How To Reset Hp Laptop Windows 10

Contents

How to Factory Reset a Windows Laptop

Every computer will face performance difficulties at some point in its lifetime. Fortunately, there are straightforward methods for resolving issues that do not necessitate contacting technical assistance. One of these methods is to do a factory reset on your computer in order to eliminate any spyware, boost its speed, or prepare it for a new user. In order to reset your laptop, you must first determine the operating system you are using and what procedures you must do. If you are running an operating system other than Windows, you may need to take additional steps to complete a full factory reset.

Windows 10 has made doing a factory reset a little more complicated than it was in earlier versions of the Microsoft operating system.

Other versions of Windows may be a little more difficult to work with and may need the creation of system backups.

Before you reset

It is suggested that you back up your system before making any changes, regardless of whatever operating system you are using. Even if you want to sale your smartphone or do not anticipate the need for a backup, it is a good idea to keep one on hand in case you need to reload files or transfer them to a new device in the future. You may also set up frequent backups so that you don’t have to be concerned about losing crucial data if your operating system fails to launch properly. Additionally, you may want to make certain that these backups are transmitted to a location other than your hard drive, such as cloud storage, just in case something goes wrong and your hard drive fails.

How do you factory reset an HP laptop with Windows 10?

There are two methods for gaining access to the reset option: 1.From the Start menu, select “Settings” from the drop-down menu. 2. This icon resembles a cog wheel, and it is the location where you will access all of the important settings on your laptop. In the search field, enter the word “reset.” 3.Once the results have been shown, select the “Reset this PC” option from the drop-down menu. Or. 1. Select Start from the Start menu. 2. Select “Settings” from the drop-down menu. 3.After that, select “Update and Security.” 4.Click on “Recovery” from the left-hand panel of the window that has just been opened.

  • Reset this PC
  • “Revert to an earlier build”
  • “Advanced”
  • “Reset this PC”

Note: For the vast majority of users, simply selecting “Reset this PC” should be sufficient to resolve any issues with their computer and to start again from the beginning. The term “Advanced” startup refers to the fact that you will be restarting your device from a backup that is stored on a disc or USB drive. Only individuals who have a special purpose to use “Go to an Earlier Build” should use this option, as it is not available to everyone.

For a fundamental reset, you will need to do the following: 6.Under “Reset this PC,” select “Get started” from the drop-down menu. 7.After that, you will have to decide if you want to keep your personal data on your computer or if you want to start over with a clean slate.

  • In accordance with your requirements, select either “Keep my files” or “Remove everything.”

It makes no difference whatever option you pick; all of your programs will be destroyed, and any settings will be reset to their default values. You will have to pick if you want a fully clean disk or whether you want to keep the laptop and are not intending on giving it away if you choose “Remove everything.” 10.If you are not going to maintain a device, select “Remove files and wipe the drive” from the drop-down menu. It will be considerably more difficult for a new user to gain access to your old data as a result of this.

You may receive a notice from Windows informing you that you have the option of restoring your operating system to an earlier version of the software.

It is possible that your laptop will take several minutes to complete this operation.

How do you factory reset an HP laptop with Windows 7 or 8?

Many laptops with Windows 7 or 8 pre-installed come with recovery discs, which allow you to access the operating system through your disc drive if something goes wrong. The process of getting started is quite straightforward. Simply place your recovery disk into the drive and you’re done. Ensure that you back up all of your information before proceeding with this procedure, though. Before doing a reset on Windows 8, you should check to see whether there is a recovery program that is contained within the Windows software rather than on a CD or other external media.

  1. If you do not have one of these items, you may still reset your computer by booting from a recovery disk.
  2. You may restore your computer to the state it was in when you originally acquired it by accessing a secret section of your hard disk.
  3. If you have any files that you don’t want to lose throughout the procedure, make a copy of them before starting.
  4. Keep in mind that any software you have installed on your laptop will also be removed from it throughout the process.

Reset a hard drive with Window 7 or 8

Several laptops that go with Windows 7 or 8 pre-installed have recovery discs, which allow you to access the operating system using your optical disc drive. It is rather simple to begin the procedure. Simply place your recovery disk into the drive and restart your computer. Ensure that you back up all of your files before proceeding with this procedure, though. It is recommended that you check to see whether there is a recovery program within the Windows software rather than on a CD before doing a system reset on Windows 8.

It is still possible to reset your computer from a recovery partition if you do not have either.

You may restore your computer to the state it was in when you first got it by accessing a secret section of your hard disk.

If you have any files that you don’t want to lose throughout the procedure, make a copy of them before beginning.

This can contain files, images, documents, and any other data that you don’t want to be removed from your computer’s hard drive or deleted completely. You should keep in mind that whatever software you have installed on your laptop will be deleted as well.

About the Author

In addition to writing for HP® Tech Takes, Daniel Horowitz is a contributor to the site. In addition to writing for USA Today, Digital Trends, Unwinnable Magazine, and other publications, Daniel is a New York-based author who has contributed to a variety of other media sites.

