file type list in step 2, so be cautious when making changes to the list.
  • Even with several gigabytes of data, the procedure should be rather quick.
  • The good news is that there are a plethora of applications available that allow you to accomplish this.
  • However, there are various free solutions available, and we have included some of our favorites in this section.

Under the hood of the lengthy name is a well-maintained backup program with a UI that is user-friendly for both experienced Windows 10 users and newbies alike.

Partition Master is a more professional tool with improved data management features.

Make sure, however, that you use the free trial version, which should be sufficient for the duration of your relocation.

You should consider this program if you enjoy the notion of using backup and cloning tools for future projects but do not currently have a suitable solution.

Open up your tool and navigate to the main menu on the left.

Make your selection from the available options — once again, the phrasing may differ — and specify where you want to store your backup files.

This is something that should go without saying, but you should not back up your data onto the hard drive from which you are migrating or the SSD to which you are moving.

Step 3 of EaseUS: Shut down your computer and attach your new hard drive — or your old hard drive, depending on how you’re migrating — to your computer using a USB port.

You’ll need to locate the appropriate slot on your motherboard and insert your NVMe or M.2 drive there if you’re installing one of these types of drives.

Restart your computer and check to see whether the drive has been identified this time.

Look for the option that saysMigrate OS to SSD/HDD, Clone, or Migrate on the main menu.

Once the application has detected the disks attached to your computer and asked for a destination drive, a new window should appear on your computer screen.

It should also offer helpful information about the data stored on each disk; the example below is taken from EaseUS Partition Master, which provides this information.

If a partition on the destination drive has been previously utilized or set to function with another device, you can erase it from the computer.

When they move over, you’ll also have the option of selecting different partition sizes.

Instead, use the option to fit and optimize partitions to the new disk to maximize space on the new drive.

The cloning wizard included into the application will now take control.

You will be notified when the software is done if you confirm that you wish to proceed.

If you have difficulties, double-check that your SATA and power cables are properly connected, and that the older hard drives have enough space to “breathe” so that they don’t overheat.

If you haven’t already, your tool should urge you to do so, or you can select to have your PC restarted automatically after the migration procedure is complete. Afterwards, you can choose whether to delete the backup program or to leave it around for future data management purposes.

Editors’ Recommendations

  • When should you buy a portable SSD? Samsung T5 vs. Samsung T7: which portable SSD should you buy? Instructions on how to delete your Instagram account
  • What is the best way to start a group on Gmail
  • Learn how to utilize Continuity Markup and Sketch in your projects. Apple compensated a student $100,000 for successfully breaking into a Mac computer system.

How to Copy Your Windows Installation to an SSD

(Crucial Position 5) When it comes to your computer, if you’re still utilizing a standard, rotating hard disk, you’re losing out. The replacement of your hard drive with a solid-state drive (SSD) is one of the most effective improvements you can do to improve the performance of your computer. It will boot up faster, apps will run instantaneously, and games will no longer take as long to load as they did previously. In certain cases, it may be desirable to reinstall Windows from scratch; but, with the correct tools, you can get back up and running much more quickly by moving your whole hard drive over to the new SSD.

What You’ll Need

Antenna XPG Spectrix S40GO from ADATA It goes without saying that, in order to upgrade to an SSD, you’ll first have to purchase an SSD. We have some recommendations, but if you’re on a tight budget, we also have a separate list of low-cost SSDs for you to consider. Always be sure to choose a hard drive with the appropriate form factor for your computer (some laptops will use 2.5-inch drives, although others may use M.2 or mSATA drives), and to purchase one that is large enough to accommodate all of your data.

  1. There is one exception: if you’re working on a desktop computer with enough space for numerous hard disks.
  2. Docking Station for Hard Drives by Orico While you’re going through this procedure, you’ll need two hard drives attached to your computer at the same time: one SSD and one old hard drive.
  3. If you’re using a laptop with only one hard drive slot, you’ll need an external adapter, dock, or enclosure that can connect your naked SSD to your computer via USB.
  4. Various drive-cloning tools are available for purchase or download on the internet; nevertheless, there is no completely free, all-encompassing solution.
  5. To utilize an example, if you purchased a Samsung solid state drive (SSD), we recommend downloading and following the instructions in the user handbook.
  6. For the sake of this instruction, we’ll be utilizing Macrium Reflect, which is a free drive-cloning utility that can be used with any brand of hard disk or solid-state drive.

If your drive manufacturer does not provide a migration utility, Macrium Reflect is your next best option. It is available to everyone, regardless of what type of drive they have. Having assembled your supplies, it’s time to get started on your projects.

Back Up Your Data (and Free Up Space)

Before you begin tampering with disks and partitions, it is vitally essential that you back up all of your data first. If you make an unintentional click, you risk losing everything, so don’t proceed unless you’ve made a complete backup of your data. If you don’t already have a backup system in place, have a look at our top-rated software for the task. Windows also has a feature calledFile History, which allows you to back up essential documents, and an image file, which may be used to save the complete system.

