Where Is System Restore In Windows 10


How to use System Restore in Windows 10

(Photo courtesy of Shutterstock.) It is critical for all PC users to understand how to utilize the System Restore feature in Microsoft Windows 10. In the event that your computer begins to crash, display error messages, or even refuses to boot at all, a System Restore can prove to be an invaluable resource. System Restore, which was first introduced in Windows Me in 2000, works by creating “restore points,” which allow you to restore a malfunctioning computer — including its system files and settings, installed programs, and the Windows registry — to a previous point in time when it was functioning properly.

It used to be that System Restore instances were generated automatically once a week, but now that Windows 10 has been released, an instance is only created when a major event occurs on your computer, such as an application update, a driver installation, or a system configuration being modified.

  • How to check the health of your laptop battery in Windows 10
  • How to check the specifications of your computer in Windows 10
  • If System Restore fails, here’s how to reinstall Windows 10.

Given how important System Restore is, it’s puzzling that Windows 10 keeps it hidden away in the System Properties area of the Control Panel and doesn’t even enable it by default. It is now included as part of a bigger function known as System Protection, making it much more difficult to locate. If something goes wrong with your computer, we’ll show you how to enable System Restore in Windows 10, how to manually create a return point, and how to use a restored state in order to restore your computer to a fully operating condition.

How to use System Restore in Windows 10: Turn on System Protection

As previously stated, System Restore is turned off by default in Windows 10 by default. It’s possible that you won’t understand this until you try to undo a modification and discover that you are unable to. Learn how to enable System Protection, which includes the System Restore utility, in the following steps. 1. In the Windows 10 search box, type “system restore” and then select “Create a restore point” in the results list. (Photo courtesy of Microsoft) 2.Clicking on the System Protection tab will cause the System Properties dialog box to appear.

(Photo courtesy of Microsoft) “Turn on system protection” may be found in the Restore Settings section.

However, because Windows 10 manages disk space consumption automatically, you won’t need to be concerned about this until your hard drive is running out of space on its own own.

(Photo courtesy of Microsoft) Click Apply, then OK to enable System Restore and close the System Protection box for your primary system drive.

Whenever a substantial update is made to your system, Windows 10 will now automatically generate a restore point to protect your data. If you wish to switch on System Protection for your other drives as well, repeat steps 2 and 3 for each of them.

How to use System Restore in Windows 10: Create a restore point

Although Windows 10 creates restore points for you automatically, you may wish to build a restore point manually before making any significant changes to your computer. For example, you could want to make some changes to your system settings or run a potentially dangerous download. Here’s how you go about it. Re-run step 1 from the previous section in order to bring up a System Protection dialog box. To build a system restore point, choose the drive for which you want to create it and click the Create button.

  • Give your restore point a descriptive name so that you can remember what it was called afterwards.
  • To proceed, click the Create button.
  • Because of the large amount of data that has to be saved, this process may take some time.
  • To depart, click the Close button.

How to use System Restore in Windows 10: Restore your system

In most cases, you shouldn’t have to restore your system very often, but if your computer starts acting strangely, such as when it crashes often or when particular functions stop working, here’s how to erase unwanted changes by restoring Windows to an earlier configuration. In the same method we mentioned previously, open the System Properties box and click on the “System Restore” button, which can be found on the System Protection tab. If the restore point option is grayed out, it means that you do not have any restore points accessible to you.

  • Select the restore point to which you wish your system to be restored and click OK.
  • To proceed, click the Next button.
  • If you do this, your system will be restored to the excellent functional condition that existed at the time the point was made.
  • (Photo courtesy of Microsoft) It’s also important to note that System Restore cannot be halted while it’s running.

How to use System Restore when your Windows 10 PC won’t boot

If your computer does not correctly boot up to allow you to run System Restore, or if it crashes very immediately, you may run the utility from the “Advanced startup settings” menu in Windows 10. Using this way, you may access System Restore, as seen below. 1.Start or restart your computer, and then hit the F11 key while the computer is starting up. Alternatively, when restarting your system, hold down the Shift key on your keyboard. A blue screen will display, prompting you to “Choose one of the available options.” “Troubleshoot” is the option to choose.

In either case, choose System Restore from the drop-down menu.

(Photo courtesy of Microsoft) 3.Select your Windows account, type in your password, and then click Continue to proceed. The System Restore wizard will be launched as a result of this. As previously mentioned in the preceding part, you may now restore your PC to its prior state of operation.

  • More information:How to set up a Kill Switch in Windows
  • If the PC Health Check does not function, here’s how to check for Windows 11 compatibility. How to rename several files at the same time in Windows 10
  • God Mode in Windows 10 and 11
  • How to Enable God Mode
  • It’s possible to keep your computer awake without touching it. How to change the color of the Command Prompt in Windows

Tom’s Guide’s How-To Editor is Robert Irvine. He lives in New York City. He began authoring tutorials about software, hardware, websites, and other technology issues back when dial-up modems were still in use, and he has served as the editor of Web User magazine in the past. Robert adores cooking and can whip up a good sausage casserole, but he is in no way comparable to the celebrity chef of the same name who has become a household name.