Popular HP Windows Laptops

Operating system Restores the original OS from HP. Restores the release to manufacturing (RTM) state of the currently installed version of Windows.
Drivers Restores the original drivers from HP. Only INF (setup information) based drivers are kept. Device applets installed outside of INF are discarded.
User data (picture, documents, music, videos, desktop shortcuts) Options to backup user data on separate disk or keep nothing. Options to keep user data or keep nothing.
Store apps (HP preinstalled) Built-in Store apps are reverted to factory state. Built-in Store apps are kept.
Store apps (User installed) All user-installed Store apps are discarded. All user-installed Store apps are discarded.
Desktop apps (HP preinstalled) All preinstalled desktop apps are reverted to factory state. All preinstalled desktop apps are reverted to factory state.Note:Keeps preinstalled antivirus program as default.
Desktop apps (User-installed) All user-installed desktop apps are discarded. All user-installed desktop apps are discarded.
Personalized Windows settings Personalized Windows settings are saved in the cloud through your Microsoft account.Note:For details, from the Desktop, search for and open. Personalized Windows settings are saved in the cloud through your Microsoft account.Note:For details, from the Desktop, search for and open.

How to factory reset an HP laptop if you’re planning to sell it or experiencing technical problems

  • If you want to restore an HP laptop to its original condition, you may do so by going into the Windows Settings application. You have the option of deciding whether you want the reset to wipe out all of your personal files or just Windows itself. If you are unable to launch your HP laptop, you may also use Windows Recovery in Safe Mode to restore it to its factory settings. More stories may be found in Insider’s Tech Reference collection
  • Click here.

Although you won’t need to factory reset your HP laptop on a regular basis, it’s a good idea to do so if you want to sell or give your laptop away, or if you’re experiencing very challenging technical difficulties. This is due to the fact that doing a factory reset will return your laptop to the state it was in when you initially unpacked it (though you generally have the option to keep your files and only reset Windows). In today’s world, you may use the usual Windows 10 reset technique to restore any laptop, even HP models.

How to keep your Windows drivers up to date to avoid a factory reset

Maintaining the most recent version of your computer’s drivers will help you avoid the need to reset your HP laptop for troubleshooting or to resolve a significant problem. The good news is that by default, Windows will automatically update many of the drivers on your laptop when they become outdated. However, there may be situations when drivers need to be updated manually by the user. You may accomplish this by using the Device Manager – to get started, click on the Start button and then select Device Manager from the list of available options.

  1. To update the driver, choose it from the context menu by right-clicking.
  2. Dave Johnson is a musician and songwriter from the United Kingdom.
  3. Dave grew up in New Jersey before joining the Air Force, where he worked as a satellite operator, space operations instructor, and space launch planning specialist.
  4. A photographer who has shot wolves in their natural surroundings, Dave is also a dive instructor and the co-host of many podcasts, all of which can be found on his website.

How to factory reset an HP laptop [Step by step]

If you are experiencing persistent system troubles with your HP laptop, factory resetting it may be a quick and effective solution. Alternatively, if you’ve purchased a new computer and wish to discard your old HP laptop, restoring the laptop to its factory settings is an excellent method of securely erasing personal data from the device.

This tutorial will walk you through the process of factory resetting your HP laptop step by step:

  • If you are able to get into your HP laptop regularly, you may do a factory reset of your HP laptop using the Windows Settings interface. It is possible to factory reset your HP laptop if you are unable to log into your HP laptop properly using the Windows Recovery Environment.

Bonus tip: How to keep your PC in peak operating condition

Method 1: Factory reset your HP laptop through Windows Settings

If you are able to get into your HP laptop properly, you may do a factory reset using the Windows Settings menu.

  1. The Windows Settings program allows you to do a factory reset on your HP laptop, if you can log in regularly.
  1. If you are able to get into your HP laptop properly, you may do a factory reset using Windows Settings.
  1. Alternatively, you may choose Only the disk where Windows is installed if you only want to delete everything from the drive where Windows is installed. Or All disks are selected if you wish to recycle your computer and eliminate all of the files from it. If you simply wish to delete your files, select “Just remove my files” from the drop-down menu. You may also choose to clear the drive by selecting Remove files and clean the disk
  2. Then selecting Reset and waiting for the reset procedure to complete, which may take some time. As soon as the factory reset process is complete, we have a Bonus tip for you in the last part
You might be interested:  How To Connect Powerbeats Pro To Windows 10

Method 2: Factory reset your HP laptop through Windows Recovery Environment

It is possible to factory reset your HP laptop using the Windows Recovery Environment if you are unable to log into your computer regularly. Take the following steps:

  1. It is possible to factory reset your HP laptop using the Windows Recovery Environment if you are unable to log into your laptop regularly. Steps to take include:
  1. If you are unable to log into your HP laptop regularly, you can do a factory reset using the Windows Recovery Environment. The following are the measures to take:
  1. If you are unable to log into your HP laptop regularly, you can factory reset your laptop using the Windows Recovery Environment. Follow these steps to get started:

Bonus tip: How to keep your computer in tip-top shape

You should make sure that all of your device drivers are up to date if you want to keep your computer running at peak performance. Manually updating your drivers is one option, while automated updating is another. Manually updating your drivers— You may manually update your drivers by visiting to the hardware manufacturer’s website and looking for the most recent driver version available. However, if you want to go this route, be sure that the driver you install is compatible with the precise model number of your device as well as the version of Windows you are running.

We take the guesswork out of knowing what operating system your computer is running, and we take the danger of installing the wrong driver and worrying about making a mistake during the installation process out of it.

  1. Driver Easy may be downloaded and installed
  2. Start Driver Easy and select the Scan Now option. Once this is completed, Driver Easy will scan your machine and identify any problematic drivers. Any highlighted devices may be updated automatically by clicking the Update button next to them, after which you can manually install the latest versions of their drivers. Alternatively, you may clickUpdate All to have them all downloaded and installed automatically. (This needs the Pro version, which you will be offered to upgrade to when you click Update All.) You will receive full assistance as well as a 30-day money back guarantee.

