How To Reboot Into Safe Mode Windows 10

Contents

Opstarten in veilige modus in Windows 11 of Windows 10

Duration: 0:50 Alleen Engelstalig is the subtitle for this piece. The safe mode starts Windows in a default state with the assistance of a limited collection of files and drivers. When a problem does not manifest itself in the safe mode, it means that the standard settings and basisapparaat drivers have not been able to resolve the problem. When you run Windows in the secure mode, you can see what is causing a problem and assist in resolving it on your PC. There are three different types of opstartopties that are available in the safe mode that are not available in the more advanced opstartopties.

  1. Veilige modus- In this mode, Windows is started with the fewest number of drivers and services as possible. The same as the secure mode with networks, but it also adds the network drivers and services that you require in order to gain access to the internet and other computers on your network, as opposed to the secure mode. This mode is also required if you intend to use devices such as a USB flash drive or a USB flash drive. ADVICE: The use of wireless (Wi-Fi) internet connections in a secure manner with other networks will not be investigated. Veilige mode with opdrachtprompt- Zelfs as veilige modus, maar met de opdrachtprompt als gebruikersinterface in plaats van de grafische gebruikersinterface (GUI) van het Windows-bureaublad
  2. Veilige modus avec opdrachtprompt- Zelfs als veilige modus, maar met de opdrachtprompt als ge

OPMERKING:The Windows Installer-service has been started in the secure mode and the secure mode with the opdrachtprompt, respectively. Installation and disabling of applications are both prohibited in these two configurations.

Oorzaak

Windows has fewer features while it is in the hidden mode of operation. Because many non-essential components have been disabled, such as audio, third-party drivers and services, non-essential Windows services, and others, the process of isolating problems is made easier and more efficient. It is impossible for Windows to start in the regular mode if there is corrupted software, drivers, or the installation of software that has been improperly configured.

Oplossing

  1. To open the Windows+Alsop the toetsenbord, click on the Windows+Alsop the toetsenbord button.
  • Make a right click on the Windows+Also on the toetsenbord to enter the Settings menu.
  1. In the left-hand menu, selectBijwerken en beveiliging, and then Herstel in the right-hand menu
  2. Click on onderGeavanceerd opstarten and then on Nuopnieuw opstarten to return to the previous page. After the computer has been booted up, you can pick a program from the start-up menu. Make a decision on a problem-solving strategy. options that are cutting-edge opstartinstellingenopnieuw opstarten
  3. Opstartinstellingenopnieuw opstarten
  4. After the computer has been restarted, a list of available options is displayed on the screen. Selecteer4ofF4in order for the machine to boot up in a secure mode of operation. When you need to use the internet, choose u5ofF5for a secure mode with network capabilities.

Start op in veilige modus vanaf het aanmeldscherm in Windows 11 of Windows 10

  1. Start the computer as soon as possible
  2. After selecting PowerRestart from the aanmeldscherm, click on the deShiften button. After the computer has been turned on, the cursor will go to the screen. Make a decision, and then work on a problem-solving strategy. Options that are cutting-edge Opstartinstellingen It is possible to opt-in
  3. However, it is not recommended. After the computer has been restarted, a list of available options is displayed on the screen. Selecteer4ofF4in order for the machine to boot up in a secure mode of operation. When you need to use the internet, choose u5ofF5for a secure mode with network capabilities.

Start op in veilige modus buiten Windows 11 of Windows 10

Following the failure of the third attempt to reach the opstarten, Windows 11 and Windows 10 are automatically reinstalled in the Windows Herstelomgeving (WinRE). Continue with these steps in order to open the secure mode from within the Windows Recovery Environment (WinRE):

  1. In the SelecteerProblems Solved in the Scenario option, choose Problems Solved in the Scenario
  2. In the scherm, advanced options are available for selection
  3. Problem solving options are also available. SelecteerGeavanceerde opstartopties in het scherm Geavanceerdeoptionen
  4. SelecteerGeavanceerde opstartopties in het scherm Optional selecteerings for opstarten The SelecteerOpnieuw program is now being used. The computer is restarted and the menuOpstartinstellingen is displayed for the first time after the restart. Selecteer4ofF4in order for the machine to boot up in a secure mode of operation. When you need to use the internet, choose u5ofF5for a secure mode with network capabilities.

Extra informatie

The G Series includes Chromeboxes, Alienware Inspiron and OptiPlex laptops as well as the XPS and XPS Pro. The G Series also includes Chromebooks and Alienware Inspiron and OptiPlex laptops as well as the Latitude and Vostro laptops and the XPS Pro. 15th of December, 2021

Dit artikel beoordelen

There will be no special tekens included in the following observations:()

Start your PC in safe mode in Windows

Safe mode begins Windows in a minimal form, with just a small number of files and drivers loaded. If a problem does not occur in safe mode, this indicates that the issue is not being caused by the system’s default settings or basic device drivers. It is possible to troubleshoot problems on your computer while Windows is running in safe mode, and this might help you narrow down the cause of the problem. Safe Mode is available in two flavors: Safe Mode without Networking and Safe Mode with Networking.

Please choose one of the following sections to learn how to start your computer in safe mode from the Settings menu, the sign-in screen, a black or blank screen, or any other screen.

  1. To enter the Settings menu, press the Windows logo key plus I on your keyboard. If it doesn’t work, press the Start button, then click Settings
  2. Then select SystemRecovery from the drop-down menu. Open the Recovery Configurations
  3. Select Restart now from the Recovery options menu, which is located next to Advanced startup. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  4. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in Safe Mode by selecting4or pressingF4. Alternatively, if you will be need internet access, select5or pressF5for Safe Mode with Networking

You can restart your device from the Windows sign-in screen if you are unable to access Settings in order to enter safe mode.

  1. When you get to the Windows sign-in screen, hold down the Shift key while selecting the PowerRestart option. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  2. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in safe mode by selecting4orF4. Alternatively, if you may need to connect to the internet, choose5orF5for Safe Mode with Networking.