Windows 10 basics: how to use System Restore to go back in time

In the past, I worked as a freelancer for a firm that was seeking to establish a presence in the United States market for its relatively unusual hardware items and required a native English speaker to make minor changes to the content on its website. Everything was going swimmingly until my second week on the job, when I went to the site and discovered that I was now seeing strange advertisements flashing across my screen and that I had lost access to my security software. I needed to get rid of whatever it was that had infiltrated my body.

But I had a backup plan: I could utilize System Restore.

You will be able to return your computer to that point in time if required.

I didn’t have much luck with restore points in previous versions of Windows, but as has been the case with many other components of the operating system, System Restore has been improved over time.

Set up System Restore

It is necessary to enable System Restore and establish a restore point before you can make use of the feature.

  • Create a restore point by typing “system restore” into the search area on your taskbar, which will bring up the best result, “Create a restore point.” To do so, simply click on it.

Find and pick “Create a restore point” from the drop-down menu.

  • This will bring up the System Properties window (which will appear pretty dated when compared to the rest of Windows 10’s present interface), which you may customize. You’ll be on the System Protection tab at this point. If you’ve never used System Restore before, all of the buttons will be grayed out, with the exception of “Configure,” since you won’t know what you’re doing. To begin, ensure that your available drive (typically the C: drive) is highlighted, and then click on “Configure.”

To configure System Restore, select “Configure.” from the drop-down menu.

  • Select “Turn on system protection” from the “Restore Settings” drop-down menu. If you choose, you may specify the maximum amount of disk space that will be needed for your restore points
  • Older restore points will be erased to free up space if you don’t specify a limit. Depending on the size of your hard disk, 1GB to 5GB of free space is usually adequate. “OK” should be selected.

Select the amount of disk space you want to assign to System Restore.

  • You’ll find yourself back in the System Properties window again. If you want to create a new restore point right away, click on the “Create.” button
  • Name your restore point in the pop-up box that appears, and then click “Create.” It shouldn’t take more than a minute or two for another pop-up to appear, stating that “The restore point was successfully generated.” Click on the “Close” button.

You have the option of naming your restore point. And that’s the end of it! Consider the fact that Microsoft says fresh restore points are only produced when you “install a new software or driver,” or when you “install a new Windows update.” Alternatively, you can complete the steps outlined above each time you wish to establish a restore point on your computer. Take, for example, the case when you’re preparing to conduct an experiment with your system. In addition, there are ways to have your PC automatically generate a restore point each time it boots up, but doing so requires dealing with the PC’s registry, and this article will just cover the essentials of doing so.

Use a restore point

So, let’s imagine you’ve just installed a new game on your computer, which then proceeded to spread advertisements and other irritating stuff across your system.

When you realize you made a mistake, it’s time to use your restore point to return to a previous time.

  • Create a restore point by typing “system restore” into the search area on your taskbar, which will bring up the best result, “Create a restore point.” Once you’ve done that, you’ll be sent back to the System Properties window and the System Protection tab. This time, select “System Restore” from the menu. You’ll see a pop-up box labeled “Restore system files and settings” appear on your screen. After you click on Next, you’ll get a list of all the different restore points that have been made, along with the date and time they were generated, what they were titled, and whether they were produced manually or automatically. Identify the one you’d want to revisit

Select the restoration point to which you wish to go back in time.

  • Alternatively, you may click on “Scan for impacted apps” if you wish to (and it’s a good idea). This will provide you with a list of the applications that will be destroyed as well as a list of the apps that may be automatically restored. Close all of the windows and then press the Next button.
You might be interested:  How To Reset Windows 10 Password Without Logging In

You can check which apps will be removed from your computer.

  • If you’ve recently changed your Windows password, the final confirmation box will include the restoration point you’ve selected, the drive it will impact, and a warning that you should make a password reset CD using a USB drive if you haven’t already. Additionally, you will be given one more opportunity to scan for impacted programs. To begin the procedure, click on the “Finish” button.

Confirm the location of your shop and begin the process.

How To Restore Windows 10 To An Earlier Restore Point

viveknayyar007, a member of the Tom’s Hardware Community, has developed this tutorial for you. You can get a complete list of all of their tutorials on their website. Restore points are snapshots in time of the computer’s current state that may be used to restore the operating system’s settings if those settings have gotten damaged or the operating system has failed to behave as intended. Here’s how to restore Windows 10 to a previous restore point that was created by mistake. A restoration point is automatically created before any changes are made to the system settings or before any programs are installed or uninstalled in Windows 10.

  • It is unlikely that you will ever require the use of a restore point because Windows 10 takes care of this for you automatically.
  • Windows 10 may be restored to a previous restore point from inside the operating system.
  • Right-click the Start button on the desktop window to bring up the context menu.
  • When the Control Panel window appears, make sure that View by Category is selected in the top-right corner of the window.
  • File History may be accessed from the right-hand pane of the System and Security window.
  • From the right pane of the Recovery window, select Open System Recovery from the drop-down menu.
  • On the following screen, click to pick your favorite restoration point from the list of options that appears.
  • On the Confirm your restoration point page, click Finish to complete the process.
  • Wait until Windows 10 automatically recovers to the last restore point you chose and restarts after that.