The Pro edition of Driver Easy includes access to comprehensive technical assistance. Contact Driver Easy’s support staff [email protected] if you have any questions or need assistance. Hopefully, this has been of assistance. As is often the case, please feel free to leave a comment below to discuss your findings or to provide any further ideas.

Top 2 Ways to Reset an HP Laptop Windows 10 without Password

When your HP ENVY, Pavalaptop, Elitebook, Essential, or Spectre laptop’s Windows 10 operating system becomes corrupted or infected by a virus, or when your hard drive becomes damaged, you may be prompted to enter the administrator password before the computer can be repaired through factory resetting. How would you go about bypassing the system limitation to restore your HP computer to factory settings if you happen to have lost or forgotten your login password, or if you happen to have a second-hand machine that has been password-protected?

Way 1: Factory Reset Password-protected HP Laptop Windows 10 with Troubleshoot Function

While Windows 7 requires users to provide a login password in order to get access to or factory reset their devices, users may do the same task with Windows 8/8.1/10 without having to enter a password at all. By omitting this step, restoring your HP laptop to its factory settings becomes significantly simpler. To understand how to reset your computer, simply follow the procedures outlined below. Step 1: From the Windows 10 login interface, click on the Power button, followed by the Restart button, while simultaneously pressing and holding down the Shift key to bring up the Troubleshoot options menu.

To troubleshoot, choose Troubleshoot. Select Reset your PC from the drop-down menu and then Next to allow the system to reset your HP laptop. The system will begin erasing all data from your computer and factory resetting your HP laptop if you choose Remove Everything in Step 3 of the process.

Way 2: Restore Your Windows 10 HP Laptop to Factory Settings by Removing Password First

It is possible that the first method will not work for every customer who has an HP laptop running Windows 10. It is necessary in this scenario to use other tools to assist you in regaining access to your computer. In this post, we strongly recommend that you utilize Windows Password Key to assist you in removing the login and admin passwords from your computer without having to use a reset CD before factory resetting your HP machine.

Part 1: Remove Your HP Laptop Password

Step 1: Download and install Window Password Key on a computer that is capable of performing its functions. After running the software, select “Browse” from the drop-down menu to locate the previously created Windows Password Key image file. Before beginning the procedure, you may opt to burn a reset disk on a CD/DVD or a USB flash drive by selecting “Burn” from the drop-down menu next to “CD/DVD.” After it is finished, click “OK” to remove the flash drive from the computer. Step 3: Insert the disk into your HP laptop, which has been encrypted with a password.

In the following step, the Window Password Key interface is presented to you.

Part 2: Wipe Your Win 10 HP Laptop to Factory Defaults

Following the removal of the administrator password from your HP laptop, you may begin the process of resetting it. Start with Step 1: Navigate to SettingsUpdatesecurityRecovery and choose “Get started.” Alternatively, you may choose either “Keep my files” and then “Reset” to delete everything from the computer except your personal files, or “Remove everything” to completely erase all of the data on your computer. Step 3: If you select “Delete everything,” you will be prompted to choose whether to remove everything from “Only the drive where Windows is installed” or “All drives,” and then to choose whether to “Just remove my stuff” or “Remove files and clean the disk” after selecting “Remove everything.” Then click “Reset” to confirm your decision and begin the reset process.

The Troubleshoot feature on your Windows 10 computer, or deleting your password using the Windows Password Key and then resetting your computer using the restore function on your computer, are both viable options for you.

Purchase Now ($29.95) Articles that are related The built-in Administrator account in Windows 10 cannot be used to use the Edge browser.

How to Recover/Reset Login Password on an HP Computer with UEFI Firmware commenting software powered by

How to factory reset an HP laptop? — Auslogics Blog

If nothing else works to address system problems on your HP laptop, you might want to consider restoring it to its factory settings. If that’s the case, you’ll be relieved that you came on this post. How to factory reset an HP laptop running Windows 10 will be covered in this tutorial.

When you are unable to boot into your system regularly, one of the techniques will walk you through the actions that must be taken. Choosing the alternative option will show you how to reset your laptop if you are having trouble logging into your computer.

Method 1: Using Windows Settings to Factory Reset your HP Laptop

You may do a factory reset on your laptop by going to the Windows Settings menu. The only time that this approach is available is when your machine can be successfully booted into normal operation. Following that, below are the procedures you must follow:

  1. Press the Windows Key+S combination on your keyboard. Enter the command “reset this PC” (without the quotation marks)
  2. Select Get Started from the right-hand navigation window. You have the option of keeping your data or deleting everything. When you wish to keep your own files, programs, and settings, choose Keep My Files from the drop-down menu. Then pick Reset from the Next drop-down menu. A new operating system will be installed, and your computer will restart as a result of this. Pick Remove Everything if you wish to completely delete all of your personal files, programs and customisation preferences
  3. Otherwise, select Restore Everything. You have the option of deleting all of the files from all of your drives or only the files from the disk where Windows is installed. You have the choice of removing only your files or deleting them together with the rest of the drive’s contents. The procedure will begin as soon as you click the Reset button. It is possible that it will take a long time to finish

Method 2: Using Windows Recovery Environment to Factory Reset your HP Laptop

Select Windows Key+S from your keyboard. Then press the Enter key after typing “reset this PC” (without quotation marks). Get Started may be found in the right-hand pane. The choice is yours whether to keep your data or delete them completely. To save your personal data, programs, and modifications, select Keep My Files from the File menu. Then pick Reset from the Next menu. Reinstalling your operating system and restarting your machine will take place. Removal of all personal data, applications, and personalization settings may be accomplished by selecting Remove Everything.

