How To Turn Off Touch Screen Windows 10

Contents

2 Ways To Disable Touch Screen In Windows 10

If your computer is equipped with touch screen capabilities, this feature is enabled by default. If you don’t require the touch screen functionality, you may turn it off. It will help you preserve battery power as well as some additional memory resources. Nowadays, a large number of laptops are equipped with a touch screen display and Microsoft Windows 10. This combines the best of both worlds by allowing you to utilize both a touch screen, similar to that of a tablet, and a keyboard and mouse, similar to that of a laptop.

Why disable or turn off touch screen in Windows 10?

However, while having a touch-enabled display has its advantages, there are occasions when you might prefer to simply switch off the touch screen in Windows 10. The following are some examples of scenarios:

  • You have caused damage to the laptop LCD, and the touch screen is now interfering with your ability to complete your task. Increasing the battery life of your system is something you want to do. It’s a good idea to turn off the touch screen in Windows 10 if you’re giving a presentation since you can wind up messing up your presentation by accidentally tapping the wrong slide. Problems with ghost touches, phantom touches, or phantom touches on the computer

An occurrence known as ghost touch, sometimes known as phantom touch, occurs when the touch screen reacts as if it has been touched by an unseen finger or pen. An fault with the hardware, or simply a filthy screen, may be the source of this problem.

How to disable touch screen in Windows 10

Disabling or turning off the touch screen in Windows 10 may be accomplished in two ways. We will go through both of them in this section:

Disable touch screen using Device Manager

You can disable the touch screen device from the Device Manager if you want to switch off the touch screen instantly but just for a short period of time. Here’s how it’s done:

  1. Open the Device Manager by pressing the Windows key + X + M. Human Interface Devices (also known as HIDs)
  2. Right-click on a touch screen that is compatible with the HID standard
  3. SelectDisable

To reactivate the touch screen, follow these steps:

  1. Open the Device Manager by pressing the Windows key + X + M. Human Interface Devices (also known as HIDs)
  2. Right-click on a touch screen that is compatible with the HID standard
  3. SelectEnable.

The touch screen is once again enabled when the system is restarted, according to several users who have complained that this approach only works momentarily. To permanently disable the touch screen, please complete the steps outlined in the following section.

Permanently Disable touch screen using Windows Registry

You should follow the instructions outlined below if you wish to permanently deactivate touch screen functionality in Windows 10.

  1. Windows Registry Editor (Run –regedit) should be launched. Select the following registry key from the list: ComputerHKEY CURRENT USERSoftwareMicrosoftWispTouch
  2. Create a new 32-bit DWORD item with the nameTouchGate in the right-hand pane. Make certain that the value of this item is zero. Restart the computer system.

After restarting the computer, the touch screen will no longer function. If you wish to re-enable the touch screen, modify the TouchGate value from 0 to 1 or simply delete the TouchGate entry from the configuration. Using a Microsoft Surface laptop with a non-functioning touch screen? Use this Microsoft troubleshooting tutorial to get it back up and running in no time! Is this information useful to you in deactivating the touch screen on your computer or other device? If you answered yes, what approach did you employ?

Additionally, see:

How to turn off the touch screen on certain Windows 10 devices, or turn it back on

  • It’s simple to switch off the touch screen on your Windows 10 smartphone if you find the functionality bothersome or if you’re not currently using it. It is necessary to go into the Device Manager and disable the “HID-Compliant Touch Screen” option in order to turn off the touch screen in Windows 10. More articles may be found on the Business Insider homepage.

As technology progresses, so do the capabilities offered to people who use personal computers at home. In today’s world, laptops with touch screen capabilities are rather ubiquitous, but not everyone finds them helpful or necessary, and some individuals prefer to turn off the touch screen on their laptops. Using a PC running Windows 10 to disable a touch screen couldn’t be any more straightforward. Here’s how you go about it.

Check out the products mentioned in this article:

1.Click on the Start button and then type “Device Manager” into the search field that appears. 2.The Device Manager app should be the first result that displays in the search results. To view it, simply click on it. Device Manager should be opened. Photograph courtesy of Jennifer Still/Business Insider The section “Human Interface Devices” will be expanded when you click on it in step three. 4.Hover your mouse over the “HID-Compliant Touch Screen” option and choose it with the right click. To turn off your device’s touch screen, choose it from the drop-down menu.

Your touch screen will be turned off at that point.

It is important to note that you may re-enable the touch screen capabilities on yourWindows 10computer at any time by completing the steps one through four above and then, instead of choosing “Disable device,” clicking “Enable device” and confirming your selection.

Related coverage fromHow To Do Everything: Tech:

Jennifer is a writer and editor from in Brooklyn, New York, who enjoys traveling, sipping iced coffee, and binge-watching television shows on Netflix. She has had articles published in Vanity Fair, Glamour, Decider, Mic, and many more publications. Jennifer Lstill may be found on Twitter under the handle @jenniferlstill. When you make a purchase after clicking on one of our links, Insider Inc. earns a commission.

How to Disable Touch Screen in Windows 10

Laptops with touch screen capabilities, such as the Microsoft Surface and other devices, are becoming increasingly popular. Although some people find it necessary or beneficial for their day-to-day duties, not everyone considers it necessary or useful. When you purchase a Windows device, the touch screen capability is typically activated out of the box, allowing you to browse the operating system of the laptop with your fingertips. If your laptop’s touch-enabled display is cracked, you find the function too distracting, or you simply don’t use it, you can quickly switch it off and continue working without interruption.

How to Turn Off the Touch Screen (Windows 10)

Users of tablets such as the Surface Pro will find the touch screen capability to be quite handy, although it may not always behave as expected. On occasion, you may wish to switch it off in order to extend the battery life of your laptop when you’re on the move or to diagnose a problem. You may deactivate the touch screen in a few simple steps using Device Manager, the Command Prompt, Windows PowerShell (in Windows 10) or by modifying the Windows registry, depending on your purpose for doing so.

Use Device Manager to Turn Off the Touch Screen (Windows 10)

When you install Windows 10, you will have access to a centralized application that will provide you with an organized view of all of the devices installed on your computer. Device Manager, which is an extension of the Microsoft Management Console, handles devices like as sound cards, hard disk drives, USB devices, keyboards, and other peripherals. Device Manager allows you to manage, update, and roll back drivers, as well as alter hardware configuration settings, find and resolve hardware device conflicts, and enable and deactivate hardware components.

