- 1 How to turn off automatic updates in Windows 10
- 2 How to turn off automatic updates: Pause updates
- 3 How to turn off automatic updates: Disable updates for good
- 4 How to turn off automatic updates: Use Windows Update Blocker
- 5 More Windows tips
- 6 How to Disable Windows 10 Update in Every Way (Windows 11 Supported)
- 7 All solutions to disable Windows 10/11 update:
- 8 How to Disable Windows 10/11 Update
- 9 How to Disable the Windows 10 Update from Downloading Permanently
- 10 How to Disable Windows 10 Updates
- 11 Using Group Policy to Stop Windows 10 Updates
- 12 How to Uninstall a Windows 10 Update
- 13 Frequently Asked Questions
- 14 Windows 10 Updates and Disabling Them
- 15 4 Ways to Turn Off Windows 10 Updates
- 16 Decide How You Want to Turn Off Windows 10 Updates
- 17 Other Ways to Turn Off Windows 10 Updates
- 18 8 Incredible Tricks Help Disable Windows 10 Update 
- 19 Solution 1. Disable Windows Update Service
- 20 Solution 2. Notify for Download/Install
- 21 Solution 3. Never Notify or Check for Updates
- 22 Solution 4. Meter Your Network Connection
- 23 Solution 5. Turn OFF Automatic Device Driver Installation
- 24 Solution 6. Pause Windows Updates for 35 Days
- 25 Solution 7. Change Restart Option
- 26 Solution 8. Go Back to Previous Version Using Backup Image
- 27 Bottom Line
- 28 How to Block Specific Driver or Patch Updates in Windows 10
- 29 How to Stop Windows 10 Update Completely [2019 Guide]
- 30 How Can I Disable Windows 10 Update?
- 31 Why I can’t stop Windows 10 auto update?
- 31.1 Way 1: Meter your network connection to stop Windows 10 update
- 31.2 Way 2: Disable Windows Update service to stop Windows 10 update
- 31.3 Way 3: Change Group Policy Settings to stop Windows 10 update
- 31.4 Way 4: Change Device Installation Settings to stop Windows 10 update
- 31.5 Bonus Tip
How to turn off automatic updates in Windows 10
The following are some of the reasons why you might wish to know how to turn off automatic updates in Windows 10. You must agree that these updates are necessary for keeping your system secure and stable, as well as for introducing the most up-to-date Windows features and enhancements. While this is true, the fact is that automated updates might be more of a bother than a benefit. They have the ability to stop your work and ask you to restart your computer so that they may be installed. It is also possible that updates contain flaws that cause problems on your computer rather than addressing them.
However, when automatic updates are enabled, you do not have much control over whether or not to apply such fixes.
- Learn how to switch off Windows Defender in this tutorial. How to make the Windows key in Windows 10 non-functional
- Learn how to uninstall the Windows 10 news and weather widget by following the steps below.
If you’re not in a hurry, you can turn off automatic updates in Windows 10 by halting them temporarily for up to 35 days or — if you’re feeling more daring — by removing them completely so that you may install them manually when you’re ready. You can learn more about both choices in our tutorial below, and how you can utilize a free software to switch off automatic updates with the press of a button is also covered.
How to turn off automatic updates: Pause updates
Because permanently blocking automatic updates in Windows 10 may result in security and stability issues, you may wish to “pause” them so that they may be installed at a later time that is more convenient for you. Here’s how you go about it. Make sure you’re logged in as a user with administrator access for the duration of all of these processes. Start the Settings app in Windows 10 by selecting the gear symbol from the Start menu after clicking on the Start button. When the Settings box appears, select Updatesecurity from the drop-down menu.
- To disable automatic updates for one week, select the Pause updates for 7 days option from the Updates menu.
- To manually switch them back on before then, select Resume updates from the drop-down menu.
- Scroll down to the section titled Pause updates and choose a date from the Pause till drop-down menu that appears.
- Once you reach that date, you’ll need to apply the most recent Windows updates before you may halt and resume the updates.
How to turn off automatic updates: Disable updates for good
If you’re prepared to take the chance of keeping your computer in a potentially risky state for an extended length of time, you may disable automatic updates in Windows 10 forever, or at the very least until you’re ready to manually install them. Here’s how to go about it. 1.Press the Windows key and R at the same time to bring up the Run box. Type “services.msc” into the search box and press OK or Enter. (Photo courtesy of Microsoft) 2.When the Services box appears, scroll down to the Windows Update entry at the bottom of the list.
(Photo courtesy of Microsoft) 3.
To turn off automatic Windows updates, select OK or Apply from the drop-down menu.
You will be able to manually check for and install updates as a result of this. Select SettingsUpdatesecurityWindows Update and then click on the Check for updates button. (Photo courtesy of Microsoft)
How to turn off automatic updates: Use Windows Update Blocker
Installing a free tool called Windows Update Blocker will save you the time and effort of having to fiddle with Windows settings every time you want to switch automatic updates on or off. Here’s how to put it to use. Step 1: Download and install Windows Update Blocker. 2.Right-click the downloaded file and select “Scan with antivirus software” from the context menu. 3. Unzip the file and launch the software. It does not necessitate the installation of anything. 4.As soon as the software launches, just select Disable Updates and then click Apply Now.