Especially if you’re changing to an SSD that’s smaller than your present hard drive, you’ll want to exercise caution in this area.

Your data will not fit on the new drive if you do not do so.

Plug In and Initialize Your SSD

Connect your SSD to the SATA-to-USB converter, and then connect the adapter to your computer. If it’s a brand-new drive, it’s likely that you won’t see it appear in File Explorer right away, but don’t panic; it only has to be initialized first before anything else. Open the Start menu and put “partitions” into the search box at the top of the screen. Select the Create and format hard drive partitions option from the drop-down menu, and Disk Management will launch. It will ask you whether you want to use the GPT or MBR partition table to initialize the disk.

  • I’ll be utilizing GPT for my SSD because I have a contemporary PC with UEFI firmware and hence no need for a partition table.
  • Find out the sort of firmware your individual PC or motherboard uses by looking up the model number of your computer or motherboard.
  • For additional information, see our guide to troubleshooting a hard disk that won’t show up.
  • You should be able to go from there without any problems.

Clone Your Drive

When you first launch Macrium Reflect, you should see a list of available drives in the main window. Locate and choose your current disk (it will display your C: partition with a Windows logo), then click OK. To begin the cloning process, click theClone This Diskbutton that appears underneath the drive you want to copy. This will open a new window in which you will select your destination drive, which in this case will be your empty SSD disk. As seen above, if your SSD is the same size as your previous drive, select the box to the left of your source disk all the way down, then clickSelect a Disk to Clone to begin the process.

  1. If your new SSD is much smaller than your previous disk, you may need to take an additional step to complete this process.
  2. You may manually drag each partition down to the SSD and then clickCloned Partition Propertieson your primary C: drive to manually resize it if you are experiencing this difficulty.
  3. You’ll be asked if you wish to save this backup schedule once you click the Next button.
  4. This might take anything from a few minutes to many hours, depending on how huge the disks are, so go watch something on Netflix and come back later to finish it.

When it’s finished, you’ll be able to close Macrium Reflect. In File Explorer, you should be able to view your new SSD, which should include all of your data.

Install Your SSD

After that, turn off your computer. It is now necessary to permanently install the SSD in your computer. It will be necessary to remove your old hard drive and replace it with your SSD if you have a laptop that only has one hard drive slot available. Every laptop is a little different in this regard. For desktop computers with more than one hard drive slot, you may leave your old hard drive in place as additional storage and just install an SSD alongside it, saving you time and money.

You might be interested:  How To Full Screen On Windows 10

Reboot From Your New Drive

Once you’ve completed the installation of the SSD, you’ll need to instruct your computer to use it as the primary boot device. (This may not be essential on laptops with only one hard disk, but it may be beneficial on some PCs if you are experiencing booting troubles.) As soon as your computer starts up, you’ll want to enter its BIOS/UEFI setup—this may vary from PC to PC, but it will normally state something like “Press DEL to enter setup” on the boot screen, so you’ll want to press the equivalent key as soon as it starts up.

  1. From there, check for the boot choices that are available in your BIOS.
  2. Select your SSD from the list as the first boot drive, and then return to the BIOS’s main menu to quit, preserving your settings in the process.
  3. Open File Explorer and verify that your SSD is, in fact, the C: disk by double-clicking on it.
  4. If your previous drive is still connected, you may either delete it and utilize it to store more data, or you can completely unplug it from the computer.
  5. For professional tips on how to get the most out of your technology, subscribe to the TipsTricks newsletter.
Like What You’re Reading?

Sign up for theTipsTricksnewsletter to receive professional tips on how to make the most of your technology. This newsletter may include advertisements, special offers, or affiliate connections to third-party websites. By subscribing to a newsletter, you are indicating your acceptance of our Terms of Service and Privacy Policy. You have the option of unsubscribing from the newsletters at any point.

Freeware: Easily Migrate Windows 10 to SSD without Reinstalling OS

Transferring Windows 10 to an SSD often entails moving all of the files on the Windows 10 OS disk as well as the system-related partition to the SSD, allowing you to effortlessly boot your computer from the destination SSD when the migration is complete. In terms of why you should migrate Windows 10 from a traditional hard disk drive to an SSD, there are two primary considerations that should be considered. First and foremost, improve your overall performance. SSD does not have any moving parts, which makes it more silent and reduces the likelihood of it becoming damaged.

It is an excellent idea to convert Windows 10 to a solid-state drive for customers who want the efficiency and convenience of a fast and responsive operating system.

◆ Furthermore, you may have encountered low disk space in your everyday life, particularly for the system partition, which has a negative impact on the performance of your computer.

Given that SSDs are more costly than HDDs, it is also a sensible decision to acquire an SSD with a lesser capacity, move Windows 10 to the smaller SSD, and use the SSD for the operating system and the HDD for the storage configuration.