Simply deleting your files is one option, or you can choose to destroy them together with the rest of your data.

You should expect it to take some time to finish.

  1. Turn off your HP laptop computer. Remove any and all external devices (printers, USB drives, and so on) from your computer’s power supply. Remove any internal hardware that has been recently installed
  2. To turn on your HP laptop, press the Power button on the keyboard. As soon as your machine begins to boot, hit the F11 key on your keyboard. It must be pressed several times before the Choose an Option screen appears. Select Troubleshoot from the drop-down menu. Select Reset this computer from the drop-down menu. You have the option of either keeping your data or deleting everything. When you wish to keep your data, choose Keep My Files from the drop-down menu. Your operating system will be reinstalled when you click the Reset button. It is possible that the procedure will take some time. When you wish to delete all of your personal files, select Remove Everything from the drop-down menu. You have the option of removing everything from the drive where your operating system is installed, or you may remove everything from the entire drive. In contrast, if you do not wish to save any data, you can choose All Drives from the drop-down menu. It’s also possible to completely wipe the disk you’ve selected, or only remove your data. Select Reset from the drop-down menu.

Important Step after Factory Resetting your HP Laptop

The next step after you have restored your HP laptop to its factory settings is to check that you have the most recent drivers for your operating system installed. Driver updates can be carried out by hand or by utilizing a reliable program such as Auslogics Driver Updater, which automates the procedure. If you are not computer literate, we recommend that you choose the latter option. It’s true that manually upgrading your drivers may be a hard, dangerous, and time-consuming process. Allow us to walk you through the process to give you a better understanding.

  1. The next step after you have restored your HP laptop to its factory settings is to ensure that you have the most recent drivers for your operating system installed on your computer. Driver updates can be carried either by hand or by utilizing a reliable program such as Auslogics Driver Updater, which automates the procedure. This option is recommended for those who are not computer literate. It’s true that manually upgrading your drivers may be time-consuming, dangerous, and difficult. Allow us to demonstrate the procedure in order to give you an idea.

RECOMMENDED

Resolve PC Issues with Driver Updater

Drivers that are out of current or corrupt are frequently the source of poor PC performance. Auslogics Driver Updater identifies driver problems and allows you to update outdated drivers all at once or one at a time to improve the performance of your computer. DOWNLOAD NOW

You might see this message:

“The most up-to-date driver software for your device has already been downloaded and installed.” If you see that message, you must complete an extra procedure to guarantee that all of the necessary drivers are loaded on your computer. You must go to the manufacturer’s website and manually search for the most recent driver versions available. Downloading the correct software packages for your system is important to its success. If you download the incorrect drivers for your computer, you may end up doing more harm than good to your machine.

  1. So, why would you take the chance of installing the erroneous drivers when you can choose for the simple and safe method instead?
  2. You won’t even have to bother with updating your drivers one by one.
  3. After doing a factory reset on your HP laptop, you will notice a considerable increase in the speed and performance of your computer.
  4. Auslogics, a Microsoft Silver Application Developer certified company, exclusively produces high-quality software that can match the high standards of any Windows user.
  5. As a result, you can be confident that Driver Updater has been tested and confirmed to be safe and effective.

Please tell us about your experience in the comments section below! Do you enjoy what you’ve read so far? Please give it a rating and share it with your friends, and sign up for our newsletter! Loading. 37 votes, with an average rating of 4.51 out of 5.

How to Reset Password on HP Laptop Without Disk. 5 Quick Solutions – PC Webopaedia

Is it necessary for you to reset the password on your HP laptop, but you can’t seem to locate your restoration disk? Fortunately, there are a variety of options available to you for regaining access to your account without having to format your computer or use a disk. Any of the following techniques will allow you to reset the password on your HP laptop running Windows 7/8/10 in a matter of minutes:

  • Is it necessary for you to reset the password on your HP laptop, but you can’t seem to locate your recovery disk? It is possible to regain access to your account without having to format your computer or use a disk recovery program, which is a blessing. Using one of the following techniques, you may easily reset the password on your HP laptop running Windows 7/8/10 in a matter of minutes:
You might be interested:  How To Do A Screenshot On Windows 10

Is it necessary to change the password on your HP laptop, but you can’t seem to locate your restoration disk? Fortunately, there are a variety of methods available to you for regaining access to your account without having to format your computer or use a disk. You can reset the password on your HP laptop running Windows 7/8/10 in a matter of minutes by using one of the ways listed below:

Method 1: Reset HP Laptop Microsoft Password Online

It’s possible that you’ll come to appreciate the fact that you linked your HP laptop to your Microsoft account. No items were found. Easily create a new password for your account. through the process of resetting the password on your Microsoft Account Here’s how it’s done:

  1. Any device may be used to access the Microsoft Password Recovery website. Enter your account information (email address, phone number, Skype name), then click Next. Identify yourself by answering the security questions or providing a code if necessary. Upon regaining access to your account, enter a new password and click Next to proceed. I believe your account has been restored

Keep in mind that this strategy will only work on laptops that are running Windows 10 version 1803. Using this approach, you may also unlock your Dell Inspiron laptop if you have one.