  1. Starting from the Start menu, pick Device Manager from the drop-down menu
  2. Alternatively, type Device Manager in the search box and select it from the search results

It is important to note that depending on your Windows version, you can access Device Manager through the Control Panel. For this, click ControlPanel from the applications screen or the Start menu, and then selectHardware and Sound from the drop-down menu that appears. To access the Device Manager, go to the Devices and Printers section and selectDevice Manager.

  1. To make the section more expansive, select theHuman Interface Devicessection.
  1. SelectActiontab, and then selectDisable device from the drop-down menu. A popup window will appear informing you that deactivating the touch screen would prevent it from functioning properly. Confirm the operation in order to turn off the touch screen.

The touch screen has now been turned off, however you may still tap on the display to see how it works. Then, return to the Device Manager and right-click on HID-compliant touch screen, which will reactivate the touchscreen functionality.

Select theEnable device option and then confirm your selection with a checkmark. Keep in mind that if you encounter problems with your touch screen after activating it, restart your laptop and check to see if the problem persists.

How to Disable the Touch Screen Using Command Prompt

With the use of Command Prompt, you may easily deactivate the touch screen in Windows 10. Often referred to as CMD prompt, cmd.exe, or command shell in older versions of Windows, the Command Prompt is a command line interpreter in Windows 10 that executes whatever instructions you type into it. Automating operations, troubleshooting or solving specific Windows issues, and performing complex administrative duties are all possible using the commands, which make use of scripts and batch files. For those of you who have a Windows 10 PC and your mouse or laptop is not operating correctly, you may utilize the Command Prompt to deactivate the touch screen by typing cmd.

  1. This may be accomplished by typing cmd into the search box and selecting Run as administrator from the Command Prompt search results

This technique will open the Device Manager screen, and you may disable the touch screen by following the same procedures as in the Device Manager method.

Use Windows PowerShell to Disable the Touch Screen

A cross-platform command-line shell and scripting language introduced in Windows 8 that provides an easy method to automate operations and access system and management features is known as Windows PowerShell.

  1. Use Windows PowerShell to switch off the touch screen. To do so, right-click on the Start button and selectWindows PowerShell (Admin). You may also use the WIN+Xkeyboard shortcut to open PowerShell fast if your mouse isn’t working properly.
  1. After that, type the following command: Get-PnpDevice | Where-Object| Disable-PnpDevice -Confirm:$false
  2. Get-PnpDevice | Where-Object| Disable-PnpDevice

The touch screen will be deactivated, and you will be able to test it out to make sure it works properly.

Turn Off the Touch Screen Using Windows Registry

Another method of turning off the touchscreen on your PC is through the Windows Registry, which may be accomplished by following these instructions. Caution Should Be Exercised When Editing the Windows Registry: If you’ve never altered the Windows Registry before, you should get a professional to handle it for you since one incorrect item might cause your machine to become useless or impossible to boot. Assuming you’re satisfied with this procedure, make a backup of the registry first and then proceed as follows:

  1. SelectStartRunand typeregeditinto theRundialog box
  2. Then click OK.
  1. Make a note of where you are in the registry: ComputerHKEY CURRENT USERSoftwareMicrosoftWispTouch

Using the registry key, you may deactivate the touch screen in Windows 10. Image courtesy of wikimedia commons.

  1. Select NewDWORD 32-bit Entry from the right-hand window and label itTouchGate using the right-click mouse button.
  1. Double-click on the newly generated DWORD and then alter the entry value to 0 before restarting your computer.

Go back to the registry key, and update the TouchGate value to 1, or remove the TouchGate entry entirely, to enable the touch screen.

Turn Touch Off in a Few Quick Steps

We hope that this article was useful in enabling or disabling the touch screen on your Windows 10 computer or device. Take a look at our other Windows 10 unneeded services that you can safely stop, as well as our tutorials on how to turn off indexing to save CPU and RAM resources or how to turn off Cortana to safeguard your privacy and personal data, which can be found here.

How to Disable the Touchscreen in Windows 10

  • Device Manager may be found by typing it into the Windows Search box. SelectDevice ManagerHuman Interface Devices from the drop-down menu. After that, selectHID-compliant touch screenActionDisable Device from the drop-down menu. Keep in mind that if your device’s touchscreen is the sole way to input information, you should not disable it.

Using the instructions in this tutorial, you may deactivate the touchscreen in Windows 10. If your device’s touchscreen is the only input option available, do not turn it off or disable it. It is not necessary to disable the touchscreen on your laptop or 2-in-1 device if the keyboard and mouse are not working, or if you have a tablet that does not have a keyboard attachment. You will not be able to re-enable it unless you attach another form of input device to the computer.

How to Disable Your Touchscreen in Windows 10

Windows 10 allows you to deactivate touchscreens using the Device Manager, which can be accessed through the Control Panel or by typing “device manager” into the search box on your taskbar.

This is where Windows 10 manages all of your devices, and it’s also where you can deactivate or enable any device that’s linked to your computer with the use of the device manager.

  1. Go to your taskbar and click on the search box
  2. In the search box, type in Device Manager
  3. SelectDevice Managerfrom the list of search results that appears
  4. SelectHuman Interface Devices from the drop-down menu. Selecta touch screen that is HID-compliant
  5. ChooseActionin the upper-left corner of the screen
  6. Disable the device by selecting it from the drop-down menu. If the following warning appears, select Yes: This gadget will cease to work if it is turned off or disabled. Are you certain you want to disable it? Check to ensure that your touchscreen is turned off.
You might be interested:  How Long Does Windows 10 Update Take

To turn the touchscreen back on, repeat the procedures outlined above and selectEnablefrom the Action drop-down option in the Device Manager window, as seen in the screenshot below.

Reasons to Turn off a Touchscreen

When it comes to tablets and 2-in-1 devices, touchscreen inputs are the most convenient. If you feel that the touchscreen on your standard laptop is causing you more headaches than anything else, you may turn it off completely. When you’re attempting to watch a movie or complete some work, another reason to disable a touchscreen is to prevent toddlers from touching the screen. In addition, displays might fail and act as though you are touching them when you are not, which is frustrating. When using Windows 10, the technique for deactivating a touchscreen is the same across all devices, including laptops, desktop computers, tablets, 2-in-1 devices, and PCs from companies such as HP and Dell.

How Do I Turn Off Touch Screen

Touch screen displays provide important functionality and advantages that allow for a more streamlined and easy workflow to be achieved. A touch screen may have a significant influence on the way you use your laptop or display since it provides more support for movement and collaboration than standard displays. It can also help you feel more connected to your job and your leisure activities, as well. On the other hand, there are some scenarios in which it is preferable to turn it off entirely.

This is particularly handy while traveling or when there are individuals in the vicinity who may cause harm to the screen through incorrect use, such as children or other customers.

