How To Uninstall Programs On Windows 10 That Won’T Uninstall

Contents

How to Uninstall Programs on Windows 10 That Won’t Uninstall

Uninstalling apps is possible with Windows 10, and there are a variety of techniques accessible to you for uninstalling a particular software. Using Windows 10, the newest and best in the long series of Windows operating systems, uninstalling a third-party application or software should be a straightforward process. The most popular and easiest technique to remove a software is provided here for those who just do not know how to uninstall an application on their computer. Follow the steps outlined below: –

  1. To access the Start Menu, locate it on the left-hand side of your Windows screen. Select “Add or delete applications” from the search results and then click on the settings page. In the process of looking for the uninstaller
  2. Discover and choose the software that you wish to delete, then double-click on it and select “Uninstall.” removing the software from your computer
  3. Follow the onscreen directions to complete the uninstalling process, and the software will be removed from your computer. Wait for the software to be successfully uninstalled before continuing.

It is possible to access the older uninstalling program if you are not using Windows 10, but are using a previous version of Microsoft’s operating system. Take the following steps:

  1. Hit and hold the Windows key on your keyboard for a few seconds, then press “R,” which should bring up the Run window. Now put “appwiz.cpl” into the search box and click enter. Using the Add/Remove Programs window
  2. When you do this, the old Windows uninstalling program should be launched. Simply locate the application you wish to uninstall, right-click on it, and select “Uninstall” from the menu that appears. removing the software from your computer
  3. As is customary, follow the on-screen directions. Check to check if the software has been completely removed.

However, sadly for Windows 10 users, the Operating System may fail to remove some third-party apps from time to time due to technical difficulties. When a Windows 10 user fails to uninstall an application that they themselves installed on their computer, they may be taken aback (and understandably so), and they may be unsure of what to do next. In the case of a third-party program or application that cannot be uninstalled by using the Add or remove programsutility or the Settingsapp, it is not the end of the world; there are a variety of different methods that can be used to uninstall programs on Windows 10 that cannot be uninstalled by using conventional methods.

Method 1: Use the uninstaller that came with the application

If the software you are attempting to uninstall does not appear in the uninstaller’s list, it is likely that the registry file associated with that program has been deleted from your computer. Fortunately, most (but not all) third-party tools and applications include an uninstaller that may be used to completely remove them. In their root folder, they include an executable tool called uninstall.exe. This utility is essentially an uninstallation wizard, and it may be used to remove any programs associated with them from the machine on which they have been installed.

  1. Navigate to the location on your computer where the software or application in issue has been installed and run it from there. As an illustration: – the default directory for most third-party apps is eitherX:Program Files (x86)(Name of application) orX:Program Files (x86)(Name of application), with X in both directories being the letter corresponding to the partition of your computer’s hard drive on which Windows 10 is installed
  2. Locate an executable uninstallation utility by searching through the directory’s contents. This tool is typically called uninstaller.exe or uninstall.exe (or something similar) when it is executed. Having identified the executable uninstallation program, double-click on it to start it up
  3. Maintain your attention to the onscreen instructions until you reach the end of the uninstallation process, at which time the wizard will remove any programs that you were unable to delete using traditional means. Procedure for uninstalling

Method 2: Remove the program from your computer using the Registry Editor

With every third-party software or application that you download and install on your computer, a large amount of data is stored in your computer’s Registry. Remove all traces of a program from your computer’s Registry, and the program is effectively removed from your computer, essentially uninstalling it. It is possible to uninstall a software from your computer by using the Registry Editor if you are experiencing difficulties with the traditional methods of removing it. In order to accomplish so, you must:

  1. To open aRundialog, press the Windows Logokey + R at the same time. The Registry Editor is launched by typingregeditinto theRundialog and pressing Enter. Navigate to the following directory using the left pane of the Registry Editor: HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall
  2. To remove a program or application from your computer, look in the left pane of the Registry Editor for the sub-key corresponding to the software or application you wish to uninstall from your computer under theUninstallkey
  3. Once you have discovered the sub-key associated with the program or application you wish to remove (it may or may not be named exactly the same as the target application), right-click on it and select Delete from the resultant context menu. To confirm the action, select Yes from the subsequent popup window. If you have successfully eliminated the sub-key that corresponds to the target program, you should quit the Registry Editor and restart your computer.

When the computer first starts up, check to see if the targeted application has been effectively deleted from your computer by running a command prompt as administrator.

Method 3: Uninstall the target application with your computer in Safe Mode

If you are experiencing difficulties removing a program on Windows 10, it is possible that third-party involvement is the source of your difficulties. The safest and most effective approach to eliminate any and all forms of interference on a Windows machine is to start it in Safe Mode. The only things that may operate on a Windows computer while in Safe Mode are the operating system’s stock apps and services – even internet access and the Command Prompt are blocked in some versions of Safe Mode, for example.

While your computer is in Safe Mode, it is possible that you will be able to remove an application that you would otherwise be unable to delete using conventional means. If you want to utilize this approach, you must do the following:

  1. In the event that you are experiencing difficulties removing a program on Windows 10, it is possible that third-party involvement is the source of your difficulties. Starting a Windows PC in Safe Mode is the most effective technique to eliminate any and all forms of interference. The only things that can operate on a Windows machine when in Safe Mode are the operating system’s stock apps and services — even internet access and the Command Prompt are blocked in some Safe Mode implementations. It’s possible that when your computer is in Safe Mode, you’ll be able to remove an application that you wouldn’t be able to delete using normal techniques. When utilizing this technique, you must do the following:

Safe Mode will be activated when the machine first starts up. As long as your computer is running in Safe Mode, you may try to remove the target application from your computer by following any of the two sets of instructions given and discussed at the very beginning of this tutorial. If the removal is unsuccessful, restart your computer.