Clean install or clone Windows 10 on SSD drive?

The decision on whether or not to perform a fresh install is dependent on your desire and the state of the software installed on your present hard disk. Specification: If you installed third-party applications on a drive other than the system drive, namely the C drive, you can back up your personal files on the C drive and perform a clean installation on the SSD drive. The apps that have been installed on other disks will not be impacted. If the installed software is combined with system programs, the clean installation process will take significantly longer because you will have to reinstall all of these programs as well.

If you want to keep your data intact while saving time, cloning is the most straightforward method of transferring Windows 10 to a new SSD.

Best software to free migrate Windows 10 to SSD

Many SSDs, such as the Samsung Data Movement program, come with built-in data migration software. Generally speaking, this sort of migration program does an excellent job in most situations. However, it will transfer everything from the old hard drive to the new SSD, rather than just the Windows 10 operating system. Furthermore, it is limited to the Samsung SSD disk alone. It is therefore stress-reducing to use an OS migration application that is dependable and comprehensive in its capabilities.

Even if you are a complete newbie when it comes to computers, the “Migrate OS to SSD” wizard will guide you through the migration process step by step.

Consider the case of transferring the Windows operating system to a smaller solid-state drive (SSD).

How to migrate Windows 10 to (smaller) SSD without data loss?

According to technical specifications, there are three elements that must be completed in order for an operating system to be moved to an SSD: preparations before the migration, the transfer procedure, and boot-up test work after the migration. These topics are described in further detail in the following sections.

▌ 1. Preliminarywork before migration:

Connect the SSD to your Windows 10 PC using a USB cable. However, although most desktop computers include an additional disk space for SSDs, a USB-SATA connection cable may be required to move Windows 10 to an SSD on a laptop. Ensure that the SSD has unallocated space that is equal to or more than the amount of space consumed by the present operating system partition. If your SSD is less than the amount of space currently being utilized by your present system disk, you can back up personal files, videos, music, movies, and images in particular to other locations that will not be moved to your SSD when you upgrade.

At the same time, perform a disk cleanup to allow Windows 10 to fit on the new SSD. If you wish to move Windows 10 from an HDD to an SSD, you must first do a hard drive partition defragment before proceeding with the clone.

▌ 2. Steps to move Windows 10 to SSD free

Step 1: Download and install AOMEI Partition Assistant Standard. Step 2: In the left pane, select “Migrate Operating System to SSD.” You will be presented with an introduction to this wizard, which you should read before pressing “Next.” Click “Next” once you have selected the unallocated space on your SSD as the target location. Step 3.On this page, you have the option of resizing the system partition and changing the HDD. Then a message will appear with instructions on how to start Windows 10 from an SSD.

Step 4.Confirm that all actions were successful, and the E: disk now contains the cloned Windows 10.

▌ 3. Boot Windows 10 from SSD and format old drive

So far, the Windows 10 operating system has been successfully transferred to SSD. As soon as the migration is finished, detach the cloned SSD and shut down your Windows 10 PC completely. It is now necessary to replace the old hard drive with a cloned SSD. Keep an eye on the progress of the replacement, and you may need to use a screwdriver to help you out. If you wish to maintain the old drive but boot from the SSD, you may do so by changing the boot priority of the SSD in the BIOS settings. However, the first method that is advised for a complete examination.

After the transfer, the previous Windows 10 operating system remains in place.

Furthermore, if you have already backed up data, you may need to restore files from the backup.

Migrate Windows 10 to SSD GPT and UEFI

There is one more question to which you should pay close attention. AOMEI Partition Assistant Standard is limited to transferring the Windows 10 operating system from one MBR disk to another MBR disk. If you are migrating from MBR to GPT, GPT to MBR, or GPT to GPT disk, you must upgrade from the Standard to the Professional edition. If you plan to transfer Windows 10 to a GPT SSD, it is critical that your motherboard supports the EFI/UEFI boot mode. If this is not done, the cloned SSD may be unable to boot.


With AOMEI Partition Assistant Standard, you can easily migrate Windows 10 to an SSD without the need to reinstall the operating system on your computer or laptop. Furthermore, in addition to shifting merely the operating system to an SSD, AOMEI Partition Assistant has a “Disk Clone Wizard” that may clone the complete hard drive to an SSD in Windows 10. It also includes a “Partition Clone Wizard,” which may be useful if you want to migrate Windows 10 OEM to an SSD. AOMEI Partition Assistant Standard is a partition management tool that is specialized in AOMEI products.

As a result, if you are a user who needs to manage your partitions quickly and efficiently, you cannot afford to overlook this free yet professional program.

Users of Windows Server operating systems who want to manage disk partitions in the Server operating system might consider using AOMEI Partition Assistant Server.