Remember that if you’ve encrypted your device, you’ll need your BitLocker key in order to boot into safe mode.

You must first access the Windows Recovery Environment (WRE) before you can boot into safe mode (winRE). To accomplish this, you will need to continuously switch your device off and then back on:

  1. If you want to switch off your device, press and hold the power button for 10 seconds. To turn on your smartphone, press the power button a second time. Hold down the power button for 10 seconds when you see the first indication that Windows has begun (for example, some devices display the manufacturer’s logo when resuming) to switch off your device. To turn on your smartphone, press the power button a second time. Keep holding down the power button for 10 seconds after Windows has restarted in order to switch off your device. To turn on your smartphone, press the power button a second time. To enter winRE, allow your device to restart into Automatic Repair mode and then choose Advanced options from the menu bar.

The following steps will guide you through the process of entering safe mode while you are in winRE:

  1. Advanced options may be found on the Choose an option screen by selecting TroubleshootAdvanced options. Preferences for the first time After your device has restarted, you’ll be presented with a menu of alternatives. Safe Mode with Networking may be accessed by selecting option5 from the list or by pressing F5.

To learn more about troubleshooting a black or blank screen issue, read Troubleshooting black or blank screen errors (PDF).

  1. To enter the Settings menu, press the Windows logo key plus I on your keyboard. If it doesn’t work, try selecting the Start button, then selecting Settings
  2. Then selecting UpdateSecurityRecovery from the drop-down menu. Open the Recovery Configurations
  3. Select Restart now from the Advanced startup drop-down menu. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  4. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in Safe Mode by selecting4or pressingF4. Alternatively, if you will be need internet access, select5or pressF5for Safe Mode with Networking

You can restart your device from the Windows sign-in screen if you are unable to access Settings in order to enter safe mode.

  1. When you get to the Windows sign-in screen, hold down the Shift key while selecting the PowerRestart option. When your computer restarts and you are presented with the Choose an optionscreen, click TroubleshootAdvanced choices. Startup PreferencesRestart the computer. You may be prompted to input your BitLocker recovery key
  2. Once your computer has restarted, you’ll be presented with a menu of alternatives. Start your computer in safe mode by selecting4orF4. Alternatively, if you may need to connect to the internet, choose5orF5for Safe Mode with Networking.

Remember that if you’ve encrypted your device, you’ll need your BitLocker key in order to boot into safe mode. You must first access the Windows Recovery Environment (WRE) before you can boot into safe mode (winRE). To accomplish this, you will need to continuously switch your device off and then back on:

  1. If you want to switch off your device, press and hold the power button for 10 seconds. To turn on your smartphone, press the power button a second time. Hold down the power button for 10 seconds when you see the first indication that Windows has begun (for example, some devices display the manufacturer’s logo when resuming) to switch off your device. To turn on your smartphone, press the power button a second time. Keep holding down the power button for 10 seconds after Windows has restarted in order to switch off your device. To turn on your smartphone, press the power button a second time. Allow for a complete reset of your device. You will be able to enter winRE

The following steps will guide you through the process of entering safe mode while you are in winRE:

  1. Advanced options may be found on the Choose an option screen by selecting TroubleshootAdvanced options. Preferences for the first time After your device has restarted, you’ll be presented with a menu of alternatives. Safe Mode with Networking may be accessed by selecting option5 from the list or by pressing F5.

To learn more about troubleshooting a black or blank screen issue, read Troubleshooting black or blank screen errors (PDF). Remember that restarting your device should be sufficient to get you out of Safe Mode and back into regular operation. In the event that for some reason your system continues to boot into Safe Mode on its own after restarting, attempt the following steps:

  1. Enter msconfig in the Openbox by pressing the Windows logokey plus R
  2. Then click OK. Select the Boot tab from the drop-down menu. Clear the Safe boot checkbox in the Boot settings section.

How to boot into Windows 10 safe mode

(Photo courtesy of Microsoft) Unidentified problems causing your computer to be unresponsive? Learning how to boot into safe mode in Windows 10 should be the next item on your to-do list after that. When troubleshooting computer difficulties, booting into safe mode may be quite beneficial. Safe mode is a fundamental state in which only a minimal collection of files and drivers are used. It may be used to narrow down the cause of the problems with your device.

  • Learn how to utilize Windows 10 like an expert by watching this video. The greatest laptops in the world, listed 5 simple methods for upgrading your gaming computer
You might be interested:  How To Print Screen On Windows 10

If, for example, your computer is frequently crashing and when you boot it into safe mode, the problem does not recur, you can be certain that it is not the default settings and basic drivers that are causing the crashing to occur. You may also use Safe Mode to troubleshoot problems with your Windows 10 device that are operating incredibly slowly or won’t even start up at all. It will assist you in identifying the root of the problem and is one of the first measures you can take to restore your PC to its previous state of operation.

If you’re not sure how to boot into safe mode on Windows 10, you’ve come to the right place.

How to boot into Windows 10 safe mode from settings

(Photo courtesy of Microsoft) You can boot into safe mode from the Settings Menu if you have full access to your device’s desktop and are able to do so from the Settings Menu.