Method 4: Use a third-party uninstallation program to uninstall the target application

If all else fails and none of the techniques given and detailed above work for you, you may still try to uninstall the target application by utilizing a third-party uninstallation software, which can be found online. A plethora of various third-party tools for Windows 10 have been developed expressly to make it not only feasible but also simpler for users to remove applications, andRevo Uninstaller happens to be one of the very finest ones in this regard. To uninstall the targeted application usingRevo Uninstaller, you must first do the following steps:

  1. Remove all traces of the application you wish to remove by hitting the keys Ctrl+Shift+Esc to bring up the Task Manager, identifying and right-clicking on the process belonging to the target application in theProcesstab, and selecting End taskfrom the ensuing context menu. To obtain the installation forRevo Uninstaller, go to this page and click on “Free Download.” Once the program’s installer has been downloaded, travel to the location where it was saved, locate it, and double-click on it to launch it. To install the application, follow the on-screen directions and go through the installer until it has been successfully installed. Activate the Revo Uninstaller
  2. When the Revo Uninstaller program launches, it will display a list of all of the third-party apps that have been installed on your computer. Double-click on the application you wish to remove from your computer’s list to open it and complete the uninstallation process. Yes should be selected in the subsequent dialog box to confirm that you really do wish to remove the specified application. In the dialog box that appears, Revo Uninstaller will present you with a choice between four alternative Uninstall Modes from which you may select. Built-inmode only attempts to remove the target application using the uninstaller that was provided with it. Safemode has all of the functions of Built-inmode, as well as a light check of the computer’s registry and hard drive for files and registry entries left behind by the target software, and it may be used to boot into Windows. Moderatemode’s incorporates a variety of elements. Safe mode performs all of the functions of Normal mode with the addition of a deep and thorough scan of the Registry and hard drive for remnants left behind by the targe application, and Advanced mode performs all of the functions of Normal mode with the addition of a deep and thorough scan of the Registry and hard drive for remnants left behind by the targe application. Choosing Advancedmode and then clicking on Next is highly recommended. After you have waited for Revo Uninstaller to build a system restore point and complete other necessary adjustments, click on the Next button
  3. Select Uninstall from the drop-down menu. The uninstallation wizard will be closed after the uninstalling procedure has been finished by clicking on the Close button.

WhenRevo Uninstaller has finished completely uninstalling the target application and removing all of its files and registry entries from your computer, you can closeRevo Uninstaller, restart your computer, and verify that the target application has been completely uninstalled once your computer has booted up. In addition to being a proactive and self-motivated information technology specialist, Kevin also possesses extensive understanding of all areas of network infrastructure design, implementation, and management.

Windows 11 en Windows 10: Verschillende methoden om problematische programma’s en apps te verwijderen

Almost everyone is convinced that by removing their unused programs and apps, their computers would run faster and more smoothly, which will result in fewer problems. Programa’s and applications that have been deprecated may still retain certain aspects of their original functionality or may even become inoperable. It is sometimes necessary to do this in order to fix software that has become defective. Programa’s that interact with other programs are known as bestanden delen. The creation of notifications that are written in other programs and that are executed at a level that is inaccessible to the general public.

You might be interested:  How To Upgrade Windows Vista To Windows 10 For Free Without Cd

Back to the top of the page

Methode I – Voer het verwijderingsprogramma van de programmafabrikanten uit

When it comes to getting rid of old programs and apps, the majority of people are convinced that doing so makes their computers run faster and with fewer problems. Programa’s and applications that have been deprecated may still retain certain aspects of their original functionality or may fail to do so. Occasionally, this is done in order to fix software that has developed a bug. Software that interoperates with other software is called a “bestanden delen.” The creation of messages that are written in other programs and that are executed at a level that is inaccessible to the general public.

There are 10 different methods for removing programs from your computer, including the complete removal of programs that are no longer used on your computer, that I have included below. Back to the top of the hill

Methode II – Voer de verwijdering uit vanuit het Configuratiescherm

Make use of the verwijderprogramma that has been included into Windows 11 and Windows 10.

  1. Start the program by pressing the Start button. To access the settings, select Settings from the drop-down menu. Select opApps from the drop-down menu. Select Apps and then expand the menu on the left-hand side of the screen. Select the program or application that you wish to disable from the list that will be displayed
  2. Click OK. Click on the button Verwijderen, which will cause the selected software or application to be uninstalled from your computer. Follow the instructions on the screen in order to complete the verwijderen process.

Methode III – Verwijderen na afsluiten van programma of app in Taakbeheer

Make use of the task management functionality that has been built into Windows 11 and Windows 10.

  1. For Taakbeheer to be opened, use the keys CTRL+SHIFT+ESC simultaniously on your keyboard. It must all be on the tabbladProcessenstaan
  2. Select the program or application that you wish to disable from the list of available options underProcessen
  3. SelecteerEindtaak (using the right mouse button) on the program/app you’re working with. Now, try to re-enter the verwijdering code into the program/application again.

Methode IV – Voer de verwijdering uit vanuit de veilige modus

Start the computer in the secure mode and try to implement the verwijdering while in this mode:

  • Windows 11 and Windows 10 may be started in a secure mode.