How to Migrate/Clone Windows 10/11 to SSD


  1. 1. What Does the Phrase “Clone Windows 10 to SSD Mean” Mean? 2. What is the best SSD cloning software for Windows 10
  2. 3. How to Migrate Windows 10 to an SSD (with video)
  3. 4. What is the best SSD cloning software for Mac OS X
  4. 5. 4: How to Migrate Only Windows 10 to a Solid State Drive
  • You’ll be using Microsoft Windows OS migration software to clone Windows 10 to a solid-state drive in this step. You may also use this procedure to clone Windows 11 to a solid-state drive. You may improve the performance of your PC by upgrading your hard drive to solid state drive (SSD). You may obtain a free Windows 11 upgrade from Windows 10 if you have an SSD for faster startup.

In response to the question “Should I update my computer now?” posed by several of my friends who had just experienced a sluggish hard disk, my response is “not really.” Instead, consider upgrading your hard drive to a solid state drive (SSD) or replacing the smaller SSD with a larger SSD. A significant improvement in the starting speed of Windows 10 will almost certainly be noticed after upgrading to a Solid-State Drive that is lighter, more compact, and more durable. Nonetheless, you are not required to save all of your Windows data on the new SSD.

Following that, you’ll get a lot more out of obtaining the competent SSD cloning program -EaseUS Todo Backup – than you would otherwise.

Considering that it is a mature piece of automatic Windows OS migration software, anyone who has a desktop or laptop may successfully do the task: Microsoft recommends that you migrate Windows 10 to an SSD by copying the Windows system drive partition from an HDD or SSD to the new SSD.

What Does Clone Windows 10/11 to SSD Mean?

If you’re weary of having to wait for your computer to boot up or for your applications to load, you might consider installing a solid-state drive (SSD) in your computer. Now that solid-state drives (SSDs) are more accessible than ever, you should consider purchasing one for your desktop computer. However, you may be unfamiliar with the process of installing Windows 10 on a freshly formed storage drive. As a result, the word CLONE is coined. To clone Windows 10 to an SSD, you must create an exact replica of the source drive’s information and disk structure before proceeding.

What’s the Best SSD Cloning Software for Windows 10/11?

This applies to Windows 11, Windows 10, as well as Windows 8.1, Windows 8, Windows 7, XP, and Vista. It is possible to install a solid-state drive (SSD) without reinstalling Windows in the event that Windows 10 is installed on a standard hard disk. This may be accomplished by cloning the system drive with the aid of disk imaging software. In the event that you’re looking for a trustworthy way to entirely migrate Windows 10 from a hard drive to an SSD or clone Windows 10 to an SSD, EaseUS Todo Backup may be the greatest option for you, however it is not the only one available.

  • Even if the capacity of the SSD is less than the capacity of the HDD, EaseUS Todo Backup can handle it, regardless of how little or large it is. In addition, it supports SSD 4K alignment, which is essential for ensuring that the SSD’s performance is not adversely affected. “Clone” is only one of several functions available. It is a multi-functional Windows program that includes other useful features such as backup and recovery. Because it supports cloning to portable hard drives, you can simply insert your SSD into a removable hard drive case and begin cloning. With support for both the UEFI and the BIOS
  • The user interface is straightforward and straightforward
  • It is user-friendly.

How to Migrate Windows 10/11 to SSD with Easeus Todo Backup

Todo Backup is a secure and effective system backup and disk clone software that is fully compatible with the latest Windows operating systems. Its disk clone feature allows users to clone and migrate entire computers, including the operating system, to a new solid-state drive (SSD) while preserving all of the data.

Make use of the EaseUS Todo Backup software to clone the system drive and then migrate Windows 10 from HDD to SSD as outlined in this guide. How to Clone Windows 10/11 to a Solid State Drive (SSD)

01.Connect A Second Hard Drive

It is necessary to have the following tools: an allen wrench, an adapter cable for the power splitter, a SATA cable, or a USB to SATA adapter. Make certain that the destination HDD/SSD has a capacity greater than the present drive’s available space.

  • The destination disk should be connected to your computer. If you’re working on a desktop, open the mainframe with a screwdriver and attach the disk to the mainboard using a SATA connection, then plug the disk’s Power Splitter Adapter Cable into the power supply box. Connecting the drive to a laptop is made possible with the use of a USB to SATA adapter. Before you can use a new HDD/SSD, you must first format it with the MBR or GPT file system (in order to retain the target new disk in the same style as the present disk).
You might be interested:  What Is The Best Antivirus For Windows 10
02.Download a Disk Cloning Utility

Easy-to-use disk cloning program that incorporates numerous features such as system/disk cloning, backup and restore operations, and system transfer amongst many other things. The following characteristics distinguish this tool from others in the disk cloning field:

  • Covers as many disk cloning requirements as there are, such as updating a hard drive to a bigger one, cloning an operating system, and so on. In comparison to all other similar products available on the market, disk cloning has the best success rate. This driver supports all sorts of disks, including IDE, EIDE, SATA, ESATA, ATA, SCSI, iSCSI, and USB 1.0/2.0/3.0-based devices. Supports the cloning of basic and dynamic drives, as well as MBR and GPT disks.
03.Get Ready with the Clone Procedures

System Clone: Select System Clone from the drop-down menu and then select the destination disk. To begin, select Next from the drop-down menu. You have the option of selecting the option of in the Advanced settings. Create a portable Windows USB drive so that you may clone the system to a portable USB drive later on. Clone a disk or a partition: Select Clone from the drop-down menu. Choose the resource disk or partitionSelect the target disk from the drop-down menu To begin, click on the Next button.