  1. Settings may be accessed via the Start Menu or by hitting the Windows key and I key combination. The Settings Menu is extremely easy to get from the Start Menu, which is placed on the toolbar
  2. Simply click the Windows logo in the upper-right corner and then seek for the small cog symbol in the lower-right corner. If you prefer, you may bring up the Settings Menu by pressing Windows + I. To access the Updates and Security menu, go to the Settings menu and choose it. Updates and Security are located in the Settings Menu, however if you are unable to discover it, there is a search bar that you may use to locate it
  3. To access the Recovery tab, navigate to the Updates and Security menu and choose it. The Recovery tab may be found on the Updates and Security Menu’s left-hand column, under the Updates and Security heading. If you’re having trouble locating it, try using the search box on the right. Select Restart Now from the Advanced startup drop-down menu. To restart your computer, click the Restart Now option, which is available under the Advanced start-up heading. Ensure, though, that you have saved whatever work you were doing prior to this. Select Troubleshoot
  4. Then select Advanced options
  5. Then select Startup Settings
  6. Then select Restart to complete the process. You’ll be presented with a “Choose an option” menu when your device has restarted
  7. Proceed as described above, selecting Troubleshoot first, then Advanced options second, startup settings third, and then restart to complete the process. This will cause your device to restart once again. From the Startup Settings menu, press the F4 key. Following the restart of your Windows 10 device, you’ll be presented with a numbered list of alternatives, of which you desire option number 4. This will cause your computer to boot into safe mode. If you require networking capabilities in safe mode (i.e., the ability to connect to the internet), press F5 instead
  8. Otherwise, press F8.

How to boot into Windows 10 safe mode from the sign-in screen

(Photo courtesy of Microsoft) The fact that you are unable to access your desktop and, consequently, are unable to boot into safe mode via the settings menu, is not a significant problem. Here’s how to get to safe mode from the sign-in screen on your computer:

  1. Press and hold the shift key while selecting Power and Restart from the drop-down menu. Hold down the shift key and, while doing so, press Power (the button on the screen, not the real power button on your device) to force the device to restart
  2. Troubleshooting options may be found by selecting Troubleshooting options and Advanced options. Select Startup Settings, then Restart your computer. You’ll be taken to the “Choose an option” screen once your device restarts. To get there, follow these steps: first, choose Troubleshoot, then Advanced options, then startup settings, and finally restart. In the next moments, your device will restart
  3. When the Startup Settings menu appears, press the F4 key. After your Windows 10 device has restarted, you’ll be presented with a variety of alternatives
  4. You want to pick option number 4, which you can accomplish by pressing the F4 key. This will cause your computer to boot into safe mode. If you require networking capabilities in safe mode (i.e., the ability to connect to the internet), press F5 instead
  5. Otherwise, press F8.

How to boot into Windows 10 safe mode from a blank screen

If your computer is in a horrible state and you can’t even get beyond a blank screen (or if it has fully crashed), there is still a method to boot into safe mode with networking.

  1. Hold the power button down for a total of 10 seconds. Locate the physical power button on your smartphone and press and hold it for a total of 10 seconds
  2. Then press the power button again to confirm. Following a complete power down of the device, press and hold the power button for 10 seconds. When the device powers back up, press and hold the power button for 10 seconds once again. When you see an indicator that your device is powering up, for example, some devices will display a manufacturer logo when they first start up, press and hold the power button for 10 seconds, which will turn your device off
  3. Repeat steps 2 and 3 a second time. Once again, turn on your smartphone and, as soon as it begins to wake up, press and hold the power button for 10 seconds to turn it off completely. Press the power button once more, this time enabling your device to complete a complete restart of its operations. After completing steps 2 and 3 times more, you should press the power button a third time to allow your device to fully power up. Entering the Windows Recovery Environment (winRE) is what you should do at this point. Select Troubleshoot
  4. Then select Advanced options
  5. Then select Startup Settings
  6. Then select Restart to complete the process. Follow these actions after your device has powered up: first, choose Troubleshoot from the menu, then Advanced options, then startup settings, and finally Restart to complete the process. After that, your device will restart if you press the F4 key while in the Startup Options screen. After your device has restarted, you’ll be presented with a range of alternatives to choose from. You want to pick option number 4, which can be accomplished by pressing F4. This will boot you into safe mode. Alternatively, you may hit F5 to start your computer in safe mode with networking capability.

How to leave Windows 10 Safe Mode

As a result, when you’re through with Safe Mode, exiting is simple. It’s as simple as restarting your computer:

  1. Select Power from the Start menu, then Restart from the Power menu. You will be back to the default Windows 10 environment.

More Windows 10 tips

Learn how to locate your Windows 10 product key, how to encrypt files on Windows 10, how to set up Windows 10, how to enable bluetooth on your computer, how to capture and record a screen on your computer, how to update drivers on your computer, how to factory reset on your computer, how to speed up your computer, and how to reinstall your computer’s operating system on a new hard drive or a new operating system on a new hard drive or a new operating system on a new hard drive.

Rory is a writer for Tom’s Guide who is located in the United Kingdom.

He is also a published author.

How to enter safe mode in Windows 10 – ThinkPad – Lenovo Support HN

+Lenovo Facts and Figures

  • Information about our company, news, investor relations, sustainability, product compliance, product security, Lenovo Open Source, legal information, and job opportunities.

Shop

  • LaptopsUltrabooks
  • sTablets
  • sDesktopsAll-in-Ones
  • sWorkstations
  • sAccessories Software, servers, storage, networking, laptop deals, and an outlet are all available.

Support

  • Resources for Imaging and Security
  • How-Tos
  • Warranty Lookup
  • Parts Lookup
  • Contact Us
  • Repair Status Check
  • Imaging and Security
  • DriversSoftware

Resources

+Resources

  • The following sections are available: Where to Buy, Shopping Assistance, Sales Order Status, Product Specifications (PSREF), Blogs, Forums, Registration, Product Accessibility, Environmental Information, Gaming Community, LenovoEDU Community, LenovoPRO Community, and LenovoPRO Community

How to start Windows 10 in Safe Mode and then exit later

  • A feature of Windows 10 called Safe Mode allows you to boot your computer into a state where most of its non-essential capabilities are deactivated. It is recommended that you boot into Safe Mode when you are debugging a problem or when Windows 10 would not start properly. For instructions on how to exit Safe Mode, go to the “Boot options” menu or just restart your computer. More stories may be found in Insider’s Tech Reference collection
  • Click here.