Methode V – Voer de probleemoplosser voor het installeren/verwijderen van Microsoft uit

Download the Microsoft problem-solving application for the purpose of erasing your computer’s hard drive:

  • There are solutions to problems that prevent programs from being installed or uninstalled
  1. Make use of the problem-solving software on the computer in question. To open the venster, click on the koppelingGeavanceerdin het venster that will be opened
  2. By selecting the appropriate option, the repairs will be carried out automatically. If you need more specific information, you may set the vakReparaties to be automatically updated and then click on the next button
  3. However, this is not recommended. Selecteerverwijderen
  4. Choosing a software from the list that you will not be able to remove is a good idea. (In the event that this is not the case, controleert u on een vermelding dieniet wordt vermelden selecteert u dat in stead of deze.) After that, select the following option: Next
  5. Follow the instructions displayed on the screen.
  1. If the software is not responding, you can attempt to have it disabled again
  2. However, this is not recommended. It indicates that the problem could not be identified and that you have the ability to provide comments on the program, as well as to close the application. You can, however, provide information based on the koppelingGedetailleerde informatie. To receive a report, you must first click on the link. Following your selection of the opVolgendeop het rapportscherm, you will be sent to a scherm. You may use this section to pick the repairs that you want to carry out in the software that you want to uninstall. Make certain that the software is available and that the selection criteria are clearly marked. In order to carry out these repairs, contact Klikop Volgende. You must next obtain a report to determine whether or not the experiment was successful.

Methode VI – Een verwijderprogramma van derden gebruiken

With the help of a search engine, you may almost always find a generic verwijderingstool developed by others, or a tool that is specifically designed for the software or application that you are attempting to disable. Dell warns against using third-party software unless you are certain that the vendor is trustworthy and that you have confidence in the software’s use. The use of these programs, which are frequently carriers of infection with your computer, or the use of these programs in an injudicious manner, might result in the occurrence of system problems with your computer.

Methode VII – Systeemherstel uitvoeren

Systeemherstel is a program that may be used if you have Herstelpunten on your computer that have been inactivated. Using this approach, you may restore your computer to a previous date prior to the installation of a certain software component on your computer. However, all other programs that have been installed within the same time period will be disabled as a result of this. More information can be found at the following telecommunications link:

  • Microsoft Windows 10 installation or installation of Windows 10 on a Dell pc on the same day

Methode VIII – Vooraf geïnstalleerde items verwijderen

You may disable an application by selecting it with the right mouse button in the Start menu and pressing the Verwijderen button. In the event that this is not available or does not function, you can use the opdrachtprompt or PowerShell, which are both Command Line Interfaces (CLIs) that are available. Keep in mind that the opdrachtprompt and PowerShell are both powerful tools, and that you have the ability to make changes to your machine that may have an impact on its performance. Dell advises against the use of a command-line interface (CLI) unless you have prior experience with it.

  1. First and foremost, you must log into the CLI with administrator privileges.
  1. This may be found in the Start menu. You may also use the rechtermuisknop to choose the Start button, which will open a menu of the hoofdgebruikers and allow you to select the item from there. If you want to use PowerShell, you may pick it from the Start menu by clicking on opdrachtprompt or PowerShelltypes and then selecting it from the list that is shown.
  1. Fill up the blanks with the following information (where AppName is the name of the program that you wish to disable): Get-AppxPackage *AppName* | Get-AppxPackage *AppName* | Remove-AppxPackage In order to generate an AppNames list, you must first do one of the following actions: The following command: Get-AppxPackage | ft name, PackageFullName -AutoSize

Methode IX – Clean Ghosts from the Control Panel (Methode IX – Ghosts reinigen vanuit het Configuratiescherm)

When you use the Configuratiescherm, you will be able to see possible restrictions on programs and applications that have already been disabled. This occurs most frequently when a component of the software or application is missing from the system’s database. We recommend that you go to the registry and have the tekenreeks removed from your system. You can use a search engine to look for a registerreiniger from the past in order to remove the remaining tekenreeks from your computer’s memory. Even when you are using third-party software, you run the risk of having your computer infected.

If you are unable to determine what the tekenreeks is doing, I would not recommend that you use a reiniger on the problem. The deletion of data from a computer’s database may result in system problems on the machine in question. Back to the top of the page

Methode X – Probleemupdates verwijderen

Recent Windows Update-archives may be removed from the Apps and Underdelen sections of the Configuratiescherm, just as you would do so in a program or application. For some more in-depth information, I directed you to the following link, which will allow you to share the article with others:

Can’t uninstall program on Windows 10 using apps & features

You can try the free version of Revo Uninstaller to see if that will get rid of it. Virginia is known as the “Time Lady.” This reply was useful to 47 people. Did you find this reply helpful? Sorry if this wasn’t of assistance. Great! Thank you for taking the time to provide comments. What level of satisfaction do you have with this response? Thank you for your feedback; it allows us to make improvements to the site. What level of satisfaction do you have with this response? Thank you for taking the time to provide comments.

  • Uninstall the software by selecting it and pressing the Uninstall button.
  • What is the best way to completely uninstall software on Windows?
  • -Windows and Devices for Information Technology twitter/adacosta groovypost.com The following response was useful to 385 people: Was this response of assistance?
  • Great!
  • What level of satisfaction do you have with this response?
  • What level of satisfaction do you have with this response?
  • If Revo uninstaller is unable to resolve the problem, you may be required to reinstall the software before attempting to uninstall it.