(Photo courtesy of Tom’s Guide.) In order to re-enable automatic updates, simply choose Enable Updates and then click “Apply Now.” To see if Windows Update Blocker is doing its work, go to the Start menu and select Update Options.
You may check here to see if automatic Windows updates are enabled or deactivated, depending on your preferences.
More Windows tips
- How to remove a Windows update in the proper manner
- Learn how to utilize Windows 10 like a pro with these tips and tricks. A step-by-step instruction on how to install Windows 11
- What is the best way to share a printer in Windows 10? How to check the temperature of your computer’s CPU
- God Mode in Windows 10 and 11
- How to Enable God Mode
- How to completely delete Microsoft Edge and prevent it from reinstalling
- System Restore in Windows 10: What it is and how to utilize it It’s possible to keep your computer awake without touching it.
How to Disable Windows 10 Update in Every Way (Windows 11 Supported)
The Insider version of Windows 11 was launched in June 2022, and the general public version will be released in July 2022. (codenamed Sun Valley). Since October 2022, the official version of the software will be available on any compatible machine. Users’ machines must be equipped with TPM 2.0 and boot in UEFI mode in order to run the latest Windows 11. In the event that you would want to upgrade to Windows 11 but aren’t sure if your computer meets the minimal requirements, you may use this link to determine whether or not your machine is compatible with the update to Windows 11.
My operating system, on the other hand, is something I really don’t want to upgrade because the automated update may consume system and network resources.
Please accept my thanks in advance.”
All solutions to disable Windows 10/11 update:
|1. Manually Disable Windows Update||Press the Windows key + R to open the Run box.Full steps|
|2. Change the Settings of the Group Policy Editor||Go toComputer ConfigurationAdministrative Templates.Full steps|
|3. Meter Your Network Connection||Click “NetworkInternet” in the Settings app.Full steps|
|4. Change Update Settings using Registry||Type regedit, and click OK to open the Registry.Full steps|
When you receive a notification from Windows regarding an automatic update, such as:
- Updates are installed automatically
- It is possible to get updates, but you must decide when to install them. Check for updates, but let me to decide whether or not to download and install them myself.
What would you do in this situation? We have the following solutions available to us.Tip Before proceeding with the four options to completely halt Windows 10 updates, make sure that you are using the correct Windows 10 edition (Home, Professional, Education, or Enterprise) by heading to Settings – System -About so that you may choose the most appropriate solution for your situation. Furthermore, the fourth method of attempting to manage the Windows 10 update by utilizing the Registry is fairly hazardous; make sure to back up your data before proceeding, and the specifics will be provided in the further suggestions section.
How to Disable Windows 10/11 Update
This applies to the following operating systems: Windows 11, Windows 10, and Windows 8.
Depending on whatever system version you are using, the operation stages may alter somewhat.
Solution 1. Disable Windows Update Service
Recognize the limits of this approach. Despite the fact that deactivating the automatic update service would prevent any Windows 10 cumulative updates from being downloaded, the service will automatically re-enable itself once a specified period of time has passed. The following are the instructions: 1. To open the Run box, simultaneously press the Windows logo key and the letter R. 2.Input services.msc into the search box and hit Enter. 3. Scroll down to Windows Update and double-click it to activate it.
- Then click on “Apply” and “OK” to save the changes you have made.
- If this is the case, you may consider purchasing the EaseUS CleanGenius toolset to assist you.
- To turn off Windows Update, follow these steps: Install EaseUS CleanGenius on your computer by downloading it for free from the company’s website.
- Launch EaseUS CleanGenius and select “Optimization” from the drop-down menu.
- Alternatively, if Windows Update is presently active, you may click the button to turn it off.
- If you want to see if you’ve deactivated the service automatically, go to “Start,” enter “Services,” right-click “Services,” and select “Run as administrator.” Step 5.
- In the list of services, locate and right-click “Windows Update””Properties” and select “Open Properties”.
Solution 2. Change the Setting of the Group Policy Editor
There is no Group Policy function in the Home edition of Microsoft Office 2007. As a result, you can only use the Group Policy Editor to update the settings to prevent Windows 10 from automatically updating if you are running Windows 10 Professional, Enterprise, or Education. If there are any new updates, the group policy editor will tell you of them without automatically installing them.
- In the Home version, the Group Policy functionality is not accessible. Because of this, the Group Policy Editor can only be used to update the settings to prevent Windows 10 from automatically updating if you are using Windows 10 Professional, Enterprise, or Education. The group policy editor will alert you of any new updates, but it will not automatically install them on your computer or network.
Note: If you need to upgrade your Windows version later, you may repeat the steps above and then select Enabled to turn on this function, which will allow you to continue to download the updates as they become available.
Solution 3. Meter Your Network Connection
Please keep in mind that this strategy will not work with Ethernet connections. This approach can only be used to prevent automatic updates when connected to the internet through Wi-Fi. It is possible to disable Windows 10 automatic updates if your machine is connected to the internet through WiFi. 1. On your desktop, click the Start button in the lower left corner, then select the “Settings” application.
2. Select “NetworkInternet” from the drop-down menu. 3. In the left-hand pane, choose WiF, and then select the name of your Wi-Fi connection. 4. Select the option “Set as metered connection” from the drop-down menu.