Windows 10 System Restore

Windows has troubleshooting tools that might assist you in restoring PC functionality.

System Recovery Options

To accomplish a system recovery, follow the procedures outlined below.

  1. Click theStartbutton, then theSettingsbutton to get started. The Settings categories are displayed
  2. Choose Updatesecurity. The update, security, and backup options are displayed
  3. Select Recovery from the drop-down menu
  4. Select an option
  • Reset this computer to its default settings: Windows may be reinstalled while personal files are kept intact. This should only be used in the most severe situations. Alternatively, you may go back to an earlier construction option: Restores Windows to an older version of the operating system. This may or may not work depending on the most recent update you installed
  • Advanced startup: Restart your computer in recovery mode, which will allow you to perform advanced troubleshooting. Advanced startup: Restart your computer in recovery mode, which will allow you to perform advanced troubleshooting.
  1. Click on “Restart now” to begin. Select Troubleshoot from the drop-down menu
  2. Select Advanced options from the drop-down menu
  3. Choose one of the options

This section lists the advanced system recovery options that are currently available.

Advanced Option Description
System Restore Reload an older restored file. Restored files are automatically created each week and before a major upgrade. This is helpful to use for poor computer performance after installing a new device or update.
System Image Recovery Restore a complete copy of your computer system.
Startup Repair Automatically search for and fix issues causing Windows to boot incorrectly.
Command Prompt Load a text-based command line.
Startup Settings Boot Windows in Safe Mode.

Turn on System Protection

Turning on system protection is required before you can restore a prior version of Windows.

  1. Control Panel may be found by typing Control into the search area and selecting it. Your computer’s settings are displayed
  2. Click System and Security
  3. Click System
  4. Click Advanced system settings
  5. Click theSystem Protectiontab
  6. And then click OK to close the window. Select Configure from the Protection Settings drop-down menu. Turn on system protection by selecting it and clicking OK or Apply.

Create a Restore Point

Here’s how to establish a restore point on your computer.

  1. From the System Protection tab, select Create from the Protection Settings drop-down menu. Create a restore point by entering a description in the text box provided.

Restore from a Restore Point

The methods below will guide you through restoring Windows to the prior day’s version.

  1. From the System Protection menu, select System Restore and then click Next. Choose a restoration point and then click Next. The restore point and system restoration should be confirmed before clicking Finish. Once a system restoration process has begun, it is impossible to halt it. Once your computer has finished restoring the files and data, press the Restart button.

FREE Quick Reference

For a free copy to share with our compliments, please click here; we hope you will consider our paid training program.

How to Use System Restore in Windows

One of the most useful applications accessible to you in Windows is the System Restore tool. Using the System Restore tool is typically a good first step when you’re trying to solve a big problem with your computer. In a word, the Windows System Restore program allows you to restoration your computer’s software, registry, and driver configurations to a prior point in time, referred to as a restore point. It’s the equivalent of “undoing” the most recent significant update to Windows, restoring your machine to the state it was in when the restore point was made.

  1. It also helps that it is really simple to accomplish.
  2. Simply follow these simple instructions to use System Restore to restore Windows to a prior, presumably operational, state: The method by which you access System Restore varies depending on whatever Windows version you are using.
  3. See What Version of Windows Do I Have?
  4. If you’re not sure, just ask.