Return for this free service by selecting “Yes” beneath the post that was useful or that resolved your problem on the previous page of our website.

Sorry if this wasn’t of assistance.

Thank you for taking the time to provide comments.

Thank you for your feedback; it allows us to make improvements to the site.

Thank you for taking the time to provide comments.

10 tips for removing a program that won’t uninstall

Maintaining the cleanliness and order of your computer is necessary for two main reasons: the health and well-being of your computer, and your own personal hygiene. A slew of undesirable applications may slow down your computer and make it sluggish, and a cluttered desktop will have the exact same effect on your mind as a cluttered desktop. Yet removing applications from your computer isn’t always straightforward; sometimes they leave unwanted traces behind, sometimes they’ve gone bad and refuse to uninstall, and sometimes they’re things that Microsoft is confident you’ll like to the point where they make them virtually impossible to remove.

Come along with us and learn about 10 different ways to completely uninstall programs, batch remove old software, remove objects that won’t uninstall, and even permanently delete pre-installed Windows components from your computer.

When you need to remove an application, the Windows Control Panel is normally your first port of call. However, this is not always sufficient in some cases.

1. The traditional way

If you’ve been working with Windows for any length of time, you’re probably familiar with the standard techniques for removing applications. If a software has a dedicated uninstaller, it may be accessible through the Start menu, a separate folder on your computer’s hard drive, or as a shortcut on your computer’s desktop. More frequently, you’ll go to the Control Panel and uninstall software from the Programs and Features area, which will (usually) launch the uninstaller for the product you’re trying to uninstall.

If anything does not appear to be uninstalled from the control panel, go to step 9 to determine if there is a viable solution.

Using this strategy, on the other hand, you’ll immediately run into difficulties.

2. Removing preinstalled items

Microsoft has a strong desire to provide you with software of doubtful utility. Because it is so confident that you will simply like that program, it does not provide a way to delete it at all — try using the right-click approach to uninstall, for example, 3D Builder or Groove Music, and you will be completely unsuccessful. You may, on the other hand, buckle yourself in and utilize PowerShell to complete the task at hand. Locate it in the Start menu under Windows Powershell, right-click it, and select ‘Run as administrator,’ then type the following commands to delete it from the system (in this example) 3D Architect: ppxPackage *3dbuilder* |

ppxPackage *3dbuilder* Simply said, Get-AppxPackage looks for the required program, then the pipe symbol feeds its output into Remove-AppxPackage, which removes it; the phrase enclosed by the asterisks may be substituted with the exact package names for a variety of otherwise uncooperative apps, including:

  • 3D Builder (sometimes known as 3dbuilder): 3dbuilder
  • Windows Alarms and Clock:windowsalarms
  • Windows clock
  • Calendar and Mail are provided by windowscommunicationsapps
  • The camera is provided by windowscamera. Music for the groove: zunemusic
  • Maps: windowsmaps
  • MoviesTV:zunevideo
  • OneNote:onenote
  • sPeople:people
  • Photos:photos
  • Store:windowsstore
  • For example, voice recorder:soundrecorder
  • Xbox application:xboxapp

If you ever decide that you want these applications back, simply use the following powershell command: Get-AppXPackage | ForeachThird-Party Program are two examples of third-party programs. 10AppsManager offers you complete control over Windows’ default applications and eliminates the need to fiddle with the command line in order to do so.

3. An easier way

While rolling up your sleeves and physically removing fundamental Windows components is an option, there are faster and more convenient methods to accomplish the task. Doing so manually also puts you in the situation of having to replace each and every one of those programs, then laboriously removing those you don’t want, in the event that you ever feel the need to reinstall them all again. 10AppsManageris an excellent option since it allows you to delete all of the preloaded programs that cannot be uninstalled (as well as those that can) from an one location.

If a file is currently in use, Windows will lock it down, preventing you from deleting it. If you encounter this difficulty, Unlocker can assist you in regaining access.

4. Picking locks

Windows intelligently restricts access to some files that are presently in use; for example, if you attempt to remove a program that is already running, Windows will instead display an error message stating that the file is currently in use. You may also see hostile and unhelpful notifications such as ‘Access has been denied,’ or you may hear mention of sharing infractions. Fortunately, User Account Control has helped to mitigate this problem to some extent, although it continues to occur. Locked files can be easily unlocked with Unlocker.

You might be interested:  How To Change User Name On Windows 10

It will inform you which applications are presently accessing that file and will give you the option of either killing the offending processes (which is hazardous) or removing the locks on the file (less so).

Windows Safe Mode allows you to uninstall unwanted apps that are typically launched at the same time as Windows itself.

5. Safe mode

Most of the time, the applications that lock down your system are the same apps that start up with your computer and run in the background. You can utilize Windows’ Safe Mode, which reduces the amount of time that your computer spends running and, if you select the proper option, disables your machine (or issue programs) from communicating with the internet, allowing you to (hopefully) get rid of them without those pesky locks. With Windows 10, you may access Safe Mode by holding down the Windows key and selecting Restart from the Start menu, just as you would normally.

Once you’ve gotten into the program, try to uninstall it using either the Control Panel or the software’s own uninstaller.