Safe Mode is a feature that is included in nearly every version of Windows. This allows you to start your computer with only the files and drivers that are absolutely necessary for it to function – most unnecessary features will be disabled, and programs will run more slowly as a result. By default, you will not even have access to the internet. Safe Mode, on the other hand, is not intended to be utilized on a regular basis. It is necessary to utilize Safe Mode when your computer is not functioning properly or when it will not begin to boot up at all.

Here’s how to start your computer in Safe Mode and then exit it when you’re finished.

How to boot in Safe Mode in Windows 10

There are several methods for entering Safe Mode, however the following are the three simplest.

Using the Power icon

If you’re logged in, you may do the following: 1.Click on the Windows symbol in the lower-left corner of the screen. 2.While holding down the Shift key, choose the Power symbol and then select Restart from the menu. While pressing the “Restart” button, keep the Shift key pressed. Insider photo courtesy of William Antonelli 3. You will be presented with a blue screen titled Choose a choice when your computer has restarted. SelectTroubleshoot, followed by Advanced options to complete the process.

  1. Dave Johnson of Business Insider has contributed to this article.
  2. Start by selecting Startup Settings and then Restarting your computer.
  3. When you arrive to the final selection menu for Safe Mode, pick “Startup Settings” and then click Restart to go to the next screen.
  4. When the screen returns, you’ll be presented with a number of alternatives.

Safe Mode may be used with or without internet connectivity. Insider photo courtesy of William Antonelli If you aren’t already logged in, follow the steps above but instead click the Power symbol on the sign-in page.

Using the Settings app

1.Open the Settings application by hitting the Windows key + I simultaneously. 2.Click on UpdateSecurity, followed by Recovery. 3.On this page, beneath the heading Advanced startup, select the button labeled Restart now. To enter Safe Mode, select “Restart immediately” from the menu bar. Dave Johnson of Business Insider has contributed to this article. Upon restarting, your computer will display the Choose an option screen. In this section, selectTroubleshoot and then Advanced options. Start by selecting Startup Settings and then Restarting the computer.

Alternatively, press4 to boot your computer into Safe Mode, or5 to boot your computer into Safe Mode with internet access.

Holding down the power button

If you are unable to boot into Windows normally, this is the procedure to follow. 1.To turn on your computer, press the power button on the keyboard. Keep holding down the power button until you see anything on the screen — most likely the manufacturer’s emblem — at which point the computer will shut down. Turn on your computer once you have completed this step three times. Towards the bottom of the screen, the wordsPreparing Automatic Repairwill display as the process gets underway. Continue to allow your computer to go through this procedure; it should ultimately boot into the Choose an option screen.

Insider4 photo courtesy of William Antonelli.

When asked, select the option to Restart.

6.

How to exit Safe Mode

Exiting Safe Mode can be accomplished in one of two ways. The first — and most straightforward — solution is to just restart your computer. This may be accomplished by pressing and holding the power button or by selecting it from the Start menu. If you’ve rebooted your computer but it’s still in Safe Mode, you should do one of the following things. 1.To enter the Run menu, press the Windows key + R at the same time. 2.In the text field, typemsconfigand hit the Enter button. In Safe Mode, the Run command should still be accessible.

  • 4.UnderBoot settings, make sure that the Safe boot option is not selected.
  • The menu that you are searching for should look somewhat like this.
  • Business Insider photo courtesy of Ross James Tech Reference’s William Antonelli is the editor and a staff writer.
  • A founding member of the Reference team, he has contributed to the growth of Tech Reference from its humble beginnings into a behemoth that receives more than 20 million visits every month.
  • On news networks such as Newsy, Cheddar, and NewsNation, he is also a go-to source for technology insight.
  • Dave Johnson is a free-lance writer based in New York City.
  • Dave grew up in New Jersey before joining the Air Force, where he worked as a satellite operator, space operations instructor, and space launch planning specialist.
  • A photographer who has shot wolves in their natural surroundings, Dave is also a dive instructor and the co-host of many podcasts, all of which can be found on his website.

Besides being the author of more than a dozen books, Dave also contributes to a variety of websites and magazines such as CNET, Forbes, PC World, How To Geek, and the Insider magazine. Ross James is a Business Insider contributor who works as a freelance writer.

How to start Windows 10 in Safe Mode – 4 different methods (with screenshots)

Safe Mode is a method of running Windows in its most minimal configuration. It only makes use of files and drivers that are strictly necessary. As an example, your screen will display just 16 colors and a very poor quality when you are in Safe Mode, and you will be unable to print documents or listen to music when in this mode. Additionally, it will not run many apps in the background. Safe Mode is a mode of operation meant to assist you in troubleshooting computer problems. Safe Mode will be launched automatically on occasion by Windows 10.

if it has a problem loading normally).

if you get a blue screen error every time you start Windows).

4 ways to start Windows 10 in Safe Mode

  1. Initiate Safe Mode by hitting the F8 key on your keyboard at startup
  2. Start Safe Mode by shutting off your computer three times. Safe Mode may be activated using the System Configuration utility. Safe Mode may be accessed from the login screen. Are you unable to resolve the issue? Try this workaround.

Method 1: Start Safe Mode by pressing F8 at startup

NOTICE: This approach must be activated manually from inside Windows in order to work. If you haven’t previously done so and are unable to access Windows in order to do so, proceed to step 2 further down.

You might be interested:  How To Change Time On Windows 10

First, you have to enable the F8 key method

When Windows 7 was first loading up, you could reach the Advanced Startup Options menu by pressing the F8 key during the boot process. Safe Mode might be accessed from this location. The F8 key approach, on the other hand, is not functional by default in Windows 10. You must manually activate it in order to use it. Learn how to access Safe Mode using the F8 key in Windows 10 by following these steps: 1) Go to the Windows start menu and type cmd, then selectRun as administrator from the drop-down option: 2) Copy and paste the following command:bcdedit /setbootmenupolicy legacy into your terminal: Copy the command from your clipboard and paste it into the Command Prompt (right-click on the Command Prompt to paste it), then press the Enter key on your keyboard.