Method 2: Reset HP Laptop Password with a Different Admin Account

In addition to allowing you to manage and recover the password of another account on your HP laptop, the administrator account also has the greatest authority over your computer. This implies that if you lose access to one of your laptop’s accounts, you may connect into another account that has administrator privileges to restore access. If you have an administrator account, you may proceed with the Hewlett Packard password reset of a user account in the following ways.

  1. The log-in page will direct you to a user account that has administrator privileges. The Shiftkey must be pressed five times in succession to immediately activate the built-in administrator account if you do not have access to any other accounts. Access the Control Panel and select User Accounts from the drop-down menu. SelectManage another account and then choose the user account that has been locked on your laptop. Change the password for the locked user account by clickingChange the password and entering a new password for the restricted user account. To confirm the change of password, clickChange Password. Please log out of your existing account. By entering a brand-new password, you should now be able to log into the restricted account.

Method 3: Reset HP Laptop Password with HP Recovery Manager

However, before we teach you how to use HP Recovery Manager to reset your PC password, you should be aware that you will be wiping all of the data on your computer during this procedure.

  1. Shut down your HP laptop and disconnect all of its devices, with the exception of the mouse, keyboard, and display. If an option menu does not show immediately after starting your laptop, restart it and hit the F11key again. SelectTroubleshootand then clickRecovery Manager to begin the process. Select System Recovery from the drop-down menu. If you do not wish to restore your files, select Recover without backing up your files from the File Recovery menu. If this is the case, click Back up your files. Choose the method you wish to use to back up your files, and then insert a hard drive if necessary. SelectNext,thenNextagain
  2. In addition to erasing your restricted user account, this will also erase all of the data stored on your laptop.

Alternatively, you may go to the Start Menu and look for the HP Recovery Manager by typing the following:

  1. When prompted by user account control, choose HP Recovery Manager and yes when requested by user account control. To proceed, choose Windows Recovery Environment and click OK to proceed. Following this, your laptop will restart, and you may go to Step 3 of the prior instruction tutorial.

To avoid losing data on your laptop, however, you should experiment with the many solutions on our list of suggestions.

Method 4: Reset HP Laptop Password with Forgotten Password Wizard

If you have misplaced your password reset CD, you may generate a new one using the Forgotten Password Wizard. Click here for more information. What you need to do is as follows:

  1. Log in to your laptop with any local account that you have
  2. Connect a blank CD or flash drive to your laptop for storage purposes. Select Control Panel from the Start menu when you first boot up Windows. In category view, selectUser Accountsfirst, then User Accounts again to return to the previous screen. User Accounts may be found in the icons view. If you look in the menu bar, you should see the Make changes to your user account option. Click on the button “Create a password reset disk,” and the Forgotten Password Wizard should appear. Select the drive to which you wish to install the program by clicking Next. ClickNextagain
  3. After you’ve entered the password for your current user account, click Next. When the wizard is finished, press the Next button. ClickFinish to complete the process and remove the flash disk.

In the event that you forget your HP laptop password, this is an excellent backup alternative.

Method 5: Reset HP Laptop Password by Factory Reset

If all else fails, you may always restore your HP laptop to its original factory configuration. This, however, will completely wipe up all of the data on your laptop. If you have recently made a backup of your laptop, you will not suffer too much loss. However, if you haven’t backed up your laptop in a while, it’s a good idea to back up any important information first, especially if you have access to any other user accounts.

  1. To reach the settings menu, restart your computer and hold down the F11 key until you see the options menu. On the Choose an option screen, select Troubleshoot from the drop-down menu. Select Reset this computer from the drop-down menu. Choose Keep my data or documents safe. Depending on your preference, you can remove everything. You will be prompted with a warning, after which you should click Next to proceed with the recovery procedure. This will delete all of the existing user accounts and passwords from your computer. In the event that you choose to make a backup of your data, you will locate the files on your local hard drive. When prompted, “Are you ready to reset this PC?” select Reset from the drop-down menu. Highlight Continue, then press the enter key

Conclusion

There are various options for recovering your HP administrator password if you don’t have a disk. Changing your Microsoft account password online is simple, and managing user accounts may be done with another admin account.

In the event that you don’t mind losing all of the information on your laptop, you may reset your password using HP Recovery Manager, Factory Reset, or Forgotten Password Wizard.

2 options to factory reset a HP laptop – Windows 10

There are various techniques for recovering an HP administrator password without a disk. User accounts can be managed online using another admin account if you have a Microsoft account that you want to update. Set your password with HP Recovery Manager, Factory Reset, or the Forgotten Password Wizard if you don’t mind deleting all of the data on your laptop.

Option 1: Still can login to HP laptop normally

If you are still unable to get into your HP laptop, you may do a factory reset from the Windows 10 Settings menu. Step 1: Log in to your HP laptop computer. Step 2: In the search field, type in “reset this pc” and then click on the result that appears on the screen. Step 3: Select the Recovery option from the drop-down menu, and then click on the “Get Started” button under Reset This PC. Step 4: Choose between the options “Keep my files” and “Remove everything.” ChooseRemove everythingif you want to transfer ownership of your HP notebook, since this will completely erase all of your personal files, applications, and settings.

If you choose to delete everything, you will be prompted to choose which drive you want to delete.

Step 6: You have two alternatives to pick from:

  • If you simply wish to remove your files, pick “Just remove my files” from the drop-down menu. Choosing “Remove files and clean the disk” will also clean the drive if you desire to do so.

Step 7: In this step, you may view what will be erased from your computer after it has been reset. If you are certain that you want to reset your HP laptop, click on “Reset.” Your laptop will restart and the resetting process will begin immediately. The final step is to wait for the resetting process to be completed, which will take some time.