In this post, we’ll go through the two most straightforward and often used techniques for changing the functionality of your touch screen.

1. Deactivate using the Search Bar

The first technique takes use of the Search Bar inside the Windows interface, which is located next to the Windows/Start button on your computer and allows you to search for specific information. This solution makes advantage of a widely visible and often used feature of Windows, so it should be known to nearly all users, regardless of their degree of experience.

  1. Locate theSearch Barto the right of your Startbutton on your computer. Find it by looking for the small magnifying glass that appears next to the Windows logo if you are having difficulty finding it. Then, in the Search Bar, type “device manager,” and press Enter. From the list of results, selectDevice Manager. In the event that everything has been typed correctly, you shouldn’t have much to sort through. From the drop-down menu, choose ” Human Interface Devices “. Make a selection from the new sub-list for your touch screen display
  2. Select “Disable device” from the Action dropdown menu or by right-clicking the device. Click ” Yes ” to advance if a verification pop-up appears
  3. Otherwise, click ” No “

Now all you have to do is check to see whether your touch screen has been turned off. If you’re having problems getting your touch screen to shut off after several efforts, look up your model number and contact customer service for assistance.

2. Direct access via hotkeys or the Start menu

If you don’t want to utilize your Search Bar or if you don’t want to learn a new hotkey combination, this technique is fairly similar to the previous one and may even be somewhat easier for certain people to master.

  1. Alternatively, right-click on the Start button and hold down the Windows and X keys simultaneously. Using the drop-down menu that should appear in the lower-left corner of your desktop, selectDevice Manager From the newly opened window, select ” Human Interface Devices “. The touch screen display you want to use can be found in the sub-list. Select “Disable device” from the Action dropdown menu or by right-clicking the device. Click ” Yes ” to advance if a verification pop-up appears
  2. Otherwise, click ” No “

Make an attempt to validate if it has been effectively disabled using your touch screen.

If you want to turn your touch screen back on, simply repeat one of the two procedures above. If you are having difficulty deactivating your touch screen, contact the customer support staff for your product.

How to turn your touch screen display back on

In order to utilize your touch screen again once it has been deactivated, it is necessary to know how to reassign its activation to a different button. To accomplish this, go to the Device Manager on your computer. Simply repeat the steps outlined above, but this time you should see a new ” Enable device ” option when you choose your touch screen from the list of Human Interface Devices in the Human Interface Devices window. Then, in any pop-up windows that appear, confirm your actions by selecting ” Yes ” from the drop-down menu.

How do I turn off touch screen on Windows 8?

You can use one of the two ways described above if you are using Windows 8. For other operating systems, seek for specific instructions to ensure that your product is compatible and consistent with the system in question.

Why you may need to turn off touch screen

There are a variety of causes and events that may need the temporary deactivation of the touch screen. And they go beyond the issues we discussed previously, such as travel and large gatherings of youngsters. You may also encounter mechanical difficulties or be required to solve issues. When a significant failure occurs, such as when a touch screen is reading incorrect signals, touch screen inputs can sometimes behave erratically. In this situation, shutting off your touch screen is a required step if you want to continue using your smartphone while you wait for a professional diagnosis or repair.

Things to remember

When using a touch screen display, it’s important to understand that they might be more sensitive than their conventional equivalents. In spite of the addition of safety measures like as Corning® Gorilla® Glass, which protects against regular damage, any degree of use can have an adverse effect on your device. For the majority of users, this entails adopting a few simple precautions to keep their displays safe from harm. It may be necessary to switch off your touch screen in order to decrease exposure, whether from frequent use or to avoid the possibility of someone else harming the display.

About the Author

A contributing writer for HP® Tech Takes, Dwight Pavlovic has written for a variety of publications. Dwight is a music and technology journalist residing in the West Virginia state of United States.

How to enable or disable the touch screen on a laptop

Computer Hope’s last update was on June 6, 2021. A touch screen is an excellent choice for laptops because it allows you to browse the operating system with your finger instead of using a mouse. The touch screen on your laptop or Chromebook is enabled and switched on by default if the device is equipped with one. It is possible to manually switch on your touch screen if your touch screen is not functioning properly for whatever reason. Alternatively, if the touch screen is not responding correctly, you might try calibrating it.

Use the drop-down menus on the left to activate, calibrate, or disable the touch screen on your laptop or Chromebook, then follow the on-screen instructions.

In order to identify whether or not your laptop or Chromebook has a touch screen display, look at the specifications of your device.

It should be noted that there are no AppleMacBooks or desktop computers that enable touch screens. Except for the touch bar featured on the keyboard of some MacBook Pro models, there are no other notable exceptions.

Enable the touch screen

If your laptop or Chromebook’s touch screen is not responding, try activating it by following the instructions for your specific device.

Laptop – Windows 8 and Windows 10

  1. Expand and display the hardware devices under the Human Interface Devicesoption in the list by clicking on the arrow to the left of the option in the list that says Human Interface Devices. Locate and right-click on theHID-compliant touch screendevice in the list of devices

Note: If you do not see an entry for a touch screen that is HID-compliant in the Device Manager, it is likely that your laptop does not have a touch screen display. Note If you do not see the “Enable device” option in the pop-up menu, it is likely that the touch screen has already been activated and is not needed. Note If your touch screen is not responding, consider cleaning it to remove any debris, dust, or fingerprints that may have accumulated. Also, wash your hands well to remove any oils from them, and then dry them thoroughly before attempting to use the touch screen again.

It’s also a good idea to check the manufacturer’s website to see if there are any updated touch screen drivers available.

Laptop – Windows 7

  1. Then, after the Control Panel has been opened, select thePen and Touchoption. Select Touch from thePen and Touchproperties window by clicking theTouchtab button. Select the option “Use your finger as an input device” by checking the box.

Chromebook

Most Chromebooks offer a keyboard shortcut that allows you to switch between touch screen and keyboard mode. Toggling the touch screen and attempting to activate it may be accomplished by pressing Search + Shift + T. If the Search + Shift + Tshortcut does not work on your Chromebook, open theChromebrowser and typechrome:/flags/ash-debug-shortcutsin theaddress bar to activate thedebugging keyboard shortcuts option. To test if the Search + Shift + Tshortcut works, press the keys again. Note If the touch screen on your Chromebook is not responding, try cleaning it to remove any debris, dust, or fingerprints that have accumulated on it.

If it is still not working, it is possible that it is faulty and has to be replaced or fixed.