4) Restart your computer.

Now you can start Safe Mode using the F8 key

Following the completion of the F8 method configuration, you may use it to launch Safe Mode: 1) Make certain that your computer is switched off. 2) Start your computer by pressing the power button. Press F8 continuously until the Boot Options menu shows at the bottom of your screen before anything else appears. Then select Safe Mode from the drop-down menu. If the Boot Options menu shown above does not appear and Windows instead begins normally, it is probable that you did not hit F8 at a sufficiently early stage in the boot process.

Method 2: Start Safe Mode by turning off your PC 3 times

If you are unable to start Windows and you have not activated the F8 approach described above, the following is how to start Safe Mode with Networking: 1) Make certain that your computer is switched off. 2) Turn on your computer by pressing and holding the power button until you see a little spinning circle of dots, which shows that Windows is beginning. Then press and hold the power button until your computer shuts down. You’ll have to hold it for around 4-5 seconds to make it work. Repeat the process a second and third times.

It should now enter Automatic Repair mode as follows: 3) Wait for Windows to complete a diagnosis of your computer: 4) Select Advanced Options from the drop-down menu: 5) ClickTroubleshoot to see if there is a problem.

Your computer will restart and display a menu with a number of alternative launch choices to choose from.

The following steps will guide you through the process of booting into Safe Mode using the System Configuration tool: 1) From the Windows start menu, type msconfig, and then click Open: 2) Select the Boottab and then select the Safe boot box before clicking OK.

You will boot into Safe Mode after clicking Restart when you are requested to restart your computer in order to implement these modifications.

To turn off Safe Mode and go back to normal mode

When you wish to restore Windows to its default configuration, all you have to do is undo your changes: 1) From the Windows start menu, type msconfig, and then click Open: Select the Boottab and uncheck the Safe boot option before clicking OK. 2) When requested to restart your computer in order to implement these changes, selectRestartand your computer will boot into regular mode. 3)

Method 4: Start Safe Mode from the login screen

If you are able to boot up to the login screen, you may then enter Safe Mode by following these steps: Keep the Shift key pressed on your keyboard as you read this. To restart your computer while holding down the Shift key, click the power button in the bottom right corner of the screen and then selectRestart. Following that, the Windows RE (Recovery environment) interface will appear. 3) ClickTroubleshoot to see whether there is a problem. 4)Click on the Advanced Options button: 5) Select Start-Up Preferences from the drop-down menu: 6) Press the Restart button.

7) To enter Safe Mode without internet connectivity, hit the number4 key on your keyboard; to enter Safe Mode with internet access, press the number5 key:

Can’t solve the problem? Try Driver Easy.

If you were unable to resolve your computer problem in Safe Mode but were still able to run Windows normally, Driver Easy may be worth a try. In many cases, outdated device drivers are the root cause of computer malfunctions. In order to avoid this, upgrading your drivers should always be one of the first solutions you try. The free Driver Easy software will automatically update all of your device drivers to the most recent right version with only a few clicks on your computer. You may rest assured that it will detect your system and find the appropriate drivers for it.

  1. Driver Easy is available in two versions: the FREE version and the Pro version.
  2. The Pro edition, on the other hand, requires only two clicks (and comes with full support as well as a 30-day money back guarantee): 1) Download and install Driver Easy on your computer.
  3. 2) After that, Driver Easy will scan your computer and identify any problematic drivers.
  4. Alternative: ClickUpdate Allto have all of the drivers that are either missing or out of current on your system automatically downloaded and installed (this needs thePro version, which you will be offered to upgrade to when you click Update All).

6 Ways To Boot Windows 10 Into Safe Mode

No matter if you have screwed up your Windows settings or if you are unable to use the system due to a virus, Windows safe mode is your best option for resolving any of these issues. While operating in safe mode, Windows begins with the bare minimum of drivers and services, and no third-party applications are loaded. This assures that no troublesome software is loaded, allowing you to concentrate on solving the problem without interruption. When an issue occurs, however, accessing safe mode becomes a significant difficulty.

Or, even worse, you are unable to launch Windows at all?

As a result, in this post, I will demonstrate six different methods for accessing Windows 10 safe mode, ensuring that you always have access to safe mode no matter what happens.

1.Access safe mode from Windows 10 Settings

This is the most popular technique of accessing safe mode when you are able to run the system and access the settings on the computer. Here’s how you go about it: From the Start menu, select WindowsSettings and then click on UpdateSecurity. In the left panel, select theRecovery option, and then select theRestart nowbutton under theAdvanced startupsection in the right panel. Windows will restart and the Windows Recovery Environment will be shown (WinRE). TroubleshootAdvanced options can be found here.

Your computer will restart and display a page with a variety of instructions from which you may pick.

2.Use a Command prompt command

Alternatively, if you can only reach the Command prompt, you may execute a command that will restart the computer into the Windows Recovery Environment, from which you can access safe mode. To launch the Command prompt on Windows 10, hit the Windows+R keys together to bring up the Run dialog box, and then type cmdhere to bring up the Command prompt. You must now run shutdown.exe /r and click the Enter key to complete the process. A brief wait may cause Windows to resume into the Windows Recovery Environment, from which you can access safe mode by following the steps outlined in the preceding procedure.

3.Access safe mode from the sign-in screen

Alternatively, you can boot into safe mode from the sign-in page if you are unable to sign in for any reason. All you have to do is click on the Powerbutton located in the bottom-right corner of the screen, while simultaneously holding down the shift key and clicking on the Restartbutton. This will cause the computer to restart, and you will be sent to the Windows Recovery Environment. From this point on, you can access safe mode by following the steps in the first manner. Please keep in mind that you may also utilize this approach while still in Windows by holding down the Shift key when restarting your computer from the Start menu.