Solution 4. Change the way of Windows 10/11 Updates Using Registry
Extra Tips: Editing the registry is hazardous, and if you don’t do it right, it might cause irrevocable harm to your system. Creating a complete backup of your computer is highly suggested prior to starting this process. To back up your data, all you have to do is follow these three simple steps with this backup software: For the first time you back up files with EaseUS Todo Backup, clickCreate backupon the home screen and then mouse click the huge question mark to pick the contents of the backup file.
- “OK” will be shown once you have completed Step 3 and have located all of the files, folders and directories you wish to back up.
- Choosing a backup place to save and maintain the backup is the fourth step in the process.
- We personally advocate that consumers utilize a cloud drive rather than a physical drive to store crucial backups due to the increased accessibility, flexibility, and security that cloud storage provides.
- Continuing with the “Options” setting, if you’re interested in creating an automated and intelligent backup schedule for the next file backup task, continue with this step.
- Here’s where you may customize a complex and automatic backup task: Step 7.Click on “Backup Now” to begin the process of backing up your files.
- With a backup in hand, it’s now safe to personalize a Windows 10 upgrade without receiving any forced updates on your PC, according to Microsoft.
- To open the Run command, press the Windows key plus the R key at the same time.
In the Run box, type regedit and press Enter to access the Registry.
Select “New” from the context menu of the Windows folder and then click “Key.” 4.
5) Select “new” from the context menu of the newly formed key and then click “Key.” 6.
Right-click on the right-hand side of the newly generated key, pick “New,” and then select “DWORD (32-bit) Value” from the drop-down menu.
Give the new key the name AUOptions and press the Enter key.
Its purpose is to “Alert for download and notify for installation.” Select “OK” from the drop-down menu.
Exit the Registry in order to complete the process.
You will be able to successfully prevent any automatic Windows 10 updates in this manner.
If you follow these steps, you should be able to attempt to block Windows 10/11 updates in every method. Each option has been proven to be effective as long as you intend to switch off all of the automatic updates in Microsoft Windows 10.
How to Disable the Windows 10 Update from Downloading Permanently
Software updates are one of the most inconvenient things that we have to deal with. Windows users frequently make light of the updates they receive because they take so long to download and install (yes, you should initiate your update overnight). Updates are essential for the health and security of our computers, just as they are for any decent program. However, there are occasions when it is just not practicable to do the action at hand, and there are other situations when it might cause difficulties for other program that you are operating.
The reason for this is that developers genuinely care about the product they create, and they don’t necessarily believe that end-users will be responsible for doing the upgrades themselves.
An automated update that is performed at an inconvenient time might be quite inconvenient.
How to Disable Windows 10 Updates
There are several methods for temporarily stopping Windows 10 updates. Although disabling Windows 10 updates is not permanent until you are unplugged from the internet, there are a few ways to do it. We’re not here to talk about Windows 10’s aggressive approach to updates; after all, it’s the most widely used operating system on the planet, making it the most frequently attacked by criminal hackers. Despite the fact that Windows 10 has a penchant for enabling updates to take place even after altering the settings, read on for the best current techniques for blocking them from taking place.
Disable Windows 10 Update Using Services.msc
Following these instructions will allow you to turn off Windows 10 updates: 1.
- You may access your PC’s service settings by using the Win + Rkeyboard shortcut and typing ” services.msc “. After that, scroll down and double-click on Windows Update to gain access to the General Settings
- In the Startup type drop-down menu, pick Disabled
- And then click OK. Once you’ve finished, click OK and then restart your computer.
When you perform this action, Windows automatic updates will be turned off permanently. If you’d want to re-enable it, simply repeat the process described above while switching the option to Automatic.
Disable Windows Updates Via the Settings Menu
Another, more familiar approach would be to make changes to the Windows Update settings through the real Windows Settings on your computer’s desktop. This method may be more convenient for certain people based on their level of technological sophistication, but it is not a long-term solution. If you want to turn off your updates through the settings, do the following:
- Navigate to your WindowsStartmenu and choose theSettingsscog icon. Now, within the Settings page, click on the UpdateSecurity button
- Next, select the Advanced settings tab
- And last, click on the Save button. After that, you may select a date from the dropdown menu for when you’d like automatic updates to be suspended. Please keep in mind that, as of this revision, Windows only permits you to postpone updates for around 6 weeks.
As previously noted, this is not a permanent solution, but it is useful to know if you just need to suspend your updates for a short period of time. It is unnecessary to worry about your PC becoming seriously out of date because the automated updates will soon switch back on by themselves if you temporarily pause your updates.
How to Stop Windows 10 from Downloading Via the Registry
The first instructions vary depending on the version of Windows you’re using, but the procedure is fundamentally the same regardless of which version you’re using.