04.Boot from the Clone Hard Drive

Option 1, if you wish to keep both the old disk and the new disk, is the most straightforward.

  • Restart the computer and press F2 (or F8, F10, or DEL) to access the BIOS settings
  • The new HDD/SSD should be selected as the new boot disk under the Boot option. Restart the machine after exiting the BIOS.

Option 2: If you merely want to keep the fresh disk, you can do so.

  • Remove the old disk and double-check that the new disk is properly attached
  • Restart your computer to get things going again. In the case of laptops, Option 2 is a better hard drive retention strategy.

If you follow these easy procedures, you will be able to simply transfer your Windows 10 operating system from your old hard drive to your new SSD. Furthermore, EaseUS Todo Backup is capable of backing up and restoring the Windows 10 disk/partition as well as data stored on HDD/SSD.

How to Migrate Only Windows 10/11 to SSD

For example, what happens if you wish to exclude everything (installed programs, apps, personal data) from the cloned SSD except the Windows 10 system-oriented files? Is there a method to maintain only the Windows 10 system files on the destination SSD without affecting the rest of the data? The reality is that none of the disk cloning software packages now available on the market can complete the task in a single step. However, by enlisting the assistance of another EaseUS application -EaseUS Todo PCTrans – you will be able to accomplish your objective flawlessly.

You can complete one more step to transfer selected files from one hard disk to another for the other data files that were brought along throughout the cloning procedure.

  • How to move applications from a computer to an external hard disk
  • Instructions on how to move programs from the C drive to the D drive

Migrate Windows 10 to SSD without Reinstalling

There are many customers nowadays who desire to migrate their Windows 10 installations to SSD without having to reinstall the operating system, but many are unsure how to go about it, like in the following example. Don’t be concerned about anything since this guide will walk you through the full procedure, from preparations to a secure boot. My computer is equipped with one hard drive and one solid state drive (SSD). Windows 10 is now installed on an HDD, and I wish to convert it to a solid state drive (SSD).

Because my computer just has Windows installed, I simply want a method that is effective.

Please accept my thanks in advance. A short navigation menu for all of the material in this article is provided here for your convenience. You can learn what you need to know by just clicking on the anchor text.

  • How to move Windows 10 to SSD
  • Reinstall Windows from scratch or clone Windows 10 to SSD
  • And what are the benefits? AOMEI Backupper Standard is the best free Windows 10 migrating solution available. How to move Windows 10 to a solid-state drive (SSD) without reinstalling the operating system
  • Bringing everything to a close

Why migrate Windows 10 to SSD?

Although Windows 10 has improved the starting time when compared to the previous edition, some users may still feel that the machine is not running at a fast enough pace. As a result, many users attempt to migrate their Windows 10 installations to solid state drives (SSDs) in order to improve the overall performance of their computers, including booting time, writing and reading speeds, and so on. According to some sources, an SSD is ten times quicker than a traditional hard drive. Furthermore, because SSDs do not have any moving elements, they are both quieter and less susceptible to damage.

Additionally, if your computer is equipped with a smaller SSD, you may be disappointed by the little storage capacity it provides.

Reinstall Windows from scratch or clone Windows 10 to SSD

Reinstalling Windows entails installing a fresh copy of the operating system as well as any drivers that are necessary to boot the computer up. It is advantageous when installed programs and personal data are stored on a non-system partition since it will have no negative impact on the system partition itself. The personal data will be destroyed during the installation process if you save them on the system partition, though. After that, you will have to spend a significant amount of time reinstalling the apps you require and resolving the reactivation issue.

Is there a faster and more convenient way to move Windows 10 from a hard drive to an SSD without reinstalling the operating system, ideally one that is free?

Everything on the disk, including the operating system(OS), drivers, disk layout, installed programs, personal data, working documents, and so on, will be cloned throughout the cloning process.

Best free Windows 10 migration tool – AOMEI Backupper Standard

You’ll need the assistance of the greatest free Windows 10 migration application -AOMEI Backupper Standard – if you want to retain your apps and all of your vital data on the disk. It can assist you in transferring Windows 10 to an SSD without difficulty and assure a secure boot. Additionally, it is compatible with Windows 7, Windows 8/8.1, Windows XP, and Windows Vista to clone HDD to SSD. Here are some of its most valuable characteristics, which may make the cloning procedure more simpler. ☞ It includes a wizard-like interface, which allows users to rapidly and simply comprehend the software and utilize it without difficulty.