4.Enable Safe mode in System Configuration

This is a more permanent option for reaching safe mode, but it may be useful for ensuring that you restart your computer frequently and that you always enter safe mode. You may compel the PC to start in safe mode every time it is restarted by changing the settings under System configuration. And once you’ve finished troubleshooting the issue, you may turn off this feature to restore regular Windows functionality. Here’s how you go about it: To access the Rundialog, press the Windows+R keys together, then typemsconfighere to activate the System Configuration window.

To undo the modifications, repeat the previous steps while in safe mode, but this time uncheck the option next to “Safe boot.”

5.Force Windows to enter WinRE

You may also force Windows to boot into the Windows Recovery Environment, which will allow you to access safe mode if necessary. The usage of this approach should only be reserved for emergency situations in which Windows is unable to boot properly. In any other case, this approach may cause damage to your Windows. If Windows fails three times in a row, it will automatically boot into the WinRE recovery environment. So, if you’re having difficulties launching Windows, you may also pretend to crash Windows in order to open WinRE and resolve the problem.

Repeat this procedure up to two more times, and Windows will automatically boot into the Windows Recovery Environment the next time it is used. Follow the instructions in the first way to access safe mode after you have reached this point.

6.Use a Windows 10 bootable USB or disk

In the event that you have your Windows 10 installation CD or a bootable Windows 10 flash drive on hand, you may use it to boot into safe mode. The only time you will need to use this approach is if Windows has become corrupted to the point that it is impossible to load at all, even if the force shutdown option has been attempted. If you don’t already have a bootable drive with you, you may quickly make one using the Windows 10 media creation tool, which is completely free of charge. To complete the task, you will just require another computer and a USB drive with at least 8GB of empty space.

Once you’ve created a bootable drive, just insert it into your computer and start it up from there.

You may then click on theRepair your computerbutton at the bottom-left corner of the window to launch the Windows Recovery Environment once you have completed the process.

So all you have to do now is enter safe mode from this location (see method1), and your corrupted Windows will start up in safe mode automatically.

Bonus method

This strategy is unlikely to work on the newest PCs that run UEFI and have SSDs as their primary storage device. Although it is perhaps the most difficult technique to reach safe mode, it should work if you have an ancient PC with a legacy BIOS and hard drive storage. If you were using Windows 7, you may enter safe mode by repeatedly pressing the F8or Shift+F8keys before the operating system booted up. But this strategy does not work on Windows 8.1 and Windows 10 since the hardware they come with is new, and their boot times are fast compared to older operating systems.

Although, if you have an old PC operating on a legacy BIOS and hard drive, it will be sluggish enough to detect keystrokes and start safe mode even on Windows 10.

It may be necessary to hold down the Shift key while continually hitting the F8 key if the previous method does not work.

Wrapping up

I am certain that these ways for accessing safe mode in Windows 10 will be sufficient no matter what difficulty you are experiencing. Regardless of whether or not you have access to Windows, one of these ways will work. Although, if you’re searching for the quickest way to boot into safe mode, I feel the third technique is the most expedient option. When you start your computer in safe mode, you don’t even have to log in; it works even when you are logged in.

If you still require assistance with the PC boot process, Tenorshare Windows Boot Geniussoftware may be of assistance. Find out how to deactivate NetBIOS via TCP/IP in Windows in the next section.

How to Start your Computer in safe mode in Windows 10

If your Windows 10 PC is not performing as intended, contact Microsoft Support. Is it possible that your computer has been infected with viruses or malware, or that you have installed an incorrect driver, which is causing Windows 10 to freeze or crash on occasion? If you find yourself in this situation, starting Windows 10 in safe mode may be beneficial in diagnosing and correcting the problems with your computer. We’ve compiled a rundown of the several methods for entering Safe Mode in Windows 10, whether you’re booting up or restarting the machine.

What is safe mode windows 10?

Safe Mode is a critical diagnostic tool that may be used to discover and resolve the causes of Windows 10 PC issues and errors. When you boot into safe mode, Windows 10 will only enable you to start up the most basic system apps and services throughout the booting process. That implies that when you start your computer in safe mode, the operating system will be launched with only the basic components, and many other non-essential drivers or services, such as video drivers, will be disabled, and the sound will be turned off.

Safe mode options are provided in three different flavors in Windows.

  1. Safe Mode with Networking
  2. Safe Mode without Networking
  3. Safe Mode with Networking With the help of the command prompt

When you start your computer in Safe Mode, just the most basic setup is loaded. You will be presented with a dark desktop, and any unwanted apps, drivers, or services will not be launched during the startup process. That is, it makes your computer safer by blocking the spread of potential malware or viruses that may be sent by third-party software, drivers, or local networks. Because the basic Safe Mode disables network connectivity, if you need to use your computer to access the internet or other devices on a shared network while in Safe Mode, you’ll want to choose “Safe Mode with Networking.” If you don’t need to use your computer to access the internet or other devices on a shared network while in Safe Mode, you can choose “Safe Mode without Networking.” Your computer will display a large command prompt window if you select to boot into Safe Mode with Command Prompt when you first boot into Windows 10.

How To Start Windows 10 into safe mode

To start Windows 7 in safe mode, just hit the F8 key and select safe mode boot from the drop-down menu. Starting Windows 10 in safe mode, on the other hand, is a little different. “How to Boot into Safe Mode in Windows 10 and 8.1” PCs is the topic of this article. Safe mode may be accessed in a variety of ways depending on your Windows version. During the boot process of Windows 7, you may visit the Advanced options page by pressing the F8 key on your keyboard. And from here, you may access safe mode, safe mode with networking, and safe mode with command prompt by using the up and down arrow keys.

However, because the boot operation in Windows 10 and 8.1 is much quicker than ever before, the F8 key does not function. On Windows 10, you may reach safe mode in a variety of methods, including the following.