6. Go back in time

System Restore has been a crucial component of Windows for many generations, and it is a vital utility in the event that something goes wrong with your computer. However, you will need to be proactive in order to restore your system to the exact state it was in previous to catastrophe hitting. This will involve some proactive behavior (as well as a small amount of hard drive space) in order to accomplish. Consequently, unintentional or faulty installations may be undone using System Restore, but only if you remember to create a restore point before starting the installation process.

It is possible that you will need to restore your system from a backup if you are in serious problems. Many free solutions are available that make it simple to build a comprehensive backup and restore it in an emergency situation if necessary.

7. Restore from a backup

When using System Restore, it is only beneficial if your computer is easily accessible and you are able to access it. System Restore will not be able to restore your system if a software has left it fully insensible – it is not a true backup in the traditional sense, but rather a record of the modifications done to your system. A complete backup, on the other hand, may be the difference between life and death. We have a strong preference for Macrium Reflect Free for this task. When cloning one drive to another (you’ll need an external drive that’s at least as large as your boot drive), it’s very useful.

  1. Keep in mind, though, that this is a time-consuming operation; generating a whole fresh backup will take several hours, and your computer will be idle during this time.
  2. Even when a software is effectively uninstalled, it is possible that certain files and folders be left behind.
  3. When you activate its Hunter Mode, it will search through your directories for files that it believes are connected to software that is no longer installed on your computer’s hard drive and remove them.
  4. You may also use Revo Uninstaller to terminate already operating programs or to prevent software from starting up automatically.

9. Cleaning the Control Panel

It’s possible that you’ll see references to software that you’ve previously uninstalled or deleted in the Control Panel. Often, simply ‘uninstalling’ these ghost references will be sufficient to remove them, but occasionally they require a bit more encouragement to be removed. If you’re feeling very bold, you may look around in the Windows registry (HKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersion). Uninstall holds the entries pertaining to software that is to be installed, and if there is anything in here that you know you have previously deleted, you may safely delete its key to prevent Windows from believing it is still present.

If a Windows Update has caused problems on your computer, iObit Uninstaller can assist you in reverting to a prior version.

10. Removing problem updates

Windows is in for a difficult assignment, given that it is required to handle a vast array of hardware components in an even greater variety of conceivable configurations. Windows has a massive work ahead of it. That’s why it shouldn’t come as a surprise when an update comes along and completely messes things up: either it has prevented your machine from properly entering hibernation, or it has caused another problem. Removing updates is another operation you could, technically, perform yourself by battling through the Programs and Features area of Control Panel, but you’ll find it a lot simpler if you use the services ofIObit Uninstaller, which can also deal with the tedious work of maintaining system restore points.

How To Uninstall Programs That Won’t Uninstall on Windows 10

Since Windows is required to handle a vast array of hardware components in an even greater variety of configurations, the operating system is in for a difficult task ahead of it. In light of this fact, it’s not altogether shocking when a new update rolls out and causes havoc: perhaps it’s prevented your computer from properly entering hibernation or messed up another function. It is possible to remove updates manually using the Programs and Features area of Control Panel, but it is far more convenient to use IObit Uninstaller, which can also deal with the tedious work of maintaining system restore points, which is covered in more detail below.

Use Settings to Uninstall Windows 10 Programs

The built-in Settings app on Windows 10 is the quickest and most convenient way to uninstall installed programs. If you’ve been unsuccessfully attempting to uninstall your programs using the Control Panel or another way, check Settings; it may be able to effectively remove your software.

  1. By hitting the Windows+I keys simultaneously, you may launch the Settings application on your computer. Pick an application from within the Settingswindow.
  1. You’ll be able to see all of the programs that you’ve installed. Locate and choose the software that you wish to uninstall
  2. To uninstall an application, selectUninstallnext to the program’s name in the program list
  1. Simply follow the directions on the screen, and your software will be uninstalled.

Use Control Panel to Remove Windows 10 Apps

If you are unable to use Settings, or if that app is unable to uninstall your apps, you should try using the Control Panel instead. This is the most common method of uninstalling applications from Windows PCs.

  1. Activate Control Panel by opening the Startmenu, typing Control Panel into the search box, then selecting Control Panel from the search results
  1. Remove an application from the Control Panel by selectingUninstall a programunderPrograms.
  1. Select the software that you wish to uninstall
  2. SelectUninstallfrom the list of apps at the top of the screen.
  1. In the confirmation box that appears, select Yes to indicate that you truly want to delete the software.
  1. To complete the procedure, simply follow the on-screen directions.

Use Your Program’s Uninstall Tool

Numerous applications are included with an uninstaller that is specifically designed for that application. It is possible to entirely uninstall the software from your computer by employing this utility. If the Settings or Control Panel do not function properly for you, it is worthwhile to use this utility. The procedure for using the uninstall tool differs depending on the software. Most of them, on the other hand, have an uninstall or remove option that allows you to completely remove the software from your system.

For example, the uninstall utility for theAvidemuxtool is titled Uninstall Avidemux VC++ 64bits.exe and it is placed in the following directory: Uninstall Avidemux VC++ 64bits.exe Avidemux 2.7 VC++ 64bits is located in the C:Program FilesAvidemux folder.

Close the Program and Then Uninstall It

One of the reasons you are unable to uninstall an application is if the application is currently operating on your computer. The majority of the time, Windows prevents you from removing applications that are already operating in the front or background on your computer.