Calibrate the touch screen

Alternatively, if the touch screen is functional but not fully calibrated, you might attempt calibrating it to see if it helps to resolve the problem. To calibrate the touch screen on your laptop, follow the procedures outlined below. Please keep in mind that with a Chromebook, there are no touch screen calibration options available. Installing a third-party software from the Google Playstore that is meant to assist you in calibrating the touch screen may be an option.

  1. Open the Control Panel and look for and choose theTablet PC Settings item from the list. If you are viewing the Control Panel in the Category view, it is located under theHardware and Soundoption. Alternatively, you may access this feature by going to Tablet PC Settings and selecting the Display tab and then selecting the Calibratebutton.
  1. Follow the on-screen instructions as they are shown. Each time the crosshair icon appears on the screen in a new area, you are told to tap the icon on the screen.

Disable the touch screen

If you wish to turn off the touch screen on your laptop or Chromebook, follow the instructions for your specific device to turn it off.

Laptop – Windows 8 and Windows 10

  1. In Windows, go to Control Panel > Hardware and Sound > Device Manager. Expand and display the hardware devices under the Human Interface Devicesoption in the list by clicking on the arrow to the left of the option in the list that says Human Interface Devices. Locate and right-click on theHID-compliant touch screendevice in the list to choose it. In the pop-up menu, select theDisable device option

Note: If you do not see the “Disable device” option in the pop-up menu, this indicates that the touch screen has already been turned off.

Laptop – Windows 7

  1. To begin, go to the Control Panel. Then, under the Control Panel, select the Pen and Touch option. Select Touch from thePen and Touchproperties window by clicking theTouchtab button. Make sure that the option “Use your finger as an input device” is not selected.

Chromebook

Most Chromebooks offer a keyboard shortcut that allows you to switch between touch screen and keyboard mode. To turn the touch screen on and off, press Search + Shift + T on your keyboard.

If the Search + Shift + Tshortcut does not work on your Chromebook, open theChromebrowser and typechrome:/flags/ash-debug-shortcutsin theaddress bar to activate thedebugging keyboard shortcuts option. To test if the Search + Shift + Tshortcut works, press the keys again.

How to Disable Touchscreen in Windows 10 (3 Methods Explained)

Touchscreens are becoming increasingly widespread in Windows computers as a result of products such as the Surface Laptop Go and the upcoming Surface Pro 7+, among others. In the case of laptops with standard form factors, however, the judgment is still out on whether it improves or decreases productivity. You need not search any further if you are seeking for a solution to disable or turn off the touchscreen capabilities on your Windows 10 laptop. With the use of the Windows 10 Device Manager (devmgmt), PowerShell, the Command Prompt (cmd), and the Windows Registry, we will demonstrate how to deactivate (turn off) or enable the touchscreen on a permanent basis (regedit).

Disable Touchscreen in Windows 10 Laptops

If you have a Windows 10 laptop, convertible, or ultrabook, this article will teach you how to temporarily or permanently deactivate the touchscreen capabilities on your device. Suppose you change your mind and decide to give the feature another go, you can re-enable it by retracing your steps and going through the same settings and configuration options as before. As a result, without further ado, let’s have a look at three different methods for disabling or turning off the touchscreen feature on your Windows 10 computer.

Method 1: Using Device Manager

On your Windows 10 laptop, convertible, or ultrabook, this article will teach you how to disable the touchscreen capabilities temporarily or permanently. Suppose you change your mind and decide to give the feature another go, you can re-enable it by retracing your steps and going through the same settings and configuration choices you used the first time. With that said, let’s take a look at three different methods for disabling or turning off the touchscreen capabilities on your Windows 10 computer.

  • First and foremost, right-click on the Start button (or simultaneously press the Windows key and the X key) and pick ‘Device Manager’ from the popup menu

You may also access the Windows Device Manager through the Command Prompt and the Run dialog box, as previously mentioned. To do so, start by typing ‘devmgmt.msc’ (without the quotes) and pressing Enter. The Control Panel provides another method of gaining access to Device Manager.

  • To expand the ‘Human Interface Devices’ section of the Device Manager window, double-click on the heading.
  • Right-click on the ‘HID-compliant touch screen’ and pick ‘Disable device’ from the context menu. When prompted, confirm your identity. The touchscreen feature will be removed, and you will be able to confirm this by tapping on the display.
  • To re-enable the feature, just right-click on the same item and select ‘Enable device’ from the context menu. When you return, the function will be re-enabled and you will not receive a warning this time.

That’s all there is to it! It is that simple to enable or stop the touchscreen function on Windows 10 laptops by utilizing the Device Manager interface on the computer.

Method 2: Using PowerShell

PowerShell, which was introduced with Windows 8, is a command-line shell that allows you to execute a wide range of modifications and changes in Windows 10, including the ability to activate and disable the touchscreen. The same menu that was used in method 1 may be used to access it as well.

  • Right-click on the Start button (or simultaneously press the Windows key and the X key) and pick ‘Windows PowerShell (Administrator)’ from the popup menu that appears
  • Right-click on the Start button (or simultaneously press the Windows key and the X key) and pick ‘Windows PowerShell (Administrator)’ from the pop-up menu that appears.
  • If you want to re-enable the touchscreen functionality, use the following PowerShell command: Get-PnpDevice | Where-Object| Enable-PnpDevice -Confirm:$false
  • Get-PnpDevice | Where-Object|
You might be interested:  How To Make Windows 10 Faster

With this knowledge, you will be able to not only disable the touchscreen functionality on Windows 10 devices using PowerShell, but you will also be able to enable it using the robust command-line tool.

Method 3: Using Windows Registry (Permanent Method)

The touchscreen in Windows 10 may be enabled or disabled using the good old Windows Registry, which is still available today.

As of right now, this is the only technique available for permanently disabling the touchscreen on your Windows 10 computer. This is due to the fact that Microsoft is known to re-enable the function with every major update if it has been disabled via one of the other methods before.

  • Launch the Windows Registry Editor by pressing the Windows key + R. To do so, type “regedit” into the Windows Search Bar and then click on the first result that appears
  • Browse to the following key using the left pane of the Registry Editor window: ComputerHKEY CURRENT USERSoftwareMicrosoftWispTouch
  • Using the right pane of the Registry Editor window, navigate to the following key:

Please keep in mind that the aforementioned choice will only disable (turn off) the touchscreen feature for the currently logged-in user. Selecting “HKEY LOCAL MACHINE”as your top folder, rather than “HKEY CURRENT USER,” will deactivate the capability for all user accounts on that particular computer.

  • Using the right-click menu, pick ‘NewDWORD (32-bit) Value’ in the right pane and give it the nameTouchGate (without quotation marks).

Take note that if you choose LOCAL MACHINE instead of CURRENT USER in the previous step, you will be presented with an existing ‘TouchGate’ item. If this is the case, simply go to the next step.