You only need to ensure that the amount of space utilized on the old drive is less than or equal to the amount of space used on the smaller SSD.

☞ If your SSD is larger than the previous drive, you may use the ” Sector by sector clone ” tool to copy all of the sectors from the old drive.

☞ You may use it to clone any branded SSD, whether SATA, PCIe, mSATA, M.2 or USB, including Samsung, Dell, WD, Kingston, and HP SSDs, among others. This allows you to migrate Windows 10 to SSDs such as Samsung, WD, and SanDisk among other manufacturers.

How to migrate Windows 10 to SSD without reinstalling OS

Upgrading your hard drive to an SSD with SSD disk cloning software such as AOMEI Backupper Standard might be the quickest and most convenient option to increase the speed of your PC. However, its storage space is often less than that of an HDD. As a result, the recommended practice is to utilize an SSD for the operating system and an HDD for storage, allowing you to benefit from higher performance while also increasing storage space. Now, without any further ado, let us take a closer look at the complete procedure.

Step 1: What needs to be done in advance?

Installing an SSD drive and cloning it with software such as AOMEI Backupper Standard might be the quickest and most straightforward approach to speed up your computer. The disk space, on the other hand, is often less than that of an HDD. So the recommended practice is to utilize SSD as the operating system and HDD as the storage device, allowing you to benefit from both increased performance and increased capacity. Now, with out further ado, let us take a closer look at the complete procedure.

  • Purchase an SSD that will meet your computer’s specifications. Unless you have an Ultraportable Notebook, which may have a smaller 1.8-inch hard drive, the majority of laptops use a 2.5-inch hard drive. SSDs are also available in a variety of thicknesses (either 7mm or 9.5mm) and with a variety of connectors. Preparing an SSD connector for your computer, which is commonly a SATA-to-USB cable or adapter, is essential if it is a laptop. If your HDD is larger than your SSD, you should put it on a diet. You may remove any unnecessary files or temporal files, as well as uninstall any apps that are no longer in use. Aside from that, you may transfer enormous data to another disk, such as movies, mp3, working papers, and so on.

Other preparations should be made prior to migration:

  • In the disk management, you may view the disk partition style by looking at its characteristics. You must make certain that both disks are MBR or GPT disks. Set the SATA Controller mode to AHCI in order to get higher speeds. System backups and disk images should be created for your computer to avoid a system crash or data loss. Even if the cloned SSD is unable to start owing to a variety of factors, you may restore your computer with the backup image in a timely manner.

Step 2: Move Windows 10 to SSD with AOMEI Backupper Standard

1.Connect your SSD to your computer and verify that it is recognized by the computer. Then, download and start AOMEI Backupper Standard to complete the process. Clone may be found on the sidebar, followed by Disk Clone. 2.Choose the present HDDas source disk and press the Next button. 3.Click Next after selecting the new SSD as the target drive. In order to boost the read and write speeds of your new SSD, check the ” SSD Alignment ” box. Then, to begin the cloning process, select ” Start Clone ” from the drop-down menu.

You can clone all sectors of the drive, regardless of whether they are currently in use, while the second option allows you to make full use of the available disk space by selecting either “Add unused space to all partitions” or “Manually change partition size” from the drop-down menu.

a few pointers.

◎ Upgrade to AOMEI Backupper Professional if you want to clone an MBR disk to a GPT SSD without altering the partition style, or if you want to migrate solely the Windows 10 operating system to an SSD.

Step 3: Boot from the cloned hard drive

By using a screwdriver, you may replace the hard drive in Windows 10, restart your computer, and then hit a certain key when you get a prompt such as Press ESC to enter BIOS, navigate to the Boot tab, and choose the cloned SSD as the first boot option, then press F10 to save changes and boot.

Step 4: Format HDD for reuse

To access this program, open the Run window and type diskmgmt.msc into the text box.

Then click OK. Follow the on-screen instructions after selecting ” Format” from the context menu of the hard disk.

Step 5: Restore files from backup

If you make a file backup, you can restore it later. In order to prepare for transferring Windows 10 from HDD to SSD, you may launch AOMEI Backupper Standard, pick RestoreandSelect Task from the left-hand menu, select the data to be restored and the location where the files will be saved, and then click Start Restore. You can utilize the previous system or disk backup to mount as virtual partition(s) in file explorer and copy and paste the data you need if you have previously created a system or disk backup by clicking ToolsandExplore Image.

You might be interested:  How To Record On Windows 10

Wrapping things up

With the aid of the SSD disk cloning program AOMEI Backupper Standard, you can effortlessly and rapidly migrate Windows 10 to an SSD without having to reinstall the operating system on your computer. After cloning, you will discover that everything is exactly the same as it was before, with the exception of greater speed. If you enable the “SSD Alignment” function, you will see a more noticeable difference. This is due to the fact that this feature will further improve the overall performance of the SSD drive.