To go around this problem, forcefully close the program and uninstall it from the Settings or Control Panel on your computer. Make careful to save any unsaved work before closing the application. If an application refuses to close, use these steps to force it to close:

  1. Right-click the Windows taskbar and selectTask Manager from the drop-down menu that appears.
  1. In Task Manager, locate and choose theProcessstab. Locate the program that won’t shut down and select End task from the context menu.
  1. Use eitherSettingsorControl Panelto delete the software from your PC

Use the Program Install and Uninstall Troubleshooter

The Microsoft Program Install and Uninstall troubleshooter may be used to resolve uninstall difficulties on your computer. It is available for download from the Microsoft website. If you are having trouble deleting an application from your computer, use this utility and your troubles should be fixed.

  1. To reach theProgram Install and Uninstallpage, open a web browser on your computer and navigate to it. Install the free software on your computer
  2. To use the tool, double-click the downloaded file to launch it. On the first screen of the tool, click Next.
  1. Wait for the tool to identify any problems with your system. When your applications list displays, choose the faulty item from the list and then click Next. Please selectNot Listedat the top of the page if your program is not mentioned here
  1. The utility will then assist you with uninstalling the selected software from your computer.

Utilize Command Prompt to Uninstall Programs That Won’t Uninstall

Another option for removing apps from your computer is to use the Command Prompt. When you use this program, you may enter a command that causes the utility to remove the chosen application from your computer.

  1. Command Prompt may be accessed by opening the Startmenu, looking forCommand Prompt, and selectingRun as administrator.
  1. When theUser Account Controlprompt appears, selectYes. Then, in the Command Prompt window, type the following command and press the Enter key: wmic
  1. Enter the following command: product get name into the command line and press Enter. Make a note of the name of the software you wish to uninstall from the list that appears
  1. Run the following command to uninstall the troublesome program: uninstall-program.exe Uninstall the product when the name=”PROGRAM” is specified. Change the word PROGRAM to the real name of the program that you noticed before

Remove Programs That Won’t Uninstall From Windows 10’s Safe Mode

If your program continues to refuse to remove, it’s possible that a third-party process is interfering with the removal process. Use Windows 10’s safe mode to check whether this is the case and to ensure that the program is successfully removed.

  1. By tapping the Windows key and the I key, the Settings application will be launched. On theSettingswindow, click on theUpdateSecuritybutton.
  1. Then selectRecovery from the left-hand sidebar. SelectRestart nowunderAdvanced startupon the right
  1. When your computer restarts, you’ll be presented with the Choose an optionscreen. Navigate to the TroubleshootAdvanced options section from here. Select Restart from the Startup Settings menu.
  1. Boot your computer into safe mode by selecting the number 4 on the following screen
  2. When your computer is in safe mode, you may use either the Settings or the Control Panel to uninstall the recalcitrant software
  3. Restart your computer to restore it to its default settings.

Programs That Won’t Uninstall Can Indeed Be Removed

Problematic applications may be found anywhere, and some of them are stubborn enough to refuse to leave your computer. If you ever come across one, you will know precisely what to do to put an end to your relationship with it. When you’re finished, you might want to think about clearing up space and boosting the speed of your computer.

3 Ways To Uninstall Programs That Won’t Uninstall In Windows 10

Your current location is: Home»Windows 10»3 Methods for Uninstalling Programs That Refuse to Uninstall in Windows 10 Do you wish to uninstall a software from your Windows 10 computer, but the computer is refusing to cooperate? You want to remove a software in Windows 10, but the program does not appear in the Control Panel or Settings. Why is this? Throughout this tutorial, we’ll go over three simple techniques for uninstalling apps that simply won’t go away. Method number one of three

Use Program Install and Uninstall Troubleshooter by Microsoft

It is a free software provided by Microsoft for Windows 10 and older versions that allows you to uninstall and delete apps that are preventing you from doing so using the Control Panel or the Settings app. The Program Install and Uninstall Troubleshooter can assist you in repairing corrupted registry keys on 64-bit versions of Windows, repairing registry keys that control the update data, addressing issues that prevent you from installing new programs and uninstalling old programs, and addressing issues that prevent you from updating your software.

  • Program Install and Uninstall Troubleshooter is a simple program to use.
  • It’s important to note that this troubleshooter is intended solely for conventional desktop programs and cannot be used to uninstall built-in apps or apps downloaded from the Windows 10 Store.
  • Install and Uninstall Troubleshooter on your computer and then click the Next option to proceed.
  • Step 3:When you see the message “Are you experiencing trouble installing or uninstalling a program?” choose the Uninstalling option from the menu.
  • Select the software that you wish to remove and then press the Nextbutton on your keyboard.

Within a few seconds, the software should be completely removed from your computer. When we conducted our tests, we discovered that Program Install and Uninstall is the most effective method available for removing obstinate apps. Method number two of three

Use GeekUninstaller to remove the program

This free Microsoft software for Windows 10 and older versions of Windows allows you to uninstall and delete apps that are refusing to uninstall using the Control Panel or the Settings app, among other things. In addition to assisting you in repairing corrupted registry keys on 64-bit versions of Windows, the Program Install and Uninstall Troubleshooter can assist you in repairing registry keys that control the update data, addressing issues that prevent new programs from being installed or old programs from being uninstalled.