  • By default, the hexadecimal value “0” should be assigned to the new key (in the case of CURRENT USER). To alter the value of LOCAL MACHINE to zero, double-click on the key that already has the value of 0. For the modification to take effect in either situation, you must restart the computer
  • You may re-enable the touchscreen feature by changing the hexadecimal value from 0 to 1 (0 indicates that the touchscreen is disabled, 1 indicates that the touchscreen is active). It is necessary to restart the computer in order for the modification to take effect.

There you have it. You should now be aware of the three separate methods for disabling and enabling the touchscreen functionality in Windows 10 devices.

Easily Turn Off Touchscreen in Windows 10

That’s what I was talking about earlier. You should now be aware of the three separate methods for disabling and enabling the touchscreen feature on Windows 10 devices in your possession.

How to Toggle the Touchscreen in Windows 10

If you have a touch-enabled device that is compatible with Windows 10, you may be wondering how to activate and disable the touchscreen on your system. Read on to find out. Even though it is not immediately visible, it is possible to turn off this function through the Device Manager interface. You can also toggle your touchscreen by making a convenient shortcut that will allow you to activate and disable it in a matter of seconds. Moreover,

How to Toggle the Touchscreen on Windows 10

When it comes to turning on and off your touchscreen, Windows 10 does not provide a straightforward method—you will not find anything in the Settings menu, for example. Because Windows 10 is continually developing and evolving, it is possible that this feature will become accessible in the near future as well. Though it’s rare, your system maker (such as Dell, HP, or Acer) may have included its own software to assist you in controlling the touchscreen on your computer. Please go to the user manual that came with your system or contact the manufacturer to see whether this is something that can be accomplished.

  1. To reach the quick access menu, press the Windows Key + X together. SelectDevice Manager from the drop-down menu. A new window will open, listing all of the devices that have been discovered on your system. In order to get a full list of available devices, double-click theHuman Interface Devices section. Disable the device by selectingDisable device from the context menu of the touch screen that is HID compatible. After that, you will see a warning notice informing you that deactivating this device will result in it ceasing to work. Because this is exactly what you’re looking for, clickYes to progress with the process. A single tap of the touchscreen will turn off the device, and no more action is necessary.

Do you want to switch on the touchscreen again? Simply repeat the previous steps, but this time selectEnable device instead of Disable device. It is possible that you may need to restart your computer in order for the modification to take effect.

How to Automate the Touchscreen Toggle

Having to go into Device Manager on a regular basis if you’re continually having to activate and disable your touchscreen is a pain in the neck. A shortcut that will automate the procedure can be created to counteract this problem. It’s a little difficult, so make sure you go through the directions thoroughly.

1. Install Windows Device Console

To begin, you must first download a piece of software known as Windows Device Console, or Devcon for short. Ordinarily, this would be included with Visual Studio Express, however that download is way too large for our needs. Joequery.me has done a great job of separating the program into a separate download. The site was also the source of this procedure, so many thanks to them for that as well.

  1. Download the Devcon program as a stand-alone application. Once the ZIP file has been downloaded, unzip it. To begin, navigate into thewindows8.1folder (it will work well for Windows 10, don’t worry), and then into the folder that corresponds to your operating system version: 32bitor 64bit. For more information on the version you have, see our guide to determining which bit version you have
  2. Enter C:WindowsSystem32 (change the drive letter if required) and hit OK after pressing the Windows Key + R to launch the Run window. Movedevcon.exe to the System32folder
  3. And, To access the properties ofdevcon.exe, right-click on it and choose Properties. Navigate to theCompatibility tab and double-check Run this software with administrative privileges.

2. Find the Hardware ID

It is necessary to determine the ID of your touchscreen before you can proceed with creating the automatic shortcut.

  1. Select Device Manager by pressing the Windows Key + X combination. The Human Interface Devices header should be double-clicked. Right-click theHID-compliant touch screendevice listing and selectProperties from the drop-down menu. Now that the Properties window is open, navigate to the Detailstab
  2. And SelectHardware Ids from theProperty drop-down menu on the right. The amount of money that will be of interest to you will be presented in the following format:

HIDVID PID COL Keep this window open for the time being. This is something we’ll get back to shortly.

3. Create a Batch File

Now you’ll develop a basic batch file to automate a system procedure that you’ll explain later. Specifically, the process in this situation is toggling the touch screen. Open Notepad and copy and paste the following into it: set “touchscreenid=ID HERE” devcon status “percent touchscreenid percent ” | findstr “running” if percent errorlevel percent = 0 if percent errorlevel percent = 0 if percent errorlevel percent = 0 (devcon disable ” percent touchscreenid percent “) unless otherwise specified (devcon enable ” percent touchscreenid percent “)

  1. Select thePropertieswindow that was left open in the last step and close it. Copy the relevantHardware Id by selecting it from the right-click menu. ID HEREin Notepad should be replaced with the value that you just copied to your clipboard
  2. In Notepad, selectFileSave As and give the file the name touchscreen.bat to save it. If you want to save it someplace else, a decent place to start would be in your Documents folder

4. Create a Shortcut

It’s time to transform this automatic batch procedure into a convenient shortcut by creating a shortcut for it.

  1. To create a shortcut, navigate and the file you just saved and right-click it to selectCreate shortcut
  2. Properties may be accessed by selecting the shortcut from the context menu. Double quote marks should be used to denote the route within the Targetfield. Then precede it with the command cmd.exe /C. The following would be an example of a target: cmd.exe /C “C:UsersJoeDesktoptouchscreen.bat”
  3. SelectMinimizedfrom theRundropdown so that Command Prompt does not appear every time you pick the shortcut
  4. SelectAdvanced from the drop-down menu and then checkRun as administrator. ClickOK
  5. Finally, press the OK button.

You may also create a keyboard shortcut that will launch the batch file when it is pressed. Within the Properties window, choose theShortcut key filefield and type a key combination that is not currently in use in the previous field. Perhaps something along the lines of CTRL + ALT + T. And now it’s finished! Create a shortcut to this file and place it wherever you like, such as on your desktop or in your Taskbar (you can drag a shortcut directly onto the Taskbar to pin it there). To use your touchscreen, simply double-click on the shortcut to launch a batch file that allows you to activate or disable it on the fly.

Troubleshoot a Faulty Windows 10 Touchscreen

Because Continuum, the feature that allows you to convert between desktop and tablet modes on Windows 10, may be used to deactivate the touchscreen when in desktop mode, it is possible that you might wish to disable the touchscreen when in desktop mode. Alternatively, it’s possible that your system includes touch capabilities that you just do not wish to use. Whatever the case, we hope that our guidance has been of use. Alternatively, it’s possible that you’re repeatedly turning the touchscreen on and off in an attempt to remedy the problem.