Can we get F8 work again on windows 10?

The F8 boot menu option is disabled by default in the most recent versions of Windows 10 and 8.1, but the good news is that we can enable the f8 safe mode boot menu feature using the Boot Configuration Data (BCD) Edit command. How to make the Windows 10 safe mode boot menu accessible by pressing the f8 key?

  • Search for cmd in the Start menu, right-click on the command prompt, and select Run as administrator from the context menu
  • To activate the f8 safe mode boot menu in Windows 10, open a command prompt window and typebcdedit /setbootmenupolicy heritage. Then hit the Enter key to confirm the change. Once this is completed, restart your computer and click F8 to open the Boot Options menu before the boot menu shows. To start Windows in safe mode, use the up and down arrow keys simultaneously
You might be interested:  How To Activate Windows 10 For Free

Start Windows 10 in Safe Mode from Settings

In the event that you have already logged into your Windows 10 machine, you may use the sophisticated Startup tool to start Windows 10 in safe mode in order to identify any problems. The advanced starting tool can be accessed by following the instructions outlined below. Using the configurations:

  • To enter the Settings app, press the Windows key + I together. To install the Windows update, go to Start > Settings > Update and Security > Update Security. Select theRecoveryoption from the left-hand panel, and then clickRestart nowunderAdvanced startup to boot into Windows Recovery Environment.

Using the Start Menu In addition, you may hit and hold the Shift key on the keyboard when clicking the Start menu on Windows 10, which will open the Start menu. Then, from the Start menu, select Restart by clicking on the Power button. The Advanced Startup Screen will be displayed as a result of this action.

  • This time, though, a menu of possibilities will be displayed
  • “Troubleshoot” “Advanced options” “Startup Settings” “Restart” are the alternatives to choose from.

Finally, you must press F4, F5, or F6 to select a preferred Safe Mode option in order to start Windows 10 in Safe Mode while the computer is loading up.

Start into Safe Mode when Windows won’t boot normally

If, however, Windows 10 is unable to start normally due to a problem, such as after installing an incompatible driver or third-party software, you may boot into safe mode and resolve the issue by following the instructions shown below. Making Use of Automatic Repair It basically works like this: If a Windows 10 machine fails to start normally three times, it will automatically enter into the Automatic Repair box and attempt to resolve the issue on its own. Well If the Automatic Repair failed to resolve your Windows 10 PC issues, proceed to the Advanced alternatives section.

Finally, hit the F4 key to start Windows 10 in Safe Mode, or the F5 key to start Windows 10 in Safe Mode with Networking (if applicable).

  • Do not bother with the first screen, which asks you to select a keyboard layout. Afterwards, select Repair your Computer from the drop-down menu.

From here on out, Select ‘Troubleshoot’ from the drop-down menu. ‘Advanced choices’ are those that are more complex. Startup Options’Restart’ is the command to use. and then press one of the following keys: F4, F5, or F6 to select a chosen Safe Mode option.

Start Windows 10 in Safe Mode Using System Configuration tool

In addition, you may utilize the system configuration tool to start Windows 10 in safe mode by following the procedures outlined in the following section.

  • Press the Windows key + R, enter msconfig, and then press the OK button. The System Configuration panel will be shown as a result of this action. Move to the boot tab and make sure the Safe Boot option is selected underneath the Boot choices (see to the image below).

You will find four radio buttons on this page.

  • Starting Safe Mode with the bare minimum of drivers and services, as well as the conventional Windows GUI (Graphical User Interface), is the Minimaloption. Safe Mode with a Command Prompt is launched instead of the Windows graphical user interface (GUI). It is necessary to be familiar with complex text commands as well as the ability to navigate the operating system without the use of a mouse. In Safe Mode, Active Directory Repair provides access to machine-specific information, including as hardware models, to repair the Active Directory database. Using Safe Mode, we may restore system stability by either correcting faulty data or adding new data to the Active Directory if we fail to properly install new hardware, causing the Active Directory to become corrupted. Safe Mode is activated by selectingNetwork, which brings up the usual Windows graphical user interface (GUI) and all of the essential networking services and drivers.

Let’s choose the Minimal option and then apply it and then OK it. System Configuration will now inquire as to whether you wish to restart your computer. Selecting Restart will instantly begin the restart process, so be careful to save any currently open documents or projects before selecting this option.

How to get out of Windows Safe Mode

If you have started Windows 10 in safe mode using the F8 key or via the advanced starting settings, this will only start your machine in safe mode for the first time; subsequent restarts will result in Windows 10 booting up normally. However, if you have launched Windows 10 in Safe Mode using the System Configuration wizard, this will cause your computer to boot into safe mode every time you turn it on.

To exit Windows safe mode, uncheck the safe option mode checkbox in the System Configuration tool, and then restart your computer. Let’s see what we can do.

  • Using Win + R, enter the command msconfig and click Enter
  • This brings up the System Configuration window. Select the Boot tab from the drop-down menu. Uncheck the Safe boot option if it is currently selected. Then restart your computer.

Also, have a look at

  • Identifying and resolving Blue Screen of Death issues in Windows 10
  • Windows 10 will not shut down after an update? Here’s How To Make It Right
  • Resolve the issue with Windows Explorer crashing and not responding
  • Stuck on the Welcome Screen in Windows 10? Here are 5 effective techniques to get rid of it
  • The Disk is Write Protected Error for USB Flash Drive in Windows 10 can be resolved by following these steps: The Loading Profile screen in Microsoft Outlook is stuck. Here’s how to get it fixed

Please report this advertisement.

3 ways to boot into Safe Mode on Windows 10 version 21H2

Safe Mode is a built-in troubleshooting tool that disables superfluous drivers and programs during the starting process in order to provide a more stable operating system. Window’s Safe Mode loads the operating system with only the bare minimum of system files and device drivers, which are only sufficient to boot the Windows operating system. Startup applications, add-ons, and other such items do not execute when the computer is in Safe Mode. When we need to debug a problem or solve a startup problem, we often boot into Safe Mode first.