  • Program Install and Uninstall Troubleshooter is a simple program to use.
  • It’s important to note that this troubleshooter is only intended for conventional desktop programs and cannot be used to uninstall built-in apps or apps downloaded from the Windows 10 Store.
  • Install and Uninstall Troubleshooter on your computer and then click the Next button to proceed to Step 2.
  • To uninstall a software, go to the “Are you experiencing trouble installing or removing an application?” prompt and select Uninstalling.
  • Step 4: Once you’ve chosen the software you wish to remove, click the Next button.
  • Our research revealed that Program Install and Uninstall is the most effective technique for removing obstinate apps currently available.
You might be interested:  How To Delete Files On Windows 10

Use CCleaner to uninstall programs that you won’t uninstall

Uninstalling apps that you are unable to uninstall using the Control Panel or Settings may also be accomplished with the famous CCleaner free edition. The nice part of CCleaner for Windows 10 is that it can also remove default Windows 10 applications that you cannot uninstall using the Settings app.Step 1:Download and install CCleaner for Windows 10 on your computer.Step 2:Go to ToolsUninstall and choose it. Select the software or application that you wish to delete from your computer and then click the Uninstall button.

How to Force Uninstall Programs on Windows 10/11 Computers

Uninstalling apps that you are unable to uninstall via the Control Panel or Settings may also be accomplished with the famous CCleaner free edition. In addition, CCleaner for Windows 10 can remove default Windows 10 programs that you are unable to uninstall using the Settings app.Step 1:Download and install CCleaner for Windows 10 on your computer.Step 2:Go to ToolsUninstall and click on it.

When you have selected the program or application that you wish to delete from your computer, click the Uninstall button. When you see the confirmation window, click the OK button to confirm your selection.

Force Uninstall Programs

There are a variety of approaches you might use to complete the task. I’ll guide you through a few different approaches, and you may select the one that suits you best.

Control Panel

This is possibly one of the most antiquated approaches that you and I both employ on a regular basis. It is quite simple to give it a shot. Step-1: To open the Runbox, press the Win + R keys at the same time. Step-2: Enter the filename appwiz.cplan and click Enter. The third step is to locate the software you desire to uninstall in the programs and features window that appears. Step-4: Right-click on it and select Uninstall from the context menu. (On Windows 10 PCs, the choice will be labeled Uninstall/Change for your convenience.

Force Uninstall Programs in Command Prompt

Step-1: Go to the Start menu and put cmd into the search box. When the command prompt option appears, select Run as administrator. (If you are using a Windows 11 system, click on the magnifying glass in the search bar and type cmd; if you are using a Windows 10 system, click on the Start menu.)Step-2:When the command prompt option appears, select Run as administrator.Step-3:You will be asked whether you want to allow this app to make changes to your device. Then type the following and press Enter:wmicStep-5:Now type the following and press Enter:product get name(The outcome of this command may take a while, so be patient)Step-6:You will receive a list of the names of the various applications that are currently installed on your system; clickYes.

If you do not want to confirm your choice, click Yes.

Force Uninstall Programs in Registry Editor

Before you attempt this procedure, please consider the following warning. The Registry plays an important role in the running of the system. Making a mess of this software might result in irreversible consequences. Make sure you have generated a system restore point before proceeding with this procedure. For those who are not comfortable with this strategy, I recommend that you try another one instead.

  1. Shortcut keys are used to open the Runbox. Ctrl + R
  2. Win + R
  3. Typeregeditand hit the Enter key
  4. This software will ask you whether you want to give it permission to alter the settings on your device. ClickYes
  5. Type the following path into the address bar at the top of the editor and press Enter: Type the following path into the address bar at the top of the editor and press Enter: ComputerHKEY LOCAL MACHINESOFTWAREMicrosoftWindowsCurrentVersion Uninstall
  6. Under the Uninstall key in the left pane, you can discover a list of the many apps that have been installed. Locate the software that you wish to remove from your computer. Locate the application and then pick Delete from the context menu that appears. Restart your computer system.

Safe Mode Uninstallation

It is possible that an application is interfering with the functioning of the computer, and that this is causing the uninstallation problem. You can start your computer in safe mode and then remove the software using any of the methods listed above. If you don’t know how to boot into Safe Mode, follow the instructions below and then use any of the removal options that are provided to complete the uninstalling process.

  1. Using the Win + Ishortcut keys, go to the Settings menu. You may also access the settings by going to the Start menu and then clicking on theSettingscog icon in the menu bar. To access the Settings cog in Windows 11 computers, click on the Windows symbol in the taskbar, then click on the Settings cog. SelectUpdateSecurity. (In Windows 11, choose Windows Update from the left-hand pane, and then select Advanced options from the right-hand pane. )
  2. Recovery can be found in the left pane. (In Windows 11, the Recovery option will be located in the Additional options section of the right pane.) This should be chosen.)
  3. The Advanced starting option may be found in the right pane by clicking onRestartnow
  4. Then selecting Troubleshoot
  5. Then selectingAdvanced
  6. Finally selectingStartup Settings
  7. Then clickingRestart. Safe Mode may be accessed by pressing any of the keys (4,5, or 6) once the Startup menu appears.

Once you have entered Safe Mode, you can experiment with the ways and then remove the software.

Troubleshoot

A Microsoft Troubleshoot application can assist you in identifying and resolving the issue that is producing difficulties during the uninstallation process.

Download the troubleshooter from this link and follow the on-screen directions to run the program successfully. This should, in theory, resolve the uninstallation errors.

System Restore

A system restore point that was created before you installed the program may also be helpful in resolving the problem. However, bear in mind that restoring to an earlier point will result in the loss of any further applications or settings that you may have installed after the restore point was established.