How to Resolve the Problem with Your Windows 10 Touchscreen Not Working Is your Windows 10 touchscreen not functioning properly?

Continue reading this article Joe Keeley is the author of this book (806 Articles Published) Joe was born with a keyboard in his hands and began writing about technology very shortly after birth.

Joe Keeley has more to say.

Subscribe to our newsletter

It’s possible that you’ve desired to deactivate your touchscreen when in desktop mode if you’ve been using Continuum, the feature that allows you to convert between desktop and tablet modes on Windows 10. Alternatively, it’s possible that your system includes touch capabilities that you just do not wish to use. If this information has been of use in any way, please let us know! It’s also possible that you’re repeatedly turning the touchscreen on and off in an attempt to remedy the problem. However, you should also attempt additional methods, such as upgrading drivers and running the Hardware and Devices troubleshooter, before concluding your investigation.

For Windows 10, here’s a step-by-step approach to fixing touchscreen problems.

As a full-time freelance writer, he uses his BA (Hons) in Business to make technology understandable to the general public. Joe Keeley’s Additional Contributions

How to Enable or Disable a Touchscreen on Windows 10

Touchscreens have only lately gained widespread acceptance in laptops and desktop computers. The ability to interact directly with your screen, on the other hand, can be quite beneficial at times, but it can also result in unintentional clicks or other complications on occasion. If you have an HP, Dell, or Lenovo touchscreen computer, you’ll probably want to toggle it on and off at various times during the day to accommodate your needs. Unfortunatelly, many Windows 10 touch screen laptops do not make this straightforward.

Making matters even more complicated, some manufacturers do not give an easy method of turning it off.

To demonstrate how to deactivate the touchscreen on Windows 10, we’ll walk you through the process.

Let’s get this party started.

How to Enable or Disable a Touchscreen on Windows 10 via the Registry Editor

Despite the fact that the registry editor may be harmful if not used appropriately, you’ll be OK if you first read our safe editing tutorial. At the end of the day, it’s a simple and quick approach to disable or enable touchscreen functionality in Windows 10.

  1. Start the Registry Editor by clicking on the Start button. Press theWindowsbutton to bring up the Start menu, and then type”RegistryEditor” into the search box. Select the first result from the list
  2. Locate and modify the TouchGate registry key if necessary. Paste the following text into the search bar of your Registry Editor: ComputerHKEY LOCAL MACHINESOFTWAREMicrosoftWispTouch If it doesn’t work, you may use the folder menu in the sidebar to move about. Once you’ve arrived at the correct location, double-click the “TouchGate” DWORD in the main pane and alter its”Value data” to “0” once more. When you’re finished, click OK to exit the program and restart your computer. You can create a new DWORD (32-bit) and call it TouchGate if you don’t see the TouchGate DWORD when you right-click on it in the main pane. Then follow the instructions above.

How to Turn on/Turn off a Touch Screen in Device Manager

If you find the registry to be a little scary, Device Manager might be your best friend in this situation. In Windows 10, it will provide you with a pleasant, clearly understandable interface from which you can effortlessly enable or disable your touch screen.

  1. Device Manager should be opened. Start by pressing the Start button and typing “Device Manager,” then selecting the top result. Disable the touch screen on your computer. The “Human Interface Devices”section of Device Manager may be found by scrolling down the page and clicking it to reveal the entire list. Locate the device titled “HID-compliant touch screen,” right-click it, and select “Disable device” from the pop-up menu
  2. Accept the instruction to turn off the touchscreen. “Disabling this device will cause it to cease operating,” warns the warning popup that appears in Device Manager. “Are you certain you want to disable it?” We have just what we want in this scenario, therefore we select “Yes” as the response. Enable your touchscreen in the Device Manager of Windows 10. In some cases, if your touch screen on your HP or Lenovo laptop does not function properly, it may have been automatically deactivated in Device Manager. This can occur if the program encounters a driver problem, for example, or if there is a resource dispute. Find the”Human Interface Devices”section in Device Manager, scroll down until you see “HID-compliant touch screen,” right-click on it, and select”Enable device”
  3. To re-activate it, use the same steps as above.

How to Enable a Touchscreen in Windows 10

However, if your touch screen does not remain enabled after you have tried the above approach, you may need to switch it on from the Device Manager properties menu. You will be given a wizard to follow as a result of this.

  1. Device Manager should be opened. Start by pressing the Start button and typing “Device Manager.” To open the top-ranked result, click on it. In the properties menu, select ‘Enable Device’ from the drop-down list. Locate the “Human Interface Devices”section in Device Manager and click the arrow to the right to expand the list of available devices. Select “HID-compliant touch screen” from the drop-down menu to view its properties, and then click “Enable Device” at the bottom of the”General”tab
  2. In the troubleshooting wizard, click on the ‘Next’ button. Select ‘Finish’ from the drop-down menu. Close the device properties dialog box.

How to Turn off a Touchscreen in Windows 10 with PowerShell

If you prefer to work from the command line, or if you’re working on a server installation that doesn’t have a graphical user interface, you may alter your Windows 10 touchscreen settings with PowerShell.

  1. PowerShell should be launched as an administrator. To enter the advanced Start menu, press “Windows + X” on your keyboard, then select “Windows PowerShell (Admin)”. It is critical that you run it as an administrator, otherwise Windows may not have the rights necessary to perform this modification. Disable the touchscreen by executing the appropriate instructions. Use the copy/paste shortcuts or right-click to paste the following command into your PowerShell window: Copy and paste shortcuts are enabled by default. The following commands are used: Get-PnpDevice | Where-Object| Disable-PnpDevice –Confirm:$false If you need to re-enable it, just swap out “Disable” with “Enable” in the following command: Get-PnpDevice | Where-Object| Enable-PnpDevice -Confirm:$false
  2. Get-PnpDevice | Where-Object|

This instruction, we hope, assisted you in resolving your problem if your touchscreen was not working. If it didn’t, please let us know by leaving a comment; alternatively, you might want to check out our instruction on how to enable the touch-friendly File Explorer.

You might be interested:  How To Factory Reset Pc Windows 10

How to Disable the Touch Screen in

Touch screen technology has gradually become more prevalent in laptops, and it is now almost universally included in Windows 10 tablets. Touch interactions are also possible on desktop computers, provided that they are equipped with a touch screen display. Windows 8 was particularly developed for touch screen devices, according to Microsoft. The mouse, on the other hand, is still widely used, and it appears to be here to stay for the foreseeable future, since touch screen laptops and desktop computers have yet to gain widespread acceptance.