How to Use System Restore in Windows 11, 10, 8, or 8.1

  1. Start by navigating to the Control Panel. If this is your first time, you may refer to the attached how-to, or you can just search for it using the Windows search box or the Windows 8/8.1 Charms Bar to find it. Our goal is to access the System applet in Control Panel, which can be accomplished relatively quickly through the Power User Menu, but only if you are using a keyboard or mouse to navigate. Press WIN+X or right-click the Start button and choose System from the pop-up menu. If you decide up taking this route, you may skip to Step 4: SelectSystem and Securityfrom inside Control Panel. If your Control Panel view is set to eitherLarge icons or Small icons, you will not be able to see System and Security. Instead, select System and then proceed to Step 4 without pausing. Pick System from the newly opened System and Securitywindow
  2. Then select System protection
  3. And finally click OK. System Restore may be found in theSystem Propertieswindow that displays once you click on it. Check to check that you’re on theSystem Protectiontab, and then selectNext from the System Restore box titledRestore system data and settings if you don’t see it right away. Depending on whether you’ve already conducted a System Restore, you may be presented with the options to Undo System Restore and Choose a different restore point. SelectChoose a different restore point if you are not here to reverse a previous restore point
  4. Select the restore point you wish to use from those shown in the drop-down menu. Alternatively, you may select the Show additional restore pointscheckbox if you want to see previous restoration points. As long as this option is ticked, all restore points that are still active in Windows will be shown in this section. Unfortunately, there is no way to “restore” previously created restore points once they have been deleted. The oldest restore point provided is the most recent point in time to which you may restore Windows
  5. After you have picked your desired restore point, click on theNextbutton to proceed
  6. The Confirm your restoration pointwindow will appear
  7. Confirm the restore point you wish to use there, and then selectFinish. If you’re wondering about what applications, drivers, and other components of Windows 11/10/8/8.1 will be impacted by this System Restore on your machine, you may use theScan for affected programslink on this page prior to performing the System Restore. The report is for informative purposes only, but it may be useful in your troubleshooting efforts if this System Restore does not resolve the issue you are attempting to resolve. Choose Yes, indeed, to the System Restore cannot be stopped after it has been initiated. Are you sure you want to proceed? question. Remember that if you are running System Restore from Safe Mode, the modifications it makes to your computer will not be reversed once they have been made. Don’t be put off by this
  8. Odds are that if you’re performing a System Restore from this point, it’s because Windows isn’t starting correctly, leaving you with few other alternatives. In any case, it’s something you should be mindful of. As part of a System Restore, your computer may restart, so make sure to close any programs that may be open at the time. Step 7: Select a restore point from which you want Windows to be restored to its previous state. System Restore will now begin restoring Windows to the condition it was in at the date and time that you specified in Step 7. Afterwards, you’ll see a little System Restorewindow with the message “Preparing to restore your system,” following which Windows will shut down nearly completely. Following that, you’ll get a warning saying “Please wait while your Windows data and settings are being restored” on an empty screen. System Restore is initializing., System Restore is restoring the registry., and System Restore is deleting temporary files are all examples of messages that will display beneath the system restore button. Overall, this should take no more than 15 minutes to do. This is the actual System Restore procedure that you’re watching unfold in front of you. Keep your computer from being turned off or restarted during this period. Wait for your computer to restart before continuing. Log in to Windows in the same way you always have. Then, if you don’t use the Desktop and you aren’t immediately shifted there, navigate to that location. On your desktop, you should see a little System Restore box that says “Restore System to a previous state.” “The System Restore procedure was finished successfully. The system has been brought back up. Your papers have not been harmed in any way “in addition to this, if you have any questions, please don’t hesitate to contact me at [email protected] SelectClose

Now that the System Restore has been completed, double-check to see if the issue you were attempting to resolve has been successfully resolved. The following options are available if System Restore does not resolve the issue: a) repeat the procedures above, selecting an even older restore point if one is available; or b) continue troubleshooting the issue. It is possible to undo this System Restore if it resulted in a further problem, provided that it was not conducted in Safe Mode (see theImportantcall-out in Step 10).

How to Use System Restore in Windows 7 or Windows Vista

  1. Navigate to theStartAll ProgramsAccessoriesSystem Toolsprogram group
  2. SelectSystem Restore from the drop-down menu
  3. And then press Next on theRestore system files and settingswindow that should appear on the screen. If you see two options on this page, such as Recommended restoration and Choose a different restore point, choose the second option from the drop-down menu. Select a different restore point if necessary. Before clicking Next, make sure that the restore point that has been pre-selected is the one you wish to use
  4. Otherwise, click Cancel. Select the restoration point that you wish to utilize from the list. Ideally, you’d want to select the one that occurred just before you became aware of the problem you’re attempting to correct, rather than one that occurred later. Any restore points that youmanuallycreated, scheduled restore points that Windowsautomaticallycreated, and any restore points that were made automaticallyduring the installation of certain apps will all be shown in this section. System Restore will not be able to undo modifications made to Windows that occurred before a restore point was created for that date. If necessary, select Show more restore points or Show restore points older than 5 days from the drop-down menu. To display more than the most recent restoration points, use the checkbox. Even if there is a chance that there are any, it is worth investigating if you need to go that far back in time. To begin the System Restore, selectNext
  5. Then pressFinishon theConfirm your restore pointwindow to confirm your restore point. Please save any work you might have open in other applications before proceeding with the System Restore since Windows will shut down to finish the process. When asked if System Restore can be halted, choose Yes. System Restore cannot be interrupted once it has begun. Are you sure you want to proceed? a dialogue box When you click on System Restore in Step 4, Windows will now be restored to the state that was captured in the restore point you selected in Step 4. It is possible that the System Restore procedure will take several minutes, as shown by the warning “Please wait while your Windows data and settings are being restored.” When the process is complete, your computer will reboot as usual. Following the reboot, you should receive a notice stating that System Restore has been done successfully as soon as you connect onto your computer. SelectClose
You might be interested:  How To Record A Video On Windows 10

Inspect your system and check if the problem with Windows 7 or Windows Vista that you were investigating has been resolved as a result of this System Restore. You can try repeating the procedures above and selecting another restore point if one is available. If the problem still continues, you can try a different restore point. When a system restore is performed, you may always undo the individual System Restore that created the problem.