Third-Party Apps

If none of the techniques listed above are successful, you can obtain a third-party installation app, which you can then use to uninstall the program. Various applications are available to complete the task, with Revo being one of the most often used. Simply download and install this software using the provided link, and then remove the program that is causing the issues. I hope this information is useful and that you are able to forcibly remove apps from your PC. Please share your thoughts in the comments section below.

6 Tips to Fix Unable to Uninstall Program Windows 10 Issue

Having trouble uninstalling an application in Windows 10? This guide will show you how to uninstall a program that will not uninstall using one of the six alternatives listed below. Learn how to remove a software in Windows 10 by using the force uninstall feature. The professionals at MiniTool, a leading software developer, create expert data recovery software, hard drive partition management software, as well as system backup and restoration software for its customers. In general, you may quickly uninstall a software in Windows 10 through the Control Panel, Settings, or the ” Add or delete programs ” menu in the Start button.

There are no known reasons for why a software can’t be uninstalled on Windows 10, but you may try one of the six techniques listed below to force an uninstall of a program that won’t uninstall on the operating system.

Fix Unable to Uninstall Program Windows 10 with 6 Tips

  • You may access the Registry Editor on Windows 10 by pressing Windows + R, typingregedit, then pressing Enter. Then, on the left panel, follow the instructions as follows: Remove the program from the HKEY LOCAL MACHINE/SOFTWARE/Microsoft / Windows / CurrentVersion/Uninstall directory. Locate the target program’s subkey under UninstallRight-click the application and select the Delete option from the context menu. To accept the process to remove the registry key associated with the software you wish to uninstall, select Yes from the drop-down menu. To put the modifications into effect, restart your computer. In addition, be certain that the software has been successfully removed from your Windows 10 machine.

It is recommended that you back up the registry first before performing any registry altering, because messing with the Windows Registry may be quite hazardous to your computer. If you make a mistake when modifying the registry, your computer may become unresponsive. Be cautious when editing the register. For a better gaming experience, learn how to download and install DirectX 12 (Ultimate) on your Windows 10 or Windows 11 computer. In this tutorial, you will also discover what DirectX 12 (Ultimate) is.

Tip 2. Start Windows 10 into Safe Mode to Uninstall the Program

Third-party processes may be interfering with the uninstall process if you are unable to uninstall a program in Windows 10. If this is the case, contact Microsoft Support. Solution: Start your Windows 10 PC in Safe Mode and then uninstall the software while still in Safe Mode. After you have learned how to boot into safe mode on Windows 10, you may attempt to remove the application via the Windows 10 Control Panel or Settings menu, if that is what you prefer. The following is a step-by-step guide on how to download the Microsoft Store app for your Windows 10 or Windows 11 computer.

Tip 3. Use the Application Own Uninstaller to Uninstall It

You may also try to remove the software using the application’s own uninstaller if you are using Windows 10. The uninstaller for most third-party apps is an executable file that may be found in the program’s installation directory.

In most cases, it may be found in the application’s root folder. Learn how to use the uninstaller in Windows 10 to force the uninstallation of an application that won’t remove on its own.

  • In File Explorer, navigate to the location where the software was originally installed. It’s possible to find out where the target program is by right-clicking the target software icon and selectingProperties from the context menu. Next, look for an executable file with the names exe, uninstall.exe, or anything similar in the directory. Use the uninstaller exe to open the software that won’t remove in Windows 10
  • Simply double-click it to start it up and follow the on-screen directions to complete the uninstallation.

Tip 4. Use Microsoft Program Install and Uninstall Troubleshooter

Microsoft provides a free program called Program Install and Uninstall Troubleshooter. You may use it to troubleshoot the problem of being unable to remove a software from the control panel in Windows 10.

  • Run the Microsoft Program Install and Uninstall Troubleshooter that you may get on the Microsoft website. When you encounter the message “Are you experiencing difficulty installing or uninstalling a program?” click Uninstalling
  • You may view a list of the apps that are currently installed on your Windows 10 machine in the pop-up window. Choose the software that you will not be able to delete using the standard methods, and then click the Next button. Then choose Yes, attempt uninstall to begin the process of removing the selected software. Hopefully, this will assist you in uninstalling the software that is refusing to remove in Windows 10

Note that this utility only allows you to remove classic Windows desktop apps and does not allow you to uninstall built-in applications or programs that were downloaded from the Microsoft Store. How to remove a software using the CMD (Command Prompt) or PowerShell utilities on Windows 10/11 is covered in detail in this article.

Tip 5. Try Third-party Tools to Force Uninstall Program Windows 10

You may also use a free software uninstaller for Windows 10 from a third-party website. Uninstallers such as Revo Uninstaller, Geek Uninstaller, CCleaner, Wise Program Uninstaller, IObit Uninstaller, and others are among the best free program uninstallers available.

Tip 6. Perform a System Restore

It is possible to do a System Restore on your Windows 10 computer in order to restore it to a point before you installed the software. However, before you execute a system restore, you should make a backup of all of the vital data stored on your computer. Alternatively, you may clickStart, type system restore, and selectCreate a restore point, after which you can click theSystem Restorebutton and follow the on-screen directions to restore your system to a prior state

Bottom Line

For those who find themselves unable to remove a program through Windows 10’s Control Panel, Settings, or Start menu, you may use one of the six solutions provided in this guide to force an uninstall of a software that won’t uninstall in Windows 10.

Leave a Comment

Your email address will not be published. Required fields are marked *