Option 2: Cannot log into HP laptop normally

The following steps are necessary if you have forgotten the HP laptop login password or the laptop has malfunctioned with a blue or black screen and you are unable to log into Windows regularly. You will need to fix these problems out of system without logging in normally. It is possible to utilize the CD disc that came with your HP laptop to reinstall or repair the operating system, as well as to perform a factory reset on your laptop. If you need to restore your HP laptop, you may learn how to restore an HP laptop without logging in with a password by visiting this page.

If you wish to use the CD disc to restore your HP laptop to its factory settings, go to the procedures below and follow them.

Factory reset HP laptop with CD disc

Step 1: Insert the CD disk into your HP laptop’s optical drive and configure your HP laptop to boot from the CD. Second, when the installation page appears, select Next and then “Repair your computer.” Step 3: Select “Troubleshoot” from the menu bar. Step 4: Select “Reset this PC” from the drop-down menu. Step 5: You have two alternatives from which to choose:

  • If you wish to keep your personal files, choose “Keep my files” as your option. If you wish to delete all of your personal files, choose “Remove everything.”

Step 6: Choose the operating systemWindows 10. After selecting the “Keep my files” option, click on the “Reset” button, and the resetting procedure will begin.

Step 7: Choosing Remove everything will prompt you to choose which disk to delete all of your files from. You have the option of selecting between “Only the disk where Windows is installed” or “All drives.” Step 8: Following the selection of the drives, there are two further options to consider:

  • Choosing the operating systemWindows 10 is the sixth step. To reset your computer if you want to keep your files, click on the “Reset” button, and the resetting procedure will begin. Remove everything will need that you choose which drive to delete after you have selected this option. Only the drive where Windows is installed may be selected, or all disks can be selected. In addition to the drives, there are two other alternatives to consider:

9. Wait for the resetting procedure to be completed; it will restart multiple times throughout this process.

Reset HP laptop to factory default settings with HP Recovery Manager

If you are unable to boot or log into your HP laptop regularly, you may also use the HP Recovery Manager to restore your laptop to its factory settings. Step 1: Turn off your HP laptop computer. To begin, unplug all of the external devices and cables that are not connected to the computer, including the monitor, keyboard, mouse, and power cord. This includes personal media drives, USB drives, printers, and fax machines. The next step is to turn on your HP laptop and continually hit the “F11” key until the Choose an optionscreen shows.

Afterwards, select “Recovery Manager” from the drop-down menu to launch HP Recovery Manager.

Step 7: If necessary, you may back up your files by following the on-screen directions.

Related Articles

  • Instructions on how to restore a Dell computer to its factory settings without signing in When you forget your Asus tablet’s password, you may do a factory reset. How to recover a lost password on an HP laptop or desktop computer that does not have a drive
  • Remove all data from the Surface Pro 3 and restore it to factory default without logging in with a password
  • How to get into your Windows 10 laptop if you’ve forgotten your password

Reset HP Laptop: How To Hard Reset/Factory Reset Your HP

When you’re having difficulties that you can’t seem to solve, restarting your computer is a good idea. It has shown to be quite beneficial in the repair of computers (solving system issues). There are three methods to assist consumers reset their HP laptops, as described in this post supplied by MiniTool Solution. To prevent making errors, you should carefully follow the procedures and processes outlined above.

Reset HP Laptop in 3 Different Ways

Resetting your computer involves deleting all of the information and configuration stored on it. When your computer isn’t functioning properly, this is quite useful in troubleshooting the problem. If you want to reset your HP laptop in order to resolve a variety of system difficulties but don’t know how to do so, you should read the information in the following section. Make sure you have a data recovery tool on available if you are concerned about the vital information stored on your HP laptop.

Factory Reset HP Laptop

Returning any electronic equipment to its factory default settings is a convenient means of restoring it to its original condition (factory settings). How to perform a factory reset on an HP laptop? It is dependent on the situation.

  • Assuming you are able to connect into your HP account regularly, please utilize the Settings menu to factory reset your HP laptop. It is necessary to finish the reset using the Windows Recovery Environment if you are unable to access your HP notebook.

You should be aware that if you discover that the short DST failed, it signifies that the hard drive is unable to pass the Disk Self Test owing to abnormalities discovered on the disk.

Reset HP Laptop via Windows Settings

Use the following steps to reset your HP laptop:

  1. To access the Settings app, press Windows + It at the same time. Scroll down to the bottom of the page and click on UpdateSecurity. Select the Recovery option from the left-hand sidebar. The Reset this PCsection may be found under Recovery in the right-hand pane. Under Reset this PC, click on the Get startedbutton to get started. Choose an optionwindow will be seen after Windows has been restarted. You have the option of selecting I want to keep my files, so I’ll select Next, then Reset. Additionally, you may choose Remove everything-make a selection from Only the drive where Windows is installed, or all drives—you have a choice between the two. Simply delete my data and remove files, and then reset your computer’s hard drive. Allow for the completion of the process
You might be interested:  How To Get Out Of Safe Mode Windows 10

Is it possible to retrieve files from a computer that has been factory reset?

Perform a System Reset through Windows Recovery Environment

Using the Windows Recovery Environment, you may reset your HP laptop as follows:

  1. Remove any and all external devices from the HP laptop, including USB drives and printers
  2. And Turn on your computer and instantly and frequently click the F11 key
  3. Remove your finger off the keyboard until you see the Choose an option box
  4. Make a selection ofTroubleshootand then clickReset this PC
  5. You may choose betweenCloud download and Local reinstallation. (Optional)
  6. Choose from the options “Keep my files” and “Remove everything.” Then, to restore your HP laptop to its factory settings, follow the on-screen instructions.