To prevent automatic updates from occurring through the Registry, follow the procedures below:
- Open the Start menu, type ” regedit “, and then select Registry Editor from the drop-down menu. (TIP: Alternatively, you may just press the Windows key and the R key together to bring up the Run window, and then type ” regedit “
- As soon as you have the Registry Editor open, you can look for the key that indicates whether or not your machine is ready to receive Windows 10. Double-click on the following choices on the left-hand side of the screen: HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdateOSUpgrade
- Once you’ve found the correct key, you’ll need to enter a value to inform the system that you do not wish to download Windows 10. To do so, right-click on the key name and pick theNewsubmenu, followed by DWORD (32-bit) Value from the drop-down menu. The creation of a new value namedNew Value1, which you should rename to AllowOSUpgrade, will be visible. Finally, make sure that the OS Upgrade function is switched off in the Registry Editor before closing the window. Simply double-click the file and verify that the value is zero, making certain that the hexadecimal box is checked. Closeregedit must be used after the page has been refreshed to complete the procedure.
Many people have complained that this strategy does not have an instant effect or does not work. One (though weird) remedy for this is to reopen the Settings menu and select Check for Updates from the drop-down menu again. This should have the effect of forcing the modifications to take effect. Now you should be able to utilize Windows Update without having to worry about whether the Windows 10 Upgrade has slipped into the Optional upgrade list and marked itself as a candidate for download and installation.
Set a Metered Connection to Stop Windows 10 Updates
Using a metered internet connection is another method that may temporarily prevent your Windows 10 PC from upgrading. When you use a limited internet connection, automatic updates are not normally performed. The following are the steps to set up a metered connection:
- Open the Startmenu and select the Settingsicon from the drop-down menu. Now, select Network/Internet from the drop-down menu. On the left-hand side of the screen, selectWi-Fi, and then click OK.
Next, select Manage known networks from the drop-down menu. On the new screen that appears, choose the Wi-Fi network that you are currently connected to and then select Properties. 5. Toggle theSet as metered connectiontoOn switch from here. This may not be the best answer for you because other systems, such as OneDrive, may also fail to update or backup your information at the same time. However, it should prevent your PC from receiving automated updates.
Using Group Policy to Stop Windows 10 Updates
The information in this part will be useful to users who have a version of Windows 10 that is not the Home Edition.
- Create a new group policy by either selecting Edit group policy from the Startmenu or by pressing the Windows key + R and typing “gpedit.msc” in the search box. After that, select Computer ConfigurationAdministrative Templates from the drop-down menu. Components of the Windows operating system Updates for Windows
- Locate and double-click Configure Automatic Updates in the menu bar. Afterwards, selectDisabled and then clickApply and OK
How to Uninstall a Windows 10 Update
Perhaps you’ve arrived here because you’ve discovered that an Update has already been installed and you’re dissatisfied with the results. In contrast to other operating systems, Windows does provide you with the ability to remove an update whenever you choose. Access your PC’sSettings and then click on the UpdateSecurity button, following the identical instructions as above. Once you’ve arrived, proceed as follows:
- Optimization of the ClickDelivery Process , then select View Update History from the drop-down box on the right
2. Next, select Uninstall updates from the drop-down menu. You can select whether or not to remove the updates based on your requirements. Especially if you’re doing this because the most recent update is causing problems with other software on your computer, it’s a good idea to conduct some research first before going on a full-blown removal spree. Check your driver and other updates to check whether the problem is caused by something other than the Windows operating system.
Frequently Asked Questions
There is a lot of disagreement about whether or not it is possible to permanently block Windows 10 updates. Some people have said that Microsoft is so tenacious that there is no way to get around them. Following a restart of your computer, the updates are reactivated. However, while this may not be the case for all software versions, it did function for us in December of 2020 when we tested it on Windows Home version 10.0.19041. Please try another one of the techniques indicated above if the one you’re currently using doesn’t work for you.
Should I Disable Updates?
Operating system upgrades, as previously said, are critical to the overall health and security of your computer system.
Many upgrades, on the other hand, do more harm than help when they are initially issued. The ability to disable updates shouldn’t be a problem if you wish to wait and install updates at your convenience. While updates are important, they aren’t always necessary on the day they are made available.
Windows 10 Updates and Disabling Them
This post has presented you with the best alternatives, even if they are just temporary, to stop Windows 10 updates from occuring for any reason you may be experiencing. Even if the only long-term option is to regularly roll back to an earlier version of Windows 10 or to remain isolated from the internet, there is a workaround available. Do you have a more permanent technique for blocking Windows 10 updates that you could share with us? Please share your thoughts and experiences in the comments section below.
4 Ways to Turn Off Windows 10 Updates
If there’s anything more infuriating than having an automatic Windows update consume the entire CPU or memory of your system, it’s this. Here’s how you can turn it off. Your machine will remain bug-free and protected from the most recent security threats if you keep Windows 10 up to date. In some cases, the update process itself can cause your system to come to a complete stop, which is unfortunate. No matter if you’re in the middle of writing an email, working on a term paper, or paying your bills, there’s nothing more inconvenient than when an automatic Windows update consumes all of your system’s CPU or RAM.
Decide How You Want to Turn Off Windows 10 Updates
Turning off Windows 10 updates may be accomplished in a variety of ways. You have the option of turning them all off permanently, or you can choose to just turn them off when they are not critical. You may also manually suspend them for a short period of time or arrange when they will occur at specific times. Consider all of the options available to you for controlling Windows 10 updates and regaining control over your machine.