Different Types Of Safe Mode

Safe Mode is available in a few different flavors on Windows 10, and it’s crucial to know which one you’re looking for before you start using it.

  1. This is the most basic version of Windows, which removes all extraneous programs and just auto launches a few selected files and drivers to get the system up and running from the beginning. The lack of many sophisticated functions, such as connections with other computers or devices, makes it incompatible. Because of this, the machine is protected against malware that may be able to spread across local networks. Safe Mode with Networking: This is a mode that automatically installs the drivers and functionality that are required to connect to networks. Despite the fact that it is not nearly as safe, it is handy if you just have one computer and need to access online to ask for help or to check if connections to other devices are still functional. Using Safe Mode with Command Prompt: Although this option may not be accessible on all versions of Windows 10, you may use it to bring up a large command prompt screen if it is available to you. For more severely damaged operating systems or technical tasks where you know the particular command lines required to locate a problem or run a certain service, this is a suitable option.

How To Boot Into Safe Mode On Windows 10

You may reach the Safe mode boot option on Windows XP and Windows 7, just by pressing the F8 key during the starting process. Although you may still press F8 while your computer is booting up to access advanced startup choices such as Safe Mode, this is no longer possible with Windows 10. Everything changed with the release of Windows 8 and Windows 10. Listed here are several possible methods for booting into safe mode on Windows 10 and Windows 8.1. Additionally, by hitting F8, you may restore the previous boot choices screen.

go to this stage

Using System Configuration Utility

The safe mode boot option may be accessed from the System configuration settings menu if you are able to start Windows in a regular manner.

  • To open System Configuration Utility, press Windows + R, typemsconfig, and then press OK. Safe boot is selected in the System Configuration window by selecting the boot tab from the drop-down menu.

You can select from a variety of extra choices.

  1. MINIMAL: This option starts Safe Mode with the absolute bare minimum of drivers and services, but with the usual Windows GUI (Graphical User Interface). Safe Mode with a Command Prompt is launched instead of the Windows graphical user interface (GUI). It is necessary to be familiar with complex text commands as well as the ability to navigate the operating system without the use of a mouse. Protective mode with access to machine-specific information such as hardware models is activated when Active Directory Repair is performed. Using Safe Mode, we may restore system stability by either correcting faulty data or adding new data to the Active Directory if we fail to properly install new hardware, causing the Active Directory to become corrupted. Network:Starts Safe Mode with the required services and drivers for networking, as well as the conventional Windows graphical user interface (GUI).
  • By default, pick minimum and press Apply
  • The system settings will prompt you to restart your computer. When you restart Windows, this will cause the computer to go into safe mode on the following boot.

How to leave safe mode windows 10

Following the completion of the Troubleshooting procedures, you can exit safe mode with Windows 10 by following the instructions listed below.

  1. If you want to get back into standard Windows, access the system configuration usingmsconfig. Alternatively, navigate to the boot Tab and uncheck the safe boot option
  2. Click apply and ok to preserve your changes and restart Windows to boot into standard Windows

Using Advanced Startup Options

The quickest and most straightforward method of booting Windows 10 into Safe Mode is to hold down the Shift key and then click on Restart. When you do this, your Windows 10 machine will reboot into the Advanced Startup Options screen. Select Troubleshoot from the drop-down menu, followed by Advanced options. Additionally, you may access Advanced Startup options from the Start menu by selecting Settingsnear the bottom of the screen, followed by Update and Security choices. Select Recovery, then Advanced startup from the drop-down menu.

If Having Startup Problem

If you are experiencing a startup difficulty and are unable to log in, log in to a regular window. When trying to access safe mode in order to execute troubleshooting procedures, you will require an installation disc to do so. You may use this to access advanced boot settings and to boot into safe mode if necessary. You can make installation media with the aid of the Official Windows Media Creation Tool if you don’t already have any on hand. When you are finished with the installation DVD or bootable USB, just insert it into your computer and boot from the media.

As depicted in the figure below.

choose Troubleshoot -advanced options from the drop-down menu -click on Startup Settings -click on Restart Now.

Booting into safe mode is accomplished by pressing the number 4. To restart in Safe Mode with Networking, hit the ‘5’ key on your keyboard. To restart in Safe Mode with Command Prompt, hit the number six key on your keyboard. It will restart Windows and load the operating system in safe mode.

Enable F8 Safe mode boot on windows 10

Despite the fact that you now understand how to boot into safe mode using the system setup tool and Windows advanced options, you may still be hunting for the old Advanced Boot options that were available on Windows 7, Vista, and XP. Follow the procedures outlined below to enable the F8 safe mode boot option on Windows 10 and Windows 8.1. Create a Windows 10 bootable USB flash drive or DVD first, then insert it into your computer. Get away from it (change your BIOS boot device settings if necessary).

By selecting next now on the install now screen, you may bypass the first screen.

Now run the following command:bcdedit /setbootmenupolicy heritage to complete the process.

To exit the Command Prompt, type exit and hit Enter on your keyboard.

When your computer starts up for the first time, you may click F8 to bring up the Advanced Boot Options menu that was previously available in Windows 7.

It is possible to access the safe mode boot option and enable F8 safe mode boot on Windows 10 and 8.1 systems in several different methods, as shown below.

If you have any questions or comments concerning this topic, please leave them in the comments section below.

  • How to Make Windows 10 Show Hidden Files and Folders
  • How to Make Windows 10 Show Hidden Files and Folders
  • Windows 10 Blue Screen STOP: 0x000000ED is caused by an unmountable boot volume. Solved: When using the search function in Outlook 2016, the message “No results found” appears. How to Save the Images from the Windows Spotlight Lock Screen in Windows 10

Leave a Comment

Your email address will not be published. Required fields are marked *