What Is the HP Boot Menu, and How Do I Get Into the Boot Menu Or BIOS?

Hard Reset HP Laptop

What exactly is a hard reset? A hard reset, sometimes known as a power reset, is the process of completely erasing all information from a computer’s internal memory storage. The power reset/hard reset should be used if you are experiencing any of the following issues: Windows not responding, a blank display, software freezing, keyboard not responding, or other external devices locking up.

Is it true that a hard reset on an HP laptop deletes everything? No, it does not; it merely deletes the memory data, which means that your personal information will remain unaffected. How can I do a hard reset on my HP laptop? The following are the steps to reset a laptop with a replaceable battery:

  1. To prevent this from happening, disconnect or remove any peripheral devices (including a USB drive, an external display, a printer, and even the power supply)
  2. Removing the battery from your HP laptop is recommended. You should turn it away from the battery compartment lid
  3. To remove the lid, use a screwdriver to remove the screws holding it on. Remove the battery from the device with care. In order to drain remaining electrical charge, press and hold the Power button for at least 15 seconds. Replace the cover and fasten the screws once you have successfully installed the battery. To restart your HP laptop, press the Power button. If you get a starting menu, choose Start Windows Normally and press Enter. Following a successful startup, reconnect each peripheral device to the HP laptop one at a time.

The procedure for resetting a laptop with a non-removable/sealed battery is much the same as with a detachable battery. Take it for granted that you will not have to remove the cover, take out the battery, re-insert the battery, and then replace the cover. Meanwhile, the processes for laptop repair and recovery are relatively similar. Resetting most computers may be accomplished by pushing and holding the Power button for a few seconds. If this doesn’t work, you should look up your model number online to see what other buttons you should try pressing.

Scroll down to see more.

How to Reset HP Laptop to Factory Settings

Your HP laptop has most likely been a dependable and dependable friend. It’s probable that you’ve customized your desktop to your liking and downloaded and installed every program you could possibly require. When it comes to restoring your laptop to its original factory settings, however, there may be occasions when this is vital to do so.

Reasons to Reset a Laptop

Your HP laptop has most likely been a dependable and dependable friend. Your desktop has probably been customized just to your liking, and you’ve probably installed every program you could possibly want. When it comes to restoring your laptop to its original factory settings, however, there may be occasions when this is important to do.

Factory Reset HP Laptop In Windows

Assuming there isn’t a problem with your computer that prevents you from signing into Windows, this is a straightforward (though not immediate) remedy.

Bring up the Option to Reset This PC

Assuming there isn’t a problem with your computer that prevents you from signing into Windows, this is a straightforward (though not speedy) fix.

Select Get Started

This option may be found under the Recovery menu.

Choose To Keep Your Files or Remove Everything

You will be required to make an essential decision in this situation: In the event that you want to continue to use this laptop, it may be prudent to save such files. If, on the other hand, the machine is about to be returned to you, you will almost certainly wipe everything. If this is the case, make sure you have a backup of anything you wish to save (important documents and pictures, for example). Whichever option you choose, make sure to follow the instructions and provide Windows with all of the information it requires to complete the process (what to delete, from where, and so on).

Alternative to Logging into Windows

There are a variety of methods for resetting your computer. It is always possible to boot into a recovery environment in the event that you are unable to log into Windows.

Press F11 While Booting Your Laptop

You may reset your computer in a number of different ways. The recovery environment can be used when you are unable to log into Windows for whatever reason.

Select Troubleshoot from the Options Screen

Follow the instructions to identify the specifics of what you’re eliminating and from where you’re removing it once again. After you’ve gone through all of the options, simply confirm the reset and Windows will take care of the rest.

Reset HP Laptop to Factory Settings in BIOS

Aside from restarting Windows, it’s conceivable that you’ve made changes to the HP laptop’s BIOS in the past that have caused the problem.

If you believe that they are contributing to an issue in Windows – or if you just wish to start again from the beginning – click here. In either case, you have the option of restoring the device to its factory settings.

Hit the F10 Key During Boot Up

It’s possible that you’ll have to press this key many times when the screen is black.

Hit the F9 Key from BIOS

Wait for the confirmation window to appear, and then choose “Yes.”

Hit the F10 Key to Save Settings

This will ask you to save your work and leave the program. The machine will reboot as a result of this action.

Consider Updating Drivers for Improved Performance

It’s possible that you’ve opted to execute a factory reset due to the performance of your laptop. if you notice that your mobile machine is no longer running as smoothly as it used to, there are a number of different options to consider. Windows was created to be able to run on a wide range of computer systems and communicate with a wide range of devices. Every computer is equipped with gadgets, ranging from your keyboard to a range of Bluetooth accessories (and so on). This hardware requires code in order for the software running on your computer to communicate with it.

These device drivers will need to be updated as time progresses.

Except for the option of relying on Microsoft Windows to attempt to locate the suitable driver, you will want to either do it yourself or use expert software to do the work.

Manually Update Your Drivers

In the event that you already know which drivers need to be updated, you’ll only need to look them up on the manufacturer’s website. You’ll need to know the device’s model and/or serial number in order to proceed. Once you’ve found the correct device, you may navigate to the Device Manager in Windows and locate it. Update the driver by selecting it from the context menu of the device. Select Browse my machine for driver help from the drop-down menu.