It doesn’t matter what you like; this post will teach you how to disable or turn off the touch screen in Windows 10.

Disabling the Touchscreen in Windows 10

  1. In Windows 10, press Win key + X or right-click the Start Menu icon and selectDevice Manager from the context menu. SelectHuman Interface Devices from the drop-down menu to bring up a list of available devices. To access a category, you may also single-click on the symbol to the left of the screen. Look for the touch screen device entry
  2. Right-click theHID-compliant touch screenitem to open its context menu
  3. And then selectDisable device from the context menu that appears. After that, a popup appears asking for consent to turn it off. To turn off the touch screen, press the Yes button on your keyboard.

The actions outlined above should render your touch screen unusable, allowing you to use your mouse and keyboard without the risk of receiving any inadvertent touch responses from your screen after you’ve completed them.

Enabling the Touchscreen in Windows 10

If you ever need to turn the touchscreen back on, the procedure is much the same as before.

  1. Return to the Device Manager and choose HID-compliant touch screen from the context menu. If you want to restore your Windows 10 touch screen functionality, this time selectEnable device from the context menu. Please keep in mind that you will need to restart Windows 10 in order to reactivate the touch screen.

Why Turn Off the Touchscreen?

It’s understandable why someone might wish to disable this capability, especially for individuals who prefer to use a touchscreen rather than a mouse.

  • Touchscreen that is not working properly (also known as “Ghost touch”) — It will save you a lot of grief if you disable this function if your screen is responding as if it is being touched when it isn’t. It’s usually a good idea to disable the touchscreen if you have children or animals, such as a cat, that like to engage with your electronics in an unexpected way.

Additional FAQs

This phenomenon, which is also known as ghost touching, happens when there is a loose connection, a defective wire or cable, or a malfunctioning digitizer in the system (the part that you interact with on a touchscreen). Initial step should be a thorough cleaning of the screen; oil or other dirt can occasionally cause the screen to malfunction. Try restarting the device and trying again if it doesn’t work. Then you should try to reinstall the device’s drivers from scratch. If everything else fails, you may be forced to replace the digitizer entirely.

Please feel free to share your thoughts and experiences on the subject in the comments section below, so that the entire community can benefit from them.

How To Turn off Touch Screen on Windows 10, 8.1, or 7

Learn the quickest and most convenient methods for turning off the touch screen on Windows 10, Windows 8, and Windows 7. The introduction of Windows laptops with touch screen services is becoming more common in this age of smart technology. The touchscreen functionality on your laptop is a fantastic feature since it allows you to manage your system with your fingertips rather than a mouse. Despite the numerous advantages of using a touch screen, there are a few disadvantages as well. For example, you may accidentally touch your screen and end up destroying your presentations or the data on your Worksheet by doing so.

Fortunately, Windows laptops have the capability of doing so.

Let’s get this party started!

Along with this, we will go over a number of strategies for repairing the touchscreen (in the event that it is not functioning properly).

How to Turn Touch Screen off on Windows 10?

Customers frequently inquire about how to turn off touch screen on Dell computers running Windows 10 or how to turn off touch screen on HP computers running Windows 10. If you are experiencing the same problem, the following steps are for you. To switch off the touch screen on a Windows 10 laptop, you can use one of two methods described below. Either you may visit theDevice Manager to permanently deactivate the touch screen or you can use theWindows Registry Editor to permanently disable the touch screen.

A step-by-step guide will be provided to help us grasp both approaches. Examine these approaches to understand how to switch off the touch screen on an HP computer running Windows 10. If your HP laptop is experiencing a black screen problem, fix it immediately.

Method 1: Use Device Manager to Disable Touch Screen Temporarily

This approach necessitates the use of Device Manager in order to temporarily disable the touch screen functionality on your Windows 10 laptop. The methods listed below will guide you through the process of turning off the touch screen on a Dell computer running Windows 10.

  • To start “Device Manager,” press the keys “Windows + X + M” together on your keyboard. The “Human Interface Devices” section should be expanded now.
  • Select the “HID-compliant touch screen” option from the drop-down menu. Select “Disable” from the drop-down menu. When you get a confirmation pop-up, select “Yes” to proceed.

It is quite easy to stop the touch screen service on your Windows 10 computer if you follow these few simple instructions. If you want to activate it again, simply repeat the previous steps, but this time select the Enable option from the right-click context menu. Read this first: Windows 10 Shortcut Keys for Rotating the Screen and Shutting Down

Method 2:Use Windows Registry Editor to Disable Touch Screen Permanently

To input the registry key, we will use the Windows Registry Editor, which will be launched when we complete this approach. You may accomplish this by following the instructions outlined below to switch off the touch screen on Windows 10:

  • Press the “Windows” key to open the “Run” dialog box. In the text area, type “regedit” to restart the computer.
  • To continue, press the “Enter” key. The “Windows Registry Editor” will be launched as a result of this action. Afterwards, navigate via the registry key listed below:
  • ComputerHKEY CURRENT USERSoftwareMicrosoftWispTouch

Create a “DWORD 32-bit entry” on the right side of the screen using the name “TouchGate.” The value for this field should be “0.” It is possible to restart your device once you have completed the procedures outlined above. When your device has been correctly rebooted, you will find that the touch screen has stopped functioning. This demonstrates how to disable the touch screen on a Windows 10 laptop. You may repeat the process if you want to allow the touchscreen again by entering theTouchGatevalue as 1.

Another option is to delete theTouchGateentry from the database.

How to Turn off Touch Screen on Windows 8.1?

The touch screen service may also be turned off on computers running Windows 8.1 or Windows 8 operating systems. This may be accomplished using the ControlPanel. Follow these instructions to learn how to switch off the touch screen on Windows 8.1 and have a better understanding of the process.

  • Select the “Start” option from the drop-down menu. Select “Control Panel” from the drop-down menu. Select “Hardware and Sound” from the drop-down menu.
  • Choose “Pen and Touch” as your input method. When a new window appears, select the “Touch” tab to begin. Remove the check mark from the “Use your finger as an input device” checkbox.

The touch screen service will be deactivated as soon as this option is removed from the selection list. Following that, you will be able to operate your computer with your mouse. If you change your mind and desire to re-enable the touch screen, you may do so by repeating the procedures outlined above, but this time unchecking the box labeled “Use your finger as an input device.” Read this first: How to Fix the Blue Screen of Death Error on Windows 8.1

How to Turn off Touch Screen on Windows 7?