Temporarily Turn Off Windows 10 Updates in Settings
Do you need to temporarily suspend updates so that you may finish your task and then restart updates later? No problem. Windows 10 Settings may be used to turn off Windows 10 updates for a period of time. 1. Select Start, type “settings,” and then select theSettingsapp from the search results. 2. Select UpdateSecurity from the Windows Settings menu. Choose Windows Update from the left navigation section of the UpdateSecurity window once it has been opened. Then, scroll down to the Advanced Options section and click on it.
Select the Pause updatessection from the drop-down menu and use thePause till drop-down menu to specify how long you’d like to temporarily turn off Windows 10 updates.
It’s also possible to achieve the same thing by selecting Resume updates from the Windows Update page.
Permanently Disable the Windows Update Service
Alternatively, if you choose to switch off Windows Updates permanently, deactivating the Windows Update service itself is a quick and simple way to do this. 1. Select Start, type “run,” and then select theRunapp from the drop-down menu. 2. In the Run application, type “services.msc” and press Enter. The Windows Updateservice may be found near the bottom of the page; right-click it and selectProperties. Choose theGeneraltab and change the Startup type to Disabled in the Startup type field. To complete the process, pick theStopbutton, then selectApply and finally selectOK.
Finally, restart your computer to ensure that the changed configurations are properly implemented. Windows Updates will no longer be executed automatically in the future. Always remember that you’ll have to manually install updates by opening the Windows Updates window.
Turn off Windows 10 Updates with a Registry Edit
You may also disable Windows Updates on Windows 10 by editing the registry in the system registry. 1. Go to the Start menu, enter “regedit,” and then choose theRegistry Editorapp from the list that appears. 2. Navigate to HKEY LOCAL MACHINESOFTWAREPoliciesMicrosoftWindows in the Registry Editor. Select New from the context menu when you right-click on the Windowsfolder, followed by Key. 3. Type the name of the keyWindowsUpdateand hit the Enter key. 4. Select New and Keyagain from the context menu when you right-click this new key.
- To set the value, click on the OK button.
- Automatic updates in Windows 10 have now been turned off permanently.
- If you ever want to re-enable automatic updates, you may do so by deleting theWindowsUpdatekey from the same section of the registry.
Hide Windows Updates That Cause Problems
You may deactivate certain updates using a Microsoft program called Show or Hide Updates, which is available for download here. This is particularly important if you are aware that specific upgrades are causing issues with your PC. Once the update has been hidden, Windows will not attempt to install it again. MajorGeeks has a file called thewushowhide.diagcab that you may download. To use the utility, double-click the downloaded file after it has been saved to your computer. 1. After the tool has been launched, click Next to go to the next page of the wizard.
- In the event that this is your first time utilizing the tool, there will be no concealed changes to display.
- Selected all of the updates you wish to conceal and block from being installed on your system by selecting the checkboxes beside them.
- You may re-run the Show or Hide Updates utility if you ever wish to unhide these updates and let them to complete their installation.
- This will bring up a popup displaying a list of all of the Windows Updates that have been concealed thus far.
- To make them visible again, choose the checkboxes next to them and then click Next.
- If an expected update does not appear in the list of available updates, it is possible that your system has already installed it.
Another method of disabling Windows 10 updates is through the use of the Group Policy Editor. Just bear in mind that the Group Policy Editor will not work on the Windows 10 Home edition of the operating system. It is only accessible for Windows 10 Professional users.
Other Ways to Turn Off Windows 10 Updates
With Windows 10 Professional and Windows 10 Enterprise. Consider turning off Windows Update Delivery Optimization on Windows 10 as well if you haven’t already. A peer-to-peer capability in Windows 10 is used to distribute updates amongst computers connected to the same network. Disabling a service can help to minimize network traffic. If you’re going to disable specific updates or turn off Windows 10 updates completely, proceed with caution. Some updates are critical, and failing to install them might put your system’s security at risk.
8 Incredible Tricks Help Disable Windows 10 Update 
Updating Windows is important for keeping your computer safe, but the latest version might be unreliable and time-consuming. As a result, it is vital to understand how to halt the Windows 10 update. This post will walk you through eight great solutions with step-by-step instructions. Windows update is a free Microsoft service that distributes updates such as service packs and patches for the Windows operating system and other Microsoft applications to users worldwide. As an added bonus, it may be used to update drivers for commonly used hardware devices.
However, given the fact that the twice-yearly new version might be unreliable (for example, Windows 10 1803 Crashes Computers with Intel SSD) and that the time-consuming upgrade may prevent users from functioning on their computers, understanding how to stop Windows 10 updateis essential.
RECOMMENDED: Tips on how to fix Windows Update becoming stuck while it is checking for updates
Solution 1. Disable Windows Update Service
Step 1. Press the Windows key plus R to bring up the run box. Step 2: Input services are provided. mscand hit the OK button. Step 3.Scroll down to Windows Update and double-click on it to launch the program. Step 4.In the pop-up window, choose Disabled from the Startup typebox, which is located at the bottom of the window. Then hit Stop, Apply, and OK in that order.
Solution 2. Notify for Download/Install
Option A. Using the Registry, prevent automatic updates from occurring. Warning: Editing the registry is a dangerous procedure that, if done incorrectly, might result in irrevocable harm to your system. Please follow the steps outlined below to create a backup of your hard drive before continuing. MiniTool Partition Wizard Free, a free partition manager, is highly suggested in this situation. Its “Copy Disk” tool can aid you in creating a sector-by-sector clone of your hard drive. Simply defined, it aids in the cloning of all sectors, even if a sector is blank or logically incorrect in its construction.