Automate the Task of Keeping Drivers Current

There is always a less difficult option. Driver support software, for example, may simplify the process of discovering and installing drivers on your computer. The elimination of uncertainty – as well as the time commitment required for upgrading various devices – can make it much easier to keep your laptop up to date and running smoothly. Try This Time-Saving Shortcut to Save Time Start utilizing Driver Support | ONE right now and you’ll save both time and stress when dealing with typical Windows device problems.

When you have completed the registration process, the service will immediately update your drivers.

Automatic Driver Updates

Driver Support has been relied upon since 1996 to reduce the pains associated with maintaining such drivers up to date. When Driver Support is launched, it will inventory your computer for all of the current device kinds that are supported. When you have completed the registration process, the service will automatically update any drivers that are out of current or missing.

You may save yourself the time and effort of having to manually locate each driver. Driver Support may be downloaded right now for more assistance. If it turns out that drivers were the source of the problem all along, you can reset your approach rather than the laptop.

Was this article helpful?

  • Method for Windows 10: StartSettingsUpdateSecurityRecovery Begin by clicking on the Reset this PC button. Windows Recovery Environment (Windows RE): Hold F11 while restarting Troubleshoot, or hold ShiftStartPowerRestart when resuming Troubleshoot. Problem-solving techniques include the following: For Windows 7 or 8, use HP Recovery Manager

You can utilize the conventional procedures for resetting an HP-made laptop that is running Windows 10 to restore it. However, if you’re using a previous version, you may erase your computer and reinstall the operating system using a separate application from HP.

How to Factory Reset an HP Laptop Running Windows 10

The fundamental procedure for resetting an HP laptop with Windows 10 installed is the same as it is for resetting any other device using Microsoft’s operating system. Here’s the quickest and most straightforward method.

  1. Connect your PC to the network. If it’s powered by the battery, you won’t be able to reset it. To begin, press the Start button
  2. Then selectSettings
  3. Then choose UpdateSecurity. ChooseRecovery from the left-hand column, and then click Get Started under Reset this PC. There are two options available in the following window:
  • Please keep my files. The “reinstall in place” option allows you to keep the files that you’ve stored on your computer while doing the installation. Take everything out of the picture. This command completely wipes off your hard disk, including all of your images, documents, and anything else you’ve stored to it.

Remove everything from the list if you want a complete factory reset. In any case, any apps you’ve installed will be uninstalled, and any settings you’ve altered will be reset to their defaults. Following that, you will be able to modify the parameters that determine how thorough the reset will be. Only your files are removed, which is the default setting. If you aren’t planning on retaining the computer, selectChange settingsand switch onData erasurein the next box that appears. Then, to preserve your changes, clickConfirm.

Select if you want to restore Windows to a previous version of the operating system, and then clickReset.

It will only take a few minutes to complete this procedure.

How to Factory Reset an HP Laptop Using Windows 10’s Recovery Environment

Sometimes it’s preferable to utilize the Recovery Environment in Windows 10 to reset your computer, especially if your laptop isn’t booting up properly. You can gain entrance to this place by utilizing one of the two methods listed below:

  • If the Choose an Optionscreen does not show immediately after restarting the computer, hold down the Shift key on your keyboard until the Startbutton appears, or hold down the F11 key on your keyboard until the Startbutton appears. Choose Restart from the Power menu
  • Hold Shift until the Choose an Optionscreen appears
  • Then press Power again to restart.

Once you have reached this stage, proceed as follows:

  1. Choose Troubleshoot
  2. Then click Reset this PC. Select the method you wish to use to reinstall Windows, and then click Next to proceed.
  • Using the cloud, you may download the most up-to-date version of Windows from the internet. Windows is replaced by the installer from your hard disk when you utilize a local install.

Unless your machine is infected with a virus, HP advises a local installation. On the following page, you’ll need to pick what you’re going to do with the information presently stored on your computer.

  • Please keep my files. However, it does not destroy any of the programs you’ve installed and does not reset any of the settings in Windows 10, but it does preserve all of your papers, photographs, and other personal objects. Removing everything eliminates all of your programs, resets all of your settings to their defaults, and deletes all of your data.

If you’re not planning on retaining the computer, selectRemove everything. If you select “Keep my files,” your computer will destroy all of your files and reinstall Windows on them. However, if you choose to remove everything, you’ll be faced with a number of other options. To begin, select the disks you want to erase. Only the drive where Windows is installed and all drives are available as options. The second method is more comprehensive and secure, but it will take longer to complete the procedure.

If you are not planning to keep the computer, you can choose the second option, but the procedure will take at least an hour to finish.

How to Restore an HP Laptop Using HP Recovery Manager

If your laptop was manufactured in 2018 or earlier, it is likely to be equipped with an HP utility known as Recovery Manager, which you may use to restore the operating system.

  1. Open HP Recovery Manager by searching for it in the Startmenu and clicking on it. Recovery Manager provides you with a couple of alternatives, both of which can be found under theHelpmenu.
  • It is possible to “restore in situ” Windows using the Windows System Reset option
  • However, this will not effect your files. The Windows Recovery Environment enables you to fully erase the memory of your laptop and reinstall a new copy of Windows on it.

Make your selection and then follow the on-screen prompts to finish the procedure.

Recovery Manager offers nothing more than give a centralized area to retrieve these configurations. Those who have read the previous portions of this essay may recognize the instructions as being identical to those provided here.

Thank you for informing us about this!

Leave a Comment

Your email address will not be published. Required fields are marked *