How to Use System Restore in Windows XP

  1. Take a stroll over to StartAll ProgramsAccessoriesSystem Tools and press Enter. Select System Restore from the drop-down menu. Select the option to Restore my computer to a previous time and then click Next. Select a day from the calendar on the left to reserve your spot. The dates that are available are those on which a restore point was established, and they are highlighted in bold. It is not possible to use System Restore to undo changes made to Windows XP at a time when no restore point is available. Now that a date has been selected, select a specific restore point from the list on the right
  2. Press Next
  3. And then select Next on theConfirm Restore Point Selectionwindow that appears. As part of the System Restore procedure, Windows XP will be forced to shut down. Make a backup of any files you have open before proceeding
  4. System Restore will now restore Windows XP to the state it was in when the restore point you selected in Step 5 was created, including the registry, drivers, and other vital items. Depending on your computer, this might take several minutes. Once the restart is complete, log in as you normally would. You should see aRestoration Completewindow, from which you can selectCloseon the assumption that everything went according to plan.

You may now check to see if the System Restore procedure was successful in resolving the Windows XP issue you were attempting to resolve.

If it doesn’t work, you may always try restoring from a previous restore point if you have one. If you find that the System Restore has made problems worse, you may simply reverse the process.

More About System RestoreRestore Points

The Windows System Restore application will have no effect on any of your non-system files, such as documents, music, video, emails, and other such items. Try a file recovery application instead, if you were expecting that Windows System Restore would be able to restore or “undelete” any deleted non-system data in the first place. Typically, restore points are not required to be setup manually. Assuming System Restore is enabled and functioning properly, Windows, as well as other programs, should create restore points on a regular basis at crucial junctures such as before to applying a patch, prior to installing a new software, and so on.

restoration points and how they function will be discussed in greater depth.

rstrui.exe is available for download here.

Thank you for informing us about this!

How to Factory Reset Windows 10 or Use System Restore

Are you using Windows 10 and experiencing difficulties? Perhaps malware has wreaked havoc on your PC, or things are simply functioning sluggish in general. It’s possible that you’re considering selling your PC. Fortunately, Windows 10 has the following tools to assist you: System Restore and Factory Reset are two applications that allow you to quickly and simply restore and refresh your computer. Here’s how to restore and reset Windows 10 to its factory settings. It is expected that you will see all of the drive partitions when you start File Explorer.

  1. One of these is the recovery partition, which is used by Windows 10 to reset and reinstall the operating system.
  2. Sure, deletion, in conjunction with file compression, can save up to 6GB on 64-bit Windows 10 computers, but the recovery partition is critical for getting your computer back up and running after a catastrophic crash or malfunction.
  3. Keep the recovery partition intact and use the secondary storage to store personal data and applications.
  4. When it comes to dealing with the great majority of difficulties, the refresh and reset options should be sufficient as long as you make the appropriate choice between doing a system restore and refreshing Windows.

How to Do a System Restore in Windows 10

If you’re experiencing speed issues with Windows 10, the first thing you should check is your list of restore points for possible causes. If one of these dates corresponds to the period that Windows began to behave improperly, you may use the System Restore program to restore the settings and applications that were in effect at the time of the misbehavior. Build a restore point by going to Start (or pressing Windows key + I to get to Settings) and typing create a restore point in the search box.

  1. The restore functionality of the system is activated as a result of this activity.
  2. To select how much room to allocate, move the slider to the right.
  3. Create a restore point now that you’re ready.
  4. The system protection program will generate a restore point, which you may access at any time by pressing the System Restorebutton on your computer’s desktop.
  5. Depending on your situation, you may have to take some time to go over what will be affected so that you can reinstall software and, ideally, avoid any programs that were the source of the problem that prompted you to utilize System Restore.

It should be noted that System Restore is not without flaws. It is possible that reverting to a previous restore point will not function; thus, go to our list of things to check when System Restore does not work.

Accessing Advanced Startup

What happens if you need to revert to a previously stored restore point but are unable to boot into Windows 10? The answer comes in the form of Advanced Startup (AS) (accessible on a working system throughSettingsRecovery). If your computer is not starting up, you will need to access Advanced Startup by following the instructions provided by the PC maker. For example, on HP PCs, this would be accomplished by hitting F11 to initiate the System Recovery mode as soon as your computer begins to start.

Select TroubleshootAdvanced Options from the Advanced Startup menu.

The result is that System Restore is the quickest remedy; at the same time, however, it is also the least trustworthy alternative.

How to Refresh Windows 10

Was returning to a previous restore point not enough to remedy the issues you were experiencing with your computer? It’s possible that you’ll need to refresh your settings. Do you remember how your machine looked when you first got it or when you first loaded Windows 10 on it? That is exactly what you will receive. In contrast to a full Windows 10 system reset, you will be able to save your personal data and settings after doing this procedure. It is, however, a good idea to sync them to the cloud regardless of whether or not you do so.

  • UnderReset this PC, select Get Started from the drop-down menu and select the Keep my files option.
  • If you’re satisfied, you may advance with theReset.
  • The length of time it takes will be determined on the number of applications you have installed.
  • If your computer is running slowly and frequently crashes or freezes, this is the option you should choose to fix the problem.