Turn down the touch screen service in Windows 7 by going to the Control Panel or the Device Manager. If you are unsure of how to switch off the touch screen on Windows 7, you should read through the following procedures.

Method 1: Launch Control Panel

The multi-touch gestures will be disabled using this technique, which will take us through the Control Panel choices. To find out more, follow these steps.

  • Select the “Start” option from the drop-down menu. Select “Control Panel” from the drop-down menu. Select “Hardware and Sound” from the drop-down menu. Choose “Pen and Touch” as your input method. When a new window appears, select the “Touch” tab to begin. Remove the check mark from the “Enable multi-touch gestures and inking” option
  • Now click OK. Press the “Apply” and “OK” buttons on your keyboard.

Following then, the multi-touch service will be discontinued. If you change your mind and desire to re-enable it, just select the Enablemulti-touch gestures and inking box once more to confirm your decision.

Method 2: Access Device Manager

You may disable the touch screen capability on your computer by going to the Device Manager, just like you did with Windows 10. Let’s see if we can figure it out.

  • Select the “Start” option from the drop-down menu. In the search bar, type “Device Manager” to find it. Navigate to the “Human Interface Devices” section. Select the “HID-compliant touch screen” option from the drop-down menu. Select “Disable” from the drop-down menu. Click on the “Apply” and “OK” buttons to complete the process.

Once completed, the touch screen will be turned off until you turn it back on again. You may disable the touchscreen in Windows 7 by following these steps. All you have to do is go to theDevice Manager or the Control Panel and disable the touch screen with a few simple clicks on the mouse. For Windows 7, you may use the same procedure as described above to turn on the touch-screen functionality. This is the whole technique for turning off the touch screen in Windows. Depending on your Windows version, you may use one of many techniques to turn off the touch screen service on your laptop or desktop computer.

In the event that you activate it in the future and the touch screen does not function properly, you can continue reading the blog to learn how to address the problem(s).

What If Touch Screen is Not Working?

Some users have reported that even if the touch screen service is enabled, it is not functioning properly. Drivers that are no longer supported may be the cause of this. If your touch screen is not reacting as intended, you can take the following steps to diagnose the problem. In this section, you will find solutions such as re-enabling the touch screen service, running the hardware troubleshooter, calibrating the touchscreen, and others. Take a look at the following steps to better comprehend these strategies.

Method 1: Turn off and on the Touchscreen

The easiest and most straightforward solution is to disable and re-enable the touch screen service. This may be accomplished using the Device Manager. Follow these steps to have a better understanding:

  • Make use of the “Ctrl” and “X” keys on your keyboard. Select “Device Manager” from the list of options. “Human Interface” should be selected twice. This will cause the dropdown menu to appear. Select the “HID-compliant touch screen” option from the drop-down menu. Press the “Disable” button to turn off the computer. To confirm, press the “Yes” button.

You will need to re-enable the touch screen because you have deactivated it previously. This may be accomplished by selecting the Enable option once more from the same list by clicking right on it.

Method 2: Run Windows Troubleshooter

You must re-enable the touch screen since you have deactivated it previously. In order to accomplish this, you must click right on the same list and select theEnable option once again.

  • To access the “Settings” application, press the “Windows” key plus the “I” key on your keyboard. Select the “UpdateSecurity” option from the drop-down menu. Click on the “Troubleshoot” button, which is found in the left pane. Select the “Hardware and Devices” option from the right-hand pane. Press the “Start the troubleshooter” button to begin.

When the troubleshooter begins to run, you may sit back and wait for the procedure to complete. After that, you may use the touch screen to double-check your work.

Method 3: Calibrate the Touchscreen

Changing the calibration of your touchscreen may be necessary if your touch is not reacting correctly or is operating slowly. The screen’s response time improves when the calibration is performed properly. Follow the actions outlined below to complete this process.

  • Fill up the blanks using “Calibrate” in the Windows search box. Then select the “Calibrate the screen for pen or touch” option from the drop-down menu. This will open a new window with further configuration options
  • Select the “Display” tab from the drop-down menu. Select “Setup” from the drop-down menu. To calibrate, press the “Calibrate” button.

The touch screen will be successfully calibrated as a result of this. Later on, you may check to see if your touch screen is functioning correctly. In the event that this solution does not work, you should consider updating the drivers.

Method 4: Upgrade Drivers

Computer drivers must be installed on your computer before it can function properly. If you have an old, corrupted, or the incorrect driver installed on your system, there is a potential that your touchscreen will not respond as expected.

As a result, you should double-check your drivers. If the drivers are not compatible with your system, you can swap them out. You should follow the actions listed below if you believe your drivers need to be updated.

  • Make use of the “Ctrl” and “X” keys on your keyboard. Select “Device Manager” from the list of options. “Human Interface” should be selected twice. This will cause the dropdown menu to appear. Select the “HID-compliant touch screen” option from the drop-down menu. “Update Driver Software” should be selected. Select “Automatically search for updated driver software” as your option.

Once you have done so, your system will begin looking for the driver and installing it for you automatically. If required, you can follow the directions displayed on the screen. This is a related topic:How to Automatically Update Drivers in Windows 10.

Method 5: Disable Power Management Settings

Despite the fact that Windows PC is designed to preserve energy, it may disable some activities such as the use of a touchscreen. In this case, you may just off the power-saving option to see if it helps. You can accomplish this by following the procedures outlined below:

  • Using the “Ctrl” and “X” keys on your keyboard, launch the “Device Manager.” “Human Interface” should be selected twice. This will cause the dropdown menu to appear. Select the “HID-compliant touch screen” option from the drop-down menu. Select the “Power Management” tab from the drop-down menu. Remove the tick from the box labeled “Allow the computer to turn off this device to save power” by clicking on it. Click on the “OK” button.

The saving power mode will be turned off as a result of this. Ensure that you restart your smartphone and verify the touchscreen once you have finished following these instructions. You can also experiment with various approaches to repairing the touch screen. You can, for example, roll back the drivers, delete recently installed apps, or relocate to a different area.

Closure

On a Windows computer, deactivating the touch screen is a simple process that can be completed in minutes. You can access the Windows Registry Editor, Device Manager, or Control Panel to do this operation. Different techniques for different versions of the Windows operating system have been offered in this article for you to choose from. By following these steps, you will be able to discover how to switch off the touch screen on your Windows computer. If it becomes necessary, you can turn on the touchscreen at a later time.

Do you want to see more guides like this on Windows?

  • How to perform CHKDSK on Windows 10
  • How to Change the DNS Server on Windows
  • How to Change the Time Zone on Windows

Leave a Comment

Your email address will not be published. Required fields are marked *