- Furthermore, if you are copying the system disk, the target drive is bootable after the transfer is complete.
- Download it for free.
- Start this software after it has been installed in order to access the main interface.
- Choosing the disk you just prepared as the destination disk and confirming that you wish to do so are the next two steps.
- Regardless of whether you choose to “Fit partitions to full disk” or “Copy partitions without resizing,” you may adjust the size of each partition by sliding the slider in the lower half of the window.
- Step 5.Finally, the disk map section allows you to see a preview of the modifications that will be applied to the destination disk.
- It is now necessary to change the registry in order to turn off automatic updates in Windows 10.
- To open the Run command, press the Win + R keys at the same time.
- Step 2.Take the following path: HKEY LOCAL MACHINESOFTWAREPoliciesMicrosoftWindows.
- Enter a name for the new keyAU and then hit the Enter key.
Enter the name AUOptions into the text box. Double-click the newly formed key and modify itsValue data by selecting one of the choices listed below:
- “Notify for download, and then notify for installation. ” This is the ideal option if you want to prevent Windows 10 from automatically downloading updates, and you’ll receive an alert when new updates become available. Updates will not download and install until you are ready to do so manually
- Otherwise, they will. The following options are available: “Auto download and notify for installation.” “Auto download and schedule the installation.” “Allow local admin to pick settings.”
Then, to switch off Windows 10 updates, click OK and dismiss the Registry Editor window. Changing the Group Policy Editor’s settings is an alternative to Option A. In addition to altering the registry, you also have the option of changing the settings of the Group Policy Editor, which is described below. How can you halt the Windows 10 upgrade in this manner? Take the actions outlined below: Step 1. Press Win + R at the same time to bring up the Run box. Enter gpedit.msc and press Enter to open the Local Group Policy Editor in Windows Vista or Windows 7.
Enable and Notify for download and auto install from the pop-up window to arrange automatic updates.
Alternative Solution 3 should be used if you wish to totally halt the Windows 10 upgrading process.
Solution 3. Never Notify or Check for Updates
In addition, by following the instructions outlined below, you may turn off Windows 10 updates entirely. Important: Please keep in mind that this feature will only be available in the Windows 10 Pro and Enterprise versions. Step 1. Download the “Never Notify or Check for Updates.reg” file by clicking here. Step 2. Then double click or touch on the.reg file that you just downloaded to register it in the system registry. Step 3: Navigate to SettingsUpdateSecurity, then choose theCheck for updates option in Windows Update from the drop-down menu.
You can now remove the.reg file that was downloaded.
Solution 4. Meter Your Network Connection
In addition, by following the instructions outlined below, you may turn off Windows 10 updates completely. Please keep in mind that this feature will only be available in the Windows 10 Pro and Enterprise editions of the operating system. First, download and save the “Never Notify or Check for Updates.reg” file, which may be found by going to this link. Add the downloaded.reg file to your computer’s registry by double clicking/taping on it. Step 3: Navigate to SettingsUpdateSecurity, then choose theCheck for updates option in Windows Update from the drop-down list.
After that, you may remove the.reg file that you downloaded.
Solution 5. Turn OFF Automatic Device Driver Installation
If you want to modify whether Windows will automatically download drivers and realistic icons for your devices from Windows Update, you may do so under Device Installation Settings. This feature will be available in all Windows 10 versions. Step 1.Right-click This PC and selectProperties, then Advanced system options from the drop-down menu. Step 2: Navigate toHardwareand selectDevice installation settings from the drop-down menu. In Step 3, select No (since your device may not function as planned) and then click Save Changes.
Disabling automatic updates in Windows 10 may be accomplished in one of five ways, all of which are quite safe. Alternatively, if you only want to delay the update, Solution 6-7 will show you how to temporarily turn off automatic updates. Simply continue reading.
Solution 6. Pause Windows Updates for 35 Days
By altering the Windows update settings, you may prevent Windows 10 from automatically updating for a period of 35 days. And doing this task is a piece of cake. Step 1. From the Windows Start menu, choose SettingsUpdateSecurity from the Security group. To access the advanced options, scroll down the right panel of the newly appearing window until you reach theAdvanced options below. Step 3.This option allows you to block Windows 10 updates for a period of up to 35 days maximum. But please keep in mind that if this option is not renewed before its expiration date, your computer will require an upgrade before it may be suspended for another period of time.
Solution 7. Change Restart Option
It is possible to schedule a time for Windows 10 to install the newest update within seven days after setting the time. When you have a lot of things to accomplish and need to concentrate on one subject for a length of time, this is really handy. Step 1. From the Windows Start menu, choose SettingsUpdateSecurity from the Security group. Step 2.Scroll down the right panel of the newly appearing window until you reach the Restart choices, which are shown below. Step 3.Toggle the button ofSchedule a timetoON, and then select a time and day to allow Windows 10 to complete the installation of the most recent update for the system.
Try one of these methods to turn off the Windows 10 upgrade.