How to Reset Windows 10 to Factory Settings

When it comes to restoring Windows 10 to its former glory, the “nuclear option” is to reset the operating system, just like you would a smartphone or tablet. This step resets the operating system to its “factory settings,” making it appear as though it were completely fresh. As a result, you will need to make a backup of your personal information in advance. Unfortunately, any bloatware that you have deleted will be reinstalled on your computer. In my opinion, this is a compelling case against performing a factory reset.

When you want to restore Windows 10 to its factory settings, go to StartSettingsUpdateSecurityRecoveryand click the Get startedbutton under Reset this PC once more. However, this time choose the option “Remove everything.” In this case, there are two options:

  • Simply delete my files to perform a fast reset
  • Remove data and clear the disk, which is a more time-consuming but more secure method

To perform a fast reset, simply delete my files. A slower, more secure approach is to remove data and clear the disk.

Factory Reset and System Restore Made Easy

Regardless of whether you need to create or restore a System Restore point, the procedure should be clear by this stage. Additionally, you should be able to refresh Windows 10 in order to make it run more quickly, and you should be able to utilize the reset option to produce a freshened-up operating system that is as good as new. Making frequent data backups is a good idea regardless of whether you have access to System Restore, the ability to refresh and reset your PC, or the ability to boot from a Windows PE rescue CD.

  1. You might also want to keep an eye on your Windows Experience Index to see how well your PCs are performing on a regular basis.
  2. Can you still rely on NordVPN, to get to the heart of the matter?
  3. Christian Cawley is a writer and poet (1562 Articles Published) Deputy Editor for Security, Linux, DIY, programming, and Tech Explained, as well as producer of the Really Useful Podcast.
  4. Christian, a contributor to Linux Format magazine, is a Raspberry Pi tinkerer, a Lego enthusiast, and a vintage gaming enthusiast.

Subscribe to our newsletter

Sign up for our newsletter to receive tech tips, reviews, free ebooks, and special offers! To become a subscriber, please visit this page.

How to use System Restore in Windows 10

The ability to go back in time and change our actions is something we’ve all hoped for, and due to the System Restore tool on your computer, this is truly feasible. This produces “restore points,” which are used as a failsafe if a significant change happens on your computer’s operating system. The System Restore feature in Windows 10 may be used to roll back the clock to a time before the troubles began, while keeping your important data safe in the process. System Restore will be demonstrated in this lesson, and how it may be used to restore your computer’s performance to its pre-accident state.

1. Enable System Restore

System Restore isn’t really enabled by default in Windows 10, so you’ll have to do something to make it work properly. Start by pressing Start, then type ‘Create a restore point’ into the search box and choose the top result. Upon clicking this, the System Properties window will be displayed, with the System Protection option selected. Choose Configure from the drop-down menu after selecting your system drive (typically C).

Then, in the pop-up box that displays, select “Enable system protection.” On the System Properties box, click Apply, then OK, and then OK again to close it. This will activate System Restore and allow it to begin safeguarding your machine as soon as it is enabled.

2. Create a restore point

The advantage of System Restore is that it produces restore points on its own if it detects a significant change in the system. Although it’s not always necessary to manually make a restore point, there are some instances when it’s a good idea, such as before installing a new software. In the same way as previously, select Start, type “Create a restore point,” and click the first result that appears. Create a new system protection policy by selecting it from the System Protection tab. You will then be invited to name the restore point; choose something descriptive that will be useful if you ever need to restore your PC back to this point in the future.

After you’ve completed this step, click Create.

3. Restore your PC to an earlier point

It is possible to restore your computer to an earlier state in a variety of ways by using System Restore. Utilizing the System Properties box, which we’ve been using in the previous phases, select System Restore as the most straightforward option. After clicking Next, select a restore point from the drop-down menu that appears on the screen. You should click “Scan for impacted programs” before proceeding to the next step. This will allow you to discover which applications (if any) will be prevented from being installed when using this restore point.

4. Use System Restore in Safe Mode

System Restore can be prevented from functioning correctly in some cases by factors such as a malfunctioning driver or software. In these types of situations, it’s better to boot into Windows Safe Mode, which runs a stripped-down version of the operating system that removes anything that could be causing the problem. Start by clicking Start, then type “Change advanced startup options” into the search box and pick the top-ranked result. From the “Advanced startup” section of the settings box that displays, select “Restart now” from the drop-down menu.

The System Restore utility should then be available to you as usual.

5. Can’t boot into Windows? There’s a solution

The result of an improperly changed Registry item, for example, might result in your computer’s inability to boot into Windows in some situations. But don’t worry, you can still use System Restore to get everything back to normal. First and foremost, your computer must be turned off. Hold the power button until the Windows logo appears, and then press and hold it until the computer is turned off. Continue to perform this for a total of two more times until you reach the Windows Recovery Environment.