It can achieve the same result as cloning and can save your computer regardless of how terrible the problem is; however, it will involve a bit more work on your part.

How to Clone or Move Your Windows 10 Installation to a Larger Hard Disk or SSD

The SSD disk cloning program AOMEI Backupper Standard allows you to migrate Windows 10 to an SSD without having to reinstall the operating system. The results of cloning are the same as they were previously, with the exception of speedier loading times. If you enable the “SSD Alignment” function, you will see a more noticeable difference in this experience. Because of this, the total performance of the SSD drive will be improved even further. This program, in the meantime, continues to function as a Windows 10 backup and restore application, allowing you to back up your system/disk/partition and data as necessary.

There are also more backup options, such as compression and encryption, as well as the ability to schedule backups on a daily, weekly, or monthly basis, incremental and differential backups, and USB plug-ins, among others.

Migrate your Windows 10 Installation to a New Hard Disk or SSD

System Image is a built-in feature in Windows 10 that allows you to generate a complete copy of your system, including all partitions, and save it to your computer. We have already discussed the procedures involved in creating a system image. A USB external hard disk with enough space to save the image will be required to back up your system. An external hard drive with enough of storage is a low-cost and highly recommended purchase, regardless of whether you plan to undertake this type of activity or maintain your system backed up on a regular basis.

  • For example, if you upgrade from a 500 GB hard drive to a 256 GB SSD and then attempt to restore the system image made from the 500 GB disk, you will receive an error message stating that the disk is too tiny to accommodate the system image.
  • After you have created your backup, shut down your computer, install your hard disk or SSD drive, restart your computer, and then load your BIOS or UEFI firmware (if applicable).
  • After you have confirmed these modifications, connect your external hard disk and turn on the device.
  • When you get at theInstall Nowscreen, select theRepair computerlink to start the Recovery Environment, which will take you to the Recovery Environment.
  • Your external hard disk should be recognized, as well as the most current system image that you made on your computer.
  • This option is useful if you have more than one local disk or partition and want to exclude one or more of them from the restoration procedure.
  • Depending on the size of the system picture, the restoration process may take some time.
  • If you restore the system image to larger disks, there is a potential that you may need to reorganize your partitions if you restore the image to a larger hard disk or solid-state drive (HDD or SSD).

You will notice that an unallocated area has been created specifically for you. The Extend volume wizard can be used to regain some of this space. Right-click the system partition and select Extend from the drop-down menu. Then select Next and Finish.

Restoring to a Smaller Hard Disk or SSD

If you are moving in the opposite way and restoring to a smaller hard disk or SSD, cloning will be the most recommended solution in this case as well. The freeEaseUs Todo Backup software is the most effective tool I have discovered for cloning and restoring a Windows 10 system. It is possible to restore a backup of your Windows 10 system to any partition layout with EaseUs Todo Backup, including partition layouts that are not compatible with the backup. You may get a free copy of the book by clicking here.

  1. You will need to connect the target hard disk or SSD to the machine where you would want to clone your Windows 10 installation before you can proceed with the process.
  2. Launch EaseUs Todo Backup and select the Clonetab after determining the best method of attaching the target drive.
  3. The drives attached are as follows: my Windows 10 installation on Hard Disk 0 31 GB and my newLOCALNEW disk 25 GB, to which the clone will be transferred (as you can see below).
  4. In the following step, we will pick the target disk, which in this case will be ourLOCALNEW disk25 GBdrive.
  5. The disk layout after replicating the old drive to the new one is seen in the following screenshot.
  6. To confirm the changes, press the OK button.
  7. After the cloning process is complete, click Finish to shut down your computer, remove the old storage device, then install and configure the new hard disk or SSD as your boot drive, if applicable.
  8. Even so, if you are experiencing activation issues, you may utilize theActivation Troubleshooter in Windows 10 Anniversary Update or later to remedy any issues you are experiencing.
  9. My own experience has taught me that if you are upgrading to a storage device that is significantly larger than the one you are replacing, the built-in System Image tool in Windows 10 is more than adequate for your needs.

It goes without saying that extra instruments to aid in the restoration process, such as an external hard disk or even an external enclosure, may be required in some cases.

How to move Windows 10 to an SSD without reinstalling

  • Moving your operating system from an old SDD to a new SDD can enhance the booting time and overall system performance. It is demonstrated in this post how to migrate an already installed system to an SSD without having to do a clean installation. While you’re waiting for the transfer to be completed, you may browse through our extensive collection of Windows 10 guides. You will, without a doubt, discover something valuable. Visit our LaptopPC Troubleshooting Hub for even more information and advice.