To send a tweet, simply click here.
Solution 8. Go Back to Previous Version Using Backup Image
If you’ve come this far and found yourself here, it appears that none of the techniques listed above will be of use in disabling the Windows 10 upgrade. As a result, we highly encourage you to create a system backup prior to installing the update. You will be able to return Windows 10 to its prior version even if the new update has been installed by following these instructions. Because of its amazing performance, MiniTool ShadowMaker comes highly recommended in this situation. MiniTool ShadowMaker is a professional Windows backup program that is designed to protect your data, system, drives, and partitions against loss or corruption.
- Right now, you can get a free 30-day trial of the software.
- Following the installation, you must complete the following tasks: The first step is to set up automated system backups.
- Launch MiniTool ShadowMaker and select the option to “Keep Trial.” Choose Localcomputer from the drop-down menu that appears when you see the following screen.
- It is possible to observe that the currently running operating system has been selected as the backup source by default, and that a destination folder has been selected for archiving the system backup image in.
- When it comes to data security, it is preferable to make partitions on an external hard drive.
- For example, you might schedule MiniTool ShadowMaker to backup at 17:31 on Tuesdays and Fridays every week.
- In the second step, make a bootable recovery media.
- It is possible to prevent Windows 10 update by restoring Windows 10 to its prior state with MiniTool ShadowMaker bootable, which is simple and quick to use.
As soon as you’ve completed these steps, you may use the bootable rescue DVD to reinstall Windows 10 whenever you wish to undo the upgrade you made. Here are some tutorials that you might find useful:
- Instructions on how to boot your computer from MiniTool ShadowMaker Bootable
- System Image Restoration with MiniTool ShadowMaker
- How to Restore System Image with MiniTool ShadowMaker
The MiniTool program helps me to automatically back up Windows 10, which allows me to swiftly revert Windows 10 to an earlier version in order to get rid of the Windows 10 upgrade fast and easily. To send a tweet, simply click here.
If you’re reading this, I’m going to assume you already know how to prevent automatic updates in Windows 10. It is now up to you to put the solutions to the test. In the comment area below, please list any further workarounds you’ve discovered and the troubleshooting methods you used to resolve the issue. If you have any issues about the MiniTool program, you may send an email to the address shown below.
How to Block Specific Driver or Patch Updates in Windows 10
Because of the advent of Windows 10, Microsoft has taken a more aggressive approach to driver, functionality, and security updates in order to make it easier to keep a computer up to date. A key source of concern for Microsoft is the millions of Windows PCs that are not up to date with the latest security patches, resulting in a poor user experience and serious security risks. When you upgrade to Windows 10, Microsoft will automatically install all fixes, and users will not be able to simply postpone or prevent an update from occurring.
- It’s true that there is one part of the dispute that truly has some substance to it.
- If you ever experience problems with a driver update, Microsoft offers a solution for you.
- When this occurs, Microsoft has a specific tool available that will prevent the problematic update from being downloaded and installed automatically in the future.
- To use the troubleshooter, just download the file and double-click it to start it.
- A scan for available updates will be performed by the utility to determine which ones should be blocked.
- If you want to undo any actions you have done in the past, you can choose the second option to reveal any earlier changes that were concealed.
- The utility will be finished in a minute or less.
How to Stop Windows 10 Update Completely [2019 Guide]
Windows 10 users may have realized that they are constantly required to apply the Windows automatic updates, regardless of their choice (whether you like it or not). When you’re working on your computer, Windows automatically updates the system, and you have to restart the system frequently, using a significant amount of time in the process of upgrading and restarting.
Isn’t this a source of frustration? Don’t worry, this post will walk you through the simple steps to entirely halt the Windows 10 upgrade.
How Can I Disable Windows 10 Update?
Here are some options for you to consider. Not every option should be tried; instead, work your way down the list until you discover one that works for you.
- Measure the speed of your network connection in order to halt the Windows 10 upgrade. Disable the Windows Update service to prevent the installation of Windows 10. Change the Group Policy settings to prevent Windows 10 from being updated
- Change the Device Installation Settings to prevent the installation of the Windows 10 upgrade. Bonus Suggestion
Why I can’t stop Windows 10 auto update?
According to Microsoft, Windows updates will be delivered to customers’ computers and automatically installed if they are using the Home version. As a result, if you’re using Windows 10 Home, you won’t be able to turn off Windows 10 update. You have four ways for updating Windows in Windows 8.1 and prior versions: 1. Updates are installed automatically (Recommended) 2. Download updates, but decide when you want to put them in. 3. Check for updates, but give me the option to decide whether or not to download and install the updates.
Never check for new versions of software (Not Recommended) However, with Windows 10, these choices have been deleted, and you now have the ability to completely deactivate Windows 10 update.
Completely uninstall Windows 10 Update Assistant
You may have attempted the techniques listed below to halt the Windows 10 upgrade, but they have failed you at various points. One of the probable explanations is that the Windows 10 Update Assistant updates the settings on your computer, resulting in Windows 10 auto update functioning properly once again. Windows 10 Update Assistant should be totally uninstalled if it is currently installed on your machine. It is important to note that if you do not want to delete Windows 10 Update Assistant, you may disable it from the Task Scheduler.