6. Software incompatibilities

In the event that System Restore is incompatible with specific apps on your computer, it may fail to work properly. A application that affects the Windows operating system itself – such as virus scanners, registry cleaners, and the like – is frequently found to be the source of the problem. In the event that you’ve ran one of these applications and it has instructed you to deactivate System Restore, there’s a significant probability that it may cause a problem when you attempt to run Microsoft’s restoration tool later on.

Fortunately, the remedy is rather basic – simply deactivate these apps for a short period of time while you perform System Restore. Simply restart them after you’ve returned to the restore point, and you’ll be set to go once more.

7. A corrupt system (restore)

Even if a restore point appears to have been successfully made, it is possible that it has been corrupted. As a result of step 6, incompatible software may have been included in the restore point, resulting in this situation. Open the System Protection box, then select System Restore from the drop-down menu, and then click Next. From here, you may opt to ignore the most recent restore point and instead restore from the one that came before it. If it solves the problem, it is probable that any software you installed between that restore point and the most recent one is the source of the problem.

You might be interested:  Where Is The Action Center On Windows 10

8. Macrium Reflect Free

Microsoft’s System Restore procedure is adequate, but it does not provide you with a great deal of control. That is sufficient satisfaction for many of us. Give the free edition of Macrium Reflect a shot if you don’t mind getting your hands dirty with some of the more advanced functions it offers. Even though it’s a little more complicated than System Restore, it allows you to create entire backups of your hard drives, schedule backups, and even examine the contents of those copies in Windows Explorer.

It’s rock-solid, dependable, and completely free.

9. Quick Restore Maker

You may have observed that the process of establishing and maintaining restore points involves a significant number of stages. If you wish things were a little bit simpler, Quick Restore Maker is the program for you. This free tool allows you to create a restore point from the context menu of your operating system. Simply right-click on your desktop and select Create Restore Point from the context menu. Additionally, you may build keyboard shortcuts to accomplish the same goal. This is especially useful if you find yourself creating restore points on a regular basis but don’t want to waste time navigating through the menus and windows that come with the standard method.

10. CCleaner

When using CCleaner, the popular system maintenance utility, it is possible to wipe away outdated and unnecessary restore points by using the System Restore tool. The ToolsSystem Restore menu item will appear once you have installed CCleaner. This will show you a list of all of your restore points, along with the date and time they were generated and a brief explanation. To remove one from the list, choose it from the list and then click Remove. CCleaner is useful for a lot more than just keeping track of your restore points.

  • Do you require a new laptop? Here’s where you can find the greatest laptops.

Images courtesy of TechRadar.

How to Use System Restore in Windows 7, 8, and 10

It is a Windows feature that can assist in the repair of some sorts of crashes and other computer problems, according to the manufacturer. Learn how it works, how to set it up, and how to utilize it if something goes wrong with your computer. Although we’ll be using Windows 10 for the sake of this post, System Restore has been around for a long time–and it functions in much the same manner in every version of Windows.

The steps provided here are valid for Windows 7, 8, and 10, and you’ll notice only slight variations in the procedure as you move through it.

What Is System Restore?

A faulty piece of software can cause problems on your system, and it can be difficult to remedy. For example, an app you installed may have broken something critical, or an outdated driver may have caused a driver to malfunction. System Restore allows you to restore your Windows installation to the state in which it was last functional. It accomplishes this by producing “restore points” on a regular basis. Using a restore point, you may take a snapshot of your Windows system files as well as specific program files, registry settings, and device driver configurations.

  1. A restoration point is also created shortly before a big system event, such as installing a new device driver or application or performing a Windows update.
  2. It will restore those system settings, files, and drivers, restoring your underlying Windows system to the configuration it was in previously.
  3. You may wish to delete a device driver if, for example, it causes your computer to become unresponsive after you install the driver.
  4. It is possible to restore your system files to the condition they were in before the problem occurred if you use System Restore and choose a restore point that was made before the driver was installed.
  5. It is possible for programs and updates to cause issues with other apps or even system components, and merely removing the offending app may not be enough to undo the damage.

How Does Using System Restore Affect My Personal Files?

IN CONNECTION WITH: What Is the Most Effective Method of Backing Up My Computer? Backups and System Restore are not the same thing since System Restore works exclusively on your operating system’s underlying Windows system, rather than on everything on your hard drive. As a result, System Restore does not include old versions of your personal data in its image of your computer. When you execute a restore, it will not remove or change any of the personal files that you have on your computer. As a result, don’t rely on System Restore to function as a backup.

Always be sure that you have a robust backup plan in place for all of your sensitive information.

How Does Using System Restore Affect My Apps?

In the event that you restore your computer to a previous restore point, all applications that were installed after that point will be removed. Apps that were installed at the time of the restore point’s creation will remain in place. Apps that you removed after creating that restore point will be reinstalled, but with one very important caveat: they will be restored with a very large proviso. Because System Restore only recovers specific sorts of files, programs that are recovered are frequently unable to function–or are unable to function properly–until their installers are re-run.

A smart approach is to make manual restore points before performing any major installs or configuration changes, so that you can be certain that you will be able to recover from an extremely recent restore point if the need arises.