X INSTALLATION IS COMPLETE BY CLICKING ON THE DOWNLOAD FILE When compared to earlier versions of Windows, Windows 10 already has a faster boot time, but switching it from a standard hard drive to a new solid-state drive would enhance the boot time and general performance of the machine much more. Many people are curious as to whether they can switch the operating system to an SSD without losing any data. There are a few different methods for transferring your system data from your present hard drive to a new solid-state drive, and we’ll go through each of them in this post.

Perhaps the most straightforward approach is to conduct a clean install on the SSD disk, but doing so will result in the loss of all data and the have to reinstall all of your apps.

However, if you are not interested in trying new things, this may be the way for you.

You’ll need to format your current system partition first, and then just install a fresh copy of Windows 10 on a solid-state drive (SSD).

How do I move Windows 10 to an SDD?

A method exists, however, for moving an existing system to an SSD without having to undertake a whole system installation. To get started, all you have to do is clone your system partition to the SSD and you’ll be ready to go. It is necessary to back up your data, minimize disk space on your computer’s hard drive, copy your system partition to an SSD, and format the system partition on your hard drive. Is it really that straightforward? No, it will take some effort on your part to correctly relocate the operating system.

  1. But, first and foremost, you must make a backup of your data since, if something goes wrong, you might lose it for good, and it will be necessary for the procedure.
  2. SSDs have significantly less storage capacity than traditional hard drives, therefore we want your system partition to fit on the SSD drive as much as possible.
  3. It is OK to destroy your personal information since you will be able to recover it from your backup when the process is completed.
  4. In the meanwhile, it’s finally time to migrate your Windows 10 installation to an SSD!

How do I transfer my OS from HDD to SSD?

Laplink PCMover is a tiny desktop program that may assist you in quickly and conveniently moving all of your data, settings, and user profiles to your solid-state drive (SSD) or other storage device. All that is required is that you download the program and follow the simple tutorial instructions to get started. Laplink PCMover makes the entire procedure simple, painless, and intuitive. It is incredibly user-friendly and intuitive. The programs have been installed and are ready to be used immediately.

If you’re having problems correcting an issue, it’s possible that your system is partially broken.

To download and begin mending, go to this link.

All you have to do is configure the transfer, and the program will take care of the rest! Obtain Laplink PCMover from the official website. How can I transfer my operating system using Laplink PCMover?

  1. To begin, download and install Laplink PCMover on both your computer and your solid state drive (SSD). The SSD must be connected to your PC at all times during the procedure (please double-check this). Open the tool on both your PC and SSD at the same time after that. Select the network technique that you will use to link your systems in order to send the data. Laplink recommended that you use WiFi. then follow the on-screen instructions to allow the utility to discover the SSD (which will be shown as New PC)
  2. Open Laplink PCMover on the SSD once the two devices have been linked. When you click on Analyze PC, you will be guided through the process of customizing what you want to be transferred and allowing the transfer to be completed.

It will take a few hours for the procedure to be completed completely.

2. Use a backupper tool

  1. The entire process will take a few hours to complete.

If Windows does not activate once the copying procedure is complete, follow the steps in this tutorial to resolve the issue. All right, that’s it. Your Windows 10 has been successfully transferred to the SSD disk, and it will run significantly quicker from now on.

How to restore your personal files and user folders

Because your SSD is likely to be at capacity, we’ll have to restore your contents to the old, formatted HDD disk in order to avoid losing any data. Begin by navigating back to your previous disk (which should now be fully empty) and creating a new folder to which you will save all of your user folders and personal stuff. You may call it whatever you like (we used WinReport). Now, navigate to C:Users and enter your login. You should be able to see all of your user folders. Right-click on each one and select Properties from the drop-down menu.

Move the cursor to theMovebutton and choose the newly formed folder as the destination.

Last but not least, you must restore your personal files, which is the last step.

  1. Open your backup (anywhere you choose to save it, whether it’s on the cloud, on an external drive, on another partition, or another location)
  2. After that, drag all of your user files (documents, music, images, and other files) into your new My Documents, My Music, and other folders
  3. And

All of your personal files will be available as a result of this procedure, despite the fact that they are not located on the system partition. Although it is possible that you will need to modify the settings of your favorite programs and games because they will most likely save data in the oldMy Documents folder. If you want to reinstall your Windows 10 applications on your new hard drive, follow this procedure for a smooth transfer. That’s all there is to it; we’ve provided you with a comprehensive instruction on how to transfer your Windows 10 system from your old hard drive partition to an SSD and get everything to function.

Frequently Asked Questions

  • What is the best way to get my operating system to transfer to an SSD for free? In order to run Windows 10, how large needs an SSD be? In order to transfer or install Windows 10, it is advised that you have at least 20GB of free space on your new SSD. What is the greatest solid-state drive (SSD) for Windows 10? A large number of alternatives are available
  • However, narrowing down the selection by considering capacity, transfer speed, and pricing is a good place to start. In this updated list of the top solid-state drives (SSDs) on the market, we have some recommendations

Leave a Comment

Your email address will not be published. Required fields are marked *