- Make certain that each trigger in Triggerstab is disabled.
- 2) Locate the Windows 10 Update Assistant in the list of apps and right-click on it to pick Uninstall from the context menu.
- 4)OpenFile Explorer and choose This Computer from the drop-down menu.
- If the Windows 10 Update Assistant is installed separately from the rest of the operating system, you can remove the installation folder by going to the place where the Windows 10 Update Assistant is kept.
- 6)Go to This PCWindows and remove the directories called UpdateAssistantV2 and UpdateAssistant from the list of available folders.
- Then you may attempt the techniques listed below to halt the Windows 10 update, and they should be successful.
Way 1: Meter your network connection to stop Windows 10 update
Many people are unaware that there is a straightforward method of disabling Windows 10’s automatic updates. You have the option of configuring your WiFi network as a metered connection. So, if your PC is having trouble connecting to WiFi, you can attempt the following: 1) On your desktop, click theStartbutton in the lower left corner, then select theSettingsapp from the menu bar. 2) Select Network/Internet from the drop-down menu. 3) On the left-hand pane, selectWiFi, and then select the name of your Wi-Fi connection.
When you use WiFi, Windows will make the assumption that you have a restricted data plan, which is incorrect.
If, on the other hand, your computer is connected via Ethernet, Windows will assume that you have an unlimited data plan, and this method will not function. However, you may also use the techniques listed below to turn off Windows 10 update.
Way 2: Disable Windows Update service to stop Windows 10 update
The Windows Update service is responsible for identifying, downloading, and installing Windows updates and applications. Once deactivated, you will be unable to utilize the Windows automatic update capability, and apps will be unable to download and install themselves automatically. Several users have reported that it is difficult to turn off the Windows 10 update in the Windows Update service, and that the settings change every time your machine begins to install the Windows update. The Windows 10 Update Assistant is most likely to blame for this.
After you have successfully uninstalled Windows 10 Update Assistant, you may proceed to the following steps: 1) On your keyboard, simultaneously hit the Windows logo key and the letter R to bring up the Run box.
mscand hit the Enter key.
4) Select Disabled from the Start-up type drop-down menu.
5) If this is the first time you have stopped the Windows Update service, you may also need to complete the following additional step: Keep your cursor on the Recovery tab of the Windows Update Propertiespane, selectTake No Actionin the First failuresection, and then clickApplyandOK to save your changes.
Please keep in mind that if you disable the Windows Update service, your machine will not be able to get the latest updates.
You may thus enable the Windows Update service by going to Start > Control Panel > Services > Windows Update Service and selecting Automatic.
Way 3: Change Group Policy Settings to stop Windows 10 update
Altering the settings to prevent Windows 10 from automatically updating may also be accomplished through the use of the Group Policy Editor. Please keep in mind that Group Policy is only accessible in Windows 10 Pro and Enterprise editions; thus, if you are using Windows 10 Home, Group Policy will not be available on your machine, and you will need to resort to alternative solutions. 1) On your keyboard, simultaneously hit the Windows logo key and the letter R to bring up the Run box. 2) In the Run box, type gpedit.msc and press Enter.
4) Select Configure Automatic Updates from the drop-down menu.
Tips: If you need to upgrade your Windows version later, you may repeat the steps above and then selectEnabled to enable this function, which will allow you to continue to receive the updates as they become available.
It’s preferable to selectEnabled first, then select: 2 – Notify me when the download and auto installation are complete. As a result, you will receive notifications when a new Windows update is available, and you will be able to select when to download the update at your convenience.
Way 4: Change Device Installation Settings to stop Windows 10 update
Instead of allowing your computer to automatically update your device drivers, you may perform the following steps instead: 1) In the search box, type control panel and then click Control Panel to open the control panel. 2) Select the System option. 3) On the left-hand side, choose Advanced system settings. 4) Select theHardwaretab and then select Device Installation Settings from the drop-down menu. 5) Select No (your device may not function as intended) and then click Save changes. 6) 6) To complete the configuration, click OK.
Windows Update is a program that upgrades your computer so that you can improve the performance of your system and resolve some difficulties. Considering that Windows 10 update has been turned off on your computer, you should consider updating your device drivers in an attempt to keep your computer hardware in excellent working order while also improving speed. Tips: It’s conceivable that there are issues with some drivers, since outdated or missing drivers might sometimes create issues with your computer.
When it comes to updating your device drivers, there are two options: manually and automatically.
It is necessary to first visit the manufacturer’s website and search for the most recent right driver for the devices in question.
Then you’ll have to download and update them all by yourself.
If you are unfamiliar with the process of updating drivers, it is advised that you use Driver Easy.
Driver Easy is available in two versions: the FREE version and the Pro version.
The Pro edition, on the other hand, requires only two clicks (and comes with full support as well as a 30-day money back guarantee): 1) Download and install Driver Easy on your computer.
After that, Driver Easy will scan your computer and identify any problematic drivers.
Alternative: ClickUpdate All to have the program download and update all of the drivers that are either missing or out of date on your system (this needs thePro version; you will be requested to do so if you do not have the Pro version).
There are several strategies that may be used to halt the Windows 10 upgrade. I hope it is successful for you. If you have any queries, please leave them in the comments section below and we will see what we can do to assist you further.