Can System Restore Remove Viruses or Other Malware?

WHAT’S NEXT: What Is the Best Antivirus Software for Windows 10? (Does Windows Defender Provide Enough Protection?) System Restore is not a reliable technique for eradicating viruses or other malware from your computer. Because dangerous software is frequently hidden in a variety of locations across a computer, you can’t rely on System Restore to completely remove all traces of the infection. A reputable virus scanner that is kept up to date should be relied on in its place instead.

How to Enable System Restore

System Restore protection is often enabled by default for your primary system drive (C:), but not for any other disks on your computer, which is a common occurrence. System Restore is not enabled by default for any disks in the case of the others. There is currently no agreement on the reason for this occurrence. Nothing we can find indicates that it is connected to whether Windows was installed from scratch or updated, how much disk space you have available, what sort of disks you have, or anything else we can figure out about your computer.

  1. In most circumstances, this is all that is required because all of the data that System Restore protects is often stored on the system disk.
  2. To ensure that System Restore is enabled–and that it is enabled for individual drives–hit Start, type “restore,” and then select “Create a restore point,” as shown in the screenshot.
  3. This does not really create a restore point; rather, it just opens the System Restore dialog box, from which you may access all of the available options.
  4. Click on the “Configure” button after selecting a drive from the list in order to enable protection.

If it isn’t already enabled on your system, it will most likely be the first disk you’ll want to enable it for.) Select “Turn on system protection” from the drop-down menu that appears in the “System Protection” dialog box that appears, then set the “Max Usage” slider to the amount of hard disk space you want System Restore to be allowed to utilize before clicking “OK.” After that, you may click “OK” one more time to close the System Properties dialog box.

Just keep in mind that when Windows produces a restore point (or when you manually make one), System Restore will create a restore point on all of the disks that have system protection turned on.

How to Create a Restore Point

As previously stated, System Restore produces restore points on a weekly basis, as well as anytime a large event such as an application or driver installation takes place. You may also make a restore point whenever you wish on your own computer. Start by pressing the Start button, typing “restore,” and then clicking “Create a restore point.” On the “System Protection” tab, select “Create” from the drop-down menu.

Click “Create” once you’ve entered a description for your restore point that will help you recall why you established it. A restore point may be created in as little as 30 seconds, and System Restore will notify you when it has completed its task. To close the window, click “Close.”

How to Restore Your System to an Earlier Restore Point

Okay, so you’ve activated System Restore and have been vigilant about making restore points whenever you make any changes to your computer. When anything goes wrong with your system one fateful day, you’ll want to restore your system to a previous restore point to avoid having to start over from the beginning. It is from the same “System Protection” page where you configured System Restoration parameters that you will initiate the restore procedure. Start by pressing the Start button, typing “restore,” and then clicking “Create a restore point.” On the “System Protection” tab, select “System Restore” from the drop-down menu.

  • To proceed, use the “Next” button.
  • As a result, the only things that will most likely be visible are the automatic weekly restore point and any manual restore points that you have set up.
  • Then select “Scan for impacted applications” to have System Restore look for any apps that will be removed as a result of the operation.
  • When you run System Restore, you will be presented with two lists.
  • The programs and drivers listed at the bottom of the list are those that may be restored by the method.
  • As soon as you’re ready to restore, select the restore point that you’d want to utilize and then press the Next button.
  • Following that, you will be prompted to confirm the repair.
  • To begin, simply click “Yes.” After the computer has restarted, Windows will begin the restoration procedure.
  • It is now necessary to determine whether or not it has remedied the issues you were experiencing.

Additionally, keep in mind that System Restore produces an additional restoration point just before conducting the restore process, so you may always undo your actions by repeating the restore process and picking the new restore point that was created earlier.

Other Ways You Can Fix System Problems

System Restore may not be the best solution for all of your problems, but there are alternative approaches you may take to address some of the difficulties System Restore is intended to address. If you believe that a recent Windows Update was the source of the problem, you may want to consider uninstalling that Windows Update or returning to an earlier “build” of Windows 10. This should resolve any difficulties that may have arisen as a result of Windows Update, as well as any issues that may have arisen with your individual hardware and software.

It is possible to use the System File Checker to search for and repair broken system files if you feel your system files are corrupted–or if you simply want to double-check–but it is not recommended.

How to Boot into Safe Mode on Windows 10 or Windows 8 is a related article (The Easy Way) If Windows is not correctly starting and you are unable to do any of the tasks listed above, you can boot into Safe Mode.

Using Safe Mode might also be beneficial if System Restore is unable to restore your computer to the last restore point you picked for whatever reason.

However, as reader Straspey was kind enough to point out, there is one major caveat.

The following is related to “Reset This PC” in Windows 8 and 10: Everything You Need to Know About It If everything else fails, you can use one of the two recovery tools included with Windows 10.

System Restore is not a panacea, but it is capable of resolving a surprising amount of issues.

While System Restore is usually always worth trying before resorting to more serious steps, it is not always necessary to do so.

Leave a Comment

Your email address will not be published. Required fields are marked *